[polly] r307650 - [Polly][CMake] Use the CMake Package instead of llvm-config in out-of-tree builds
Philip Pfaffe via llvm-commits
llvm-commits at lists.llvm.org
Wed Jul 19 12:16:35 PDT 2017
I'll have to recant my previous assumption, it looks like (at least)
http://lab.llvm.org:8011/builders/polly-amd64-linux/ builds polly in tree.
This mistake might even explain a few spurious fails on that bot.
I'll commit.
Cheers,
Philip
2017-07-19 21:07 GMT+02:00 Philip Pfaffe <philip.pfaffe at gmail.com>:
> I don't want to push this out if there aren't any buildbots testing it.
> The patch fixes the problem for me. Does it work for you? Any idea why it
> didn't break anyone else?
>
> I'll commit the fix if you can confirm that it actually works.
>
> Cheers,
> Philip
>
> 2017-07-19 15:26 GMT+02:00 Philip Pfaffe <philip.pfaffe at gmail.com>:
>
>> Removing the dependency on llvm-config and opt was not intended! Aren't
>> there any buildbots testing this?
>>
>> If so, can you try if this patch works for you?
>> --- a/test/CMakeLists.txt
>> +++ b/test/CMakeLists.txt
>> @@ -28,14 +28,15 @@ if(NOT LLVM_MAIN_SRC_DIR)
>> if ("${POLLY_TEST_EXTRA_PATHS}" STREQUAL "${LLVM_TOOLS_BINARY_DIR}")
>> set(POLLY_TEST_EXTRA_PATHS "")
>> endif()
>> + set(POLLY_TEST_DEPS LLVMPolly)
>> else ()
>> set(LLVM_OPT "${LLVM_TOOLS_BINARY_DIR}/opt")
>> set(LLVM_FILECHECK "${LLVM_TOOLS_BINARY_DIR}/FileCheck")
>> set(LLVM_NOT "${LLVM_TOOLS_BINARY_DIR}/not")
>> set(POLLY_TEST_EXTRA_PATHS "")
>> + set(POLLY_TEST_DEPS llvm-config opt LLVMPolly FileCheck not)
>> endif()
>>
>> -set(POLLY_TEST_DEPS LLVMPolly)
>> if (POLLY_BUNDLED_ISL)
>> list(APPEND POLLY_TEST_DEPS polly-isl-test)
>> endif()
>>
>> 2017-07-19 13:52 GMT+02:00 Michael Kruse <llvm-commits at meinersbur.de>:
>>
>>> A post-commit review.
>>>
>>> 2017-07-11 13:24 GMT+02:00 Philip Pfaffe via llvm-commits
>>> <llvm-commits at lists.llvm.org>:
>>> > Author: pfaffe
>>> > Date: Tue Jul 11 04:24:25 2017
>>> > New Revision: 307650
>>> >
>>> > URL: http://llvm.org/viewvc/llvm-project?rev=307650&view=rev
>>> > Log:
>>> > [Polly][CMake] Use the CMake Package instead of llvm-config in
>>> out-of-tree builds
>>>
>>> Could you please remove the "[Polly]" tag before committing? There is
>>> no point of it in the Polly repository. Thank you.
>>>
>>>
>>>
>>> > Summary:
>>> > As of now, Polly uses llvm-config to set up LLVM dependencies in an
>>> out-of-tree build.
>>> >
>>> > This is problematic for two reasons:
>>> > 1) Right now, in-tree and out-of-tree builds in fact do different
>>> things. E.g., in an in-tree build, libPolly depends on a handful of LLVM
>>> libraries, while in an out-of-tree build it depends on all of them. This
>>> means that we often need to treat both paths seperately.
>>> > 2) I'm specifically unhappy with the way libPolly is linked right now,
>>> because it just blindly links against all the LLVM libs. That doesn't make
>>> a lot of sense. For instance, one of these libs is LLVMTableGen, which
>>> contains a command line definition of a -o option. This means that I can
>>> not link an out-of-tree libPolly into a tool which might want to offer a -o
>>> option as well.
>>> >
>>> > This patch (mostly) drop the use of llvm-config in favor of LLVMs
>>> exported cmake package. However, building Polly with unittests requires
>>> access to the gtest sources (in the LLVM source tree). If we're building
>>> against an LLVM installation, this source tree is unavailable and must
>>> specified. I'm using llvm-config to provide a default in this case.
>>> >
>>> > Reviewers: Meinersbur, grosser
>>> >
>>> > Reviewed By: grosser
>>> >
>>> > Subscribers: tstellar, bollu, chapuni, mgorny, pollydev, llvm-commits
>>> >
>>> > Differential Revision: https://reviews.llvm.org/D33299
>>> >
>>> > Modified:
>>> > polly/trunk/CMakeLists.txt
>>> > polly/trunk/cmake/CMakeLists.txt
>>> > polly/trunk/lib/CMakeLists.txt
>>> > polly/trunk/test/CMakeLists.txt
>>> > polly/trunk/test/lit.cfg
>>> > polly/trunk/test/lit.site.cfg.in
>>> >
>>> > Modified: polly/trunk/CMakeLists.txt
>>> > URL: http://llvm.org/viewvc/llvm-project/polly/trunk/CMakeLists.t
>>> xt?rev=307650&r1=307649&r2=307650&view=diff
>>> > ============================================================
>>> ==================
>>> > --- polly/trunk/CMakeLists.txt (original)
>>> > +++ polly/trunk/CMakeLists.txt Tue Jul 11 04:24:25 2017
>>> > @@ -4,112 +4,57 @@ if (NOT DEFINED LLVM_MAIN_SRC_DIR)
>>> > cmake_minimum_required(VERSION 3.4.3)
>>> >
>>> > # Where is LLVM installed?
