[llvm-commits] [SignlessTypes] CVS: llvm/lib/Bytecode/Reader/Reader.cpp
Reid Spencer
reid at x10sys.com
Wed Oct 25 18:58:33 PDT 2006
Changes in directory llvm/lib/Bytecode/Reader:
Reader.cpp updated: 1.198.2.7 -> 1.198.2.8
---
Log message:
Round 2 of DIV updates.
---
Diffs of the changes: (+348 -342)
Reader.cpp | 690 ++++++++++++++++++++++++++++++-------------------------------
1 files changed, 348 insertions(+), 342 deletions(-)
Index: llvm/lib/Bytecode/Reader/Reader.cpp
diff -u llvm/lib/Bytecode/Reader/Reader.cpp:1.198.2.7 llvm/lib/Bytecode/Reader/Reader.cpp:1.198.2.8
--- llvm/lib/Bytecode/Reader/Reader.cpp:1.198.2.7 Mon Oct 23 13:13:26 2006
+++ llvm/lib/Bytecode/Reader/Reader.cpp Wed Oct 25 20:58:05 2006
@@ -562,10 +562,17 @@
insertValue(AI, getTypeSlot(AI->getType()), FunctionValues);
}
-/// Convert previous opcode values into the current value and/or construct
-/// the instruction. This function handles all *abnormal* cases for instruction
-/// generation based on obsolete opcode values. The normal cases are handled
-/// in ParseInstruction below.
+// Convert previous opcode values into the current value and/or construct
+// the instruction. This function handles all *abnormal* cases for instruction
+// generation based on obsolete opcode values. The normal cases are handled
+// in ParseInstruction below. Generally this function just produces a new
+// Opcode value (first argument). In a few cases (VAArg, VANext) the upgrade
+// path requies that the instruction (sequence) be generated differently from
+// the normal case in order to preserve the original semantics. In these
+// cases the result of the function will be a non-zero Instruction pointer. In
+// all other cases, zero will be returned indicating that the *normal*
+// instruction generation should be used, but with the new Opcode value.
+//
Instruction*
BytecodeReader::handleObsoleteOpcodes(
unsigned &Opcode, ///< The old opcode, possibly updated by this function
@@ -575,11 +582,21 @@
BasicBlock* BB ///< The basic block to insert into, if we need to
) {
- // Declare the resulting instruction we might build.
+ // First, short circuit this if no conversion is required. When signless
+ // instructions were implemented the entire opcode sequence was revised so
+ // we key on this first which means that the opcode value read is the one
+ // we should use.
+ if (!hasSignlessInstructions)
+ return 0; // The opcode is fine the way it is.
+
+ // Declare the resulting instruction we might build. In general we just
+ // change the Opcode argument but in a few cases we need to generate the
+ // Instruction here because the upgrade case is significantly different from
+ // the normal case.
Instruction *Result = 0;
// If this is a bytecode format that did not include the unreachable
- // instruction, bump up the opcode number to adjust
+ // instruction, bump up the opcode number to adjust it.
if (hasNoUnreachableInst) {
if (Opcode >= Instruction::Unreachable &&
Opcode < 62) { // 62
@@ -587,20 +604,15 @@
}
}
- // First, short circuit this if no conversion is required. When signless
- // instructions were implemented the entire opcode sequence was revised so
- // we key on this first which means that the opcode value read is the one
- // we should use.
- if (!hasSignlessInstructions)
- return Result;
-
// We're dealing with an upgrade situation. For each of the opcode values,
// perform the necessary conversion.
switch (Opcode) {
- default: // Pass Through
- // If we don't match any of the cases here then the opcode is fine the
- // way it is. That will happen for the opcodes > 53 which are the
- // volatile load/store, and call/invoke with calling conventions.
+ default: // Error
+ // This switch statement provides cases for all known opcodes prior to
+ // version 6 bytecode format. We know we're in an upgrade situation so
+ // if there isn't a match in this switch, then something is horribly
+ // wrong.
+ error("Unknown obsolete opcode encountered.");
break;
case 1: // Ret
Opcode = Instruction::Ret;
@@ -886,12 +898,12 @@
handleObsoleteOpcodes(Opcode, Oprnds, iType, InstTy, BB);
// We have enough info to inform the handler now.
