[www-releases] r238135 - Add 3.6.1 LLVM Docs.
Tom Stellard
thomas.stellard at amd.com
Mon May 25 06:53:05 PDT 2015
Added: www-releases/trunk/3.6.1/docs/_sources/Passes.txt
URL: http://llvm.org/viewvc/llvm-project/www-releases/trunk/3.6.1/docs/_sources/Passes.txt?rev=238135&view=auto
==============================================================================
--- www-releases/trunk/3.6.1/docs/_sources/Passes.txt (added)
+++ www-releases/trunk/3.6.1/docs/_sources/Passes.txt Mon May 25 08:53:02 2015
@@ -0,0 +1,1200 @@
+..
+ If Passes.html is up to date, the following "one-liner" should print
+ an empty diff.
+
+ egrep -e '^<tr><td><a href="#.*">-.*</a></td><td>.*</td></tr>$' \
+ -e '^ <a name=".*">.*</a>$' < Passes.html >html; \
+ perl >help <<'EOT' && diff -u help html; rm -f help html
+ open HTML, "<Passes.html" or die "open: Passes.html: $!\n";
+ while (<HTML>) {
+ m:^<tr><td><a href="#(.*)">-.*</a></td><td>.*</td></tr>$: or next;
+ $order{$1} = sprintf("%03d", 1 + int %order);
+ }
+ open HELP, "../Release/bin/opt -help|" or die "open: opt -help: $!\n";
+ while (<HELP>) {
+ m:^ -([^ ]+) +- (.*)$: or next;
+ my $o = $order{$1};
+ $o = "000" unless defined $o;
+ push @x, "$o<tr><td><a href=\"#$1\">-$1</a></td><td>$2</td></tr>\n";
+ push @y, "$o <a name=\"$1\">-$1: $2</a>\n";
+ }
+ @x = map { s/^\d\d\d//; $_ } sort @x;
+ @y = map { s/^\d\d\d//; $_ } sort @y;
+ print @x, @y;
+ EOT
+
+ This (real) one-liner can also be helpful when converting comments to HTML:
+
+ perl -e '$/ = undef; for (split(/\n/, <>)) { s:^ *///? ?::; print " <p>\n" if !$on && $_ =~ /\S/; print " </p>\n" if $on && $_ =~ /^\s*$/; print " $_\n"; $on = ($_ =~ /\S/); } print " </p>\n" if $on'
+
+====================================
+LLVM's Analysis and Transform Passes
+====================================
+
+.. contents::
+ :local:
+
+Introduction
+============
+
+This document serves as a high level summary of the optimization features that
+LLVM provides. Optimizations are implemented as Passes that traverse some
+portion of a program to either collect information or transform the program.
+The table below divides the passes that LLVM provides into three categories.
+Analysis passes compute information that other passes can use or for debugging
+or program visualization purposes. Transform passes can use (or invalidate)
+the analysis passes. Transform passes all mutate the program in some way.
+Utility passes provides some utility but don't otherwise fit categorization.
+For example passes to extract functions to bitcode or write a module to bitcode
+are neither analysis nor transform passes. The table of contents above
+provides a quick summary of each pass and links to the more complete pass
+description later in the document.
+
+Analysis Passes
+===============
+
+This section describes the LLVM Analysis Passes.
+
+``-aa-eval``: Exhaustive Alias Analysis Precision Evaluator
+-----------------------------------------------------------
+
+This is a simple N^2 alias analysis accuracy evaluator. Basically, for each
+function in the program, it simply queries to see how the alias analysis
+implementation answers alias queries between each pair of pointers in the
+function.
+
+This is inspired and adapted from code by: Naveen Neelakantam, Francesco
+Spadini, and Wojciech Stryjewski.
+
+``-basicaa``: Basic Alias Analysis (stateless AA impl)
+------------------------------------------------------
+
+A basic alias analysis pass that implements identities (two different globals
+cannot alias, etc), but does no stateful analysis.
+
+``-basiccg``: Basic CallGraph Construction
+------------------------------------------
+
+Yet to be written.
+
+``-count-aa``: Count Alias Analysis Query Responses
+---------------------------------------------------
+
+A pass which can be used to count how many alias queries are being made and how
+the alias analysis implementation being used responds.
+
+``-da``: Dependence Analysis
+----------------------------
+
+Dependence analysis framework, which is used to detect dependences in memory
+accesses.
+
+``-debug-aa``: AA use debugger
+------------------------------
+
+This simple pass checks alias analysis users to ensure that if they create a
+new value, they do not query AA without informing it of the value. It acts as
+a shim over any other AA pass you want.
+
+Yes keeping track of every value in the program is expensive, but this is a
+debugging pass.
+
+``-domfrontier``: Dominance Frontier Construction
+-------------------------------------------------
+
+This pass is a simple dominator construction algorithm for finding forward
+dominator frontiers.
+
+``-domtree``: Dominator Tree Construction
+-----------------------------------------
+
+This pass is a simple dominator construction algorithm for finding forward
+dominators.
+
+
+``-dot-callgraph``: Print Call Graph to "dot" file
+--------------------------------------------------
+
+This pass, only available in ``opt``, prints the call graph into a ``.dot``
+graph. This graph can then be processed with the "dot" tool to convert it to
+postscript or some other suitable format.
+
+``-dot-cfg``: Print CFG of function to "dot" file
+-------------------------------------------------
+
+This pass, only available in ``opt``, prints the control flow graph into a
+``.dot`` graph. This graph can then be processed with the :program:`dot` tool
+to convert it to postscript or some other suitable format.
+
+``-dot-cfg-only``: Print CFG of function to "dot" file (with no function bodies)
+--------------------------------------------------------------------------------
+
+This pass, only available in ``opt``, prints the control flow graph into a
+``.dot`` graph, omitting the function bodies. This graph can then be processed
+with the :program:`dot` tool to convert it to postscript or some other suitable
+format.
+
+``-dot-dom``: Print dominance tree of function to "dot" file
+------------------------------------------------------------
+
+This pass, only available in ``opt``, prints the dominator tree into a ``.dot``
+graph. This graph can then be processed with the :program:`dot` tool to
+convert it to postscript or some other suitable format.
+
+``-dot-dom-only``: Print dominance tree of function to "dot" file (with no function bodies)
+-------------------------------------------------------------------------------------------
+
+This pass, only available in ``opt``, prints the dominator tree into a ``.dot``
+graph, omitting the function bodies. This graph can then be processed with the
+:program:`dot` tool to convert it to postscript or some other suitable format.
+
+``-dot-postdom``: Print postdominance tree of function to "dot" file
+--------------------------------------------------------------------
+
+This pass, only available in ``opt``, prints the post dominator tree into a
+``.dot`` graph. This graph can then be processed with the :program:`dot` tool
+to convert it to postscript or some other suitable format.
+
+``-dot-postdom-only``: Print postdominance tree of function to "dot" file (with no function bodies)
+---------------------------------------------------------------------------------------------------
+
+This pass, only available in ``opt``, prints the post dominator tree into a
+``.dot`` graph, omitting the function bodies. This graph can then be processed
+with the :program:`dot` tool to convert it to postscript or some other suitable
+format.
+
+``-globalsmodref-aa``: Simple mod/ref analysis for globals
+----------------------------------------------------------
+
+This simple pass provides alias and mod/ref information for global values that
+do not have their address taken, and keeps track of whether functions read or
+write memory (are "pure"). For this simple (but very common) case, we can
+provide pretty accurate and useful information.
+
+``-instcount``: Counts the various types of ``Instruction``\ s
+--------------------------------------------------------------
+
+This pass collects the count of all instructions and reports them.
+
+``-intervals``: Interval Partition Construction
+-----------------------------------------------
+
+This analysis calculates and represents the interval partition of a function,
+or a preexisting interval partition.
+
+In this way, the interval partition may be used to reduce a flow graph down to
+its degenerate single node interval partition (unless it is irreducible).
+
+``-iv-users``: Induction Variable Users
+---------------------------------------
+
+Bookkeeping for "interesting" users of expressions computed from induction
+variables.
+
+``-lazy-value-info``: Lazy Value Information Analysis
+-----------------------------------------------------
+
+Interface for lazy computation of value constraint information.
+
+``-libcall-aa``: LibCall Alias Analysis
+---------------------------------------
+
+LibCall Alias Analysis.
+
+``-lint``: Statically lint-checks LLVM IR
+-----------------------------------------
+
+This pass statically checks for common and easily-identified constructs which
+produce undefined or likely unintended behavior in LLVM IR.
+
+It is not a guarantee of correctness, in two ways. First, it isn't
+comprehensive. There are checks which could be done statically which are not
+yet implemented. Some of these are indicated by TODO comments, but those
+aren't comprehensive either. Second, many conditions cannot be checked
+statically. This pass does no dynamic instrumentation, so it can't check for
+all possible problems.
+
+Another limitation is that it assumes all code will be executed. A store
+through a null pointer in a basic block which is never reached is harmless, but
+this pass will warn about it anyway.
+
+Optimization passes may make conditions that this pass checks for more or less
+obvious. If an optimization pass appears to be introducing a warning, it may
+be that the optimization pass is merely exposing an existing condition in the
+code.
+
+This code may be run before :ref:`instcombine <passes-instcombine>`. In many
+cases, instcombine checks for the same kinds of things and turns instructions
+with undefined behavior into unreachable (or equivalent). Because of this,
+this pass makes some effort to look through bitcasts and so on.
+
+``-loops``: Natural Loop Information
+------------------------------------
+
+This analysis is used to identify natural loops and determine the loop depth of
+various nodes of the CFG. Note that the loops identified may actually be
+several natural loops that share the same header node... not just a single
+natural loop.
