[compiler-rt] r298977 - [XRay][compiler-rt] Add an end-to-end test for FDR Logging
Evgenii Stepanov via llvm-commits
llvm-commits at lists.llvm.org
Tue Apr 18 15:30:09 PDT 2017
I did not do anything special, just built llvm with in-tree
compiler-rt with CMAKE_BUILD_TYPE=Release and run check-xray. I don't
understand how it may not reproduce - the stack is guaranteed to be
aligned by 16, which means after the xray exit trampoline it is
guaranteed to be aligned by 16 + 8 which will cause movaps to crash.
To see the cfi problem just print the stack in gdb at the time of the crash.
On Tue, Apr 18, 2017 at 3:22 PM, Dean Michael Berris <dberris at google.com> wrote:
> Thanks Evgenii -- can you provide reproduction steps (do you enable CFI
> checking in the build?) so that I can try and debug this myself too?
>
> On Wed, Apr 19, 2017 at 7:05 AM Evgenii Stepanov <eugeni.stepanov at gmail.com>
> wrote:
>>
>> And __xray_FunctionEntry has the same alignment problem, too. Also,
>> SAVE_REGISTERS reserves extra 16 bytes of stack at the bottom that
>> seem to be left unused for some reason.
>>
>> On Tue, Apr 18, 2017 at 1:19 PM, Evgenii Stepanov
>> <eugeni.stepanov at gmail.com> wrote:
>> > .cfi_def_cfa_offset 16
>> > subq $56, %rsp
>> > .cfi_def_cfa_offset 32
>> >
>> > This is also wrong. CFA offset should change by the same amount as
>> > %rsp, i.e. 72 instead of 32. This fixes stack unwinding for me.
>> >
>> > On Tue, Apr 18, 2017 at 12:01 PM, Evgenii Stepanov
>> > <eugeni.stepanov at gmail.com> wrote:
>> >> Hi,
>> >>
>> >> this test is reliably failing on the bots and on my desktop (x86_64).
>> >>
>> >> __xray_FunctionExit:
>> >> .cfi_startproc
>> >> pushq %rbp
>> >> .cfi_def_cfa_offset 16
>> >> subq $56, %rsp
>> >> .cfi_def_cfa_offset 32
>> >> movupd %xmm0, 40(%rsp)
>> >> movupd %xmm1, 24(%rsp)
>> >> movq %rax, 16(%rsp)
>> >> movq %rdx, 8(%rsp)
>> >> movq _ZN6__xray19XRayPatchedFunctionE(%rip), %rax
>> >> testq %rax,%rax
>> >> je .Ltmp2
>> >>
>> >> movl %r10d, %edi
>> >> movl $1, %esi
>> >> callq *%rax
>> >>
>> >> This moves the stack pointer by 8 (pushq %rbp) + 56 + 8 (call *%rax) =
>> >> 72 bytes. The callee gets an unaligned stack pointer.
>> >>
>> >> The actual crash:
>> >> 0x000000000041dae3 in readValueFromFile () at
>> >> /code/llvm/projects/compiler-rt/lib/xray/xray_x86_64.cc:43
>> >> 43 char Line[BufSize] = {};
>> >> (gdb) bt
>> >> #0 0x000000000041dae3 in readValueFromFile () at
>> >> /code/llvm/projects/compiler-rt/lib/xray/xray_x86_64.cc:43
>> >> #1 0x000000000041da7b in __xray::getTSCFrequency() () at
>> >> /code/llvm/projects/compiler-rt/lib/xray/xray_x86_64.cc:65
>> >> #2 0x0000000000421789 in __xray::__xray_fdr_internal::thresholdTicks()
>> >> ()
>> >> at
>> >> /code/llvm/projects/compiler-rt/lib/xray/xray_fdr_logging_impl.h:349
>> >> #3 0x0000000000420f65 in processFunctionHook () at
>> >> /code/llvm/projects/compiler-rt/lib/xray/xray_fdr_logging_impl.h:618
