[llvm] r347289 - Recommit "[LoopSimplifyCFG] Teach LoopSimplifyCFG to constant-fold branches and switches"
Mikael Holmén via llvm-commits
llvm-commits at lists.llvm.org
Fri Nov 23 00:36:24 PST 2018
Hi again,
This starts failing with r347289 and still fails on trunk now with r347484:
opt -S -o - bbi-21358.ll -jump-threading -loop-simplifycfg
It gives me
PHINode should have one entry for each predecessor of its parent basic
block!
%c.1 = phi i16 [ undef, %for.cond ], [ undef, %if.then ], [ undef,
%if.then ]
in function f1
LLVM ERROR: Broken function found, compilation aborted!
But I wonder if this is a bug in jump-threading that now just got
exposed with your change for some reason?
After jump-threading we have this:
if.then: ; preds = %for.cond
%0 = load i16, i16* @a, align 1
%tobool = icmp ne i16 %0, 0
br i1 %tobool, label %for.inc, label %for.inc
for.inc: ; preds = %if.then,
%if.then, %for.cond
%c.1 = phi i16 [ undef, %for.cond ], [ undef, %if.then ], [ undef,
%if.then ]
br label %for.cond
Is that phi ok with %if.then appearing two times?
If I run just
-jump-threading -verify
or
-jump-threading -verify-loop-info
it passes but with
-jump-threading -loop-simplifycfg
it fails.
/Mikael
On 11/23/18 9:13 AM, Mikael Holmén wrote:
> Hi,
>
> Yep I just verified that my bbi-21357.ll case doesn't hit the assertion
> anymore.
>
> I'll see what happens with the other suspected cases as well.
>
> Thanks!
> /Mikael
>
> On 11/23/18 9:10 AM, Maxim Kazantsev wrote:
>> On my side it passed with the patch. Seems the same problem found by
>> Dave earlier. Fixed now.
>>
>> --Max
>>
>> -----Original Message-----
>> From: Maxim Kazantsev
>> Sent: Friday, November 23, 2018 3:00 PM
>> To: 'Mikael Holmén' <mikael.holmen at ericsson.com>
>> Cc: llvm-commits at lists.llvm.org
>> Subject: RE: [llvm] r347289 - Recommit "[LoopSimplifyCFG] Teach
>> LoopSimplifyCFG to constant-fold branches and switches"
>>
>> Hi Mikael,
>>
>> I've just merged https://reviews.llvm.org/rL347484, could you please
>> check if it helps?
>>
>> --Max
>>
>> -----Original Message-----
>> From: Mikael Holmén <mikael.holmen at ericsson.com>
>> Sent: Friday, November 23, 2018 2:42 PM
>> To: Maxim Kazantsev <max.kazantsev at azul.com>
>> Cc: llvm-commits at lists.llvm.org
>> Subject: Re: [llvm] r347289 - Recommit "[LoopSimplifyCFG] Teach
>> LoopSimplifyCFG to constant-fold branches and switches"
>>
>> Hi Max,
>>
>> With this commit the following starts crashing:
>>
>> opt -o /dev/null bbi-21357.ll -loop-simplifycfg -loop-deletion
>>
>> I get:
>>
>> opt: ../lib/Transforms/Scalar/LoopDeletion.cpp:138: LoopDeletionResult
>> deleteLoopIfDead(llvm::Loop *, llvm::DominatorTree &,
>> llvm::ScalarEvolution &, llvm::LoopInfo &): Assertion
>> `L->isLCSSAForm(DT) && "Expected LCSSA!"' failed.
>> Stack dump:
>> 0. Program arguments: build-all/bin/opt -o /dev/null bbi-21357.ll
>> -loop-simplifycfg -loop-deletion
>> 1. Running pass 'Function Pass Manager' on module 'bbi-21357.ll'.
>> 2. Running pass 'Loop Pass Manager' on function '@f1'
>> 3. Running pass 'Delete dead loops' on basic block '%bb1'
>> #0 0x00000000021e8eb4 PrintStackTraceSignalHandler(void*)
>> (build-all/bin/opt+0x21e8eb4)
>> #1 0x00000000021e6fe0 llvm::sys::RunSignalHandlers()
>> (build-all/bin/opt+0x21e6fe0)
>> #2 0x00000000021e9218 SignalHandler(int) (build-all/bin/opt+0x21e9218)
>> #3 0x00007f6880ec6330 __restore_rt
>> (/lib/x86_64-linux-gnu/libpthread.so.0+0x10330)
>> #4 0x00007f687fab5c37 gsignal
>> /build/eglibc-ripdx6/eglibc-2.19/signal/../nptl/sysdeps/unix/sysv/linux/raise.c:56:0
>>
>> #5 0x00007f687fab9028 abort
>> /build/eglibc-ripdx6/eglibc-2.19/stdlib/abort.c:91:0
>> #6 0x00007f687faaebf6 __assert_fail_base
>> /build/eglibc-ripdx6/eglibc-2.19/assert/assert.c:92:0
>> #7 0x00007f687faaeca2 (/lib/x86_64-linux-gnu/libc.so.6+0x2fca2)
>> #8 0x0000000001ffa3a4 deleteLoopIfDead(llvm::Loop*,
>> llvm::DominatorTree&, llvm::ScalarEvolution&, llvm::LoopInfo&)
>> (build-all/bin/opt+0x1ffa3a4)
>> #9 0x0000000001ffa8b6 (anonymous
>> namespace)::LoopDeletionLegacyPass::runOnLoop(llvm::Loop*,
>> llvm::LPPassManager&) (build-all/bin/opt+0x1ffa8b6)
>> #10 0x000000000167a58c
>> llvm::LPPassManager::runOnFunction(llvm::Function&)
>> (build-all/bin/opt+0x167a58c)
>> #11 0x0000000001c0797d
>> llvm::FPPassManager::runOnFunction(llvm::Function&)
>> (build-all/bin/opt+0x1c0797d)
>> #12 0x0000000001c07c38 llvm::FPPassManager::runOnModule(llvm::Module&)
>> (build-all/bin/opt+0x1c07c38)
>> #13 0x0000000001c0809a llvm::legacy::PassManagerImpl::run(llvm::Module&)
>> (build-all/bin/opt+0x1c0809a)
>> #14 0x000000000077b08b main (build-all/bin/opt+0x77b08b)
>> #15 0x00007f687faa0f45 __libc_start_main
>> /build/eglibc-ripdx6/eglibc-2.19/csu/libc-start.c:321:0
>> #16 0x00000000007605fd _start (build-all/bin/opt+0x7605fd)
>>
>> I've seen a couple of other failures too recently, e.g.
