[Mlir-commits] [mlir] Add a tutorial on mlir-opt (PR #96105)
Jeremy Kun
llvmlistbot at llvm.org
Sat Jul 27 08:36:58 PDT 2024
================
@@ -0,0 +1,276 @@
+# Using `mlir-opt`
+
+`mlir-opt` is a command-line entry point for running passes and lowerings on MLIR code.
+This tutorial will explain how to use `mlir-opt`, show some examples of its usage,
+and mention some useful tips for working with it.
+
+Prerequisites:
+
+- [Building MLIR from source](/getting_started/)
+- [MLIR Language Reference](/docs/LangRef/)
+
+[TOC]
+
+## `mlir-opt` basics
+
+The `mlir-opt` tool loads a textual IR or bytecode into an in-memory structure,
+and optionally executes a sequence of passes
+before serializing back the IR (textual form by default).
+It is intended as a testing and debugging utility.
+
+After building the MLIR project,
+the `mlir-opt` binary (located in `build/bin`)
+is the entry point for running passes and lowerings,
+as well as emitting debug and diagnostic data.
+
+Running `mlir-opt` with no flags will consume textual or bytecode IR
+from standard in, parse and run verifiers on it,
+and write the textual format back to standard out.
+This is a good way to test if an input MLIR is well-formed.
+
+`mlir-opt --help` shows a complete list of flags
+(there are nearly 1000).
+Each pass has its own flag,
+though it is recommended to use `--pass-pipeline`
+to run passes rather than bare flags.
+
+## Running a pass
+
+Next we run [`convert-to-llvm`](/docs/Passes/#-convert-to-llvm),
+which converts all supported dialects to the `llvm` dialect,
+on the following IR:
+
+```mlir
+// mlir/test/Examples/mlir-opt/ctlz.mlir
+func.func @main(%arg0: i32) -> i32 {
+ %0 = math.ctlz %arg0 : i32
+ func.return %0 : i32
+}
+```
+
+After building MLIR, and from the `llvm-project` base directory, run
+
+```bash
+build/bin/mlir-opt --pass-pipeline="builtin.module(convert-math-to-llvm)" mlir/test/Examples/mlir-opt/ctlz.mlir
+```
+
+which produces
+
+```mlir
+module {
+ func.func @main(%arg0: i32) -> i32 {
+ %0 = "llvm.intr.ctlz"(%arg0) <{is_zero_poison = false}> : (i32) -> i32
+ return %0 : i32
+ }
+}
+```
+
+Note that `llvm` here is MLIR's `llvm` dialect,
+which would still need to be processed through `mlir-translate`
+to generate LLVM-IR.
+
+## Running a pass with options
+
+Next we will show how to run a pass that takes configuration options.
+Consider the following IR containing loops with poor cache locality.
+
+```mlir
+// mlir/test/Examples/mlir-opt/loop_fusion.mlir
+func.func @producer_consumer_fusion(%arg0: memref<10xf32>, %arg1: memref<10xf32>) {
+ %0 = memref.alloc() : memref<10xf32>
+ %1 = memref.alloc() : memref<10xf32>
+ %cst = arith.constant 0.000000e+00 : f32
+ affine.for %arg2 = 0 to 10 {
+ affine.store %cst, %0[%arg2] : memref<10xf32>
+ affine.store %cst, %1[%arg2] : memref<10xf32>
+ }
+ affine.for %arg2 = 0 to 10 {
+ %2 = affine.load %0[%arg2] : memref<10xf32>
+ %3 = arith.addf %2, %2 : f32
+ affine.store %3, %arg0[%arg2] : memref<10xf32>
+ }
+ affine.for %arg2 = 0 to 10 {
+ %2 = affine.load %1[%arg2] : memref<10xf32>
+ %3 = arith.mulf %2, %2 : f32
+ affine.store %3, %arg1[%arg2] : memref<10xf32>
+ }
+ return
+}
+```
+
+Running this with the [`affine-loop-fusion`](/docs/Passes/#-affine-loop-fusion) pass
+produces a fused loop.
+
+```bash
+build/bin/mlir-opt --pass-pipeline="builtin.module(affine-loop-fusion)" mlir/test/Examples/mlir-opt/loop_fusion.mlir
+```
+
+```mlir
+module {
+ func.func @producer_consumer_fusion(%arg0: memref<10xf32>, %arg1: memref<10xf32>) {
+ %alloc = memref.alloc() : memref<1xf32>
+ %alloc_0 = memref.alloc() : memref<1xf32>
+ %cst = arith.constant 0.000000e+00 : f32
+ affine.for %arg2 = 0 to 10 {
+ affine.store %cst, %alloc[0] : memref<1xf32>
+ affine.store %cst, %alloc_0[0] : memref<1xf32>
+ %0 = affine.load %alloc_0[0] : memref<1xf32>
+ %1 = arith.mulf %0, %0 : f32
+ affine.store %1, %arg1[%arg2] : memref<10xf32>
+ %2 = affine.load %alloc[0] : memref<1xf32>
+ %3 = arith.addf %2, %2 : f32
+ affine.store %3, %arg0[%arg2] : memref<10xf32>
+ }
+ return
+ }
+}
+```
+
+This pass has options that allow the user to configure its behavior.
+For example, the `fusion-compute-tolerance` option
+is described as the "fractional increase in additional computation tolerated while fusing."
+If this value is set to zero on the command line,
+the pass will not fuse the loops.
