[clang] 530ea28 - Correct a lot of diagnostic wordings for the driver
Aaron Ballman via cfe-commits
cfe-commits at lists.llvm.org
Thu Aug 5 04:05:04 PDT 2021
Author: Aaron Ballman
Date: 2021-08-05T07:04:55-04:00
New Revision: 530ea28fefc4652823a187a149e8001cbf4af18f
URL: https://github.com/llvm/llvm-project/commit/530ea28fefc4652823a187a149e8001cbf4af18f
DIFF: https://github.com/llvm/llvm-project/commit/530ea28fefc4652823a187a149e8001cbf4af18f.diff
LOG: Correct a lot of diagnostic wordings for the driver
Clang diagnostics should not start with a capital letter or use
trailing punctuation (https://clang.llvm.org/docs/InternalsManual.html#the-format-string),
but quite a few driver diagnostics were not following this advice. This
corrects the grammar and punctuation to improve consistency, but does
not change the circumstances under which the diagnostics are produced.
Added:
Modified:
clang/include/clang/Basic/DiagnosticDriverKinds.td
clang/lib/Driver/ToolChains/Cuda.cpp
clang/test/Driver/aarch64-outliner.c
clang/test/Driver/aix-object-mode.c
clang/test/Driver/amdgpu-invalid-target-id.s
clang/test/Driver/amdgpu-openmp-system-arch-fail.c
clang/test/Driver/arm-thumb-only-cores.c
clang/test/Driver/cl-inputs.c
clang/test/Driver/cl-options.c
clang/test/Driver/clang_f_opts.c
clang/test/Driver/cuda-bad-arch.cu
clang/test/Driver/cuda-detect.cu
clang/test/Driver/cuda-omp-unsupported-debug-options.cu
clang/test/Driver/cuda-options-freebsd.cu
clang/test/Driver/cuda-options.cu
clang/test/Driver/cuda-version-check.cu
clang/test/Driver/defsym.s
clang/test/Driver/fuse-ld.c
clang/test/Driver/hip-inputs.hip
clang/test/Driver/hip-invalid-target-id.hip
clang/test/Driver/invalid-target-id.cl
clang/test/Driver/msp430-hwmult.c
clang/test/Driver/openmp-offload-gpu.c
clang/test/Driver/openmp-offload.c
clang/test/Driver/rocm-detect.cl
clang/test/Driver/rocm-detect.hip
clang/test/Driver/rocm-not-found.cl
clang/test/Frontend/invalid-cxx-abi.cpp
clang/test/Frontend/round-trip-cc1-args.c
clang/test/OpenMP/target_messages.cpp
Removed:
################################################################################
diff --git a/clang/include/clang/Basic/DiagnosticDriverKinds.td b/clang/include/clang/Basic/DiagnosticDriverKinds.td
index d27b83ecbe774..78d7ba6b63836 100644
--- a/clang/include/clang/Basic/DiagnosticDriverKinds.td
+++ b/clang/include/clang/Basic/DiagnosticDriverKinds.td
@@ -52,38 +52,46 @@ def warn_drv_avr_stdlib_not_linked: Warning<
"standard library not linked and so no interrupt vector table or "
"compiler runtime routines will be linked">,
InGroup<AVRRtlibLinkingQuirks>;
-def err_drv_cuda_bad_gpu_arch : Error<"Unsupported CUDA gpu architecture: %0">;
+def err_drv_cuda_bad_gpu_arch : Error<"unsupported CUDA gpu architecture: %0">;
def err_drv_no_cuda_installation : Error<
- "cannot find CUDA installation. Provide its path via --cuda-path, or pass "
- "-nocudainc to build without CUDA includes.">;
+ "cannot find CUDA installation; provide its path via '--cuda-path', or pass "
+ "'-nocudainc' to build without CUDA includes">;
def err_drv_no_cuda_libdevice : Error<
- "cannot find libdevice for %0. Provide path to
diff erent CUDA installation "
- "via --cuda-path, or pass -nocudalib to build without linking with libdevice.">;
+ "cannot find libdevice for %0; provide path to
diff erent CUDA installation "
+ "via '--cuda-path', or pass '-nocudalib' to build without linking with "
+ "libdevice">;
def err_drv_no_rocm_device_lib : Error<
- "cannot find ROCm device library%select{| for %1}0. Provide its path via --rocm-path or "
- "--rocm-device-lib-path, or pass -nogpulib to build without ROCm device library.">;
+ "cannot find ROCm device library%select{| for %1}0; provide its path via "
+ "'--rocm-path' or '--rocm-device-lib-path', or pass '-nogpulib' to build "
+ "without ROCm device library">;
def err_drv_no_hip_runtime : Error<
- "cannot find HIP runtime. Provide its path via --rocm-path, or pass "
- "-nogpuinc to build without HIP runtime.">;
+ "cannot find HIP runtime; provide its path via '--rocm-path', or pass "
+ "'-nogpuinc' to build without HIP runtime">;
def err_drv_undetermined_amdgpu_arch : Error<
- "Cannot determine AMDGPU architecture: %0. Consider passing it via --march.">;
+ "cannot determine AMDGPU architecture: %0; consider passing it via "
+ "'--march'">;
def err_drv_cuda_version_unsupported : Error<
"GPU arch %0 is supported by CUDA versions between %1 and %2 (inclusive), "
- "but installation at %3 is %4. Use --cuda-path to specify a
diff erent CUDA "
- "install, pass a
diff erent GPU arch with --cuda-gpu-arch, or pass "
- "--no-cuda-version-check.">;
+ "but installation at %3 is %4; use '--cuda-path' to specify a
diff erent CUDA "
+ "install, pass a
diff erent GPU arch with '--cuda-gpu-arch', or pass "
+ "'--no-cuda-version-check'">;
def warn_drv_unknown_cuda_version: Warning<
- "Unknown CUDA version. %0 Assuming the latest supported version %1">,
+ "unknown CUDA version: %0; assuming the latest supported version %1">,
InGroup<CudaUnknownVersion>;
-def err_drv_cuda_host_arch : Error<"unsupported architecture '%0' for host compilation.">;
-def err_drv_mix_cuda_hip : Error<"Mixed Cuda and HIP compilation is not supported.">;
-def err_drv_bad_target_id : Error<"Invalid target ID: %0 (A target ID is a processor name "
- "followed by an optional list of predefined features post-fixed by a plus or minus sign deliminated "
- "by colon, e.g. 'gfx908:sramecc+:xnack-')">;
-def err_drv_bad_offload_arch_combo : Error<"Invalid offload arch combinations: %0 and %1 (For a specific "
- "processor, a feature should either exist in all offload archs, or not exist in any offload archs)">;
+def err_drv_cuda_host_arch : Error<
+ "unsupported architecture '%0' for host compilation">;
+def err_drv_mix_cuda_hip : Error<
+ "mixed CUDA and HIP compilation is not supported">;
+def err_drv_bad_target_id : Error<
+ "invalid target ID '%0'; format is a processor name followed by an optional "
+ "colon-delimited list of features followed by an enable/disable sign (e.g., "
+ "'gfx908:sramecc+:xnack-')">;
+def err_drv_bad_offload_arch_combo : Error<