>>
>> PHINode should have one entry for each predecessor of its parent
>> basic block!
>>
>> and also
>>
>> opt: ../lib/Transforms/Scalar/IndVarSimplify.cpp:2585: bool (anonymous
>> namespace)::IndVarSimplify::run(llvm::Loop *): Assertion
>> `L->isRecursivelyLCSSAForm(*DT, *LI) && "LCSSA required to run
>> indvars!"' failed."
>>
>> but I haven't reduced and really verified they are due to this commit
>> yet.
>>
>> /Mikael
>>
>> On 11/20/18 6:43 AM, Max Kazantsev via llvm-commits wrote:
>>> Author: mkazantsev
>>> Date: Mon Nov 19 21:43:32 2018
>>> New Revision: 347289
>>>
>>> URL: http://llvm.org/viewvc/llvm-project?rev=347289&view=rev
>>> Log:
>>> Recommit "[LoopSimplifyCFG] Teach LoopSimplifyCFG to constant-fold
>>> branches and switches"
>>>
>>> The initial version of patch lacked Phi nodes updates in destinations
>>> of removed edges. This version contains this update and tests on this
>>> situation.
>>>
>>> Differential Revision: https://reviews.llvm.org/D54021
>>>
>>> Modified:
>>> llvm/trunk/lib/Transforms/Scalar/LoopSimplifyCFG.cpp
>>> llvm/trunk/test/Transforms/LoopSimplifyCFG/constant-fold-branch.ll
>>>
>>> Modified: llvm/trunk/lib/Transforms/Scalar/LoopSimplifyCFG.cpp
>>> URL:
>>> http://llvm.org/viewvc/llvm-project/llvm/trunk/lib/Transforms/Scalar/L
>>> oopSimplifyCFG.cpp?rev=347289&r1=347288&r2=347289&view=diff
>>> ======================================================================
>>> ========
>>> --- llvm/trunk/lib/Transforms/Scalar/LoopSimplifyCFG.cpp (original)
>>> +++ llvm/trunk/lib/Transforms/Scalar/LoopSimplifyCFG.cpp Mon Nov 19
>>> +++ 21:43:32 2018
>>> @@ -41,6 +41,318 @@ using namespace llvm;
>>> #define DEBUG_TYPE "loop-simplifycfg"
>>> +STATISTIC(NumTerminatorsFolded,
>>> + "Number of terminators folded to unconditional branches");
>>> +
>>> +/// If \p BB is a switch or a conditional branch, but only one of its
>>> +successors /// can be reached from this block in runtime, return this
>>> +successor. Otherwise, /// return nullptr.
>>> +static BasicBlock *getOnlyLiveSuccessor(BasicBlock *BB) {
>>> + Instruction *TI = BB->getTerminator();
>>> + if (BranchInst *BI = dyn_cast<BranchInst>(TI)) {
>>> + if (BI->isUnconditional())
>>> + return nullptr;
>>> + if (BI->getSuccessor(0) == BI->getSuccessor(1))
>>> + return BI->getSuccessor(0);
>>> + ConstantInt *Cond = dyn_cast<ConstantInt>(BI->getCondition());
>>> + if (!Cond)
>>> + return nullptr;
>>> + return Cond->isZero() ? BI->getSuccessor(1) :
>>> +BI->getSuccessor(0);
>>> + }
>>> +
>>> + if (SwitchInst *SI = dyn_cast<SwitchInst>(TI)) {
>>> + auto *CI = dyn_cast<ConstantInt>(SI->getCondition());
>>> + if (!CI)
>>> + return nullptr;
>>> + for (auto Case : SI->cases())
>>> + if (Case.getCaseValue() == CI)
>>> + return Case.getCaseSuccessor();
>>> + return SI->getDefaultDest();
>>> + }
>>> +
>>> + return nullptr;
>>> +}
>>> +
>>> +/// Helper class that can turn branches and switches with constant
>>> +conditions /// into unconditional branches.
>>> +class ConstantTerminatorFoldingImpl {
>>> +private:
>>> + Loop &L;
>>> + LoopInfo &LI;
>>> + DominatorTree &DT;
>>> +
>>> + // Whether or not the current loop will still exist after
>>> + terminator constant // folding will be done. In theory, there are
>>> two ways how it can happen:
>>> + // 1. Loop's latch(es) become unreachable from loop header; // 2.