- if (Handler) Handler->handleInstruction(Opcode, InstTy, Oprnds, At-SaveAt);
+ if (Handler)
+ Handler->handleInstruction(Opcode, InstTy, Oprnds, At-SaveAt);
// If the backwards compatibility code didn't produce an instruction then
// we do the *normal* thing ..
if (!Result) {
-
// First, handle the easy binary operators case
if (Opcode >= Instruction::BinaryOpsBegin &&
Opcode < Instruction::BinaryOpsEnd && Oprnds.size() == 2)
@@ -900,361 +912,355 @@
getValue(iType, Oprnds[1]));
// Indicate that we don't think this is a call instruction (yet).
- bool isCall = false;
-
// Process based on the Opcode read
switch (Opcode) {
- default: // There was an error, this shouldn't happen.
- if (Result == 0)
- error("Illegal instruction read!");
- break;
- case Instruction::VAArg:
- if (Oprnds.size() != 2)
- error("Invalid VAArg instruction!");
- Result = new VAArgInst(getValue(iType, Oprnds[0]),
- getSanitizedType(Oprnds[1]));
- break;
- case Instruction::ExtractElement: {
- if (Oprnds.size() != 2)
- error("Invalid extractelement instruction!");
- Value *V1 = getValue(iType, Oprnds[0]);
- Value *V2 = getValue(Type::UIntTyID, Oprnds[1]);
-
- if (!ExtractElementInst::isValidOperands(V1, V2))
- error("Invalid extractelement instruction!");
+ default: // There was an error, this shouldn't happen.
+ if (Result == 0)
+ error("Illegal instruction read!");
+ break;
+ case Instruction::VAArg:
+ if (Oprnds.size() != 2)
+ error("Invalid VAArg instruction!");
+ Result = new VAArgInst(getValue(iType, Oprnds[0]),
+ getSanitizedType(Oprnds[1]));
+ break;
+ case Instruction::ExtractElement: {
+ if (Oprnds.size() != 2)
+ error("Invalid extractelement instruction!");
+ Value *V1 = getValue(iType, Oprnds[0]);
+ Value *V2 = getValue(Type::UIntTyID, Oprnds[1]);
+
+ if (!ExtractElementInst::isValidOperands(V1, V2))
+ error("Invalid extractelement instruction!");
- Result = new ExtractElementInst(V1, V2);
- break;
- }
- case Instruction::InsertElement: {
- const PackedType *PackedTy = dyn_cast<PackedType>(InstTy);
- if (!PackedTy || Oprnds.size() != 3)
- error("Invalid insertelement instruction!");
+ Result = new ExtractElementInst(V1, V2);
+ break;
+ }
+ case Instruction::InsertElement: {
+ const PackedType *PackedTy = dyn_cast<PackedType>(InstTy);
+ if (!PackedTy || Oprnds.size() != 3)
+ error("Invalid insertelement instruction!");
+
+ Value *V1 = getValue(iType, Oprnds[0]);
+ Value *V2 = getValue(getTypeSlot(PackedTy->getElementType()),Oprnds[1]);
+ Value *V3 = getValue(Type::UIntTyID, Oprnds[2]);
- Value *V1 = getValue(iType, Oprnds[0]);
- Value *V2 = getValue(getTypeSlot(PackedTy->getElementType()),Oprnds[1]);
- Value *V3 = getValue(Type::UIntTyID, Oprnds[2]);
-
- if (!InsertElementInst::isValidOperands(V1, V2, V3))
- error("Invalid insertelement instruction!");
- Result = new InsertElementInst(V1, V2, V3);
- break;
- }
- case Instruction::ShuffleVector: {
- const PackedType *PackedTy = dyn_cast<PackedType>(InstTy);
- if (!PackedTy || Oprnds.size() != 3)
- error("Invalid shufflevector instruction!");
- Value *V1 = getValue(iType, Oprnds[0]);
- Value *V2 = getValue(iType, Oprnds[1]);
- const PackedType *EltTy =
- PackedType::get(Type::UIntTy, PackedTy->getNumElements());
- Value *V3 = getValue(getTypeSlot(EltTy), Oprnds[2]);
- if (!ShuffleVectorInst::isValidOperands(V1, V2, V3))
- error("Invalid shufflevector instruction!");
