[llvm] r241698 - Expand LangRef.html's documentation on LLVM's inline assembly.
James Y Knight
jyknight at google.com
Wed Jul 8 11:08:36 PDT 2015
Author: jyknight
Date: Wed Jul 8 13:08:36 2015
New Revision: 241698
URL: http://llvm.org/viewvc/llvm-project?rev=241698&view=rev
Log:
Expand LangRef.html's documentation on LLVM's inline assembly.
While trying to figure out how this was all supposed to work, I
figured I'd start writing down some documentation, since it was
basically completely missing.
Differential Revision: http://reviews.llvm.org/D10816
Modified:
llvm/trunk/docs/LangRef.rst
Modified: llvm/trunk/docs/LangRef.rst
URL: http://llvm.org/viewvc/llvm-project/llvm/trunk/docs/LangRef.rst?rev=241698&r1=241697&r2=241698&view=diff
==============================================================================
--- llvm/trunk/docs/LangRef.rst (original)
+++ llvm/trunk/docs/LangRef.rst Wed Jul 8 13:08:36 2015
@@ -1446,8 +1446,8 @@ The strings can contain any character by
characters. The escape sequence used is simply "\\xx" where "xx" is the
two digit hex code for the number.
-The inline asm code is simply printed to the machine code .s file when
-assembly code is generated.
+Note that the assembly string *must* be parseable by LLVM's integrated assembler
+(unless it is disabled), even when emitting a ``.s`` file.
.. _langref_datalayout:
@@ -2800,13 +2800,36 @@ Inline Assembler Expressions
----------------------------
LLVM supports inline assembler expressions (as opposed to :ref:`Module-Level
-Inline Assembly <moduleasm>`) through the use of a special value. This
-value represents the inline assembler as a string (containing the
-instructions to emit), a list of operand constraints (stored as a
-string), a flag that indicates whether or not the inline asm expression
-has side effects, and a flag indicating whether the function containing
-the asm needs to align its stack conservatively. An example inline
-assembler expression is:
+Inline Assembly <moduleasm>`) through the use of a special value. This value
+represents the inline assembler as a template string (containing the
+instructions to emit), a list of operand constraints (stored as a string), a
+flag that indicates whether or not the inline asm expression has side effects,
+and a flag indicating whether the function containing the asm needs to align its
+stack conservatively.
+
+The template string supports argument substitution of the operands using "``$``"
+followed by a number, to indicate substitution of the given register/memory
+location, as specified by the constraint string. "``${NUM:MODIFIER}``" may also
+be used, where ``MODIFIER`` is a target-specific annotation for how to print the
+operand (See :ref:`inline-asm-modifiers`).
+
+A literal "``$``" may be included by using "``$$``" in the template. To include
+other special characters into the output, the usual "``\XX``" escapes may be
+used, just as in other strings. Note that after template substitution, the
+resulting assembly string is parsed by LLVM's integrated assembler unless it is
+disabled -- even when emitting a ``.s`` file -- and thus must contain assembly
+syntax known to LLVM.
+
+LLVM's support for inline asm is modeled closely on the requirements of Clang's
+GCC-compatible inline-asm support. Thus, the feature-set and the constraint and
+modifier codes listed here are similar or identical to those in GCC's inline asm
+support. However, to be clear, the syntax of the template and constraint strings
+described here is *not* the same as the syntax accepted by GCC and Clang, and,
+while most constraint letters are passed through as-is by Clang, some get
+translated to other codes when converting from the C source to the LLVM
+assembly.
+
+An example inline assembler expression is:
.. code-block:: llvm
@@ -2852,6 +2875,593 @@ If multiple keywords appear the '``sidee
first, the '``alignstack``' keyword second and the '``inteldialect``'
keyword last.
+Inline Asm Constraint String
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The constraint list is a comma-separated string, each element containing one or
+more constraint codes.
