[llvm-dev] [cfe-dev] RFC: Supporting macros in LLVM debug info
David Blaikie via llvm-dev
llvm-dev at lists.llvm.org
Fri Nov 13 14:49:53 PST 2015
On Fri, Nov 13, 2015 at 2:41 PM, Richard Smith <richard at metafoo.co.uk>
wrote:
> On Fri, Nov 13, 2015 at 10:21 AM, David Blaikie via cfe-dev <
> cfe-dev at lists.llvm.org> wrote:
>
>> On Mon, Nov 9, 2015 at 4:00 AM, Aboud, Amjad <amjad.aboud at intel.com>
>> wrote:
>>
>>> I found a way to skip representing macros in AST and create them
>>> directly in CGDebugInfo through PPCallbacks during preprocessing.
>>>
>>> To do that, I needed to extend ASTConsumer interface with this extra
>>> method:
>>>
>>>
>>>
>>> /// If the consumer is interested in notifications from Preprocessor,
>>>
>>> /// for example: notifications on macro definitions, etc., it should
>>> return
>>>
>>> /// a pointer to a PPCallbacks here.
>>>
>>> /// The caller takes ownership on the returned pointer.
>>>
>>> virtual PPCallbacks *CreatePreprocessorCallbacks() { return nullptr; }
>>>
>>>
>>>
>>> Then the ParseAST can use it to add these preprocessor callbacks, which
>>> are needed by the AST consumer, to the preprocessor:
>>>
>>>
>>>
>>> S.getPreprocessor().addPPCallbacks(
>>>
>>> std::unique_ptr<PPCallbacks
>>> >(Consumer->CreatePreprocessorCallbacks()));
>>>
>>
>> (CreatePreprocessorCallbacks, if that's the path we take, should return a
>> unique_ptr itself rather than returning a raw ownership-passing pointer,
>> but that's a minor API detail)
>>
>>
>>>
>>>
>>> With this, approach the change in clang to support macros is very small.
>>>
>>>
>>>
>>> Do you agree to this approach?
>>>
>>
>> Richard - what do you reckon's the right hook/path to get preprocessor
>> info through to codegen (& CGDebugInfo in particular). Would a general
>> purpose hook in the ASTConsumer be appropriate/useful?
>>
>
> ASTConsumer shouldn't know anything about the preprocessor; there's no
> reason to think, in general, that the AST is being produced by
> preprocessing and parsing some text.
>
Hmm, I suppose a fair question then - would it be possible to implement
debug info for macros when reading ASTs from a serialized file (without a
preprocessor). Or should we actually go with the original proposal of
creating AST nodes for the preprocessor events so we can have access to
them after loading serialized modules & then generating debug info from
them? Is there some other side table we'd be better off using/creating for
this task?
> Perhaps adding a PreprocessorConsumer interface akin to the existing
> SemaConsumer interface would be a better way to go.
>
> Thanks,
>>>
>>> Amjad
>>>
>>>
>>>
>>> *From:* llvm-dev [mailto:llvm-dev-bounces at lists.llvm.org] *On Behalf Of
>>> *Aboud, Amjad via llvm-dev
>>> *Sent:* Thursday, November 05, 2015 16:56
>>> *To:* David Blaikie
>>>
>>> *Cc:* llvm-dev at lists.llvm.org
>>> *Subject:* Re: [llvm-dev] RFC: Supporting macros in LLVM debug info
>>>
>>>
>>>
>>> > Right - I was wondering if CGDebugInfo already implemented
>>> PPCallbacks or was otherwise being notified of PPCallback related things,
>>> possibly through a layer or two of indirection.
>>>
>>>
>>>
>>> I checked the approach of skipping representing macros in AST, and
>>> communicate them directly from Parser to CGDebugInfo.
>>>
>>> However, I could not find a way to initialize this communication.
>>>
>>> The only interface available through Parser is either Sema (to create an
>>> AST) or ASTConsumer. While the CGDebugInfo is only available in the
>>> CodeGenModule, which is accessible from BackendConsumer, that implements
>>> ASTConsumer.
>>>
>>>
>>>
>>> David, skipping the AST will save a lot of code, but I need help
>>> figuring out how to communicate with the CGDebugInfo.