- Result = new ShuffleVectorInst(V1, V2, V3);
- break;
- }
- case Instruction::Cast:
- if (Oprnds.size() != 2)
- error("Invalid Cast instruction!");
- Result = new CastInst(getValue(iType, Oprnds[0]),
- getSanitizedType(Oprnds[1]));
- break;
- case Instruction::Select:
- if (Oprnds.size() != 3)
- error("Invalid Select instruction!");
- Result = new SelectInst(getValue(Type::BoolTyID, Oprnds[0]),
- getValue(iType, Oprnds[1]),
- getValue(iType, Oprnds[2]));
- break;
- case Instruction::PHI: {
- if (Oprnds.size() == 0 || (Oprnds.size() & 1))
- error("Invalid phi node encountered!");
-
- PHINode *PN = new PHINode(InstTy);
- PN->reserveOperandSpace(Oprnds.size());
- for (unsigned i = 0, e = Oprnds.size(); i != e; i += 2)
- PN->addIncoming(
- getValue(iType, Oprnds[i]), getBasicBlock(Oprnds[i+1]));
- Result = PN;
- break;
- }
+ if (!InsertElementInst::isValidOperands(V1, V2, V3))
+ error("Invalid insertelement instruction!");
+ Result = new InsertElementInst(V1, V2, V3);
+ break;
+ }
+ case Instruction::ShuffleVector: {
+ const PackedType *PackedTy = dyn_cast<PackedType>(InstTy);
+ if (!PackedTy || Oprnds.size() != 3)
+ error("Invalid shufflevector instruction!");
+ Value *V1 = getValue(iType, Oprnds[0]);
+ Value *V2 = getValue(iType, Oprnds[1]);
+ const PackedType *EltTy =
+ PackedType::get(Type::UIntTy, PackedTy->getNumElements());
+ Value *V3 = getValue(getTypeSlot(EltTy), Oprnds[2]);
+ if (!ShuffleVectorInst::isValidOperands(V1, V2, V3))
+ error("Invalid shufflevector instruction!");
+ Result = new ShuffleVectorInst(V1, V2, V3);
+ break;
+ }
+ case Instruction::Cast:
+ if (Oprnds.size() != 2)
+ error("Invalid Cast instruction!");
+ Result = new CastInst(getValue(iType, Oprnds[0]),
+ getSanitizedType(Oprnds[1]));
+ break;
+ case Instruction::Select:
+ if (Oprnds.size() != 3)
+ error("Invalid Select instruction!");
+ Result = new SelectInst(getValue(Type::BoolTyID, Oprnds[0]),
+ getValue(iType, Oprnds[1]),
+ getValue(iType, Oprnds[2]));
+ break;
+ case Instruction::PHI: {
+ if (Oprnds.size() == 0 || (Oprnds.size() & 1))
+ error("Invalid phi node encountered!");
+
+ PHINode *PN = new PHINode(InstTy);
+ PN->reserveOperandSpace(Oprnds.size());
+ for (unsigned i = 0, e = Oprnds.size(); i != e; i += 2)
+ PN->addIncoming(
+ getValue(iType, Oprnds[i]), getBasicBlock(Oprnds[i+1]));
+ Result = PN;
+ break;
+ }
- case Instruction::Shl:
- case Instruction::Shr:
- Result = new ShiftInst(Instruction::OtherOps(Opcode),
- getValue(iType, Oprnds[0]),
- getValue(Type::UByteTyID, Oprnds[1]));
- break;
- case Instruction::Ret:
- if (Oprnds.size() == 0)
- Result = new ReturnInst();
- else if (Oprnds.size() == 1)
- Result = new ReturnInst(getValue(iType, Oprnds[0]));
- else
- error("Unrecognized instruction!");
- break;
-
- case Instruction::Br:
- if (Oprnds.size() == 1)
- Result = new BranchInst(getBasicBlock(Oprnds[0]));
- else if (Oprnds.size() == 3)
- Result = new BranchInst(getBasicBlock(Oprnds[0]),
- getBasicBlock(Oprnds[1]), getValue(Type::BoolTyID , Oprnds[2]));
- else
- error("Invalid number of operands for a 'br' instruction!");
- break;
- case Instruction::Switch: {
- if (Oprnds.size() & 1)
- error("Switch statement with odd number of arguments!");
-
- SwitchInst *I = new SwitchInst(getValue(iType, Oprnds[0]),
- getBasicBlock(Oprnds[1]),
- Oprnds.size()/2-1);
- for (unsigned i = 2, e = Oprnds.size(); i != e; i += 2)
