[llvm-dev] [cfe-dev] JIT doens't resolve address - Resolve obj-Addresses?
Lang Hames via llvm-dev
llvm-dev at lists.llvm.org
Sat May 6 19:37:42 PDT 2017
Hi Bjoern,
CCing cfg-dev (since that's where the conversation started) and llvm-dev
(since it's relevant there).
Do you know if there is a way to obtain the fully resolved obj-code? I
> wanted to load the functions into a shared memory, but how? The only thing
> I receive is a function pointer, but I don't know how large the function
> 'behind' is. Even a call to _msize (windows) does only resolve in a crash.
You can access the fully-resolved object code on a per-section basis (there
is no easy way to do it per-function) by using a custom memory manager,
rather than SectionMemoryManager.
There are two ways to go about this:
(1) The easy way (only valid for shared-memory on the same machine) is to
allocate the sections directly out of shared memory (by overriding
allocateCodeSection/allocateDataSection).
(2) The hard way (which is general enough to allow you to copy the
relocated bytes to remote machines) is three part:
(a) Allocate the sections locally (e.g. using malloc, or inheriting from
SectionMemoryManager and capturing the allocation details)
(b) Override the notifyObjectLoaded method to allocate the final memory
locations, then call RTDyldMemoryManager::mapSectionAddress to map each
local allocation to its corresponding final address
(c) Override finalizeMemory to copy the relocated bytes to their final
addresses
Hope this helps.
Cheers,
Lang.
On Tue, May 2, 2017 at 10:47 PM, <bjoern.gaier at horiba.com> wrote:
> Hello Lang,
>
> your answer explained a lot to me, thank you for that. Do you know if
> there is a way to obtain the fully resolved obj-code? I wanted to load the
> functions into a shared memory, but how? The only thing I receive is a
> function pointer, but I don't know how large the function 'behind' is. Even
> a call to _msize (windows) does only resolve in a crash.
>
> Kind regards
> Björn
>
>
>
> From: Lang Hames <lhames at gmail.com>
> To: bjoern.gaier at horiba.com
> Cc: willdtz at gmail.com, Clang Dev <cfe-dev at lists.llvm.org>
> Date: 01.05.2017 20:15
> Subject: Re: [cfe-dev] JIT doens't resolve address - Resolve
> obj-Addresses?
> ------------------------------
>
>
>
> Hi Björn,
>
> I tried using your code and now it works! I'm happy and surprised!
>
> Oh - I missed that Will's code had fixed your issue. That's great. :)
>
> Do you know if there is a way to directly load .obj-Files and resolve the
> references with own addresses? Like when somebody used printf in the
> generated obj-File, but I replace the address with my own printf?
>
> You can load precompiled object files by calling addObjectSet on the
> ObjectLayer.
>
> All external symbol references are resolved by the JITSymbolResolver that
> is created by createLambdaResolver. In your example the resolution process
> is two-step: First the JIT searches its own function definitions to see if
> there is a function called "printf" defined there (this is what the call to
> CompileLayer.findSymbol does):
>
> [&](const std::string &Name) {
> printf("FLUSH :0\n");
> if (auto Sym = CompileLayer.findSymbol(Name, false))
> return Sym;
> return JITSymbol(nullptr);
> }
>
> Then, if it doesn't find a definition there, it falls back to searching in
> the current process (this is what RTDyldMemoryManager::getSymbolAddressInProcess
> does):
>
> [](const std::string &S) {
> printf("PLUSH :0\n");
> if (auto SymAddr =
> RTDyldMemoryManager::getSymbolAddressInProcess(S))
> return JITSymbol(SymAddr, JITSymbolFlags::Exported);
> return JITSymbol(nullptr);
> }
>
> If, for example, you wanted to redirect calls to printf to your own custom
> version (while resolving all other externals by the normal process) you
> could change the second lambda like so:
>
> [](const std::string &S) {
> printf("PLUSH :0\n");
> if (S == mangleName("printf"))
> return JITSymbol((JITSymbolAddress)&myCustomPrintf,
> JITSymbolFlags::Exported);
> if (auto SymAddr =
> RTDyldMemoryManager::getSymbolAddressInProcess(S))
> return JITSymbol(SymAddr, JITSymbolFlags::Exported);
> return JITSymbol(nullptr);
> }
>
> (You'll just have to pull the mangling logic from findSymbol out into its
> own "mangleName" function for this).
