[llvm-dev] Buildbots timing out on full builds

Daniel Sanders via llvm-dev llvm-dev at lists.llvm.org
Wed May 31 06:13:48 PDT 2017 

Great! I expect I'll be able to cut it down further once I start fusing these smaller state-machines together. Before that, I'll re-order the patches that went into that diff so that I don't have to re-commit the regression before fixing it.

> On 31 May 2017, at 13:48, Diana Picus <diana.picus at linaro.org> wrote:
> 
> Hi,
> 
> This runs in:
> real    13m6.296s
> user    42m45.191s
> sys     1m2.030s
> 
> (on top of a fully built r303542). It should be fine for the ARM bots.
> 
> However, you need to 'return std::move(M)' at line 1884.
> 
> @Vitaly, is it ok for your bots as well?
> 
> Cheers,
> Diana
> 
> On 31 May 2017 at 10:21, Daniel Sanders <daniel_l_sanders at apple.com <mailto:daniel_l_sanders at apple.com>> wrote:
> Hi Diana and Vitaly,
> 
> Could you give https://reviews.llvm.org/differential/diff/100829/ <https://reviews.llvm.org/differential/diff/100829/> a try? When measuring the compile of AArch64InstructionSelector.cpp.o with asan enabled and running under instruments's Allocation profiler, my machine reports that the cumulative memory allocations is down to ~3.5GB (was ~10GB), the number of allocations down to ~4 million (was ~23 million), and the compile time down to ~15s (was ~60s).
> 
> The patch is based on r303542 and the main change is that most of the generated C++ has been replaced with a state-machine based implementation. It's not fully converted to a state-machine yet since it generates lots of smaller machines (one matcher and one emitter per rule) instead of a single machine but it's hopefully sufficient to unblock my patch series.
> 
>> On 26 May 2017, at 09:10, Diana Picus <diana.picus at linaro.org <mailto:diana.picus at linaro.org>> wrote:
>> 
>> Ok, that sounds reasonable. I'm happy to test more patches for you
>> when they're ready.
>> 
>> On 25 May 2017 at 17:39, Daniel Sanders <daniel_l_sanders at apple.com <mailto:daniel_l_sanders at apple.com>> wrote:
>>> Thanks for trying that patch. I agree that 34 mins still isn't good enough but we're heading in the right direction.
>>> 
>>> Changing the partitioning predicate to the instruction opcode rather than the number of operands in the top-level instruction will hopefully cut it down further. I also have a patch that shaves a small amount off of the compile-time by replacing the various LLT::scalar()/LLT::vector() calls with references to LLT objects that were created in advance. I tried something similar with the getRegBankForRegClass() but I haven't written that as a patch yet since that one requires some refactors to get access to a mapping that RegisterBankEmitter.cpp knows. In my experiment I edited this information into AArchGenGlobalISel.inc by hand.
>>> 
>>> I think the real solution is to convert the generated C++ to the state-machine that we intended to end up with. I don't think we'll be able to put it off much longer given that we're hitting compile-time problems when we can only import 25% of the rules. That said, I have a couple more nearly-finished patches I'd like to get in before we introduce the state machine. Hopefully, the above tricks will be enough to save me a re-write.
>>> 
>>>> On 25 May 2017, at 16:11, Diana Picus <diana.picus at linaro.org <mailto:diana.picus at linaro.org>> wrote:
>>>> 
>>>> Hi Daniel,
>>>> 
>>>> I built r303542, then applied your patch and built again and it still takes
>>>> real    34m30.279s
>>>> user    84m36.553s
>>>> sys     0m58.372s
>>>> 
>>>> This is better than the 50m I saw before, but I think we should try to
>>>> make it a bit faster. Do you have any other ideas to make it work?
>>>> 
>>>> Thanks,
>>>> Diana
>>>> 
>>>> 
>>>> On 22 May 2017 at 11:22, Diana Picus <diana.picus at linaro.org <mailto:diana.picus at linaro.org>> wrote:
>>>>> Hi Daniel,
>>>>> 
>>>>> I did your experiment on a TK1 machine (same as the bots) and for r303258 I get:
>>>>> real    18m28.882s
>>>>> user    35m37.091s
>>>>> sys     0m44.726s
>>>>> 
>>>>> and for r303259:
>>>>> real    50m52.048s
>>>>> user    88m25.473s
>>>>> sys     0m46.548s
>>>>> 
>>>>> If I can help investigate, please let me know, otherwise we can just
>>>>> try your fixes and see how they affect compilation time.
>>>>> 
>>>>> Thanks,
>>>>> Diana
>>>>> 
>>>>> On 22 May 2017 at 10:49, Daniel Sanders <daniel_l_sanders at apple.com <mailto:daniel_l_sanders at apple.com>> wrote:
>>>>>> r303341 is the re-commit of the r303259 which tripled the number of rules
>>>>>> that can be imported into GlobalISel from SelectionDAG. A compile time
>>>>>> regression is to be expected but when I looked into it I found it was ~25s
>>>>>> on my machine for the whole incremental build rather than the ~12mins you
>>>>>> are seeing. I'll take another look.