+
+For each element in the constraint list an appropriate register or memory
+operand will be chosen, and it will be made available to assembly template
+string expansion as ``$0`` for the first constraint in the list, ``$1`` for the
+second, etc.
+
+There are three different types of constraints, which are distinguished by a
+prefix symbol in front of the constraint code: Output, Input, and Clobber. The
+constraints must always be given in that order: outputs first, then inputs, then
+clobbers. They cannot be intermingled.
+
+There are also three different categories of constraint codes:
+
+- Register constraint. This is either a register class, or a fixed physical
+ register. This kind of constraint will allocate a register, and if necessary,
+ bitcast the argument or result to the appropriate type.
+- Memory constraint. This kind of constraint is for use with an instruction
+ taking a memory operand. Different constraints allow for different addressing
+ modes used by the target.
+- Immediate value constraint. This kind of constraint is for an integer or other
+ immediate value which can be rendered directly into an instruction. The
+ various target-specific constraints allow the selection of a value in the
+ proper range for the instruction you wish to use it with.
+
+Output constraints
+""""""""""""""""""
+
+Output constraints are specified by an "``=``" prefix (e.g. "``=r``"). This
+indicates that the assembly will write to this operand, and the operand will
+then be made available as a return value of the ``asm`` expression. Output
+constraints do not consume an argument from the call instruction. (Except, see
+below about indirect outputs).
+
+Normally, it is expected that no output locations are written to by the assembly
+expression until *all* of the inputs have been read. As such, LLVM may assign
+the same register to an output and an input. If this is not safe (e.g. if the
+assembly contains two instructions, where the first writes to one output, and
+the second reads an input and writes to a second output), then the "``&``"
+modifier must be used (e.g. "``=&r``") to specify that the output is an
+"early-clobber" output. Marking an ouput as "early-clobber" ensures that LLVM
+will not use the same register for any inputs (other than an input tied to this
+output).
+
+Input constraints
+"""""""""""""""""
+
+Input constraints do not have a prefix -- just the constraint codes. Each input
+constraint will consume one argument from the call instruction. It is not
+permitted for the asm to write to any input register or memory location (unless
+that input is tied to an output). Note also that multiple inputs may all be
+assigned to the same register, if LLVM can determine that they necessarily all
+contain the same value.
+
+Instead of providing a Constraint Code, input constraints may also "tie"
+themselves to an output constraint, by providing an integer as the constraint
+string. Tied inputs still consume an argument from the call instruction, and
+take up a position in the asm template numbering as is usual -- they will simply
+be constrained to always use the same register as the output they've been tied
+to. For example, a constraint string of "``=r,0``" says to assign a register for
+output, and use that register as an input as well (it being the 0'th
+constraint).
+
+It is permitted to tie an input to an "early-clobber" output. In that case, no
+*other* input may share the same register as the input tied to the early-clobber
+(even when the other input has the same value).
+
+You may only tie an input to an output which has a register constraint, not a
+memory constraint. Only a single input may be tied to an output.
+
+There is also an "interesting" feature which deserves a bit of explanation: if a
+register class constraint allocates a register which is too small for the value
+type operand provided as input, the input value will be split into multiple
+registers, and all of them passed to the inline asm.
+
+However, this feature is often not as useful as you might think.
+
+Firstly, the registers are *not* guaranteed to be consecutive. So, on those
+architectures that have instructions which operate on multiple consecutive
+instructions, this is not an appropriate way to support them. (e.g. the 32-bit
+SparcV8 has a 64-bit load, which instruction takes a single 32-bit register. The
+hardware then loads into both the named register, and the next register. This
+feature of inline asm would not be useful to support that.)