>
> Hope this helps.
>
> Cheers,
> Lang.
>
>
> On Sun, Apr 23, 2017 at 11:08 PM, <*bjoern.gaier at horiba.com*
> <bjoern.gaier at horiba.com>> wrote:
> Hello Mr. Dietz,
>
> I tried using your code and now it works! I'm happy and surprised! I will
> now compare the codes and try to spot the main difference! Thanks for your
> help!
> Do you know if there is a way to directly load .obj-Files and resolve the
> references with own addresses? Like when somebody used printf in the
> generated obj-File, but I replace the address with my own printf?
>
> Kind regards
> Björn
>
>
>
> From: Will Dietz <*willdtz at gmail.com* <willdtz at gmail.com>>
> To: *bjoern.gaier at horiba.com* <bjoern.gaier at horiba.com>
> Cc: Lang Hames <*lhames at gmail.com* <lhames at gmail.com>>, Clang Dev <
> *cfe-dev at lists.llvm.org* <cfe-dev at lists.llvm.org>>
> Date: 21.04.2017 21:50
> Subject: Re: [cfe-dev] JIT doens't resolve address
> Sent by: *w at wdtz.org* <w at wdtz.org>
> ------------------------------
>
>
>
> Hmm, I tried using your code (copy+pasted and then mass-dumped headers to
> fix includes), and it seems to work fine for me:
>
>
> *https://gist.github.com/dtzWill/df84b64a73001532e3fcfe73a2cffbb9#file-test-log*
> <https://gist.github.com/dtzWill/df84b64a73001532e3fcfe73a2cffbb9#file-test-log>
>
> Do you get different results when using your LLVM? If not, can you
> identify the differences between your code and what I constructed from your
> snippets?
>
> I noticed "PAUSE", are you on Windows? I'm not sure what the
> functionality/status of the JIT on Windows is, perhaps someone else can
> comment on that.
>
> ~Will
>
> On Fri, Apr 21, 2017 at 1:03 AM, via cfe-dev <*cfe-dev at lists.llvm.org*
> <cfe-dev at lists.llvm.org>> wrote:
> Hello Lang,
>
> the Code for my jit_main is a normal printf-HelloWorld program. I opended
> the file with notepad and found the following:
> ; Function Attrs: noinline norecurse uwtable
> define i32 @main() #0 {
> entry:
> %retval = alloca i32, align 4
> store i32 0, i32* %retval, align 4
> %call = call i32 (i8*, ...) @printf(i8* getelementptr inbounds ([35 x
> i8], [35 x i8]* @"\01??_C at _0CD@CMJEAMCD at Planschbeckilein?5sagt?
> 5Halloilein@", i32 0, i32 0))
> %call1 = call i32 @system(i8* getelementptr inbounds ([6 x i8], [6 x
> i8]* @"\01??_C at _05DIAHPDGL@PAUSE?$AA@", i32 0, i32 0))
> ret i32 0
> }
>
>
>
> So... there is a main... Anyway! The code for the main is this one:
> #include <stdio.h>
> #include <stdlib.h>
>
> int main()
> {
> printf("Planschbeckilein sagt Halloilein!\n");
> system("PAUSE");
>
> return 0;
> }
>
>
>
> Kind regards
> Björn
>
>
>
> From: Lang Hames <*lhames at gmail.com* <lhames at gmail.com>>
> To: *bjoern.gaier at horiba.com* <bjoern.gaier at horiba.com>
> Cc: Clang Dev <*cfe-dev at lists.llvm.org* <cfe-dev at lists.llvm.org>>
> Date: 20.04.2017 22:54
> Subject: Re: [cfe-dev] JIT doens't resolve address
> ------------------------------
>
>
>
>
> Hi Bjoern,
>
> Sorry - I just noticed that the address for your "main" function has come
> back as '0'. In this case the answer is even simpler: The JIT never found
> the function at all, and so definitely didn't have any external symbols to
> resolve, so it never called the resolver.