>>>>>> 
>>>>>> I'm aware of a couple easy improvements we could make to the way the
>>>>>> importer works. I was leaving them until we change it over to a state
>>>>>> machine but the most obvious is to group rules by their top-level gMIR
>>>>>> instruction. This would reduce the cost of the std::sort that handles the
>>>>>> rule priorities in generating the source file and will also make it simpler
>>>>>> for the compiler to compile it.
>>>>>> 
>>>>>> 
>>>>>> On 21 May 2017, at 11:16, Vitaly Buka <vitalybuka at google.com <mailto:vitalybuka at google.com>> wrote:
>>>>>> 
>>>>>> It must be r303341, I commented on corresponding llvm-commits thread.
>>>>>> 
>>>>>> On Fri, May 19, 2017 at 7:34 AM, Diana Picus via llvm-dev
>>>>>> <llvm-dev at lists.llvm.org <mailto:llvm-dev at lists.llvm.org>> wrote:
>>>>>>> 
>>>>>>> Ok, thanks. I'll try to do a bisect next week to see if I can find it.
>>>>>>> 
>>>>>>> Cheers,
>>>>>>> Diana
>>>>>>> 
>>>>>>> On 19 May 2017 at 16:29, Daniel Sanders <daniel_l_sanders at apple.com <mailto:daniel_l_sanders at apple.com>>
>>>>>>> wrote:
>>>>>>>> 
>>>>>>>>> On 19 May 2017, at 14:54, Daniel Sanders via llvm-dev
>>>>>>>>> <llvm-dev at lists.llvm.org <mailto:llvm-dev at lists.llvm.org>> wrote:
>>>>>>>>> 
>>>>>>>>> r303259 will have increased compile-time since it tripled the number of
>>>>>>>>> importable
>>>>>>>>> SelectionDAG rules but a quick measurement building the affected file:
>>>>>>>>>  ninja
>>>>>>>>> lib/Target/<Target>/CMakeFiles/LLVM<Target>CodeGen.dir/<Target>InstructionSelector.cpp.o
>>>>>>>>> for both ARM and AArch64 didn't show a significant increase. I'll check
>>>>>>>>> whether
>>>>>>>>> it made a different to linking.
>>>>>>>> 
>>>>>>>> I don't think it's r303259. Starting with a fully built r303259, then
>>>>>>>> updating to r303258 and running 'ninja' gives me:
>>>>>>>>       real    2m28.273s
>>>>>>>>       user    13m23.171s
>>>>>>>>       sys     0m47.725s
>>>>>>>> then updating to r303259 and running 'ninja' again gives me:
>>>>>>>>       real    2m19.052s
>>>>>>>>       user    13m38.802s
>>>>>>>>       sys     0m44.551s
>>>>>>>> 
>>>>>>>>> sanitizer-x86_64-linux-fast also timed out after one of my commits this
>>>>>>>>> morning.
>>>>>>>>> 
>>>>>>>>>> On 19 May 2017, at 14:14, Diana Picus <diana.picus at linaro.org <mailto:diana.picus at linaro.org>> wrote:
>>>>>>>>>> 
>>>>>>>>>> Hi,
>>>>>>>>>> 
>>>>>>>>>> We've noticed that recently some of our bots (mostly
>>>>>>>>>> clang-cmake-armv7-a15 and clang-cmake-thumbv7-a15) started timing out
>>>>>>>>>> whenever someone commits a change to TableGen:
>>>>>>>>>> 
>>>>>>>>>> r303418:
>>>>>>>>>> http://lab.llvm.org:8011/builders/clang-cmake-armv7-a15/builds/7268 <http://lab.llvm.org:8011/builders/clang-cmake-armv7-a15/builds/7268>
>>>>>>>>>> r303346:
>>>>>>>>>> http://lab.llvm.org:8011/builders/clang-cmake-armv7-a15/builds/7242 <http://lab.llvm.org:8011/builders/clang-cmake-armv7-a15/builds/7242>
>>>>>>>>>> r303341:
>>>>>>>>>> http://lab.llvm.org:8011/builders/clang-cmake-armv7-a15/builds/7239 <http://lab.llvm.org:8011/builders/clang-cmake-armv7-a15/builds/7239>
>>>>>>>>>> r303259:
>>>>>>>>>> http://lab.llvm.org:8011/builders/clang-cmake-armv7-a15/builds/7198 <http://lab.llvm.org:8011/builders/clang-cmake-armv7-a15/builds/7198>
>>>>>>>>>> 
>>>>>>>>>> TableGen changes before that (I checked about 3-4 of them) don't have
>>>>>>>>>> this problem:
>>>>>>>>>> r303253:
>>>>>>>>>> http://lab.llvm.org:8011/builders/clang-cmake-armv7-a15/builds/7197 <http://lab.llvm.org:8011/builders/clang-cmake-armv7-a15/builds/7197>
>>>>>>>>>> 
>>>>>>>>>> That one in particular actually finishes the whole build in 635s,
>>>>>>>>>> which is only a bit over 50% of the timeout limit (1200s). So, between
>>>>>>>>>> r303253 and now, something happened that made full builds
>>>>>>>>>> significantly slower. Does anyone have any idea what that might have
>>>>>>>>>> been? Also, has anyone noticed this on other bots?
>>>>>>>>>> 
>>>>>>>>>> Thanks,
>>>>>>>>>> Diana
>>>>>>>>> 
>>>>>>>>> _______________________________________________
>>>>>>>>> LLVM Developers mailing list
>>>>>>>>> llvm-dev at lists.llvm.org <mailto:llvm-dev at lists.llvm.org>
>>>>>>>>> http://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev <http://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev>
>>>>>>>> 
>>>>>>> _______________________________________________
>>>>>>> LLVM Developers mailing list
>>>>>>> llvm-dev at lists.llvm.org <mailto:llvm-dev at lists.llvm.org>
>>>>>>> http://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev <http://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev>
>>>>>> 
>>>>>> 
>>>>>> 
>>> 
> 
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.llvm.org/pipermail/llvm-dev/attachments/20170531/bd3f6bec/attachment.html>

More information about the llvm-dev mailing list