>>> > - set(LLVM_INSTALL_ROOT "" CACHE PATH "Root of LLVM install.")
>>> > - # Check if the LLVM_INSTALL_ROOT valid.
>>> > - if( NOT EXISTS ${LLVM_INSTALL_ROOT}/include/llvm )
>>> > - message(FATAL_ERROR "LLVM_INSTALL_ROOT (${LLVM_INSTALL_ROOT}) is
>>> not a valid LLVM installation.")
>>> > - endif(NOT EXISTS ${LLVM_INSTALL_ROOT}/include/llvm)
>>> > - # FileCheck, not and llvm-lit are not install by default, warn the
>>> user to copy them.
>>> > - if( NOT EXISTS ${LLVM_INSTALL_ROOT}/bin/FileCheck
>>> > - OR NOT EXISTS ${LLVM_INSTALL_ROOT}/bin/not
>>> > - OR NOT EXISTS ${LLVM_INSTALL_ROOT}/bin/llvm-lit )
>>> > - message(WARNING "'FileCheck', 'not' and 'llvm-lit' are required
>>> by running regress tests, "
>>> > - "but they are not installed! Please copy them to "
>>> > - "${LLVM_INSTALL_ROOT}/bin.")
>>> > - endif()
>>> > - # Add the llvm header path.
>>> > - include_directories(${LLVM_INSTALL_ROOT}/include/)
>>> > + find_package(LLVM CONFIG REQUIRED)
>>> > + set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} ${LLVM_CMAKE_DIR})
>>> > + include(HandleLLVMOptions)
>>> > + include(AddLLVM)
>>> >
>>> > - # Get LLVM's own libraries.
>>> > - execute_process(COMMAND "${LLVM_INSTALL_ROOT}/bin/llvm-config"
>>> --libs
>>> > - OUTPUT_VARIABLE LLVM_LIBS
>>> > - OUTPUT_STRIP_TRAILING_WHITESPACE)
>>> > -
>>> > - # Get the system librarys that will link into LLVM.
>>> > - execute_process(COMMAND "${LLVM_INSTALL_ROOT}/bin/llvm-config"
>>> --system-libs
>>> > - OUTPUT_VARIABLE LLVM_SYSTEM_LIBS
>>> > - OUTPUT_STRIP_TRAILING_WHITESPACE)
>>> > - message(STATUS "System libs required by LLVM: ${LLVM_SYSTEM_LIBS}")
>>> > -
>>> > - # Determine where LLVM stores its libraries.
>>> > - execute_process(COMMAND "${LLVM_INSTALL_ROOT}/bin/llvm-config"
>>> --libdir
>>> > - OUTPUT_VARIABLE LLVM_LIBRARY_DIR
>>> > - OUTPUT_STRIP_TRAILING_WHITESPACE)
>>> > - link_directories("${LLVM_LIBRARY_DIR}")
>>> > -
>>> > - # Now set the header paths.
>>> > - execute_process(COMMAND "${LLVM_INSTALL_ROOT}/bin/llvm-config"
>>> --includedir
>>> > - OUTPUT_VARIABLE LLVM_INCLUDE_DIR
>>> > - OUTPUT_STRIP_TRAILING_WHITESPACE)
>>> > - include_directories( ${LLVM_INCLUDE_DIR} )
>>> > -
>>> > - # Get the TARGET_TRIPLE
>>> > - execute_process(COMMAND "${LLVM_INSTALL_ROOT}/bin/llvm-config"
>>> --host-target
>>> > - OUTPUT_VARIABLE TARGET_TRIPLE
>>> > - OUTPUT_STRIP_TRAILING_WHITESPACE)
>>> > -
>>> > - # And then set the cxx flags.
>>> > - execute_process(COMMAND "${LLVM_INSTALL_ROOT}/bin/llvm-config"
>>> --cxxflags
>>> > - OUTPUT_VARIABLE LLVM_CXX_FLAGS
>>> > - OUTPUT_STRIP_TRAILING_WHITESPACE)
>>> > - set(CMAKE_CXX_FLAGS ${CMAKE_CXX_FLAGS} ${LLVM_CXX_FLAGS})
>>> > -
>>> > - # Check LLVM_ENABLE_ASSERTIONS
>>> > - execute_process(COMMAND "${LLVM_INSTALL_ROOT}/bin/llvm-config"
>>> --assertion-mode
>>> > - OUTPUT_VARIABLE LLVM_ENABLE_ASSERTIONS
>>> > - OUTPUT_STRIP_TRAILING_WHITESPACE)
>>> > - # Copied from LLVM's HandleLLVMOptions.cmake
>>> > - if( LLVM_ENABLE_ASSERTIONS )
>>> > - # MSVC doesn't like _DEBUG on release builds. See PR 4379.
>>> > - if( NOT MSVC )
>>> > - add_definitions( -D_DEBUG )
>>> > - endif()
>>> > - # On non-Debug builds cmake automatically defines NDEBUG, so we
>>> > - # explicitly undefine it:
>>> > - if( NOT uppercase_CMAKE_BUILD_TYPE STREQUAL "DEBUG" )
>>> > - add_definitions( -UNDEBUG )
>>> > - # Also remove /D NDEBUG to avoid MSVC warnings about
>>> conflicting defines.
