[llvm-dev] LV: predication

Wed May 20 12:39:54 PDT 2020

I realize this discussion and D79100 have progressed, sorry, but could we revisit the "simplest path" of deriving the desired number?

> This is what we are currently doing and works excellent for simpler cases. For the more complicated cases that we now what to handle as well, the pattern matching just becomes a bit too horrible, and it is fragile too.

Could you elaborate on these more complicated cases and the difficulty they entail? Presumably a vector compare of a "Vector Induction Variable" with a broadcasted invariant value is sought, to be RAUW'd by a hardware configured mask. Is it the recognition of VIV's that's becoming horrible and fragile? It may be generally useful to have a robust utility and/or analysis that identifies such VIV, effectively extending SCEV to reason about vector values, rather than complicating any backend pass. Middle-end passes may find this information useful too, operating after LV, or on vector IR produced elsewhere.

This is somewhat analogous to the argument about relying on a canonical induction variable versus employing SCEV to derive it,  http://lists.llvm.org/pipermail/llvm-dev/2020-April/140572.html.

A dedicated intrinsic that freezes the compare instruction, for no apparent reason, may potentially cripple subsequent passes from further optimizing the vectorized loop.

From: llvm-dev <llvm-dev-bounces at lists.llvm.org> On Behalf Of Sjoerd Meijer via llvm-dev
Sent: Friday, May 01, 2020 21:54
To: Eli Friedman <efriedma at quicinc.com>; llvm-dev <llvm-dev at lists.llvm.org>
Subject: Re: [llvm-dev] LV: predication

Hi Eli,

> The problem with your proposal, as written, is that the vectorizer is producing the intrinsic.  Because we don't impose any ordering on optimizations before codegen, every optimization pass in LLVM would have to be taught to preserve any @llvm.set.loop.elements.i32 whenever it makes any change.  This is completely impractical because the intrinsic isn't related to anything optimizations would normally look for: it's a random intrinsic in the middle of nowhere.

I do see that point. But is that also not the beauty of it? It just sits in the preheader, if gets removed, then so be it. And if it not recognised, then also no harm done?

> Probably the simplest path to get this working is to derive the number of elements in the backend (in HardwareLoops, or your tail predication pass). You should be able to figure it from the masks used in the llvm.masked.load/store instructions in the loop.

This is what we are currently doing and works excellent for simpler cases. For the more complicated cases that we now what to handle as well, the pattern matching just becomes a bit too horrible, and it is fragile too. All we need is the information that the vectoriser already has, and pass this on somehow.

As I am really keen to simply our backend pass, would there be another way to pass this information on? If emitting an intrinsic is a blocker, could this be done with a loop annotation?

Cheers,
Sjoerd.
________________________________
From: Eli Friedman <efriedma at quicinc.com<mailto:efriedma at quicinc.com>>
Sent: 01 May 2020 19:30
To: Sjoerd Meijer <Sjoerd.Meijer at arm.com<mailto:Sjoerd.Meijer at arm.com>>; llvm-dev <llvm-dev at lists.llvm.org<mailto:llvm-dev at lists.llvm.org>>
Subject: RE: [llvm-dev] LV: predication

The problem with your proposal, as written, is that the vectorizer is producing the intrinsic.  Because we don't impose any ordering on optimizations before codegen, every optimization pass in LLVM would have to be taught to preserve any @llvm.set.loop.elements.i32 whenever it makes any change.  This is completely impractical because the intrinsic isn't related to anything optimizations would normally look for: it's a random intrinsic in the middle of nowhere.

Probably the simplest path to get this working is to derive the number of elements in the backend (in HardwareLoops, or your tail predication pass). You should be able to figure it from the masks used in the llvm.masked.load/store instructions in the loop.

