[llvm] r341726 - [SimplifyIndVar] Avoid generating truncate instructions with non-hoisted Laod operand.
Philip Reames via llvm-commits
llvm-commits at lists.llvm.org
Mon Sep 10 14:40:34 PDT 2018
I have serious concerns with this patch. I don't believe this patch
meets our usual standards. I believe this patch warrants being
reverted, and then re-reviewed from scratch.
@sebpop, I don't think it was appropriate to approve this patch given
the public history. I wouldn't normally call that out, but this seems
like a really clear cut case.
@Abderrazek, please don't let me scare you off here. While I think this
patch does need reverted, I think this can be adjusted into something
clearly worthwhile, and I encourage you to do so. I'm happy to help as
well. (Fair warning, my time is very limited, so my help will only go
so far.)
Philip
On 09/07/2018 03:41 PM, Abderrazek Zaafrani via llvm-commits wrote:
> Author: az
> Date: Fri Sep 7 15:41:57 2018
> New Revision: 341726
>
> URL: http://llvm.org/viewvc/llvm-project?rev=341726&view=rev
> Log:
> [SimplifyIndVar] Avoid generating truncate instructions with non-hoisted Laod operand.
(For the future, you had a nice comment in the review about the
reasoning. The submit comment should include that too.)
Your reasoning here is explained purely in terms of what we do for
loop-invariant loads. You don't state what this is, or provide a clear
description of what the code generation should be. I've read over the
review and the code, and can reverse engineer what you're going for, but
it is your responsibility to make this clear from the submitted code.
This patch does not achieve that objective.
Reverse engineering the code, here's what I *think* you're trying to
accomplish:
If we find a binary operator where we need to extend one side, check to
see if we can cheaply extend the other operand and widen the load
instead. Many architectures can efficiently generate an extending load,
so we consider loads to be one such cheaply extensible case.
(I can't connect this understanding of the code to your comments in the
review though, so maybe I'm missing something still?)
In terms of the review discussion, I am concerned that you appear to be
mixing TBAA and AliasSet terminology. You appear to have rejected an
approach based on a possibly flawed understanding. Your reviewers
should have asked for a reference w.r.t. the rejected approach (e.g.
email discussion, review, or rejected patch).
>
> Differential Revision: https://reviews.llvm.org/D49151
>
> Modified:
> llvm/trunk/lib/Transforms/Scalar/IndVarSimplify.cpp
> llvm/trunk/test/Transforms/IndVarSimplify/iv-widen-elim-ext.ll
>
> Modified: llvm/trunk/lib/Transforms/Scalar/IndVarSimplify.cpp
> URL: http://llvm.org/viewvc/llvm-project/llvm/trunk/lib/Transforms/Scalar/IndVarSimplify.cpp?rev=341726&r1=341725&r2=341726&view=diff
> ==============================================================================
> --- llvm/trunk/lib/Transforms/Scalar/IndVarSimplify.cpp (original)
> +++ llvm/trunk/lib/Transforms/Scalar/IndVarSimplify.cpp Fri Sep 7 15:41:57 2018
> @@ -1017,6 +1017,8 @@ protected:
> Instruction *widenIVUse(NarrowIVDefUse DU, SCEVExpander &Rewriter);
>
> bool widenLoopCompare(NarrowIVDefUse DU);
> + bool widenWithVariantLoadUse(NarrowIVDefUse DU);
> + void widenWithVariantLoadUseCodegen(NarrowIVDefUse DU);
>
> void pushNarrowIVUsers(Instruction *NarrowDef, Instruction *WideDef);
> };
> @@ -1361,6 +1363,146 @@ bool WidenIV::widenLoopCompare(NarrowIVD
> return true;
> }
>
> +/// If the narrow use is an instruction whose two operands are the defining
> +/// instruction of DU and a load instruction, then we have the following:
> +/// if the load is hoisted outside the loop, then we do not reach this function
> +/// as scalar evolution analysis works fine in widenIVUse with variables
> +/// hoisted outside the loop and efficient code is subsequently generated by
> +/// not emitting truncate instructions. But when the load is not hoisted
> +/// (whether due to limitation in alias analysis or due to a true legality),
> +/// then scalar evolution can not proceed with loop variant values and
> +/// inefficient code is generated. This function handles the non-hoisted load
> +/// special case by making the optimization generate the same type of code for
> +/// hoisted and non-hoisted load (widen use and eliminate sign extend
> +/// instruction). This special case is important especially when the induction
> +/// variables are affecting addressing mode in code generation.
