[llvm] r369778 - [DebugInfo] Remove invalidated locations during LiveDebugValues
Jeremy Morse via llvm-commits
llvm-commits at lists.llvm.org
Fri Aug 23 09:33:42 PDT 2019
Author: jmorse
Date: Fri Aug 23 09:33:42 2019
New Revision: 369778
URL: http://llvm.org/viewvc/llvm-project?rev=369778&view=rev
Log:
[DebugInfo] Remove invalidated locations during LiveDebugValues
LiveDebugValues gives variable locations to blocks, but it should also take
away. There are various circumstances where a variable location is known
until a loop backedge with a different location is detected. In those
circumstances, where there's no agreement on the variable location, it
should be undef / removed, otherwise we end up picking a location that's
valid on some loop iterations but not others.
However, LiveDebugValues doesn't currently do this, see the new testcase
attached. Without this patch, the location of !3 is assumed to be %bar
through the loop. Once it's added to the In-Locations list, it's never
removed, even though the later dbg.value(0... of !3 makes the location
un-knowable.
This patch checks during block-location-joining to see whether any
previously-present locations have been removed in a predecessor. If they
have, the live-ins have changed, and the block needs reprocessing.
Similarly, in transferTerminator, assign rather than |= the Out-Locations
after processing a block, as we may have deleted some previously valid
locations. This will mean that LiveDebugValues performs more propagation
-- but that's necessary for it being correct.
Differential Revision: https://reviews.llvm.org/D66599
Added:
llvm/trunk/test/DebugInfo/X86/live-debug-values-remove-range.ll
Modified:
llvm/trunk/lib/CodeGen/LiveDebugValues.cpp
llvm/trunk/test/DebugInfo/COFF/pieces.ll
llvm/trunk/test/DebugInfo/X86/fission-ranges.ll
Modified: llvm/trunk/lib/CodeGen/LiveDebugValues.cpp
URL: http://llvm.org/viewvc/llvm-project/llvm/trunk/lib/CodeGen/LiveDebugValues.cpp?rev=369778&r1=369777&r2=369778&view=diff
==============================================================================
--- llvm/trunk/lib/CodeGen/LiveDebugValues.cpp (original)
+++ llvm/trunk/lib/CodeGen/LiveDebugValues.cpp Fri Aug 23 09:33:42 2019
@@ -77,6 +77,7 @@ using namespace llvm;
#define DEBUG_TYPE "livedebugvalues"
STATISTIC(NumInserted, "Number of DBG_VALUE instructions inserted");
+STATISTIC(NumRemoved, "Number of DBG_VALUE instructions removed");
// If @MI is a DBG_VALUE with debug value described by a defined
// register, returns the number of this register. In the other case, returns 0.
@@ -942,7 +943,7 @@ bool LiveDebugValues::transferTerminator
VarLocIDs[ID].dump();
});
VarLocSet &VLS = OutLocs[CurMBB];
- Changed = VLS |= OpenRanges.getVarLocs();
+ Changed = VLS != OpenRanges.getVarLocs();
// New OutLocs set may be different due to spill, restore or register
// copy instruction processing.
if (Changed)
@@ -1101,8 +1102,6 @@ bool LiveDebugValues::join(
// is the entry block which has no predecessor.
assert((NumVisited || MBB.pred_empty()) &&
"Should have processed at least one predecessor");
- if (InLocsT.empty())
- return false;
VarLocSet &ILS = InLocs[&MBB];
VarLocSet &Pending = PendingInLocs[&MBB];
@@ -1118,6 +1117,19 @@ bool LiveDebugValues::join(
++NumInserted;
Changed = true;
}
+
+ // We may have lost locations by learning about a predecessor that either
+ // loses or moves a variable. Find any locations in ILS that are not in the
+ // new in-locations, and delete those.
