[LLVMdev] Problems compiling llvm-gcc4 frontend on x86_64
Warren Armstrong
warren.armstrong at anu.edu.au
Sun May 27 06:24:48 PDT 2007
Hi Ferad,
Yes, that worked. Thanks!
Cheers,
Warren
Ferad Zyulkyarov wrote:
> Hi Warren,
> you can try to configure with the following
>
> export CFLAGS="-m64"
> export LDFLAGS="-L/usr/lib64"
>
> LLVM:
> ../src/configure --prefix=`pwd`../install --enable-optimized --enable-jit
> --enable-targets=host-only
> make
>
> LLVM-GCC:
> ../llvm-gcc4-2.0.source/configure --prefix=`pwd`../install
> --program-prefix=llvm- --enable-llvm=/home/warren/llvm/obj/
> --enable-languages=c,c++ --disable-shared --disable-multilib
>
> make
>
> Sometimes the gcc you use to compile matters. I wasn't able to compile with
> 4.1.* for example. I use 4.0.4 right now.
>
> Regards,
> Ferad Zyulkyarov
>
>
> On 5/26/07, Bill Wendling <isanbard at gmail.com> wrote:
>>
>> Hi Warren,
>>
>> You have the -m32 flag set, but it's still giving you this:
>>
>> > Warning: Generation of 64-bit code for a 32-bit processor requested.
>> > Warning: 64-bit processors all have at least SSE2.
>>
>> But are you sure you want to compile the LLVM-GCC source? You should
>> use the binaries unless absolutely necessary.
>>
>> -bw
>>
>> On May 24, 2007, at 10:34 PM, Warren Armstrong wrote:
>>
>> > Hi all,
>> >
>> > I've run into problems compiling the llvm-gcc frontend on x86_64.
>> > Is this
>> > not supported, or am I making an error somewhere?
>> >
>> > The procedure I followed was:
>> >
>> > 1. Download LLVM 2.0 source as a tarball (from a few days ago, during
>> > the testing phase).
>> > 2. Download the llvm-gcc4 source today, as a tarball.
>> > 3. Extract both.
>> >
>> > 4. Configure LLVM as: ../src/configure --prefix=`pwd`../install
>> > --enable-optimized --enable-jit --enable-targets=host-only
>> > (There is no llvm-gcc in the path)
>> > 5. make ENABLE_OPTIMIZED=1
>> >
>> > 6. Configure the frontend as:
>> > ../llvm-gcc4-2.0.source/configure --prefix=`pwd`../install
>> > --program-prefix=llvm- --enable-llvm=/home/warren/llvm/obj/
>> > --enable-languages=c,c++ --disable-shared
>> >
>> > 7. make LLVM_VERSION_INFO=2.0
>> >
>> > This produced errors from the assembler. I reran the failing command
>> > with -v, and got the output below.
>> > I then changed the command to use -S instead of -c, the resulting
>> > assembler is attached.
>> >
>> > Any advice gratefully received.
>> >
>> > Cheers,
>> > Warren
>> >
>> > --------------
>> >
>> > Failing command:
>> >
>> >
>> > warren at sunnyvale:~/llvm-gcc/obj/gcc> /home/warren/llvm-gcc/obj/gcc/
>> > xgcc
>> > -v -B/home/warren/llvm-gcc/obj/gcc/
>> > -B/home/warren/llvm-gcc/obj../install/x86_64-unknown-linux-gnu/bin/
>> > -B/home/warren/llvm-gcc/obj../install/x86_64-unknown-linux-gnu/lib/
>> > -isystem
>> > /home/warren/llvm-gcc/obj../install/x86_64-unknown-linux-gnu/include
>> > -isystem
>> > /home/warren/llvm-gcc/obj../install/x86_64-unknown-linux-gnu/sys-
>> > include
>> > -O2 -DIN_GCC -W -Wall -Wwrite-strings -Wstrict-prototypes
>> > -Wmissing-prototypes -Wold-style-definition -isystem ./include -I.