>>>
>>>
>>>
>>> Thanks,
>>>
>>> Amjad
>>>
>>>
>>>
>>> *From:* David Blaikie [mailto:dblaikie at gmail.com <dblaikie at gmail.com>]
>>> *Sent:* Tuesday, November 03, 2015 18:46
>>> *To:* Aboud, Amjad
>>> *Cc:* llvm-dev at lists.llvm.org
>>> *Subject:* Re: [llvm-dev] RFC: Supporting macros in LLVM debug info
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> On Tue, Nov 3, 2015 at 12:16 AM, Aboud, Amjad <amjad.aboud at intel.com>
>>> wrote:
>>>
>>> > Do we really need to touch the AST? Or would it be reasonable to wire
>>> up the CGDebugInfo directly to the PPCallbacks, if it isn't already?
>>> (perhaps it is already wired up for other reasons?)
>>>
>>> This sound as a good idea, I will check that approach.
>>>
>>> PPCallbacks is only an interface, has nothing connected to it, but we
>>> will create a new class, which implement PPCallbacks, for macros.
>>>
>>>
>>>
>>> Right - I was wondering if CGDebugInfo already implemented PPCallbacks
>>> or was otherwise being notified of PPCallback related things, possibly
>>> through a layer or two of indirection.
>>>
>>>
>>>
>>> So we can connect whatever we want to that class.
>>>
>>> The only drawback with this approach, is that we can test the frontend
>>> using the generated LLVM IR, i.e. the whole path, instead of having two
>>> tests, AST for testing the parser, and LLVM IR for testing the Sema.
>>>
>>>
>>>
>>> We don't usually do direct AST tests in Clang for debug info (or for
>>> many things, really) - we just do source -> llvm IR anyway, so that's
>>> nothing out of the ordinary.
>>>
>>>
>>>
>>>
>>>
>>> > I wonder if it'd be better to use a parent chain style approach
>>> (DIMacro has a DIMacroFile it refers to, each DIMacroFile has another one
>>> that it refers to, up to null)?
>>> > (does it ever make sense/need to have a DIMacroFile without any macros
>>> in it? I assume not?)
>>> First, it seems that GCC does emit MacroFile that has no macros inside
>>> (I understand that it might not be useful, but I am not sure if we should
>>> ignore that or not).
>>>
>>>
>>>
>>> Yeah, that's weird - I'd sort of be inclined to skip it until we know
>>> what it's useful for.
>>>
>>>
>>>
>>> Second, I assume that you are suggesting the parent chain style instead
>>> to the current children style, right?
>>>
>>>
>>>
>>> Correct
>>>
>>>
>>>
>>> In this case, won’t it make the debug emitter code much complicated to
>>> figure out the DFS tree,
>>>
>>>
>>>
>>> I don't quite imagine it would be more complicated - we would just be
>>> building the file parent chain as we go, and keeping the current macro file
>>> around to be used as the parent to any macros we create.
>>>
>>>
>>>
>>> which should be emitted for the macros, not mentioning the macro order
>>> which will be lost?
>>>
>>>
>>>
>>> Not necessarily, if we kept the macros in order in the list of macros
>>> attached to the CU, which I imagine we would.
>>>
>>>
>>>
>>> Also, remember that the command line macros have no DIMacroFile parent.
>>>
>>>
>>>
>>> Fair - they could have the null parent, potentially.
>>>
>>>
>>>
>>> However, if you meant to use the parent chain in addition to the
>>> children list, then what extra information it will give us?
>>>
>>>
>>>
>>> >Might be good to start with dwarfdump support - seems useful regardless
>>> of anything else?
>>>
>>> I agree, and in fact, I already have this code implemented, will upload
>>> it for review soon.
>>>
>>>
>>>
>>> Cool
>>>
>>>
>>>
>>>
>>>
>>> Thanks,
>>>
>>> Amjad
>>>
>>>
>>>
>>> *From:* David Blaikie [mailto:dblaikie at gmail.com]
>>> *Sent:* Tuesday, November 03, 2015 00:32
>>> *To:* Aboud, Amjad
>>> *Cc:* llvm-dev at lists.llvm.org
>>> *Subject:* Re: [llvm-dev] RFC: Supporting macros in LLVM debug info
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> On Wed, Oct 28, 2015 at 7:56 AM, Aboud, Amjad via llvm-dev <
>>> llvm-dev at lists.llvm.org> wrote:
>>>
>>> Hi,
>>>
>>> I would like to implement macro debug info support in LLVM.