>> >> #4 fdrLoggingHandleArg0 () at
>> >> /code/llvm/projects/compiler-rt/lib/xray/xray_fdr_logging.cc:213
>> >> #5 0x000000000041de81 in __xray_FunctionExit () at
>> >> /code/llvm/projects/compiler-rt/lib/xray/xray_trampoline_x86_64.S:113
>> >> #6 0x0000000000000101 in ?? ()
>> >> #7 0x0000000000000000 in ?? ()
>> >>
>> >> Dump of assembler code for function readValueFromFile():
>> >> 0x000000000041dab0 <+0>: push %rbp
>> >> 0x000000000041dab1 <+1>: push %r15
>> >> 0x000000000041dab3 <+3>: push %r14
>> >> 0x000000000041dab5 <+5>: push %rbx
>> >> 0x000000000041dab6 <+6>: sub $0x118,%rsp
>> >> 0x000000000041dabd <+13>: mov %rsi,%r14
>> >> 0x000000000041dac0 <+16>: xor %ebx,%ebx
>> >> 0x000000000041dac2 <+18>: mov $0x80000,%esi
>> >> 0x000000000041dac7 <+23>: xor %eax,%eax
>> >> 0x000000000041dac9 <+25>: callq 0x4026b0 <open at plt>
>> >> 0x000000000041dace <+30>: mov %eax,%r15d
>> >> 0x000000000041dad1 <+33>: cmp $0xffffffff,%r15d
>> >> 0x000000000041dad5 <+37>: je 0x41dbee <readValueFromFile()+318>
>> >> 0x000000000041dadb <+43>: lea 0x10(%rsp),%rbx
>> >> 0x000000000041dae0 <+48>: xorps %xmm0,%xmm0
>> >> => 0x000000000041dae3 <+51>: movaps %xmm0,0x100(%rsp)
>> >> 0x000000000041daeb <+59>: movaps %xmm0,0xf0(%rsp)
>> >> 0x000000000041daf3 <+67>: movaps %xmm0,0xe0(%rsp)
>> >> 0x000000000041dafb <+75>: movaps %xmm0,0xd0(%rsp)
>> >>
>> >> Also, as can be seen above, there is a stack unwinding issue (frame
>> >> #6). I'm not sure what's the problem there.
>> >>
>> >>
>> >> On Tue, Mar 28, 2017 at 10:19 PM, Dean Michael Berris via llvm-commits
>> >> <llvm-commits at lists.llvm.org> wrote:
>> >>> Author: dberris
>> >>> Date: Wed Mar 29 00:19:24 2017
>> >>> New Revision: 298977
>> >>>
>> >>> URL: http://llvm.org/viewvc/llvm-project?rev=298977&view=rev
>> >>> Log:
>> >>> [XRay][compiler-rt] Add an end-to-end test for FDR Logging
>> >>>
>> >>> Summary:
>> >>> This change exercises the end-to-end functionality defined in the FDR
>> >>> logging implementation. We also prepare for being able to run traces
>> >>> generated by the FDR logging implementation from being analysed with
>> >>> the
>> >>> llvm-xray command that comes with the LLVM distribution.
>> >>>
>> >>> This also unblocks D31385, D31384, and D31345.
>> >>>
>> >>> Reviewers: kpw, pelikan
>> >>>
>> >>> Subscribers: llvm-commits, mgorny
>> >>>
>> >>> Differential Revision: https://reviews.llvm.org/D31452
>> >>>
>> >>> Added:
>> >>> compiler-rt/trunk/test/xray/TestCases/Linux/fdr-mode.cc
>> >>> Modified:
>> >>> compiler-rt/trunk/include/CMakeLists.txt
>> >>> compiler-rt/trunk/include/xray/xray_log_interface.h
>> >>> compiler-rt/trunk/lib/xray/xray_fdr_logging.cc
>> >>> compiler-rt/trunk/lib/xray/xray_fdr_logging.h
>> >>> compiler-rt/trunk/lib/xray/xray_log_interface.cc
>> >>> compiler-rt/trunk/lib/xray/xray_utils.cc
>> >>> compiler-rt/trunk/test/xray/lit.cfg
>> >>>
>> >>> Modified: compiler-rt/trunk/include/CMakeLists.txt
