[llvm] r306081 - [LoopSimplify] Factor the logic to form dedicated exits into a utility.

Chandler Carruth via llvm-commits llvm-commits at lists.llvm.org
Thu Jun 22 21:03:05 PDT 2017


Author: chandlerc
Date: Thu Jun 22 23:03:04 2017
New Revision: 306081

URL: http://llvm.org/viewvc/llvm-project?rev=306081&view=rev
Log:
[LoopSimplify] Factor the logic to form dedicated exits into a utility.

I want to use the same logic as LoopSimplify to form dedicated exits in
another pass (SimpleLoopUnswitch) so I wanted to factor it out here.

I also noticed that there is a pretty significantly more efficient way
to implement this than the way the code in LoopSimplify worked. We don't
need to actually retain the set of unique exit blocks, we can just
rewrite them as we find them and use only a set to deduplicate.

This did require changing one part of LoopSimplify to not re-use the
unique set of exits, but it only used it to check that there was
a single unique exit. That part of the code is about to walk the exiting
blocks anyways, so it seemed better to rewrite it to use those exiting
blocks to compute this property on-demand.

I also had to ditch a statistic, but it doesn't seem terribly valuable.

Differential Revision: https://reviews.llvm.org/D34049

Modified:
    llvm/trunk/include/llvm/Transforms/Utils/LoopUtils.h
    llvm/trunk/lib/Transforms/Utils/LoopSimplify.cpp
    llvm/trunk/lib/Transforms/Utils/LoopUtils.cpp
    llvm/trunk/test/Transforms/LoopUnswitch/2011-11-18-SimpleSwitch.ll
    llvm/trunk/test/Transforms/LoopUnswitch/2011-11-18-TwoSwitches-Threshold.ll
    llvm/trunk/test/Transforms/LoopUnswitch/2011-11-18-TwoSwitches.ll

Modified: llvm/trunk/include/llvm/Transforms/Utils/LoopUtils.h
URL: http://llvm.org/viewvc/llvm-project/llvm/trunk/include/llvm/Transforms/Utils/LoopUtils.h?rev=306081&r1=306080&r2=306081&view=diff
==============================================================================
--- llvm/trunk/include/llvm/Transforms/Utils/LoopUtils.h (original)
+++ llvm/trunk/include/llvm/Transforms/Utils/LoopUtils.h Thu Jun 22 23:03:04 2017
@@ -362,6 +362,14 @@ private:
 BasicBlock *InsertPreheaderForLoop(Loop *L, DominatorTree *DT, LoopInfo *LI,
                                    bool PreserveLCSSA);
 
+/// Ensure that all exit blocks of the loop are dedicated exits.
+///
+/// For any loop exit block with non-loop predecessors, we split the loop
+/// predecessors to use a dedicated loop exit block. We update the dominator
+/// tree and loop info if provided, and will preserve LCSSA if requested.
+bool formDedicatedExitBlocks(Loop *L, DominatorTree *DT, LoopInfo *LI,
+                             bool PreserveLCSSA);
+
 /// Ensures LCSSA form for every instruction from the Worklist in the scope of
 /// innermost containing loop.
 ///

Modified: llvm/trunk/lib/Transforms/Utils/LoopSimplify.cpp
URL: http://llvm.org/viewvc/llvm-project/llvm/trunk/lib/Transforms/Utils/LoopSimplify.cpp?rev=306081&r1=306080&r2=306081&view=diff
==============================================================================
--- llvm/trunk/lib/Transforms/Utils/LoopSimplify.cpp (original)
+++ llvm/trunk/lib/Transforms/Utils/LoopSimplify.cpp Thu Jun 22 23:03:04 2017
@@ -72,7 +72,6 @@ using namespace llvm;
 
 #define DEBUG_TYPE "loop-simplify"
 
-STATISTIC(NumInserted, "Number of pre-header or exit blocks inserted");
 STATISTIC(NumNested  , "Number of nested loops split out");
 
 // If the block isn't already, move the new block to right after some 'outside
@@ -152,37 +151,6 @@ BasicBlock *llvm::InsertPreheaderForLoop
   return PreheaderBB;
 }
 
