[llvm] 8d20f2c - Revert "[CodeGenPrepare] Fix isIVIncrement (PR49466)"
Philip Reames via llvm-commits
llvm-commits at lists.llvm.org
Fri Mar 12 16:24:45 PST 2021
On 3/12/21 3:35 PM, Philip Reames via llvm-commits wrote:
>
>
> On 3/12/21 3:22 PM, Philip Reames via llvm-commits wrote:
>>
>>
>> On 3/12/21 2:59 PM, Jordan Rupprecht wrote:
>>>
>>>
>>> On Fri, Mar 12, 2021 at 4:29 PM Philip Reames
>>> <listmail at philipreames.com <mailto:listmail at philipreames.com>> wrote:
>>>
>>> Jordan,
>>>
>>> Please revert this change.
>>>
>>> There's a couple of problems here:
>>>
>>> * The change reverted looks obviously innocent. (e.g. it's
>>> bailing out of a transform slightly more often)
>>>
>>> I don't disagree that it "looks obviously innocent", but the proof
>>> is in the pudding: the reproducer I posted compiles ~instantly at
>>> one commit prior, and times out at the culprit commit. A change
>>> "looking" good should never be a basis for saying it must be correct
>>> and should not be reverted, especially when there is evidence it is
>>> a problem. At least, that's my personal opinion, but I should think
>>> that's a fairly basic and widely held belief.
>>
>> You're correct, but missing the point I was getting at. Admittedly,
>> poorly worded.
>>
>> While looking obviously innocent isn't reason not to revert itself,
>> it's definitely reason to take a slightly closer look and make sure
>> there's nothing else going on. This is particularly relevant given
>> the other points in this discussion.
>>
>>> * The change reverted was itself fixing a functional bug. At
>>> a minimum, we'd need a larger revert to get ToT back to a
>>> sane state.
>>>
>>> The fix is introducing a different bug, and one which seems more
>>> widespread. At the very least, we haven't observed any of the
>>> crashes mentioned in PR49466, but we did notice a compile timeout in
>>> several different compilation units.
>>
>> Bug? Discussion? Response to original commit?
>>
>> Your observation may be true *for you*. It is not necessarily true
>> for anyone else, and you bear the burden of making the case.
>> Particularly when reverting a functional fix.
>>
>> To be clear, I'm not saying you're wrong. I'm saying you haven't
>> given anyone else enough information to tell if you are or not.
>>
>>> * It is generally considered reasonable to provide a test case
>>> and wait a bit before reverting, at least once the patch is
>>> more than a few hours old.
>>>
>>> Sorry about that. I'll concede that I got a little trigger happy
>>> here, but I was hoping that would be waived by the fact that I gave
>>> a simple, concrete reproducer.
>> Thanks for the acknowledgement. To be fair, it would have been less
>> of an issue if the reproducer worked straight forwardly.
>>>
>>> * Failure to provide an IR test case.
>>>
>>> (ditto, but see one below)
>>>
>>> * Your test case does not reproduce. Or at least, it doesn't
>>> reproduce when compiled with clang10 to IR and then run
>>> through (very recent, but without your change) ToT opt -O2.
>>> If there's something specific about the interaction of clang
>>> and opt ToT, reducing this down to a IR test case becomes
>>> particularly important.
>>>
>>> This comment is going *way* off track -- the reproducer I posted
>>> *does* reproduce, at least for me, in the configuration I posted (a
>>> C++ source file, and just "clang -O2"). By saying it doesn't
>>> reproduce in a mixed configuration of an old version of clang to do
>>> the C++ -> IR combined with a ToT version of opt -O2 to do the IR ->
>>> object file is misleading -- it's true, but that's not at all what I
>>> was claiming, and I don't know where it's coming from.
>>
>> I actually don't think this is going off track at all. Our default
>> is for IR test cases for IR problems. Any reverting commit should
>> generally include a test case suitable for checkin (w/a bit of
>> cleanup) once the patch is fixed. I'll admit, we're not strict about
>> this, but the expectation is definitely there.