>> >>> URL:
>> >>> http://llvm.org/viewvc/llvm-project/compiler-rt/trunk/include/CMakeLists.txt?rev=298977&r1=298976&r2=298977&view=diff
>> >>>
>> >>> ==============================================================================
>> >>> --- compiler-rt/trunk/include/CMakeLists.txt (original)
>> >>> +++ compiler-rt/trunk/include/CMakeLists.txt Wed Mar 29 00:19:24 2017
>> >>> @@ -12,7 +12,8 @@ set(SANITIZER_HEADERS
>> >>> sanitizer/tsan_interface_atomic.h)
>> >>>
>> >>> set(XRAY_HEADERS
>> >>> - xray/xray_interface.h)
>> >>> + xray/xray_interface.h
>> >>> + xray/xray_log_interface.h)
>> >>>
>> >>> set(COMPILER_RT_HEADERS
>> >>> ${SANITIZER_HEADERS}
>> >>>
>> >>> Modified: compiler-rt/trunk/include/xray/xray_log_interface.h
>> >>> URL:
>> >>> http://llvm.org/viewvc/llvm-project/compiler-rt/trunk/include/xray/xray_log_interface.h?rev=298977&r1=298976&r2=298977&view=diff
>> >>>
>> >>> ==============================================================================
>> >>> --- compiler-rt/trunk/include/xray/xray_log_interface.h (original)
>> >>> +++ compiler-rt/trunk/include/xray/xray_log_interface.h Wed Mar 29
>> >>> 00:19:24 2017
>> >>> @@ -48,4 +48,13 @@ XRayLogFlushStatus __xray_log_flushLog()
>> >>>
>> >>> } // extern "C"
>> >>>
>> >>> +namespace __xray {
>> >>> +// Options used by the LLVM XRay FDR implementation.
>> >>> +struct FDRLoggingOptions {
>> >>> + bool ReportErrors = false;
>> >>> + int Fd = -1;
>> >>> +};
>> >>> +
>> >>> +} // namespace __xray
>> >>> +
>> >>> #endif // XRAY_XRAY_LOG_INTERFACE_H
>> >>>
>> >>> Modified: compiler-rt/trunk/lib/xray/xray_fdr_logging.cc
>> >>> URL:
>> >>> http://llvm.org/viewvc/llvm-project/compiler-rt/trunk/lib/xray/xray_fdr_logging.cc?rev=298977&r1=298976&r2=298977&view=diff
>> >>>
>> >>> ==============================================================================
>> >>> --- compiler-rt/trunk/lib/xray/xray_fdr_logging.cc (original)
>> >>> +++ compiler-rt/trunk/lib/xray/xray_fdr_logging.cc Wed Mar 29 00:19:24
>> >>> 2017
>> >>> @@ -51,19 +51,18 @@ std::unique_ptr<FDRLoggingOptions> FDROp
>> >>> XRayLogInitStatus fdrLoggingInit(std::size_t BufferSize, std::size_t
>> >>> BufferMax,
>> >>> void *Options,
>> >>> size_t OptionsSize)
>> >>> XRAY_NEVER_INSTRUMENT {
>> >>> - assert(OptionsSize == sizeof(FDRLoggingOptions));
>> >>> + if (OptionsSize != sizeof(FDRLoggingOptions))
>> >>> + return static_cast<XRayLogInitStatus>(__sanitizer::atomic_load(
>> >>> + &LoggingStatus, __sanitizer::memory_order_acquire));
>> >>> s32 CurrentStatus = XRayLogInitStatus::XRAY_LOG_UNINITIALIZED;
>> >>> - if (__sanitizer::atomic_compare_exchange_strong(
>> >>> + if (!__sanitizer::atomic_compare_exchange_strong(
>> >>> &LoggingStatus, &CurrentStatus,
>> >>> XRayLogInitStatus::XRAY_LOG_INITIALIZING,
>> >>> __sanitizer::memory_order_release))
>> >>> return static_cast<XRayLogInitStatus>(CurrentStatus);
>> >>>
>> >>> FDROptions.reset(new FDRLoggingOptions());