+ "invalid offload arch combinations: '%0' and '%1' (for a specific processor, "
+ "a feature should either exist in all offload archs, or not exist in any "
+ "offload archs)">;
def err_drv_invalid_thread_model_for_target : Error<
"invalid thread model '%0' in '%1' for this target">;
def err_drv_invalid_linker_name : Error<
@@ -195,7 +203,7 @@ def err_target_unsupported_arch
def err_cpu_unsupported_isa
: Error<"CPU '%0' does not support '%1' execution mode">;
def err_arch_unsupported_isa
- : Error<"Architecture '%0' does not support '%1' execution mode">;
+ : Error<"architecture '%0' does not support '%1' execution mode">;
def err_drv_I_dash_not_supported : Error<
"'%0' not supported, please use -iquote instead">;
@@ -265,18 +273,23 @@ def err_drv_no_neon_modifier : Error<"[no]neon is not accepted as modifier, plea
def err_drv_invalid_omp_target : Error<"OpenMP target is invalid: '%0'">;
def err_drv_incompatible_omp_arch : Error<"OpenMP target architecture '%0' pointer size is incompatible with host '%1'">;
def err_drv_omp_host_ir_file_not_found : Error<
- "The provided host compiler IR file '%0' is required to generate code for OpenMP target regions but cannot be found.">;
+ "provided host compiler IR file '%0' is required to generate code for OpenMP "
+ "target regions but cannot be found">;
def err_drv_omp_host_target_not_supported : Error<
- "The target '%0' is not a supported OpenMP host target.">;
+ "target '%0' is not a supported OpenMP host target">;
def err_drv_expecting_fopenmp_with_fopenmp_targets : Error<
- "The option -fopenmp-targets must be used in conjunction with a -fopenmp option compatible with offloading, please use -fopenmp=libomp or -fopenmp=libiomp5.">;
+ "'-fopenmp-targets' must be used in conjunction with a '-fopenmp' option "
+ "compatible with offloading; e.g., '-fopenmp=libomp' or '-fopenmp=libiomp5'">;
def err_drv_omp_offload_target_missingbcruntime : Error<
- "No library '%0' found in the default clang lib directory or in LIBRARY_PATH. Please use --libomptarget-%1-bc-path to specify %1 bitcode library.">;
-def err_drv_omp_offload_target_bcruntime_not_found : Error<"Bitcode library '%0' does not exist.">;
-def err_drv_omp_offload_target_cuda_version_not_support : Error<"NVPTX target requires CUDA 9.2 or above. CUDA %0 is detected.">;
+ "no library '%0' found in the default clang lib directory or in LIBRARY_PATH"
+ "; use '--libomptarget-%1-bc-path' to specify %1 bitcode library">;
+def err_drv_omp_offload_target_bcruntime_not_found : Error<
+ "bitcode library '%0' does not exist">;
+def err_drv_omp_offload_target_cuda_version_not_support : Error<
+ "NVPTX target requires CUDA 9.2 or above; CUDA %0 detected">;
def warn_drv_omp_offload_target_duplicate : Warning<
- "The OpenMP offloading target '%0' is similar to target '%1' already specified - will be ignored.">,
- InGroup<OpenMPTarget>;
+ "OpenMP offloading target '%0' is similar to target '%1' already specified; "
+ "will be ignored">, InGroup<OpenMPTarget>;
def err_drv_unsupported_embed_bitcode
: Error<"%0 is not supported with -fembed-bitcode">;
def err_drv_bitcode_unsupported_on_toolchain : Error<
@@ -303,7 +316,8 @@ def warn_drv_unsupported_debug_info_opt_for_target : Warning<
"debug information option '%0' is not supported for target '%1'">,
InGroup<UnsupportedTargetOpt>;
def warn_drv_dwarf_version_limited_by_target : Warning<
- "debug information option '%0' is not supported. It needs DWARF-%2 but target '%1' only provides DWARF-%3.">,
+ "debug information option '%0' is not supported; requires DWARF-%2 but "
+ "target '%1' only provides DWARF-%3">,
InGroup<UnsupportedTargetOpt>;
def warn_c_kext : Warning<
"ignoring -fapple-kext which is valid for C++ and Objective-C++ only">;
@@ -370,7 +384,7 @@ def err_sls_hardening_arm_not_supported : Error<
def note_drv_command_failed_diag_msg : Note<
"diagnostic msg: %0">;
def note_drv_t_option_is_global : Note<
- "The last /TC or /TP option takes precedence over earlier instances">;
+ "the last '/TC' or '/TP' option takes precedence over earlier instances">;
def note_drv_address_sanitizer_debug_runtime : Note<
"AddressSanitizer doesn't support linking with debug runtime libraries yet">;
def note_drv_use_standard : Note<"use '%0'"
@@ -410,7 +424,8 @@ def err_test_module_file_extension_format : Error<
def warn_slash_u_filename : Warning<"'/U%0' treated as the '/U' option">,
InGroup<DiagGroup<"slash-u-filename">>;
-def note_use_dashdash : Note<"Use '--' to treat subsequent arguments as filenames">;
+def note_use_dashdash : Note<
+ "use '--' to treat subsequent arguments as filenames">;
def err_drv_ropi_rwpi_incompatible_with_pic : Error<
"embedded and GOT-based position independence are incompatible">;
@@ -479,14 +494,14 @@ def warn_drv_ps4_sdk_dir : Warning<
def err_drv_unsupported_linker : Error<"unsupported value '%0' for -linker option">;
def err_drv_defsym_invalid_format : Error<"defsym must be of the form: sym=value: %0">;
-def err_drv_defsym_invalid_symval : Error<"Value is not an integer: %0">;
+def err_drv_defsym_invalid_symval : Error<"value is not an integer: %0">;
def warn_drv_msvc_not_found : Warning<
"unable to find a Visual Studio installation; "
"try running Clang from a developer command prompt">,
InGroup<DiagGroup<"msvc-not-found">>;
def warn_drv_fuse_ld_path : Warning<
- "'-fuse-ld=' taking a path is deprecated. Use '--ld-path=' instead">,
+ "'-fuse-ld=' taking a path is deprecated; use '--ld-path=' instead">,
InGroup<FUseLdPath>, DefaultIgnore;
def warn_drv_fine_grained_bitfield_accesses_ignored : Warning<
@@ -506,11 +521,11 @@ def warn_drv_global_isel_incomplete_opt : Warning<
InGroup<GlobalISel>;
def warn_drv_moutline_unsupported_opt : Warning<
- "The '%0' architecture does not support -moutline; flag ignored">,
+ "'%0' does not support '-moutline'; flag ignored">,
InGroup<OptionIgnored>;
def warn_drv_moutline_atomics_unsupported_opt : Warning<
- "The '%0' architecture does not support -moutline-atomics; flag ignored">,
+ "'%0' does not support '-moutline-atomics'; flag ignored">,
InGroup<OptionIgnored>;
def warn_drv_darwin_sdk_invalid_settings : Warning<
