[LLVMdev] Help!!!!Help!!!! " LLVM ERROR: Cannot select: 0x9fc9680: i32 = fp32_to_fp16 0x9fc0750 [ID=16] " problem!!!!!!!!!!!!!!!!!!

[yalong at multicorewareinc.com]

Hi Daniel,    Thank you your replying.     Yes, the problem is about MIPS backend. You give me this message "There is limited support for the <8 x f16> type when MSA (MIPS SIMD Architecture) is enabled but even then scalar half-precision is not currently supported."  Could you give me some official link or some evidence? Thank you very much.
Robin


yalong at multicorewareinc.com
 From: Daniel SandersDate: 2014-07-09 02:05To: yalong at multicorewareinc.com; Kevin QinCC: llvmdevSubject: RE: [LLVMdev] Help!!!!Help!!!! " LLVM ERROR: Cannot select: 0x9fc9680: i32 = fp32_to_fp16 0x9fc0750 [ID=16] "	problem!!!!!!!!!!!!!!!!!!







Hi,
 
NEON is an ARM feature and is therefore not supported by MIPS so I assume you are trying to achieve the same effect. As far as I know, the MIPS backend doesn't support half-precision
 floating point at the moment.
 
There is limited support for the <8 x f16> type when MSA (MIPS SIMD Architecture) is enabled but even then scalar half-precision is not currently supported.
 



From: llvmdev-bounces at cs.uiuc.edu [mailto:llvmdev-bounces at cs.uiuc.edu]
On Behalf Of yalong at multicorewareinc.com

Sent: 09 July 2014 23:31

To: Kevin Qin

Cc: llvmdev

Subject: Re: [LLVMdev] Help!!!!Help!!!! " LLVM ERROR: Cannot select: 0x9fc9680: i32 = fp32_to_fp16 0x9fc0750 [ID=16] " problem!!!!!!!!!!!!!!!!!!


 

    Thank you Kevin!!!


    If I use fptrunc and bitcast realise NEON vcvtt ( I can sure, "fptrunc  double %tmp to float" is right, but "fptrunc float %tmp to half" is wrong). My target
 platform is MIPS.  The command as following:


 


NEON:    


        vcvtt.f16.f32 s2, s0









llvm Code:




%Vt_2 = load float* %VFP_s0, align 4 

%Vt3_1 = fptrunc float %Vt_2 to half 

%Vt4_1 = bitcast half %Vt3_1 to i16 

%Vt2_2 = bitcast float* %VFP_s2 to <2 x i16>* 

%Vrti_1 = load <2 x i16>* %Vt2_2, align 4 

%Vrti_2 = insertelement <2 x i16> %Vrti_1, i16 %Vt4_1, i32 1 

%Vt2_3 = bitcast float* %VFP_s2 to <2 x i16>* 

store <2 x i16> %Vrti_2, <2 x i16>* %Vt2_3, align 4 






 


Error Log:



LLVM ERROR: Cannot select: 0x9f554b0: ch = store 0x9d0f28c, 0x9f5d900, 0x9f54ba8, 0x9f54b20<ST2[FixedStack0](align=4), trunc to f16> [ID=52] 

0x9f5d900: f32,ch = load 0x9f5e290, 0x9f5dd40, 0x9f54b20<LD4[%sunkaddr69]> [ORD=1810] [ID=51] 

0x9f5dd40: i32 = add 0x9f55318, 0x9f5e0f8 [ORD=1808] [ID=31] 

0x9f55318: i32,ch = CopyFromReg 0x9d0f28c, 0x9f6a3a0 [ORD=1796] [ID=26] 

0x9f6a3a0: i32 = Register %vreg32 [ORD=1796] [ID=1] 

0x9f5e0f8: i32 = Constant<64> [ORD=1808] [ID=17] 

0x9f54b20: i32 = undef [ORD=1797] [ID=6] 