>>
>> The discussion of the hybrid configuration is relevant *because* you
>> didn't provide a test case in a form I could easily use. I don't
>> work on clang, don't build it regularly, and shouldn't have to
>> investigate a LLVM codegen regression.
>>
>> (See also below.)
>>
>>> Philip
>>>
>>> p.s. To be clear, I'm happy to look at your original issue this
>>> afternoon if you've got something I can reproduce.
>>>
>>> Here's an IR reproducer with IR generated from ToT before my revert
>>> (at dfd27ebbd0eb137c9a439b7c537bb87ba903efd3):
>>
>> Ok, we have a problem here. None of the following reproduce for me:
>>
>> $ ./llc -O2 jordan.ll
>> $ ./llc -O2 jordan.ll
>> $ ./llc -O2 jordan.ll --filetype=obj
>> $ ./llc -O3 jordan.ll --filetype=obj
>>
>> LLC is ToT, just built with your change reverted locally.
>>
>>> $ bin/clang -c /tmp/repro.cc -O1 -S -emit-llvm -o /tmp/repro.ll
>>> $ bin/clang -c /tmp/repro.ll -O2 -o /tmp/repro.o # hangs
>>
>> Given the preceding, I am now asserting this is likely some clang
>> specific problem. I've got a build of clang running now, will report
>> back in a bit.
>>
> With a newly build clang, I can reproduce what you're seeing. However,
> no attempt to mine to get IR out clang - I'm no expert here - has
> generated anything standalone reproducible in IR.
>
> Looking at debug output does make it look the transform affected by
> the revert is involved in the infinite loop, but I *strongly* suspect
> the actual revert is just massaging the issue enough to avoid
> something lurking.
>
> I will spend some time this afternoon investigating this.
>
JFYI, found the root issue. As expected, it wasn't directly related to
the reverted change.
Instead, it appears to be a bug introduced with d9e93e8e57 early last
week. I'll work up a fix and land it, probably tomorrow. There's one
more interaction I want to make sure I understand, and I'm out of time
for today.
> I would strongly suggest you follow up with clang folks to figure out
> why clang and llc are not matching behavior. That's a serious problem.
>
>> The other option is that this is someway specific to your configuration.
>>
>>
>>>
>>> ; ModuleID = '/tmp/repro.cc'
>>> source_filename = "/tmp/repro.cc"
>>> target datalayout =
>>> "e-m:e-p270:32:32-p271:32:32-p272:64:64-i64:64-f80:128-n8:16:32:64-S128"
>>> target triple = "x86_64-unknown-linux-gnu"
>>>
>>> %class.D = type { i64 }
>>> %class.a = type { %class.g }
>>> %class.g = type { i32*, i32* }
>>>
>>> $_ZNK1aIliEixEl = comdat any
>>>
>>> $_ZNK1aIliE1jEv = comdat any
>>>
>>> @o = dso_local local_unnamed_addr global i32 0, align 4
>>> @p = dso_local local_unnamed_addr global i32 0, align 4
>>> @.str = private unnamed_addr constant [1 x i8] zeroinitializer, align 1
>>>
>>> ; Function Attrs: uwtable mustprogress
