[llvm] [SimplifyCFG] More accurate use legality check for sinking (PR #94462)
Nikita Popov via llvm-commits
llvm-commits at lists.llvm.org
Wed Jun 5 05:01:03 PDT 2024
https://github.com/nikic created https://github.com/llvm/llvm-project/pull/94462
When sinking instructions, we have to make sure that the uses of that instruction are consistent: If used in a phi node in the sink target, then the phi operands have to match the sink candidates. This allows the phi to be removed when the instruction is sunk. This case is already handled accurately.
However, what the current code doesn't handle are uses in the same block. These are just unconditionally accepted, even though this needs the same consistency check for the phi node that sinking the using instruction would introduce.
Instead, the code has another check when actually performing the sinking, which repeats the phi check (just at a later time, where all the later instructions have already been sunk and any new phis introduced).
This is problematic, because it messes up the profitability heuristic. The code will think that certain instructions will get sunk, but they actually won't. This may result in more phi nodes being created than is considered profitable. See the changed test for a case where we no longer do this after this patch.
The new approach makes sure that the uses are consistent during the initial legality check. This is based on PhiOperands, which we already collect.
The primary motivation for this is to generalize sinking to support more than one use, and doing that generalization is hard with the current split checking approach.
>From 8249669263929e413f12c56dc132fe0b13745481 Mon Sep 17 00:00:00 2001
From: Nikita Popov <npopov at redhat.com>
Date: Wed, 5 Jun 2024 10:01:51 +0200
Subject: [PATCH] [SimplifyCFG] More accurate use legality check for sinking
When sinking instructions, we have to make sure that the uses of
that instruction are consistent: If used in a phi node in the
sink target, then the phi operands have to match the sink
candidates. This allows the phi to be removed when the instruction
is sunk. This case is already handled accurately.
However, what the current code doesn't handle are uses in the same
block. These are just unconditionally accepted, even though this
needs the same consistency check for the phi node that sinking
the using instruction would introduce.
Instead, the code has another check when actually performing the
sinking, which repeats the phi check (just at a later time,
where all the later instructions have already been sunk and any
new phis introduced).
This is problematic, because it messes up the profitability
heuristic. The code will think that certain instructions will get
sunk, but they actually won't. This may result in more phi nodes
being created than is considered profitable. See the changed test
for a case where we no longer do this after this patch.
The new approach makes sure that the uses are consistent during
the initial legality check. This is based on PhiOperands, which
we already collect.
The primary motivation for this is to generalize sinking to
support more than one use, and doing that generalization is
hard with the current split checking approach.
---
llvm/lib/Transforms/Utils/SimplifyCFG.cpp | 87 ++++++++-----------
.../SimplifyCFG/X86/sink-common-code.ll | 8 +-
2 files changed, 41 insertions(+), 54 deletions(-)
diff --git a/llvm/lib/Transforms/Utils/SimplifyCFG.cpp b/llvm/lib/Transforms/Utils/SimplifyCFG.cpp
index fe6ec8819ff99..b7f60928e81d7 100644
--- a/llvm/lib/Transforms/Utils/SimplifyCFG.cpp
+++ b/llvm/lib/Transforms/Utils/SimplifyCFG.cpp
@@ -1930,7 +1930,7 @@ static bool replacingOperandWithVariableIsCheap(const Instruction *I,
// PHI node (because an operand varies in each input block), add to PHIOperands.
static bool canSinkInstructions(
ArrayRef<Instruction *> Insts,
- DenseMap<Instruction *, SmallVector<Value *, 4>> &PHIOperands) {
+ DenseMap<const Use *, SmallVector<Value *, 4>> &PHIOperands) {
// Prune out obviously bad instructions to move. Each instruction must have
// exactly zero or one use, and we check later that use is by a single, common
// PHI instruction in the successor.
@@ -1981,21 +1981,19 @@ static bool canSinkInstructions(
return false;
}
- // All instructions in Insts are known to be the same opcode. If they have a
- // use, check that the only user is a PHI or in the same block as the
- // instruction, because if a user is in the same block as an instruction we're
- // contemplating sinking, it must already be determined to be sinkable.