>>> + Loop's header becomes unreachable from method entry.
>>> + // In practice, the second situation is impossible because we only
>>> + modify the // current loop and its preheader and do not affect
>>> + preheader's reachibility // from any other block. So this variable
>>> + set to true means that loop's latch // has become unreachable from
>>> loop header.
>>> + bool DeleteCurrentLoop = false;
>>> +
>>> + // The blocks of the original loop that will still be reachable
>>> + from entry // after the constant folding.
>>> + SmallPtrSet<BasicBlock *, 8> LiveLoopBlocks; // The blocks of the
>>> + original loop that will become unreachable from entry // after the
>>> + constant folding.
>>> + SmallPtrSet<BasicBlock *, 8> DeadLoopBlocks; // The exits of the
>>> + original loop that will still be reachable from entry // after the
>>> + constant folding.
>>> + SmallPtrSet<BasicBlock *, 8> LiveExitBlocks; // The exits of the
>>> + original loop that will become unreachable from entry // after the
>>> + constant folding.
>>> + SmallPtrSet<BasicBlock *, 8> DeadExitBlocks; // The blocks that
>>> + will still be a part of the current loop after folding.
>>> + SmallPtrSet<BasicBlock *, 8> BlocksInLoopAfterFolding; // The
>>> + blocks that have terminators with constant condition that can be //
>>> + folded. Note: fold candidates should be in L but not in any of its
>>> + // subloops to avoid complex LI updates.
>>> + SmallVector<BasicBlock *, 8> FoldCandidates;
>>> +
>>> + void dump() const {
>>> + dbgs() << "Constant terminator folding for loop " << L << "\n";
>>> + dbgs() << "After terminator constant-folding, the loop will";
>>> + if (!DeleteCurrentLoop)
>>> + dbgs() << " not";
>>> + dbgs() << " be destroyed\n";
>>> + dbgs() << "Blocks in which we can constant-fold terminator:\n";
>>> + for (const BasicBlock *BB : FoldCandidates)
>>> + dbgs() << "\t" << BB->getName() << "\n";
>>> + auto PrintOutSet = [&](const char *Message,
>>> + const SmallPtrSetImpl<BasicBlock *> &S) {
>>> + dbgs() << Message << "\n";
>>> + for (const BasicBlock *BB : S)
>>> + dbgs() << "\t" << BB->getName() << "\n";
>>> + };
>>> + PrintOutSet("Live blocks from the original loop:", LiveLoopBlocks);
>>> + PrintOutSet("Dead blocks from the original loop:", DeadLoopBlocks);
>>> + PrintOutSet("Live exit blocks:", LiveExitBlocks);
>>> + PrintOutSet("Dead exit blocks:", DeadExitBlocks);
>>> + if (!DeleteCurrentLoop)
>>> + PrintOutSet("The following blocks will still be part of the
>>> loop:",
>>> + BlocksInLoopAfterFolding); }
>>> +
>>> + /// Fill all information about status of blocks and exits of the
>>> + current loop /// if constant folding of all branches will be done.
>>> + void analyze() {
>>> + LoopBlocksDFS DFS(&L);
>>> + DFS.perform(&LI);
>>> + assert(DFS.isComplete() && "DFS is expected to be finished");
>>> +
>>> + // Collect live and dead loop blocks and exits.
>>> + SmallPtrSet<BasicBlock *, 8> ExitBlocks;
>>> + LiveLoopBlocks.insert(L.getHeader());
>>> + for (auto I = DFS.beginRPO(), E = DFS.endRPO(); I != E; ++I) {
>>> + BasicBlock *BB = *I;
>>> +
>>> + // If a loop block wasn't marked as live so far, then it's dead.
>>> + if (!LiveLoopBlocks.count(BB)) {
>>> + DeadLoopBlocks.insert(BB);
>>> + continue;
>>> + }
>>> +
>>> + BasicBlock *TheOnlySucc = getOnlyLiveSuccessor(BB);
>>> +
>>> + // If a block has only one live successor, it's a candidate on
>>> constant
>>> + // folding. Only handle blocks from current loop: branches in
>>> child loops
>>> + // are skipped because if they can be folded, they should be
>>> folded during
>>> + // the processing of child loops.
>>> + if (TheOnlySucc && LI.getLoopFor(BB) == &L)
>>> + FoldCandidates.push_back(BB);
>>> +
>>> + // Handle successors.
>>> + auto ProcessSuccessor = [&](BasicBlock *Succ, bool IsLive) {
>>> + if (!L.contains(Succ)) {
>>> + if (IsLive)
>>> + LiveExitBlocks.insert(Succ);
>>> + ExitBlocks.insert(Succ);
>>> + } else if (IsLive)
>>> + LiveLoopBlocks.insert(Succ);
>>> + };
>>> + for (BasicBlock *Succ : successors(BB))
>>> + ProcessSuccessor(Succ, !TheOnlySucc || TheOnlySucc == Succ);
>>> + }
>>> +
>>> + // Sanity check: amount of dead and live loop blocks should
>>> match the total
>>> + // number of blocks in loop.
>>> + assert(L.getNumBlocks() == LiveLoopBlocks.size() +
>>> DeadLoopBlocks.size() &&
>>> + "Malformed block sets?");
>>> +
>>> + // Now, all exit blocks that are not marked as live are dead.
>>> + for (auto *ExitBlock : ExitBlocks)
>>> + if (!LiveExitBlocks.count(ExitBlock))
>>> + DeadExitBlocks.insert(ExitBlock);
>>> +
>>> + // Whether or not the edge From->To will still be present in
>>> graph after the
>>> + // folding.