-/// \brief Ensure that the loop preheader dominates all exit blocks.
-///
-/// This method is used to split exit blocks that have predecessors outside of
-/// the loop.
-static BasicBlock *rewriteLoopExitBlock(Loop *L, BasicBlock *Exit,
-                                        DominatorTree *DT, LoopInfo *LI,
-                                        bool PreserveLCSSA) {
-  SmallVector<BasicBlock*, 8> LoopBlocks;
-  for (pred_iterator I = pred_begin(Exit), E = pred_end(Exit); I != E; ++I) {
-    BasicBlock *P = *I;
-    if (L->contains(P)) {
-      // Don't do this if the loop is exited via an indirect branch.
-      if (isa<IndirectBrInst>(P->getTerminator())) return nullptr;
-
-      LoopBlocks.push_back(P);
-    }
-  }
-
-  assert(!LoopBlocks.empty() && "No edges coming in from outside the loop?");
-  BasicBlock *NewExitBB = nullptr;
-
-  NewExitBB = SplitBlockPredecessors(Exit, LoopBlocks, ".loopexit", DT, LI,
-                                     PreserveLCSSA);
-  if (!NewExitBB)
-    return nullptr;
-
-  DEBUG(dbgs() << "LoopSimplify: Creating dedicated exit block "
-               << NewExitBB->getName() << "\n");
-  return NewExitBB;
-}
-
 /// Add the specified block, and all of its predecessors, to the specified set,
 /// if it's not already in there.  Stop predecessor traversal when we reach
 /// StopBlock.
@@ -346,16 +314,7 @@ static Loop *separateNestedLoop(Loop *L,
 
   // Split edges to exit blocks from the inner loop, if they emerged in the
   // process of separating the outer one.
-  SmallVector<BasicBlock *, 8> ExitBlocks;
-  L->getExitBlocks(ExitBlocks);
-  SmallSetVector<BasicBlock *, 8> ExitBlockSet(ExitBlocks.begin(),
-                                               ExitBlocks.end());
-  for (BasicBlock *ExitBlock : ExitBlockSet) {
-    if (any_of(predecessors(ExitBlock),
-               [L](BasicBlock *BB) { return !L->contains(BB); })) {
-      rewriteLoopExitBlock(L, ExitBlock, DT, LI, PreserveLCSSA);
-    }
-  }
+  formDedicatedExitBlocks(L, DT, LI, PreserveLCSSA);
 
   if (PreserveLCSSA) {
     // Fix LCSSA form for L. Some values, which previously were only used inside
@@ -563,29 +522,16 @@ ReprocessLoop:
   BasicBlock *Preheader = L->getLoopPreheader();
   if (!Preheader) {
     Preheader = InsertPreheaderForLoop(L, DT, LI, PreserveLCSSA);
-    if (Preheader) {
-      ++NumInserted;
+    if (Preheader)
       Changed = true;
-    }
   }
 
   // Next, check to make sure that all exit nodes of the loop only have
   // predecessors that are inside of the loop.  This check guarantees that the
   // loop preheader/header will dominate the exit blocks.  If the exit block has
   // predecessors from outside of the loop, split the edge now.
-  SmallVector<BasicBlock*, 8> ExitBlocks;
-  L->getExitBlocks(ExitBlocks);
-
-  SmallSetVector<BasicBlock *, 8> ExitBlockSet(ExitBlocks.begin(),
-                                               ExitBlocks.end());
-  for (BasicBlock *ExitBlock : ExitBlockSet) {
-    if (any_of(predecessors(ExitBlock),
-               [L](BasicBlock *BB) { return !L->contains(BB); })) {
-      rewriteLoopExitBlock(L, ExitBlock, DT, LI, PreserveLCSSA);
-      ++NumInserted;
-      Changed = true;
-    }
-  }
+  if (formDedicatedExitBlocks(L, DT, LI, PreserveLCSSA))
+    Changed = true;
 