>>>
>>> Below you will find 4 parts:
>>>
>>> 1. Background on what does it mean to debug macros.
>>>
>>> 2. A brief explanation on how to represent macro debug info in
>>> DWARF 4.0.
>>>
>>> 3. The suggested design.
>>>
>>> 4. A full example: Source -> AST -> LLVM IR -> DWARF.
>>>
>>>
>>>
>>> Feel free to skip first two parts if you think you know the background.
>>>
>>> Please, let me know if you have any comment or feedback on this approach.
>>>
>>>
>>>
>>> Thanks,
>>>
>>> Amjad
>>>
>>>
>>>
>>> *[Background]*
>>>
>>> There are two kind of macro definition:
>>>
>>> 1. Simple macro definition, e.g. #define M1 Value1
>>>
>>> 2. Function macro definition, e.g. #define M2(x, y) (x) + (y)
>>>
>>> Macro scope starts with the "#define" directive and ends with "#undef"
>>> directive.
>>>
>>>
>>>
>>> GDB supports debugging macros. This means, it can evaluate the macro
>>> expression for all macros, which have a scope that interleaves with the
>>> current breakpoint.
>>>
>>> For example:
>>>
>>> GDB command: print M2(3, 5)
>>>
>>> GDB Result: 8
>>>
>>>
>>>
>>> GDB can evaluate the macro expression based on the ".debug_macroinfo"
>>> section (DWARF 4.0).
>>>
>>>
>>>
>>> *[DWARF 4.0 ".debug_macroinfo" section]*
>>>
>>> In this section there are 4 kinds of entries
>>>
>>> 1. DW_MACROINFO_define
>>>
>>> 2. DW_MACROINFO_undef
>>>
>>> 3. DW_MACROINFO_start_file
>>>
>>> 4. DW_MACROINFO_end_file
>>>
>>>
>>>
>>> Note: There is a 5th kind of entry for vendor specific macro
>>> information, that we do not need to support.
>>>
>>>
>>>
>>> The first two entries contain information about the line number where
>>> the macro is defined/undefined, and a null terminated string, which contain
>>> the macro name (followed by the replacement value in case of a definition,
>>> or a list of parameters then the replacement value in case of function
>>> macro definition).
>>>
>>> The third entry contains information about the line where the file was
>>> included followed by the file id (an offset into the files table in the
>>> debug line section).
>>>
>>> The fourth entry contains nothing, and it just close the previous entry
>>> of third kind (start_file) .
>>>
>>>
>>>
>>> Macro definition and file including entries must appear at the same
>>> order as they appear in the source file. Where all macro entries between
>>> "start_file" and "end_file" entries represent macros appears
>>> directly/indirectly in the included file.
>>>
>>>
>>>
>>> Special cases:
>>>
>>> 1. The main source file should be the first "start_file" entry in
>>> the sequence, and should have line number "0".
>>>
>>> 2. Command line/Compiler definitions must also have line number
>>> "0" but must appear before the first "start_file" entry.
>>>
>>> 3. Command line include files, must also have line number "0" but
>>> will appear straight after the "start_file" of the main source.
>>>
>>>
>>>
>>> *[Design]*
>>>
>>> To support macros the following components need to be modified: Clang,
>>> LLVM IR, Dwarf Debug emitter.
>>>
>>>
>>>
>>> In clang, we need to handle these source directives:
>>>
>>> 1. #define
>>>
>>> 2. #undef
>>>
>>> 3. #include
>>>
>>> The idea is to make a use of "PPCallbacks" class, which allows
>>> preprocessor to notify the parser each time one of the above directives
>>> occurs.
>>>
>>> These are the callbacks that should be implemented:
>>>
>>> "MacroDefined", "MacroUndefined", "FileChanged", and
>>> "InclusionDirective".
>>>
>>>
>>>
>>> AST will be extended to support two new DECL types: "MacroDecl" and
>>> "FileIncludeDecl".
>>>
>>>
>>>
>>> Do we really need to touch the AST? Or would it be reasonable to wire up
>>> the CGDebugInfo directly to the PPCallbacks, if it isn't already? (perhaps
>>> it is already wired up for other reasons?)