+
+``-memdep``: Memory Dependence Analysis
+---------------------------------------
+
+An analysis that determines, for a given memory operation, what preceding
+memory operations it depends on. It builds on alias analysis information, and
+tries to provide a lazy, caching interface to a common kind of alias
+information query.
+
+``-module-debuginfo``: Decodes module-level debug info
+------------------------------------------------------
+
+This pass decodes the debug info metadata in a module and prints in a
+(sufficiently-prepared-) human-readable form.
+
+For example, run this pass from ``opt`` along with the ``-analyze`` option, and
+it'll print to standard output.
+
+``-no-aa``: No Alias Analysis (always returns 'may' alias)
+----------------------------------------------------------
+
+This is the default implementation of the Alias Analysis interface. It always
+returns "I don't know" for alias queries. NoAA is unlike other alias analysis
+implementations, in that it does not chain to a previous analysis. As such it
+doesn't follow many of the rules that other alias analyses must.
+
+``-postdomfrontier``: Post-Dominance Frontier Construction
+----------------------------------------------------------
+
+This pass is a simple post-dominator construction algorithm for finding
+post-dominator frontiers.
+
+``-postdomtree``: Post-Dominator Tree Construction
+--------------------------------------------------
+
+This pass is a simple post-dominator construction algorithm for finding
+post-dominators.
+
+``-print-alias-sets``: Alias Set Printer
+----------------------------------------
+
+Yet to be written.
+
+``-print-callgraph``: Print a call graph
+----------------------------------------
+
+This pass, only available in ``opt``, prints the call graph to standard error
+in a human-readable form.
+
+``-print-callgraph-sccs``: Print SCCs of the Call Graph
+-------------------------------------------------------
+
+This pass, only available in ``opt``, prints the SCCs of the call graph to
+standard error in a human-readable form.
+
+``-print-cfg-sccs``: Print SCCs of each function CFG
+----------------------------------------------------
+
+This pass, only available in ``opt``, printsthe SCCs of each function CFG to
+standard error in a human-readable fom.
+
+``-print-dom-info``: Dominator Info Printer
+-------------------------------------------
+
+Dominator Info Printer.
+
+``-print-externalfnconstants``: Print external fn callsites passed constants
+----------------------------------------------------------------------------
+
+This pass, only available in ``opt``, prints out call sites to external
+functions that are called with constant arguments. This can be useful when
+looking for standard library functions we should constant fold or handle in
+alias analyses.
+
+``-print-function``: Print function to stderr
+---------------------------------------------
+
+The ``PrintFunctionPass`` class is designed to be pipelined with other
+``FunctionPasses``, and prints out the functions of the module as they are
+processed.
+
+``-print-module``: Print module to stderr
+-----------------------------------------
+
+This pass simply prints out the entire module when it is executed.
+
+.. _passes-print-used-types:
+
+``-print-used-types``: Find Used Types
+--------------------------------------
+
+This pass is used to seek out all of the types in use by the program. Note
+that this analysis explicitly does not include types only used by the symbol
+table.
+
+``-regions``: Detect single entry single exit regions
+-----------------------------------------------------
+
+The ``RegionInfo`` pass detects single entry single exit regions in a function,
+where a region is defined as any subgraph that is connected to the remaining
+graph at only two spots. Furthermore, an hierarchical region tree is built.
+
+``-scalar-evolution``: Scalar Evolution Analysis
+------------------------------------------------
+
+The ``ScalarEvolution`` analysis can be used to analyze and catagorize scalar
+expressions in loops. It specializes in recognizing general induction
+variables, representing them with the abstract and opaque ``SCEV`` class.
+Given this analysis, trip counts of loops and other important properties can be
+obtained.
+
+This analysis is primarily useful for induction variable substitution and
+strength reduction.
+
+``-scev-aa``: ScalarEvolution-based Alias Analysis
+--------------------------------------------------
+
+Simple alias analysis implemented in terms of ``ScalarEvolution`` queries.
+
+This differs from traditional loop dependence analysis in that it tests for
+dependencies within a single iteration of a loop, rather than dependencies
+between different iterations.
+
+``ScalarEvolution`` has a more complete understanding of pointer arithmetic
+than ``BasicAliasAnalysis``' collection of ad-hoc analyses.
+
+``-targetdata``: Target Data Layout
+-----------------------------------
+
+Provides other passes access to information on how the size and alignment
+required by the target ABI for various data types.
+
+Transform Passes
+================
+
+This section describes the LLVM Transform Passes.
+
+``-adce``: Aggressive Dead Code Elimination
+-------------------------------------------
+
+ADCE aggressively tries to eliminate code. This pass is similar to :ref:`DCE
+<passes-dce>` but it assumes that values are dead until proven otherwise. This
+is similar to :ref:`SCCP <passes-sccp>`, except applied to the liveness of
+values.
+
+``-always-inline``: Inliner for ``always_inline`` functions
+-----------------------------------------------------------
+
+A custom inliner that handles only functions that are marked as "always
+inline".
+
+``-argpromotion``: Promote 'by reference' arguments to scalars
+--------------------------------------------------------------
+
+This pass promotes "by reference" arguments to be "by value" arguments. In
+practice, this means looking for internal functions that have pointer
+arguments. If it can prove, through the use of alias analysis, that an
+argument is *only* loaded, then it can pass the value into the function instead
+of the address of the value. This can cause recursive simplification of code
+and lead to the elimination of allocas (especially in C++ template code like
+the STL).
+
+This pass also handles aggregate arguments that are passed into a function,
+scalarizing them if the elements of the aggregate are only loaded. Note that
+it refuses to scalarize aggregates which would require passing in more than
+three operands to the function, because passing thousands of operands for a
+large array or structure is unprofitable!
+
+Note that this transformation could also be done for arguments that are only
+stored to (returning the value instead), but does not currently. This case
+would be best handled when and if LLVM starts supporting multiple return values
+from functions.
+
+``-bb-vectorize``: Basic-Block Vectorization
+--------------------------------------------
+
+This pass combines instructions inside basic blocks to form vector
+instructions. It iterates over each basic block, attempting to pair compatible
+instructions, repeating this process until no additional pairs are selected for
+vectorization. When the outputs of some pair of compatible instructions are
+used as inputs by some other pair of compatible instructions, those pairs are
+part of a potential vectorization chain. Instruction pairs are only fused into
+vector instructions when they are part of a chain longer than some threshold
+length. Moreover, the pass attempts to find the best possible chain for each
+pair of compatible instructions. These heuristics are intended to prevent
+vectorization in cases where it would not yield a performance increase of the
+resulting code.
+
+``-block-placement``: Profile Guided Basic Block Placement
+----------------------------------------------------------
+
+This pass is a very simple profile guided basic block placement algorithm. The
+idea is to put frequently executed blocks together at the start of the function
+and hopefully increase the number of fall-through conditional branches. If
+there is no profile information for a particular function, this pass basically
+orders blocks in depth-first order.
+
+``-break-crit-edges``: Break critical edges in CFG
+--------------------------------------------------
+
+Break all of the critical edges in the CFG by inserting a dummy basic block.
+It may be "required" by passes that cannot deal with critical edges. This
+transformation obviously invalidates the CFG, but can update forward dominator
+(set, immediate dominators, tree, and frontier) information.
+
+``-codegenprepare``: Optimize for code generation
+-------------------------------------------------
+
+This pass munges the code in the input function to better prepare it for
+SelectionDAG-based code generation. This works around limitations in its
+basic-block-at-a-time approach. It should eventually be removed.
+
+``-constmerge``: Merge Duplicate Global Constants
+-------------------------------------------------
+
+Merges duplicate global constants together into a single constant that is
+shared. This is useful because some passes (i.e., TraceValues) insert a lot of
+string constants into the program, regardless of whether or not an existing
+string is available.
+
+``-constprop``: Simple constant propagation
+-------------------------------------------
+
+This pass implements constant propagation and merging. It looks for
+instructions involving only constant operands and replaces them with a constant
+value instead of an instruction. For example:
+
+.. code-block:: llvm
+
+ add i32 1, 2
+
+becomes
+
+.. code-block:: llvm
+
+ i32 3
+
+NOTE: this pass has a habit of making definitions be dead. It is a good idea
+to run a :ref:`Dead Instruction Elimination <passes-die>` pass sometime after
+running this pass.
+
+.. _passes-dce:
+
+``-dce``: Dead Code Elimination
+-------------------------------
+
+Dead code elimination is similar to :ref:`dead instruction elimination
+<passes-die>`, but it rechecks instructions that were used by removed
+instructions to see if they are newly dead.
+
+``-deadargelim``: Dead Argument Elimination
+-------------------------------------------
+
+This pass deletes dead arguments from internal functions. Dead argument
+elimination removes arguments which are directly dead, as well as arguments
+only passed into function calls as dead arguments of other functions. This
+pass also deletes dead arguments in a similar way.
+
+This pass is often useful as a cleanup pass to run after aggressive
+interprocedural passes, which add possibly-dead arguments.
+
+``-deadtypeelim``: Dead Type Elimination
+----------------------------------------
+
+This pass is used to cleanup the output of GCC. It eliminate names for types
+that are unused in the entire translation unit, using the :ref:`find used types
+<passes-print-used-types>` pass.
+
+.. _passes-die:
+
+``-die``: Dead Instruction Elimination
+--------------------------------------
+
+Dead instruction elimination performs a single pass over the function, removing
+instructions that are obviously dead.
+
+``-dse``: Dead Store Elimination
+--------------------------------
+
+A trivial dead store elimination that only considers basic-block local
+redundant stores.