- I->addCase(cast<ConstantInt>(getValue(iType, Oprnds[i])),
- getBasicBlock(Oprnds[i+1]));
- Result = I;
- break;
- }
+ case Instruction::Shl:
+ case Instruction::Shr:
+ Result = new ShiftInst(Instruction::OtherOps(Opcode),
+ getValue(iType, Oprnds[0]),
+ getValue(Type::UByteTyID, Oprnds[1]));
+ break;
+ case Instruction::Ret:
+ if (Oprnds.size() == 0)
+ Result = new ReturnInst();
+ else if (Oprnds.size() == 1)
+ Result = new ReturnInst(getValue(iType, Oprnds[0]));
+ else
+ error("Unrecognized instruction!");
+ break;
- case 58: // Call with extra operand for calling conv
- case 59: // tail call, Fast CC
- case 60: // normal call, Fast CC
- case 61: // tail call, C Calling Conv
- case Instruction::Call: { // Normal Call, C Calling Convention
- if (Oprnds.size() == 0)
- error("Invalid call instruction encountered!");
+ case Instruction::Br:
+ if (Oprnds.size() == 1)
+ Result = new BranchInst(getBasicBlock(Oprnds[0]));
+ else if (Oprnds.size() == 3)
+ Result = new BranchInst(getBasicBlock(Oprnds[0]),
+ getBasicBlock(Oprnds[1]), getValue(Type::BoolTyID , Oprnds[2]));
+ else
+ error("Invalid number of operands for a 'br' instruction!");
+ break;
+ case Instruction::Switch: {
+ if (Oprnds.size() & 1)
+ error("Switch statement with odd number of arguments!");
+
+ SwitchInst *I = new SwitchInst(getValue(iType, Oprnds[0]),
+ getBasicBlock(Oprnds[1]),
+ Oprnds.size()/2-1);
+ for (unsigned i = 2, e = Oprnds.size(); i != e; i += 2)
+ I->addCase(cast<ConstantInt>(getValue(iType, Oprnds[i])),
+ getBasicBlock(Oprnds[i+1]));
+ Result = I;
+ break;
+ }
+ case 58: // Call with extra operand for calling conv
+ case 59: // tail call, Fast CC
+ case 60: // normal call, Fast CC
+ case 61: // tail call, C Calling Conv
+ case Instruction::Call: { // Normal Call, C Calling Convention
+ if (Oprnds.size() == 0)
+ error("Invalid call instruction encountered!");
- Value *F = getValue(iType, Oprnds[0]);
+ Value *F = getValue(iType, Oprnds[0]);
- unsigned CallingConv = CallingConv::C;
- bool isTailCall = false;
+ unsigned CallingConv = CallingConv::C;
+ bool isTailCall = false;
- if (Opcode == 61 || Opcode == 59)
- isTailCall = true;
-
- if (Opcode == 58) {
- isTailCall = Oprnds.back() & 1;
- CallingConv = Oprnds.back() >> 1;
- Oprnds.pop_back();
- } else if (Opcode == 59 || Opcode == 60) {
- CallingConv = CallingConv::Fast;
- }
-
- // Check to make sure we have a pointer to function type
- const PointerType *PTy = dyn_cast<PointerType>(F->getType());
- if (PTy == 0) error("Call to non function pointer value!");
- const FunctionType *FTy = dyn_cast<FunctionType>(PTy->getElementType());
- if (FTy == 0) error("Call to non function pointer value!");
-
- std::vector<Value *> Params;
- if (!FTy->isVarArg()) {
- FunctionType::param_iterator It = FTy->param_begin();
-
- for (unsigned i = 1, e = Oprnds.size(); i != e; ++i) {
- if (It == FTy->param_end())
- error("Invalid call instruction!");
- Params.push_back(getValue(getTypeSlot(*It++), Oprnds[i]));
- }
- if (It != FTy->param_end())
- error("Invalid call instruction!");
- } else {
- Oprnds.erase(Oprnds.begin(), Oprnds.begin()+1);
+ if (Opcode == 61 || Opcode == 59)
+ isTailCall = true;
+
+ if (Opcode == 58) {
+ isTailCall = Oprnds.back() & 1;
+ CallingConv = Oprnds.back() >> 1;
+ Oprnds.pop_back();
+ } else if (Opcode == 59 || Opcode == 60) {
+ CallingConv = CallingConv::Fast;
+ }
+
+ // Check to make sure we have a pointer to function type