@@ -518,25 +533,28 @@ def warn_drv_darwin_sdk_invalid_settings : Warning<
InGroup<DiagGroup<"darwin-sdk-settings">>;
def err_drv_trivial_auto_var_init_zero_disabled : Error<
- "-ftrivial-auto-var-init=zero hasn't been enabled. Enable it at your own peril for benchmarking purpose only with "
- "-enable-trivial-auto-var-init-zero-knowing-it-will-be-removed-from-clang">;
+ "'-ftrivial-auto-var-init=zero' hasn't been enabled; enable it at your own "
+ "peril for benchmarking purpose only with "
+ "'-enable-trivial-auto-var-init-zero-knowing-it-will-be-removed-from-clang'">;
def err_drv_trivial_auto_var_init_stop_after_missing_dependency : Error<
- "-ftrivial-auto-var-init-stop-after=* is used without -ftrivial-auto-var-init=zero or -ftrivial-auto-var-init=pattern.">;
+ "'-ftrivial-auto-var-init-stop-after=*' is used without "
+ "'-ftrivial-auto-var-init=zero' or '-ftrivial-auto-var-init=pattern'">;
def err_drv_trivial_auto_var_init_stop_after_invalid_value : Error<
- "-ftrivial-auto-var-init-stop-after=* only accepts positive integers.">;
+ "'-ftrivial-auto-var-init-stop-after=*' only accepts positive integers">;
-def warn_drv_msp430_hwmult_unsupported : Warning<"the given MCU does not "
- "support hardware multiply, but -mhwmult is set to %0.">,
+def warn_drv_msp430_hwmult_unsupported : Warning<
+ "the given MCU does not support hardware multiply, but '-mhwmult' is set to "
+ "%0">, InGroup<InvalidCommandLineArgument>;
+def warn_drv_msp430_hwmult_mismatch : Warning<
+ "the given MCU supports %0 hardware multiply, but '-mhwmult' is set to %1">,
InGroup<InvalidCommandLineArgument>;
-def warn_drv_msp430_hwmult_mismatch : Warning<"the given MCU supports %0 "
- "hardware multiply, but -mhwmult is set to %1.">,
- InGroup<InvalidCommandLineArgument>;
-def warn_drv_msp430_hwmult_no_device : Warning<"no MCU device specified, but "
- "'-mhwmult' is set to 'auto', assuming no hardware multiply. Use -mmcu to "
- "specify a MSP430 device, or -mhwmult to set hardware multiply type "
- "explicitly.">, InGroup<InvalidCommandLineArgument>;
+def warn_drv_msp430_hwmult_no_device : Warning<
+ "no MCU device specified, but '-mhwmult' is set to 'auto', assuming no "
+ "hardware multiply; use '-mmcu' to specify an MSP430 device, or '-mhwmult' "
+ "to set the hardware multiply type explicitly">,
+ InGroup<InvalidCommandLineArgument>;
def warn_drv_libstdcxx_not_found : Warning<
"include path for libstdc++ headers not found; pass '-stdlib=libc++' on the "
@@ -545,17 +563,23 @@ def warn_drv_libstdcxx_not_found : Warning<
def err_drv_cannot_mix_options : Error<"cannot specify '%1' along with '%0'">;
-def err_drv_invalid_object_mode : Error<"OBJECT_MODE setting %0 is not recognized and is not a valid setting.">;
+def err_drv_invalid_object_mode : Error<
+ "OBJECT_MODE setting %0 is not recognized and is not a valid setting">;
def err_aix_unsupported_tls_model : Error<"TLS model '%0' is not yet supported on AIX">;
-def err_invalid_cxx_abi : Error<"Invalid C++ ABI name '%0'">;
+def err_invalid_cxx_abi : Error<"invalid C++ ABI name '%0'">;
def err_unsupported_cxx_abi : Error<"C++ ABI '%0' is not supported on target triple '%1'">;
-def note_cc1_round_trip_original : Note<"Original arguments in round-trip: %0">;
-def note_cc1_round_trip_generated : Note<"Generated arguments #%0 in round-trip: %1">;
-def remark_cc1_round_trip_generated : Remark<"Generated arguments #%0 in round-trip: %1">, InGroup<RoundTripCC1Args>;
-def err_cc1_round_trip_fail_then_ok : Error<"Original arguments parse failed, then succeeded in round-trip">;
-def err_cc1_round_trip_ok_then_fail : Error<"Generated arguments parse failed in round-trip">;
-def err_cc1_round_trip_mismatch : Error<"Generated arguments do not match in round-trip">;
+def note_cc1_round_trip_original : Note<"original arguments in round-trip: %0">;
+def note_cc1_round_trip_generated : Note<
+ "generated arguments #%0 in round-trip: %1">;
+def remark_cc1_round_trip_generated : Remark<
+ "generated arguments #%0 in round-trip: %1">, InGroup<RoundTripCC1Args>;
+def err_cc1_round_trip_fail_then_ok : Error<
+ "original arguments parse failed, then succeeded in round-trip">;
+def err_cc1_round_trip_ok_then_fail : Error<
+ "generated arguments parse failed in round-trip">;
+def err_cc1_round_trip_mismatch : Error<
+ "generated arguments do not match in round-trip">;
}
diff --git a/clang/lib/Driver/ToolChains/Cuda.cpp b/clang/lib/Driver/ToolChains/Cuda.cpp
index 769eae14df513..c4d1ebdf69132 100644
--- a/clang/lib/Driver/ToolChains/Cuda.cpp
+++ b/clang/lib/Driver/ToolChains/Cuda.cpp
@@ -220,8 +220,7 @@ CudaInstallationDetector::CudaInstallationDetector(
VersionInfo.Version = (FS.exists(LibDevicePath + "/libdevice.10.bc"))
? Version = CudaVersion::LATEST
: Version = CudaVersion::CUDA_70;
- VersionInfo.DetectedVersion =
- "No version found in version.txt or cuda.h.";
+ VersionInfo.DetectedVersion = "no version found in version.txt or cuda.h";
}
Version = VersionInfo.Version;
diff --git a/clang/test/Driver/aarch64-outliner.c b/clang/test/Driver/aarch64-outliner.c
index eaf4e8ad96f92..6a29a94ef18f1 100644
--- a/clang/test/Driver/aarch64-outliner.c
+++ b/clang/test/Driver/aarch64-outliner.c
@@ -4,5 +4,5 @@
// RUN: %clang -target aarch64 -moutline -mno-outline -S %s -### 2>&1 | FileCheck %s -check-prefix=OFF
// OFF: "-mllvm" "-enable-machine-outliner=never"
// RUN: %clang -target x86_64 -moutline -S %s -### 2>&1 | FileCheck %s -check-prefix=WARN
-// WARN: warning: The 'x86_64' architecture does not support -moutline; flag ignored [-Woption-ignored]
+// WARN: warning: 'x86_64' does not support '-moutline'; flag ignored [-Woption-ignored]
// WARN-NOT: "-mllvm" "-enable-machine-outliner"
diff --git a/clang/test/Driver/aix-object-mode.c b/clang/test/Driver/aix-object-mode.c
index a4bc79a4b41d5..839ad441a1ff5 100644
--- a/clang/test/Driver/aix-object-mode.c
+++ b/clang/test/Driver/aix-object-mode.c
@@ -19,4 +19,4 @@
// RUN: env OBJECT_MODE=31 \
// RUN: not %clang -target powerpc-ibm-aix 2>&1 | FileCheck -check-prefix=DIAG %s
-// DIAG: error: OBJECT_MODE setting 31 is not recognized and is not a valid setting.