>>> define dso_local void @_ZN1D1qERK1aIliE(%class.D* nocapture nonnull
>>> dereferenceable(8) %0, %class.a* nonnull align 8 dereferenceable(16)
>>> %1) local_unnamed_addr #0 align 2 {
>>> %3 = call i64 @_ZNK1aIliEixEl(%class.a* nonnull
>>> dereferenceable(16) %1, i64 0) #3
>>> %4 = icmp eq i64 %3, 0
>>> br i1 %4, label %26, label %5
>>>
>>> 5: ; preds = %2
>>> %6 = call i64 @_ZNK1aIliE1jEv(%class.a* nonnull
>>> dereferenceable(16) %1)
>>> %7 = icmp eq i64 %6, 0
>>> br i1 %7, label %26, label %8
>>>
>>> 8: ; preds = %5
>>> %9 = getelementptr inbounds %class.D, %class.D* %0, i64 0, i32 0
>>> br label %10
>>>
>>> 10: ; preds = %8, %18
>>> %11 = phi i64 [ 0, %8 ], [ %23, %18 ]
>>> %12 = call i64 @_ZNK1aIliEixEl(%class.a* nonnull
>>> dereferenceable(16) %1, i64 %11) #3
>>> %13 = icmp eq i64 %12, 0
>>> br i1 %13, label %18, label %14
>>>
>>> 14: ; preds = %10, %14
>>> %15 = load i32, i32* @o, align 4, !tbaa !2
>>> %16 = call i32 @_Z3fn1IiiEiT_T0_PKc(i32 %15, i32 0, i8*
>>> getelementptr inbounds ([1 x i8], [1 x i8]* @.str, i64 0, i64 0))
>>> %17 = icmp eq i32 %16, 0
>>> br i1 %17, label %18, label %14, !llvm.loop !6
>>>
>>> 18: ; preds = %14, %10
>>> %19 = call i64 @_ZNK1aIliEixEl(%class.a* nonnull
>>> dereferenceable(16) %1, i64 %11) #3
>>> %20 = load i32, i32* @p, align 4, !tbaa !2
>>> %21 = sext i32 %20 to i64
>>> %22 = sdiv i64 %19, %21
>>> store i64 %22, i64* %9, align 8, !tbaa !9
>>> %23 = add i64 %11, 1
>>> %24 = call i64 @_ZNK1aIliE1jEv(%class.a* nonnull
>>> dereferenceable(16) %1)
>>> %25 = icmp eq i64 %24, 0
>>> br i1 %25, label %26, label %10, !llvm.loop !12
>>>
>>> 26: ; preds = %18, %5, %2
>>> ret void
>>> }
>>>
>>> ; Function Attrs: nounwind uwtable willreturn mustprogress
>>> define linkonce_odr dso_local i64 @_ZNK1aIliEixEl(%class.a* nonnull
>>> dereferenceable(16) %0, i64 %1) local_unnamed_addr #1 comdat align 2 {
>>> %3 = getelementptr inbounds %class.a, %class.a* %0, i64 0, i32 0,
>>> i32 0
>>> %4 = load i32*, i32** %3, align 8, !tbaa !13
>>> %5 = getelementptr inbounds i32, i32* %4, i64 %1
>>> %6 = load i32, i32* %5, align 4, !tbaa !2
>>> %7 = sext i32 %6 to i64
>>> ret i64 %7
>>> }
>>>
>>> ; Function Attrs: nounwind uwtable willreturn mustprogress
>>> define linkonce_odr dso_local i64 @_ZNK1aIliE1jEv(%class.a* nonnull
>>> dereferenceable(16) %0) local_unnamed_addr #1 comdat align 2 {
>>> %2 = getelementptr inbounds %class.a, %class.a* %0, i64 0, i32 0,
>>> i32 1
>>> %3 = load i32*, i32** %2, align 8, !tbaa !16
>>> %4 = getelementptr inbounds %class.a, %class.a* %0, i64 0, i32 0,
>>> i32 0
>>> %5 = load i32*, i32** %4, align 8, !tbaa !13
>>> %6 = ptrtoint i32* %3 to i64
>>> %7 = ptrtoint i32* %5 to i64
>>> %8 = sub i64 %6, %7
>>> %9 = ashr exact i64 %8, 2
>>> ret i64 %9
>>> }
>>>
>>> declare dso_local i32 @_Z3fn1IiiEiT_T0_PKc(i32, i32, i8*)