>>>
>>>
>>>
>>> Where "FileIncludeDecl" AST might contain other
>>> "FileIncludeDecl"/"MacroDecl" ASTs.
>>>
>>> These two new AST DECLs are not part of TranslationUnitDecl and are
>>> handled separately (see AST example below).
>>>
>>>
>>>
>>> In the LLVM IR, metadata debug info will be extended to support new DIs
>>> as well:
>>>
>>> "DIMacro", "DIFileInclude", and "MacroNode".
>>>
>>> The last, is needed as we cannot use DINode as a base class of "DIMacro"
>>> and DIFileInclude" nodes.
>>>
>>>
>>>
>>> DIMacro will contain:
>>>
>>> · type (definition/undefinition).
>>>
>>> · line number (interger).
>>>
>>> · name (null terminated string).
>>>
>>> · replacement value (null terminated string - optional).
>>>
>>>
>>>
>>> DIFileMacro will contain:
>>>
>>> · line number (interger).
>>>
>>> · file (DIFile).
>>>
>>> · macro list (MacroNodeArray) - optional.
>>>
>>>
>>>
>>> I wonder if it'd be better to use a parent chain style approach (DIMacro
>>> has a DIMacroFile it refers to, each DIMacroFile has another one that it
>>> refers to, up to null)?
>>> (does it ever make sense/need to have a DIMacroFile without any macros
>>> in it? I assume not?)
>>>
>>>
>>> Might be good to start with dwarfdump support - seems useful regardless
>>> of anything else?
>>>
>>>
>>>
>>>
>>>
>>> In addition, the DICompileUnit will contain a new optional field of
>>> macro list of type (MacroNodeArray).
>>>
>>>
>>>
>>> Finally, I assume that macro support should be disabled by default, and
>>> there should be a flag to enable this feature. I would say that we should
>>> introduce a new specific flag, e.g. "-gmacro", that could be used with
>>> "-g".
>>>
>>>
>>>
>>> *[Example]*
>>>
>>> Here is an example that demonstrate the macro support from
>>> Source->AST->LLVM IR->DWARF.
>>>
>>>
>>>
>>> Source
>>>
>>> =========================================================
>>>
>>> mainfile.c:
>>>
>>>
>>> --------------------------------------------------------------------------------------
>>>
>>> 1. #define M1 Value1
>>>
>>> 2. #include "myfile.h"
>>>
>>> 3. #define M2( x , y) ( (x) + (y) * Value2)
>>>
>>>
>>> --------------------------------------------------------------------------------------
>>>
>>>
>>>
>>> myfile.h:
>>>
>>>
>>> --------------------------------------------------------------------------------------
>>>
>>> 1.
>>>
>>> 2.
>>>
>>> 3.
>>>
>>> 4. #undef M1
>>>
>>> 5. #define M1 NewValue1
>>>
>>>
>>> --------------------------------------------------------------------------------------
>>>
>>>
>>>
>>> myfile2.h:
>>>
>>>
>>> --------------------------------------------------------------------------------------
>>>
>>> 1. #define M4 Value4
>>>
>>>
>>> --------------------------------------------------------------------------------------
>>>
>>> =========================================================
>>>
>>>
>>>
>>> Command line:
>>>
>>> clang -c -g -gmacro -O0 -DM3=Value3 -include myfile2.h mainfile.c
>>>
>>>
>>>
>>>
>>>
>>> AST
>>>
>>> =========================================================
>>>
>>> MacroDecl 0xd6c5c0 <<invalid sloc>> <invalid sloc> __llvm__ defined
>>>
>>> MacroDecl 0xd6c618 <<invalid sloc>> <invalid sloc> __clang__ defined
>>>
>>>
>>>
>>> … <More compiler macros> …
>>>
>>>
>>>
>>> MacroDecl 0x11c01b0 <<invalid sloc>> <invalid sloc> M3 defined
>>>
>>> FileIncludeDecl 0x11c0208 <mainfile.c:1:1> col:1
>>>
>>> |-FileIncludeDecl 0x11c0238 <myfile2.h:1:1> col:1
>>>
>>> | `-MacroDecl 0x11c0268 <<invalid sloc>> <invalid sloc> M4 defined