>>> > - foreach (flags_var_to_scrub
>>> > - CMAKE_CXX_FLAGS_RELEASE
>>> > - CMAKE_CXX_FLAGS_RELWITHDEBINFO
>>> > - CMAKE_CXX_FLAGS_MINSIZEREL
>>> > - CMAKE_C_FLAGS_RELEASE
>>> > - CMAKE_C_FLAGS_RELWITHDEBINFO
>>> > - CMAKE_C_FLAGS_MINSIZEREL)
>>> > - string (REGEX REPLACE "(^| )[/-]D *NDEBUG($| )" " "
>>> > - "${flags_var_to_scrub}" "${${flags_var_to_scrub}}")
>>> > - endforeach()
>>> > - endif()
>>> > - endif()
>>> > + # Add the llvm header path.
>>> > + include_directories(${LLVM_INCLUDE_DIRS})
>>> >
>>> > # Sources available, too?
>>> > - execute_process(COMMAND "${LLVM_INSTALL_ROOT}/bin/llvm-config"
>>> --src-root
>>> > - OUTPUT_VARIABLE MAIN_SRC_DIR
>>> > - OUTPUT_STRIP_TRAILING_WHITESPACE)
>>> > - set(LLVM_SOURCE_ROOT ${MAIN_SRC_DIR} CACHE PATH "Path to LLVM
>>> source tree")
>>> > + if (LLVM_BUILD_MAIN_SRC_DIR)
>>> > + set(LLVM_SOURCE_ROOT ${LLVM_BUILD_MAIN_SRC_DIR} CACHE PATH
>>> > + "Path to LLVM source tree")
>>> > + else()
>>> > + execute_process(COMMAND "${LLVM_TOOLS_BINARY_DIR}/llvm-config"
>>> --src-root
>>> > + OUTPUT_VARIABLE MAIN_SRC_DIR
>>> > + OUTPUT_STRIP_TRAILING_WHITESPACE)
>>> > + set(LLVM_SOURCE_ROOT ${MAIN_SRC_DIR} CACHE PATH "Path to LLVM
>>> source tree")
>>> > + endif()
>>> >
>>> > # Enable unit tests if available.
>>> > set(UNITTEST_DIR ${LLVM_SOURCE_ROOT}/utils/unittest)
>>> > if(EXISTS ${UNITTEST_DIR}/googletest/include/gtest/gtest.h)
>>> > - add_library(gtest
>>> > - ${UNITTEST_DIR}/googletest/src/gtest-all.cc
>>> > - ${UNITTEST_DIR}/googlemock/src/gmock-all.cc
>>> > - )
>>> > - target_include_directories(gtest
>>> > - PUBLIC
>>> > - "${UNITTEST_DIR}/googletest/include"
>>> > - "${UNITTEST_DIR}/googlemock/include"
>>> > -
>>> > - PRIVATE
>>> > - "${UNITTEST_DIR}/googletest"
>>> > - "${UNITTEST_DIR}/googlemock"
>>> > - )
>>> > - target_link_libraries(gtest -lpthread)
>>> > + # The build tree already exports the gtest target, which we can
>>> reuse
>>> > + if (TARGET gtest)
>>> > + # LLVM Doesn't export gtest's include directorys, so do that
>>> here
>>> > + set_target_properties(gtest
>>> > + PROPERTIES INTERFACE_INCLUDE_DIRECTORIES
>>> > + "${UNITTEST_DIR}/googletest/include;${UNITTEST_DIR}/googlemo
>>> ck/include"
>>> > + )
>>> > + set(POLLY_GTEST_AVAIL 1)
>>> > + else()
>>> > + add_library(gtest
>>> > + ${UNITTEST_DIR}/googletest/src/gtest-all.cc
>>> > + ${UNITTEST_DIR}/googlemock/src/gmock-all.cc
>>> > + )
>>> > + target_include_directories(gtest
>>> > + PUBLIC
>>> > + "${UNITTEST_DIR}/googletest/include"
>>> > + "${UNITTEST_DIR}/googlemock/include"
>>> > +
>>> > + PRIVATE
>>> > + "${UNITTEST_DIR}/googletest"
>>> > + "${UNITTEST_DIR}/googlemock"
>>> > + )
>>> > + target_link_libraries(gtest -lpthread)
>>> >
>>> > - add_library(gtest_main ${UNITTEST_DIR}/UnitTestMain/TestMain.cpp)
>>> > - target_link_libraries(gtest_main gtest)
>>> > + add_library(gtest_main ${UNITTEST_DIR}/UnitTestMain/T
>>> estMain.cpp)
>>> > + target_link_libraries(gtest_main gtest)
>>> >
>>> > - set(POLLY_GTEST_AVAIL 1)
>>> > + set(POLLY_GTEST_AVAIL 1)
>>> > + endif()
>>> > endif()
>>> >
>>> > # Make sure the isl c files are built as fPIC
>>> >
>>> > Modified: polly/trunk/cmake/CMakeLists.txt
>>> > URL: http://llvm.org/viewvc/llvm-project/polly/trunk/cmake/CMakeL
>>> ists.txt?rev=307650&r1=307649&r2=307650&view=diff
>>> > ============================================================
>>> ==================
>>> > --- polly/trunk/cmake/CMakeLists.txt (original)
>>> > +++ polly/trunk/cmake/CMakeLists.txt Tue Jul 11 04:24:25 2017
>>> > @@ -1,9 +1,4 @@
>>> > # Keep this in sync with llvm/cmake/CMakeLists.txt!