+
+.. _passes-functionattrs:
+
+``-functionattrs``: Deduce function attributes
+----------------------------------------------
+
+A simple interprocedural pass which walks the call-graph, looking for functions
+which do not access or only read non-local memory, and marking them
+``readnone``/``readonly``. In addition, it marks function arguments (of
+pointer type) "``nocapture``" if a call to the function does not create any
+copies of the pointer value that outlive the call. This more or less means
+that the pointer is only dereferenced, and not returned from the function or
+stored in a global. This pass is implemented as a bottom-up traversal of the
+call-graph.
+
+``-globaldce``: Dead Global Elimination
+---------------------------------------
+
+This transform is designed to eliminate unreachable internal globals from the
+program. It uses an aggressive algorithm, searching out globals that are known
+to be alive. After it finds all of the globals which are needed, it deletes
+whatever is left over. This allows it to delete recursive chunks of the
+program which are unreachable.
+
+``-globalopt``: Global Variable Optimizer
+-----------------------------------------
+
+This pass transforms simple global variables that never have their address
+taken. If obviously true, it marks read/write globals as constant, deletes
+variables only stored to, etc.
+
+``-gvn``: Global Value Numbering
+--------------------------------
+
+This pass performs global value numbering to eliminate fully and partially
+redundant instructions. It also performs redundant load elimination.
+
+.. _passes-indvars:
+
+``-indvars``: Canonicalize Induction Variables
+----------------------------------------------
+
+This transformation analyzes and transforms the induction variables (and
+computations derived from them) into simpler forms suitable for subsequent
+analysis and transformation.
+
+This transformation makes the following changes to each loop with an
+identifiable induction variable:
+
+* All loops are transformed to have a *single* canonical induction variable
+ which starts at zero and steps by one.
+* The canonical induction variable is guaranteed to be the first PHI node in
+ the loop header block.
+* Any pointer arithmetic recurrences are raised to use array subscripts.
+
+If the trip count of a loop is computable, this pass also makes the following
+changes:
+
+* The exit condition for the loop is canonicalized to compare the induction
+ value against the exit value. This turns loops like:
+
+ .. code-block:: c++
+
+ for (i = 7; i*i < 1000; ++i)
+
+ into
+
+ .. code-block:: c++
+
+ for (i = 0; i != 25; ++i)
+
+* Any use outside of the loop of an expression derived from the indvar is
+ changed to compute the derived value outside of the loop, eliminating the
+ dependence on the exit value of the induction variable. If the only purpose
+ of the loop is to compute the exit value of some derived expression, this
+ transformation will make the loop dead.
+
+This transformation should be followed by strength reduction after all of the
+desired loop transformations have been performed. Additionally, on targets
+where it is profitable, the loop could be transformed to count down to zero
+(the "do loop" optimization).
+
+``-inline``: Function Integration/Inlining
+------------------------------------------
+
+Bottom-up inlining of functions into callees.
+
+.. _passes-instcombine:
+
+``-instcombine``: Combine redundant instructions
+------------------------------------------------
+
+Combine instructions to form fewer, simple instructions. This pass does not
+modify the CFG. This pass is where algebraic simplification happens.
+
+This pass combines things like:
+
+.. code-block:: llvm
+
+ %Y = add i32 %X, 1
+ %Z = add i32 %Y, 1
+
+into:
+
+.. code-block:: llvm
+
+ %Z = add i32 %X, 2
+
+This is a simple worklist driven algorithm.
+
+This pass guarantees that the following canonicalizations are performed on the
+program:
+
+#. If a binary operator has a constant operand, it is moved to the right-hand
+ side.
+#. Bitwise operators with constant operands are always grouped so that shifts
+ are performed first, then ``or``\ s, then ``and``\ s, then ``xor``\ s.
+#. Compare instructions are converted from ``<``, ``>``, ``â¤``, or ``â¥`` to
+ ``=`` or ``â `` if possible.
+#. All ``cmp`` instructions on boolean values are replaced with logical
+ operations.
+#. ``add X, X`` is represented as ``mul X, 2`` â ``shl X, 1``
+#. Multiplies with a constant power-of-two argument are transformed into
+ shifts.
+#. ⦠etc.
+
+This pass can also simplify calls to specific well-known function calls (e.g.
+runtime library functions). For example, a call ``exit(3)`` that occurs within
+the ``main()`` function can be transformed into simply ``return 3``. Whether or
+not library calls are simplified is controlled by the
+:ref:`-functionattrs <passes-functionattrs>` pass and LLVM's knowledge of
+library calls on different targets.
+
+``-internalize``: Internalize Global Symbols
+--------------------------------------------
+
+This pass loops over all of the functions in the input module, looking for a
+main function. If a main function is found, all other functions and all global
+variables with initializers are marked as internal.
+
+``-ipconstprop``: Interprocedural constant propagation
+------------------------------------------------------
+
+This pass implements an *extremely* simple interprocedural constant propagation
+pass. It could certainly be improved in many different ways, like using a
+worklist. This pass makes arguments dead, but does not remove them. The
+existing dead argument elimination pass should be run after this to clean up
+the mess.
+
+``-ipsccp``: Interprocedural Sparse Conditional Constant Propagation
+--------------------------------------------------------------------
+
+An interprocedural variant of :ref:`Sparse Conditional Constant Propagation
+<passes-sccp>`.
+
+``-jump-threading``: Jump Threading
+-----------------------------------
+
+Jump threading tries to find distinct threads of control flow running through a
+basic block. This pass looks at blocks that have multiple predecessors and
+multiple successors. If one or more of the predecessors of the block can be
+proven to always cause a jump to one of the successors, we forward the edge
+from the predecessor to the successor by duplicating the contents of this
+block.
+
+An example of when this can occur is code like this:
+
+.. code-block:: c++
+
+ if () { ...
+ X = 4;
+ }
+ if (X < 3) {
+
+In this case, the unconditional branch at the end of the first if can be
+revectored to the false side of the second if.
+
+``-lcssa``: Loop-Closed SSA Form Pass
+-------------------------------------
+
+This pass transforms loops by placing phi nodes at the end of the loops for all
+values that are live across the loop boundary. For example, it turns the left
+into the right code:
+
+.. code-block:: c++
+
+ for (...) for (...)
+ if (c) if (c)
+ X1 = ... X1 = ...
+ else else
+ X2 = ... X2 = ...
+ X3 = phi(X1, X2) X3 = phi(X1, X2)
+ ... = X3 + 4 X4 = phi(X3)
+ ... = X4 + 4
+
+This is still valid LLVM; the extra phi nodes are purely redundant, and will be
+trivially eliminated by ``InstCombine``. The major benefit of this
+transformation is that it makes many other loop optimizations, such as
+``LoopUnswitch``\ ing, simpler.
+
+.. _passes-licm:
+
+``-licm``: Loop Invariant Code Motion
+-------------------------------------
+
+This pass performs loop invariant code motion, attempting to remove as much
+code from the body of a loop as possible. It does this by either hoisting code
+into the preheader block, or by sinking code to the exit blocks if it is safe.
+This pass also promotes must-aliased memory locations in the loop to live in
+registers, thus hoisting and sinking "invariant" loads and stores.
+
+This pass uses alias analysis for two purposes:
+
+#. Moving loop invariant loads and calls out of loops. If we can determine
+ that a load or call inside of a loop never aliases anything stored to, we
+ can hoist it or sink it like any other instruction.
+
+#. Scalar Promotion of Memory. If there is a store instruction inside of the
+ loop, we try to move the store to happen AFTER the loop instead of inside of
+ the loop. This can only happen if a few conditions are true:
+
+ #. The pointer stored through is loop invariant.
+ #. There are no stores or loads in the loop which *may* alias the pointer.
+ There are no calls in the loop which mod/ref the pointer.
+
+ If these conditions are true, we can promote the loads and stores in the
+ loop of the pointer to use a temporary alloca'd variable. We then use the
+ :ref:`mem2reg <passes-mem2reg>` functionality to construct the appropriate
+ SSA form for the variable.
+
+``-loop-deletion``: Delete dead loops
+-------------------------------------
+
+This file implements the Dead Loop Deletion Pass. This pass is responsible for
+eliminating loops with non-infinite computable trip counts that have no side
+effects or volatile instructions, and do not contribute to the computation of
+the function's return value.
+
+.. _passes-loop-extract:
+
+``-loop-extract``: Extract loops into new functions
+---------------------------------------------------
+
+A pass wrapper around the ``ExtractLoop()`` scalar transformation to extract
+each top-level loop into its own new function. If the loop is the *only* loop
+in a given function, it is not touched. This is a pass most useful for
+debugging via bugpoint.
+
+``-loop-extract-single``: Extract at most one loop into a new function
+----------------------------------------------------------------------
+
+Similar to :ref:`Extract loops into new functions <passes-loop-extract>`, this
+pass extracts one natural loop from the program into a function if it can.
+This is used by :program:`bugpoint`.
+
+``-loop-reduce``: Loop Strength Reduction
+-----------------------------------------
+
+This pass performs a strength reduction on array references inside loops that
+have as one or more of their components the loop induction variable. This is
+accomplished by creating a new value to hold the initial value of the array
+access for the first iteration, and then creating a new GEP instruction in the
+loop to increment the value by the appropriate amount.
+
+``-loop-rotate``: Rotate Loops
+------------------------------
+
+A simple loop rotation transformation.
+
+``-loop-simplify``: Canonicalize natural loops
+----------------------------------------------
+
+This pass performs several transformations to transform natural loops into a
+simpler form, which makes subsequent analyses and transformations simpler and
+more effective.
+
+Loop pre-header insertion guarantees that there is a single, non-critical entry
+edge from outside of the loop to the loop header. This simplifies a number of
+analyses and transformations, such as :ref:`LICM <passes-licm>`.