+ const PointerType *PTy = dyn_cast<PointerType>(F->getType());
+ if (PTy == 0) error("Call to non function pointer value!");
+ const FunctionType *FTy = dyn_cast<FunctionType>(PTy->getElementType());
+ if (FTy == 0) error("Call to non function pointer value!");
+
+ std::vector<Value *> Params;
+ if (!FTy->isVarArg()) {
+ FunctionType::param_iterator It = FTy->param_begin();
- unsigned FirstVariableOperand;
- if (Oprnds.size() < FTy->getNumParams())
- error("Call instruction missing operands!");
+ for (unsigned i = 1, e = Oprnds.size(); i != e; ++i) {
+ if (It == FTy->param_end())
+ error("Invalid call instruction!");
+ Params.push_back(getValue(getTypeSlot(*It++), Oprnds[i]));
+ }
+ if (It != FTy->param_end())
+ error("Invalid call instruction!");
+ } else {
+ Oprnds.erase(Oprnds.begin(), Oprnds.begin()+1);
- // Read all of the fixed arguments
- for (unsigned i = 0, e = FTy->getNumParams(); i != e; ++i)
- Params.push_back(
- getValue(getTypeSlot(FTy->getParamType(i)),Oprnds[i]));
+ unsigned FirstVariableOperand;
+ if (Oprnds.size() < FTy->getNumParams())
+ error("Call instruction missing operands!");
- FirstVariableOperand = FTy->getNumParams();
+ // Read all of the fixed arguments
+ for (unsigned i = 0, e = FTy->getNumParams(); i != e; ++i)
+ Params.push_back(
+ getValue(getTypeSlot(FTy->getParamType(i)),Oprnds[i]));
- if ((Oprnds.size()-FirstVariableOperand) & 1)
- error("Invalid call instruction!"); // Must be pairs of type/value
+ FirstVariableOperand = FTy->getNumParams();
- for (unsigned i = FirstVariableOperand, e = Oprnds.size();
- i != e; i += 2)
- Params.push_back(getValue(Oprnds[i], Oprnds[i+1]));
- }
+ if ((Oprnds.size()-FirstVariableOperand) & 1)
+ error("Invalid call instruction!"); // Must be pairs of type/value
- Result = new CallInst(F, Params);
- if (isTailCall) cast<CallInst>(Result)->setTailCall();
- if (CallingConv) cast<CallInst>(Result)->setCallingConv(CallingConv);
- break;
+ for (unsigned i = FirstVariableOperand, e = Oprnds.size();
+ i != e; i += 2)
+ Params.push_back(getValue(Oprnds[i], Oprnds[i+1]));
}
- case 56: // Invoke with encoded CC
- case 57: // Invoke Fast CC
- case Instruction::Invoke: { // Invoke C CC
- if (Oprnds.size() < 3)
- error("Invalid invoke instruction!");
- Value *F = getValue(iType, Oprnds[0]);
- // Check to make sure we have a pointer to function type
- const PointerType *PTy = dyn_cast<PointerType>(F->getType());
- if (PTy == 0)
- error("Invoke to non function pointer value!");
- const FunctionType *FTy = dyn_cast<FunctionType>(PTy->getElementType());
- if (FTy == 0)
- error("Invoke to non function pointer value!");
-
- std::vector<Value *> Params;
- BasicBlock *Normal, *Except;
- unsigned CallingConv = CallingConv::C;
-
- if (Opcode == 57)
- CallingConv = CallingConv::Fast;
- else if (Opcode == 56) {
- CallingConv = Oprnds.back();
- Oprnds.pop_back();
- }
+ Result = new CallInst(F, Params);
+ if (isTailCall) cast<CallInst>(Result)->setTailCall();
+ if (CallingConv) cast<CallInst>(Result)->setCallingConv(CallingConv);
+ break;
+ }
+ case 56: // Invoke with encoded CC
+ case 57: // Invoke Fast CC
+ case Instruction::Invoke: { // Invoke C CC
+ if (Oprnds.size() < 3)
+ error("Invalid invoke instruction!");
+ Value *F = getValue(iType, Oprnds[0]);
+
+ // Check to make sure we have a pointer to function type
+ const PointerType *PTy = dyn_cast<PointerType>(F->getType());