>>> > -if (LLVM_INSTALL_ROOT)
>>> > - # this simplifies things down the road, by not requiring to
>>> distinguish
>>> > - # between in-tree and out of tree builds
>>> > - set(LLVM_BINARY_DIR ${LLVM_INSTALL_ROOT})
>>> > -endif()
>>> >
>>> > set(LLVM_INSTALL_PACKAGE_DIR "lib${LLVM_LIBDIR_SUFFIX}/cmake/llvm")
>>> > set(POLLY_INSTALL_PACKAGE_DIR "lib${LLVM_LIBDIR_SUFFIX}/cmake/polly")
>>> >
>>> > Modified: polly/trunk/lib/CMakeLists.txt
>>> > URL: http://llvm.org/viewvc/llvm-project/polly/trunk/lib/CMakeLis
>>> ts.txt?rev=307650&r1=307649&r2=307650&view=diff
>>> > ============================================================
>>> ==================
>>> > --- polly/trunk/lib/CMakeLists.txt (original)
>>> > +++ polly/trunk/lib/CMakeLists.txt Tue Jul 11 04:24:25 2017
>>> > @@ -79,59 +79,42 @@ if (GPU_CODEGEN)
>>> > target_link_libraries(Polly PollyPPCG)
>>> > endif ()
>>> >
>>> > -# Add Polly's LLVM dependencies.
>>> > -# When built inside the LLVM source tree, these are CMake targets
>>> that will
>>> > -# depend on their dependencies and CMake ensures they are added in
>>> the right
>>> > -# order.
>>> > -# If Polly is built independently, just add all LLVM libraries.
>>> LLVM_ROOT_DIR
>>> > -# might have been configured to compile to individual libraries or a
>>> single
>>> > -# libLLVM.so (called dylib), reported by llvm-config, so there is no
>>> fixed list
>>> > -# of required libraries.
>>> > -if (DEFINED LLVM_MAIN_SRC_DIR)
>>> >
>>> > - # Polly-ACC requires the NVPTX backend to work. Ask LLVM about its
>>> libraries.
>>> > - set(nvptx_libs)
>>> > - if (GPU_CODEGEN)
>>> > - # This call emits an error if they NVPTX backend is not enable.
>>> > - llvm_map_components_to_libnames(nvptx_libs NVPTX)
>>> > - endif ()
>>> > +# Polly-ACC requires the NVPTX backend to work. Ask LLVM about its
>>> libraries.
>>> > +set(nvptx_libs)
>>> > +if (GPU_CODEGEN)
>>> > + # This call emits an error if they NVPTX backend is not enable.
>>> > + llvm_map_components_to_libnames(nvptx_libs NVPTX)
>>> > +endif ()
>>> >
>>> > - if (LLVM_LINK_LLVM_DYLIB)
>>> > - # The shlib/dylib contains all the LLVM components
>>> > - # (including NVPTX is enabled) already. Adding them to
>>> target_link_libraries
>>> > - # would cause them being twice in the address space
>>> > - # (their LLVM*.a/so and their copies in libLLVM.so)
>>> > - # which results in errors when the two instances try to register
>>> the same
>>> > - # command-line switches.
>>> > - target_link_libraries(Polly LLVM)
>>> > - else ()
>>> > - target_link_libraries(Polly
>>> > - LLVMSupport
>>> > - LLVMCore
>>> > - LLVMScalarOpts
>>> > - LLVMInstCombine
>>> > - LLVMTransformUtils
>>> > - LLVMAnalysis
>>> > - LLVMipo
>>> > - LLVMMC
>>> > - LLVMPasses
>>> > - ${nvptx_libs}
>>> > -# The libraries below are required for darwin: http://PR26392
>>> > - LLVMBitReader
>>> > - LLVMMCParser
>>> > - LLVMObject
>>> > - LLVMProfileData
>>> > - LLVMTarget
>>> > - LLVMVectorize
>>> > - )
>>> > - endif ()
>>> > +if (LLVM_LINK_LLVM_DYLIB)
>>> > + # The shlib/dylib contains all the LLVM components
>>> > + # (including NVPTX is enabled) already. Adding them to
>>> target_link_libraries
>>> > + # would cause them being twice in the address space
>>> > + # (their LLVM*.a/so and their copies in libLLVM.so)
>>> > + # which results in errors when the two instances try to register
>>> the same
>>> > + # command-line switches.
>>> > + target_link_libraries(Polly LLVM)
>>> > else ()
>>> > - # When Polly-ACC is enabled, we assume that the host LLVM was also
>>> built with
>>> > - # the NVPTX target enabled.
>>> > target_link_libraries(Polly
>>> > - ${LLVM_LIBS}
>>> > - ${LLVM_SYSTEM_LIBS}
>>> > - )
>>> > + LLVMSupport
>>> > + LLVMCore
>>> > + LLVMScalarOpts
>>> > + LLVMInstCombine
>>> > + LLVMTransformUtils
>>> > + LLVMAnalysis
>>> > + LLVMipo
>>> > + LLVMMC
>>> > + LLVMPasses
>>> > + ${nvptx_libs}
>>> > + # The libraries below are required for darwin: http://PR26392
>>> > + LLVMBitReader
>>> > + LLVMMCParser
>>> > + LLVMObject
>>> > + LLVMProfileData
>>> > + LLVMTarget
>>> > + LLVMVectorize
>>> > + )
>>> > endif ()
>>> >
>>> > # Create a loadable module Polly.so that can be loaded using
>>> >
>>> > Modified: polly/trunk/test/CMakeLists.txt
>>> > URL: http://llvm.org/viewvc/llvm-project/polly/trunk/test/CMakeLi
>>> sts.txt?rev=307650&r1=307649&r2=307650&view=diff
>>> > ============================================================
>>> ==================
>>> > --- polly/trunk/test/CMakeLists.txt (original)
>>> > +++ polly/trunk/test/CMakeLists.txt Tue Jul 11 04:24:25 2017
>>> > @@ -1,178 +1,109 @@
>>> > -set(POLLY_SOURCE_DIR "${CMAKE_CURRENT_SOURCE_DIR}/..")