+
+Loop exit-block insertion guarantees that all exit blocks from the loop (blocks
+which are outside of the loop that have predecessors inside of the loop) only
+have predecessors from inside of the loop (and are thus dominated by the loop
+header). This simplifies transformations such as store-sinking that are built
+into LICM.
+
+This pass also guarantees that loops will have exactly one backedge.
+
+Note that the :ref:`simplifycfg <passes-simplifycfg>` pass will clean up blocks
+which are split out but end up being unnecessary, so usage of this pass should
+not pessimize generated code.
+
+This pass obviously modifies the CFG, but updates loop information and
+dominator information.
+
+``-loop-unroll``: Unroll loops
+------------------------------
+
+This pass implements a simple loop unroller. It works best when loops have
+been canonicalized by the :ref:`indvars <passes-indvars>` pass, allowing it to
+determine the trip counts of loops easily.
+
+``-loop-unswitch``: Unswitch loops
+----------------------------------
+
+This pass transforms loops that contain branches on loop-invariant conditions
+to have multiple loops. For example, it turns the left into the right code:
+
+.. code-block:: c++
+
+ for (...) if (lic)
+ A for (...)
+ if (lic) A; B; C
+ B else
+ C for (...)
+ A; C
+
+This can increase the size of the code exponentially (doubling it every time a
+loop is unswitched) so we only unswitch if the resultant code will be smaller
+than a threshold.
+
+This pass expects :ref:`LICM <passes-licm>` to be run before it to hoist
+invariant conditions out of the loop, to make the unswitching opportunity
+obvious.
+
+``-loweratomic``: Lower atomic intrinsics to non-atomic form
+------------------------------------------------------------
+
+This pass lowers atomic intrinsics to non-atomic form for use in a known
+non-preemptible environment.
+
+The pass does not verify that the environment is non-preemptible (in general
+this would require knowledge of the entire call graph of the program including
+any libraries which may not be available in bitcode form); it simply lowers
+every atomic intrinsic.
+
+``-lowerinvoke``: Lower invokes to calls, for unwindless code generators
+------------------------------------------------------------------------
+
+This transformation is designed for use by code generators which do not yet
+support stack unwinding. This pass converts ``invoke`` instructions to
+``call`` instructions, so that any exception-handling ``landingpad`` blocks
+become dead code (which can be removed by running the ``-simplifycfg`` pass
+afterwards).
+
+``-lowerswitch``: Lower ``SwitchInst``\ s to branches
+-----------------------------------------------------
+
+Rewrites switch instructions with a sequence of branches, which allows targets
+to get away with not implementing the switch instruction until it is
+convenient.
+
+.. _passes-mem2reg:
+
+``-mem2reg``: Promote Memory to Register
+----------------------------------------
+
+This file promotes memory references to be register references. It promotes
+alloca instructions which only have loads and stores as uses. An ``alloca`` is
+transformed by using dominator frontiers to place phi nodes, then traversing
+the function in depth-first order to rewrite loads and stores as appropriate.
+This is just the standard SSA construction algorithm to construct "pruned" SSA
+form.
+
+``-memcpyopt``: MemCpy Optimization
+-----------------------------------
+
+This pass performs various transformations related to eliminating ``memcpy``
+calls, or transforming sets of stores into ``memset``\ s.
+
+``-mergefunc``: Merge Functions
+-------------------------------
+
+This pass looks for equivalent functions that are mergable and folds them.
+
+Total-ordering is introduced among the functions set: we define comparison
+that answers for every two functions which of them is greater. It allows to
+arrange functions into the binary tree.
+
+For every new function we check for equivalent in tree.
+
+If equivalent exists we fold such functions. If both functions are overridable,
+we move the functionality into a new internal function and leave two
+overridable thunks to it.
+
+If there is no equivalent, then we add this function to tree.
+
+Lookup routine has O(log(n)) complexity, while whole merging process has
+complexity of O(n*log(n)).
+
+Read
+:doc:`this <MergeFunctions>`
+article for more details.
+
+``-mergereturn``: Unify function exit nodes
+-------------------------------------------
+
+Ensure that functions have at most one ``ret`` instruction in them.
+Additionally, it keeps track of which node is the new exit node of the CFG.
+
+``-partial-inliner``: Partial Inliner
+-------------------------------------
+
+This pass performs partial inlining, typically by inlining an ``if`` statement
+that surrounds the body of the function.
+
+``-prune-eh``: Remove unused exception handling info
+----------------------------------------------------
+
+This file implements a simple interprocedural pass which walks the call-graph,
+turning invoke instructions into call instructions if and only if the callee
+cannot throw an exception. It implements this as a bottom-up traversal of the
+call-graph.
+
+``-reassociate``: Reassociate expressions
+-----------------------------------------
+
+This pass reassociates commutative expressions in an order that is designed to
+promote better constant propagation, GCSE, :ref:`LICM <passes-licm>`, PRE, etc.
+
+For example: 4 + (x + 5) â x + (4 + 5)
+
+In the implementation of this algorithm, constants are assigned rank = 0,
+function arguments are rank = 1, and other values are assigned ranks
+corresponding to the reverse post order traversal of current function (starting
+at 2), which effectively gives values in deep loops higher rank than values not
+in loops.
+
+``-reg2mem``: Demote all values to stack slots
+----------------------------------------------
+
+This file demotes all registers to memory references. It is intended to be the
+inverse of :ref:`mem2reg <passes-mem2reg>`. By converting to ``load``
+instructions, the only values live across basic blocks are ``alloca``
+instructions and ``load`` instructions before ``phi`` nodes. It is intended
+that this should make CFG hacking much easier. To make later hacking easier,
+the entry block is split into two, such that all introduced ``alloca``
+instructions (and nothing else) are in the entry block.
+
+``-scalarrepl``: Scalar Replacement of Aggregates (DT)
+------------------------------------------------------
+
+The well-known scalar replacement of aggregates transformation. This transform
+breaks up ``alloca`` instructions of aggregate type (structure or array) into
+individual ``alloca`` instructions for each member if possible. Then, if
+possible, it transforms the individual ``alloca`` instructions into nice clean
+scalar SSA form.
+
+This combines a simple scalar replacement of aggregates algorithm with the
+:ref:`mem2reg <passes-mem2reg>` algorithm because they often interact,
+especially for C++ programs. As such, iterating between ``scalarrepl``, then
+:ref:`mem2reg <passes-mem2reg>` until we run out of things to promote works
+well.
+
+.. _passes-sccp:
+
+``-sccp``: Sparse Conditional Constant Propagation
+--------------------------------------------------
+
+Sparse conditional constant propagation and merging, which can be summarized
+as:
+
+* Assumes values are constant unless proven otherwise
+* Assumes BasicBlocks are dead unless proven otherwise
+* Proves values to be constant, and replaces them with constants
+* Proves conditional branches to be unconditional
+
+Note that this pass has a habit of making definitions be dead. It is a good
+idea to run a :ref:`DCE <passes-dce>` pass sometime after running this pass.
+
+.. _passes-simplifycfg:
+
+``-simplifycfg``: Simplify the CFG
+----------------------------------
+
+Performs dead code elimination and basic block merging. Specifically:
+
+* Removes basic blocks with no predecessors.
+* Merges a basic block into its predecessor if there is only one and the
+ predecessor only has one successor.
+* Eliminates PHI nodes for basic blocks with a single predecessor.
+* Eliminates a basic block that only contains an unconditional branch.
+
+``-sink``: Code sinking
+-----------------------
+
+This pass moves instructions into successor blocks, when possible, so that they
+aren't executed on paths where their results aren't needed.
+
+``-strip``: Strip all symbols from a module
+-------------------------------------------
+
+Performs code stripping. This transformation can delete:
+
+* names for virtual registers
+* symbols for internal globals and functions
+* debug information
+
+Note that this transformation makes code much less readable, so it should only
+be used in situations where the strip utility would be used, such as reducing
+code size or making it harder to reverse engineer code.
+
+``-strip-dead-debug-info``: Strip debug info for unused symbols
+---------------------------------------------------------------
+
+.. FIXME: this description is the same as for -strip
+
+performs code stripping. this transformation can delete:
+
+* names for virtual registers
+* symbols for internal globals and functions
+* debug information
+
+note that this transformation makes code much less readable, so it should only
+be used in situations where the strip utility would be used, such as reducing
+code size or making it harder to reverse engineer code.
+
+``-strip-dead-prototypes``: Strip Unused Function Prototypes
+------------------------------------------------------------
+
+This pass loops over all of the functions in the input module, looking for dead
+declarations and removes them. Dead declarations are declarations of functions
+for which no implementation is available (i.e., declarations for unused library
+functions).
+
+``-strip-debug-declare``: Strip all ``llvm.dbg.declare`` intrinsics
+-------------------------------------------------------------------
+
+.. FIXME: this description is the same as for -strip
+
+This pass implements code stripping. Specifically, it can delete:
+
+#. names for virtual registers
+#. symbols for internal globals and functions
+#. debug information
+
+Note that this transformation makes code much less readable, so it should only
+be used in situations where the 'strip' utility would be used, such as reducing
+code size or making it harder to reverse engineer code.
+
+``-strip-nondebug``: Strip all symbols, except dbg symbols, from a module
+-------------------------------------------------------------------------
+
+.. FIXME: this description is the same as for -strip
+
+This pass implements code stripping. Specifically, it can delete:
+
+#. names for virtual registers
+#. symbols for internal globals and functions
+#. debug information
+
+Note that this transformation makes code much less readable, so it should only
+be used in situations where the 'strip' utility would be used, such as reducing
+code size or making it harder to reverse engineer code.