>> > -I32 -I../../llvm-gcc4-2.0.source/gcc
>> > -I../../llvm-gcc4-2.0.source/gcc/32
>> > -I../../llvm-gcc4-2.0.source/gcc/../include
>> > -I../../llvm-gcc4-2.0.source/gcc/../libcpp/include
>> > -I/home/warren/llvm/llvm-2.0/include -I/home/warren/llvm/obj//include
>> > -m32 -g0 -finhibit-size-directive -fno-inline-functions -fno-
>> > exceptions
>> > -fno-zero-initialized-in-bss -fno-unit-at-a-time -fno-omit-frame-
>> > pointer
>> > -fno-asynchronous-unwind-tables -c
>> > ../../llvm-gcc4-2.0.source/gcc/crtstuff.c -DCRT_BEGIN -o 32/
>> > crtbegin.o
>> > Reading specs from /home/warren/llvm-gcc/obj/gcc/specs
>> > Target: x86_64-unknown-linux-gnu
>> > Configured with: ../llvm-gcc4-2.0.source/configure
>> > --prefix=/home/warren/llvm-gcc/obj../install --program-prefix=llvm-
>> > --enable-llvm=/home/warren/llvm/obj/ --enable-languages=c,c++
>> > --disable-shared
>> > Thread model: posix
>> > gcc version 4.0.1 LLVM (Apple Computer, Inc. build 2.0)
>> > /home/warren/llvm-gcc/obj/gcc/cc1 -quiet -v -I. -I32
>> > -I../../llvm-gcc4-2.0.source/gcc -I../../llvm-gcc4-2.0.source/gcc/32
>> > -I../../llvm-gcc4-2.0.source/gcc/../include
>> > -I../../llvm-gcc4-2.0.source/gcc/../libcpp/include
>> > -I/home/warren/llvm/llvm-2.0/include -I/home/warren/llvm/obj//include
>> > -iprefix
>> > /home/warren/llvm-gcc/obj/gcc/../lib/gcc/x86_64-unknown-linux-gnu/
>> > 4.0.1/
>> > -isystem /home/warren/llvm-gcc/obj/gcc/include -DIN_GCC -DCRT_BEGIN
>> > -isystem
>> > /home/warren/llvm-gcc/obj../install/x86_64-unknown-linux-gnu/include
>> > -isystem
>> > /home/warren/llvm-gcc/obj../install/x86_64-unknown-linux-gnu/sys-
>> > include
>> > -isystem ./include ../../llvm-gcc4-2.0.source/gcc/crtstuff.c -quiet
>> > -dumpbase crtstuff.c -m32 -mtune=generic -auxbase-strip 32/crtbegin.o
>> > -g0 -O2 -W -Wall -Wwrite-strings -Wstrict-prototypes
>> > -Wmissing-prototypes -Wold-style-definition -version
>> > -finhibit-size-directive -fno-inline-functions -fno-exceptions
>> > -fno-zero-initialized-in-bss -fno-unit-at-a-time -fno-omit-frame-
>> > pointer
>> > -fno-asynchronous-unwind-tables -o /tmp/ccBy56Wo.s
>> > ignoring nonexistent directory
>> > "/home/warren/llvm-gcc/obj../install/x86_64-unknown-linux-gnu/include"
>> > ignoring nonexistent directory
>> > "/home/warren/llvm-gcc/obj../install/x86_64-unknown-linux-gnu/sys-
>> > include"
>> > ignoring duplicate directory "./include"
>> > ignoring nonexistent directory
>> > "/home/warren/llvm-gcc/obj/gcc/../lib/gcc/x86_64-unknown-linux-gnu/
>> > 4.0.1/include"
>> > ignoring nonexistent directory
>> > "/home/warren/llvm-gcc/obj/gcc/../lib/gcc/x86_64-unknown-linux-gnu/
>> > 4.0.1/../../../../x86_64-unknown-linux-gnu/include"
>> > ignoring nonexistent directory "/home/warren/llvm-gcc/obj../install/
>> > include"
>> > ignoring nonexistent directory
>> > "/home/warren/llvm-gcc/obj../install/lib/gcc/x86_64-unknown-linux-
>> > gnu/4.0.1/include"
>> > ignoring nonexistent directory
>> > "/home/warren/llvm-gcc/obj../install/x86_64-unknown-linux-gnu/include"
>> > ignoring nonexistent directory "../../llvm-gcc4-2.0.source/gcc/32"
>> > #include "..." search starts here:
>> > #include <...> search starts here:
>> > .