+ if (PTy == 0)
+ error("Invoke to non function pointer value!");
+ const FunctionType *FTy = dyn_cast<FunctionType>(PTy->getElementType());
+ if (FTy == 0)
+ error("Invoke to non function pointer value!");
+
+ std::vector<Value *> Params;
+ BasicBlock *Normal, *Except;
+ unsigned CallingConv = CallingConv::C;
+
+ if (Opcode == 57)
+ CallingConv = CallingConv::Fast;
+ else if (Opcode == 56) {
+ CallingConv = Oprnds.back();
+ Oprnds.pop_back();
+ }
- if (!FTy->isVarArg()) {
- Normal = getBasicBlock(Oprnds[1]);
- Except = getBasicBlock(Oprnds[2]);
-
- FunctionType::param_iterator It = FTy->param_begin();
- for (unsigned i = 3, e = Oprnds.size(); i != e; ++i) {
- if (It == FTy->param_end())
- error("Invalid invoke instruction!");
- Params.push_back(getValue(getTypeSlot(*It++), Oprnds[i]));
- }
- if (It != FTy->param_end())
+ if (!FTy->isVarArg()) {
+ Normal = getBasicBlock(Oprnds[1]);
+ Except = getBasicBlock(Oprnds[2]);
+
+ FunctionType::param_iterator It = FTy->param_begin();
+ for (unsigned i = 3, e = Oprnds.size(); i != e; ++i) {
+ if (It == FTy->param_end())
error("Invalid invoke instruction!");
- } else {
- Oprnds.erase(Oprnds.begin(), Oprnds.begin()+1);
-
- Normal = getBasicBlock(Oprnds[0]);
- Except = getBasicBlock(Oprnds[1]);
+ Params.push_back(getValue(getTypeSlot(*It++), Oprnds[i]));
+ }
+ if (It != FTy->param_end())
+ error("Invalid invoke instruction!");
+ } else {
+ Oprnds.erase(Oprnds.begin(), Oprnds.begin()+1);
- unsigned FirstVariableArgument = FTy->getNumParams()+2;
- for (unsigned i = 2; i != FirstVariableArgument; ++i)
- Params.push_back(getValue(getTypeSlot(FTy->getParamType(i-2)),
- Oprnds[i]));
+ Normal = getBasicBlock(Oprnds[0]);
+ Except = getBasicBlock(Oprnds[1]);
- // Must be type/value pairs. If not, error out.
- if (Oprnds.size()-FirstVariableArgument & 1)
- error("Invalid invoke instruction!");
+ unsigned FirstVariableArgument = FTy->getNumParams()+2;
+ for (unsigned i = 2; i != FirstVariableArgument; ++i)
+ Params.push_back(getValue(getTypeSlot(FTy->getParamType(i-2)),
+ Oprnds[i]));
- for (unsigned i = FirstVariableArgument; i < Oprnds.size(); i += 2)
- Params.push_back(getValue(Oprnds[i], Oprnds[i+1]));
- }
+ // Must be type/value pairs. If not, error out.
+ if (Oprnds.size()-FirstVariableArgument & 1)
+ error("Invalid invoke instruction!");
- Result = new InvokeInst(F, Normal, Except, Params);
- if (CallingConv) cast<InvokeInst>(Result)->setCallingConv(CallingConv);
- break;
- }
- case Instruction::Malloc: {
- unsigned Align = 0;
- if (Oprnds.size() == 2)
- Align = (1 << Oprnds[1]) >> 1;
- else if (Oprnds.size() > 2)
- error("Invalid malloc instruction!");
- if (!isa<PointerType>(InstTy))
- error("Invalid malloc instruction!");
-
- Result = new MallocInst(cast<PointerType>(InstTy)->getElementType(),
- getValue(Type::UIntTyID, Oprnds[0]), Align);
- break;
+ for (unsigned i = FirstVariableArgument; i < Oprnds.size(); i += 2)
+ Params.push_back(getValue(Oprnds[i], Oprnds[i+1]));
}
- case Instruction::Alloca: {
- unsigned Align = 0;
- if (Oprnds.size() == 2)
- Align = (1 << Oprnds[1]) >> 1;
- else if (Oprnds.size() > 2)
- error("Invalid alloca instruction!");
- if (!isa<PointerType>(InstTy))
- error("Invalid alloca instruction!");
-
- Result = new AllocaInst(cast<PointerType>(InstTy)->getElementType(),
- getValue(Type::UIntTyID, Oprnds[0]), Align);