+
+``-tailcallelim``: Tail Call Elimination
+----------------------------------------
+
+This file transforms calls of the current function (self recursion) followed by
+a return instruction with a branch to the entry of the function, creating a
+loop. This pass also implements the following extensions to the basic
+algorithm:
+
+#. Trivial instructions between the call and return do not prevent the
+ transformation from taking place, though currently the analysis cannot
+ support moving any really useful instructions (only dead ones).
+#. This pass transforms functions that are prevented from being tail recursive
+ by an associative expression to use an accumulator variable, thus compiling
+ the typical naive factorial or fib implementation into efficient code.
+#. TRE is performed if the function returns void, if the return returns the
+ result returned by the call, or if the function returns a run-time constant
+ on all exits from the function. It is possible, though unlikely, that the
+ return returns something else (like constant 0), and can still be TRE'd. It
+ can be TRE'd if *all other* return instructions in the function return the
+ exact same value.
+#. If it can prove that callees do not access theier caller stack frame, they
+ are marked as eligible for tail call elimination (by the code generator).
+
+Utility Passes
+==============
+
+This section describes the LLVM Utility Passes.
+
+``-deadarghaX0r``: Dead Argument Hacking (BUGPOINT USE ONLY; DO NOT USE)
+------------------------------------------------------------------------
+
+Same as dead argument elimination, but deletes arguments to functions which are
+external. This is only for use by :doc:`bugpoint <Bugpoint>`.
+
+``-extract-blocks``: Extract Basic Blocks From Module (for bugpoint use)
+------------------------------------------------------------------------
+
+This pass is used by bugpoint to extract all blocks from the module into their
+own functions.
+
+``-instnamer``: Assign names to anonymous instructions
+------------------------------------------------------
+
+This is a little utility pass that gives instructions names, this is mostly
+useful when diffing the effect of an optimization because deleting an unnamed
+instruction can change all other instruction numbering, making the diff very
+noisy.
+
+``-preverify``: Preliminary module verification
+-----------------------------------------------
+
+Ensures that the module is in the form required by the :ref:`Module Verifier
+<passes-verify>` pass. Running the verifier runs this pass automatically, so
+there should be no need to use it directly.
+
+.. _passes-verify:
+
+``-verify``: Module Verifier
+----------------------------
+
+Verifies an LLVM IR code. This is useful to run after an optimization which is
+undergoing testing. Note that llvm-as verifies its input before emitting
+bitcode, and also that malformed bitcode is likely to make LLVM crash. All
+language front-ends are therefore encouraged to verify their output before
+performing optimizing transformations.
+
+#. Both of a binary operator's parameters are of the same type.
+#. Verify that the indices of mem access instructions match other operands.
+#. Verify that arithmetic and other things are only performed on first-class
+ types. Verify that shifts and logicals only happen on integrals f.e.
+#. All of the constants in a switch statement are of the correct type.
+#. The code is in valid SSA form.
+#. It is illegal to put a label into any other type (like a structure) or to
+ return one.
+#. Only phi nodes can be self referential: ``%x = add i32 %x``, ``%x`` is
+ invalid.
+#. PHI nodes must have an entry for each predecessor, with no extras.
+#. PHI nodes must be the first thing in a basic block, all grouped together.
+#. PHI nodes must have at least one entry.
+#. All basic blocks should only end with terminator insts, not contain them.
+#. The entry node to a function must not have predecessors.
+#. All Instructions must be embedded into a basic block.
+#. Functions cannot take a void-typed parameter.
+#. Verify that a function's argument list agrees with its declared type.
+#. It is illegal to specify a name for a void value.
+#. It is illegal to have an internal global value with no initializer.
+#. It is illegal to have a ``ret`` instruction that returns a value that does
+ not agree with the function return value type.
+#. Function call argument types match the function prototype.
+#. All other things that are tested by asserts spread about the code.
+
+Note that this does not provide full security verification (like Java), but
+instead just tries to ensure that code is well-formed.
+
+``-view-cfg``: View CFG of function
+-----------------------------------
+
+Displays the control flow graph using the GraphViz tool.
+
+``-view-cfg-only``: View CFG of function (with no function bodies)
+------------------------------------------------------------------
+
+Displays the control flow graph using the GraphViz tool, but omitting function
+bodies.
+
+``-view-dom``: View dominance tree of function
+----------------------------------------------
+
+Displays the dominator tree using the GraphViz tool.
+
+``-view-dom-only``: View dominance tree of function (with no function bodies)
+-----------------------------------------------------------------------------
+
+Displays the dominator tree using the GraphViz tool, but omitting function
+bodies.
+
+``-view-postdom``: View postdominance tree of function
+------------------------------------------------------
+
+Displays the post dominator tree using the GraphViz tool.
+
+``-view-postdom-only``: View postdominance tree of function (with no function bodies)
+-------------------------------------------------------------------------------------
+
+Displays the post dominator tree using the GraphViz tool, but omitting function
+bodies.
+
Added: www-releases/trunk/3.6.1/docs/_sources/Phabricator.txt
URL: http://llvm.org/viewvc/llvm-project/www-releases/trunk/3.6.1/docs/_sources/Phabricator.txt?rev=238135&view=auto
==============================================================================
--- www-releases/trunk/3.6.1/docs/_sources/Phabricator.txt (added)
+++ www-releases/trunk/3.6.1/docs/_sources/Phabricator.txt Mon May 25 08:53:02 2015
@@ -0,0 +1,140 @@
+=============================
+Code Reviews with Phabricator
+=============================
+
+.. contents::
+ :local:
+
+If you prefer to use a web user interface for code reviews, you can now submit
+your patches for Clang and LLVM at `LLVM's Phabricator`_ instance.
+
+While Phabricator is a useful tool for some, the relevant -commits mailing list
+is the system of record for all LLVM code review. The mailing list should be
+added as a subscriber on all reviews, and Phabricator users should be prepared
+to respond to free-form comments in mail sent to the commits list.
+
+Sign up
+-------
+
+To get started with Phabricator, navigate to `http://reviews.llvm.org`_ and
+click the power icon in the top right. You can register with a GitHub account,
+a Google account, or you can create your own profile.
+
+Make *sure* that the email address registered with Phabricator is subscribed
+to the relevant -commits mailing list. If your are not subscribed to the commit
+list, all mail sent by Phabricator on your behalf will be held for moderation.
+
+Note that if you use your Subversion user name as Phabricator user name,
+Phabricator will automatically connect your submits to your Phabricator user in
+the `Code Repository Browser`_.
+
+Requesting a review via the command line
+----------------------------------------
+
+Phabricator has a tool called *Arcanist* to upload patches from
+the command line. To get you set up, follow the
+`Arcanist Quick Start`_ instructions.
+
+You can learn more about how to use arc to interact with
+Phabricator in the `Arcanist User Guide`_.
+
+Requesting a review via the web interface
+-----------------------------------------
+
+The tool to create and review patches in Phabricator is called
+*Differential*.
+
+Note that you can upload patches created through various diff tools,
+including git and svn. To make reviews easier, please always include
+**as much context as possible** with your diff! Don't worry, Phabricator
+will automatically send a diff with a smaller context in the review
+email, but having the full file in the web interface will help the
+reviewer understand your code.
+
+To get a full diff, use one of the following commands (or just use Arcanist
+to upload your patch):
+
+* ``git diff -U999999 other-branch``
+* ``svn diff --diff-cmd=diff -x -U999999``
+
+To upload a new patch:
+
+* Click *Differential*.
+* Click *Create Diff*.
+* Paste the text diff or upload the patch file.
+ Note that TODO
+* Leave the drop down on *Create a new Revision...* and click *Continue*.
+* Enter a descriptive title and summary; add reviewers and mailing
+ lists that you want to be included in the review. If your patch is
+ for LLVM, add llvm-commits as a subscriber; if your patch is for Clang,
+ add cfe-commits.
+* Click *Save*.
+
+To submit an updated patch:
+
+* Click *Differential*.
+* Click *Create Diff*.
+* Paste the updated diff.
+* Select the review you want to from the *Attach To* dropdown and click
+ *Continue*.
+* Click *Save*.
+
+Reviewing code with Phabricator
+-------------------------------
+
+Phabricator allows you to add inline comments as well as overall comments
+to a revision. To add an inline comment, select the lines of code you want
+to comment on by clicking and dragging the line numbers in the diff pane.
+
+You can add overall comments or submit your comments at the bottom of the page.
+
+Phabricator has many useful features, for example allowing you to select
+diffs between different versions of the patch as it was reviewed in the
+*Revision Update History*. Most features are self descriptive - explore, and
+if you have a question, drop by on #llvm in IRC to get help.
+
+Note that as e-mail is the system of reference for code reviews, and some
+people prefer it over a web interface, we do not generate automated mail
+when a review changes state, for example by clicking "Accept Revision" in
+the web interface. Thus, please type LGTM into the comment box to accept
+a change from Phabricator.
+
+Committing a change
+-------------------
+
+Arcanist can manage the commit transparently. It will retrieve the description,
+reviewers, the ``Differential Revision``, etc from the review and commit it to the repository.
+
+::
+
+ arc patch D<Revision>
+ arc commit --revision D<Revision>
+
+
+When committing an LLVM change that has been reviewed using
+Phabricator, the convention is for the commit message to end with the
+line:
+
+::
+
+ Differential Revision: <URL>
+
+where ``<URL>`` is the URL for the code review, starting with
+``http://reviews.llvm.org/``.
+
+Note that Arcanist will add this automatically.
+
+This allows people reading the version history to see the review for
+context. This also allows Phabricator to detect the commit, close the
+review, and add a link from the review to the commit.
+
+Status
+------
+
+Please let us know whether you like it and what could be improved!
