[llvm-dev] [RFC] Introducing a vector reduction add instruction.
Xinliang David Li via llvm-dev
llvm-dev at lists.llvm.org
Thu Nov 19 22:09:05 PST 2015
This sounds like the right approach and the result is very promising. The
VF tuning patch is already in but just not enabled by default, right?
David
On Thu, Nov 19, 2015 at 1:12 PM, Cong Hou <congh at google.com> wrote:
> After some attempt to implement reduce-add in LLVM, I found out a
> easier way to detect reduce-add without introducing new IR operations.
> The basic idea is annotating phi node instead of add (so that it is
> easier to handle other reduction operations). In PHINode class, we can
> add a flag indicating if the phi node is a reduction one (the flag can
> be set in loop vectorizer for vectorized phi nodes). Then when we
> build SDNode for instruction selection, we detect those reduction phi
> nodes and then annotate reduction operations. This requires an
> additional flag in SDNodeFlags. We can then check this flag when
> combining instructions to detect reduction operations.
>
> In this approach, I have managed to let LLVM compile a SAD loop into
> psadbw instructions.
>
> Source code:
>
>
> const int N = 1024;
> unsigned char a[N], b[N];
>
> int sad() {
> int s = 0;
> for (int i = 0; i < N; ++i) {
> int res = a[i] - b[i];
> s += (res > 0) ? res : -res;
> }
> return s;
> }
>
>
> Emitted instructions on X86:
>
>
>
> # BB#0: # %entry
> pxor %xmm0, %xmm0
> movq $-1024, %rax # imm = 0xFFFFFFFFFFFFFC00
> pxor %xmm1, %xmm1
> .align 16, 0x90
> .LBB0_1: # %vector.body
> # =>This Inner Loop Header: Depth=1
> movd b+1024(%rax), %xmm2 # xmm2 = mem[0],zero,zero,zero
> movd a+1024(%rax), %xmm3 # xmm3 = mem[0],zero,zero,zero
> psadbw %xmm2, %xmm3
> paddd %xmm3, %xmm0
> movd b+1028(%rax), %xmm2 # xmm2 = mem[0],zero,zero,zero
> movd a+1028(%rax), %xmm3 # xmm3 = mem[0],zero,zero,zero
> psadbw %xmm2, %xmm3
> paddd %xmm3, %xmm1
> addq $8, %rax
> jne .LBB0_1
> # BB#2: # %middle.block
> paddd %xmm0, %xmm1
> pshufd $78, %xmm1, %xmm0 # xmm0 = xmm1[2,3,0,1]
> paddd %xmm1, %xmm0
> pshufd $229, %xmm0, %xmm1 # xmm1 = xmm0[1,1,2,3]
> paddd %xmm0, %xmm1
> movd %xmm1, %eax
> retq
>
>
> Note that due to smaller VF we are using now (currently 4), we could
> not explore the most benefit of psadbw. The patch in
> http://reviews.llvm.org/D8943 has enables us to use bigger VFs based
> on the smallest type in a loop. The follow-up work is refining the
> cost model to let bigger VFs have less cost. For the example above the
> best result is from VF >=16.
>
> The draft of the patch is here: http://reviews.llvm.org/D14840
>
> I will refine the patch later and submit it for review.
>
>
> thanks,
> Cong
>
>
> On Wed, Nov 18, 2015 at 2:45 PM, Cong Hou <congh at google.com> wrote:
> > On Mon, Nov 16, 2015 at 9:31 PM, Shahid, Asghar-ahmad
> > <Asghar-ahmad.Shahid at amd.com> wrote:
> >> Hi Cong,
> >>
> >>> -----Original Message-----
> >>> From: Cong Hou [mailto:congh at google.com]
> >>> Sent: Tuesday, November 17, 2015 12:47 AM
> >>> To: Shahid, Asghar-ahmad
> >>> Cc: David Li
> >>> Subject: Re: [llvm-dev] [RFC] Introducing a vector reduction add
> instruction.
> >>>
> >>> On Thu, Nov 12, 2015 at 9:37 PM, Shahid, Asghar-ahmad <Asghar-
> >>> ahmad.Shahid at amd.com> wrote:
> >>> > Hi Cong,
> >>> >
> >>> > We had proposed an intrinsic approach to do this. However the
> >>> > discussion reached to a point where it was asked that "Why do we need
> >>> > another approach if "reduction add" can be pattern matched in
> >>> DAGCombine?"
> >>> > However I feel if we have strong enough rationale for introduction of
> >>> > this instruction, it would be great. The 1st link below has the
> complete
> >>> discussion about the intrinsic approach.
> >>>
> >>> Yes, I think introducing such a reduction add can let us do pattern
> recognition
> >>> of either SAD or dot production (or more?) without introducing any
> >>> additional intrinsics.
> >> I agree. Another use case could be POPCOUNT operation. Moreover, as
> 'reduction add'
> >> Is being adopted by more targets now a days, reflecting that in LLVM IR
> as an instruction
> >> Is a good idea.