>
> A failure to find main has three likely causes:
>
> (1) jit_main.ll does not define main,
> (2) jit_main.ll defines main with private/internal linkage (the JIT can't
> see private/internal symbols in general)
> (3) jit_main.ll defines main with external linkage, but a system mangling
> is applied (e.g. on MacOSX 'main' is mangled to '_main'). The mangler code
> in your findSymbol function *should* correct for this, but this may fail if
> the default data layout for your TargetMachine varies from the Module's
> DataLayout.
>
> Can you share the contents of your jit_main.ll Module?
>
> Cheers,
> Lang.
>
>
> On Thu, Apr 20, 2017 at 1:35 PM, Lang Hames <*lhames at gmail.com*
> <lhames at gmail.com>> wrote:
> HI Bjoern,
>
> There are two kinds of symbol lookup in the JIT:
>
> (1) You want to find a symbol defined JIT'd code. This is what
> "findSymbol" on the JIT class does.
>
> (2) The JIT wants to fix up a module that contains references to symbols
> defined elsewhere (either in your program, or in other JIT'd code). This is
> the SymbolResolver's job.
>
> So assuming your main function in main.ll is trivial, e.g.
>
> int main() {
> return 0;
> }
>
> then your findSymbol call will return the address of the JIT'd main
> without ever needing to look anything up in the resolver.
>
> If, on the other hand, your main function contains an external reference,
> e.g.
>
> int main() {
> printf("Hello, World!"); // Reference to externally defined function
> printf.
> return 0;
> }
>
> Then you'll receive a call back on your resolver looking for the address
> of printf.
>
> Hope this helps!
>
> Cheers,
> Lang.
>
> On Thu, Apr 20, 2017 at 6:43 AM, via cfe-dev <*cfe-dev at lists.llvm.org*
> <cfe-dev at lists.llvm.org>> wrote:
> Hello LLVM-World,
>
> I was following the "Building a JIT in LLVM"-Tutorial and tried to load a
> normal main. My code is the following:
> class Jitter
> {
> private:
> std::unique_ptr<TargetMachine> TM;
> const DataLayout DL;
> ObjectLinkingLayer<> ObjectLayer;
> IRCompileLayer<decltype(ObjectLayer)> CompileLayer;
>
> public:
> typedef decltype(CompileLayer)::ModuleSetHandleT ModuleHandle;
>
> Jitter() : TM(EngineBuilder().selectTarget()), DL(TM->
> createDataLayout()),
> CompileLayer(ObjectLayer, SimpleCompiler(*TM))
> {printf("!");
> llvm::sys::DynamicLibrary::LoadLibraryPermanently(nullptr);
> }
>
> TargetMachine &getTargetMachine() { return *TM; }
>
> ModuleHandle addModule(std::unique_ptr<Module> &&M) {
> // Build our symbol resolver:
> // Lambda 1: Look back into the JIT itself to find symbols that are
> part of
> // the same "logical dylib".
> // Lambda 2: Search for external symbols in the host process.
> auto Resolver = createLambdaResolver(
> [&](const std::string &Name)
> {
> printf("FLUSH :0\n");
>
> if (auto Sym = CompileLayer.findSymbol(Name, false))
> return Sym;
> return JITSymbol(nullptr);
> },
> [](const std::string &S)
> {
> printf("PLUSH :0\n");
>
> if (auto SymAddr =
> RTDyldMemoryManager::getSymbolAddressInProcess(S))
> return JITSymbol(SymAddr, JITSymbolFlags::Exported);
> return JITSymbol(nullptr);
> });
>
> // Build a singleton module set to hold our module.