+
+.. _LLVM's Phabricator: http://reviews.llvm.org
+.. _`http://reviews.llvm.org`: http://reviews.llvm.org
+.. _Code Repository Browser: http://reviews.llvm.org/diffusion/
+.. _Arcanist Quick Start: http://www.phabricator.com/docs/phabricator/article/Arcanist_Quick_Start.html
+.. _Arcanist User Guide: http://www.phabricator.com/docs/phabricator/article/Arcanist_User_Guide.html
Added: www-releases/trunk/3.6.1/docs/_sources/ProgrammersManual.txt
URL: http://llvm.org/viewvc/llvm-project/www-releases/trunk/3.6.1/docs/_sources/ProgrammersManual.txt?rev=238135&view=auto
==============================================================================
--- www-releases/trunk/3.6.1/docs/_sources/ProgrammersManual.txt (added)
+++ www-releases/trunk/3.6.1/docs/_sources/ProgrammersManual.txt Mon May 25 08:53:02 2015
@@ -0,0 +1,3268 @@
+========================
+LLVM Programmer's Manual
+========================
+
+.. contents::
+ :local:
+
+.. warning::
+ This is always a work in progress.
+
+.. _introduction:
+
+Introduction
+============
+
+This document is meant to highlight some of the important classes and interfaces
+available in the LLVM source-base. This manual is not intended to explain what
+LLVM is, how it works, and what LLVM code looks like. It assumes that you know
+the basics of LLVM and are interested in writing transformations or otherwise
+analyzing or manipulating the code.
+
+This document should get you oriented so that you can find your way in the
+continuously growing source code that makes up the LLVM infrastructure. Note
+that this manual is not intended to serve as a replacement for reading the
+source code, so if you think there should be a method in one of these classes to
+do something, but it's not listed, check the source. Links to the `doxygen
+<http://llvm.org/doxygen/>`__ sources are provided to make this as easy as
+possible.
+
+The first section of this document describes general information that is useful
+to know when working in the LLVM infrastructure, and the second describes the
+Core LLVM classes. In the future this manual will be extended with information
+describing how to use extension libraries, such as dominator information, CFG
+traversal routines, and useful utilities like the ``InstVisitor`` (`doxygen
+<http://llvm.org/doxygen/InstVisitor_8h-source.html>`__) template.
+
+.. _general:
+
+General Information
+===================
+
+This section contains general information that is useful if you are working in
+the LLVM source-base, but that isn't specific to any particular API.
+
+.. _stl:
+
+The C++ Standard Template Library
+---------------------------------
+
+LLVM makes heavy use of the C++ Standard Template Library (STL), perhaps much
+more than you are used to, or have seen before. Because of this, you might want
+to do a little background reading in the techniques used and capabilities of the
+library. There are many good pages that discuss the STL, and several books on
+the subject that you can get, so it will not be discussed in this document.
+
+Here are some useful links:
+
+#. `cppreference.com
+ <http://en.cppreference.com/w/>`_ - an excellent
+ reference for the STL and other parts of the standard C++ library.
+
+#. `C++ In a Nutshell <http://www.tempest-sw.com/cpp/>`_ - This is an O'Reilly
+ book in the making. It has a decent Standard Library Reference that rivals
+ Dinkumware's, and is unfortunately no longer free since the book has been
+ published.
+
+#. `C++ Frequently Asked Questions <http://www.parashift.com/c++-faq-lite/>`_.
+
+#. `SGI's STL Programmer's Guide <http://www.sgi.com/tech/stl/>`_ - Contains a
+ useful `Introduction to the STL
+ <http://www.sgi.com/tech/stl/stl_introduction.html>`_.
+
+#. `Bjarne Stroustrup's C++ Page
+ <http://www.research.att.com/%7Ebs/C++.html>`_.
+
+#. `Bruce Eckel's Thinking in C++, 2nd ed. Volume 2 Revision 4.0
+ (even better, get the book)
+ <http://www.mindview.net/Books/TICPP/ThinkingInCPP2e.html>`_.
+
+You are also encouraged to take a look at the :doc:`LLVM Coding Standards
+<CodingStandards>` guide which focuses on how to write maintainable code more
+than where to put your curly braces.
+
+.. _resources:
+
+Other useful references
+-----------------------
+
+#. `Using static and shared libraries across platforms
+ <http://www.fortran-2000.com/ArnaudRecipes/sharedlib.html>`_
+
+.. _apis:
+
+Important and useful LLVM APIs
+==============================
+
+Here we highlight some LLVM APIs that are generally useful and good to know
+about when writing transformations.
+
+.. _isa:
+
+The ``isa<>``, ``cast<>`` and ``dyn_cast<>`` templates
+------------------------------------------------------
+
+The LLVM source-base makes extensive use of a custom form of RTTI. These
+templates have many similarities to the C++ ``dynamic_cast<>`` operator, but
+they don't have some drawbacks (primarily stemming from the fact that
+``dynamic_cast<>`` only works on classes that have a v-table). Because they are
+used so often, you must know what they do and how they work. All of these
+templates are defined in the ``llvm/Support/Casting.h`` (`doxygen
+<http://llvm.org/doxygen/Casting_8h-source.html>`__) file (note that you very
+rarely have to include this file directly).
+
+``isa<>``:
+ The ``isa<>`` operator works exactly like the Java "``instanceof``" operator.
+ It returns true or false depending on whether a reference or pointer points to
+ an instance of the specified class. This can be very useful for constraint
+ checking of various sorts (example below).
+
+``cast<>``:
+ The ``cast<>`` operator is a "checked cast" operation. It converts a pointer
+ or reference from a base class to a derived class, causing an assertion
+ failure if it is not really an instance of the right type. This should be
+ used in cases where you have some information that makes you believe that
+ something is of the right type. An example of the ``isa<>`` and ``cast<>``
+ template is:
+
+ .. code-block:: c++
+
+ static bool isLoopInvariant(const Value *V, const Loop *L) {
+ if (isa<Constant>(V) || isa<Argument>(V) || isa<GlobalValue>(V))
+ return true;
+
+ // Otherwise, it must be an instruction...
+ return !L->contains(cast<Instruction>(V)->getParent());
+ }
+
+ Note that you should **not** use an ``isa<>`` test followed by a ``cast<>``,
+ for that use the ``dyn_cast<>`` operator.
+
+``dyn_cast<>``:
+ The ``dyn_cast<>`` operator is a "checking cast" operation. It checks to see
+ if the operand is of the specified type, and if so, returns a pointer to it
+ (this operator does not work with references). If the operand is not of the
+ correct type, a null pointer is returned. Thus, this works very much like
+ the ``dynamic_cast<>`` operator in C++, and should be used in the same
+ circumstances. Typically, the ``dyn_cast<>`` operator is used in an ``if``
+ statement or some other flow control statement like this:
+
+ .. code-block:: c++
+
+ if (AllocationInst *AI = dyn_cast<AllocationInst>(Val)) {
+ // ...
+ }
+
+ This form of the ``if`` statement effectively combines together a call to
+ ``isa<>`` and a call to ``cast<>`` into one statement, which is very
+ convenient.
+
+ Note that the ``dyn_cast<>`` operator, like C++'s ``dynamic_cast<>`` or Java's
+ ``instanceof`` operator, can be abused. In particular, you should not use big
+ chained ``if/then/else`` blocks to check for lots of different variants of
+ classes. If you find yourself wanting to do this, it is much cleaner and more
+ efficient to use the ``InstVisitor`` class to dispatch over the instruction
+ type directly.
+
+``cast_or_null<>``:
+ The ``cast_or_null<>`` operator works just like the ``cast<>`` operator,
+ except that it allows for a null pointer as an argument (which it then
+ propagates). This can sometimes be useful, allowing you to combine several
+ null checks into one.
+
+``dyn_cast_or_null<>``:
+ The ``dyn_cast_or_null<>`` operator works just like the ``dyn_cast<>``
+ operator, except that it allows for a null pointer as an argument (which it
+ then propagates). This can sometimes be useful, allowing you to combine
+ several null checks into one.
+
+These five templates can be used with any classes, whether they have a v-table
+or not. If you want to add support for these templates, see the document
+:doc:`How to set up LLVM-style RTTI for your class hierarchy
+<HowToSetUpLLVMStyleRTTI>`
+
+.. _string_apis:
+
+Passing strings (the ``StringRef`` and ``Twine`` classes)
+---------------------------------------------------------
+
+Although LLVM generally does not do much string manipulation, we do have several
+important APIs which take strings. Two important examples are the Value class
+-- which has names for instructions, functions, etc. -- and the ``StringMap``
+class which is used extensively in LLVM and Clang.
+
+These are generic classes, and they need to be able to accept strings which may
+have embedded null characters. Therefore, they cannot simply take a ``const
+char *``, and taking a ``const std::string&`` requires clients to perform a heap
+allocation which is usually unnecessary. Instead, many LLVM APIs use a
+``StringRef`` or a ``const Twine&`` for passing strings efficiently.
+
+.. _StringRef:
+
+The ``StringRef`` class
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The ``StringRef`` data type represents a reference to a constant string (a
+character array and a length) and supports the common operations available on
+``std::string``, but does not require heap allocation.
+
+It can be implicitly constructed using a C style null-terminated string, an
+``std::string``, or explicitly with a character pointer and length. For
+example, the ``StringRef`` find function is declared as:
+
+.. code-block:: c++
+
+ iterator find(StringRef Key);
+
+and clients can call it using any one of:
+
+.. code-block:: c++
+
+ Map.find("foo"); // Lookup "foo"
+ Map.find(std::string("bar")); // Lookup "bar"
+ Map.find(StringRef("\0baz", 4)); // Lookup "\0baz"
+
+Similarly, APIs which need to return a string may return a ``StringRef``
+instance, which can be used directly or converted to an ``std::string`` using
+the ``str`` member function. See ``llvm/ADT/StringRef.h`` (`doxygen
+<http://llvm.org/doxygen/classllvm_1_1StringRef_8h-source.html>`__) for more
+information.