+ VarLocSet Removed = ILS;
+ Removed.intersectWithComplement(InLocsT);
+ for (auto ID : Removed) {
+ Pending.reset(ID);
+ ILS.reset(ID);
+ ++NumRemoved;
+ Changed = true;
+ }
+
return Changed;
}
Modified: llvm/trunk/test/DebugInfo/COFF/pieces.ll
URL: http://llvm.org/viewvc/llvm-project/llvm/trunk/test/DebugInfo/COFF/pieces.ll?rev=369778&r1=369777&r2=369778&view=diff
==============================================================================
--- llvm/trunk/test/DebugInfo/COFF/pieces.ll (original)
+++ llvm/trunk/test/DebugInfo/COFF/pieces.ll Fri Aug 23 09:33:42 2019
@@ -43,7 +43,6 @@
; ASM: [[oy_ox_start:\.Ltmp[0-9]+]]:
; ASM: .p2align 4, 0x90
; ASM: .LBB0_3: # %for.body
-; ASM: #DEBUG_VALUE: loop_csr:o <- [DW_OP_LLVM_fragment 0 32] 0
; ASM: #DEBUG_VALUE: loop_csr:o <- [DW_OP_LLVM_fragment 0 32] $edi
; ASM: #DEBUG_VALUE: loop_csr:o <- [DW_OP_LLVM_fragment 32 32] $esi
; ASM: .cv_loc 0 1 13 11 # t.c:13:11
Modified: llvm/trunk/test/DebugInfo/X86/fission-ranges.ll
URL: http://llvm.org/viewvc/llvm-project/llvm/trunk/test/DebugInfo/X86/fission-ranges.ll?rev=369778&r1=369777&r2=369778&view=diff
==============================================================================
--- llvm/trunk/test/DebugInfo/X86/fission-ranges.ll (original)
+++ llvm/trunk/test/DebugInfo/X86/fission-ranges.ll Fri Aug 23 09:33:42 2019
@@ -45,7 +45,7 @@
; if they've changed due to a bugfix, change in register allocation, etc.
; CHECK: [[A]]:
-; CHECK-NEXT: Addr idx 2 (w/ length 169): DW_OP_consts +0, DW_OP_stack_value
+; CHECK-NEXT: Addr idx 2 (w/ length 15): DW_OP_consts +0, DW_OP_stack_value
; CHECK-NEXT: Addr idx 3 (w/ length 15): DW_OP_reg0 RAX
; CHECK-NEXT: Addr idx 4 (w/ length 18): DW_OP_breg7 RSP-8
; CHECK: [[E]]:
Added: llvm/trunk/test/DebugInfo/X86/live-debug-values-remove-range.ll
URL: http://llvm.org/viewvc/llvm-project/llvm/trunk/test/DebugInfo/X86/live-debug-values-remove-range.ll?rev=369778&view=auto
==============================================================================
--- llvm/trunk/test/DebugInfo/X86/live-debug-values-remove-range.ll (added)
+++ llvm/trunk/test/DebugInfo/X86/live-debug-values-remove-range.ll Fri Aug 23 09:33:42 2019
@@ -0,0 +1,49 @@
+; RUN: llc -mtriple=x86_64-unknown-unknown %s -o - -stop-after=livedebugvalues | FileCheck %s
+;
+; In the simple loop below, the location of the variable "toast" is %bar in
+; the entry block, then set to constant zero at the end of the loop. We cannot
+; know the location of "toast" at the start of the %loop block. Test that no
+; location is given until after the call to @booler.
+;
+; CHECK: ![[VARNUM:[0-9]+]] = !DILocalVariable(name: "toast"
+;
+; CHECK-LABEL: bb.1.loop
+; CHECK-NOT: DBG_VALUE
+; CHECK-LABEL: CALL64pcrel32 @booler
+; CHECK: DBG_VALUE 0, $noreg, ![[VARNUM]]
+
+declare i1 @booler()
+declare void @escape(i32)
+declare void @llvm.dbg.value(metadata, metadata, metadata)
+ at glob = global i32 0
+
+define i32 @foo(i32 %bar) !dbg !4 {
+entry:
+ call void @llvm.dbg.value(metadata i32 %bar, metadata !3, metadata !DIExpression()), !dbg !6
+ br label %loop
+loop:
+ call void @escape(i32 %bar)
+ %retval = call i1 @booler(), !dbg !6
+ call void @llvm.dbg.value(metadata i32 0, metadata !3, metadata !DIExpression()), !dbg !6
+ br i1 %retval, label %loop2, label %exit
+loop2:
+ store i32 %bar, i32 *@glob
+ br label %loop
+exit:
+ ret i32 %bar
+}
+
+!llvm.module.flags = !{!0, !100}
+!llvm.dbg.cu = !{!1}
+
+!100 = !{i32 2, !"Dwarf Version", i32 4}
+!0 = !{i32 2, !"Debug Info Version", i32 3}
+!1 = distinct !DICompileUnit(language: DW_LANG_C_plus_plus, file: !2, producer: "beards", isOptimized: true, runtimeVersion: 0, emissionKind: FullDebug)
+!2 = !DIFile(filename: "bees.cpp", directory: ".")
+!3 = !DILocalVariable(name: "toast", scope: !4, file: !2, line: 1, type: !16)
+!4 = distinct !DISubprogram(name: "nope", scope: !2, file: !2, line: 1, spFlags: DISPFlagDefinition, unit: !1, retainedNodes: !13, type: !14, isDefinition: true)
+!6 = !DILocation(line: 1, scope: !4)
+!13 = !{!3}
+!14 = !DISubroutineType(types: !15)
+!15 = !{!16}
+!16 = !DIBasicType(name: "int", size: 32, align: 32, encoding: DW_ATE_signed)
More information about the llvm-commits
mailing list