>> >>> - *FDROptions = *reinterpret_cast<FDRLoggingOptions *>(Options);
>> >>> - if (FDROptions->ReportErrors)
>> >>> - SetPrintfAndReportCallback(printToStdErr);
>> >>> -
>> >>> + memcpy(FDROptions.get(), Options, OptionsSize);
>> >>> bool Success = false;
>> >>> BQ = std::make_shared<BufferQueue>(BufferSize, BufferMax, Success);
>> >>> if (!Success) {
>> >>> @@ -77,6 +76,7 @@ XRayLogInitStatus fdrLoggingInit(std::si
>> >>> __sanitizer::atomic_store(&LoggingStatus,
>> >>> XRayLogInitStatus::XRAY_LOG_INITIALIZED,
>> >>> __sanitizer::memory_order_release);
>> >>> + Report("XRay FDR init successful.\n");
>> >>> return XRayLogInitStatus::XRAY_LOG_INITIALIZED;
>> >>> }
>> >>>
>> >>> @@ -88,7 +88,7 @@ XRayLogFlushStatus fdrLoggingFlush() XRA
>> >>> return XRayLogFlushStatus::XRAY_LOG_NOT_FLUSHING;
>> >>>
>> >>> s32 Result = XRayLogFlushStatus::XRAY_LOG_NOT_FLUSHING;
>> >>> - if (__sanitizer::atomic_compare_exchange_strong(
>> >>> + if (!__sanitizer::atomic_compare_exchange_strong(
>> >>> &LogFlushStatus, &Result,
>> >>> XRayLogFlushStatus::XRAY_LOG_FLUSHING,
>> >>> __sanitizer::memory_order_release))
>> >>> return static_cast<XRayLogFlushStatus>(Result);
>> >>> @@ -140,7 +140,7 @@ XRayLogFlushStatus fdrLoggingFlush() XRA
>> >>>
>> >>> XRayLogInitStatus fdrLoggingFinalize() XRAY_NEVER_INSTRUMENT {
>> >>> s32 CurrentStatus = XRayLogInitStatus::XRAY_LOG_INITIALIZED;
>> >>> - if (__sanitizer::atomic_compare_exchange_strong(
>> >>> + if (!__sanitizer::atomic_compare_exchange_strong(
>> >>> &LoggingStatus, &CurrentStatus,
>> >>> XRayLogInitStatus::XRAY_LOG_FINALIZING,
>> >>> __sanitizer::memory_order_release))
>> >>> @@ -168,8 +168,7 @@ XRayLogInitStatus fdrLoggingReset() XRAY
>> >>> BQ.reset();
>> >>>
>> >>> // Spin until the flushing status is flushed.
>> >>> - s32 CurrentFlushingStatus =
>> >>> - XRayLogFlushStatus::XRAY_LOG_FLUSHED;
>> >>> + s32 CurrentFlushingStatus = XRayLogFlushStatus::XRAY_LOG_FLUSHED;
>> >>> while (__sanitizer::atomic_compare_exchange_weak(
>> >>> &LogFlushStatus, &CurrentFlushingStatus,
>> >>> XRayLogFlushStatus::XRAY_LOG_NOT_FLUSHING,
>> >>>
>> >>> Modified: compiler-rt/trunk/lib/xray/xray_fdr_logging.h
>> >>> URL:
>> >>> http://llvm.org/viewvc/llvm-project/compiler-rt/trunk/lib/xray/xray_fdr_logging.h?rev=298977&r1=298976&r2=298977&view=diff
>> >>>
>> >>> ==============================================================================
>> >>> --- compiler-rt/trunk/lib/xray/xray_fdr_logging.h (original)
>> >>> +++ compiler-rt/trunk/lib/xray/xray_fdr_logging.h Wed Mar 29 00:19:24
>> >>> 2017
>> >>> @@ -26,14 +26,6 @@
>> >>> // default mode of always writing fixed-size records.
>> >>>
>> >>> namespace __xray {
>> >>> -
>> >>> -// Options used by the FDR implementation.
>> >>> -struct FDRLoggingOptions {
>> >>> - bool ReportErrors = false;
>> >>> - int Fd = -1;
>> >>> -};
>> >>> -
>> >>> -// Flight Data Recorder mode implementation interfaces.