- break;
- }
- case Instruction::Free:
- if (!isa<PointerType>(InstTy))
- error("Invalid free instruction!");
- Result = new FreeInst(getValue(iType, Oprnds[0]));
- break;
- case Instruction::GetElementPtr: {
- if (Oprnds.size() == 0 || !isa<PointerType>(InstTy))
+ Result = new InvokeInst(F, Normal, Except, Params);
+ if (CallingConv) cast<InvokeInst>(Result)->setCallingConv(CallingConv);
+ break;
+ }
+ case Instruction::Malloc: {
+ unsigned Align = 0;
+ if (Oprnds.size() == 2)
+ Align = (1 << Oprnds[1]) >> 1;
+ else if (Oprnds.size() > 2)
+ error("Invalid malloc instruction!");
+ if (!isa<PointerType>(InstTy))
+ error("Invalid malloc instruction!");
+
+ Result = new MallocInst(cast<PointerType>(InstTy)->getElementType(),
+ getValue(Type::UIntTyID, Oprnds[0]), Align);
+ break;
+ }
+ case Instruction::Alloca: {
+ unsigned Align = 0;
+ if (Oprnds.size() == 2)
+ Align = (1 << Oprnds[1]) >> 1;
+ else if (Oprnds.size() > 2)
+ error("Invalid alloca instruction!");
+ if (!isa<PointerType>(InstTy))
+ error("Invalid alloca instruction!");
+
+ Result = new AllocaInst(cast<PointerType>(InstTy)->getElementType(),
+ getValue(Type::UIntTyID, Oprnds[0]), Align);
+ break;
+ }
+ case Instruction::Free:
+ if (!isa<PointerType>(InstTy))
+ error("Invalid free instruction!");
+ Result = new FreeInst(getValue(iType, Oprnds[0]));
+ break;
+ case Instruction::GetElementPtr: {
+ if (Oprnds.size() == 0 || !isa<PointerType>(InstTy))
+ error("Invalid getelementptr instruction!");
+
+ std::vector<Value*> Idx;
+
+ const Type *NextTy = InstTy;
+ for (unsigned i = 1, e = Oprnds.size(); i != e; ++i) {
+ const CompositeType *TopTy = dyn_cast_or_null<CompositeType>(NextTy);
+ if (!TopTy)
error("Invalid getelementptr instruction!");
- std::vector<Value*> Idx;
-
- const Type *NextTy = InstTy;
- for (unsigned i = 1, e = Oprnds.size(); i != e; ++i) {
- const CompositeType *TopTy = dyn_cast_or_null<CompositeType>(NextTy);
- if (!TopTy)
- error("Invalid getelementptr instruction!");
-
- unsigned ValIdx = Oprnds[i];
- unsigned IdxTy = 0;
- if (!hasRestrictedGEPTypes) {
- // Struct indices are always uints, sequential type indices can be
- // any of the 32 or 64-bit integer types. The actual choice of
- // type is encoded in the low two bits of the slot number.
- if (isa<StructType>(TopTy))
- IdxTy = Type::UIntTyID;
- else {
- switch (ValIdx & 3) {
- default:
- case 0: IdxTy = Type::UIntTyID; break;
- case 1: IdxTy = Type::IntTyID; break;
- case 2: IdxTy = Type::ULongTyID; break;
- case 3: IdxTy = Type::LongTyID; break;
- }
- ValIdx >>= 2;
+ unsigned ValIdx = Oprnds[i];
+ unsigned IdxTy = 0;
+ if (!hasRestrictedGEPTypes) {
+ // Struct indices are always uints, sequential type indices can be
+ // any of the 32 or 64-bit integer types. The actual choice of
+ // type is encoded in the low two bits of the slot number.
+ if (isa<StructType>(TopTy))
+ IdxTy = Type::UIntTyID;
+ else {
+ switch (ValIdx & 3) {
+ default:
+ case 0: IdxTy = Type::UIntTyID; break;
+ case 1: IdxTy = Type::IntTyID; break;
+ case 2: IdxTy = Type::ULongTyID; break;
+ case 3: IdxTy = Type::LongTyID; break;
}
- } else {
- IdxTy = isa<StructType>(TopTy) ? Type::UByteTyID : Type::LongTyID;
+ ValIdx >>= 2;
}
+ } else {
+ IdxTy = isa<StructType>(TopTy) ? Type::UByteTyID : Type::LongTyID;
+ }
- Idx.push_back(getValue(IdxTy, ValIdx));
-
- // Convert ubyte struct indices into uint struct indices.