>>> > -set(POLLY_BINARY_DIR "${CMAKE_CURRENT_BINARY_DIR}/..")
>>> > set(LLVM_SHLIBEXT "${CMAKE_SHARED_MODULE_SUFFIX}")
>>> >
>>> > add_custom_target(check-polly)
>>> > set_target_properties(check-polly PROPERTIES FOLDER "Polly")
>>> >
>>> > -if (NOT DEFINED LLVM_MAIN_SRC_DIR)
>>> > -
>>> > - # We are building polly out of tree, adjust the settings.
>>> > - # FIXME: FileCheck is not available in llvm install directory at
>>> the moment.
>>> > - set(LLVM_LIT ${LLVM_INSTALL_ROOT}/bin/llvm-lit)
>>> > - if (POLLY_BUNDLED_ISL)
>>> > - set(POLLY_TEST_DEPS LLVMPolly polly-isl-test)
>>> > - endif (POLLY_BUNDLED_ISL)
>>> > - if (POLLY_GTEST_AVAIL)
>>> > - list(APPEND POLLY_TEST_DEPS PollyUnitTests)
>>> > - endif ()
>>> > -
>>> > - set(LLVM_BINARY_DIR "${LLVM_INSTALL_ROOT}")
>>> > - set(LLVM_TOOLS_DIR "${LLVM_INSTALL_ROOT}/bin")
>>> > - set(LLVM_LIBS_DIR "${LLVM_INSTALL_ROOT}/lib")
>>> > - set(POLLY_LIB_DIR "${POLLY_BINARY_DIR}/lib")
>>> > -
>>> > - include(FindPythonInterp)
>>> > - if(PYTHONINTERP_FOUND)
>>> > - option(POLLY_TEST_DISABLE_BAR "Run Polly tests with
>>> --no-progress-bar" OFF)
>>> > - set(POLLY_TEST_EXTRA_ARGS)
>>> > - if (MSVC OR XCODE OR POLLY_TEST_DISABLE_BAR)
>>> > - set(POLLY_TEST_EXTRA_ARGS "--no-progress-bar")
>>> > - endif()
>>> > -
>>> > - option(POLLY_TEST_USE_VG "Run Polly tests under Valgrind" OFF)
>>> > - if(POLLY_TEST_USE_VG)
>>> > - set(POLLY_TEST_EXTRA_ARGS ${POLLY_TEST_EXTRA_ARGS} "--vg")
>>> > - endif ()
>>> > -
>>> > - # Parameters required for lit.site.cfg.in
>>> > - set(LLVM_SOURCE_DIR ${LLVM_SOURCE_ROOT})
>>> > - if (CMAKE_CFG_INTDIR STREQUAL ".")
>>> > - set(LLVM_BUILD_MODE ".")
>>> > - else ()
>>> > - set(LLVM_BUILD_MODE "%(build_mode)s")
>>> > - endif ()
>>> > - set(ENABLE_SHARED "1")
>>> > - set(SHLIBDIR "${LLVM_BINARY_DIR}/bin")
>>> > - set(LINK_POLLY_INTO_TOOLS "OFF")
>>> > -
>>> > - configure_file(
>>> > - ${CMAKE_CURRENT_SOURCE_DIR}/lit.site.cfg.in
>>> > - ${CMAKE_CURRENT_BINARY_DIR}/lit.site.cfg)
>>> > -
>>> > - add_custom_target(check-polly-tests
>>> > - COMMAND ${LLVM_LIT}
>>> > - --param polly_site_config=${CMAKE_CURR
>>> ENT_BINARY_DIR}/lit.site.cfg
>>> > - --param polly_unit_site_config=${CMAKE
>>> _CURRENT_BINARY_DIR}/Unit/lit.site.cfg
>>> > - --param build_config=${CMAKE_CFG_INTDIR}
>>> > - -sv ${POLLY_TEST_EXTRA_ARGS}
>>> > - ${CMAKE_CURRENT_BINARY_DIR}
>>> > - DEPENDS ${POLLY_TEST_DEPS}
>>> > - COMMENT "Running Polly regression/unit tests")
>>> > - set_target_properties(check-polly-tests PROPERTIES FOLDER
>>> "Polly")
>>> > - add_dependencies(check-polly check-polly-tests)
>>> > -
>>> > - if (POLLY_GTEST_AVAIL)
>>> > - configure_file(
>>> > - ${CMAKE_CURRENT_SOURCE_DIR}/Unit/lit.site.cfg.in
>>> > - ${CMAKE_CURRENT_BINARY_DIR}/Unit/lit.site.cfg)
>>> > -
>>> > - add_custom_target(check-polly-unittests
>>> > - COMMAND ${LLVM_LIT}
>>> > - --param polly_site_config=${CMAKE_CURR
>>> ENT_BINARY_DIR}/Unit/lit.site.cfg
>>> > - --param build_config=${CMAKE_CFG_INTDIR}
>>> > - -sv ${POLLY_TEST_EXTRA_ARGS}
>>> > - ${CMAKE_CURRENT_BINARY_DIR}/Unit
>>> > - DEPENDS PollyUnitTests
>>> > - COMMENT "Running Polly unit tests")
>>> > - set_target_properties(check-polly-unittests PROPERTIES FOLDER
>>> "Polly")
>>> > - endif ()
>>> > - configure_file(
>>> > - ${CMAKE_CURRENT_SOURCE_DIR}/UnitIsl/lit.site.cfg.in
>>> > - ${CMAKE_CURRENT_BINARY_DIR}/UnitIsl/lit.site.cfg)
>>> > -
>>> > -
>>> > - if (POLLY_BUNDLED_ISL)
>>> > - add_custom_target(check-polly-isl
>>> > - command ${LLVM_LIT}
>>> > - --param polly_site_config=${CMAKE_CURR
>>> ENT_BINARY_DIR}/UnitIsl/lit.site.cfg
>>> > - --param build_config=${CMAKE_CFG_INTDIR}