>>> + auto IsEdgeLive = [&](BasicBlock *From, BasicBlock *To) {
>>> + if (!LiveLoopBlocks.count(From))
>>> + return false;
>>> + BasicBlock *TheOnlySucc = getOnlyLiveSuccessor(From);
>>> + return !TheOnlySucc || TheOnlySucc == To;
>>> + };
>>> +
>>> + // The loop will not be destroyed if its latch is live.
>>> + DeleteCurrentLoop = !IsEdgeLive(L.getLoopLatch(), L.getHeader());
>>> +
>>> + // If we are going to delete the current loop completely, no
>>> extra analysis
>>> + // is needed.
>>> + if (DeleteCurrentLoop)
>>> + return;
>>> +
>>> + // Otherwise, we should check which blocks will still be a part
>>> of the
>>> + // current loop after the transform.
>>> + BlocksInLoopAfterFolding.insert(L.getLoopLatch());
>>> + // If the loop is live, then we should compute what blocks are
>>> still in
>>> + // loop after all branch folding has been done. A block is in
>>> loop if
>>> + // it has a live edge to another block that is in the loop; by
>>> definition,
>>> + // latch is in the loop.
>>> + auto BlockIsInLoop = [&](BasicBlock *BB) {
>>> + return any_of(successors(BB), [&](BasicBlock *Succ) {
>>> + return BlocksInLoopAfterFolding.count(Succ) &&
>>> IsEdgeLive(BB, Succ);
>>> + });
>>> + };
>>> + for (auto I = DFS.beginPostorder(), E = DFS.endPostorder(); I !=
>>> E; ++I) {
>>> + BasicBlock *BB = *I;
>>> + if (BlockIsInLoop(BB))
>>> + BlocksInLoopAfterFolding.insert(BB);
>>> + }
>>> +
>>> + // Sanity check: header must be in loop.
>>> + assert(BlocksInLoopAfterFolding.count(L.getHeader()) &&
>>> + "Header not in loop?");
>>> + }
>>> +
>>> + /// Constant-fold terminators of blocks acculumated in
>>> + FoldCandidates into the /// unconditional branches.
>>> + void foldTerminators() {
>>> + DomTreeUpdater DTU(DT, DomTreeUpdater::UpdateStrategy::Eager);
>>> +
>>> + for (BasicBlock *BB : FoldCandidates) {
>>> + assert(LI.getLoopFor(BB) == &L && "Should be a loop block!");
>>> + BasicBlock *TheOnlySucc = getOnlyLiveSuccessor(BB);
>>> + assert(TheOnlySucc && "Should have one live successor!");
>>> +
>>> + LLVM_DEBUG(dbgs() << "Replacing terminator of " << BB->getName()
>>> + << " with an unconditional branch to the
>>> block "
>>> + << TheOnlySucc->getName() << "\n");
>>> +
>>> + SmallPtrSet<BasicBlock *, 2> DeadSuccessors;
>>> + // Remove all BB's successors except for the live one.
>>> + for (auto *Succ : successors(BB))
>>> + if (Succ != TheOnlySucc) {
>>> + DeadSuccessors.insert(Succ);
>>> + Succ->removePredecessor(BB);
>>> + }
>>> +
>>> + IRBuilder<> Builder(BB->getContext());
>>> + Instruction *Term = BB->getTerminator();
>>> + Builder.SetInsertPoint(Term);
>>> + Builder.CreateBr(TheOnlySucc);
>>> + Term->eraseFromParent();
>>> +
>>> + for (auto *DeadSucc : DeadSuccessors)
>>> + DTU.deleteEdge(BB, DeadSucc);
>>> +
>>> + ++NumTerminatorsFolded;
>>> + }
>>> + }
>>> +
>>> +public:
>>> + ConstantTerminatorFoldingImpl(Loop &L, LoopInfo &LI, DominatorTree
>>> &DT)
>>> + : L(L), LI(LI), DT(DT) {}
>>> + bool run() {
>>> + assert(L.getLoopLatch() && "Should be single latch!");
>>> +
>>> + // Collect all available information about status of blocks
>>> after constant
>>> + // folding.
>>> + analyze();
>>> +
>>> + LLVM_DEBUG(dbgs() << "In function " <<
>>> L.getHeader()->getParent()->getName()
>>> + << ": ");
>>> +
>>> + // Nothing to constant-fold.
>>> + if (FoldCandidates.empty()) {
>>> + LLVM_DEBUG(
>>> + dbgs() << "No constant terminator folding candidates found
>>> in loop "
>>> + << L.getHeader()->getName() << "\n");
>>> + return false;
>>> + }
>>> +
>>> + // TODO: Support deletion of the current loop.
>>> + if (DeleteCurrentLoop) {
>>> + LLVM_DEBUG(
>>> + dbgs()
>>> + << "Give up constant terminator folding in loop "
>>> + << L.getHeader()->getName()
>>> + << ": we don't currently support deletion of the current
>>> loop.\n");
>>> + return false;
>>> + }
>>> +
>>> + // TODO: Support deletion of dead loop blocks.
>>> + if (!DeadLoopBlocks.empty()) {
>>> + LLVM_DEBUG(dbgs() << "Give up constant terminator folding in
>>> loop "
>>> + << L.getHeader()->getName()
>>> + << ": we don't currently"
>>> + " support deletion of dead in-loop
>>> blocks.\n");
>>> + return false;
>>> + }
>>> +
>>> + // TODO: Support dead loop exits.