   // If the header has more than two predecessors at this point (from the
   // preheader and from multiple backedges), we must adjust the loop.
@@ -614,10 +560,8 @@ ReprocessLoop:
     // insert a new block that all backedges target, then make it jump to the
     // loop header.
     LoopLatch = insertUniqueBackedgeBlock(L, Preheader, DT, LI);
-    if (LoopLatch) {
-      ++NumInserted;
+    if (LoopLatch)
       Changed = true;
-    }
   }
 
   const DataLayout &DL = L->getHeader()->getModule()->getDataLayout();
@@ -645,7 +589,22 @@ ReprocessLoop:
   // loop-invariant instructions out of the way to open up more
   // opportunities, and the disadvantage of having the responsibility
   // to preserve dominator information.
-  if (ExitBlockSet.size() == 1) {
+  auto HasUniqueExitBlock = [&]() {
+    BasicBlock *UniqueExit = nullptr;
+    for (auto *ExitingBB : ExitingBlocks)
+      for (auto *SuccBB : successors(ExitingBB)) {
+        if (L->contains(SuccBB))
+          continue;
+
+        if (!UniqueExit)
+          UniqueExit = SuccBB;
+        else if (UniqueExit != SuccBB)
+          return false;
+      }
+
+    return true;
+  };
+  if (HasUniqueExitBlock()) {
     for (unsigned i = 0, e = ExitingBlocks.size(); i != e; ++i) {
       BasicBlock *ExitingBlock = ExitingBlocks[i];
       if (!ExitingBlock->getSinglePredecessor()) continue;

Modified: llvm/trunk/lib/Transforms/Utils/LoopUtils.cpp
URL: http://llvm.org/viewvc/llvm-project/llvm/trunk/lib/Transforms/Utils/LoopUtils.cpp?rev=306081&r1=306080&r2=306081&view=diff
==============================================================================
--- llvm/trunk/lib/Transforms/Utils/LoopUtils.cpp (original)
+++ llvm/trunk/lib/Transforms/Utils/LoopUtils.cpp Thu Jun 22 23:03:04 2017
@@ -29,6 +29,7 @@
 #include "llvm/IR/ValueHandle.h"
 #include "llvm/Pass.h"
 #include "llvm/Support/Debug.h"
+#include "llvm/Transforms/Utils/BasicBlockUtils.h"
 
 using namespace llvm;
 using namespace llvm::PatternMatch;
@@ -923,6 +924,67 @@ bool InductionDescriptor::isInductionPHI
   return true;
 }
 
+bool llvm::formDedicatedExitBlocks(Loop *L, DominatorTree *DT, LoopInfo *LI,
+                                   bool PreserveLCSSA) {
+  bool Changed = false;
+
+  // We re-use a vector for the in-loop predecesosrs.
+  SmallVector<BasicBlock *, 4> InLoopPredecessors;
+
+  auto RewriteExit = [&](BasicBlock *BB) {
+    // See if there are any non-loop predecessors of this exit block and
+    // keep track of the in-loop predecessors.
+    bool IsDedicatedExit = true;
+    for (auto *PredBB : predecessors(BB))
+      if (L->contains(PredBB)) {
+        if (isa<IndirectBrInst>(PredBB->getTerminator()))
+          // We cannot rewrite exiting edges from an indirectbr.
+          return false;
+
+        InLoopPredecessors.push_back(PredBB);
+      } else {
+        IsDedicatedExit = false;
+      }
+
+    // Nothing to do if this is already a dedicated exit.
+    if (IsDedicatedExit) {
+      InLoopPredecessors.clear();
+      return false;
+    }
+
+    assert(!InLoopPredecessors.empty() && "Must have *some* loop predecessor!");
+    auto *NewExitBB = SplitBlockPredecessors(
+        BB, InLoopPredecessors, ".loopexit", DT, LI, PreserveLCSSA);
+
+    if (!NewExitBB)
+      DEBUG(dbgs() << "WARNING: Can't create a dedicated exit block for loop: "
+                   << *L << "\n");
+    else
+      DEBUG(dbgs() << "LoopSimplify: Creating dedicated exit block "
+                   << NewExitBB->getName() << "\n");
+    InLoopPredecessors.clear();
+    return true;
+  };
+
+  // Walk the exit blocks directly rather than building up a data structure for
+  // them, but only visit each one once.
+  SmallPtrSet<BasicBlock *, 4> Visited;
+  for (auto *BB : L->blocks())
+    for (auto *SuccBB : successors(BB)) {
+      // We're looking for exit blocks so skip in-loop successors.
+      if (L->contains(SuccBB))
+        continue;
+
+      // Visit each exit block exactly once.
+      if (!Visited.insert(SuccBB).second)
+        continue;
+
+      Changed |= RewriteExit(SuccBB);
+    }
+
+  return Changed;
+}
+
 /// \brief Returns the instructions that use values defined in the loop.
 SmallVector<Instruction *, 8> llvm::findDefsUsedOutsideOfLoop(Loop *L) {
   SmallVector<Instruction *, 8> UsedOutside;