+
+A few of the targets provide a template string modifier allowing explicit access
+to the second register of a two-register operand (e.g. MIPS ``L``, ``M``, and
+``D``). On such an architecture, you can actually access the second allocated
+register (yet, still, not any subsequent ones). But, in that case, you're still
+probably better off simply splitting the value into two separate operands, for
+clarity. (e.g. see the description of the ``A`` constraint on X86, which,
+despite existing only for use with this feature, is not really a good idea to
+use)
+
+Indirect inputs and outputs
+"""""""""""""""""""""""""""
+
+Indirect output or input constraints can be specified by the "``*``" modifier
+(which goes after the "``=``" in case of an output). This indicates that the asm
+will write to or read from the contents of an *address* provided as an input
+argument. (Note that in this way, indirect outputs act more like an *input* than
+an output: just like an input, they consume an argument of the call expression,
+rather than producing a return value. An indirect output constraint is an
+"output" only in that the asm is expected to write to the contents of the input
+memory location, instead of just read from it).
+
+This is most typically used for memory constraint, e.g. "``=*m``", to pass the
+address of a variable as a value.
+
+It is also possible to use an indirect *register* constraint, but only on output
+(e.g. "``=*r``"). This will cause LLVM to allocate a register for an output
+value normally, and then, separately emit a store to the address provided as
+input, after the provided inline asm. (It's not clear what value this
+functionality provides, compared to writing the store explicitly after the asm
+statement, and it can only produce worse code, since it bypasses many
+optimization passes. I would recommend not using it.)
+
+
+Clobber constraints
+"""""""""""""""""""
+
+A clobber constraint is indicated by a "``~``" prefix. A clobber does not
+consume an input operand, nor generate an output. Clobbers cannot use any of the
+general constraint code letters -- they may use only explicit register
+constraints, e.g. "``~{eax}``". The one exception is that a clobber string of
+"``~{memory}``" indicates that the assembly writes to arbitrary undeclared
+memory locations -- not only the memory pointed to by a declared indirect
+output.
+
+
+Constraint Codes
+""""""""""""""""
+After a potential prefix comes constraint code, or codes.
+
+A Constraint Code is either a single letter (e.g. "``r``"), a "``^``" character
+followed by two letters (e.g. "``^wc``"), or "``{``" register-name "``}``"
+(e.g. "``{eax}``").
+
+The one and two letter constraint codes are typically chosen to be the same as
+GCC's constraint codes.
+
+A single constraint may include one or more than constraint code in it, leaving
+it up to LLVM to choose which one to use. This is included mainly for
+compatibility with the translation of GCC inline asm coming from clang.
+
+There are two ways to specify alternatives, and either or both may be used in an
+inline asm constraint list:
+
+1) Append the codes to each other, making a constraint code set. E.g. "``im``"
+ or "``{eax}m``". This means "choose any of the options in the set". The
+ choice of constraint is made independently for each constraint in the
+ constraint list.
+
+2) Use "``|``" between constraint code sets, creating alternatives. Every
+ constraint in the constraint list must have the same number of alternative
+ sets. With this syntax, the same alternative in *all* of the items in the
+ constraint list will be chosen together.
+
+Putting those together, you might have a two operand constraint string like
+``"rm|r,ri|rm"``. This indicates that if operand 0 is ``r`` or ``m``, then
+operand 1 may be one of ``r`` or ``i``. If operand 0 is ``r``, then operand 1
+may be one of ``r`` or ``m``. But, operand 0 and 1 cannot both be of type m.
+
+However, the use of either of the alternatives features is *NOT* recommended, as
+LLVM is not able to make an intelligent choice about which one to use. (At the
+point it currently needs to choose, not enough information is available to do so
+in a smart way.) Thus, it simply tries to make a choice that's most likely to
+compile, not one that will be optimal performance. (e.g., given "``rm``", it'll
+always choose to use memory, not registers). And, if given multiple registers,
+or multiple register classes, it will simply choose the first one. (In fact, it
+doesn't currently even ensure explicitly specified physical registers are
+unique, so specifying multiple physical registers as alternatives, like
+``{r11}{r12},{r11}{r12}``, will assign r11 to both operands, not at all what was
+intended.)