+
+```bash
+build/bin/mlir-opt --pass-pipeline="builtin.module(affine-loop-fusion{fusion-compute-tolerance=0})" \
+mlir/test/Examples/mlir-opt/loop_fusion.mlir
+```
+
+```mlir
+module {
+ func.func @producer_consumer_fusion(%arg0: memref<10xf32>, %arg1: memref<10xf32>) {
+ %alloc = memref.alloc() : memref<10xf32>
+ %alloc_0 = memref.alloc() : memref<10xf32>
+ %cst = arith.constant 0.000000e+00 : f32
+ affine.for %arg2 = 0 to 10 {
+ affine.store %cst, %alloc[%arg2] : memref<10xf32>
+ affine.store %cst, %alloc_0[%arg2] : memref<10xf32>
+ }
+ affine.for %arg2 = 0 to 10 {
+ %0 = affine.load %alloc[%arg2] : memref<10xf32>
+ %1 = arith.addf %0, %0 : f32
+ affine.store %1, %arg0[%arg2] : memref<10xf32>
+ }
+ affine.for %arg2 = 0 to 10 {
+ %0 = affine.load %alloc_0[%arg2] : memref<10xf32>
+ %1 = arith.mulf %0, %0 : f32
+ affine.store %1, %arg1[%arg2] : memref<10xf32>
+ }
+ return
+ }
+}
+```
+
+Options passed to a pass
+are specified via the syntax `{option1=value1 option2=value2 ...}`,
+i.e., use space-separated `key=value` pairs for each option.
+
+## Building a pass pipeline on the command line
+
+The `--pass-pipeline` flag supports combining multiple passes into a pipeline.
+So far we have used the trivial pipeline with a single pass
+that is "anchored" on the `builtin.module` op.
+[Pass anchoring](/docs/PassManagement/#oppassmanager)
+is a way for passes to specify
+that they only run on particular ops.
+While many passes are anchored on `builtin.module`,
+if you try to run a pass that is anchored on some other op
+inside `--pass-pipeline="builtin.module(pass-name)"`,
+it will not run.
+
+Multiple passes can be chained together
+by providing the pass names in a comma-separated list
+in the `--pass-pipeline` string,
+e.g.,
+`--pass-pipeline="builtin.module(pass1,pass2)"`.
+The passes will be run sequentially.
+
+To use passes that have nontrivial anchoring,
+the appropriate level of nesting must be specified
+in the pass pipeline.
+For example, consider the following IR which has the same redundant code,
+but in two different levels of nesting.
+
+```mlir
+module {
+ module {
+ func.func @func1(%arg0: i32) -> i32 {
+ %0 = arith.addi %arg0, %arg0 : i32
+ %1 = arith.addi %arg0, %arg0 : i32
+ %2 = arith.addi %0, %1 : i32
+ func.return %2 : i32
+ }
+ }
+
+ gpu.module @gpu_module {
+ gpu.func @func2(%arg0: i32) -> i32 {
+ %0 = arith.addi %arg0, %arg0 : i32
+ %1 = arith.addi %arg0, %arg0 : i32
+ %2 = arith.addi %0, %1 : i32
+ gpu.return %2 : i32
+ }
+ }
+}
+```
+
+The following pipeline runs `cse` (common subexpression elimination)
+but only on the `func.func` inside the two `builtin.module` ops.
+
+```bash
+build/bin/mlir-opt mlir/test/Examples/mlir-opt/ctlz.mlir --pass-pipeline='
+ builtin.module(
+ builtin.module(
+ func.func(cse,canonicalize),
+ convert-to-llvm
+ )
+ )'
+```
+
+The output leaves the `gpu.module` alone
+
+```mlir
+module {
+ module {
+ llvm.func @func1(%arg0: i32) -> i32 {
+ %0 = llvm.add %arg0, %arg0 : i32
+ %1 = llvm.add %0, %0 : i32
+ llvm.return %1 : i32
+ }
+ }
+ gpu.module @gpu_module {
+ gpu.func @func2(%arg0: i32) -> i32 {
+ %0 = arith.addi %arg0, %arg0 : i32
+ %1 = arith.addi %arg0, %arg0 : i32
+ %2 = arith.addi %0, %1 : i32
+ gpu.return %2 : i32
+ }
+ }
+}
+```
+
+For a spec of the pass-pipeline textual description language,
+see [the docs](/docs/PassManagement/#textual-pass-pipeline-specification).
+For more general information on pass management, see [Pass Infrastructure](/docs/PassManagement/#).
+
+## Useful CLI flags
+
+- `--debug` prints all debug information produced by `LLVM_DEBUG` calls.
+- `--debug-only="my-tag"` prints only the debug information produced by `LLVM_DEBUG`
+ in files that have the macro `#define DEBUG_TYPE "my-tag"`.
+ This often allows you to print only debug information associated with a specific pass.
+ - `"greedy-rewriter"` only prints debug information
+ for patterns applied with the greedy rewriter engine.
+ - `"dialect-conversion"` only prints debug information
+ for the dialect conversion framework.
+ - `--emit-bytecode` emits MLIR in the bytecode format.
+ - `--mlir-pass-statistics` print statistics about the passes run.
+ These are generated via [pass statistics](/docs/PassManagement/#pass-statistics).
+ - `--mlir-print-ir-after-all` prints the IR after each pass.
----------------
j2kun wrote:
Done.
https://github.com/llvm/llvm-project/pull/96105
More information about the Mlir-commits
mailing list