This comment really tells me nothing about what this function does, or
what it's goal is.
> +bool WidenIV::widenWithVariantLoadUse(NarrowIVDefUse DU) {
> + Instruction *NarrowUse = DU.NarrowUse;
> + Instruction *NarrowDef = DU.NarrowDef;
> + Instruction *WideDef = DU.WideDef;
> +
> + // Handle the common case of add<nsw/nuw>
> + const unsigned OpCode = NarrowUse->getOpcode();
> + // Only Add/Sub/Mul instructions are supported.
Why?
> + if (OpCode != Instruction::Add && OpCode != Instruction::Sub &&
> + OpCode != Instruction::Mul)
> + return false;
> +
> + // The operand that is not defined by NarrowDef of DU. Let's call it the
> + // other operand.
> + unsigned ExtendOperIdx = DU.NarrowUse->getOperand(0) == NarrowDef ? 1 : 0;
> + assert(DU.NarrowUse->getOperand(1 - ExtendOperIdx) == DU.NarrowDef &&
> + "bad DU");
> +
> + const SCEV *ExtendOperExpr = nullptr;
> + const OverflowingBinaryOperator *OBO =
> + cast<OverflowingBinaryOperator>(NarrowUse);
> + ExtendKind ExtKind = getExtendKind(NarrowDef);
> + if (ExtKind == SignExtended && OBO->hasNoSignedWrap())
> + ExtendOperExpr = SE->getSignExtendExpr(
> + SE->getSCEV(NarrowUse->getOperand(ExtendOperIdx)), WideType);
> + else if (ExtKind == ZeroExtended && OBO->hasNoUnsignedWrap())
> + ExtendOperExpr = SE->getZeroExtendExpr(
> + SE->getSCEV(NarrowUse->getOperand(ExtendOperIdx)), WideType);
> + else
> + return false;
> +
> + // We are interested in the other operand being a load instruction.
> + // But, we should look into relaxing this restriction later on.
> + auto *I = dyn_cast<Instruction>(NarrowUse->getOperand(ExtendOperIdx));
> + if (I && I->getOpcode() != Instruction::Load)
> + return false;
> +
> + // Verifying that Defining operand is an AddRec
> + const SCEV *Op1 = SE->getSCEV(WideDef);
> + const SCEVAddRecExpr *AddRecOp1 = dyn_cast<SCEVAddRecExpr>(Op1);
> + if (!AddRecOp1 || AddRecOp1->getLoop() != L)
> + return false;
> + // Verifying that other operand is an Extend.
> + if (ExtKind == SignExtended) {
> + if (!isa<SCEVSignExtendExpr>(ExtendOperExpr))
> + return false;
> + } else {
> + if (!isa<SCEVZeroExtendExpr>(ExtendOperExpr))
> + return false;
> + }
> +
> + if (ExtKind == SignExtended) {
> + for (Use &U : NarrowUse->uses()) {
> + SExtInst *User = dyn_cast<SExtInst>(U.getUser());
> + if (!User || User->getType() != WideType)
> + return false;
> + }
> + } else { // ExtKind == ZeroExtended
> + for (Use &U : NarrowUse->uses()) {
> + ZExtInst *User = dyn_cast<ZExtInst>(U.getUser());
> + if (!User || User->getType() != WideType)
> + return false;
> + }
> + }
This and the previous block of restrictions seem awfully narrow with no
clear reasoning of why they need to be.
> +
> + return true;
> +}
> +
> +/// Special Case for widening with variant Loads (see
> +/// WidenIV::widenWithVariantLoadUse). This is the code generation part.
> +void WidenIV::widenWithVariantLoadUseCodegen(NarrowIVDefUse DU) {
> + Instruction *NarrowUse = DU.NarrowUse;
> + Instruction *NarrowDef = DU.NarrowDef;
> + Instruction *WideDef = DU.WideDef;
> +
> + ExtendKind ExtKind = getExtendKind(NarrowDef);
> +
> + LLVM_DEBUG(dbgs() << "Cloning arithmetic IVUser: " << *NarrowUse << "\n");
> +
> + // Generating a widening use instruction.