>>> local_unnamed_addr #2
>>>
>>> attributes #0 = { uwtable mustprogress "frame-pointer"="none"
>>> "no-trapping-math"="true" "stack-protector-buffer-size"="8"
>>> "target-cpu"="x86-64"
>>> "target-features"="+cx8,+fxsr,+mmx,+sse,+sse2,+x87"
>>> "tune-cpu"="generic" }
>>> attributes #1 = { nounwind uwtable willreturn mustprogress
>>> "frame-pointer"="none" "no-trapping-math"="true"
>>> "stack-protector-buffer-size"="8" "target-cpu"="x86-64"
>>> "target-features"="+cx8,+fxsr,+mmx,+sse,+sse2,+x87"
>>> "tune-cpu"="generic" }
>>> attributes #2 = { "frame-pointer"="none" "no-trapping-math"="true"
>>> "stack-protector-buffer-size"="8" "target-cpu"="x86-64"
>>> "target-features"="+cx8,+fxsr,+mmx,+sse,+sse2,+x87"
>>> "tune-cpu"="generic" }
>>> attributes #3 = { nounwind }
>>>
>>> !llvm.module.flags = !{!0}
>>> !llvm.ident = !{!1}
>>>
>>> !0 = !{i32 1, !"wchar_size", i32 4}
>>> !1 = !{!"clang version 13.0.0
>>> (https://github.com/llvm/llvm-project.git
>>> <https://github.com/llvm/llvm-project.git>
>>> dfd27ebbd0eb137c9a439b7c537bb87ba903efd3)"}
>>> !2 = !{!3, !3, i64 0}
>>> !3 = !{!"int", !4, i64 0}
>>> !4 = !{!"omnipotent char", !5, i64 0}
>>> !5 = !{!"Simple C++ TBAA"}
>>> !6 = distinct !{!6, !7, !8}
>>> !7 = !{!"llvm.loop.mustprogress"}
>>> !8 = !{!"llvm.loop.unroll.disable"}
>>> !9 = !{!10, !11, i64 0}
>>> !10 = !{!"_ZTS1D", !11, i64 0}
>>> !11 = !{!"long", !4, i64 0}
>>> !12 = distinct !{!12, !7, !8}
>>> !13 = !{!14, !15, i64 0}
>>> !14 = !{!"_ZTS1g", !15, i64 0, !15, i64 8}
>>> !15 = !{!"any pointer", !4, i64 0}
>>> !16 = !{!14, !15, i64 8}
>>>
>>> On 3/12/21 1:59 PM, Jordan Rupprecht via llvm-commits wrote:
>>>> Author: Jordan Rupprecht
>>>> Date: 2021-03-12T13:59:14-08:00
>>>> New Revision: 8d20f2c2c66eb486ff23cc3d55a53bd840b36971
>>>>
>>>> URL:https://github.com/llvm/llvm-project/commit/8d20f2c2c66eb486ff23cc3d55a53bd840b36971 <https://github.com/llvm/llvm-project/commit/8d20f2c2c66eb486ff23cc3d55a53bd840b36971>
>>>> DIFF:https://github.com/llvm/llvm-project/commit/8d20f2c2c66eb486ff23cc3d55a53bd840b36971.diff <https://github.com/llvm/llvm-project/commit/8d20f2c2c66eb486ff23cc3d55a53bd840b36971.diff>
>>>>
>>>> LOG: Revert "[CodeGenPrepare] Fix isIVIncrement (PR49466)"
>>>>
>>>> This reverts commit cf82700af8c658ae09b14c3d01bb1e73e48d3bd3 due to a compile timeout when building the following with `clang -O2`:
>>>>
>>>> ```
>>>> template <class, class = int> class a;
>>>> struct b {
>>>> using d = int *;
>>>> };
>>>> struct e {
>>>> using f = b::d;
>>>> };
>>>> class g {
>>>> public:
>>>> e::f h;
>>>> e::f i;
>>>> };
>>>> template <class, class> class a : g {
>>>> public:
>>>> long j() const { return i - h; }
>>>> long operator[](long) const noexcept;
>>>> };
>>>> template <class c, class k> long a<c, k>::operator[](long l) const noexcept {