>> >>> XRayLogInitStatus fdrLoggingInit(size_t BufferSize, size_t BufferMax,
>> >>> void *Options, size_t OptionsSize);
>> >>> XRayLogInitStatus fdrLoggingFinalize();
>> >>>
>> >>> Modified: compiler-rt/trunk/lib/xray/xray_log_interface.cc
>> >>> URL:
>> >>> http://llvm.org/viewvc/llvm-project/compiler-rt/trunk/lib/xray/xray_log_interface.cc?rev=298977&r1=298976&r2=298977&view=diff
>> >>>
>> >>> ==============================================================================
>> >>> --- compiler-rt/trunk/lib/xray/xray_log_interface.cc (original)
>> >>> +++ compiler-rt/trunk/lib/xray/xray_log_interface.cc Wed Mar 29
>> >>> 00:19:24 2017
>> >>> @@ -35,8 +35,9 @@ void __xray_set_log_impl(XRayLogImpl Imp
>> >>> *GlobalXRayImpl = Impl;
>> >>> }
>> >>>
>> >>> -XRayLogInitStatus __xray_init(size_t BufferSize, size_t MaxBuffers,
>> >>> void *Args,
>> >>> - size_t ArgsSize) XRAY_NEVER_INSTRUMENT
>> >>> {
>> >>> +XRayLogInitStatus __xray_log_init(size_t BufferSize, size_t
>> >>> MaxBuffers,
>> >>> + void *Args,
>> >>> + size_t ArgsSize)
>> >>> XRAY_NEVER_INSTRUMENT {
>> >>> __sanitizer::SpinMutexLock Guard(&XRayImplMutex);
>> >>> if (!GlobalXRayImpl)
>> >>> return XRayLogInitStatus::XRAY_LOG_UNINITIALIZED;
>> >>>
>> >>> Modified: compiler-rt/trunk/lib/xray/xray_utils.cc
>> >>> URL:
>> >>> http://llvm.org/viewvc/llvm-project/compiler-rt/trunk/lib/xray/xray_utils.cc?rev=298977&r1=298976&r2=298977&view=diff
>> >>>
>> >>> ==============================================================================
>> >>> --- compiler-rt/trunk/lib/xray/xray_utils.cc (original)
>> >>> +++ compiler-rt/trunk/lib/xray/xray_utils.cc Wed Mar 29 00:19:24 2017
>> >>> @@ -93,8 +93,6 @@ bool readValueFromFile(const char *Filen
>> >>> }
>> >>>
>> >>> int getLogFD() XRAY_NEVER_INSTRUMENT {
>> >>> - // FIXME: Figure out how to make this less stderr-dependent.
>> >>> - SetPrintfAndReportCallback(printToStdErr);
>> >>> // Open a temporary file once for the log.
>> >>> static char TmpFilename[256] = {};
>> >>> static char TmpWildcardPattern[] = "XXXXXX";
>> >>> @@ -119,8 +117,7 @@ int getLogFD() XRAY_NEVER_INSTRUMENT {
>> >>> TmpFilename);
>> >>> return -1;
>> >>> }
>> >>> - if (Verbosity())
>> >>> - fprintf(stderr, "XRay: Log file in '%s'\n", TmpFilename);
>> >>> + Report("XRay: Log file in '%s'\n", TmpFilename);
>> >>>
>> >>> return Fd;
>> >>> }
>> >>>
>> >>> Added: compiler-rt/trunk/test/xray/TestCases/Linux/fdr-mode.cc
>> >>> URL:
>> >>> http://llvm.org/viewvc/llvm-project/compiler-rt/trunk/test/xray/TestCases/Linux/fdr-mode.cc?rev=298977&view=auto
>> >>>
>> >>> ==============================================================================
>> >>> --- compiler-rt/trunk/test/xray/TestCases/Linux/fdr-mode.cc (added)
>> >>> +++ compiler-rt/trunk/test/xray/TestCases/Linux/fdr-mode.cc Wed Mar 29
>> >>> 00:19:24 2017
>> >>> @@ -0,0 +1,62 @@
>> >>> +// RUN: %clangxx_xray -std=c++11 %s -o %t
>> >>> +// RUN: XRAY_OPTIONS="patch_premain=false xray_naive_log=false
>> >>> xray_logfile_base=fdr-logging-test- xray_fdr_log=true verbosity=1" %run %t
>> >>> 2>&1 | FileCheck %s
>> >>> +// FIXME: %llvm_xray convert -instr_map=%t "`ls fdr-logging-test-* |
>> >>> head -1`" | FileCheck %s --check-prefix TRACE
>> >>> +// RUN: rm fdr-logging-test-*
>> >>> +
>> >>> +#include "xray/xray_log_interface.h"
>> >>> +#include <cassert>
>> >>> +#include <chrono>
>> >>> +#include <cstdio>
>> >>> +#include <iostream>
>> >>> +#include <stdlib.h>
>> >>> +#include <thread>
>> >>> +#include <time.h>
>> >>> +
>> >>> +constexpr auto kBufferSize = 16384;
>> >>> +constexpr auto kBufferMax = 10;
>> >>> +
>> >>> +thread_local uint64_t var = 0;
>> >>> +[[clang::xray_always_instrument]] void __attribute__((noinline)) fC()
>> >>> { ++var; }
>> >>> +
>> >>> +[[clang::xray_always_instrument]] void __attribute__((noinline)) fB()
>> >>> { fC(); }
>> >>> +
>> >>> +[[clang::xray_always_instrument]] void __attribute__((noinline)) fA()
>> >>> { fB(); }
>> >>> +
>> >>> +int main(int argc, char *argv[]) {
>> >>> + using namespace __xray;
>> >>> + FDRLoggingOptions Options;
>> >>> + std::cout << "Logging before init." << std::endl;
>> >>> + // CHECK: Logging before init.