+// DIAG: error: OBJECT_MODE setting 31 is not recognized and is not a valid setting
diff --git a/clang/test/Driver/amdgpu-invalid-target-id.s b/clang/test/Driver/amdgpu-invalid-target-id.s
index e20f09745d71c..8c938c7f4bf17 100644
--- a/clang/test/Driver/amdgpu-invalid-target-id.s
+++ b/clang/test/Driver/amdgpu-invalid-target-id.s
@@ -6,40 +6,40 @@
// RUN: -mcpu=gfx908xnack -nostdlib \
// RUN: %s 2>&1 | FileCheck -check-prefix=NOPLUS %s
-// NOPLUS: error: Invalid target ID: gfx908xnack
+// NOPLUS: error: invalid target ID 'gfx908xnack'
// RUN: not %clang -target amdgcn-amd-amdpal \
// RUN: -mcpu=gfx908:xnack+:xnack+ -nostdlib \
// RUN: %s 2>&1 | FileCheck -check-prefix=ORDER %s
-// ORDER: error: Invalid target ID: gfx908:xnack+:xnack+
+// ORDER: error: invalid target ID 'gfx908:xnack+:xnack+'
// RUN: not %clang -target amdgcn--mesa3d \
// RUN: -mcpu=gfx908:unknown+ -nostdlib \
// RUN: %s 2>&1 | FileCheck -check-prefix=UNK %s
-// UNK: error: Invalid target ID: gfx908:unknown+
+// UNK: error: invalid target ID 'gfx908:unknown+'
// RUN: not %clang -target amdgcn-amd-amdhsa \
// RUN: -mcpu=gfx908:sram-ecc+:unknown+ -nostdlib \
// RUN: %s 2>&1 | FileCheck -check-prefix=MIXED %s
-// MIXED: error: Invalid target ID: gfx908:sram-ecc+:unknown+
+// MIXED: error: invalid target ID 'gfx908:sram-ecc+:unknown+'
// RUN: not %clang -target amdgcn-amd-amdhsa \
// RUN: -mcpu=gfx900:sram-ecc+ -nostdlib \
// RUN: %s 2>&1 | FileCheck -check-prefix=UNSUP %s
-// UNSUP: error: Invalid target ID: gfx900:sram-ecc+
+// UNSUP: error: invalid target ID 'gfx900:sram-ecc+'
// RUN: not %clang -target amdgcn-amd-amdhsa \
// RUN: -mcpu=gfx900:xnack -nostdlib \
// RUN: %s 2>&1 | FileCheck -check-prefix=NOSIGN %s
-// NOSIGN: error: Invalid target ID: gfx900:xnack
+// NOSIGN: error: invalid target ID 'gfx900:xnack'
// RUN: not %clang -target amdgcn-amd-amdhsa \
// RUN: -mcpu=gfx900+xnack -nostdlib \
// RUN: %s 2>&1 | FileCheck -check-prefix=NOCOLON %s
-// NOCOLON: error: Invalid target ID: gfx900+xnack
+// NOCOLON: error: invalid target ID 'gfx900+xnack'
diff --git a/clang/test/Driver/amdgpu-openmp-system-arch-fail.c b/clang/test/Driver/amdgpu-openmp-system-arch-fail.c
index 3e6e425e09a9a..dddd74d736618 100644
--- a/clang/test/Driver/amdgpu-openmp-system-arch-fail.c
+++ b/clang/test/Driver/amdgpu-openmp-system-arch-fail.c
@@ -15,14 +15,14 @@
// case when amdgpu_arch returns nothing or fails
// RUN: %clang -### --target=x86_64-unknown-linux-gnu -fopenmp -fopenmp-targets=amdgcn-amd-amdhsa -nogpulib --amdgpu-arch-tool=%t/amdgpu_arch_fail %s 2>&1 \
// RUN: | FileCheck %s --check-prefix=NO-OUTPUT-ERROR
-// NO-OUTPUT-ERROR: error: Cannot determine AMDGPU architecture{{.*}}Exited with error code 1. Consider passing it via --march
+// NO-OUTPUT-ERROR: error: cannot determine AMDGPU architecture{{.*}}Exited with error code 1; consider passing it via '--march'
// case when amdgpu_arch returns multiple gpus but all are
diff erent
// RUN: %clang -### --target=x86_64-unknown-linux-gnu -fopenmp -fopenmp-targets=amdgcn-amd-amdhsa -nogpulib --amdgpu-arch-tool=%t/amdgpu_arch_
diff erent %s 2>&1 \
// RUN: | FileCheck %s --check-prefix=MULTIPLE-OUTPUT-ERROR
-// MULTIPLE-OUTPUT-ERROR: error: Cannot determine AMDGPU architecture: Multiple AMD GPUs found with
diff erent archs. Consider passing it via --march
+// MULTIPLE-OUTPUT-ERROR: error: cannot determine AMDGPU architecture: Multiple AMD GPUs found with
diff erent archs; consider passing it via '--march'
// case when amdgpu_arch does not return anything with successful execution
// RUN: %clang -### --target=x86_64-unknown-linux-gnu -fopenmp -fopenmp-targets=amdgcn-amd-amdhsa -nogpulib --amdgpu-arch-tool=%t/amdgpu_arch_empty %s 2>&1 \
// RUN: | FileCheck %s --check-prefix=EMPTY-OUTPUT
-// EMPTY-OUTPUT: error: Cannot determine AMDGPU architecture: No AMD GPU detected in the system. Consider passing it via --march
+// EMPTY-OUTPUT: error: cannot determine AMDGPU architecture: No AMD GPU detected in the system; consider passing it via '--march'
diff --git a/clang/test/Driver/arm-thumb-only-cores.c b/clang/test/Driver/arm-thumb-only-cores.c
index cf40bf0ffa4a2..dbc3a47afcbdc 100644
--- a/clang/test/Driver/arm-thumb-only-cores.c
+++ b/clang/test/Driver/arm-thumb-only-cores.c
@@ -6,7 +6,7 @@
// RUN: | FileCheck --check-prefix ARMV7M %s
// RUN: not %clang -target armv7m-unknown-linux -mno-thumb %s -o /dev/null 2>&1 \
// RUN: | FileCheck --check-prefix ARMV7M %s
-// ARMV7M: error: Architecture 'armv7m' does not support 'ARM' execution mode
+// ARMV7M: error: architecture 'armv7m' does not support 'ARM' execution mode
//
// RUN: %clang -S -emit-llvm -target arm-unknown-linux -mcpu=cortex-m0 %s -o /dev/null 2>&1
// M-Profile CPUs default to Thumb mode even if arm triples are provided.
diff --git a/clang/test/Driver/cl-inputs.c b/clang/test/Driver/cl-inputs.c
index 8eb44517ee167..35e4fbf843ef0 100644
--- a/clang/test/Driver/cl-inputs.c
+++ b/clang/test/Driver/cl-inputs.c
@@ -28,7 +28,7 @@
// RUN: %clang_cl /TP /TC /TP -### -- %s 2>&1 | FileCheck -check-prefix=WARN %s
// WARN: warning: overriding '/TP' option with '/TC'
// WARN: warning: overriding '/TC' option with '/TP'
-// WARN: note: The last /TC or /TP option takes precedence over earlier instances
+// WARN: note: the last '/TC' or '/TP' option takes precedence over earlier instances
// WARN-NOT: note
// MSYS2_ARG_CONV_EXCL tells MSYS2 to skip conversion of the specified argument.
diff --git a/clang/test/Driver/cl-options.c b/clang/test/Driver/cl-options.c
index 038badd847ce8..a5e1402c51d6e 100644
--- a/clang/test/Driver/cl-options.c
+++ b/clang/test/Driver/cl-options.c
@@ -538,7 +538,7 @@
// for other flags too, but this is the one people run into.)
// RUN: %clang_cl /c /Users/me/myfile.c -### 2>&1 | FileCheck -check-prefix=SlashU %s
// SlashU: warning: '/Users/me/myfile.c' treated as the '/U' option
-// SlashU: note: Use '--' to treat subsequent arguments as filenames
+// SlashU: note: use '--' to treat subsequent arguments as filenames
// RTTI is on by default. /GR- controls -fno-rtti-data.
// RUN: %clang_cl /c /GR- -### -- %s 2>&1 | FileCheck -check-prefix=NoRTTI %s
diff --git a/clang/test/Driver/clang_f_opts.c b/clang/test/Driver/clang_f_opts.c
index d729378403f3f..979ab4e4299f8 100644
--- a/clang/test/Driver/clang_f_opts.c
+++ b/clang/test/Driver/clang_f_opts.c
@@ -581,11 +581,11 @@
// RUN: %clang -### -S -ftrivial-auto-var-init-stop-after=0 %s 2>&1 | FileCheck -check-prefix=CHECK-TRIVIAL-STOP-AFTER-MISSING-DEPENDENCY %s
// RUN: %clang -### -S -ftrivial-auto-var-init=pattern -ftrivial-auto-var-init-stop-after=0 %s 2>&1 | FileCheck -check-prefix=CHECK-TRIVIAL-PATTERN-STOP-AFTER-INVALID-VALUE %s
// RUN: %clang -### -S -ftrivial-auto-var-init=zero -enable-trivial-auto-var-init-zero-knowing-it-will-be-removed-from-clang -ftrivial-auto-var-init-stop-after=0 %s 2>&1 | FileCheck -check-prefix=CHECK-TRIVIAL-ZERO-STOP-AFTER-INVALID-VALUE %s
-// CHECK-TRIVIAL-PATTERN-STOP-AFTER-NOT: is used without -ftrivial-auto-var-init
+// CHECK-TRIVIAL-PATTERN-STOP-AFTER-NOT: is used without '-ftrivial-auto-var-init'
// CHECK-TRIVIAL-PATTERN-STOP-AFTER-NOT: only accepts positive integers
-// CHECK-TRIVIAL-ZERO-STOP-AFTER-NOT: is used without -ftrivial-auto-var-init
+// CHECK-TRIVIAL-ZERO-STOP-AFTER-NOT: is used without '-ftrivial-auto-var-init'
// CHECK-TRIVIAL-ZERO-STOP-AFTER-NOT: only accepts positive integers
-// CHECK-TRIVIAL-STOP-AFTER-MISSING-DEPENDENCY: used without -ftrivial-auto-var-init
+// CHECK-TRIVIAL-STOP-AFTER-MISSING-DEPENDENCY: used without '-ftrivial-auto-var-init=zero' or
// CHECK-TRIVIAL-PATTERN-STOP-AFTER-INVALID-VALUE: only accepts positive integers
// CHECK-TRIVIAL-ZERO-STOP-AFTER-INVALID-VALUE: only accepts positive integers
diff --git a/clang/test/Driver/cuda-bad-arch.cu b/clang/test/Driver/cuda-bad-arch.cu
index 8f52f6e4b6c12..1857f141649bc 100644
--- a/clang/test/Driver/cuda-bad-arch.cu
+++ b/clang/test/Driver/cuda-bad-arch.cu
@@ -13,7 +13,7 @@
// RUN: %clang -### -target x86_64-linux-gnu --cuda-gpu-arch=gfx900 -c %s 2>&1 \
// RUN: | FileCheck -check-prefix BAD %s
-// BAD: error: Unsupported CUDA gpu architecture
+// BAD: error: unsupported CUDA gpu architecture
// RUN: %clang -### -v --target=x86_64-linux-gnu --cuda-gpu-arch=sm_21 \
// RUN: --cuda-path=%S/Inputs/CUDA_90/usr/local/cuda %s 2>&1 \
@@ -39,5 +39,5 @@
// RUN: | FileCheck -check-prefix HOST_AMDGCN %s
// OK-NOT: error: Unsupported CUDA gpu architecture
-// HOST_NVPTX: error: unsupported architecture 'nvptx' for host compilation.