>>>> return h[l];
>>>> }
>>>> template <typename m, typename n> int fn1(m, n, const char *);
>>>> int o, p;
>>>> class D {
>>>> void q(const a<long> &);
>>>> long r;
>>>> };
>>>> void D::q(const a<long> &l) {
>>>> int s;
>>>> if (l[0])
>>>> for (; l.j(); ++s) {
>>>> if (l[s])
>>>> while (fn1(o, 0, ""))
>>>> ;
>>>> r = l[s] / p;
>>>> }
>>>> }
>>>> ```
>>>>
>>>> Added:
>>>>
>>>>
>>>> Modified:
>>>> llvm/lib/CodeGen/CodeGenPrepare.cpp
>>>>
>>>> Removed:
>>>> llvm/test/CodeGen/X86/pr49466.ll
>>>>
>>>>
>>>> ################################################################################
>>>> diff --git a/llvm/lib/CodeGen/CodeGenPrepare.cpp b/llvm/lib/CodeGen/CodeGenPrepare.cpp
>>>> index 0f698dd3b190..0b1156e2ace7 100644
>>>> --- a/llvm/lib/CodeGen/CodeGenPrepare.cpp
>>>> +++ b/llvm/lib/CodeGen/CodeGenPrepare.cpp
>>>> @@ -1332,7 +1332,7 @@ getIVIncrement(const PHINode *PN, const LoopInfo *LI) {
>>>>
>>>> static bool isIVIncrement(const BinaryOperator *BO, const LoopInfo *LI) {
>>>> auto *PN = dyn_cast<PHINode>(BO->getOperand(0));
>>>> - if (!PN || LI->getLoopFor(BO->getParent()) != LI->getLoopFor(PN->getParent()))
>>>> + if (!PN)
>>>> return false;
>>>> if (auto IVInc = getIVIncrement(PN, LI))
>>>> return IVInc->first == BO;
>>>> @@ -1347,7 +1347,6 @@ bool CodeGenPrepare::replaceMathCmpWithIntrinsic(BinaryOperator *BO,
>>>> if (!isIVIncrement(BO, LI))
>>>> return false;
>>>> const Loop *L = LI->getLoopFor(BO->getParent());
>>>> - assert(L && "L should not be null after isIVIncrement()");
>>>> // Do not risk on moving increment into a child loop.
>>>> if (LI->getLoopFor(Cmp->getParent()) != L)
>>>> return false;
>>>>
>>>> diff --git a/llvm/test/CodeGen/X86/pr49466.ll b/llvm/test/CodeGen/X86/pr49466.ll
>>>> deleted file mode 100644
>>>> index 4f6574d9bbf2..000000000000
>>>> --- a/llvm/test/CodeGen/X86/pr49466.ll
>>>> +++ /dev/null
>>>> @@ -1,122 +0,0 @@
>>>> -; RUN: opt < %s -O2 -codegenprepare -S | FileCheck %s
>>>> -
>>>> -target datalayout = "e-m:e-p270:32:32-p271:32:32-p272:64:64-i64:64-f80:128-n8:16:32:64-S128"
>>>> -target triple = "x86_64-unknown-linux-gnu"
>>>> -
>>>> - at b = dso_local local_unnamed_addr global i64 0, align 8
>>>> - at c = dso_local local_unnamed_addr global i64 0, align 8
>>>> - at d = dso_local local_unnamed_addr global i64 0, align 8
>>>> - at e = dso_local local_unnamed_addr global i64 0, align 8
>>>> - at f = dso_local local_unnamed_addr global i64 0, align 8
>>>> - at g = dso_local local_unnamed_addr global i64 0, align 8
>>>> -
>>>> -; CHECK-LABEL: @m(
>>>> -
>>>> -define dso_local i32 @m() local_unnamed_addr {
>>>> -entry:
>>>> - %0 = load i64, i64* @f, align 8
>>>> - %1 = inttoptr i64 %0 to i32*
>>>> - %2 = load i64, i64* @c, align 8
>>>> - %conv18 = trunc i64 %2 to i32