>>>
>>> |-MacroDecl 0x11c02c0 <mainfile.c:1:9> col:9 M1 defined
>>>
>>> |-FileIncludeDecl 0x11c0318 <myfile.h:1:1> col:1
>>>
>>> | |-MacroDecl 0x11c0348 <line:4:8> col:8 M1 undefined
>>>
>>> | `-MacroDecl 0x11c03a0 <line:5:9> col:9 M1 defined
>>>
>>> `-MacroDecl 0x11c03f8 <mainfile.c:3:9> col:9 M2 defined
>>>
>>> TranslationUnitDecl 0xd6c078 <<invalid sloc>> <invalid sloc>
>>>
>>> |-TypedefDecl 0xd6c330 <<invalid sloc>> <invalid sloc> implicit
>>> __int128_t '__int128'
>>>
>>> |-TypedefDecl 0xd6c370 <<invalid sloc>> <invalid sloc> implicit
>>> __uint128_t 'unsigned __int128'
>>>
>>> |-TypedefDecl 0xd6c3c8 <<invalid sloc>> <invalid sloc> implicit
>>> __builtin_ms_va_list 'char *'
>>>
>>> `-TypedefDecl 0xd6c590 <<invalid sloc>> <invalid sloc> implicit
>>> __builtin_va_list 'struct __va_list_tag [1]'
>>>
>>> =========================================================
>>>
>>>
>>>
>>>
>>>
>>> LLVM IR
>>>
>>> =========================================================
>>>
>>> target datalayout = "e-m:e-i64:64-f80:128-n8:16:32:64-S128"
>>>
>>> target triple = "x86_64-pc-linux"
>>>
>>>
>>>
>>> !llvm.dbg.cu = !{!0}
>>>
>>> !llvm.module.flags = !{!327}
>>>
>>> !llvm.ident = !{!328}
>>>
>>>
>>>
>>> !0 = distinct !DICompileUnit(language: DW_LANG_C99, file: !1, producer:
>>> "clang version 3.8.0 (trunk 251321)", isOptimized: false, runtimeVersion:
>>> 0, emissionKind: 1, enums: !2, macros: !3)
>>>
>>> !1 = !DIFile(filename: "mainfile.c", directory: "/")
>>>
>>> !2 = !{}
>>>
>>> !3 = !{!4, !5, … <More compiler macros> … , !312, !313}
>>>
>>> !4 = !DIMacro(macro type: DW_MACINFO_define, name: "__llvm__", value:
>>> !"1")
>>>
>>> !5 = !DIMacro(macro type: DW_MACINFO_define, name: "__clang__", value:
>>> !"1")
>>>
>>>
>>>
>>> … <More compiler macros> …
>>>
>>>
>>>
>>> !312 = !DIMacro(macro type: DW_MACINFO_define, name: "M3", value:
>>> !"Value3")
>>>
>>> !313 = !DIFileInclude(file: !314, nodes: !315)
>>>
>>> !314 = !DIFile(filename: "mainfile.c", directory: "/")
>>>
>>> !315 = !{!316, !320, !321, !326}
>>>
>>> !316 = !DIFileInclude(file: !317, nodes: !318)
>>>
>>> !317 = !DIFile(filename: "myfile2.h", directory: "/")
>>>
>>> !318 = !{!319}
>>>
>>> !319 = !DIMacro(macro type: DW_MACINFO_define, name: "M4", value:
>>> !"Value4")
>>>
>>> !320 = !DIMacro(macro type: DW_MACINFO_define, name: "M1", line: 1,
>>> value: !"Value1")
>>>
>>> !321 = !DIFileInclude(line: 2, file: !322, nodes: !323)
>>>
>>> !322 = !DIFile(filename: "myfile.h", directory: "/")
>>>
>>> !323 = !{!324, !325}
>>>
>>> !324 = !DIMacro(macro type: DW_MACINFO_undef, name: "M1", line: 4)
>>>
>>> !325 = !DIMacro(macro type: DW_MACINFO_define, name: "M1", line: 5,
>>> value: !"NewValue1")
>>>
>>> !326 = !DIMacro(macro type: DW_MACINFO_define, name: "M2(x,y)", line: 3,
>>> value: !"( (x) + (y) * Value2)")
>>>
>>> !327 = !{i32 2, !"Debug Info Version", i32 3}
>>>
>>> !328 = !{!"clang version 3.8.0 (trunk 251321)"}
>>>
>>> =========================================================
>>>
>>>
>>>
>>>
>>>
>>> DWARF
>>>
>>> =========================================================
>>>
>>> Command line: llvm-dwarfdump.exe -debug-dump=macro mainfile.o
>>>
>>>
>>> --------------------------------------------------------------------------------------
>>>
>>> mainfile3.o: file format ELF64-x86-64
>>>
>>>
>>>
>>> .debug_macinfo contents:
>>>
>>> DW_MACINFO_define - lineno: 0 macro: __llvm__ 1
>>>
>>> DW_MACINFO_define - lineno: 0 macro: __clang__ 1
>>>