>>> + if (!DeadExitBlocks.empty()) {
>>> + LLVM_DEBUG(dbgs() << "Give up constant terminator folding in
>>> loop "
>>> + << L.getHeader()->getName()
>>> + << ": we don't currently support dead loop
>>> exits.\n");
>>> + return false;
>>> + }
>>> +
>>> + // TODO: Support blocks that are not dead, but also not in loop
>>> after the
>>> + // folding.
>>> + if (BlocksInLoopAfterFolding.size() != L.getNumBlocks()) {
>>> + LLVM_DEBUG(
>>> + dbgs() << "Give up constant terminator folding in loop "
>>> + << L.getHeader()->getName()
>>> + << ": we don't currently"
>>> + " support blocks that are not dead, but will stop "
>>> + "being a part of the loop after
>>> constant-folding.\n");
>>> + return false;
>>> + }
>>> +
>>> + // Dump analysis results.
>>> + LLVM_DEBUG(dump());
>>> +
>>> + LLVM_DEBUG(dbgs() << "Constant-folding " << FoldCandidates.size()
>>> + << " terminators in loop " <<
>>> L.getHeader()->getName()
>>> + << "\n");
>>> +
>>> + // Make the actual transforms.
>>> + foldTerminators();
>>> +
>>> +#ifndef NDEBUG
>>> + // Make sure that we have preserved all data structures after
>>> the transform.
>>> + DT.verify();
>>> + assert(DT.isReachableFromEntry(L.getHeader()));
>>> + LI.verify(DT);
>>> +#endif
>>> +
>>> + return true;
>>> + }
>>> +};
>>> +
>>> +/// Turn branches and switches with known constant conditions into
>>> +unconditional /// branches.
>>> +static bool constantFoldTerminators(Loop &L, DominatorTree &DT,
>>> +LoopInfo &LI) {
>>> + // To keep things simple, only process loops with single latch. We
>>> + // canonicalize most loops to this form. We can support
>>> multi-latch if needed.
>>> + if (!L.getLoopLatch())
>>> + return false;
>>> +
>>> + ConstantTerminatorFoldingImpl BranchFolder(L, LI, DT);
>>> + return BranchFolder.run();
>>> +}
>>> +
>>> static bool mergeBlocksIntoPredecessors(Loop &L, DominatorTree &DT,
>>> LoopInfo &LI,
>>> MemorySSAUpdater *MSSAU) {
>>> bool Changed = false;
>>> @@ -73,6 +385,9 @@ static bool simplifyLoopCFG(Loop &L, Dom
>>> ScalarEvolution &SE, MemorySSAUpdater
>>> *MSSAU) {
>>> bool Changed = false;
>>> + // Constant-fold terminators with known constant conditions.
>>> + Changed |= constantFoldTerminators(L, DT, LI);
>>> +
>>> // Eliminate unconditional branches by merging blocks into their
>>> predecessors.
>>> Changed |= mergeBlocksIntoPredecessors(L, DT, LI, MSSAU);
>>>
>>> Modified:
>>> llvm/trunk/test/Transforms/LoopSimplifyCFG/constant-fold-branch.ll
>>> URL:
>>> http://llvm.org/viewvc/llvm-project/llvm/trunk/test/Transforms/LoopSim
>>> plifyCFG/constant-fold-branch.ll?rev=347289&r1=347288&r2=347289&view=d
>>> iff
>>> ======================================================================
>>> ========
>>> --- llvm/trunk/test/Transforms/LoopSimplifyCFG/constant-fold-branch.ll
>>> (original)
>>> +++ llvm/trunk/test/Transforms/LoopSimplifyCFG/constant-fold-branch.ll
>>> +++ Mon Nov 19 21:43:32 2018
>>> @@ -1,10 +1,58 @@
>>> ; NOTE: Assertions have been autogenerated by
>>> utils/update_test_checks.py -; RUN: opt -S -loop-simplifycfg < %s |
>>> FileCheck %s -; RUN: opt -S
>>> -passes='require<domtree>,loop(simplify-cfg)' < %s | FileCheck %s -;
>>> RUN: opt -S -loop-simplifycfg -enable-mssa-loop-dependency=true
>>> -verify-memoryssa < %s | FileCheck %s
>>> +; REQUIRES: asserts
>>> +; RUN: opt -S -loop-simplifycfg -debug-only=loop-simplifycfg 2>&1 <
>>> +%s | FileCheck %s ; RUN: opt -S
>>> +-passes='require<domtree>,loop(simplify-cfg)'
>>> +-debug-only=loop-simplifycfg 2>&1 < %s | FileCheck %s ; RUN: opt -S
>>> +-loop-simplifycfg -enable-mssa-loop-dependency=true -verify-memoryssa
>>> +-debug-only=loop-simplifycfg 2>&1 < %s | FileCheck %s
>>> target datalayout = "e-m:e-i64:64-f80:128-n8:16:32:64-S128-ni:1"
>>> +; CHECK-LABEL: In function dead_backedge_test_branch_loop: Give up
>>> constant terminator folding in loop header: we don't currently
>>> support blocks that are not dead, but will stop being a part of the
>>> loop after constant-folding.
>>> +; CHECK-LABEL: In function dead_backedge_test_switch_loop: Give up
>>> constant terminator folding in loop header: we don't currently
>>> support blocks that are not dead, but will stop being a part of the
>>> loop after constant-folding.