- if (isa<StructType>(TopTy) && hasRestrictedGEPTypes)
- if (ConstantInt *C = dyn_cast<ConstantInt>(Idx.back()))
- if (C->getType() == Type::UByteTy)
- Idx[Idx.size()-1] = ConstantExpr::getCast(C, Type::UIntTy);
+ Idx.push_back(getValue(IdxTy, ValIdx));
- NextTy = GetElementPtrInst::getIndexedType(InstTy, Idx, true);
- }
+ // Convert ubyte struct indices into uint struct indices.
+ if (isa<StructType>(TopTy) && hasRestrictedGEPTypes)
+ if (ConstantInt *C = dyn_cast<ConstantInt>(Idx.back()))
+ if (C->getType() == Type::UByteTy)
+ Idx[Idx.size()-1] = ConstantExpr::getCast(C, Type::UIntTy);
- Result = new GetElementPtrInst(getValue(iType, Oprnds[0]), Idx);
- break;
+ NextTy = GetElementPtrInst::getIndexedType(InstTy, Idx, true);
}
- case 62: // volatile load
- case Instruction::Load:
- if (Oprnds.size() != 1 || !isa<PointerType>(InstTy))
- error("Invalid load instruction!");
- Result = new LoadInst(getValue(iType, Oprnds[0]), "", Opcode == 62);
- break;
-
- case 63: // volatile store
- case Instruction::Store: {
- if (!isa<PointerType>(InstTy) || Oprnds.size() != 2)
- error("Invalid store instruction!");
-
- Value *Ptr = getValue(iType, Oprnds[1]);
- const Type *ValTy = cast<PointerType>(Ptr->getType())->getElementType();
- Result = new StoreInst(getValue(getTypeSlot(ValTy), Oprnds[0]), Ptr,
- Opcode == 63);
- break;
- }
- case Instruction::Unwind:
- if (Oprnds.size() != 0) error("Invalid unwind instruction!");
- Result = new UnwindInst();
- break;
- case Instruction::Unreachable:
- if (Oprnds.size() != 0) error("Invalid unreachable instruction!");
- Result = new UnreachableInst();
- break;
- } // end switch(Opcode)
+ Result = new GetElementPtrInst(getValue(iType, Oprnds[0]), Idx);
+ break;
+ }
+ case 62: // volatile load
+ case Instruction::Load:
+ if (Oprnds.size() != 1 || !isa<PointerType>(InstTy))
+ error("Invalid load instruction!");
+ Result = new LoadInst(getValue(iType, Oprnds[0]), "", Opcode == 62);
+ break;
+ case 63: // volatile store
+ case Instruction::Store: {
+ if (!isa<PointerType>(InstTy) || Oprnds.size() != 2)
+ error("Invalid store instruction!");
+
+ Value *Ptr = getValue(iType, Oprnds[1]);
+ const Type *ValTy = cast<PointerType>(Ptr->getType())->getElementType();
+ Result = new StoreInst(getValue(getTypeSlot(ValTy), Oprnds[0]), Ptr,
+ Opcode == 63);
+ break;
+ }
+ case Instruction::Unwind:
+ if (Oprnds.size() != 0) error("Invalid unwind instruction!");
+ Result = new UnwindInst();
+ break;
+ case Instruction::Unreachable:
+ if (Oprnds.size() != 0) error("Invalid unreachable instruction!");
+ Result = new UnreachableInst();
+ break;
+ } // end switch(Opcode)
} // end if *normal*
BB->getInstList().push_back(Result);
@@ -1622,7 +1628,7 @@
}
}
-// Upgrade obsolte constant expression opcodes (ver. 5 and prior) to the new
+// Upgrade obsolete constant expression opcodes (ver. 5 and prior) to the new
// values used after ver 6. bytecode format. The operands are provided to the
// function so that decisions based on the operand type can be made when
// auto-upgrading obsolete opcodes to the new ones.
@@ -2652,7 +2658,7 @@
// FALL THROUGH
- case 6: // SignlessTypes Implementation (1.10 release)
+ case 6: // SignlessTypes Implementation (1.9 release)
break;
default:
More information about the llvm-commits
mailing list