>>>
>>>
>>> … <More compiler macros> …
>>>
>>>
>>>
>>> DW_MACINFO_define - lineno: 0 macro: M3 Value3
>>>
>>> DW_MACINFO_start_file - lineno: 0 filenum: 1
>>>
>>> DW_MACINFO_start_file - lineno: 0 filenum: 2
>>>
>>> DW_MACINFO_define - lineno: 0 macro: M4 Value4
>>>
>>> DW_MACINFO_end_file
>>>
>>> DW_MACINFO_define - lineno: 1 macro: M1 Value1
>>>
>>> DW_MACINFO_start_file - lineno: 2 filenum: 3
>>>
>>> DW_MACINFO_undef - lineno: 4 macro: M1
>>>
>>> DW_MACINFO_define - lineno: 5 macro: M1 NewValue1
>>>
>>> DW_MACINFO_end_file
>>>
>>> DW_MACINFO_define - lineno: 3 macro: M2(x,y) ( (x) + (y) * Value2)
>>>
>>> DW_MACINFO_end_file
>>>
>>>
>>>
>>>
>>> --------------------------------------------------------------------------------------
>>>
>>> Command line: llvm-dwarfdump.exe -debug-dump=line mainfile.o
>>>
>>>
>>> --------------------------------------------------------------------------------------
>>>
>>> .debug_line contents:
>>>
>>>
>>>
>>> … <Other line table Info> …
>>>
>>>
>>>
>>> Dir Mod Time File Len File Name
>>>
>>> ---- ---------- ---------- ---------------------------
>>>
>>> file_names[ 1] 1 0x00000000 0x00000000 mainfile.c
>>>
>>> file_names[ 2] 1 0x00000000 0x00000000 myfile2.h
>>>
>>> file_names[ 3] 1 0x00000000 0x00000000 myfile.h
>>>
>>> =========================================================
>>>
>>>
>>>
>>> ---------------------------------------------------------------------
>>> Intel Israel (74) Limited
>>>
>>> This e-mail and any attachments may contain confidential material for
>>> the sole use of the intended recipient(s). Any review or distribution
>>> by others is strictly prohibited. If you are not the intended
>>> recipient, please contact the sender and delete all copies.
>>>
>>>
>>> _______________________________________________
>>> LLVM Developers mailing list
>>> llvm-dev at lists.llvm.org
>>> http://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev
>>>
>>>
>>>
>>> ---------------------------------------------------------------------
>>> Intel Israel (74) Limited
>>>
>>> This e-mail and any attachments may contain confidential material for
>>> the sole use of the intended recipient(s). Any review or distribution
>>> by others is strictly prohibited. If you are not the intended
>>> recipient, please contact the sender and delete all copies.
>>>
>>>
>>>
>>> ---------------------------------------------------------------------
>>> Intel Israel (74) Limited
>>>
>>> This e-mail and any attachments may contain confidential material for
>>> the sole use of the intended recipient(s). Any review or distribution
>>> by others is strictly prohibited. If you are not the intended
>>> recipient, please contact the sender and delete all copies.
>>>
>>> ---------------------------------------------------------------------
>>> Intel Israel (74) Limited
>>>
>>> This e-mail and any attachments may contain confidential material for
>>> the sole use of the intended recipient(s). Any review or distribution
>>> by others is strictly prohibited. If you are not the intended
>>> recipient, please contact the sender and delete all copies.
>>>
>>
>>
>> _______________________________________________
>> cfe-dev mailing list
>> cfe-dev at lists.llvm.org
>> http://lists.llvm.org/cgi-bin/mailman/listinfo/cfe-dev
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.llvm.org/pipermail/llvm-dev/attachments/20151113/90eef5a6/attachment-0001.html>
More information about the llvm-dev
mailing list