>>> +; CHECK-LABEL: In function dead_block_test_branch_loop: Give up
>>> constant terminator folding in loop header: we don't currently
>>> support deletion of dead in-loop blocks.
>>> +; CHECK-LABEL: In function dead_block_test_switch_loop: Give up
>>> constant terminator folding in loop header: we don't currently
>>> support deletion of dead in-loop blocks.
>>> +; CHECK-LABEL: In function dead_block_propogate_test_branch_loop:
>>> Give up constant terminator folding in loop header: we don't
>>> currently support deletion of dead in-loop blocks.
>>> +; CHECK-LABEL: In function dead_block_propogate_test_switch_loop:
>>> Give up constant terminator folding in loop header: we don't
>>> currently support deletion of dead in-loop blocks.
>>> +; CHECK-LABEL: In function dead_exit_test_branch_loop: Give up
>>> constant terminator folding in loop header: we don't currently
>>> support dead loop exits.
>>> +; CHECK-LABEL: In function dead_exit_test_switch_loop: Give up
>>> constant terminator folding in loop header: we don't currently
>>> support dead loop exits.
>>> +; CHECK-LABEL: In function dead_loop_test_branch_loop: Give up
>>> constant terminator folding in loop header: we don't currently
>>> support deletion of the current loop.
>>> +; CHECK-LABEL: In function dead_loop_test_switch_loop: Give up
>>> constant terminator folding in loop header: we don't currently
>>> support deletion of the current loop.
>>> +; CHECK-LABEL: In function dead_sub_loop_test_branch_loop: No
>>> +constant terminator folding candidates found in loop dead_loop ;
>>> +CHECK-LABEL: In function dead_sub_loop_test_branch_loop: No constant
>>> terminator folding candidates found in loop live_loop ; CHECK-LABEL:
>>> In function dead_sub_loop_test_branch_loop: Give up constant
>>> terminator folding in loop header: we don't currently support
>>> deletion of dead in-loop blocks.
>>> +; CHECK-LABEL: In function dead_sub_loop_test_switch_loop: No
>>> +constant terminator folding candidates found in loop live_loop ;
>>> +CHECK-LABEL: In function dead_sub_loop_test_switch_loop: No constant
>>> terminator folding candidates found in loop dead_loop ; CHECK-LABEL:
>>> In function dead_sub_loop_test_switch_loop: Give up constant
>>> terminator folding in loop header: we don't currently support
>>> deletion of dead in-loop blocks.
>>> +; CHECK-LABEL: In function inf_loop_test_branch_loop: Give up
>>> constant terminator folding in loop header: we don't currently
>>> support deletion of dead in-loop blocks.
>>> +; CHECK-LABEL: In function inf_loop_test_switch_loop: Give up
>>> constant terminator folding in loop header: we don't currently
>>> support deletion of dead in-loop blocks.
>>> +; CHECK-LABEL: In function live_block_test_branch_loop: Constant
>>> terminator folding for loop Loop at depth 1 containing:
>>> %header<header>,%check,%live,%backedge<latch><exiting>
>>> +; CHECK: Replacing terminator of check with an unconditional
>>> branch to the block backedge
>>> +; CHECK-LABEL: In function live_block_test_branch_loop_phis:
>>> Constant terminator folding for loop Loop at depth 1 containing:
>>> %header<header>,%check,%live,%backedge<latch><exiting>
>>> +; CHECK: Replacing terminator of check with an unconditional
>>> branch to the block backedge
>>> +; CHECK-LABEL: In function live_block_test_switch_loop: Constant
>>> terminator folding for loop Loop at depth 1 containing:
>>> %header<header>,%check,%live,%backedge<latch><exiting>
>>> +; CHECK: Replacing terminator of check with an unconditional
>>> branch to the block backedge
>>> +; CHECK-LABEL: In function live_block_test_switch_loop_phis:
>>> Constant terminator folding for loop Loop at depth 1 containing:
>>> %header<header>,%check,%live,%backedge<latch><exiting>
>>> +; CHECK: Replacing terminator of check with an unconditional
>>> branch to the block backedge
>>> +; CHECK-LABEL: In function partial_sub_loop_test_branch_loop: Give
>>> up constant terminator folding in loop header: we don't currently
>>> support deletion of dead in-loop blocks.
>>> +; CHECK-LABEL: In function partial_sub_loop_test_branch_loop: No
>>> +constant terminator folding candidates found in loop outer_header ;
>>> CHECK-LABEL: In function partial_sub_loop_test_switch_loop: Give up
>>> constant terminator folding in loop header: we don't currently
>>> support deletion of dead in-loop blocks.
>>> +; CHECK-LABEL: In function partial_sub_loop_test_switch_loop: No
>>> +constant terminator folding candidates found in loop outer_header ;
>>> CHECK-LABEL: In function full_sub_loop_test_branch_loop: Give up
>>> constant terminator folding in loop header: we don't currently
>>> support deletion of the current loop.
>>> +; CHECK-LABEL: In function full_sub_loop_test_branch_loop: No
>>> +constant terminator folding candidates found in loop outer_header ;
>>> CHECK-LABEL: In function full_sub_loop_test_switch_loop: Give up
>>> constant terminator folding in loop header: we don't currently
>>> support deletion of the current loop.
>>> +; CHECK-LABEL: In function full_sub_loop_test_switch_loop: No
>>> +constant terminator folding candidates found in loop outer_header ;
>>> CHECK-LABEL: In function full_sub_loop_test_branch_loop_inverse_1:
>>> Give up constant terminator folding in loop header: we don't
>>> currently support deletion of the current loop.