+
+You should rarely use the ``StringRef`` class directly, because it contains
+pointers to external memory it is not generally safe to store an instance of the
+class (unless you know that the external storage will not be freed).
+``StringRef`` is small and pervasive enough in LLVM that it should always be
+passed by value.
+
+The ``Twine`` class
+^^^^^^^^^^^^^^^^^^^
+
+The ``Twine`` (`doxygen <http://llvm.org/doxygen/classllvm_1_1Twine.html>`__)
+class is an efficient way for APIs to accept concatenated strings. For example,
+a common LLVM paradigm is to name one instruction based on the name of another
+instruction with a suffix, for example:
+
+.. code-block:: c++
+
+ New = CmpInst::Create(..., SO->getName() + ".cmp");
+
+The ``Twine`` class is effectively a lightweight `rope
+<http://en.wikipedia.org/wiki/Rope_(computer_science)>`_ which points to
+temporary (stack allocated) objects. Twines can be implicitly constructed as
+the result of the plus operator applied to strings (i.e., a C strings, an
+``std::string``, or a ``StringRef``). The twine delays the actual concatenation
+of strings until it is actually required, at which point it can be efficiently
+rendered directly into a character array. This avoids unnecessary heap
+allocation involved in constructing the temporary results of string
+concatenation. See ``llvm/ADT/Twine.h`` (`doxygen
+<http://llvm.org/doxygen/Twine_8h_source.html>`__) and :ref:`here <dss_twine>`
+for more information.
+
+As with a ``StringRef``, ``Twine`` objects point to external memory and should
+almost never be stored or mentioned directly. They are intended solely for use
+when defining a function which should be able to efficiently accept concatenated
+strings.
+
+.. _function_apis:
+
+Passing functions and other callable objects
+--------------------------------------------
+
+Sometimes you may want a function to be passed a callback object. In order to
+support lambda expressions and other function objects, you should not use the
+traditional C approach of taking a function pointer and an opaque cookie:
+
+.. code-block:: c++
+
+ void takeCallback(bool (*Callback)(Function *, void *), void *Cookie);
+
+Instead, use one of the following approaches:
+
+Function template
+^^^^^^^^^^^^^^^^^
+
+If you don't mind putting the definition of your function into a header file,
+make it a function template that is templated on the callable type.
+
+.. code-block:: c++
+
+ template<typename Callable>
+ void takeCallback(Callable Callback) {
+ Callback(1, 2, 3);
+ }
+
+The ``function_ref`` class template
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The ``function_ref``
+(`doxygen <http://llvm.org/doxygen/classllvm_1_1function_ref.html>`__) class
+template represents a reference to a callable object, templated over the type
+of the callable. This is a good choice for passing a callback to a function,
+if you don't need to hold onto the callback after the function returns. In this
+way, ``function_ref`` is to ``std::function`` as ``StringRef`` is to
+``std::string``.
+
+``function_ref<Ret(Param1, Param2, ...)>`` can be implicitly constructed from
+any callable object that can be called with arguments of type ``Param1``,
+``Param2``, ..., and returns a value that can be converted to type ``Ret``.
+For example:
+
+.. code-block:: c++
+
+ void visitBasicBlocks(Function *F, function_ref<bool (BasicBlock*)> Callback) {
+ for (BasicBlock &BB : *F)
+ if (Callback(&BB))
+ return;
+ }
+
+can be called using:
+
+.. code-block:: c++
+
+ visitBasicBlocks(F, [&](BasicBlock *BB) {
+ if (process(BB))
+ return isEmpty(BB);
+ return false;
+ });
+
+Note that a ``function_ref`` object contains pointers to external memory, so it
+is not generally safe to store an instance of the class (unless you know that
+the external storage will not be freed). If you need this ability, consider
+using ``std::function``. ``function_ref`` is small enough that it should always
+be passed by value.
+
+.. _DEBUG:
+
+The ``DEBUG()`` macro and ``-debug`` option
+-------------------------------------------
+
+Often when working on your pass you will put a bunch of debugging printouts and
+other code into your pass. After you get it working, you want to remove it, but
+you may need it again in the future (to work out new bugs that you run across).
+
+Naturally, because of this, you don't want to delete the debug printouts, but
+you don't want them to always be noisy. A standard compromise is to comment
+them out, allowing you to enable them if you need them in the future.
+
+The ``llvm/Support/Debug.h`` (`doxygen
+<http://llvm.org/doxygen/Debug_8h-source.html>`__) file provides a macro named
+``DEBUG()`` that is a much nicer solution to this problem. Basically, you can
+put arbitrary code into the argument of the ``DEBUG`` macro, and it is only
+executed if '``opt``' (or any other tool) is run with the '``-debug``' command
+line argument:
+
+.. code-block:: c++
+
+ DEBUG(errs() << "I am here!\n");
+
+Then you can run your pass like this:
+
+.. code-block:: none
+
+ $ opt < a.bc > /dev/null -mypass
+ <no output>
+ $ opt < a.bc > /dev/null -mypass -debug
+ I am here!
+
+Using the ``DEBUG()`` macro instead of a home-brewed solution allows you to not
+have to create "yet another" command line option for the debug output for your
+pass. Note that ``DEBUG()`` macros are disabled for optimized builds, so they
+do not cause a performance impact at all (for the same reason, they should also
+not contain side-effects!).
+
+One additional nice thing about the ``DEBUG()`` macro is that you can enable or
+disable it directly in gdb. Just use "``set DebugFlag=0``" or "``set
+DebugFlag=1``" from the gdb if the program is running. If the program hasn't
+been started yet, you can always just run it with ``-debug``.
+
+.. _DEBUG_TYPE:
+
+Fine grained debug info with ``DEBUG_TYPE`` and the ``-debug-only`` option
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Sometimes you may find yourself in a situation where enabling ``-debug`` just
+turns on **too much** information (such as when working on the code generator).
+If you want to enable debug information with more fine-grained control, you
+can define the ``DEBUG_TYPE`` macro and use the ``-debug-only`` option as
+follows:
+
+.. code-block:: c++
+
+ #undef DEBUG_TYPE
+ DEBUG(errs() << "No debug type\n");
+ #define DEBUG_TYPE "foo"
+ DEBUG(errs() << "'foo' debug type\n");
+ #undef DEBUG_TYPE
+ #define DEBUG_TYPE "bar"
+ DEBUG(errs() << "'bar' debug type\n"));
+ #undef DEBUG_TYPE
+ #define DEBUG_TYPE ""
+ DEBUG(errs() << "No debug type (2)\n");
+
+Then you can run your pass like this:
+
+.. code-block:: none
+
+ $ opt < a.bc > /dev/null -mypass
+ <no output>
+ $ opt < a.bc > /dev/null -mypass -debug
+ No debug type
+ 'foo' debug type
+ 'bar' debug type
+ No debug type (2)
+ $ opt < a.bc > /dev/null -mypass -debug-only=foo
+ 'foo' debug type
+ $ opt < a.bc > /dev/null -mypass -debug-only=bar
+ 'bar' debug type
+
+Of course, in practice, you should only set ``DEBUG_TYPE`` at the top of a file,
+to specify the debug type for the entire module (if you do this before you
+``#include "llvm/Support/Debug.h"``, you don't have to insert the ugly
+``#undef``'s). Also, you should use names more meaningful than "foo" and "bar",
+because there is no system in place to ensure that names do not conflict. If
+two different modules use the same string, they will all be turned on when the
+name is specified. This allows, for example, all debug information for
+instruction scheduling to be enabled with ``-debug-only=InstrSched``, even if
+the source lives in multiple files.
+
+For performance reasons, -debug-only is not available in optimized build
+(``--enable-optimized``) of LLVM.
+
+The ``DEBUG_WITH_TYPE`` macro is also available for situations where you would
+like to set ``DEBUG_TYPE``, but only for one specific ``DEBUG`` statement. It
+takes an additional first parameter, which is the type to use. For example, the
+preceding example could be written as:
+
+.. code-block:: c++
+
+ DEBUG_WITH_TYPE("", errs() << "No debug type\n");
+ DEBUG_WITH_TYPE("foo", errs() << "'foo' debug type\n");
+ DEBUG_WITH_TYPE("bar", errs() << "'bar' debug type\n"));
+ DEBUG_WITH_TYPE("", errs() << "No debug type (2)\n");
+
+.. _Statistic:
+
+The ``Statistic`` class & ``-stats`` option
+-------------------------------------------
+
+The ``llvm/ADT/Statistic.h`` (`doxygen
+<http://llvm.org/doxygen/Statistic_8h-source.html>`__) file provides a class
+named ``Statistic`` that is used as a unified way to keep track of what the LLVM
+compiler is doing and how effective various optimizations are. It is useful to
+see what optimizations are contributing to making a particular program run
+faster.
+
+Often you may run your pass on some big program, and you're interested to see
+how many times it makes a certain transformation. Although you can do this with
+hand inspection, or some ad-hoc method, this is a real pain and not very useful
+for big programs. Using the ``Statistic`` class makes it very easy to keep
+track of this information, and the calculated information is presented in a
+uniform manner with the rest of the passes being executed.
+
+There are many examples of ``Statistic`` uses, but the basics of using it are as
+follows:
+
+#. Define your statistic like this:
+
+ .. code-block:: c++
+
+ #define DEBUG_TYPE "mypassname" // This goes before any #includes.