>> > 32
>> > ../../llvm-gcc4-2.0.source/gcc
>> > ../../llvm-gcc4-2.0.source/gcc/../include
>> > ../../llvm-gcc4-2.0.source/gcc/../libcpp/include
>> > /home/warren/llvm/llvm-2.0/include
>> > /home/warren/llvm/obj//include
>> > /home/warren/llvm-gcc/obj/gcc/include
>> > /usr/local/include
>> > /usr/include
>> > End of search list.
>> > GNU C version 4.0.1 LLVM (Apple Computer, Inc. build 2.0)
>> > (x86_64-unknown-linux-gnu)
>> > compiled by GNU C version 4.0.2 20050901 (prerelease) (SUSE
>> > Linux).
>> > GGC heuristics: --param ggc-min-expand=100 --param ggc-min-
>> > heapsize=131072
>> > Warning: Generation of 64-bit code for a 32-bit processor requested.
>> > Warning: 64-bit processors all have at least SSE2.
>> > Compiler executable checksum: efa2a522e5a08a9a5e39009754b845ec
>> > as --traditional-format -V -Qy --32 -o 32/crtbegin.o /tmp/ccBy56Wo.s
>> > GNU assembler version 2.16.91.0.2 (x86_64-suse-linux) using BFD
>> > version
>> > 2.16.91.0.2 20050720 (SuSE Linux)
>> > /tmp/ccBy56Wo.s: Assembler messages:
>> > /tmp/ccBy56Wo.s:15: Error: bad register name `%rsp'
>> > /tmp/ccBy56Wo.s:16: Error: bad register name `%rbp'
>> > /tmp/ccBy56Wo.s:17: Error: bad register name `%rsp'
>> > /tmp/ccBy56Wo.s:18: Error: `completed.4705(%rip)' is not a valid
>> > base/index expression
>> > /tmp/ccBy56Wo.s:21: Error: `p.4704(%rip)' is not a valid base/index
>> > expression
>> > /tmp/ccBy56Wo.s:22: Error: bad register name `%rax)'
>> > /tmp/ccBy56Wo.s:23: Error: bad register name `%rax'
>> > /tmp/ccBy56Wo.s:26: Error: `p.4704(%rip)' is not a valid base/index
>> > expression
>> > /tmp/ccBy56Wo.s:27: Error: bad register name `%rax'
>> > /tmp/ccBy56Wo.s:28: Error: `p.4704(%rip)' is not a valid base/index
>> > expression
>> > /tmp/ccBy56Wo.s:29: Error: bad register name `%rax)'
>> > /tmp/ccBy56Wo.s:30: Error: bad register name `%rax'
>> > /tmp/ccBy56Wo.s:33: Error: `completed.4705(%rip)' is not a valid
>> > base/index expression
>> > /tmp/ccBy56Wo.s:34: Error: bad register name `%rbp'
>> > /tmp/ccBy56Wo.s:35: Error: bad register name `%rbp'
>> > /tmp/ccBy56Wo.s:38: Error: bad register name `%rbp'
>> > /tmp/ccBy56Wo.s:39: Error: bad register name `%rbp'
>> > /tmp/ccBy56Wo.s:47: Error: bad register name `%rsp'
>> > /tmp/ccBy56Wo.s:48: Error: bad register name `%rbp'
>> > /tmp/ccBy56Wo.s:49: Error: bad register name `%rsp'
>> > /tmp/ccBy56Wo.s:50: Error: `__JCR_LIST__(%rip)' is not a valid
>> > base/index expression
>> > /tmp/ccBy56Wo.s:53: Error: `_Jv_RegisterClasses(%rip)' is not a valid
>> > base/index expression
>> > /tmp/ccBy56Wo.s:55: Error: bad register name `%rax'
>> > /tmp/ccBy56Wo.s:58: Error: `__JCR_LIST__(%rip)' is not a valid
>> > base/index expression
>> > /tmp/ccBy56Wo.s:59: Error: bad register name `%rax'
>> > /tmp/ccBy56Wo.s:60: Error: bad register name `%rbp'
>> > /tmp/ccBy56Wo.s:61: Error: bad register name `%rbp'
>> > /tmp/ccBy56Wo.s:64: Error: bad register name `%rbp'
>> > /tmp/ccBy56Wo.s:65: Error: bad register name `%rbp'
>> >
>> > # Start of file scope inline assembly
>> > .section .fini
>> > call __do_global_dtors_aux