>>> > - -sv ${POLLY_TEST_EXTRA_ARGS}
>>> > - ${CMAKE_CURRENT_BINARY_DIR}
>>> > - DEPENDS polly-isl-test
>>> > - COMMENT "Running isl unit tests")
>>> > - set_target_properties(check-polly-isl PROPERTIES FOLDER
>>> "Polly")
>>> > - endif (POLLY_BUNDLED_ISL)
>>> > +if(NOT LLVM_MAIN_SRC_DIR)
>>> > + find_program(LLVM_OPT NAMES opt HINTS ${LLVM_TOOLS_BINARY_DIR})
>>> > + find_program(LLVM_FILECHECK NAMES FileCheck HINTS
>>> ${LLVM_TOOLS_BINARY_DIR})
>>> > + find_program(LLVM_NOT NAMES not HINTS ${LLVM_TOOLS_BINARY_DIR})
>>> > + if (NOT LLVM_OPT)
>>> > + message(WARNING "LLVM's opt program could not be found. Please
>>> set LLVM_OPT.")
>>> > endif()
>>> > -
>>> > -else (NOT DEFINED LLVM_MAIN_SRC_DIR)
>>> > -
>>> > - set(LLVM_LIT ${LLVM_TOOLS_BINARY_DIR}/llvm-lit)
>>> > - set(POLLY_TEST_DEPS llvm-config opt LLVMPolly FileCheck not)
>>>
>>> You removed the dependency to llvm-config and opt. Was this intentional?
>>> I got lots of spurious test fails because I didn't know have to
>>> compile them manually before check-polly now.
>>>
>>> > - if (POLLY_BUNDLED_ISL)
>>> > - list(APPEND POLLY_TEST_DEPS polly-isl-test)
>>> > + if (NOT LLVM_FILECHECK)
>>> > + message(WARNING "LLVM's FileCheck program could not be found. "
>>> > + "Please set LLVM_FILECHECK. Please set LLVM_FILECHECK.")
>>> > + endif()
>>> > + if (NOT LLVM_NOT)
>>> > + message(WARNING "LLVM's not program could not be found. Please
>>> set LLVM_NOT.")
>>> > + endif()
>>> > + get_filename_component(EXTRA_PATHS ${LLVM_OPT} DIRECTORY)
>>> > + list(APPEND POLLY_TEST_EXTRA_PATHS "${EXTRA_PATHS}")
>>> > + get_filename_component(EXTRA_PATHS ${LLVM_FILECHECK} DIRECTORY)
>>> > + list(APPEND POLLY_TEST_EXTRA_PATHS "${EXTRA_PATHS}")
>>> > + get_filename_component(EXTRA_PATHS ${LLVM_NOT} DIRECTORY)
>>> > + list(APPEND POLLY_TEST_EXTRA_PATHS "${EXTRA_PATHS}")
>>> > + list(REMOVE_DUPLICATES POLLY_TEST_EXTRA_PATHS)
>>> > + message(STATUS "Extra paths: ${POLLY_TEST_EXTRA_PATHS}")
>>> > + if ("${POLLY_TEST_EXTRA_PATHS}" STREQUAL "${LLVM_TOOLS_BINARY_DIR}")
>>> > + set(POLLY_TEST_EXTRA_PATHS "")
>>> > endif()
>>> > - if (POLLY_GTEST_AVAIL)
>>> > - list(APPEND POLLY_TEST_DEPS PollyUnitTests)
>>> > - endif ()
>>> > -
>>> > - set(LLVM_BINARY_DIR "${LLVM_BINARY_DIR}")
>>> > - set(LLVM_TOOLS_DIR "${LLVM_TOOLS_BINARY_DIR}")
>>> > - set(LLVM_LIBS_DIR "${LLVM_BINARY_DIR}/lib${LLVM_LIBDIR_SUFFIX}")
>>> > - set(POLLY_LIB_DIR "${LLVM_LIBS_DIR}")
>>> > +else ()
>>> > + set(LLVM_OPT "${LLVM_TOOLS_BINARY_DIR}/opt")
>>> > + set(LLVM_FILECHECK "${LLVM_TOOLS_BINARY_DIR}/FileCheck")
>>> > + set(LLVM_NOT "${LLVM_TOOLS_BINARY_DIR}/not")
>>> > + set(POLLY_TEST_EXTRA_PATHS "")
>>> > +endif()
>>> > +
>>> > +set(POLLY_TEST_DEPS LLVMPolly)
>>> > +if (POLLY_BUNDLED_ISL)
>>> > + list(APPEND POLLY_TEST_DEPS polly-isl-test)
>>> > +endif()
>>> > +if (POLLY_GTEST_AVAIL)
>>> > + list(APPEND POLLY_TEST_DEPS PollyUnitTests)
>>> > +endif ()
>>> > +
>>> > +set(LLVM_BINARY_DIR "${LLVM_BINARY_DIR}")
>>> > +set(LLVM_TOOLS_DIR "${LLVM_TOOLS_BINARY_DIR}")
>>> > +set(LLVM_LIBS_DIR "${LLVM_BINARY_DIR}/lib${LLVM_LIBDIR_SUFFIX}")
>>> > +set(POLLY_LIB_DIR "${POLLY_BINARY_DIR}/lib")
>>> > +
>>> > +configure_lit_site_cfg(
>>> > + ${CMAKE_CURRENT_SOURCE_DIR}/lit.site.cfg.in
>>> > + ${CMAKE_CURRENT_BINARY_DIR}/lit.site.cfg)
>>> > +
>>> > +# Run regression and unit tests
>>> > +add_lit_testsuite(check-polly-tests "Running polly regression tests"
>>> > + ${CMAKE_CURRENT_BINARY_DIR}
>>> > + PARAMS polly_site_config=${CMAKE_CURRENT_BINARY_DIR}/lit.site.cfg
>>> > + polly_unit_site_config=${CMAKE_CURRENT_BINARY_DIR}/Unit/lit.