+
+Supported Constraint Code List
+""""""""""""""""""""""""""""""
+
+The constraint codes are, in general, expected to behave the same way they do in
+GCC. LLVM's support is often implemented on an 'as-needed' basis, to support C
+inline asm code which was supported by GCC. A mismatch in behavior between LLVM
+and GCC likely indicates a bug in LLVM.
+
+Some constraint codes are typically supported by all targets:
+
+- ``r``: A register in the target's general purpose register class.
+- ``m``: A memory address operand. It is target-specific what addressing modes
+ are supported, typical examples are register, or register + register offset,
+ or register + immediate offset (of some target-specific size).
+- ``i``: An integer constant (of target-specific width). Allows either a simple
+ immediate, or a relocatable value.
+- ``n``: An integer constant -- *not* including relocatable values.
+- ``s``: An integer constant, but allowing *only* relocatable values.
+- ``X``: Allows an operand of any kind, no constraint whatsoever. Typically
+ useful to pass a label for an asm branch or call.
+
+ .. FIXME: but that surely isn't actually okay to jump out of an asm
+ block without telling llvm about the control transfer???)
+
+- ``{register-name}``: Requires exactly the named physical register.
+
+Other constraints are target-specific:
+
+AArch64:
+
+- ``z``: An immediate integer 0. Outputs ``WZR`` or ``XZR``, as appropriate.
+- ``I``: An immediate integer valid for an ``ADD`` or ``SUB`` instruction,
+ i.e. 0 to 4095 with optional shift by 12.
+- ``J``: An immediate integer that, when negated, is valid for an ``ADD`` or
+ ``SUB`` instruction, i.e. -1 to -4095 with optional left shift by 12.
+- ``K``: An immediate integer that is valid for the 'bitmask immediate 32' of a
+ logical instruction like ``AND``, ``EOR``, or ``ORR`` with a 32-bit register.
+- ``L``: An immediate integer that is valid for the 'bitmask immediate 64' of a
+ logical instruction like ``AND``, ``EOR``, or ``ORR`` with a 64-bit register.
+- ``M``: An immediate integer for use with the ``MOV`` assembly alias on a
+ 32-bit register. This is a superset of ``K``: in addition to the bitmask
+ immediate, also allows immediate integers which can be loaded with a single
+ ``MOVZ`` or ``MOVL`` instruction.
+- ``N``: An immediate integer for use with the ``MOV`` assembly alias on a
+ 64-bit register. This is a superset of ``L``.
+- ``Q``: Memory address operand must be in a single register (no
+ offsets). (However, LLVM currently does this for the ``m`` constraint as
+ well.)
+- ``r``: A 32 or 64-bit integer register (W* or X*).
+- ``w``: A 32, 64, or 128-bit floating-point/SIMD register.
+- ``x``: A lower 128-bit floating-point/SIMD register (``V0`` to ``V15``).
+
+AMDGPU:
+
+- ``r``: A 32 or 64-bit integer register.
+- ``[0-9]v``: The 32-bit VGPR register, number 0-9.
+- ``[0-9]s``: The 32-bit SGPR register, number 0-9.
+
+
+All ARM modes:
+
+- ``Q``, ``Um``, ``Un``, ``Uq``, ``Us``, ``Ut``, ``Uv``, ``Uy``: Memory address
+ operand. Treated the same as operand ``m``, at the moment.
+
+ARM and ARM's Thumb2 mode:
+
+- ``j``: An immediate integer between 0 and 65535 (valid for ``MOVW``)
+- ``I``: An immediate integer valid for a data-processing instruction.
+- ``J``: An immediate integer between -4095 and 4095.
+- ``K``: An immediate integer whose bitwise inverse is valid for a
+ data-processing instruction. (Can be used with template modifier "``B``" to
+ print the inverted value).
+- ``L``: An immediate integer whose negation is valid for a data-processing
+ instruction. (Can be used with template modifier "``n``" to print the negated
+ value).
+- ``M``: A power of two or a integer between 0 and 32.
+- ``N``: Invalid immediate constraint.
+- ``O``: Invalid immediate constraint.