>>> +; CHECK-LABEL: In function full_sub_loop_test_branch_loop_inverse_1:
>>> +No constant terminator folding candidates found in loop outer_header
>>> ; CHECK-LABEL: In function full_sub_loop_test_switch_loop_inverse_1:
>>> Give up constant terminator folding in loop header: we don't
>>> currently support deletion of the current loop.
>>> +; CHECK-LABEL: In function full_sub_loop_test_switch_loop_inverse_1:
>>> +No constant terminator folding candidates found in loop outer_header
>>> ; CHECK-LABEL: In function full_sub_loop_test_branch_loop_inverse_2:
>>> Give up constant terminator folding in loop header: we don't
>>> currently support dead loop exits.
>>> +; CHECK-LABEL: In function full_sub_loop_test_branch_loop_inverse_2:
>>> +No constant terminator folding candidates found in loop outer_header
>>> ; CHECK-LABEL: In function full_sub_loop_test_switch_loop_inverse_2:
>>> Give up constant terminator folding in loop header: we don't
>>> currently support dead loop exits.
>>> +; CHECK-LABEL: In function full_sub_loop_test_switch_loop_inverse_2:
>>> +No constant terminator folding candidates found in loop outer_header
>>> ; CHECK-LABEL: In function full_sub_loop_test_branch_loop_inverse_3:
>>> Give up constant terminator folding in loop header: we don't
>>> currently support deletion of dead in-loop blocks.
>>> +; CHECK-LABEL: In function full_sub_loop_test_branch_loop_inverse_3:
>>> +No constant terminator folding candidates found in loop outer_header
>>> ; CHECK-LABEL: In function full_sub_loop_test_switch_loop_inverse_3:
>>> Give up constant terminator folding in loop header: we don't
>>> currently support deletion of dead in-loop blocks.
>>> +; CHECK-LABEL: In function full_sub_loop_test_switch_loop_inverse_3:
>>> +No constant terminator folding candidates found in loop outer_header
>>> +
>>> ; Make sure that we can eliminate a provably dead backedge.
>>> define i32 @dead_backedge_test_branch_loop(i32 %end) {
>>> ; CHECK-LABEL: @dead_backedge_test_branch_loop( @@ -707,7 +755,7 @@
>>> define i32 @live_block_test_branch_loop(
>>> ; CHECK-NEXT: [[I:%.*]] = phi i32 [ 0, [[PREHEADER:%.*]] ], [
>>> [[I_INC:%.*]], [[BACKEDGE:%.*]] ]
>>> ; CHECK-NEXT: br i1 [[C:%.*]], label [[CHECK:%.*]], label
>>> [[LIVE:%.*]]
>>> ; CHECK: check:
>>> -; CHECK-NEXT: br i1 true, label [[BACKEDGE]], label [[LIVE]]
>>> +; CHECK-NEXT: br label [[BACKEDGE]]
>>> ; CHECK: live:
>>> ; CHECK-NEXT: [[I_2:%.*]] = add i32 [[I]], 1
>>> ; CHECK-NEXT: br label [[BACKEDGE]]
>>> @@ -744,6 +792,54 @@ exit:
>>> ret i32 %i.inc
>>> }
>>> +; Check that when the block is not actually dead, we don't remove it.
>>> +Version ; with Phi node.
>>> +define i32 @live_block_test_branch_loop_phis(i1 %c, i32 %end) { ;
>>> +CHECK-LABEL: @live_block_test_branch_loop_phis(
>>> +; CHECK-NEXT: preheader:
>>> +; CHECK-NEXT: br label [[HEADER:%.*]]
>>> +; CHECK: header:
>>> +; CHECK-NEXT: [[I:%.*]] = phi i32 [ 0, [[PREHEADER:%.*]] ], [
>>> [[I_INC:%.*]], [[BACKEDGE:%.*]] ]
>>> +; CHECK-NEXT: br i1 [[C:%.*]], label [[CHECK:%.*]], label
>>> [[LIVE:%.*]]
>>> +; CHECK: check:
>>> +; CHECK-NEXT: br label [[BACKEDGE]]
>>> +; CHECK: live:
>>> +; CHECK-NEXT: [[I_2:%.*]] = add i32 [[I]], 1
>>> +; CHECK-NEXT: br label [[BACKEDGE]]
>>> +; CHECK: backedge:
>>> +; CHECK-NEXT: [[I_1:%.*]] = phi i32 [ [[I]], [[CHECK]] ], [
>>> [[I_2]], [[LIVE]] ]
>>> +; CHECK-NEXT: [[I_INC]] = add i32 [[I_1]], 1
>>> +; CHECK-NEXT: [[CMP:%.*]] = icmp slt i32 [[I_INC]], [[END:%.*]]
>>> +; CHECK-NEXT: br i1 [[CMP]], label [[HEADER]], label [[EXIT:%.*]]
>>> +; CHECK: exit:
>>> +; CHECK-NEXT: [[I_INC_LCSSA:%.*]] = phi i32 [ [[I_INC]],
>>> [[BACKEDGE]] ]
>>> +; CHECK-NEXT: ret i32 [[I_INC_LCSSA]]
