[llvm] [Docs][RISCV] Document RISC-V vector codegen (PR #96740)

[Yingwei Zheng via llvm-commits]

================
@@ -0,0 +1,285 @@
+=========================
+ RISC-V Vector Extension
+=========================
+
+.. contents::
+   :local:
+
+The RISC-V target readily supports the 1.0 version of the `RISC-V Vector Extension (RVV) <https://github.com/riscv/riscv-v-spec/blob/v1.0/v-spec.adoc>`_, but requires some tricks to handle its unique design.
+This guide gives an overview of how RVV is modelled in LLVM IR and how the backend generates code for it.
+
+Mapping to LLVM IR types
+========================
+
+RVV adds 32 ``VLEN`` sized registers, where ``VLEN`` is an unknown constant to the compiler. To be able to represent ``VLEN`` sized values, the RISC-V backend takes the same approach as AArch64's SVE and uses `scalable vector types <https://llvm.org/docs/LangRef.html#t-vector>`_.
+
+Scalable vector types are of the form ``<vscale x n x ty>``, which indicate a vector with a multiple of ``n`` elements of type ``ty``. ``n`` and ``ty`` then end up controlling LMUL and SEW respectively.
+
+LLVM supports only ``ELEN=32`` or ``ELEN=64``, so ``vscale`` is defined as ``VLEN/64`` (see ``RISCV::RVVBitsPerBlock``).
+This makes the LLVM IR types stable between the two ``ELEN`` s considered, i.e. every LLVM IR scalable vector type has exactly one corresponding pair of element type and LMUL, and vice-versa.
+
++-------------------+---------------+----------------+------------------+-------------------+-------------------+-------------------+-------------------+
+|                   | LMUL=⅛        | LMUL=¼         | LMUL=½           | LMUL=1            | LMUL=2            | LMUL=4            | LMUL=8            |
++===================+===============+================+==================+===================+===================+===================+===================+
+| i64 (ELEN=64)     | N/A           | N/A            | N/A              | <v x 1 x i64>     | <v x 2 x i64>     | <v x 4 x i64>     | <v x 8 x i64>     |
++-------------------+---------------+----------------+------------------+-------------------+-------------------+-------------------+-------------------+
+| i32               | N/A           | N/A            | <v x 1 x i32>    | <v x 2 x i32>     | <v x 4 x i32>     | <v x 8 x i32>     | <v x 16 x i32>    |
++-------------------+---------------+----------------+------------------+-------------------+-------------------+-------------------+-------------------+
+| i16               | N/A           | <v x 1 x i16>  | <v x 2 x i16>    | <v x 4 x i16>     | <v x 8 x i16>     | <v x 16 x i16>    | <v x 32 x i16>    |
++-------------------+---------------+----------------+------------------+-------------------+-------------------+-------------------+-------------------+
+| i8                | <v x 1 x i8>  | <v x 2 x i8>   | <v x 4 x i8>     | <v x 8 x i8>      | <v x 16 x i8>     | <v x 32 x i8>     | <v x 64 x i8>     |
++-------------------+---------------+----------------+------------------+-------------------+-------------------+-------------------+-------------------+
+| double (ELEN=64)  | N/A           | N/A            | N/A              | <v x 1 x double>  | <v x 2 x double>  | <v x 4 x double>  | <v x 8 x double>  |
++-------------------+---------------+----------------+------------------+-------------------+-------------------+-------------------+-------------------+
+| float             | N/A           | N/A            | <v x 1 x float>  | <v x 2 x float>   | <v x 4 x float>   | <v x 8 x float>   | <v x 16 x float>  |
++-------------------+---------------+----------------+------------------+-------------------+-------------------+-------------------+-------------------+
+| half              | N/A           | <v x 1 x half> | <v x 2 x half>   | <v x 4 x half>    | <v x 8 x half>    | <v x 16 x half>   | <v x 32 x half>   |
++-------------------+---------------+----------------+------------------+-------------------+-------------------+-------------------+-------------------+
+
+(Read ``<v x k x ty>`` as ``<vscale x k x ty>``)
+
+
+Mask vector types
+-----------------
+
+As for mask vectors, they are physically represented using a layout of densely packed bits in a vector register.
+They are mapped to the following LLVM IR types:
+
+- <vscale x 1 x i1>
+- <vscale x 2 x i1>
+- <vscale x 4 x i1>
+- <vscale x 8 x i1>
+- <vscale x 16 x i1>
+- <vscale x 32 x i1>
+- <vscale x 64 x i1>
+
+Two types with the same ratio SEW/LMUL will have the same related mask type. For instance, two different comparisons one under SEW=64, LMUL=2 and the other under SEW=32, LMUL=1 will both generate a mask <vscale x 2 x i1>.
+
+Representation in LLVM IR
+=========================
+