> std::vector<std::unique_ptr<Module>> Ms;
> Ms.push_back(std::move(M));
>
> // Add the set to the JIT with the resolver we created above and a newly
> // created SectionMemoryManager.
> return CompileLayer.addModuleSet(std::move(Ms),
> make_unique<SectionMemoryManager>(),
> std::move(Resolver));
> }
>
> JITSymbol findSymbol(const std::string Name) {
> std::string MangledName;
> raw_string_ostream MangledNameStream(MangledName);
> Mangler::getNameWithPrefix(MangledNameStream, Name, DL);
> printf("Tzearch for: %s\n\n", MangledNameStream.str());
> return CompileLayer.findSymbol(MangledNameStream.str(), false);
> }
>
> void removeModule(ModuleHandle H) {
> CompileLayer.removeModuleSet(H);
> }
>
> };
>
>
>
>
> And calling from main with:
> int main()
> {
> llvm::InitializeNativeTarget();
> llvm::InitializeNativeTargetAsmPrinter();
> llvm::InitializeNativeTargetAsmParser();
>
> llvm::LLVMContext context;
> llvm::SMDiagnostic dia;
>
> std::unique_ptr<llvm::Module> M = llvm::parseIRFile("./jit_main.
> ll", dia, context);
> Jitter jit;
> printf("Wuff?");
> Jitter::ModuleHandle h = jit.addModule(std::move(M));
> printf("KNUFF!\n");
>
> printf("Kuchen! 0x%p\n", jit.findSymbol("main").getAddress());
>
> system("PAUSE");
> return 0;
> }
>
>
>
> The Code runs without a fail, but when the programm tries to resolve
> "main" the address is 0. The strange thing: the printf "FLUSH :0\n" and "PLUSH
> :0\n" are never called, so did the code never compiled? What I'm doing
> wrong?
>
> Kind regards
> Björn
> Als GmbH eingetragen im Handelsregister Bad Homburg v.d.H. HRB 9816,
> USt.ID-Nr. DE 114 165 789
> Geschäftsführer: Hiroshi Kawamura, Dr Hiroshi Nakamura, Markus Bode, Heiko
> Lampert, Takashi Nagano, Takeshi Fukushima.
> _______________________________________________
> cfe-dev mailing list
> *cfe-dev at lists.llvm.org* <cfe-dev at lists.llvm.org>
> *http://lists.llvm.org/cgi-bin/mailman/listinfo/cfe-dev*
> <http://lists.llvm.org/cgi-bin/mailman/listinfo/cfe-dev>
>
>
>
>
>
> Als GmbH eingetragen im Handelsregister Bad Homburg v.d.H. HRB 9816,
> USt.ID-Nr. DE 114 165 789
> Geschäftsführer: Hiroshi Kawamura, Dr Hiroshi Nakamura, Markus Bode, Heiko
> Lampert, Takashi Nagano, Takeshi Fukushima.
>
> _______________________________________________
> cfe-dev mailing list
> *cfe-dev at lists.llvm.org* <cfe-dev at lists.llvm.org>
> *http://lists.llvm.org/cgi-bin/mailman/listinfo/cfe-dev*
> <http://lists.llvm.org/cgi-bin/mailman/listinfo/cfe-dev>
>
>
>
>
> Als GmbH eingetragen im Handelsregister Bad Homburg v.d.H. HRB 9816,
> USt.ID-Nr. DE 114 165 789
> Geschäftsführer: Hiroshi Kawamura, Dr Hiroshi Nakamura, Markus Bode, Heiko
> Lampert, Takashi Nagano, Takeshi Fukushima.
>
>
>
> Als GmbH eingetragen im Handelsregister Bad Homburg v.d.H. HRB 9816,
> USt.ID-Nr. DE 114 165 789
> Geschäftsführer: Hiroshi Kawamura, Dr Hiroshi Nakamura, Markus Bode, Heiko
> Lampert, Takashi Nagano, Takeshi Fukushima.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.llvm.org/pipermail/llvm-dev/attachments/20170506/90def2f0/attachment.html>
More information about the llvm-dev
mailing list