>>> site.cfg
>>> > + DEPENDS ${POLLY_TEST_DEPS}
>>> > + )
>>> > +set_target_properties(check-polly-tests PROPERTIES FOLDER "Polly")
>>> > +add_dependencies(check-polly check-polly-tests)
>>> >
>>> > +if (POLLY_GTEST_AVAIL)
>>> > configure_lit_site_cfg(
>>> > - ${CMAKE_CURRENT_SOURCE_DIR}/lit.site.cfg.in
>>> > - ${CMAKE_CURRENT_BINARY_DIR}/lit.site.cfg)
>>> > -
>>> > - # Run regression and unit tests
>>> > - add_lit_testsuite(check-polly-tests "Running polly regression
>>> tests"
>>> > - ${CMAKE_CURRENT_BINARY_DIR}
>>> > - PARAMS polly_site_config=${CMAKE_CURRENT_BINARY_DIR}/lit.site.cfg
>>> > - polly_unit_site_config=${CMAK
>>> E_CURRENT_BINARY_DIR}/Unit/lit.site.cfg
>>> > - DEPENDS ${POLLY_TEST_DEPS}
>>> > + ${CMAKE_CURRENT_SOURCE_DIR}/Unit/lit.site.cfg.in
>>> > + ${CMAKE_CURRENT_BINARY_DIR}/Unit/lit.site.cfg
>>> > )
>>> > - set_target_properties(check-polly-tests PROPERTIES FOLDER "Polly")
>>> > - add_dependencies(check-polly check-polly-tests)
>>> >
>>> > - if (POLLY_GTEST_AVAIL)
>>> > - configure_lit_site_cfg(
>>> > - ${CMAKE_CURRENT_SOURCE_DIR}/Unit/lit.site.cfg.in
>>> > - ${CMAKE_CURRENT_BINARY_DIR}/Unit/lit.site.cfg
>>> > + # Run only unit tests
>>> > + add_lit_testsuite(check-polly-unittests "Running polly unit tests
>>> only"
>>> > + ${CMAKE_CURRENT_BINARY_DIR}/Unit
>>> > + PARAMS polly_site_config=${CMAKE_CURR
>>> ENT_BINARY_DIR}/Unit/lit.site.cfg
>>> > + DEPENDS PollyUnitTests
>>> > )
>>> > + set_target_properties(check-polly-unittests PROPERTIES FOLDER
>>> "Polly")
>>> > +endif ()
>>> > +
>>> > +configure_file(
>>> > + ${CMAKE_CURRENT_SOURCE_DIR}/UnitIsl/lit.site.cfg.in
>>> > + ${CMAKE_CURRENT_BINARY_DIR}/UnitIsl/lit.site.cfg)
>>> >
>>> > - # Run only unit tests
>>> > - add_lit_testsuite(check-polly-unittests "Running polly unit
>>> tests only"
>>> > - ${CMAKE_CURRENT_BINARY_DIR}/Unit
>>> > - PARAMS polly_site_config=${CMAKE_CURR
>>> ENT_BINARY_DIR}/Unit/lit.site.cfg
>>> > - DEPENDS PollyUnitTests
>>> > - )
>>> > - set_target_properties(check-polly-unittests PROPERTIES FOLDER
>>> "Polly")
>>> > - endif ()
>>> > -
>>> > - configure_file(
>>> > - ${CMAKE_CURRENT_SOURCE_DIR}/UnitIsl/lit.site.cfg.in
>>> > - ${CMAKE_CURRENT_BINARY_DIR}/UnitIsl/lit.site.cfg)
>>> > -
>>> > - if (POLLY_BUNDLED_ISL)
>>> > - add_lit_testsuite(check-polly-isl "Running isl unit tests only"
>>> > - ${CMAKE_CURRENT_BINARY_DIR}/UnitIsl
>>> > - PARAMS polly_site_config=${CMAKE_CURRENT_BINARY_DIR}/UnitIsl/
>>> lit.site.cfg
>>> > - DEPENDS polly-isl-test
>>> > - )
>>> > - set_target_properties(check-polly-isl PROPERTIES FOLDER "Polly")
>>> > - endif (POLLY_BUNDLED_ISL)
>>> > -
>>> > - # Run polly-check-format as part of polly-check only if we are
>>> compiling with
>>> > - # clang, so clang-format is available.