-// HOST_AMDGCN: error: unsupported architecture 'amdgcn' for host compilation.
+// HOST_NVPTX: error: unsupported architecture 'nvptx' for host compilation
+// HOST_AMDGCN: error: unsupported architecture 'amdgcn' for host compilation
diff --git a/clang/test/Driver/cuda-detect.cu b/clang/test/Driver/cuda-detect.cu
index 5f90b6b6678d6..8fcdb7108f355 100644
--- a/clang/test/Driver/cuda-detect.cu
+++ b/clang/test/Driver/cuda-detect.cu
@@ -166,7 +166,7 @@
// NO-LIBDEVICE: Found CUDA installation: {{.*}}/Inputs/CUDA-nolibdevice/usr/local/cuda
// NOCUDA-NOT: Found CUDA installation:
-// MISSINGLIBDEVICE: error: cannot find libdevice for sm_20.
+// MISSINGLIBDEVICE: error: cannot find libdevice for sm_20;
// COMMON: "-triple" "nvptx-nvidia-cuda"
// COMMON64: "-triple" "nvptx64-nvidia-cuda"
diff --git a/clang/test/Driver/cuda-omp-unsupported-debug-options.cu b/clang/test/Driver/cuda-omp-unsupported-debug-options.cu
index 7fff17245581f..b75e79c2249bf 100644
--- a/clang/test/Driver/cuda-omp-unsupported-debug-options.cu
+++ b/clang/test/Driver/cuda-omp-unsupported-debug-options.cu
@@ -57,7 +57,7 @@
// COMMON: warning: debug information option '{{-gz|-fdebug-info-for-profiling|-gsplit-dwarf|-glldb|-gcodeview|-gmodules|-gembed-source|-fdebug-macro|-ggnu-pubnames|-gdwarf-aranges|-fdebug-types-section}}' is not supported
// WARN-SAME: for target 'nvptx64-nvidia-cuda' [-Wunsupported-target-opt]
-// WARN-GES-SAME: It needs DWARF-5 but target 'nvptx64-nvidia-cuda' only provides DWARF-2. [-Wunsupported-target-opt]
+// WARN-GES-SAME: requires DWARF-5 but target 'nvptx64-nvidia-cuda' only provides DWARF-2 [-Wunsupported-target-opt]
// COMMON-NOT: debug information option '{{.*}}' is not supported for target 'x86
// COMMON: "-triple" "nvptx64-nvidia-cuda"
// COMMON-NOT: {{-compress-debug|-fdebug-info-for-profiling|lldb|codeview|module-format|embed-source|debug-info-macro|gnu-pubnames|generate-arange-section|generate-type-units}}
diff --git a/clang/test/Driver/cuda-options-freebsd.cu b/clang/test/Driver/cuda-options-freebsd.cu
index cee38e48b2721..18053304687a5 100644
--- a/clang/test/Driver/cuda-options-freebsd.cu
+++ b/clang/test/Driver/cuda-options-freebsd.cu
@@ -190,7 +190,7 @@
// NOARCH-SM30-NOT: "-cc1"{{.*}}"-target-cpu" "sm_30"
// ARCH-SM35: "-cc1"{{.*}}"-target-cpu" "sm_35"
// NOARCH-SM35-NOT: "-cc1"{{.*}}"-target-cpu" "sm_35"
-// ARCHALLERROR: error: Unsupported CUDA gpu architecture: all
+// ARCHALLERROR: error: unsupported CUDA gpu architecture: all
// Match device-side preprocessor and compiler phases with -save-temps.
// DEVICE-SAVE: "-cc1" "-triple" "nvptx64-nvidia-cuda"
diff --git a/clang/test/Driver/cuda-options.cu b/clang/test/Driver/cuda-options.cu
index 5b67d7e4d04ff..a1b66672572da 100644
--- a/clang/test/Driver/cuda-options.cu
+++ b/clang/test/Driver/cuda-options.cu
@@ -196,7 +196,7 @@
// NOARCH-SM30-NOT: "-cc1"{{.*}}"-target-cpu" "sm_30"
// ARCH-SM35: "-cc1"{{.*}}"-target-cpu" "sm_35"
// NOARCH-SM35-NOT: "-cc1"{{.*}}"-target-cpu" "sm_35"
-// ARCHALLERROR: error: Unsupported CUDA gpu architecture: all
+// ARCHALLERROR: error: unsupported CUDA gpu architecture: all
// Match device-side preprocessor and compiler phases with -save-temps.
