[llvm-dev] [cfe-dev] RFC: Add an llvm::vfs::OutputManager to allow Clang to virtualize compiler outputs

Duncan P. N. Exon Smith via llvm-dev llvm-dev at lists.llvm.org
Wed Apr 28 15:01:50 PDT 2021 

Hi Sam:

> On 2021 Mar  15, at 14:18, Duncan P. N. Exon Smith via cfe-dev <cfe-dev at lists.llvm.org> wrote:
> 
> Thanks for the replies Sam! I've just back after being out for a bit; I'll try to give a substantive reply later this week.
> 

(Took longer than I'd intended / expected for me to circle back, but here I am.)

>> I may have missed it (apologies if so), but is there somewhere a breakdown of which performance-critical configurations this is aimed at?
>> (e.g. many small outputs that don't benefit from streaming, mirrored to two output streams, but one is null)
>> Performance is certainly going to cut against simplicity sometimes, but it's hard to evaluate without knowing what we're optimizing for.

The main use case for this optimization — and the trigger for most of the complexity in this proposal — is to support the module cache, both by
- using output backend as a new implementation strategy for InMemoryModuleCache/etc. and
- (optionally?) capturing just-written implicit modules in a client-defined output backend.
The specific optimization I wanted to enable was for the "normal" case where the client is "normal" compilation from `/usr/bin/clang`, and we're writing to disk. In that case, it seems optimal to:
- use something akin to llvm::FileOutputBuffer to efficiently write to disk (using mmap) and
- save that just-written file-backed memory buffer to FileManager / InMemoryModuleCache / vfs::InMemoryFileSystem / somewhere.

Having had some more time to reflect (and getting some experience building on top of this patch for some tangentially-related experiments), I'm leaning strongly toward *not* trying to solve the in-memory module cache as an inherent part of OutputBackend, and virtualizing the module cache separately from (or on top of) this abstraction.

At a high-level, here's what I'm planning to do:

1. Minimal OutputBackend with a slimmed down OutputFile class, and two implementations: OnDiskOutputBackend and NullOutputBackend.
- We can use this to discuss tradeoffs around OutputConfig (enum+bitset wrapper for named-based parameters vs. struct for full flexibility).
- Doesn't really need output directories: clients for now can be expected to provide absolute paths, or call `sys::fs::change_directory`.

2. OutputDirectory / CWD / etc.

3. InMemoryOutputBackend, which saves files to a vfs::InMemoryFileSystem
- Maybe can't quite land before OutputDirectory is worked out, but most of the review can happen in parallel.

4. Temp files and temp directories
- Adding shared infrastructure that InMemoryOutputBackend and other virtual backends can use.
- Enables threading more outputs through the outputbackend

5. Look more concretely at how best to virtualize the module cache using this.
- Or maybe this thinking will / should be front-loaded...

WDYT?