+ // Uses must be consistent: If I0 is used in a phi node in the sink target,
+ // then the other phi operands must match the instructions from Insts. This
+ // also has to hold true for any phi nodes that would be created as a result
+ // of sinking. Both of these cases are represented by PhiOperands.
if (HasUse) {
- auto *PNUse = dyn_cast<PHINode>(*I0->user_begin());
- auto *Succ = I0->getParent()->getTerminator()->getSuccessor(0);
- if (!all_of(Insts, [&PNUse,&Succ](const Instruction *I) -> bool {
- auto *U = cast<Instruction>(*I->user_begin());
- return (PNUse &&
- PNUse->getParent() == Succ &&
- PNUse->getIncomingValueForBlock(I->getParent()) == I) ||
- U->getParent() == I->getParent();
- }))
+ const Use &U = *I0->use_begin();
+ auto It = PHIOperands.find(&U);
+ if (It == PHIOperands.end())
+ // There may be uses in other blocks when sinking into a loop header.
return false;
+ for (auto [I1, I2] : zip(Insts, It->second))
+ if (I1 != I2)
+ return false;
}
// Because SROA can't handle speculating stores of selects, try not to sink
@@ -2061,8 +2059,9 @@ static bool canSinkInstructions(
!canReplaceOperandWithVariable(I0, OI))
// We can't create a PHI from this GEP.
return false;
+ auto &Ops = PHIOperands[&I0->getOperandUse(OI)];
for (auto *I : Insts)
- PHIOperands[I].push_back(I->getOperand(OI));
+ Ops.push_back(I->getOperand(OI));
}
}
return true;
@@ -2071,7 +2070,7 @@ static bool canSinkInstructions(
// Assuming canSinkInstructions(Blocks) has returned true, sink the last
// instruction of every block in Blocks to their common successor, commoning
// into one instruction.
-static bool sinkLastInstruction(ArrayRef<BasicBlock*> Blocks) {
+static void sinkLastInstruction(ArrayRef<BasicBlock*> Blocks) {
auto *BBEnd = Blocks[0]->getTerminator()->getSuccessor(0);
// canSinkInstructions returning true guarantees that every block has at
@@ -2086,23 +2085,10 @@ static bool sinkLastInstruction(ArrayRef<BasicBlock*> Blocks) {
Insts.push_back(I);
}
- // The only checking we need to do now is that all users of all instructions
- // are the same PHI node. canSinkInstructions should have checked this but
- // it is slightly over-aggressive - it gets confused by commutative
- // instructions so double-check it here.
- Instruction *I0 = Insts.front();
- if (!I0->user_empty()) {
- auto *PNUse = dyn_cast<PHINode>(*I0->user_begin());
- if (!all_of(Insts, [&PNUse](const Instruction *I) -> bool {
- auto *U = cast<Instruction>(*I->user_begin());
- return U == PNUse;
- }))
- return false;
- }
-
// We don't need to do any more checking here; canSinkInstructions should
// have done it all for us.
SmallVector<Value*, 4> NewOperands;
+ Instruction *I0 = Insts.front();
for (unsigned O = 0, E = I0->getNumOperands(); O != E; ++O) {
// This check is different to that in canSinkInstructions. There, we
// cared about the global view once simplifycfg (and instcombine) have
@@ -2170,8 +2156,6 @@ static bool sinkLastInstruction(ArrayRef<BasicBlock*> Blocks) {
I->replaceAllUsesWith(I0);
I->eraseFromParent();
}
-
- return true;
}
namespace {
@@ -2312,9 +2296,19 @@ static bool SinkCommonCodeFromPredecessors(BasicBlock *BB,
// carry on. If we can sink an instruction but need to PHI-merge some operands
// (because they're not identical in each instruction) we add these to
// PHIOperands.
+ // We prepopulate PHIOperands with the phis that already exist in BB.
+ DenseMap<const Use *, SmallVector<Value *, 4>> PHIOperands;
+ for (PHINode &PN : BB->phis()) {
+ SmallDenseMap<BasicBlock *, const Use *, 4> IncomingVals;
+ for (const Use &U : PN.incoming_values())
+ IncomingVals.insert({PN.getIncomingBlock(U), &U});
+ auto &Ops = PHIOperands[IncomingVals[UnconditionalPreds[0]]];
+ for (BasicBlock *Pred : UnconditionalPreds)
+ Ops.push_back(*IncomingVals[Pred]);
+ }
+
int ScanIdx = 0;
SmallPtrSet<Value*,4> InstructionsToSink;
- DenseMap<Instruction*, SmallVector<Value*,4>> PHIOperands;
LockstepReverseIterator LRI(UnconditionalPreds);
while (LRI.isValid() &&
canSinkInstructions(*LRI, PHIOperands)) {
@@ -2336,20 +2330,19 @@ static bool SinkCommonCodeFromPredecessors(BasicBlock *BB,
// actually sink before encountering instruction that is unprofitable to
// sink?