> + Value *LHS = (NarrowUse->getOperand(0) == NarrowDef)
> + ? WideDef
> + : createExtendInst(NarrowUse->getOperand(0), WideType,
> + ExtKind, NarrowUse);
> + Value *RHS = (NarrowUse->getOperand(1) == NarrowDef)
> + ? WideDef
> + : createExtendInst(NarrowUse->getOperand(1), WideType,
> + ExtKind, NarrowUse);
> +
> + auto *NarrowBO = cast<BinaryOperator>(NarrowUse);
> + auto *WideBO = BinaryOperator::Create(NarrowBO->getOpcode(), LHS, RHS,
> + NarrowBO->getName());
> + IRBuilder<> Builder(NarrowUse);
> + Builder.Insert(WideBO);
> + WideBO->copyIRFlags(NarrowBO);
> +
> + if (ExtKind == SignExtended)
> + ExtendKindMap[NarrowUse] = SignExtended;
> + else
> + ExtendKindMap[NarrowUse] = ZeroExtended;
> +
> + // Update the Use.
> + if (ExtKind == SignExtended) {
> + for (Use &U : NarrowUse->uses()) {
> + SExtInst *User = dyn_cast<SExtInst>(U.getUser());
> + if (User && User->getType() == WideType) {
> + LLVM_DEBUG(dbgs() << "INDVARS: eliminating " << *User << " replaced by "
> + << *WideBO << "\n");
> + ++NumElimExt;
> + User->replaceAllUsesWith(WideBO);
> + DeadInsts.emplace_back(User);
> + }
> + }
> + } else { // ExtKind == ZeroExtended
> + for (Use &U : NarrowUse->uses()) {
> + ZExtInst *User = dyn_cast<ZExtInst>(U.getUser());
> + if (User && User->getType() == WideType) {
> + LLVM_DEBUG(dbgs() << "INDVARS: eliminating " << *User << " replaced by "
> + << *WideBO << "\n");
> + ++NumElimExt;
> + User->replaceAllUsesWith(WideBO);
> + DeadInsts.emplace_back(User);
> + }
> + }
> + }
> +}
> +
> /// Determine whether an individual user of the narrow IV can be widened. If so,
> /// return the wide clone of the user.
> Instruction *WidenIV::widenIVUse(NarrowIVDefUse DU, SCEVExpander &Rewriter) {
> @@ -1458,6 +1600,16 @@ Instruction *WidenIV::widenIVUse(NarrowI
> if (widenLoopCompare(DU))
> return nullptr;
>
> + // We are here about to generate a truncate instruction that may hurt
> + // performance because the scalar evolution expression computed earlier
> + // in WideAddRec.first does not indicate a polynomial induction expression.
> + // In that case, look at the operands of the use instruction to determine
> + // if we can still widen the use instead of truncating its operand.
> + if (widenWithVariantLoadUse(DU)) {
> + widenWithVariantLoadUseCodegen(DU);
> + return nullptr;
> + }
> +
> // This user does not evaluate to a recurrence after widening, so don't
> // follow it. Instead insert a Trunc to kill off the original use,
> // eventually isolating the original narrow IV so it can be removed.
>
> Modified: llvm/trunk/test/Transforms/IndVarSimplify/iv-widen-elim-ext.ll
> URL: http://llvm.org/viewvc/llvm-project/llvm/trunk/test/Transforms/IndVarSimplify/iv-widen-elim-ext.ll?rev=341726&r1=341725&r2=341726&view=diff
> ==============================================================================
> --- llvm/trunk/test/Transforms/IndVarSimplify/iv-widen-elim-ext.ll (original)
> +++ llvm/trunk/test/Transforms/IndVarSimplify/iv-widen-elim-ext.ll Fri Sep 7 15:41:57 2018
> @@ -273,3 +273,87 @@ for.end:
> %call = call i32 @dummy(i32* getelementptr inbounds ([100 x i32], [100 x i32]* @a, i32 0, i32 0), i32* getelementptr inbounds ([100 x i32], [100 x i32]* @b, i32 0, i32 0))
> ret i32 0
> }
The testing included here is insufficient. Specifically:
1) The tests do not appear to be maximally reduced.
2) The tests do not clearly show what the expected output is. (i.e.
positive check)
3) It includes only minimal negative tests (i.e. exercising cases which
shouldn't trigger). Clearly missing cases include: non-load RHS, other
binary op types, missing nsw/nuw, etc...