>> >>> + auto status = __xray_log_init(kBufferSize, kBufferMax, &Options,
>> >>> + sizeof(FDRLoggingOptions));
>> >>> + assert(status == XRayLogInitStatus::XRAY_LOG_INITIALIZED);
>> >>> + std::cout << "Init status " << status << std::endl;
>> >>> + // CHECK: Init status {{.*}}
>> >>> + std::cout << "Patching..." << std::endl;
>> >>> + // CHECK: Patching...
>> >>> + __xray_patch();
>> >>> + fA();
>> >>> + fC();
>> >>> + fB();
>> >>> + fA();
>> >>> + fC();
>> >>> + std::thread other_thread([]() {
>> >>> + fC();
>> >>> + fB();
>> >>> + fA();
>> >>> + });
>> >>> + other_thread.join();
>> >>> + std::cout << "Joined" << std::endl;
>> >>> + // CHECK: Joined
>> >>> + std::cout << "Finalize status " << __xray_log_finalize() <<
>> >>> std::endl;
>> >>> + // CHECK: Finalize status {{.*}}
>> >>> + fC();
>> >>> + std::cout << "Main execution var = " << var << std::endl;
>> >>> + // CHECK: Main execution var = 6
>> >>> + std::cout << "Flush status " << __xray_log_flushLog() << std::endl;
>> >>> + // CHECK: Flush status {{.*}}
>> >>> + __xray_unpatch();
>> >>> + return 0;
>> >>> +}
>> >>> +
>> >>> +// TRACE: { function }
>> >>>
>> >>> Modified: compiler-rt/trunk/test/xray/lit.cfg
>> >>> URL:
>> >>> http://llvm.org/viewvc/llvm-project/compiler-rt/trunk/test/xray/lit.cfg?rev=298977&r1=298976&r2=298977&view=diff
>> >>>
>> >>> ==============================================================================
>> >>> --- compiler-rt/trunk/test/xray/lit.cfg (original)
>> >>> +++ compiler-rt/trunk/test/xray/lit.cfg Wed Mar 29 00:19:24 2017
>> >>> @@ -16,6 +16,9 @@ clang_xray_cxxflags = config.cxx_mode_fl
>> >>> def build_invocation(compile_flags):
>> >>> return ' ' + ' '.join([config.clang] + compile_flags) + ' '
>> >>>
>> >>> +# Assume that llvm-xray is in the config.llvm_tools_dir.
>> >>> +llvm_xray = os.path.join(config.llvm_tools_dir, 'llvm-xray')
>> >>> +
>> >>> # Setup substitutions.
>> >>> config.substitutions.append(
>> >>> ('%clang ', build_invocation([config.target_cflags])))
>> >>> @@ -26,6 +29,8 @@ config.substitutions.append(
>> >>> ('%clang_xray ', build_invocation(clang_xray_cflags)))
>> >>> config.substitutions.append(
>> >>> ('%clangxx_xray', build_invocation(clang_xray_cxxflags)))
>> >>> +config.substitutions.append(
>> >>> + ('%llvm_xray', llvm_xray))
>> >>>
>> >>> # Default test suffixes.
>> >>> config.suffixes = ['.c', '.cc', '.cpp']
>> >>>
>> >>>
>> >>> _______________________________________________
>> >>> llvm-commits mailing list
>> >>> llvm-commits at lists.llvm.org
>> >>> http://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-commits
More information about the llvm-commits
mailing list