> >> BTW, what is the idea of the syntax and semantic of this operation you
> have?
> >
> > We can introduce a reduce-add for vectors only, or make it general so
> > that it could also accept scale operands. Normally it is identical to
> > normal add, but during instruction selection we can do pattern
> > recognition based on more information provided by this new operations.
> > For vectors, this means the result of this operation only guarantee
> > that the sum of all elements in the result is identical to the sum of
> > all elements of its operands. This gives us enough freedom to do
> > aggressive transformations, such as SAD or dot-product.
> >
> > Do you think if this is enough for us to get there?
> >
> >
> > Cong
> >
> >>
> >> The main concern may be cost
> >>> model: we could not guarantee that a SAD loop is unrolled 16 times on
> SSE to
> >>> make use the most benefit of SAD. After the patch
> >>> http://reviews.llvm.org/D8943 is landed, I am now working on
> improving cost
> >>> models of type conversions on X86. I believe even without SAD
> instruction
> >>> we can still get better performance with unrolling a SAD loop 16
> times. This
> >>> seems tricky but it works. What do you think?
> >> I also think same as we can increase the bandwidth with proper cost
> modeling.
> >>
> >> Regards,
> >> Shahid
> >>>
> >>> Cong
> >>>
> >>> >
> >>> > http://reviews.llvm.org/D10964
> >>> > http://lists.llvm.org/pipermail/llvm-dev/2015-May/085078.html
> >>> >
> >>> > Regards,
> >>> > Shahid
> >>> >
> >>> >
> >>> >
> >>> >> -----Original Message-----
> >>> >> From: llvm-dev [mailto:llvm-dev-bounces at lists.llvm.org] On Behalf
> Of
> >>> >> Cong Hou via llvm-dev
> >>> >> Sent: Friday, November 13, 2015 5:47 AM
> >>> >> To: llvm-dev at lists.llvm.org
> >>> >> Cc: David Li
> >>> >> Subject: [llvm-dev] [RFC] Introducing a vector reduction add
> instruction.
> >>> >>
> >>> >> Hi
> >>> >>
> >>> >> When a reduction instruction is vectorized in a loop, it will be
> >>> >> turned into an instruction with vector operands of the same
> operation
> >>> >> type. This new instruction has a special property that can give us
> >>> >> more flexibility during instruction selection later: this operation
> >>> >> is valid as long as the reduction of all elements of the result
> >>> >> vector is identical to the reduction of all elements of its
> operands.
> >>> >>
> >>> >> One example that can benefit this property is SAD (sum of absolute
> >>> >> differences) pattern detection in SSE2, which provides a psadbw
> >>> >> instruction whose description is shown below:
> >>> >>
> >>> >> '''
> >>> >> psadbw: Compute the absolute differences of packed unsigned 8-bit
> >>> >> integers in a and b, then horizontally sum each consecutive 8
> >>> >> differences to produce two unsigned 16-bit integers, and pack these
> >>> >> unsigned 16-bit integers in the low 16 bits of 64-bit elements in
> dst.
> >>> >> '''
> >>> >>
> >>> >> In LLVM's IR, for a SAD loop we will have two v4i8 as inputs and one
> >>> >> v4i32 as output. However, psadbw will actually produce one i32
> result
> >>> >> for four pairs of 8-bit integers (an already reduced result), and
> the
> >>> >> result is stored in the first element in v4i32. If we properly zero
> >>> >> out the other three elements in v4i32, and with the information that
> >>> >> we have a reduction add that is performed on this result, then we
> can
> >>> >> safely use psadbw here for much better performance. This can be done
> >>> >> during DAG combine. Another similar example is dot product. And I
> >>> >> think there may be many other scenarios that can benefit from this
> >>> >> property like eliminating redundant shuffles.
> >>> >>
> >>> >> The question is, how to let DAG combiner know that a vector
> operation
> >>> >> is a reduction one?
> >>> >>
> >>> >> Here I propose to introduce a "reduction add" instruction for
> vectors.
> >>> >> This will be a new instruction with vector operands only. Normally
> it
> >>> >> is treated as a normal ADD operation, but the selection DAG combiner
> >>> >> can make use of this new operation to generate better instructions.
> >>> >> This new instruction is generated when vectorizing reduction add in
> >>> >> loop vectorizer.
> >>> >>
> >>> >> I would like to hear more comments on this proposal or suggestions
> of
> >>> >> better alternative implementations.
> >>> >>
> >>> >>
> >>> >> thanks,
> >>> >> Cong
> >>> >> _______________________________________________
> >>> >> LLVM Developers mailing list
> >>> >> llvm-dev at lists.llvm.org
> >>> >> http://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.llvm.org/pipermail/llvm-dev/attachments/20151119/0529dff4/attachment.html>
More information about the llvm-dev
mailing list