> +
> +%struct.image = type {i32, i32}
> +define i32 @foo4(%struct.image* %input, i32 %length, i32* %in) {
> +entry:
> + %stride = getelementptr inbounds %struct.image, %struct.image* %input, i64 0, i32 1
> + %0 = load i32, i32* %stride, align 4
> + %cmp17 = icmp sgt i32 %length, 1
> + br i1 %cmp17, label %for.body.lr.ph, label %for.cond.cleanup
> +
> +for.body.lr.ph: ; preds = %entry
> + %channel = getelementptr inbounds %struct.image, %struct.image* %input, i64 0, i32 0
> + br label %for.body
> +
> +for.cond.cleanup.loopexit: ; preds = %for.body
> + %1 = phi i32 [ %6, %for.body ]
> + br label %for.cond.cleanup
> +
> +for.cond.cleanup: ; preds = %for.cond.cleanup.loopexit, %entry
> + %2 = phi i32 [ 0, %entry ], [ %1, %for.cond.cleanup.loopexit ]
> + ret i32 %2
> +
> +; mul instruction below is widened instead of generating a truncate instruction for it
> +; regardless if Load operand of mul is inside or outside the loop (we have both cases).
> +; CHECK: for.body:
> +; CHECK-NOT: trunc
> +for.body: ; preds = %for.body.lr.ph, %for.body
> + %x.018 = phi i32 [ 1, %for.body.lr.ph ], [ %add, %for.body ]
> + %add = add nuw nsw i32 %x.018, 1
> + %3 = load i32, i32* %channel, align 8
> + %mul = mul nsw i32 %3, %add
> + %idx.ext = sext i32 %mul to i64
> + %add.ptr = getelementptr inbounds i32, i32* %in, i64 %idx.ext
> + %4 = load i32, i32* %add.ptr, align 4
> + %mul1 = mul nsw i32 %0, %add
> + %idx.ext1 = sext i32 %mul1 to i64
> + %add.ptr1 = getelementptr inbounds i32, i32* %in, i64 %idx.ext1
> + %5 = load i32, i32* %add.ptr1, align 4
> + %6 = add i32 %4, %5
> + %cmp = icmp slt i32 %add, %length
> + br i1 %cmp, label %for.body, label %for.cond.cleanup.loopexit
> +}
> +
> +
> +define i32 @foo5(%struct.image* %input, i32 %length, i32* %in) {
> +entry:
> + %stride = getelementptr inbounds %struct.image, %struct.image* %input, i64 0, i32 1
> + %0 = load i32, i32* %stride, align 4
> + %cmp17 = icmp sgt i32 %length, 1
> + br i1 %cmp17, label %for.body.lr.ph, label %for.cond.cleanup
> +
> +for.body.lr.ph: ; preds = %entry
> + %channel = getelementptr inbounds %struct.image, %struct.image* %input, i64 0, i32 0
> + br label %for.body
> +
> +for.cond.cleanup.loopexit: ; preds = %for.body
> + %1 = phi i32 [ %7, %for.body ]
> + br label %for.cond.cleanup
> +
> +for.cond.cleanup: ; preds = %for.cond.cleanup.loopexit, %entry
> + %2 = phi i32 [ 0, %entry ], [ %1, %for.cond.cleanup.loopexit ]
> + ret i32 %2
> +
> +; This example is the same as above except that the first mul is used in two places
> +; and this may result in having two versions of the multiply: an i32 and i64 version.
> +; In this case, keep the trucate instructions to avoid this redundancy.
> +; CHECK: for.body:
> +; CHECK: trunc
> +for.body: ; preds = %for.body.lr.ph, %for.body
> + %x.018 = phi i32 [ 1, %for.body.lr.ph ], [ %add, %for.body ]
> + %add = add nuw nsw i32 %x.018, 1
> + %3 = load i32, i32* %channel, align 8
> + %mul = mul nsw i32 %3, %add
> + %idx.ext = sext i32 %mul to i64
> + %add.ptr = getelementptr inbounds i32, i32* %in, i64 %idx.ext
> + %4 = load i32, i32* %add.ptr, align 4
> + %mul1 = mul nsw i32 %0, %add
> + %idx.ext1 = sext i32 %mul1 to i64
> + %add.ptr1 = getelementptr inbounds i32, i32* %in, i64 %idx.ext1
> + %5 = load i32, i32* %add.ptr1, align 4
> + %6 = add i32 %4, %5
> + %7 = add i32 %6, %mul
> + %cmp = icmp slt i32 %add, %length
> + br i1 %cmp, label %for.body, label %for.cond.cleanup.loopexit
> +}
>
>
> _______________________________________________
> llvm-commits mailing list
> llvm-commits at lists.llvm.org
> http://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-commits
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.llvm.org/pipermail/llvm-commits/attachments/20180910/1322c0bd/attachment.html>
More information about the llvm-commits
mailing list