// DEVICE-SAVE: "-cc1" "-triple" "nvptx64-nvidia-cuda"
diff --git a/clang/test/Driver/cuda-version-check.cu b/clang/test/Driver/cuda-version-check.cu
index bc04794375a96..58447637ec3a3 100644
--- a/clang/test/Driver/cuda-version-check.cu
+++ b/clang/test/Driver/cuda-version-check.cu
@@ -72,7 +72,7 @@
// ERR_SM61: error: GPU arch sm_61 {{.*}}
// ERR_SM61-NOT: error: GPU arch sm_61
-// UNKNOWN_VERSION_V: Unknown CUDA version. version.txt:{{.*}}. Assuming the latest supported version
-// UNKNOWN_VERSION_H: Unknown CUDA version. cuda.h: CUDA_VERSION={{.*}}. Assuming the latest supported version
-// UNKNOWN_VERSION: Unknown CUDA version. No version found in version.txt or cuda.h. Assuming the latest supported version
-// UNKNOWN_VERSION_CXX-NOT: Unknown CUDA version
+// UNKNOWN_VERSION_V: unknown CUDA version: version.txt:{{.*}}; assuming the latest supported version
+// UNKNOWN_VERSION_H: unknown CUDA version: cuda.h: CUDA_VERSION={{.*}}; assuming the latest supported version
+// UNKNOWN_VERSION: unknown CUDA version: no version found in version.txt or cuda.h; assuming the latest supported version
+// UNKNOWN_VERSION_CXX-NOT: unknown CUDA version
diff --git a/clang/test/Driver/defsym.s b/clang/test/Driver/defsym.s
index 4d914ac7365c7..ae2b1fd919479 100644
--- a/clang/test/Driver/defsym.s
+++ b/clang/test/Driver/defsym.s
@@ -24,7 +24,7 @@
// RUN: not %clang -c -integrated-as -o /dev/null %s \
// RUN: -Wa,-defsym,abc=1a2b3c \
// RUN: 2>&1 | FileCheck %s --check-prefix=CHECK-DEFSYM-ERR3
-// CHECK-DEFSYM-ERR3: error: Value is not an integer: 1a2b3c
+// CHECK-DEFSYM-ERR3: error: value is not an integer: 1a2b3c
// RUN: not %clang -c -integrated-as -o /dev/null %s \
// RUN: -Wa,-defsym \
diff --git a/clang/test/Driver/fuse-ld.c b/clang/test/Driver/fuse-ld.c
index 338d73e530e50..74a2e5f4d9654 100644
--- a/clang/test/Driver/fuse-ld.c
+++ b/clang/test/Driver/fuse-ld.c
@@ -2,7 +2,7 @@
// RUN: %clang %s -### -target x86_64-unknown-linux -Wfuse-ld-path \
// RUN: -fuse-ld=/usr/local/bin/or1k-linux-ld 2>&1 | \
// RUN: FileCheck %s --check-prefix=CHECK-ABSOLUTE-LD
-// CHECK-ABSOLUTE-LD: warning: '-fuse-ld=' taking a path is deprecated. Use '--ld-path=' instead
+// CHECK-ABSOLUTE-LD: warning: '-fuse-ld=' taking a path is deprecated; use '--ld-path=' instead
// CHECK-ABSOLUTE-LD: /usr/local/bin/or1k-linux-ld
// RUN: %clang %s -### -target x86_64-unknown-linux -Wextra \
diff --git a/clang/test/Driver/hip-inputs.hip b/clang/test/Driver/hip-inputs.hip
index 2febe2039ec02..57f3f88623d24 100644
--- a/clang/test/Driver/hip-inputs.hip
+++ b/clang/test/Driver/hip-inputs.hip
@@ -19,5 +19,5 @@
// RUN: --hip-link %S/Inputs/hip_multiple_inputs/a.cu 2>&1 \
// RUN: | FileCheck -check-prefix=MIX %s
-// CHECK-NOT: error: Mixed Cuda and HIP compilation is not supported.
-// MIX: error: Mixed Cuda and HIP compilation is not supported.
+// CHECK-NOT: error: mixed CUDA and HIP compilation is not supported
+// MIX: error: mixed CUDA and HIP compilation is not supported
diff --git a/clang/test/Driver/hip-invalid-target-id.hip b/clang/test/Driver/hip-invalid-target-id.hip
index 7514998a4bb73..335dc342ba8ea 100644
--- a/clang/test/Driver/hip-invalid-target-id.hip
+++ b/clang/test/Driver/hip-invalid-target-id.hip
@@ -8,7 +8,7 @@
// RUN: --rocm-path=%S/Inputs/rocm \
// RUN: %s 2>&1 | FileCheck -check-prefix=NOPLUS %s
-// NOPLUS: error: Invalid target ID: gfx908xnack
+// NOPLUS: error: invalid target ID 'gfx908xnack'
// RUN: not %clang -### -target x86_64-linux-gnu \
// RUN: -x hip --offload-arch=gfx900 \
@@ -16,7 +16,7 @@
// RUN: --rocm-path=%S/Inputs/rocm \
// RUN: %s 2>&1 | FileCheck -check-prefix=ORDER %s
-// ORDER: error: Invalid target ID: gfx908:xnack+:xnack+
+// ORDER: error: invalid target ID 'gfx908:xnack+:xnack+'
// RUN: not %clang -### -target x86_64-linux-gnu \
// RUN: -x hip --offload-arch=gfx908 \
@@ -26,7 +26,7 @@
// RUN: --rocm-path=%S/Inputs/rocm \
// RUN: %s 2>&1 | FileCheck -check-prefix=UNK %s
-// UNK: error: Invalid target ID: gfx908:unknown+
+// UNK: error: invalid target ID 'gfx908:unknown+'
// RUN: not %clang -### -target x86_64-linux-gnu \
// RUN: -x hip --offload-arch=gfx908 \
@@ -35,7 +35,7 @@
// RUN: --rocm-path=%S/Inputs/rocm \
// RUN: %s 2>&1 | FileCheck -check-prefix=MIXED %s
-// MIXED: error: Invalid target ID: gfx908:sramecc+:unknown+
+// MIXED: error: invalid target ID 'gfx908:sramecc+:unknown+'
// RUN: not %clang -### -target x86_64-linux-gnu \
// RUN: -x hip --offload-arch=gfx908 \
@@ -43,7 +43,7 @@
// RUN: --rocm-path=%S/Inputs/rocm \
// RUN: %s 2>&1 | FileCheck -check-prefix=UNSUP %s
-// UNSUP: error: Invalid target ID: gfx900:sramecc+
+// UNSUP: error: invalid target ID 'gfx900:sramecc+'
/ RUN: not %clang -### -target x86_64-linux-gnu \
// RUN: -x hip --offload-arch=gfx908 \
@@ -51,7 +51,7 @@
// RUN: --rocm-path=%S/Inputs/rocm \
// RUN: %s 2>&1 | FileCheck -check-prefix=NOSIGN %s
-// NOSIGN: error: Invalid target ID: gfx900:xnack
+// NOSIGN: error: invalid target ID 'gfx900:xnack'
// RUN: not %clang -### -target x86_64-linux-gnu \
// RUN: -x hip --offload-arch=gfx908 \
@@ -59,7 +59,7 @@
// RUN: --rocm-path=%S/Inputs/rocm \
// RUN: %s 2>&1 | FileCheck -check-prefix=NOCOLON %s
-// NOCOLON: error: Invalid target ID: gfx900+xnack
+// NOCOLON: error: invalid target ID 'gfx900+xnack'
// RUN: not %clang -### -target x86_64-linux-gnu \
// RUN: -x hip --offload-arch=gfx908 \
@@ -67,4 +67,4 @@
// RUN: --rocm-path=%S/Inputs/rocm \
// RUN: %s 2>&1 | FileCheck -check-prefix=COMBO %s
-// COMBO: error: Invalid offload arch combinations: gfx908 and gfx908:xnack+
+// COMBO: error: invalid offload arch combinations: 'gfx908' and 'gfx908:xnack+'
diff --git a/clang/test/Driver/invalid-target-id.cl b/clang/test/Driver/invalid-target-id.cl
index a78a6e0ff86c7..daeed9b15da5f 100644
--- a/clang/test/Driver/invalid-target-id.cl
+++ b/clang/test/Driver/invalid-target-id.cl
@@ -6,40 +6,40 @@
// RUN: -mcpu=gfx908xnack -nostdlib \
// RUN: %s 2>&1 | FileCheck -check-prefix=NOPLUS %s
-// NOPLUS: error: Invalid target ID: gfx908xnack
+// NOPLUS: error: invalid target ID 'gfx908xnack'
// RUN: not %clang -target amdgcn-amd-amdpal \
// RUN: -mcpu=gfx908:xnack+:xnack+ -nostdlib \
// RUN: %s 2>&1 | FileCheck -check-prefix=ORDER %s
-// ORDER: error: Invalid target ID: gfx908:xnack+:xnack+
+// ORDER: error: invalid target ID 'gfx908:xnack+:xnack+'
// RUN: not %clang -target amdgcn--mesa3d \
// RUN: -mcpu=gfx908:unknown+ -nostdlib \
// RUN: %s 2>&1 | FileCheck -check-prefix=UNK %s
-// UNK: error: Invalid target ID: gfx908:unknown+
+// UNK: error: invalid target ID 'gfx908:unknown+'
// RUN: not %clang -target amdgcn-amd-amdhsa \
// RUN: -mcpu=gfx908:sramecc+:unknown+ -nostdlib \
// RUN: %s 2>&1 | FileCheck -check-prefix=MIXED %s
-// MIXED: error: Invalid target ID: gfx908:sramecc+:unknown+
+// MIXED: error: invalid target ID 'gfx908:sramecc+:unknown+'
// RUN: not %clang -target amdgcn-amd-amdhsa \
// RUN: -mcpu=gfx900:sramecc+ -nostdlib \
// RUN: %s 2>&1 | FileCheck -check-prefix=UNSUP %s
-// UNSUP: error: Invalid target ID: gfx900:sramecc+
+// UNSUP: error: invalid target ID 'gfx900:sramecc+'
// RUN: not %clang -target amdgcn-amd-amdhsa \
// RUN: -mcpu=gfx900:xnack -nostdlib \
// RUN: %s 2>&1 | FileCheck -check-prefix=NOSIGN %s
-// NOSIGN: error: Invalid target ID: gfx900:xnack
+// NOSIGN: error: invalid target ID 'gfx900:xnack'
// RUN: not %clang -target amdgcn-amd-amdhsa \
// RUN: -mcpu=gfx900+xnack -nostdlib \
// RUN: %s 2>&1 | FileCheck -check-prefix=NOCOLON %s
-// NOCOLON: error: Invalid target ID: gfx900+xnack
+// NOCOLON: error: invalid target ID 'gfx900+xnack'
diff --git a/clang/test/Driver/msp430-hwmult.c b/clang/test/Driver/msp430-hwmult.c
index d292d9330edf0..ce52608d25866 100644
--- a/clang/test/Driver/msp430-hwmult.c
+++ b/clang/test/Driver/msp430-hwmult.c
@@ -28,15 +28,15 @@
// RUN: %clang -### -target msp430 %s -mhwmult=auto 2>&1 | FileCheck --check-prefix=WRN-NODEV %s
// WRN-NODEV: warning: no MCU device specified, but '-mhwmult' is set to 'auto',
-// assuming no hardware multiply. Use -mmcu to specify a MSP430 device,
-// or -mhwmult to set hardware multiply type explicitly.