>> > .text
>> > .section .init
>> > call frame_dummy
>> > .text
>> > # End of file scope inline assembly
>> >
>> >
>> > .text
>> > .align 16
>> > .type __do_global_dtors_aux, at function
>> > __do_global_dtors_aux:
>> > subq $8, %rsp
>> > movq %rbp, (%rsp)
>> > movq %rsp, %rbp
>> > cmpb $0, completed.4705(%rip)
>> > jne .LBB1_4 #UnifiedReturnBlock
>> > .LBB1_1: #bb9.preheader
>> > movq p.4704(%rip), %rax
>> > movq (%rax), %rax
>> > cmpq $0, %rax
>> > je .LBB1_3 #bb16
>> > .LBB1_2: #bb
>> > addq $4, p.4704(%rip)
>> > call *%rax
>> > movq p.4704(%rip), %rax
>> > movq (%rax), %rax
>> > cmpq $0, %rax
>> > jne .LBB1_2 #bb
>> > .LBB1_3: #bb16
>> > movb $1, completed.4705(%rip)
>> > movq %rbp, %rsp
>> > popq %rbp
>> > ret
>> > .LBB1_4: #UnifiedReturnBlock
>> > movq %rbp, %rsp
>> > popq %rbp
>> > ret
>> > .size __do_global_dtors_aux, .-__do_global_dtors_aux
>> >
>> >
>> > .align 16
>> > .type frame_dummy, at function
>> > frame_dummy:
>> > subq $8, %rsp
>> > movq %rbp, (%rsp)
>> > movq %rsp, %rbp
>> > cmpq $0, __JCR_LIST__(%rip)
>> > je .LBB2_3 #UnifiedReturnBlock
>> > .LBB2_1: #cond_true
>> > leaq _Jv_RegisterClasses(%rip), %rax
>> >
>> > cmpq $0, %rax
>> > je .LBB2_3 #UnifiedReturnBlock
>> > .LBB2_2: #cond_true10
>> > leaq __JCR_LIST__(%rip), %rdi
>> > call *%rax
>> > movq %rbp, %rsp
>> > popq %rbp
>> > ret
>> > .LBB2_3: #UnifiedReturnBlock
>> > movq %rbp, %rsp
>> > popq %rbp
>> > ret
>> > .size frame_dummy, .-frame_dummy
>> > .type __CTOR_LIST__, at object
>> > .section .ctors,"aw", at progbits
>> > .align 8
>> > __CTOR_LIST__: # __CTOR_LIST__
>> > .size __CTOR_LIST__, 8
>> > .quad 4294967295
>> >
>> > .type __DTOR_LIST__, at object
>> > .section .dtors,"aw", at progbits
>> > .align 8
>> > __DTOR_LIST__: # __DTOR_LIST__
>> > .size __DTOR_LIST__, 8
>> > .quad 4294967295
>> >
>> > .type __JCR_LIST__, at object
>> > .section .jcr
>> > .align 8
>> > __JCR_LIST__: # __JCR_LIST__
>> > .size __JCR_LIST__, 0
>> >
>> > .hidden __dso_handle
>> > .type __dso_handle, at object
>> > .globl __dso_handle
>> > .data
>> > .align 8
>> > __dso_handle: # __dso_handle
>> > .size __dso_handle, 8
>> > .zero 8
>> >
>> > .type p.4704, at object
>> > .align 8
>> > p.4704: # p.4704
>> > .size p.4704, 8
>> > .quad (__DTOR_LIST__) + 8
>> >
>> > .type completed.4705, at object
>> > .local completed.4705
>> > .comm completed.4705,1,1 # completed.4705
>> > .weak _Jv_RegisterClasses
>> >
>> > .ident "GCC: (GNU) 4.0.1 LLVM (Apple Computer, Inc. build 2.0)"
>> > _______________________________________________
>> > LLVM Developers mailing list
>> > LLVMdev at cs.uiuc.edu http://llvm.cs.uiuc.edu
>> > http://lists.cs.uiuc.edu/mailman/listinfo/llvmdev
>>
>> _______________________________________________
>> LLVM Developers mailing list
>> LLVMdev at cs.uiuc.edu http://llvm.cs.uiuc.edu
>> http://lists.cs.uiuc.edu/mailman/listinfo/llvmdev
>>
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> LLVM Developers mailing list
> LLVMdev at cs.uiuc.edu http://llvm.cs.uiuc.edu
> http://lists.cs.uiuc.edu/mailman/listinfo/llvmdev
More information about the llvm-dev
mailing list