Thanks,
Duncan

>>> Only other thing is the scope of the patch - it's useful that as an RFC it's comprehensive and shows things fitting together.
> 
> Absolutely; agreed it needs to be split up for review.
> 
>> On 2021 Feb  22, at 06:11, Sam McCall <sammccall at google.com <mailto:sammccall at google.com>> wrote:
>> 
>> Sorry about the long delay!
>> 
>> This looks much better to me, thank you for the simplifications!
>> I've made a bunch of notes on the patch itself which I'll send now too. High-level things inline: TL;DR: stream/buffer confusion in outputfile, scope.
>> 
>> On Wed, Feb 10, 2021 at 3:12 AM Duncan P. N. Exon Smith <dexonsmith at apple.com <mailto:dexonsmith at apple.com>> wrote:
>> Sam, any thoughts here?
>> 
>>> On 2021 Feb  2, at 19:36, Duncan P. N. Exon Smith via llvm-dev <llvm-dev at lists.llvm.org <mailto:llvm-dev at lists.llvm.org>> wrote:
>>> 
>>> Update: I've incorporated much of Sam's feedback into the main patch (https://reviews.llvm.org/D95501 <https://reviews.llvm.org/D95501>).
>>> 
>>> - Simplify OutputConfig, restricting it to semantic information about a specific output. Sink all backend configuration to flags on the backends themselves.
>> 
>> The remaining options look great, and agree that we can't expect everything to be configured globally.
>>> - Remove OutputManager, instead exposing OutputBackend directly.
>> 
>> Hooray! 
>>> - Merge Output and OutputDestination into a single class called OutputFile, and rename the API for creating them to OutputBackend::createFile().
>>> - Add support for working directories via OutputDirectory, and add OutputBackend::getDirectory() and OutputBackend::createDirectory().
>>> - Add support for createUniqueFile() and createUniqueDirectory(), both heavily used in clang. Backends without read access can use StableUniqueEntityAdaptor to implement these.
>> 
>> This is definitely needed, but there are a few design options and I can't say I precisely understand either the requirements or the solution in the patch.
>> I think it would be useful to review this separately. 
>>> 
>>> The main thing not settled is the threading guarantees. Restating the straw man I proposed:
>>> 
>>> - All OutputBackend APIs are safe to call concurrently. Since OutputDirectory *is* an OutputBackend, it can be used concurrently as well.
>>> - An OutputFile cannot be used concurrently, but two files from the same backend can be.
>> 
>> LGTM 
>>> 
>>> Interested in everyone's thoughts on that; if that sounds reasonable I can update the patch to make it so.
>>> 
>>> Two other points:
>>> 
>>> - Sam proposed dropping OutputConfig. I don't think we can, as the API client needs to communicate semantic information about specific outputs, not about the backends generally.
>>> - Sam suggested OutputDestination (now OutputFile) seemed bloated. I talked through some of the details in my previous response; most of the complexity is there to make MirroringOutputBackend work efficiently and avoid duplication in subclasses. As a counterpoint, the only API a concrete subclass needs to override is storeContentBuffer().
>> 
>> Hmm, OutputFile still feels caught between two concepts: a buffer-based one and a stream based one.
>> I understand the goal to make this easy to implement and easy to use, but having a lot of conceptual distance between the two, and optional methods/implementation strategies is easy to misunderstand.
>> 
>> I may have missed it (apologies if so), but is there somewhere a breakdown of which performance-critical configurations this is aimed at?
>> (e.g. many small outputs that don't benefit from streaming, mirrored to two output streams, but one is null)
>> Performance is certainly going to cut against simplicity sometimes, but it's hard to evaluate without knowing what we're optimizing for.
>> 
>>  > MirroringOutputBackend work efficiently
>> One thing I don't understand about MirroringOutputBackend - why does it buffer the content? It seems possible to create a raw_pwrite_stream that broadcasts to raw_pwrite_streams of the underlying outputs.
>>> 
>>> Sam, let please take another look and let me know if you have more high-level comments.
>> 
>> Only other thing is the scope of the patch - it's useful that as an RFC it's comprehensive and shows things fitting together.
>> But the amount of detail is a bit overwhelming :-)
>> I think the parts regarding directories, unique files, mirroring/filtering backends, many of the output options would be easier to review in detail in isolated patches.
>>  
>>> Others, if you have feedback, please let me know!
>>> 
>>> Thanks!
>>> Duncan
>>> 
>>>> On 2021 Jan  28, at 11:24, Duncan P. N. Exon Smith via llvm-dev <llvm-dev at lists.llvm.org <mailto:llvm-dev at lists.llvm.org>> wrote:
>>>> 
>>>> Thanks for the detailed response Sam!
>>>> 