0x9f54ba8: i32 = FrameIndex<0> [ID=24] 

0x9f54b20: i32 = undef [ORD=1797] [ID=6] 

In function: testVCVTT32TO16Function 



 


 







yalong at multicorewareinc.com





 




From: Kevin
 Qin


Date: 2014-07-09 00:03


To: yalong at multicorewareinc.com


CC: llvmdev


Subject: Re: [LLVMdev] Help!!!!Help!!!! " LLVM
 ERROR: Cannot select: 0x9fc9680: i32 = fp32_to_fp16 0x9fc0750 [ID=16] " problem!!!!!!!!!!!!!!!!!!






Hi,

 


Can you show us the command line you are using? At least can you tell us the backend you tried on? If you can upload the test case as well, it will be very useful
 to find out the problem.


 


 


Regards,


Kevin



 

2014-07-10 1:53 GMT+08:00
yalong at multicorewareinc.com <yalong at multicorewareinc.com>:


Hi all, 


    I am new to llvm. I need help. Thank you every!


 


    I want to realize vcvtt.f16.f32  NEON instruction by llvm. This instruction covert top-16bits of a single type to f16. I use the intrinsics function llvm.convert.to.fp16,
 but cannot llc , I meet is following problem :


 


LLVM ERROR: Cannot select: 0x9fc9680: i32 = fp32_to_fp16 0x9fc0750 [ID=16]


0x9fc0750: f32,ch = load 0x3aafd68, 0x9fc2a20, 0x9feaab0<LD4[%sunkaddr85033]> [ORD=125117] [ID=15]


0x9fc2a20: i32 = add 0x9fed880, 0x9fd9ea0 [ORD=125115] [ID=13] 

0x9fed880: i32,ch = CopyFromReg 0x3aafd68, 0x9fbea90 [ORD=125114] [ID=9] 

0x9fbea90: i32 = Register %vreg13999 [ORD=125114] [ID=1] 

0x9fd9ea0: i32 = Constant<80> [ORD=125115] [ID=2] 

0x9feaab0: i32 = undef [ORD=125117] [ID=4] 

In function: internal_function_69 

Command exited with non-zero status 1


 


    If I change the method, I use " %1 = fptrunc float %0  to half ", then " %2 = bitcast half %1 to i16", I meet samiliar problem,
the log is following:


 


LLVM ERROR: Cannot select: 0x9f554b0: ch = store 0x9d0f28c, 0x9f5d900, 0x9f54ba8, 0x9f54b20<ST2[FixedStack0](align=4), trunc to f16> [ID=52]


0x9f5d900: f32,ch = load 0x9f5e290, 0x9f5dd40, 0x9f54b20<LD4[%sunkaddr69]> [ORD=1810] [ID=51]


0x9f5dd40: i32 = add 0x9f55318, 0x9f5e0f8 [ORD=1808] [ID=31] 

0x9f55318: i32,ch = CopyFromReg 0x9d0f28c, 0x9f6a3a0 [ORD=1796] [ID=26] 

0x9f6a3a0: i32 = Register %vreg32 [ORD=1796] [ID=1] 

0x9f5e0f8: i32 = Constant<64> [ORD=1808] [ID=17] 

0x9f54b20: i32 = undef [ORD=1797] [ID=6] 

0x9f54ba8: i32 = FrameIndex<0> [ID=24] 

0x9f54b20: i32 = undef [ORD=1797] [ID=6] 

In function: testVCVTT32TO16Function 


 


 


    Anyone can help me?? Thank you again.


 







yalong at multicorewareinc.com






_______________________________________________

LLVM Developers mailing list

LLVMdev at cs.uiuc.edu         
http://llvm.cs.uiuc.edu

http://lists.cs.uiuc.edu/mailman/listinfo/llvmdev







 

--


Best Regards,

 


Kevin Qin











-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.llvm.org/pipermail/llvm-dev/attachments/20140709/51fffa6a/attachment.html>