[llvm-dev] [GlobalISel] A Proposal for global instruction selection
Marcello Maggioni via llvm-dev
llvm-dev at lists.llvm.org
Wed Nov 18 15:06:06 PST 2015
Thanks Quentin for the effort in putting this together!!
I’m super excited in seeing this going forward and I’m looking forward in helping in bringing GlobalISel up as much as I can as it is very promising for our targets!
It also catched my eye that you mentioned the possibility of having Module level Machine passes.
Having that would simplify some parts of our pipeline for example I believe as now we are using some hacks to obtain basically the same result at the very end of the pipeline.
This would be useful at least for us!
> On 18 Nov 2015, at 11:26, Quentin Colombet via llvm-dev <llvm-dev at lists.llvm.org> wrote:
> With this email, I would like to kick-off the development for the next instruction selector that I described during the last LLVM Dev’ Meeting.
> For the motivations, see Jakob’s proposal (http://lists.cs.uiuc.edu/pipermail/llvmdev/2013-August/064727.html <http://lists.cs.uiuc.edu/pipermail/llvmdev/2013-August/064727.html>) and for the proposal, see the slides (Keynote: http://llvm.org/viewvc/llvm-project/www/trunk/devmtg/2015-10/slides/Colombet-GlobalInstructionSelection.key?view=co <http://llvm.org/viewvc/llvm-project/www/trunk/devmtg/2015-10/slides/Colombet-GlobalInstructionSelection.key?view=co> or PDF: http://llvm.org/viewvc/llvm-project/www/trunk/devmtg/2015-10/slides/Colombet-GlobalInstructionSelection.pdf?revision=252430&view=co <http://llvm.org/viewvc/llvm-project/www/trunk/devmtg/2015-10/slides/Colombet-GlobalInstructionSelection.pdf?revision=252430&view=co>) or the talk (https://www.youtube.com/watch?v=F6GGbYtae3g&list=PL_R5A0lGi1AA4Lv2bBFSwhgDaHvvpVU21&index=2 <https://www.youtube.com/watch?v=F6GGbYtae3g&list=PL_R5A0lGi1AA4Lv2bBFSwhgDaHvvpVU21&index=2>).
> TL;DR This is happening now, feedbacks invited!
> *** Context ***
> During the last LLVM Dev’ Meeting, I have presented a proposal for the next instruction selector, GlobalISel. The proposal is basically summarized in "High Level Prototype Design” and “Roadmap”. (If you want further details, feel free to reach me.)
> The first step of the development plan is to prototype the new framework on open source. The idea is to start prototyping now(!) and have the discussion ongoing in parallel. The reason of such approach is to have code that can be used to inform those discussions, e.g., by collecting data and trying different designs approaches. Regarding the discussion, I have listed a few points where your feedbacks would be particularly appreciated (see Feedback Invite).
> Also, as I have mentioned in my talk, some issues are controversial but I expect them to be resolved during prototype development. Specifically theses concern aspects of legalization (should parts of it be done at the LLVM IR level or all at the MI level?) and code re-use for instruction combiner. Please feel free to bring up your specific concern as I move along with the development plan.
> I expect the design to evolve with our experimental findings and your feedbacks and contributions.
> Nonetheless, we expect to nail down some design decisions once and for all as the prototype progresses. I have highlighted them with the following pattern [final].
> *** Feedback Invite ***
> If you follow and support this work you need to be aware of three things and I am eager to hear your feedback and thoughts about them: the overall goals of Global ISel, the goals of the prototype, and the impact of the prototype work on backend design.
> In the section “Goals", I defined (repeated for people that saw the talk) the goals for the Global ISel design.
> - Do you see anything missing?
> - Do you see something that should not be there?
> The prototype will answer critical design questions (see “Design Questions the Prototype Addresses at the End of M1" for examples) before the actual design of Gobal ISel is finalized, but it cannot cover everything.
> Specifically we will *not* look into improving TableGen or reuse InstCombine (see “ Proposed Approach” for the rational). Please let me know if you see any issue with that.
> There is also basic ground work needed to prepare for Global ISel and I need to extend the core MachineInstr-level APIs as explained during the talk. For this, I prepared sketches of patches to illustrate them and describe the details in the “Implications” section below. Please have a look at the patches to have a better idea of the expected impact.
> If there is anything else you want to discuss related to Global ISel feel free to reach me. In particular, several people expressed their interests during the LLVM Dev Meeting in contributing to the project. Let me know what is your area of interest, so that we can coordinate our efforts.
> Anyhow, please add [GlobalISel] in the subject line to help categorizing the emails.
> *** Goals ***
> The high level goals of the new instruction selector are:
> - Global instruction selector.
> - Fast instruction selector.
> - Shared code path for fast and good instruction selection.
> - IR that represents ISA concepts better.
> - More flexible instruction selector.
> - Easier to maintain/understand framework, in particular legalization.
> - Self contained machine representation, no back links to LLVM IR.
> - No change to LLVM IR.
> Note: The goals are common to all targets. In particular, we do not intend to work on target specific feature for the prototype.