>>>>> This roughly corresponds to OutputBackend + OutputDestination in the patch, except:
>>>>>  - the OutputConfig seems like it belongs to particular backends, not the overall backend abstraction
>>>> 
>>>> Ideally the OnDiskOutputConfig would almost entirely be settings on OnDiskOutputBackend since no one else will care. It isn't that way in the initial patch because Clang decides most of this stuff on a per-output basis. Maybe there's a refactoring that could fix it.
>>>> 
>>>> Here are the problems I hit that led to this design:
>>>> 
>>>> 1. Some properties need to be associated with specific outputs, not backends, because they relate to properties of the outputs themselves. Here are two:
>>>> - ClientIntentOutputConfig::NeedsSeeking
>>>> - OnDiskOutputConfig::OpenFlagText
>>>> 
>>>> Maybe also something like:
>>>> - OnDiskOutputConfig::CreateDirectories
>>>> (and maybe others)
>>>> 
>>>> I couldn't think of a good way to solve this besides passing in configuration at output creation time.
>>>> 
>>>> 2. Some "configurers" may be handed a pre-constructed opaque OutputManager / OutputBackend and need to configure internal OnDiskOutputBackend. In particular, I found that some tooling wants to turn off:
>>>> - OnDiskOutputConfig::RemoveFileOnSignal
>>>> (others flags might benefit)
>>>> 
>>>> This is "documented" by the call chains of clang::CompilerInstance::createOutputFile.
>>>> 
>>>> I reused the solution from #1 since it needed (?) to exist anyway. Another option would be to add an OutputBackend visitor, to find and reconfigure any "contained" OnDiskOutputBackend. This seems pretty heavyweight though.
>>>> 
>>>>>  - OutputDestination has a lot of stuff in it, I'll need to dig further into the patch to try to understand why
>>>> 
>>>> Firstly, `Output` has the user-facing abstraction. `OutputDestination` has low-level bits. Another reasonable name might be `OutputImpl` but `OutputDescription` seemed more descriptive.
>>>> 
>>>> Secondly, most of the low-level bits avoid unnecessary copies of content buffers. Maybe there are simpler ideas for how to do this, but here are the design goals I was working around:
>>>> - Avoid buffering content unless necessary.
>>>> - Avoid duplicating content buffers unless necessary.
>>>> - Support multiple destinations (for mirrored backends) without breaking the above rules. The obvious "interesting" case is in-memory + on-disk (in either order).
>>>> - Make sub-classes of `OutputDestination` as small as possible given the above.
>>>> 
>>>> Thirdly, there's some boilerplate related to lifetimes of multiple destinations. Probably having an explicit `MirroringOutputDestination` would be better.
>>>> 
>>>>> As for OutputManager itself, I think this belongs in clang, if it's needed. Its main job seems to be to store a set of default options and manage the lifecycle of backends, and it's not obvious that those sorts of concerns will generalize across tools or that there's much to be gained from sharing code here.
>>>> 
>>>> In the end, its main job is to wrap an OutputDestination (low-level abstraction) in an Output (high-level abstraction). Output does a bunch of work for OutputDestination, such as manage the intermediate content buffer.
>>>> 
>>>> Probably it's better to have the OutputBackend return an Output directly (and get rid of the OutputManager).
>>>> 
>>>> (At one point OutputManager was managing multiple backends directly and was involved in the store operation(s); but since I factored that logic out to MirroringOutputBackend and OutputDestination it probably doesn't need to exist.)
>>>> 
>>>>> - Any other major concerns / suggestions?
>>>>> Thread-safety of the core plug-in interface is something that would be nice to explicitly address, as this has been a pain-point with vfs::FileSystem.
>>>>> It's tempting to say "not threadsafe, you should lock", but this results in throwing an unnecessary global lock around all FS accesses in multithreaded programs, in the common case that the real FS is being used.
>>>> 
>>>> Right, I hit multi-threading limitations myself when prototyping a follow-up patch (didn't get around to posting it until this AM):
>>>> https://reviews.llvm.org/D95628 <https://reviews.llvm.org/D95628>
>>>> 
>>>> My intuition is:
>>>> 
>>>> Thread-safe:
>>>> - OutputBackend::createDestination
>>>> - Concurrently touching more than one Output/OutputDestination
>>>> 
>>>> Thread-unsafe:
>>>> - Using a single Output/OutputDestination concurrently
>>>> 
>>>> This all seems cheap and easy to maintain because of the limited interface. The problem I hit in the above patch is that for the InMemoryOutputBackend you also need any readers of the InMemoryFileSystem to be thread-safe.
>>>> 