auto ProfitableToSinkInstruction = [&](LockstepReverseIterator &LRI) {
- unsigned NumPHIdValues = 0;
- for (auto *I : *LRI)
- for (auto *V : PHIOperands[I]) {
- if (!InstructionsToSink.contains(V))
- ++NumPHIdValues;
+ unsigned NumPHIInsts = 0;
+ for (Use &U : (*LRI)[0]->operands()) {
+ auto It = PHIOperands.find(&U);
+ if (It != PHIOperands.end() && !all_of(It->second, [&](Value *V) {
+ return InstructionsToSink.contains(V);
+ })) {
+ ++NumPHIInsts;
// FIXME: this check is overly optimistic. We may end up not sinking
// said instruction, due to the very same profitability check.
// See @creating_too_many_phis in sink-common-code.ll.
}
- LLVM_DEBUG(dbgs() << "SINK: #phid values: " << NumPHIdValues << "\n");
- unsigned NumPHIInsts = NumPHIdValues / UnconditionalPreds.size();
- if ((NumPHIdValues % UnconditionalPreds.size()) != 0)
- NumPHIInsts++;
-
+ }
+ LLVM_DEBUG(dbgs() << "SINK: #phi insts: " << NumPHIInsts << "\n");
return NumPHIInsts <= 1;
};
@@ -2474,13 +2467,7 @@ static bool SinkCommonCodeFromPredecessors(BasicBlock *BB,
// sink is always at index 0.
LRI.reset();
- if (!sinkLastInstruction(UnconditionalPreds)) {
- LLVM_DEBUG(
- dbgs()
- << "SINK: stopping here, failed to actually sink instruction!\n");
- break;
- }
-
+ sinkLastInstruction(UnconditionalPreds);
NumSinkCommonInstrs++;
Changed = true;
}
diff --git a/llvm/test/Transforms/SimplifyCFG/X86/sink-common-code.ll b/llvm/test/Transforms/SimplifyCFG/X86/sink-common-code.ll
index 118372164c1f9..b67ee63036848 100644
--- a/llvm/test/Transforms/SimplifyCFG/X86/sink-common-code.ll
+++ b/llvm/test/Transforms/SimplifyCFG/X86/sink-common-code.ll
@@ -568,16 +568,16 @@ define zeroext i1 @test_crash(i1 zeroext %flag, ptr %i4, ptr %m, ptr %n) {
; CHECK-NEXT: br i1 [[FLAG:%.*]], label [[IF_THEN:%.*]], label [[IF_ELSE:%.*]]
; CHECK: if.then:
; CHECK-NEXT: [[TMP1:%.*]] = load i32, ptr [[I4:%.*]], align 4
+; CHECK-NEXT: [[TMP2:%.*]] = add i32 [[TMP1]], -1
; CHECK-NEXT: br label [[IF_END:%.*]]
; CHECK: if.else:
; CHECK-NEXT: [[TMP3:%.*]] = load i32, ptr [[M:%.*]], align 4
; CHECK-NEXT: [[TMP4:%.*]] = load i32, ptr [[N:%.*]], align 4
+; CHECK-NEXT: [[TMP5:%.*]] = add i32 [[TMP3]], [[TMP4]]
; CHECK-NEXT: br label [[IF_END]]
; CHECK: if.end:
-; CHECK-NEXT: [[TMP4_SINK:%.*]] = phi i32 [ [[TMP4]], [[IF_ELSE]] ], [ -1, [[IF_THEN]] ]
-; CHECK-NEXT: [[TMP3_SINK:%.*]] = phi i32 [ [[TMP3]], [[IF_ELSE]] ], [ [[TMP1]], [[IF_THEN]] ]
-; CHECK-NEXT: [[TMP5:%.*]] = add i32 [[TMP3_SINK]], [[TMP4_SINK]]
-; CHECK-NEXT: store i32 [[TMP5]], ptr [[I4]], align 4
+; CHECK-NEXT: [[TMP5_SINK:%.*]] = phi i32 [ [[TMP5]], [[IF_ELSE]] ], [ [[TMP2]], [[IF_THEN]] ]
+; CHECK-NEXT: store i32 [[TMP5_SINK]], ptr [[I4]], align 4
; CHECK-NEXT: ret i1 true
;
entry:
More information about the llvm-commits
mailing list