>>>> - %cmp = icmp slt i32 %conv18, 3
>>>> - %3 = load i64, i64* @d, align 8
>>>> - %conv43 = trunc i64 %3 to i8
>>>> - %tobool40.not = icmp eq i8 %conv43, 0
>>>> - br label %for.cond
>>>> -
>>>> -for.cond: ; preds = %for.cond39.preheader, %entry
>>>> - %j.0 = phi i32 [ undef, %entry ], [ %j.1.lcssa, %for.cond39.preheader ]
>>>> - %p.0 = phi i64 [ undef, %entry ], [ %p.1.lcssa, %for.cond39.preheader ]
>>>> - %i.0 = phi i32 [ undef, %entry ], [ %i.1.lcssa, %for.cond39.preheader ]
>>>> - %cmp73 = icmp slt i32 %i.0, 3
>>>> - br i1 %cmp73, label %for.body.preheader, label %for.cond39.preheader
>>>> -
>>>> -for.body.preheader: ; preds = %for.cond
>>>> - br label %for.body
>>>> -
>>>> -for.cond1.loopexit: ; preds = %for.inc34.preheader, %for.end12
>>>> - br i1 %cmp, label %for.body, label %for.cond39.preheader.loopexit
>>>> -
>>>> -for.cond39.preheader.loopexit: ; preds = %for.cond1.loopexit
>>>> - br label %for.cond39.preheader
>>>> -
>>>> -for.cond39.preheader: ; preds = %for.cond39.preheader.loopexit, %for.cond
>>>> - %j.1.lcssa = phi i32 [ %j.0, %for.cond ], [ %conv18, %for.cond39.preheader.loopexit ]
>>>> - %p.1.lcssa = phi i64 [ %p.0, %for.cond ], [ 0, %for.cond39.preheader.loopexit ]
>>>> - %i.1.lcssa = phi i32 [ %i.0, %for.cond ], [ %conv18, %for.cond39.preheader.loopexit ]
>>>> - br i1 %tobool40.not, label %for.cond, label %for.inc42.preheader
>>>> -
>>>> -for.inc42.preheader: ; preds = %for.cond39.preheader
>>>> - br label %for.inc42
>>>> -
>>>> -for.body: ; preds = %for.body.preheader, %for.cond1.loopexit
>>>> - %l.176 = phi i8 [ %sub, %for.cond1.loopexit ], [ 0, %for.body.preheader ]
>>>> - %p.175 = phi i64 [ 0, %for.cond1.loopexit ], [ %p.0, %for.body.preheader ]
>>>> - %j.174 = phi i32 [ %conv18, %for.cond1.loopexit ], [ %j.0, %for.body.preheader ]
>>>> - %tobool.not = icmp eq i32 %j.174, 0
>>>> - br i1 %tobool.not, label %cleanup45, label %for.cond2.preheader
>>>> -
>>>> -for.cond2.preheader: ; preds = %for.body
>>>> - %tobool3.not69 = icmp eq i64 %p.175, 0
>>>> - %.pr.pre = load i64, i64* @e, align 8
>>>> - br i1 %tobool3.not69, label %for.end12, label %for.body4.preheader
>>>> -
>>>> -for.body4.preheader: ; preds = %for.cond2.preheader
>>>> - %4 = sub i64 0, %p.175
>>>> - %xtraiter = and i64 %4, 7
>>>> - %lcmp.mod.not = icmp eq i64 %xtraiter, 0
>>>> - br i1 %lcmp.mod.not, label %for.body4.prol.loopexit, label %for.body4.prol.preheader
>>>> -
>>>> -for.body4.prol.preheader: ; preds = %for.body4.preheader
>>>> - %5 = mul nsw i64 %xtraiter, -1
>>>> - br label %for.body4.prol
>>>> -
>>>> -for.body4.prol: ; preds = %for.body4.prol.preheader, %for.body4.prol
>>>> - %lsr.iv = phi i64 [ 0, %for.body4.prol.preheader ], [ %lsr.iv.next, %for.body4.prol ]
>>>> - %lsr.iv.next = add nsw i64 %lsr.iv, -1
>>>> - %prol.iter.cmp.not = icmp eq i64 %5, %lsr.iv.next