+- ``r``: A general-purpose 32-bit integer register (``r0-r15``).
+- ``l``: In Thumb2 mode, low 32-bit GPR registers (``r0-r7``). In ARM mode, same
+ as ``r``.
+- ``h``: In Thumb2 mode, a high 32-bit GPR register (``r8-r15``). In ARM mode,
+ invalid.
+- ``w``: A 32, 64, or 128-bit floating-point/SIMD register: ``s0-s31``,
+ ``d0-d31``, or ``q0-q15``.
+- ``x``: A 32, 64, or 128-bit floating-point/SIMD register: ``s0-s15``,
+ ``d0-d7``, or ``q0-q3``.
+- ``t``: A floating-point/SIMD register, only supports 32-bit values:
+ ``s0-s31``.
+
+ARM's Thumb1 mode:
+
+- ``I``: An immediate integer between 0 and 255.
+- ``J``: An immediate integer between -255 and -1.
+- ``K``: An immediate integer between 0 and 255, with optional left-shift by
+ some amount.
+- ``L``: An immediate integer between -7 and 7.
+- ``M``: An immediate integer which is a multiple of 4 between 0 and 1020.
+- ``N``: An immediate integer between 0 and 31.
+- ``O``: An immediate integer which is a multiple of 4 between -508 and 508.
+- ``r``: A low 32-bit GPR register (``r0-r7``).
+- ``l``: A low 32-bit GPR register (``r0-r7``).
+- ``h``: A high GPR register (``r0-r7``).
+- ``w``: A 32, 64, or 128-bit floating-point/SIMD register: ``s0-s31``,
+ ``d0-d31``, or ``q0-q15``.
+- ``x``: A 32, 64, or 128-bit floating-point/SIMD register: ``s0-s15``,
+ ``d0-d7``, or ``q0-q3``.
+- ``t``: A floating-point/SIMD register, only supports 32-bit values:
+ ``s0-s31``.
+
+
+Hexagon:
+
+- ``o``, ``v``: A memory address operand, treated the same as constraint ``m``,
+ at the moment.
+- ``r``: A 32 or 64-bit register.
+
+MSP430:
+
+- ``r``: An 8 or 16-bit register.
+
+MIPS:
+
+- ``I``: An immediate signed 16-bit integer.
+- ``J``: An immediate integer zero.
+- ``K``: An immediate unsigned 16-bit integer.
+- ``L``: An immediate 32-bit integer, where the lower 16 bits are 0.
+- ``N``: An immediate integer between -65535 and -1.
+- ``O``: An immediate signed 15-bit integer.
+- ``P``: An immediate integer between 1 and 65535.
+- ``m``: A memory address operand. In MIPS-SE mode, allows a base address
+ register plus 16-bit immediate offset. In MIPS mode, just a base register.
+- ``R``: A memory address operand. In MIPS-SE mode, allows a base address
+ register plus a 9-bit signed offset. In MIPS mode, the same as constraint
+ ``m``.
+- ``ZC``: A memory address operand, suitable for use in a ``pref``, ``ll``, or
+ ``sc`` instruction on the given subtarget (details vary).
+- ``r``, ``d``, ``y``: A 32 or 64-bit GPR register.
+- ``f``: A 32 or 64-bit FPU register (``F0-F31``), or a 128-bit MSA register
+ (``W0-W31``).
+- ``c``: A 32-bit or 64-bit GPR register suitable for indirect jump (always
+ ``25``).
+- ``l``: The ``lo`` register, 32 or 64-bit.
+- ``x``: Invalid.
+
+NVPTX:
+
+- ``b``: A 1-bit integer register.
+- ``c`` or ``h``: A 16-bit integer register.
+- ``r``: A 32-bit integer register.
+- ``l`` or ``N``: A 64-bit integer register.
+- ``f``: A 32-bit float register.
+- ``d``: A 64-bit float register.
+
+
+PowerPC:
+
+- ``I``: An immediate signed 16-bit integer.