>>>> Relatedly, https://reviews.llvm.org/D95583 <https://reviews.llvm.org/D95583> (a prep patch for the above) allows the llvm::LockManager to be skipped. This is not really about outputs — it's inter-process coordination to avoid doing redundant work in competing Clang command-line invocations (at one point it was needed for correctness, but the main benefit now is to avoid taxing the on-disk filesystem) — but it does touch on the idea of exclusive write access.
>>>> 
>>>>> Relatedly, working-directory/relative-path handling should be considered.
>>>> 
>>>> Yeah, you're probably right. Any specific thoughts on what to do here? It seems like llvm::vfs::FileSystem gets them pretty wrong for Windows; see (e.g.) the discussion at the end of https://reviews.llvm.org/D70701 <https://reviews.llvm.org/D70701>.
>>>> 
>>>> Even for POSIX, working directories could complicate concurrency guarantees. A simple solution is to not have an API for changing working directories, and instead model that by creating a proxy backend (ChangeDirectoryOutputBackend) that prepends the (new) working directory to new outputs; since each backend has an immutable view of the CWD concurrent access should be fine.
>>>> 
>>>> Two other thoughts related to paths:
>>>> 
>>>> 1. I wonder if this abstraction treats the "path" as too central a property of the output. Can this evolve to allow a compiler to build a directory structure bottom-up without having to know the destination a priori? (E.g., an inner layer makes a blob, a middle layer makes a tree out of a few of those, and an outer layer decides where to put the tree.)
>>>> 
>>>> I think it can. One approach is to use proxy backends:
>>>> - Inner layer writes to '-' / stdout. (Why not pass a pre-constructed Output/raw_pwrite_stream? See note below.)
>>>> - Middle layer passes the instances of the inner layer a proxy backend that maps stdout to the various blob names. (E.g., `/name1` and `/name2`.)
>>>> - Outer layer passes the middle layer a proxy backend that "does the right thing" with the tree. (E.g., writes to `/Users/dexonsmith/name{1,2}`.)
>>>> 
>>>> => If writing on-disk, "the right thing" is to prepend the correct output directory for the tree and pass each file to a regular OnDiskOutputBackend.
>>>> => If writing to (e.g.) Git's CAS, "the right thing" is to call git-hash-object on Output::close and track the name-to-hash mapping as outputs come in, and then call "git-mktree" when the middle layer is "done" (maybe a callback in the backend-passed-to-the-middle-layer's destructor).
>>>> 
>>>> (IOW, a refactoring where instead of passing absolute paths / directories / filenames down through all the layers, proxy output backends build up the path/destination piece-by-piece.)
>>>> 
>>>> I think it's doable with the abstraction as-proposed. But let me know if anyone has concerns. For example:
>>>> - Is `Output::getPath()` an abstraction leak?
>>>> - Should we have a `createOutput` that doesn't take a path?
>>>> - ...
>>>> 
>>>> Why not pass a pre-constructed Output/raw_pwrite_stream to the inner layer?
>>>> - The inner layer needs an output backend if it (sometimes) dumps "side" files (such as AST record layouts into ".ast-dump" or textual IR into ".ll"). This avoids needing to know the on-disk file path ("/path/to/output" => "/path/to/output.ll"), or to even know whether there's a disk.
>>>> 
>>>> 2. How should we virtualize stdout / stderr?
>>>> - "'-' means stdout" is probably good enough since LLVM makes that assumption all over. Unless someone disagrees?
>>>> - I'm not sure what to do with stderr. No one ever "closes" this stream.
>>>> - Are there other outputs that don't have path names?
>>>> 
>>>> 3. Do we need to virtualize llvm::sys::fs::create_directories?
>>>> - If so, why?
>>>> 
>>>>> (And a question/concern about the relationship between input and output virtualization, elaborated at the bottom)
>>>> 
>>>>> Why doesn't this inherit from llvm::vfs::FileSystem?
>>>>> Separating the input and output abstractions seems a bit cleaner. It's easy enough to join them, when useful: e.g., write to an `InMemoryFileSystem` (via an `InMemoryOutputBackend`) and install this same FS in the `FileManager` (maybe indirectly via an `OverlayFileSystem`).
>>>>> I agree with separating the interfaces. In hosted environments your input VFS is often read-only and outputs go somewhere else. 
>>>>> 
>>>>> But I wonder, is there an implicit assumption that data written to OutputManager is readable via the (purportedly independent) vfs::FileSystem? This seems like a helpful assumption for module caching, but is extremely constraining and eliminates many of the simplest and most interesting possibilities.
>>>>> 
>>>>> If you're going to require the FileSystem and OutputBackend to be linked, then I think they *should* be the same object.
>>>> 
>>>> No, I don't think that should be a requirement / expectation. It's a specific requirement for Clang's implicitly built modules, and I think Clang should be responsible for hooking them together when necessary.