>>>> - br i1 %prol.iter.cmp.not, label %for.body4.prol.loopexit.loopexit, label %for.body4.prol
>>>> -
>>>> -for.body4.prol.loopexit.loopexit: ; preds = %for.body4.prol
>>>> - %6 = sub i64 %p.175, %lsr.iv.next
>>>> - br label %for.body4.prol.loopexit
>>>> -
>>>> -for.body4.prol.loopexit: ; preds = %for.body4.prol.loopexit.loopexit, %for.body4.preheader
>>>> - %p.270.unr = phi i64 [ %p.175, %for.body4.preheader ], [ %6, %for.body4.prol.loopexit.loopexit ]
>>>> - %7 = icmp ugt i64 %p.175, -8
>>>> - br i1 %7, label %for.end12, label %for.body4.preheader89
>>>> -
>>>> -for.body4.preheader89: ; preds = %for.body4.prol.loopexit
>>>> - br label %for.body4
>>>> -
>>>> -for.body4: ; preds = %for.body4.preheader89, %for.body4
>>>> - %p.270 = phi i64 [ %inc11.7, %for.body4 ], [ %p.270.unr, %for.body4.preheader89 ]
>>>> - %inc11.7 = add i64 %p.270, 8
>>>> - %tobool3.not.7 = icmp eq i64 %inc11.7, 0
>>>> - br i1 %tobool3.not.7, label %for.end12.loopexit, label %for.body4
>>>> -
>>>> -for.end12.loopexit: ; preds = %for.body4
>>>> - br label %for.end12
>>>> -
>>>> -for.end12: ; preds = %for.end12.loopexit, %for.body4.prol.loopexit, %for.cond2.preheader
>>>> - %8 = load i32, i32* %1, align 4
>>>> - %conv23 = zext i32 %8 to i64
>>>> - %9 = load i64, i64* @b, align 8
>>>> - %div24 = udiv i64 %9, %conv23
>>>> - store i64 %div24, i64* @b, align 8
>>>> - %sub = add i8 %l.176, -1
>>>> - %tobool32.not72 = icmp eq i64 %.pr.pre, 0
>>>> - br i1 %tobool32.not72, label %for.cond1.loopexit, label %for.inc34.preheader
>>>> -
>>>> -for.inc34.preheader: ; preds = %for.end12
>>>> - store i64 0, i64* @e, align 8
>>>> - br label %for.cond1.loopexit
>>>> -
>>>> -for.inc42: ; preds = %for.inc42.preheader, %for.inc42
>>>> - br label %for.inc42
>>>> -
>>>> -cleanup45: ; preds = %for.body
>>>> - %cmp13 = icmp ne i8 %l.176, 0
>>>> - %conv16 = zext i1 %cmp13 to i32
>>>> - ret i32 %conv16
>>>> -}
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> llvm-commits mailing list
>>>> llvm-commits at lists.llvm.org <mailto:llvm-commits at lists.llvm.org>
>>>> https://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-commits <https://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-commits>
>>>
>>
>> _______________________________________________
>> llvm-commits mailing list
>> llvm-commits at lists.llvm.org
>> https://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-commits
>
> _______________________________________________
> llvm-commits mailing list
> llvm-commits at lists.llvm.org
> https://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-commits
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.llvm.org/pipermail/llvm-commits/attachments/20210312/bb478626/attachment.html>
More information about the llvm-commits
mailing list