+- ``J``: An immediate unsigned 16-bit integer, shifted left 16 bits.
+- ``K``: An immediate unsigned 16-bit integer.
+- ``L``: An immediate signed 16-bit integer, shifted left 16 bits.
+- ``M``: An immediate integer greater than 31.
+- ``N``: An immediate integer that is an exact power of 2.
+- ``O``: The immediate integer constant 0.
+- ``P``: An immediate integer constant whose negation is a signed 16-bit
+ constant.
+- ``es``, ``o``, ``Q``, ``Z``, ``Zy``: A memory address operand, currently
+ treated the same as ``m``.
+- ``r``: A 32 or 64-bit integer register.
+- ``b``: A 32 or 64-bit integer register, excluding ``R0`` (that is:
+ ``R1-R31``).
+- ``f``: A 32 or 64-bit float register (``F0-F31``), or when QPX is enabled, a
+ 128 or 256-bit QPX register (``Q0-Q31``; aliases the ``F`` registers).
+- ``v``: For ``4 x f32`` or ``4 x f64`` types, when QPX is enabled, a
+ 128 or 256-bit QPX register (``Q0-Q31``), otherwise a 128-bit
+ altivec vector register (``V0-V31``).
+
+ .. FIXME: is this a bug that v accepts QPX registers? I think this
+ is supposed to only use the altivec vector registers?
+
+- ``y``: Condition register (``CR0-CR7``).
+- ``wc``: An individual CR bit in a CR register.
+- ``wa``, ``wd``, ``wf``: Any 128-bit VSX vector register, from the full VSX
+ register set (overlapping both the floating-point and vector register files).
+- ``ws``: A 32 or 64-bit floating point register, from the full VSX register
+ set.
+
+Sparc:
+
+- ``I``: An immediate 13-bit signed integer.
+- ``r``: A 32-bit integer register.
+
+SystemZ:
+
+- ``I``: An immediate unsigned 8-bit integer.
+- ``J``: An immediate unsigned 12-bit integer.
+- ``K``: An immediate signed 16-bit integer.
+- ``L``: An immediate signed 20-bit integer.
+- ``M``: An immediate integer 0x7fffffff.
+- ``Q``, ``R``, ``S``, ``T``: A memory address operand, treated the same as
+ ``m``, at the moment.
+- ``r`` or ``d``: A 32, 64, or 128-bit integer register.
+- ``a``: A 32, 64, or 128-bit integer address register (excludes R0, which in an
+ address context evaluates as zero).
+- ``h``: A 32-bit value in the high part of a 64bit data register
+ (LLVM-specific)
+- ``f``: A 32, 64, or 128-bit floating point register.
+
+X86:
+
+- ``I``: An immediate integer between 0 and 31.
+- ``J``: An immediate integer between 0 and 64.
+- ``K``: An immediate signed 8-bit integer.
+- ``L``: An immediate integer, 0xff or 0xffff or (in 64-bit mode only)
+ 0xffffffff.
+- ``M``: An immediate integer between 0 and 3.
+- ``N``: An immediate unsigned 8-bit integer.
+- ``O``: An immediate integer between 0 and 127.
+- ``e``: An immediate 32-bit signed integer.
+- ``Z``: An immediate 32-bit unsigned integer.
+- ``o``, ``v``: Treated the same as ``m``, at the moment.
+- ``q``: An 8, 16, 32, or 64-bit register which can be accessed as an 8-bit
+ ``l`` integer register. On X86-32, this is the ``a``, ``b``, ``c``, and ``d``
+ registers, and on X86-64, it is all of the integer registers.
+- ``Q``: An 8, 16, 32, or 64-bit register which can be accessed as an 8-bit
+ ``h`` integer register. This is the ``a``, ``b``, ``c``, and ``d`` registers.
+- ``r`` or ``l``: An 8, 16, 32, or 64-bit integer register.
+- ``R``: An 8, 16, 32, or 64-bit "legacy" integer register -- one which has
+ existed since i386, and can be accessed without the REX prefix.