-Eli

From: llvm-dev <llvm-dev-bounces at lists.llvm.org<mailto:llvm-dev-bounces at lists.llvm.org>> On Behalf Of Sjoerd Meijer via llvm-dev
Sent: Friday, May 1, 2020 3:50 AM
To: llvm-dev at lists.llvm.org<mailto:llvm-dev at lists.llvm.org>
Subject: [EXT] [llvm-dev] LV: predication

Hello,

We are working on predication for our vector extension (MVE). Since quite a few people are working on predication and different forms of it (e.g. SVE, RISC-V, NEC), I thought I would share what we would like to add to the loop vectoriser. Hopefully it's just a minor one and not intrusive, but could be interesting and useful for others, and feedback on this is welcome of course.

TL;DR:

We would like the loop vectoriser to emit a new IR intrinsic for certain loops:

   void @llvm.set.loop.elements.i32(i32 )

This represents the number of data elements processed by a vector loop, and will be emitted in the preheader block of the vector loop after querying TTI that the backend understands this intrinsic and that it should be emitted for that loop. The vectoriser patch is available in D79100, and we pick this intrinsic up in the ARM backend here in D79175.

Context:

We are working on predication form that we call tail-predication: a vector hardwareloop has an implicit form of predication that sets active/inactive lanes for the last iteration of the vector loop. Thus, the scalar epilogue loop (if there is one) is tail-folded and tail-predicated in the main vector body. And to support this, we need to know the number of data elements processed by the loop, which is used in the set up of a tail-predicated vector loop. This new intrinsic communicates this information from the vectoriser to the codegen passes where we further lower these loops. In our case, we essentially let @llvm.set.loop.elements.i32 emit the trip count of the scalar loop, which represents the number of data elements processed. Thus, we let the vectoriser emits both the scalar and vector loop trip count.

Although in a different stage in the optimisation pipeline, this is exactly what the generic HardwareLoop pass is doing to communicate its information to target specific codegen passes; it emits a few intrinsics to mark a hardware loop. To illustrate this and also the new intrinsic, this is the flow and life of a tail-predicated vector loop using some heavily edited/reduced examples. First, the vectoriser emits the number of elements processed, and the loads/stores are masked because tail-folding is applied:

  vector.ph:

      call void @llvm.set.loop.elements.i32(i32 %N)

      br label %vector.body

  vector.body:

      call <4 x i32> @llvm.masked.load

      call <4 x i32> @llvm.masked.load

      call void @llvm.masked.store

      br i1 %12, label %.*, label %vector.body

After the HardwareLoop pass this is transformed into this, which adds the hardware loop intrinsics:

  vector.ph:

      call void @llvm.set.loop.elements.i32(i32 %N)

      call void @llvm.set.loop.iterations.i32(i32 %5)

      br label %vector.body

  vector.body:

      call <4 x i32> @llvm.masked.load

      call <4 x i32> @llvm.masked.load

      call void @llvm.masked.store

      call i32 @llvm.loop.decrement.reg

      br i1 %12, label %.*, label %vector.body

We then pick this up in our tail-predication pass, remove @llvm.set.loop.elements intrinsic, and add @vctp which is our intrinsic that generates the mask of active/inactive lanes:

  vector.ph:

      call void @llvm.set.loop.iterations.i32(i32 %5)

      br label %vector.body

  vector.body:

      call <4 x i1> @llvm.arm.mve.vctp32

      call <4 x i32> @llvm.masked.load

      call <4 x i32> @llvm.masked.load

      call void @llvm.masked.store

      call i32 @llvm.loop.decrement.reg

      br i1 %12, label %.*, label %vector.body

And this is then further lowered to a tail-predicted loop, or reverted to a 'normal' vector loop if some restrictions are not met.

Cheers,

Sjoerd.

---------------------------------------------------------------------
Intel Israel (74) Limited

This e-mail and any attachments may contain confidential material for
the sole use of the intended recipient(s). Any review or distribution
by others is strictly prohibited. If you are not the intended
recipient, please contact the sender and delete all copies.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.llvm.org/pipermail/llvm-dev/attachments/20200520/afe8e276/attachment.html>