[llvm-dev] Loop-vectorizer prototype for the EPI Project based on the RISC-V Vector Extension (Scalable vectors)

Thu Nov 5 01:32:19 PST 2020

Hi Sjoerd,

thanks for pointing us to this intrinsic.

I see it returns a mask/predicate type. My understanding is that VPred
intrinsics have both a vector length operand and a mask operand. It looks
to me that a "popcount" of get.active.lane.mask would correspond to the
vector length operand. Then additional "control flow" mask of predicated
code would correspond to the mask operand.

My intepretation was that get.active.lane.mask allowed targets that do not
have a concept of vector length (such as SVE or MVE) to represent it as a
mask. For those targets, the vector length operand can be given a value
that means "use the whole register" and then only the mask operand is
relevant to them.

But maybe my interpretation is wrong.

@Simon: what is VE going to do here?

Kind regards,

Missatge de Sjoerd Meijer via llvm-dev <llvm-dev at lists.llvm.org> del dia
dj., 5 de nov. 2020 a les 10:00:

> Fold the epilog loop into the vector body.
>
>    - This is done by setting the vector length in each iteration. This
>    induces a predicate/mask over all the vector instructions of the loop (any
>    other predicates/masks in the vector body are needed for control flow).
>
> That's what we do for Arm MVE using intrinsic get.active.lane.mask (*)
> which is emitted in the vectoriser. It generates a predicate that is used
> by the masked loads/stores. That's the current state of the art, long term
> that should indeed be using the VP intrinsics. Just wanted to point you at
> get.active.lane.mask, because it would also be nice to get confirmation
> that this not only works for fixed vectors but also scalable vectors, which
> I think should be the case...
>
> (*)
> https://llvm.org/docs/LangRef.html#llvm-get-active-lane-mask-intrinsics
>
> Cheers,
> Sjoerd.
> ------------------------------
> *From:* llvm-dev <llvm-dev-bounces at lists.llvm.org> on behalf of Vineet
> Kumar via llvm-dev <llvm-dev at lists.llvm.org>
> *Sent:* 05 November 2020 01:36
> *To:* Renato Golin <rengolin at gmail.com>
> *Cc:* LLVM Dev <llvm-dev at lists.llvm.org>; ROGER FERRER IBANEZ <
> roger.ferrer at bsc.es>; Arai, Masaki <arai.masaki at jp.fujitsu.com>
> *Subject:* Re: [llvm-dev] Loop-vectorizer prototype for the EPI Project
> based on the RISC-V Vector Extension (Scalable vectors)
>
>
> Hi Renato,
>
> Thanks a lot for your comments!
>
> (more inline.)
>
>
> Thanks and Regards,
>
> Vineet
>
>
> On 2020-11-02 5:43 p.m., Renato Golin wrote:
>
> Hi Vineet,
>
> Thanks for sharing! I haven't looked at the code yet, just read the README
> file you have and it has already answered a lot of questions that I
> initially had. Some general comments...
>
> I'm very happy to see that Simon's predication changes were useful to your
> work. It's a nice validation of their work and hopefully will help SVE, too.
>
> Simon's vector predication ideas fit really nicely with our approach to
> predicated vectorization, specially the support for EVL parameter. We look
> forward to more discussions around it.
>
>
> Your main approach to strip-mine + fuse tail loop is what I was going to
> propose for now. It matches well with the bite-sized approach VPlan has and
> could build on existing vector formats. For example, you always try to
> strip-mine (for scalable and non-scalable) and then only for scalable, you
> try to fuse the scalar loops, which would improve the solution and give
> RVV/SVVE an edge over the other extensions on the same hardware.
>
> While our implemented approach with tail folding and predication is guided
> by the research interests of the EPI project, I agree that for a more
> general implementation your proposed approach for now makes more sense
> before moving on to better predication support and exploring other
> approaches.
>
>
> There were also in the past proposals to vectorise the tail loop,
> which could be a similar step. For example, in case the main vector body is
> 8-way or 16-way, the tail loop would be 7-way or 15-way, which is horribly
> inefficient. The idea was to further vectorise the 7-way as 4+2+1 ways,
> same for 15. If those loops are then unrolled, you end up with a nice
> decaling down pattern. On scalable vectors, this becomes a noop.
>
> There is a separate thread for vectorisation cost model [1] which talks
> about some of the challenges there, I think we need to include scalable
> vectors in consideration when thinking about it.
>
> Agreed. It would be very useful to think about a scalable vectors aware
> cost-model right from the beginning now that there is effort already
> underway to integrate it into VPlan. There was also a discussion around it
> in the latest SVE/SVE2 sync-up meeting and I think almost everyone was in
> agreement.
>
>
> The NEON vs RISCV register shadowing is interesting. It is true we mostly
> ignored 64-bit vectors in the vectoriser, but LLVM can still generate them
> with the (SLP) region vectoriser. IIRC, support for that kind of aliasing
> is not trivial (and why GCC's description of NEON registers sucked for so
> long), but the motivation of register pressure inside hot loops is indeed
> important. I'm adding Arai Masaki in CC as this is something he was working
> on.
>
> Thanks for adding Arai! I will be happy to pick their brain on the the
> topic.
>
> One specific place where we have to deal with it is when computing a
> feasible max VF. I am currently experimenting with an approach to have user
> specify (via a command line flag) a vector register width multiplier - a
> factor by which the operating vector register width would be the multiple
> of the minimum vector register width and then based on that, estimate the
> highest VF that won't spill registers (relies on TTI for information about
> the number of registers in relation to register width). This is definitely
> not a generic solution and probably not elegant either but personally it
> serves as a starting point to think about the broader issue.
>
>