+- ``f``: A 32, 64, or 80-bit '387 FPU stack pseudo-register.
+- ``y``: A 64-bit MMX register, if MMX is enabled.
+- ``x``: If SSE is enabled: a 32 or 64-bit scalar operand, or 128-bit vector
+ operand in a SSE register. If AVX is also enabled, can also be a 256-bit
+ vector operand in an AVX register. If AVX-512 is also enabled, can also be a
+ 512-bit vector operand in an AVX512 register, Otherwise, an error.
+- ``Y``: The same as ``x``, if *SSE2* is enabled, otherwise an error.
+- ``A``: Special case: allocates EAX first, then EDX, for a single operand (in
+ 32-bit mode, a 64-bit integer operand will get split into two registers). It
+ is not recommended to use this constraint, as in 64-bit mode, the 64-bit
+ operand will get allocated only to RAX -- if two 32-bit operands are needed,
+ you're better off splitting it yourself, before passing it to the asm
+ statement.
+
+XCore:
+
+- ``r``: A 32-bit integer register.
+
+
+.. _inline-asm-modifiers:
+
+Asm template argument modifiers
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+In the asm template string, modifiers can be used on the operand reference, like
+"``${0:n}``".
+
+The modifiers are, in general, expected to behave the same way they do in
+GCC. LLVM's support is often implemented on an 'as-needed' basis, to support C
+inline asm code which was supported by GCC. A mismatch in behavior between LLVM
+and GCC likely indicates a bug in LLVM.
+
+Target-independent:
+
+- ``c``: Print an immediate integer constant unadorned, without
+ the target-specific immediate punctuation (e.g. no ``$`` prefix).
+- ``n``: Negate and print immediate integer constant unadorned, without the
+ target-specific immediate punctuation (e.g. no ``$`` prefix).
+- ``l``: Print as an unadorned label, without the target-specific label
+ punctuation (e.g. no ``$`` prefix).
+
+AArch64:
+
+- ``w``: Print a GPR register with a ``w*`` name instead of ``x*`` name. E.g.,
+ instead of ``x30``, print ``w30``.
+- ``x``: Print a GPR register with a ``x*`` name. (this is the default, anyhow).
+- ``b``, ``h``, ``s``, ``d``, ``q``: Print a floating-point/SIMD register with a
+ ``b*``, ``h*``, ``s*``, ``d*``, or ``q*`` name, rather than the default of
+ ``v*``.
+
+AMDGPU:
+
+- ``r``: No effect.
+
+ARM:
+
+- ``a``: Print an operand as an address (with ``[`` and ``]`` surrounding a
+ register).
+- ``P``: No effect.
+- ``q``: No effect.
+- ``y``: Print a VFP single-precision register as an indexed double (e.g. print
+ as ``d4[1]`` instead of ``s9``)
+- ``B``: Bitwise invert and print an immediate integer constant without ``#``
+ prefix.
+- ``L``: Print the low 16-bits of an immediate integer constant.
+- ``M``: Print as a register set suitable for ldm/stm. Also prints *all*
+ register operands subsequent to the specified one (!), so use carefully.
+- ``Q``: Print the low-order register of a register-pair, or the low-order
+ register of a two-register operand.
+- ``R``: Print the high-order register of a register-pair, or the high-order
+ register of a two-register operand.
+- ``H``: Print the second register of a register-pair. (On a big-endian system,
+ ``H`` is equivalent to ``Q``, and on little-endian system, ``H`` is equivalent
+ to ``R``.)
+
+ .. FIXME: H doesn't currently support printing the second register
+ of a two-register operand.
+
+- ``e``: Print the low doubleword register of a NEON quad register.
+- ``f``: Print the high doubleword register of a NEON quad register.
+- ``m``: Print the base register of a memory operand without the ``[`` and ``]``
+ adornment.
+
+Hexagon:
+
+- ``L``: Print the second register of a two-register operand. Requires that it
+ has been allocated consecutively to the first.