+Vector instructions can be represented in three main ways in LLVM IR:
+
+1. Regular instructions on both fixed and scalable vector types
+
+   .. code-block:: llvm
+
+       %c = add <vscale x 4 x i32> %a, %b
+
+2. RISC-V vector intrinsics, which mirror the `C intrinsics specification <https://github.com/riscv-non-isa/rvv-intrinsic-doc>`_
+
+   These come in unmasked variants:
+
+   .. code-block:: llvm
+
+       %c = call @llvm.riscv.vadd.nxv4i32.nxv4i32(
+              <vscale x 4 x i32> %passthru,
+	      <vscale x 4 x i32> %a,
+	      <vscale x 4 x i32> %b,
+	      i64 %avl
+	    )
+
+   As well as masked variants:
+
+   .. code-block:: llvm
+
+       %c = call @llvm.riscv.vadd.nxv4i32.nxv4i32(
+              <vscale x 4 x i32> %passthru,
+	      <vscale x 4 x i32> %a,
+	      <vscale x 4 x i32> %b,
+	      i64 %avl
+	    )
+
+   Both allow setting the AVL as well as controlling the inactive/tail elements via the passthru operand, but the masked variant also provides operands for the mask and ``vta``/``vma`` policy bits.
+
+   The only valid types are scalable vector types.
+
+3. :doc:`Vector predication (VP) intrinsics </Proposals/VectorPredication>`
+
+   .. code-block:: llvm
+
+       %c = call @llvm.vp.add.nxv4i32(
+	      <vscale x 4 x i32> %a,
+	      <vscale x 4 x i32> %b,
+	      <vscale x 4 x i1> %m
+	      i32 %evl
+	    )
+
+   Unlike RISC-V intrinsics, VP intrinsics are target agnostic so they can be emitted from other optimisation passes in the middle-end (like the loop vectorizer). They also support fixed length vector types.
+
+SelectionDAG lowering
+=====================
+
+For regular **scalable** vector LLVM IR instructions, their corresponding SelectionDAG nodes are legal on RISC-V and don't require any custom lowering.
+
+.. code-block::
+
+   t5: nxv4i32 = add t2, t4
+
+RISC-V vector intrinsics are also always scalable and so don't need custom lowering:
+
+.. code-block::
+
+   t12: nxv4i32 = llvm.riscv.vadd TargetConstant:i64<10056>, undef:nxv4i32, t2, t4, t6
+
+Fixed length vectors
+--------------------
+
+The only legal vector MVTs on RISC-V are scalable, so fixed length vectors need to be custom lowered and performed in a scalable container type:
+
+1. The fixed length vector operands are inserted into scalable containers via ``insert_subvector``. The container size is chosen to have a minimum size big enough to fit the fixed length vector (see ``getContainerForFixedLengthVector``).
+2. The operation is then performed via a scalable **VL (vector length) node**. These are custom nodes that contain an AVL operand which is set to the size of the fixed length vector, and are defined in RISCVInstrInfoVVLPatterns.td.
+3. The result is put back into a fixed length vector via ``extract_subvector``.
+
+.. code-block::
+
+   t2: nxv2i32,ch = CopyFromReg t0, Register:nxv2i32 %0
+     t4: v4i32 = extract_subvector t2, Constant:i64<0>
+       t6: nxv2i32,ch = CopyFromReg t0, Register:nxv2i32 %1
+     t7: v4i32 = extract_subvector t6, Constant:i64<0>
+   t8: v4i32 = add t4, t7
+
+   // custom lowered to:
+
+       t2: nxv2i32,ch = CopyFromReg t0, Register:nxv2i32 %0
+       t6: nxv2i32,ch = CopyFromReg t0, Register:nxv2i32 %1
+       t15: nxv2i1 = RISCVISD::VMSET_VL Constant:i64<4>
+     t16: nxv2i32 = RISCVISD::ADD_VL t2, t6, undef:nxv2i32, t15, Constant:i64<4>
+   t17: v4i32 = extract_subvector t16, Constant:i64<0>
+
+VL nodes often have a passthru or mask operand, which are usually set to undef and all ones for fixed length vectors.
+
+The ``insert_subvector`` and ``extract_subvector`` nodes responsible for wrapping and unwrapping will get combined away, and eventually we will lower all fixed vector types to scalable. Note that the vectors at the interface of a function are always scalable vectors.
+
+.. note::
+
+   The only ``insert_subvector`` and ``extract_subvector`` nodes that make it through lowering are those that can be performed as an exact subregister insert or extract. This means that any fixed length vector ``insert_subvector`` and ``extract_subvector`` nodes that aren't legalized must lie on a register group boundary, so the exact ``VLEN`` must be known at compile time (i.e. compiled with ``-mrvv-vector-bits=zvl`` or ``-mllvm -riscv-v-vector-bits-max=VLEN``, or have an exact ``vscale_range`` attribute).
+
+Vector predication intrinsics
+-----------------------------
+
+VP intrinsics also get custom lowered via VL nodes in order to set the EVL and mask.
+
+.. code-block::
+
+   t12: nxv2i32 = vp_add t2, t4, t6, Constant:i64<8>
+
+   // custom lowered to:
+
+   t18: nxv2i32 = RISCVISD::ADD_VL t2, t4, undef:nxv2i32, t6, Constant:i64<8>
----------------
dtcxzyw wrote:

Can you explain the meaning of `undef:nxv2i32` here?


https://github.com/llvm/llvm-project/pull/96740