+// assuming no hardware multiply; use '-mmcu' to specify a MSP430 device,
+// or '-mhwmult' to set hardware multiply type explicitly.
// RUN: %clang -### -target msp430 %s -mhwmult=16bit -mmcu=msp430c111 2>&1 | FileCheck --check-prefix=WRN-UNSUP %s
// RUN: %clang -### -target msp430 %s -mhwmult=32bit -mmcu=msp430c111 2>&1 | FileCheck --check-prefix=WRN-UNSUP %s
// RUN: %clang -### -target msp430 %s -mhwmult=f5series -mmcu=msp430c111 2>&1 | FileCheck --check-prefix=WRN-UNSUP %s
-// WRN-UNSUP: warning: the given MCU does not support hardware multiply, but -mhwmult is set to
+// WRN-UNSUP: warning: the given MCU does not support hardware multiply, but '-mhwmult' is set to
// RUN: %clang -### -target msp430 %s -mhwmult=16bit -mmcu=msp430f4783 2>&1 | FileCheck --check-prefix=WRN-MISMCH %s
// RUN: %clang -### -target msp430 %s -mhwmult=32bit -mmcu=msp430f147 2>&1 | FileCheck --check-prefix=WRN-MISMCH %s
// RUN: %clang -### -target msp430 %s -mhwmult=f5series -mmcu=msp430f4783 2>&1 | FileCheck --check-prefix=WRN-MISMCH %s
-// WRN-MISMCH: warning: the given MCU supports {{.*}} hardware multiply, but -mhwmult is set to {{.*}}
+// WRN-MISMCH: warning: the given MCU supports {{.*}} hardware multiply, but '-mhwmult' is set to {{.*}}
diff --git a/clang/test/Driver/openmp-offload-gpu.c b/clang/test/Driver/openmp-offload-gpu.c
index 79559e6f3cfca..dafedfe70e069 100644
--- a/clang/test/Driver/openmp-offload-gpu.c
+++ b/clang/test/Driver/openmp-offload-gpu.c
@@ -180,7 +180,7 @@
// RUN: -fopenmp-relocatable-target -save-temps -no-canonical-prefixes %s 2>&1 \
// RUN: | FileCheck -check-prefix=CHK-BCLIB-WARN %s
-// CHK-BCLIB-WARN: No library 'libomptarget-nvptx-sm_35.bc' found in the default clang lib directory or in LIBRARY_PATH. Please use --libomptarget-nvptx-bc-path to specify nvptx bitcode library.
+// CHK-BCLIB-WARN: no library 'libomptarget-nvptx-sm_35.bc' found in the default clang lib directory or in LIBRARY_PATH; use '--libomptarget-nvptx-bc-path' to specify nvptx bitcode library
/// ###########################################################################
@@ -191,7 +191,7 @@
// RUN: -fopenmp-relocatable-target -save-temps -no-canonical-prefixes %s 2>&1 \
// RUN: | FileCheck -check-prefix=CHK-BCLIB-ERROR %s
-// CHK-BCLIB-ERROR: Bitcode library 'not-exist.bc' does not exist.
+// CHK-BCLIB-ERROR: bitcode library 'not-exist.bc' does not exist
/// ###########################################################################
@@ -201,7 +201,7 @@
// RUN: -fopenmp-relocatable-target -save-temps -no-canonical-prefixes %s 2>&1 \
// RUN: | FileCheck -check-prefix=CHK-CUDA-VERSION-ERROR %s
-// CHK-CUDA-VERSION-ERROR: NVPTX target requires CUDA 9.2 or above. CUDA 9.0 is detected.
+// CHK-CUDA-VERSION-ERROR: NVPTX target requires CUDA 9.2 or above; CUDA 9.0 detected
/// Check that debug info is emitted in dwarf-2
// RUN: %clang -### -no-canonical-prefixes -fopenmp=libomp -fopenmp-targets=nvptx64-nvidia-cuda -Xopenmp-target -march=sm_60 %s -g -O1 --no-cuda-noopt-device-debug 2>&1 \
diff --git a/clang/test/Driver/openmp-offload.c b/clang/test/Driver/openmp-offload.c
index 4f28bf7b1e175..6d4c039fdff69 100644
--- a/clang/test/Driver/openmp-offload.c
+++ b/clang/test/Driver/openmp-offload.c
@@ -28,14 +28,14 @@
// RUN: | FileCheck -check-prefix=CHK-NO-FOPENMP %s
// RUN: %clang -### -fopenmp=libgomp -fopenmp-targets=powerpc64le-ibm-linux-gnu %s 2>&1 \
// RUN: | FileCheck -check-prefix=CHK-NO-FOPENMP %s
-// CHK-NO-FOPENMP: error: The option -fopenmp-targets must be used in conjunction with a -fopenmp option compatible with offloading, please use -fopenmp=libomp or -fopenmp=libiomp5.
+// CHK-NO-FOPENMP: error: '-fopenmp-targets' must be used in conjunction with a '-fopenmp' option compatible with offloading; e.g., '-fopenmp=libomp' or '-fopenmp=libiomp5'
/// ###########################################################################
/// Check warning for duplicate offloading targets.
// RUN: %clang -### -ccc-print-phases -fopenmp=libomp -fopenmp-targets=powerpc64le-ibm-linux-gnu,powerpc64le-ibm-linux-gnu %s 2>&1 \
// RUN: | FileCheck -check-prefix=CHK-DUPLICATES %s
-// CHK-DUPLICATES: warning: The OpenMP offloading target 'powerpc64le-ibm-linux-gnu' is similar to target 'powerpc64le-ibm-linux-gnu' already specified - will be ignored.