+
+ .. FIXME: why is it restricted to consecutive ones? And there's
+ nothing that ensures that happens, is there?
+
+- ``I``: Print the letter 'i' if the operand is an integer constant, otherwise
+ nothing. Used to print 'addi' vs 'add' instructions.
+
+MSP430:
+
+No additional modifiers.
+
+MIPS:
+
+- ``X``: Print an immediate integer as hexadecimal
+- ``x``: Print the low 16 bits of an immediate integer as hexadecimal.
+- ``d``: Print an immediate integer as decimal.
+- ``m``: Subtract one and print an immediate integer as decimal.
+- ``z``: Print $0 if an immediate zero, otherwise print normally.
+- ``L``: Print the low-order register of a two-register operand, or prints the
+ address of the low-order word of a double-word memory operand.
+
+ .. FIXME: L seems to be missing memory operand support.
+
+- ``M``: Print the high-order register of a two-register operand, or prints the
+ address of the high-order word of a double-word memory operand.
+
+ .. FIXME: M seems to be missing memory operand support.
+
+- ``D``: Print the second register of a two-register operand, or prints the
+ second word of a double-word memory operand. (On a big-endian system, ``D`` is
+ equivalent to ``L``, and on little-endian system, ``D`` is equivalent to
+ ``M``.)
+- ``w``: No effect.
+
+NVPTX:
+
+- ``r``: No effect.
+
+PowerPC:
+
+- ``L``: Print the second register of a two-register operand. Requires that it
+ has been allocated consecutively to the first.
+
+ .. FIXME: why is it restricted to consecutive ones? And there's
+ nothing that ensures that happens, is there?
+
+- ``I``: Print the letter 'i' if the operand is an integer constant, otherwise
+ nothing. Used to print 'addi' vs 'add' instructions.
+- ``y``: For a memory operand, prints formatter for a two-register X-form
+ instruction. (Currently always prints ``r0,OPERAND``).
+- ``U``: Prints 'u' if the memory operand is an update form, and nothing
+ otherwise. (NOTE: LLVM does not support update form, so this will currently
+ always print nothing)
+- ``X``: Prints 'x' if the memory operand is an indexed form. (NOTE: LLVM does
+ not support indexed form, so this will currently always print nothing)
+
+Sparc:
+
+- ``r``: No effect.
+
+SystemZ:
+
+SystemZ implements only ``n``, and does *not* support any of the other
+target-independent modifiers.
+
+X86:
+
+- ``c``: Print an unadorned integer or symbol name. (The latter is
+ target-specific behavior for this typically target-independent modifier).
+- ``A``: Print a register name with a '``*``' before it.
+- ``b``: Print an 8-bit register name (e.g. ``al``); do nothing on a memory
+ operand.
+- ``h``: Print the upper 8-bit register name (e.g. ``ah``); do nothing on a
+ memory operand.
+- ``w``: Print the 16-bit register name (e.g. ``ax``); do nothing on a memory
+ operand.
+- ``k``: Print the 32-bit register name (e.g. ``eax``); do nothing on a memory
+ operand.
+- ``q``: Print the 64-bit register name (e.g. ``rax``), if 64-bit registers are
+ available, otherwise the 32-bit register name; do nothing on a memory operand.
+- ``n``: Negate and print an unadorned integer, or, for operands other than an
+ immediate integer (e.g. a relocatable symbol expression), print a '-' before
+ the operand. (The behavior for relocatable symbol expressions is a
+ target-specific behavior for this typically target-independent modifier)
+- ``H``: Print a memory reference with additional offset +8.
+- ``P``: Print a memory reference or operand for use as the argument of a call
+ instruction. (E.g. omit ``(rip)``, even though it's PC-relative.)
+
+XCore:
+
+No additional modifiers.
+
+
Inline Asm Metadata
^^^^^^^^^^^^^^^^^^^
More information about the llvm-commits
mailing list