>>>> 
>>>>> But if it's mostly module caching that requires that, then it seems simpler and less invasive to virtualize module caching directly (put(module, key) + get(key)) rather than file access.
>>>> 
>>>> Agreed, explicitly virtualizing module caching might be a good thing to do. Either way this is Clang's job to coordinate; I just think the output manager should efficiently support mirroring outputs to an additional/custom backend that Clang installs.
>>>> 
>>>> Note: implicit modules doesn't currently rely on reading the modules it has just built from disk. It uses InMemoryModuleCache to avoid having to read anything it has written to disk and to ensure consistency between CompilerInstances across an implicit build. It's pretty awkward though.
>>>> 
>>>>> On 2021 Jan  28, at 03:19, Sam McCall <sammccall at google.com <mailto:sammccall at google.com>> wrote:
>>>>> 
>>>>> Really glad to see this work, virtualizing module cache is something we've wanted to experiment with for tooling, but never got to. I want to get into the patches in more detail, but some high-level thoughts...
>>>>> 
>>>>> On Wed, Jan 27, 2021 at 6:23 AM Duncan P. N. Exon Smith via cfe-dev <cfe-dev at lists.llvm.org <mailto:cfe-dev at lists.llvm.org>> wrote:
>>>>> TL;DR: Let's virtualize compiler outputs in Clang. These patches would get us started:
>>>>> - https://reviews.llvm.org/D95501 <https://reviews.llvm.org/D95501> Add llvm::vfs::OutputManager
>>>>> - https://reviews.llvm.org/D95502 <https://reviews.llvm.org/D95502> Initial adoption of llvm::vfs::OutputManager in Clang.
>>>>> 
>>>>> Questions for the reader
>>>>> - Should we virtualize compiler outputs in Clang? (Hint: yes.)
>>>>> Definitely agree.
>>>>>  
>>>>> 	- Does this support belong in LLVM? (I think it does, so that non-Clang tools can easily reuse it.)
>>>>> Ideally, the core abstraction (path -> pwrite_stream) certainly belongs in LLVM, as well as the most common implementations of it.
>>>>> Based on experience with VirtualFileSystem, I'd like this interface to be as narrow as possible to make it feasible to implement/wrap correctly, and to reason about how the wider system interacts with it.
>>>>> 
>>>>> This roughly corresponds to OutputBackend + OutputDestination in the patch, except:
>>>>>  - the OutputConfig seems like it belongs to particular backends, not the overall backend abstraction
>>>>>  - OutputDestination has a lot of stuff in it, I'll need to dig further into the patch to try to understand why
>>>>> 
>>>>> As for OutputManager itself, I think this belongs in clang, if it's needed. Its main job seems to be to store a set of default options and manage the lifecycle of backends, and it's not obvious that those sorts of concerns will generalize across tools or that there's much to be gained from sharing code here.
>>>>>  
>>>>> 	- Is `llvm::vfs::` a reasonable namespace? (If not, suggestions? I think `llvm::` itself is too broad.)
>>>>> llvm::vfs:: is definitely the right namespace for the core writing stuff IMO.
>>>>> If more ancillary bits (parts some but not all tools might use) need to go in llvm, llvm:: seems to be the best namespace we have (like e.g. SourceMgr) but maybe we should add a new one. But as mentioned, I'd prefer those to live in clang:: at least for now.
>>>>>  
>>>>> - Do you have a use case that this won't address well?
>>>>> 	- Should that be fixed in the initial patch, or could this be evolved in-tree to address that?
>>>>> - Any other major concerns / suggestions?
>>>>> Thread-safety of the core plug-in interface is something that would be nice to explicitly address, as this has been a pain-point with vfs::FileSystem.
>>>>> It's tempting to say "not threadsafe, you should lock", but this results in throwing an unnecessary global lock around all FS accesses in multithreaded programs, in the common case that the real FS is being used.
>>>>> 
>>>>> Relatedly, working-directory/relative-path handling should be considered.
>>>>> 
>>>>> (And a question/concern about the relationship between input and output virtualization, elaborated at the bottom)
>>>>>  
>>>>> - If you think the above patches should be split up for initial review / commit, how?
>>>>> Obviously my favorite would be to see a minimal core writable VFS interface extracted and land that first. What's built on top of it is less critical, and I'm not concerned about it landing in larger chunks.
>>>>>  
>>>>> 
>>>>> (Other feedback welcome too!)
>>>>> 
>>>>> Longer version
>>>>> There are a number of use cases for capturing compiler outputs, which I'm hoping this proposal is a step toward addressing.
>>>>> 
>>>>> - Tooling wants to capture outputs directly, without going through the filesystem.