+// CHK-DUPLICATES: warning: OpenMP offloading target 'powerpc64le-ibm-linux-gnu' is similar to target 'powerpc64le-ibm-linux-gnu' already specified; will be ignored
/// ###########################################################################
diff --git a/clang/test/Driver/rocm-detect.cl b/clang/test/Driver/rocm-detect.cl
index 94a4068679af3..e53e69ac40f61 100644
--- a/clang/test/Driver/rocm-detect.cl
+++ b/clang/test/Driver/rocm-detect.cl
@@ -15,7 +15,7 @@
// RUN: --rocm-path=%S/Inputs/rocm %s 2>&1 \
// RUN: | FileCheck -check-prefixes=COMMON,NODEFAULTLIBS %s
-// GFX902-DEFAULTLIBS: error: cannot find ROCm device library for gfx902. Provide its path via --rocm-path or --rocm-device-lib-path, or pass -nogpulib to build without ROCm device library
+// GFX902-DEFAULTLIBS: error: cannot find ROCm device library for gfx902; provide its path via '--rocm-path' or '--rocm-device-lib-path', or pass '-nogpulib' to build without ROCm device library
// NODEFAULTLIBS-NOT: error: cannot find
diff --git a/clang/test/Driver/rocm-detect.hip b/clang/test/Driver/rocm-detect.hip
index 247e106054cff..b54107f2bd014 100644
--- a/clang/test/Driver/rocm-detect.hip
+++ b/clang/test/Driver/rocm-detect.hip
@@ -69,7 +69,7 @@
// RUN: %T/rocm-spack/llvm-amdgpu-4.0.0-ieagcs7inf7runpyfvepqkurasoglq4z/bin/clang --version 2>&1 \
// RUN: | FileCheck -check-prefixes=SPACK-MISS-SILENT %s
-// GFX902-DEFAULTLIBS: error: cannot find ROCm device library for gfx902. Provide its path via --rocm-path or --rocm-device-lib-path, or pass -nogpulib to build without ROCm device library
+// GFX902-DEFAULTLIBS: error: cannot find ROCm device library for gfx902; provide its path via '--rocm-path' or '--rocm-device-lib-path', or pass '-nogpulib' to build without ROCm device library
// NODEFAULTLIBS-NOT: error: cannot find
diff --git a/clang/test/Driver/rocm-not-found.cl b/clang/test/Driver/rocm-not-found.cl
index 122f826714b51..2a2a2de37675d 100644
--- a/clang/test/Driver/rocm-not-found.cl
+++ b/clang/test/Driver/rocm-not-found.cl
@@ -5,7 +5,7 @@
// RUN: %clang -### --sysroot=%s/no-rocm-there -target amdgcn--amdhsa %s 2>&1 | FileCheck %s --check-prefix ERR
// RUN: %clang -### --rocm-path=%s/no-rocm-there -target amdgcn--amdhsa %s 2>&1 | FileCheck %s --check-prefix ERR
-// ERR: cannot find ROCm device library. Provide its path via --rocm-path or --rocm-device-lib-path, or pass -nogpulib to build without ROCm device library
+// ERR: cannot find ROCm device library; provide its path via '--rocm-path' or '--rocm-device-lib-path', or pass '-nogpulib' to build without ROCm device library
// Accept nogpulib or nostdlib for OpenCL.
// RUN: %clang -### -nogpulib --rocm-path=%s/no-rocm-there %s 2>&1 | FileCheck %s --check-prefix OK
diff --git a/clang/test/Frontend/invalid-cxx-abi.cpp b/clang/test/Frontend/invalid-cxx-abi.cpp
index df1ea9463670b..923d9d205739b 100644
--- a/clang/test/Frontend/invalid-cxx-abi.cpp
+++ b/clang/test/Frontend/invalid-cxx-abi.cpp
@@ -1,8 +1,8 @@
// These shouldn't be valid -fc++-abi values.
// RUN: not %clang_cc1 -S -emit-llvm -o /dev/null -fc++-abi=InvalidABI %s 2>&1 | FileCheck %s -check-prefix=INVALID
// RUN: not %clang_cc1 -S -emit-llvm -o /dev/null -fc++-abi=Fuchsia %s 2>&1 | FileCheck %s -check-prefix=CASE-SENSITIVE
-// INVALID: error: Invalid C++ ABI name 'InvalidABI'
-// CASE-SENSITIVE: error: Invalid C++ ABI name 'Fuchsia'
+// INVALID: error: invalid C++ ABI name 'InvalidABI'
+// CASE-SENSITIVE: error: invalid C++ ABI name 'Fuchsia'
// Some C++ ABIs are not supported on some platforms.
// RUN: not %clang_cc1 -S -emit-llvm -o /dev/null -fc++-abi=fuchsia -triple i386 %s 2>&1 | FileCheck %s -check-prefix=UNSUPPORTED-FUCHSIA
diff --git a/clang/test/Frontend/round-trip-cc1-args.c b/clang/test/Frontend/round-trip-cc1-args.c
index 403fa982aafb2..04a73715ebaa1 100644
--- a/clang/test/Frontend/round-trip-cc1-args.c
+++ b/clang/test/Frontend/round-trip-cc1-args.c
@@ -4,4 +4,4 @@
// CHECK-WITHOUT-ROUND-TRIP-NOT: remark:
// CHECK-ROUND-TRIP-WITHOUT-REMARKS-NOT: remark:
-// CHECK-ROUND-TRIP-WITH-REMARKS: remark: Generated arguments #{{.*}} in round-trip: {{.*}}
+// CHECK-ROUND-TRIP-WITH-REMARKS: remark: generated arguments #{{.*}} in round-trip: {{.*}}
diff --git a/clang/test/OpenMP/target_messages.cpp b/clang/test/OpenMP/target_messages.cpp
index a40a7d03ac80d..80fdcdc958e38 100644
--- a/clang/test/OpenMP/target_messages.cpp
+++ b/clang/test/OpenMP/target_messages.cpp
@@ -8,12 +8,12 @@
// CHECK: error: OpenMP target is invalid: 'aaa-bbb-ccc-ddd'
// RUN: not %clang_cc1 -fopenmp -std=c++11 -triple nvptx64-nvidia-cuda -o - %s 2>&1 | FileCheck --check-prefix CHECK-UNSUPPORTED-HOST-TARGET %s
// RUN: not %clang_cc1 -fopenmp -std=c++11 -triple nvptx-nvidia-cuda -o - %s 2>&1 | FileCheck --check-prefix CHECK-UNSUPPORTED-HOST-TARGET %s
-// CHECK-UNSUPPORTED-HOST-TARGET: error: The target '{{nvptx64-nvidia-cuda|nvptx-nvidia-cuda}}' is not a supported OpenMP host target.
+// CHECK-UNSUPPORTED-HOST-TARGET: error: target '{{nvptx64-nvidia-cuda|nvptx-nvidia-cuda}}' is not a supported OpenMP host target
// RUN: not %clang_cc1 -fopenmp -std=c++11 -fopenmp-targets=hexagon-linux-gnu -o - %s 2>&1 | FileCheck --check-prefix CHECK-UNSUPPORTED-DEVICE-TARGET %s
// CHECK-UNSUPPORTED-DEVICE-TARGET: OpenMP target is invalid: 'hexagon-linux-gnu'
// RUN: not %clang_cc1 -fopenmp -x c++ -triple powerpc64le-unknown-unknown -fopenmp-targets=powerpc64le-ibm-linux-gnu -emit-llvm %s -fopenmp-is-device -fopenmp-host-ir-file-path 1111.bc -o - 2>&1 | FileCheck --check-prefix NO-HOST-BC %s
-// NO-HOST-BC: The provided host compiler IR file '1111.bc' is required to generate code for OpenMP target regions but cannot be found.
+// NO-HOST-BC: provided host compiler IR file '1111.bc' is required to generate code for OpenMP target regions but cannot be found
// RUN: %clang_cc1 -fopenmp -x c++ -triple powerpc64le-unknown-unknown -fopenmp-targets=powerpc64le-ibm-linux-gnu -emit-llvm-bc %s -o %t-ppc-host.bc -DREGION_HOST
// RUN: not %clang_cc1 -verify=expected,omp4 -fopenmp -fopenmp-version=45 -x c++ -triple powerpc64le-unknown-unknown -fopenmp-targets=powerpc64le-ibm-linux-gnu -emit-llvm %s -fopenmp-is-device -fopenmp-host-ir-file-path %t-ppc-host.bc -o - -DREGION_DEVICE 2>&1
More information about the cfe-commits
mailing list