> Otherwise, I think working with the current folks on VPlan and scalable
> extensions will be a good way to upstreaming all the ideas you guys had in
> your work.
>
> That's the plan!
>
>
> Thanks!
> --renato
>
> [1] http://lists.llvm.org/pipermail/llvm-dev/2020-October/146236.html
>
>
>
> On Mon, 2 Nov 2020 at 15:52, Vineet Kumar via llvm-dev <
> llvm-dev at lists.llvm.org> wrote:
>
> Hi all,
>
> At the Barcelona Supercomputing Center, we have been working on an
> end-to-end vectorizer using scalable vectors for RISC-V Vector extension in
> context of the EPI Project
> <https://www.european-processor-initiative.eu/accelerator/>. We earlier
> shared a demo of our prototype implementation  (
> https://repo.hca.bsc.es/epic/z/9eYRIF, see below) with the folks involved
> with LLVM SVE/SVE2 development. Since there was an interest in looking at
> the source code during the discussions in the subsequent LLVM SVE/SVE2
> sync-up meetings, we are also publishing a public copy of our repository.
>
> It is available at https://repo.hca.bsc.es/gitlab/rferrer/llvm-epi and
> will sync with our ongoing development on a weekly basis. Note that this is
> very much a work in progress and the code in this repository is only for
> reference purpose. Please see the README
> <https://repo.hca.bsc.es/gitlab/rferrer/llvm-epi/-/blob/EPI/README.md>
> file in the repo for details on our approach, design decisions, and
> limitations.
>
> We welcome any questions and feedback.
>
> Thanks and Regards,
> Vineet Kumar - vineet.kumar at bsc.es
> Barcelona Supercomputing Center - Centro Nacional de Supercomputación
>
>
>
> On 2020-07-29 3:10 a.m., Vineet Kumar wrote:
>
> Hi all,
>
> Following up on the discussion in the last meeting about auto-
> vectorization for RISC-V Vector extension (scalable vectors) at the
> Barcelona Supercomputing Center, here are some additional details.
>
> We have a working prototype for end-to-end compilation targeting the
> RISC-V Vector extension. The auto-vectorizer supports two strategies to
> generate LLVM IR using scalable vectors:
>
> 1) Generate a vector loop using VF (vscale x k) = whole vector register
> width, followed by a scalar tail loop.
>
> 2) Generate only a vector loop with active vector length controlled by
> the RISC-V `vsetvli` instruction and using Vector Predicated intrinsics
> (https://reviews.llvm.org/D57504). (Of course, intrinsics come with
> their own limitations but we feel it serves as a good proof of concept
> for our use case.) We also extend the VPlan to generate VPInstructions
> that are expanded using predicated intrinsics.
>
> We also considered a third hybrid approach of having a vector loop with
> VF = whole register width, followed by a vector tail loop using
> predicated intrinsics. For now though, based on project requirements,
> we favoured the second approach.
>
> We have also taken care to not break any fixed-vector implementation.
> All the scalable vector IR gen is guarded by conditions set by TTI.
>
> For shuffles, the most used case is broadcast which is supported by the
> current semantics of `shufflevector` instruction. For other cases like
> reverse, concat, etc., we have defined our own intrinsics.
>
> Current limitaitons:
> The cost model for scalable vectors doesn't do much other than always
> decideing to vectorize with VF based on TargetWidestType/SmallestType.
> We also do not support interleaving yet.
>
> Demo:
> The current implementation is very much in alpha and eventually, once
> it's more polished and thoroughly verified, we will put out patches on
> Phabricator. Till then, we have set up a Compiler Explorer server
> against our development branch to showcase the generated code.
>
> You can see and experiment with the generated LLVM IR and VPlan for a
> set of examples, with predicated vector loop (`-mprefer-predicate-over-
> epilog`) at https://repo.hca.bsc.es/epic/z/JB4ZoJ
> and with a scalar epilog (`-mno-prefer-predicate-over-epilog`) at https://repo.hca.bsc.es/epic/z/0WoDGt.
> Note that you can remove the `-emit-llvm` option to see the generated
> RISC-V assembly.
>
> We welcome any questions and feedback.
>
> Thanks and Regards,
> Vineet Kumar - vineet.kumar at bsc.es
> Barcelona Supercomputing Center - Centro Nacional de Supercomputación
>
>
>
>
>
> WARNING / LEGAL TEXT: This message is intended only for the use of the
> individual or entity to which it is addressed and may contain information
> which is privileged, confidential, proprietary, or exempt from disclosure
> under applicable law. If you are not the intended recipient or the person
> responsible for delivering the message to the intended recipient, you are
> strictly prohibited from disclosing, distributing, copying, or in any way
> using this message. If you have received this communication in error,
> please notify the sender and destroy and delete any copies you may have
> received.
>
> http://www.bsc.es/disclaimer
> _______________________________________________
> LLVM Developers mailing list
> llvm-dev at lists.llvm.org
> https://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev
>
>
>
> WARNING / LEGAL TEXT: This message is intended only for the use of the
> individual or entity to which it is addressed and may contain information
> which is privileged, confidential, proprietary, or exempt from disclosure
> under applicable law. If you are not the intended recipient or the person
> responsible for delivering the message to the intended recipient, you are
> strictly prohibited from disclosing, distributing, copying, or in any way
> using this message. If you have received this communication in error,
> please notify the sender and destroy and delete any copies you may have
> received.
>
> http://www.bsc.es/disclaimer
> _______________________________________________
> LLVM Developers mailing list
> llvm-dev at lists.llvm.org
> https://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev
>

-- 
Roger Ferrer Ibáñez
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.llvm.org/pipermail/llvm-dev/attachments/20201105/6666baf9/attachment.html>