[LLVMdev] Help!!!!Help!!!! " LLVM ERROR: Cannot select: 0x9fc9680: i32 = fp32_to_fp16 0x9fc0750 [ID=16] " problem!!!!!!!!!!!!!!!!!!

[Daniel Sanders]

Hi,

NEON is an ARM feature and is therefore not supported by MIPS so I assume you are trying to achieve the same effect. As far as I know, the MIPS backend doesn't support half-precision floating point at the moment.

There is limited support for the <8 x f16> type when MSA (MIPS SIMD Architecture) is enabled but even then scalar half-precision is not currently supported.

From: llvmdev-bounces at cs.uiuc.edu [mailto:llvmdev-bounces at cs.uiuc.edu] On Behalf Of yalong at multicorewareinc.com
Sent: 09 July 2014 23:31
To: Kevin Qin
Cc: llvmdev
Subject: Re: [LLVMdev] Help!!!!Help!!!! " LLVM ERROR: Cannot select: 0x9fc9680: i32 = fp32_to_fp16 0x9fc0750 [ID=16] " problem!!!!!!!!!!!!!!!!!!

    Thank you Kevin!!!
    If I use fptrunc and bitcast realise NEON vcvtt ( I can sure, "fptrunc  double %tmp to float" is right, but "fptrunc float %tmp to half" is wrong). My target platform is MIPS.  The command as following:

NEON:
        vcvtt.f16.f32 s2, s0


llvm Code:

%Vt_2 = load float* %VFP_s0, align 4
%Vt3_1 = fptrunc float %Vt_2 to half
%Vt4_1 = bitcast half %Vt3_1 to i16
%Vt2_2 = bitcast float* %VFP_s2 to <2 x i16>*
%Vrti_1 = load <2 x i16>* %Vt2_2, align 4
%Vrti_2 = insertelement <2 x i16> %Vrti_1, i16 %Vt4_1, i32 1
%Vt2_3 = bitcast float* %VFP_s2 to <2 x i16>*
store <2 x i16> %Vrti_2, <2 x i16>* %Vt2_3, align 4


Error Log:
LLVM ERROR: Cannot select: 0x9f554b0: ch = store 0x9d0f28c, 0x9f5d900, 0x9f54ba8, 0x9f54b20<ST2[FixedStack0](align=4), trunc to f16> [ID=52]
0x9f5d900: f32,ch = load 0x9f5e290, 0x9f5dd40, 0x9f54b20<LD4[%sunkaddr69]> [ORD=1810] [ID=51]
0x9f5dd40: i32 = add 0x9f55318, 0x9f5e0f8 [ORD=1808] [ID=31]
0x9f55318: i32,ch = CopyFromReg 0x9d0f28c, 0x9f6a3a0 [ORD=1796] [ID=26]
0x9f6a3a0: i32 = Register %vreg32 [ORD=1796] [ID=1]
0x9f5e0f8: i32 = Constant<64> [ORD=1808] [ID=17]
0x9f54b20: i32 = undef [ORD=1797] [ID=6]
0x9f54ba8: i32 = FrameIndex<0> [ID=24]
0x9f54b20: i32 = undef [ORD=1797] [ID=6]
In function: testVCVTT32TO16Function


________________________________
yalong at multicorewareinc.com<mailto:yalong at multicorewareinc.com>

From: Kevin Qin<mailto:kevinqindev at gmail.com>
Date: 2014-07-09 00:03
To: yalong at multicorewareinc.com<mailto:yalong at multicorewareinc.com>
CC: llvmdev<mailto:llvmdev at cs.uiuc.edu>
Subject: Re: [LLVMdev] Help!!!!Help!!!! " LLVM ERROR: Cannot select: 0x9fc9680: i32 = fp32_to_fp16 0x9fc0750 [ID=16] " problem!!!!!!!!!!!!!!!!!!
Hi,

Can you show us the command line you are using? At least can you tell us the backend you tried on? If you can upload the test case as well, it will be very useful to find out the problem.


Regards,
Kevin

2014-07-10 1:53 GMT+08:00 yalong at multicorewareinc.com<mailto:yalong at multicorewareinc.com> <yalong at multicorewareinc.com<mailto:yalong at multicorewareinc.com>>:
Hi all,
    I am new to llvm. I need help. Thank you every!

    I want to realize vcvtt.f16.f32  NEON instruction by llvm. This instruction covert top-16bits of a single type to f16. I use the intrinsics function llvm.convert.to.fp16, but cannot llc , I meet is following problem :

LLVM ERROR: Cannot select: 0x9fc9680: i32 = fp32_to_fp16 0x9fc0750 [ID=16]
0x9fc0750: f32,ch = load 0x3aafd68, 0x9fc2a20, 0x9feaab0<LD4[%sunkaddr85033]> [ORD=125117] [ID=15]
0x9fc2a20: i32 = add 0x9fed880, 0x9fd9ea0 [ORD=125115] [ID=13]
0x9fed880: i32,ch = CopyFromReg 0x3aafd68, 0x9fbea90 [ORD=125114] [ID=9]
0x9fbea90: i32 = Register %vreg13999 [ORD=125114] [ID=1]
0x9fd9ea0: i32 = Constant<80> [ORD=125115] [ID=2]
0x9feaab0: i32 = undef [ORD=125117] [ID=4]
In function: internal_function_69
Command exited with non-zero status 1

    If I change the method, I use " %1 = fptrunc float %0  to half ", then " %2 = bitcast half %1 to i16", I meet samiliar problem, the log is following:

LLVM ERROR: Cannot select: 0x9f554b0: ch = store 0x9d0f28c, 0x9f5d900, 0x9f54ba8, 0x9f54b20<ST2[FixedStack0](align=4), trunc to f16> [ID=52]
0x9f5d900: f32,ch = load 0x9f5e290, 0x9f5dd40, 0x9f54b20<LD4[%sunkaddr69]> [ORD=1810] [ID=51]
0x9f5dd40: i32 = add 0x9f55318, 0x9f5e0f8 [ORD=1808] [ID=31]
0x9f55318: i32,ch = CopyFromReg 0x9d0f28c, 0x9f6a3a0 [ORD=1796] [ID=26]
0x9f6a3a0: i32 = Register %vreg32 [ORD=1796] [ID=1]
0x9f5e0f8: i32 = Constant<64> [ORD=1808] [ID=17]
0x9f54b20: i32 = undef [ORD=1797] [ID=6]
0x9f54ba8: i32 = FrameIndex<0> [ID=24]
0x9f54b20: i32 = undef [ORD=1797] [ID=6]
In function: testVCVTT32TO16Function


    Anyone can help me?? Thank you again.

________________________________
yalong at multicorewareinc.com<mailto:yalong at multicorewareinc.com>

_______________________________________________
LLVM Developers mailing list
LLVMdev at cs.uiuc.edu<mailto:LLVMdev at cs.uiuc.edu>         http://llvm.cs.uiuc.edu
http://lists.cs.uiuc.edu/mailman/listinfo/llvmdev



--
Best Regards,

Kevin Qin
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.llvm.org/pipermail/llvm-dev/attachments/20140709/1b53e912/attachment.html>