Modified: llvm/trunk/test/Transforms/LoopUnswitch/2011-11-18-SimpleSwitch.ll
URL: http://llvm.org/viewvc/llvm-project/llvm/trunk/test/Transforms/LoopUnswitch/2011-11-18-SimpleSwitch.ll?rev=306081&r1=306080&r2=306081&view=diff
==============================================================================
--- llvm/trunk/test/Transforms/LoopUnswitch/2011-11-18-SimpleSwitch.ll (original)
+++ llvm/trunk/test/Transforms/LoopUnswitch/2011-11-18-SimpleSwitch.ll Thu Jun 22 23:03:04 2017
@@ -2,7 +2,6 @@
 ; RUN: opt -loop-unswitch -disable-output -stats -info-output-file - < %s | FileCheck --check-prefix=STATS %s
 ; RUN: opt -S -loop-unswitch -verify-loop-info -verify-dom-info < %s | FileCheck %s
 
-; STATS: 1 loop-simplify - Number of pre-header or exit blocks inserted
 ; STATS: 2 loop-unswitch - Number of switches unswitched
 
 ; CHECK:      %1 = icmp eq i32 %c, 1

Modified: llvm/trunk/test/Transforms/LoopUnswitch/2011-11-18-TwoSwitches-Threshold.ll
URL: http://llvm.org/viewvc/llvm-project/llvm/trunk/test/Transforms/LoopUnswitch/2011-11-18-TwoSwitches-Threshold.ll?rev=306081&r1=306080&r2=306081&view=diff
==============================================================================
--- llvm/trunk/test/Transforms/LoopUnswitch/2011-11-18-TwoSwitches-Threshold.ll (original)
+++ llvm/trunk/test/Transforms/LoopUnswitch/2011-11-18-TwoSwitches-Threshold.ll Thu Jun 22 23:03:04 2017
@@ -2,7 +2,6 @@
 ; RUN: opt -loop-unswitch -loop-unswitch-threshold 13 -disable-output -stats -info-output-file - < %s | FileCheck --check-prefix=STATS %s
 ; RUN: opt -S -loop-unswitch -loop-unswitch-threshold 13 -verify-loop-info -verify-dom-info < %s | FileCheck %s
 
-; STATS: 1 loop-simplify - Number of pre-header or exit blocks inserted
 ; STATS: 1 loop-unswitch - Number of switches unswitched
 
 ; ModuleID = '../llvm/test/Transforms/LoopUnswitch/2011-11-18-TwoSwitches.ll'

Modified: llvm/trunk/test/Transforms/LoopUnswitch/2011-11-18-TwoSwitches.ll
URL: http://llvm.org/viewvc/llvm-project/llvm/trunk/test/Transforms/LoopUnswitch/2011-11-18-TwoSwitches.ll?rev=306081&r1=306080&r2=306081&view=diff
==============================================================================
--- llvm/trunk/test/Transforms/LoopUnswitch/2011-11-18-TwoSwitches.ll (original)
+++ llvm/trunk/test/Transforms/LoopUnswitch/2011-11-18-TwoSwitches.ll Thu Jun 22 23:03:04 2017
@@ -2,7 +2,6 @@
 ; RUN: opt -loop-unswitch -loop-unswitch-threshold 1000 -disable-output -stats -info-output-file - < %s | FileCheck --check-prefix=STATS %s
 ; RUN: opt -S -loop-unswitch -loop-unswitch-threshold 1000 -verify-loop-info -verify-dom-info < %s | FileCheck %s
 
-; STATS: 1 loop-simplify - Number of pre-header or exit blocks inserted
 ; STATS: 3 loop-unswitch - Number of switches unswitched
 
 ; CHECK:        %1 = icmp eq i32 %c, 1




More information about the llvm-commits mailing list