> The bottom line is please make sure those goals are compatible with what you want to achieve for your target, even if your requirement does not get listed here.
> *** Proposed Approach ***
> In this section, I describe the approach I plan to pursue in the prototype and the roadmap to get there. The final design will flow out of it.
> For this prototype, we purposely exclude any work to improve or use TableGen or InstCombine [final]. We will keep in mind however, that some of the C++ code we write will be table-generated at some point.
> The rational is that we do not want to lay down a new TableGen/InstCombine infrastructure before being able to work on the ISel framework itself.
> The prototype vehicle will be AArch64. None of the changes for GlobalISel will negatively impact the existing ISel.
> ** High Level Prototype Design **
> As shown in the talk, the expected pipeline for the prototype is:
> LLVM IR -> IRTranslator -> Generic (G) MachineInstr -> Legalizer -> RegBankSelect -> Select -> MachineInstr
> - Terms in bold are intermediate representations.
> - Generic MachineInstrs are machine instructions with a generic opcode, e.g., ADD, COPY.
> - IRTranslator: Translate LLVM IR to (G) MachineInstr.
> - Legalizer: Legalize illegal (G) MachineInstr to legal (G) MachineInstr.
> - RegBankSelect: Assign virtual register with size to virtual register with Register Bank.
> - Select: Translate the remaining (G) MachineInstr to MachineIntr.
> ** Implications **
> As part of the bring-up of the prototype, we need to extend some of the core MachineInstr-level APIs:
> - Need to remember FastMath flags for each MachineInstr.
> - Need to know the type of each MachineInstr. We don’t want ADD8, ADD16, etc.
> - Extend the MachineRegisterInfo to support size as well as register classes for virtual registers.
> I have sketched the changes in the attached patches to help picturing how the changes would impact the existing APIs.
> Note: I do not intend to commit those changes as they are. They will go the usual review process in due time.
> The patches contain “// ***”-like comment that give a rough explanation on why those changes are needed w.r.t. the goals.
> The order of the patches could be modified since the dependencies between those are not sequential. Anyhow, here are the patches:
> 1. Introduce (some of) the generic opcode.
> 2. Make MachineFunction more independent of LLVM IR to eventually be able to delete the LLVM IR instance from the memory.
> 3. Extend MachineInstr to represent additional information attached to generic opcode.
> 4. Teach MachineRegisterInfo about size for virtual registers.
> 5. Introduce a helper class to build MachineInstr related objects.
> 6. Add new target hooks to lower the ABI directly to MachineInstr.
> 7. Introduce the IRTranslator pass.
> ** Roadmap for the Prototype **
> We plan to split the prototype in three main milestones:
> 1. Translation: LLVM IR to (G) MachineInstr translation.
> 2. Basic selector: Legal LLVM IR to target specific MachineInstr.
> 3. Simple legalization: Support scalar type legalization and some vector instructions.
> - For #1, we will not support any fancy instructions like landing pad or switch.
> - Each milestone should take about 3-4 months.
> - At the end of #2, we would have a FastISel like selector.
> Each milestone will be detailed right before starting it. The rational is that we want to accommodate what we discovered with the prototype for the next milestone. In other words, in this email, I only describe the first milestone in detail and I will give more details on the next milestone shortly before we start it and so on. For your information, here is the remaining of the intended roadmap for the full project:
> 4. Productization: Clean up implementation, stabilize the APIs.
> 5. Complex legalization: Extend legalization support to everything missing.
> 6. Completeness: Fill the blanks, e.g., landing pad.
> 7. Clean-up and performance: Add the necessary bits to be at parity or beat SelectionDAG generated code.
> 8. Transition: Document how to switch, provide tools to help.
> ** Milestone 1 **
> The first phase is focused on the IRTranslator pass.
> The IRTranslator is responsible for translating the LLVM IR into Generic MachineInstr. The IRTranslator pass uses some target hooks to perform the ABI lowering. We can either define a new API for them, e.g., ABILoweringInfo, or extend the existing TargetLowering.
> Moreover, the prototype will focus on simple instruction, i.e., we will not support switch or landing pad for this iteration.
> At the end of M1, the prototype will not be able to produce code, since we would only have the beginning of the Global ISel pipeline. Instead, we will test the IRTranslator on the generic output that is produced from the tested IR.
> * Design Decisions *
> - The IRTranslator is a final class. Its purpose is to move away from LLVM IR to MachineInstr world [final].
> - Lower the ABI as part of the translation process [final].
> * Design Questions the Prototype Addresses at the End of M1 *
> - Handling of aggregate types during the translation.
> - Lowering of switches.
> - What about Module pass for Machine pass?
> - Introduce new APIs to have a clearer separation between:
> - Legalization (setOperationAction, etc.)
> - Cost/Combine related (isXXXFree, etc.)
> - Lowering related (LowerFormal, etc.)
> - What is the contract with the backends? Is it still “should be able to select any valid LLVM IR”?
> LLVM Developers mailing list
> llvm-dev at lists.llvm.org
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the llvm-dev