>>> > - # if (TARGET clang-format) would be preferable, but this target is
>>> only added
>>> > - # after Polly, i.e. there is no such target yet at this point. The
>>> CMake cache
>>> > - # entry LLVM_TOOL_CLANG_BUILD will only be defined after clang has
>>> been
>>> > - # configured at least once, i.e. format will be checked only after
>>> a rerun of
>>> > - # CMake's configure.
>>> > - if (LLVM_TOOL_CLANG_BUILD)
>>> > - add_dependencies(check-polly polly-check-format)
>>> > - endif ()
>>> > +if (POLLY_BUNDLED_ISL)
>>> > + add_lit_testsuite(check-polly-isl "Running isl unit tests only"
>>> > + ${CMAKE_CURRENT_BINARY_DIR}/UnitIsl
>>> > + PARAMS polly_site_config=${CMAKE_CURRENT_BINARY_DIR}/UnitIsl/
>>> lit.site.cfg
>>> > + DEPENDS polly-isl-test
>>> > + )
>>> > + set_target_properties(check-polly-isl PROPERTIES FOLDER "Polly")
>>> > +endif (POLLY_BUNDLED_ISL)
>>> >
>>> > -endif (NOT DEFINED LLVM_MAIN_SRC_DIR)
>>> > +# Run polly-check-format as part of polly-check only if we are
>>> compiling with
>>> > +# clang, so clang-format is available.
>>> > +# if (TARGET clang-format) would be preferable, but this target is
>>> only added
>>> > +# after Polly, i.e. there is no such target yet at this point. The
>>> CMake cache
>>> > +# entry LLVM_TOOL_CLANG_BUILD will only be defined after clang has
>>> been
>>> > +# configured at least once, i.e. format will be checked only after a
>>> rerun of
>>> > +# CMake's configure.
>>> > +if (LLVM_TOOL_CLANG_BUILD)
>>> > + add_dependencies(check-polly polly-check-format)
>>> > +endif ()
>>> >
>>> > configure_file(
>>> > ${CMAKE_CURRENT_SOURCE_DIR}/update_check.py
>>> > ${CMAKE_CURRENT_BINARY_DIR}/update_check.py)
>>> > -file(COPY ${CMAKE_CURRENT_BINARY_DIR}/update_check.py
>>> > - DESTINATION ${LLVM_TOOLS_DIR}
>>> > - FILE_PERMISSIONS OWNER_READ OWNER_WRITE OWNER_EXECUTE GROUP_READ
>>> > - GROUP_EXECUTE WORLD_READ WORLD_EXECUTE)
>>> >
>>> > # Add a legacy target spelling: polly-test
>>> > add_custom_target(polly-test)
>>> >
>>> > Modified: polly/trunk/test/lit.cfg
>>> > URL: http://llvm.org/viewvc/llvm-project/polly/trunk/test/lit.cfg
>>> ?rev=307650&r1=307649&r2=307650&view=diff
>>> > ============================================================
>>> ==================
>>> > --- polly/trunk/test/lit.cfg (original)
>>> > +++ polly/trunk/test/lit.cfg Tue Jul 11 04:24:25 2017
>>> > @@ -39,7 +39,9 @@ if polly_obj_root is not None:
>>> > llvm_tools_dir = getattr(config, 'llvm_tools_dir', None)
>>> > if not llvm_tools_dir:
>>> > lit_config.fatal('No LLVM tools dir set!')
>>> > - path = os.path.pathsep.join((llvm_tools_dir,
>>> config.environment['PATH']))
>>> > + extra_paths = getattr(config, 'extra_paths', [])
>>> > + base_paths = [llvm_tools_dir, config.environment['PATH']]
>>> > + path = os.path.pathsep.join(base_paths + extra_paths)
>>> > config.environment['PATH'] = path
>>> >
>>> > llvm_libs_dir = getattr(config, 'llvm_libs_dir', None)
>>> >
>>> > Modified: polly/trunk/test/lit.site.cfg.in
>>> > URL: http://llvm.org/viewvc/llvm-project/polly/trunk/test/lit.sit
>>> e.cfg.in?rev=307650&r1=307649&r2=307650&view=diff
>>> > ============================================================
>>> ==================
>>> > --- polly/trunk/test/lit.site.cfg.in (original)
>>> > +++ polly/trunk/test/lit.site.cfg.in Tue Jul 11 04:24:25 2017
>>> > @@ -10,6 +10,7 @@ config.target_triple = "@TARGET_TRIPLE@"
>>> > config.enable_gpgpu_codegen = "@GPU_CODEGEN@"
>>> > config.link_polly_into_tools = "@LINK_POLLY_INTO_TOOLS@"
>>> > config.targets_to_build = "@TARGETS_TO_BUILD@"
>>> > +config.extra_paths = "@POLLY_TEST_EXTRA_PATHS@".split(";")
>>> >
>>> > ## Check the current platform with regex
>>> > import re
>>> >
>>> >
>>> > _______________________________________________
>>> > llvm-commits mailing list
>>> > llvm-commits at lists.llvm.org
>>> > http://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-commits
>>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.llvm.org/pipermail/llvm-commits/attachments/20170719/b522fa10/attachment.html>
More information about the llvm-commits
mailing list