>>> +;
>>> +preheader:
>>> + br label %header
>>> +
>>> +header:
>>> + %i = phi i32 [0, %preheader], [%i.inc, %backedge]
>>> + br i1 %c, label %check, label %live
>>> +
>>> +check:
>>> + br i1 true, label %backedge, label %live
>>> +
>>> +live:
>>> + %phi = phi i32 [ 1, %header ], [ -1, %check ]
>>> + %i.2 = add i32 %i, %phi
>>> + br label %backedge
>>> +
>>> +backedge:
>>> + %i.1 = phi i32 [%i, %check], [%i.2, %live]
>>> + %i.inc = add i32 %i.1, 1
>>> + %cmp = icmp slt i32 %i.inc, %end
>>> + br i1 %cmp, label %header, label %exit
>>> +
>>> +exit:
>>> + ret i32 %i.inc
>>> +}
>>> +
>>> define i32 @live_block_test_switch_loop(i1 %c, i32 %end) {
>>> ; CHECK-LABEL: @live_block_test_switch_loop(
>>> ; CHECK-NEXT: preheader:
>>> @@ -752,11 +848,7 @@ define i32 @live_block_test_switch_loop(
>>> ; CHECK-NEXT: [[I:%.*]] = phi i32 [ 0, [[PREHEADER:%.*]] ], [
>>> [[I_INC:%.*]], [[BACKEDGE:%.*]] ]
>>> ; CHECK-NEXT: br i1 [[C:%.*]], label [[CHECK:%.*]], label
>>> [[LIVE:%.*]]
>>> ; CHECK: check:
>>> -; CHECK-NEXT: switch i32 1, label [[LIVE]] [
>>> -; CHECK-NEXT: i32 0, label [[LIVE]]
>>> -; CHECK-NEXT: i32 1, label [[BACKEDGE]]
>>> -; CHECK-NEXT: i32 2, label [[LIVE]]
>>> -; CHECK-NEXT: ]
>>> +; CHECK-NEXT: br label [[BACKEDGE]]
>>> ; CHECK: live:
>>> ; CHECK-NEXT: [[I_2:%.*]] = add i32 [[I]], 1
>>> ; CHECK-NEXT: br label [[BACKEDGE]]
>>> @@ -786,6 +878,54 @@ live:
>>> br label %backedge
>>> backedge:
>>> + %i.1 = phi i32 [%i, %check], [%i.2, %live] %i.inc = add i32 %i.1,
>>> + 1 %cmp = icmp slt i32 %i.inc, %end br i1 %cmp, label %header,
>>> + label %exit
>>> +
>>> +exit:
>>> + ret i32 %i.inc
>>> +}
>>> +
>>> +define i32 @live_block_test_switch_loop_phis(i1 %c, i32 %end) { ;
>>> +CHECK-LABEL: @live_block_test_switch_loop_phis(
>>> +; CHECK-NEXT: preheader:
>>> +; CHECK-NEXT: br label [[HEADER:%.*]]
>>> +; CHECK: header:
>>> +; CHECK-NEXT: [[I:%.*]] = phi i32 [ 0, [[PREHEADER:%.*]] ], [
>>> [[I_INC:%.*]], [[BACKEDGE:%.*]] ]
>>> +; CHECK-NEXT: br i1 [[C:%.*]], label [[CHECK:%.*]], label
>>> [[LIVE:%.*]]
>>> +; CHECK: check:
>>> +; CHECK-NEXT: br label [[BACKEDGE]]
>>> +; CHECK: live:
>>> +; CHECK-NEXT: [[I_2:%.*]] = add i32 [[I]], 1
>>> +; CHECK-NEXT: br label [[BACKEDGE]]
>>> +; CHECK: backedge:
>>> +; CHECK-NEXT: [[I_1:%.*]] = phi i32 [ [[I]], [[CHECK]] ], [
>>> [[I_2]], [[LIVE]] ]
>>> +; CHECK-NEXT: [[I_INC]] = add i32 [[I_1]], 1
>>> +; CHECK-NEXT: [[CMP:%.*]] = icmp slt i32 [[I_INC]], [[END:%.*]]
>>> +; CHECK-NEXT: br i1 [[CMP]], label [[HEADER]], label [[EXIT:%.*]]
>>> +; CHECK: exit:
>>> +; CHECK-NEXT: [[I_INC_LCSSA:%.*]] = phi i32 [ [[I_INC]],
>>> [[BACKEDGE]] ]
>>> +; CHECK-NEXT: ret i32 [[I_INC_LCSSA]]
>>> +;
>>> +preheader:
>>> + br label %header
>>> +
>>> +header:
>>> + %i = phi i32 [0, %preheader], [%i.inc, %backedge]
>>> + br i1 %c, label %check, label %live
>>> +
>>> +check:
>>> + switch i32 1, label %live [i32 0, label %live
>>> + i32 1, label %backedge
>>> + i32 2, label %live]
>>> +
>>> +live:
>>> + %phi = phi i32 [ 1, %header ], [ -1, %check ], [ -1, %check ], [
>>> +-1, %check ]
>>> + %i.2 = add i32 %i, %phi
>>> + br label %backedge
>>> +
>>> +backedge:
>>> %i.1 = phi i32 [%i, %check], [%i.2, %live]
>>> %i.inc = add i32 %i.1, 1
>>> %cmp = icmp slt i32 %i.inc, %end
>>>
>>>
>>> _______________________________________________
>>> llvm-commits mailing list
>>> llvm-commits at lists.llvm.org
>>> http://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-commits
>>>
>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: bbi-21358.ll
URL: <http://lists.llvm.org/pipermail/llvm-commits/attachments/20181123/8d70f424/attachment.ksh>
More information about the llvm-commits
mailing list