>>>>> 	- Sometimes, tertiary outputs can be ignored, or still need to be written to disk.
>>>>> - clang-scan-deps is using a form of stripped down "implicit" modules to determine which modules need to be built explicitly. It doesn't really want to be using the on-disk module cache—in-memory would be better.
>>>>> - clang's ModuleManager manually maintains an in-memory modules cache for implicit modules. This involves copying the PCM outputs into memory. It'd be better for these modules to be file-backed, instead of copies of the stream.
>>>>> 
>>>>> The patch has a bunch of details written / tested (https://reviews.llvm.org/D95501 <https://reviews.llvm.org/D95501>). Here are the high-level structures in the design:
>>>>> 
>>>>> - OutputManager—a shared manager for creating outputs without knowing about the storage.
>>>>> - OutputConfig—configuration set on the OutputManager that can be (partially) overridden for specific outputs.
>>>>> - Output—opaque object with a raw_pwrite_stream, output path, and `erase`/`close` functionality. Internally, it has a linked list of output destinations.
>>>>> - OutputBackend—abstract interface installed in an OutputManager to create the "guts" of an output. While an OutputManager only has one installed, these can be layered / forked / mirrored.
>>>>> - OutputDestination—abstract interface paired with an OutputBackend, whose lifetime is managed by an Output.
>>>>> - ContentBuffer—actual content to allow efficient use of data by multiple backends. For example, the installed backend is a mirror between an on-disk and in-memory backend, the in-memory backend will either get the content moved directly into an llvm::MemoryBuffer, or a just-written mmap'ed file.
>>>>> 
>>>>> The patch includes a few backends:
>>>>> 
>>>>> - NullOutputBackend, for ignoring all backends.
>>>>> - OnDiskOutputBackend, for writing to disk (the default), initially based on the logic in `clang::CompilerInstance`.
>>>>> - InMemoryOutputBackend, for writing to an `InMemoryFileSystem`.
>>>>> - MirroringOutputBackend, for writing to multiple backends. OutputDestination's API is designed around supporting this.
>>>>> - FilteringOutputBackend, for filtering which outputs get written to the underlying backend.
>>>>> 
>>>>> Why doesn't this inherit from llvm::vfs::FileSystem?
>>>>> Separating the input and output abstractions seems a bit cleaner. It's easy enough to join them, when useful: e.g., write to an `InMemoryFileSystem` (via an `InMemoryOutputBackend`) and install this same FS in the `FileManager` (maybe indirectly via an `OverlayFileSystem`).
>>>>> I agree with separating the interfaces. In hosted environments your input VFS is often read-only and outputs go somewhere else. 
>>>>> 
>>>>> But I wonder, is there an implicit assumption that data written to OutputManager is readable via the (purportedly independent) vfs::FileSystem? This seems like a helpful assumption for module caching, but is extremely constraining and eliminates many of the simplest and most interesting possibilities.
>>>>> 
>>>>> If you're going to require the FileSystem and OutputBackend to be linked, then I think they *should* be the same object.
>>>>> But if it's mostly module caching that requires that, then it seems simpler and less invasive to virtualize module caching directly (put(module, key) + get(key)) rather than file access.
>>>>> 
>>>>> Other work in the area
>>>>> See also: https://reviews.llvm.org/D78058 <https://reviews.llvm.org/D78058> (thanks to Marc Rasi for posting that patch, and to Sam McCall for some feedback on an earlier version of this proposal).
>>>>> 
>>>>> Thanks for reading!
>>>>> Duncan
>>>>> _______________________________________________
>>>>> cfe-dev mailing list
>>>>> cfe-dev at lists.llvm.org <mailto:cfe-dev at lists.llvm.org>
>>>>> https://lists.llvm.org/cgi-bin/mailman/listinfo/cfe-dev <https://lists.llvm.org/cgi-bin/mailman/listinfo/cfe-dev>
>>>> _______________________________________________
>>>> LLVM Developers mailing list
>>>> llvm-dev at lists.llvm.org <mailto:llvm-dev at lists.llvm.org>
>>>> https://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev <https://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev>
>>> 
>>> _______________________________________________
>>> LLVM Developers mailing list
>>> llvm-dev at lists.llvm.org <mailto:llvm-dev at lists.llvm.org>
>>> https://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev <https://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev>
> 
> _______________________________________________
> cfe-dev mailing list
> cfe-dev at lists.llvm.org
> https://lists.llvm.org/cgi-bin/mailman/listinfo/cfe-dev

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.llvm.org/pipermail/llvm-dev/attachments/20210428/f3fd8108/attachment.html>

More information about the llvm-dev mailing list