+ STATISTIC(NumXForms, "The # of times I did stuff");
+
+ The ``STATISTIC`` macro defines a static variable, whose name is specified by
+ the first argument. The pass name is taken from the ``DEBUG_TYPE`` macro, and
+ the description is taken from the second argument. The variable defined
+ ("NumXForms" in this case) acts like an unsigned integer.
+
+#. Whenever you make a transformation, bump the counter:
+
+ .. code-block:: c++
+
+ ++NumXForms; // I did stuff!
+
+That's all you have to do. To get '``opt``' to print out the statistics
+gathered, use the '``-stats``' option:
+
+.. code-block:: none
+
+ $ opt -stats -mypassname < program.bc > /dev/null
+ ... statistics output ...
+
+When running ``opt`` on a C file from the SPEC benchmark suite, it gives a
+report that looks like this:
+
+.. code-block:: none
+
+ 7646 bitcodewriter - Number of normal instructions
+ 725 bitcodewriter - Number of oversized instructions
+ 129996 bitcodewriter - Number of bitcode bytes written
+ 2817 raise - Number of insts DCEd or constprop'd
+ 3213 raise - Number of cast-of-self removed
+ 5046 raise - Number of expression trees converted
+ 75 raise - Number of other getelementptr's formed
+ 138 raise - Number of load/store peepholes
+ 42 deadtypeelim - Number of unused typenames removed from symtab
+ 392 funcresolve - Number of varargs functions resolved
+ 27 globaldce - Number of global variables removed
+ 2 adce - Number of basic blocks removed
+ 134 cee - Number of branches revectored
+ 49 cee - Number of setcc instruction eliminated
+ 532 gcse - Number of loads removed
+ 2919 gcse - Number of instructions removed
+ 86 indvars - Number of canonical indvars added
+ 87 indvars - Number of aux indvars removed
+ 25 instcombine - Number of dead inst eliminate
+ 434 instcombine - Number of insts combined
+ 248 licm - Number of load insts hoisted
+ 1298 licm - Number of insts hoisted to a loop pre-header
+ 3 licm - Number of insts hoisted to multiple loop preds (bad, no loop pre-header)
+ 75 mem2reg - Number of alloca's promoted
+ 1444 cfgsimplify - Number of blocks simplified
+
+Obviously, with so many optimizations, having a unified framework for this stuff
+is very nice. Making your pass fit well into the framework makes it more
+maintainable and useful.
+
+.. _ViewGraph:
+
+Viewing graphs while debugging code
+-----------------------------------
+
+Several of the important data structures in LLVM are graphs: for example CFGs
+made out of LLVM :ref:`BasicBlocks <BasicBlock>`, CFGs made out of LLVM
+:ref:`MachineBasicBlocks <MachineBasicBlock>`, and :ref:`Instruction Selection
+DAGs <SelectionDAG>`. In many cases, while debugging various parts of the
+compiler, it is nice to instantly visualize these graphs.
+
+LLVM provides several callbacks that are available in a debug build to do
+exactly that. If you call the ``Function::viewCFG()`` method, for example, the
+current LLVM tool will pop up a window containing the CFG for the function where
+each basic block is a node in the graph, and each node contains the instructions
+in the block. Similarly, there also exists ``Function::viewCFGOnly()`` (does
+not include the instructions), the ``MachineFunction::viewCFG()`` and
+``MachineFunction::viewCFGOnly()``, and the ``SelectionDAG::viewGraph()``
+methods. Within GDB, for example, you can usually use something like ``call
+DAG.viewGraph()`` to pop up a window. Alternatively, you can sprinkle calls to
+these functions in your code in places you want to debug.
+
+Getting this to work requires a small amount of setup. On Unix systems
+with X11, install the `graphviz <http://www.graphviz.org>`_ toolkit, and make
+sure 'dot' and 'gv' are in your path. If you are running on Mac OS X, download
+and install the Mac OS X `Graphviz program
+<http://www.pixelglow.com/graphviz/>`_ and add
+``/Applications/Graphviz.app/Contents/MacOS/`` (or wherever you install it) to
+your path. The programs need not be present when configuring, building or
+running LLVM and can simply be installed when needed during an active debug
+session.
+
+``SelectionDAG`` has been extended to make it easier to locate *interesting*
+nodes in large complex graphs. From gdb, if you ``call DAG.setGraphColor(node,
+"color")``, then the next ``call DAG.viewGraph()`` would highlight the node in
+the specified color (choices of colors can be found at `colors
+<http://www.graphviz.org/doc/info/colors.html>`_.) More complex node attributes
+can be provided with ``call DAG.setGraphAttrs(node, "attributes")`` (choices can
+be found at `Graph attributes <http://www.graphviz.org/doc/info/attrs.html>`_.)
+If you want to restart and clear all the current graph attributes, then you can
+``call DAG.clearGraphAttrs()``.
+
+Note that graph visualization features are compiled out of Release builds to
+reduce file size. This means that you need a Debug+Asserts or Release+Asserts
+build to use these features.
+
+.. _datastructure:
+
+Picking the Right Data Structure for a Task
+===========================================
+
+LLVM has a plethora of data structures in the ``llvm/ADT/`` directory, and we
+commonly use STL data structures. This section describes the trade-offs you
+should consider when you pick one.
+
+The first step is a choose your own adventure: do you want a sequential
+container, a set-like container, or a map-like container? The most important
+thing when choosing a container is the algorithmic properties of how you plan to
+access the container. Based on that, you should use:
+
+
+* a :ref:`map-like <ds_map>` container if you need efficient look-up of a
+ value based on another value. Map-like containers also support efficient
+ queries for containment (whether a key is in the map). Map-like containers
+ generally do not support efficient reverse mapping (values to keys). If you
+ need that, use two maps. Some map-like containers also support efficient
+ iteration through the keys in sorted order. Map-like containers are the most
+ expensive sort, only use them if you need one of these capabilities.
+
+* a :ref:`set-like <ds_set>` container if you need to put a bunch of stuff into
+ a container that automatically eliminates duplicates. Some set-like
+ containers support efficient iteration through the elements in sorted order.
+ Set-like containers are more expensive than sequential containers.
+
+* a :ref:`sequential <ds_sequential>` container provides the most efficient way
+ to add elements and keeps track of the order they are added to the collection.
+ They permit duplicates and support efficient iteration, but do not support
+ efficient look-up based on a key.
+
+* a :ref:`string <ds_string>` container is a specialized sequential container or
+ reference structure that is used for character or byte arrays.
+
+* a :ref:`bit <ds_bit>` container provides an efficient way to store and
+ perform set operations on sets of numeric id's, while automatically
+ eliminating duplicates. Bit containers require a maximum of 1 bit for each
+ identifier you want to store.
+
+Once the proper category of container is determined, you can fine tune the
+memory use, constant factors, and cache behaviors of access by intelligently
+picking a member of the category. Note that constant factors and cache behavior
+can be a big deal. If you have a vector that usually only contains a few
+elements (but could contain many), for example, it's much better to use
+:ref:`SmallVector <dss_smallvector>` than :ref:`vector <dss_vector>`. Doing so
+avoids (relatively) expensive malloc/free calls, which dwarf the cost of adding
+the elements to the container.
+
+.. _ds_sequential:
+
+Sequential Containers (std::vector, std::list, etc)
+---------------------------------------------------
+
+There are a variety of sequential containers available for you, based on your
+needs. Pick the first in this section that will do what you want.
+
+.. _dss_arrayref:
+
+llvm/ADT/ArrayRef.h
+^^^^^^^^^^^^^^^^^^^
+
+The ``llvm::ArrayRef`` class is the preferred class to use in an interface that
+accepts a sequential list of elements in memory and just reads from them. By
+taking an ``ArrayRef``, the API can be passed a fixed size array, an
+``std::vector``, an ``llvm::SmallVector`` and anything else that is contiguous
+in memory.
+
+.. _dss_fixedarrays:
+
+Fixed Size Arrays
+^^^^^^^^^^^^^^^^^
+
+Fixed size arrays are very simple and very fast. They are good if you know
+exactly how many elements you have, or you have a (low) upper bound on how many
+you have.
+
+.. _dss_heaparrays:
+
+Heap Allocated Arrays
+^^^^^^^^^^^^^^^^^^^^^
+
+Heap allocated arrays (``new[]`` + ``delete[]``) are also simple. They are good
+if the number of elements is variable, if you know how many elements you will
+need before the array is allocated, and if the array is usually large (if not,
+consider a :ref:`SmallVector <dss_smallvector>`). The cost of a heap allocated
+array is the cost of the new/delete (aka malloc/free). Also note that if you
+are allocating an array of a type with a constructor, the constructor and
+destructors will be run for every element in the array (re-sizable vectors only
+construct those elements actually used).
+
+.. _dss_tinyptrvector:
+
+llvm/ADT/TinyPtrVector.h
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+``TinyPtrVector<Type>`` is a highly specialized collection class that is
+optimized to avoid allocation in the case when a vector has zero or one
+elements. It has two major restrictions: 1) it can only hold values of pointer
+type, and 2) it cannot hold a null pointer.
+
+Since this container is highly specialized, it is rarely used.
+
+.. _dss_smallvector:
+
+llvm/ADT/SmallVector.h
+^^^^^^^^^^^^^^^^^^^^^^
+
+``SmallVector<Type, N>`` is a simple class that looks and smells just like
+``vector<Type>``: it supports efficient iteration, lays out elements in memory
+order (so you can do pointer arithmetic between elements), supports efficient
+push_back/pop_back operations, supports efficient random access to its elements,
+etc.
+
+The advantage of SmallVector is that it allocates space for some number of
+elements (N) **in the object itself**. Because of this, if the SmallVector is
+dynamically smaller than N, no malloc is performed. This can be a big win in
+cases where the malloc/free call is far more expensive than the code that
+fiddles around with the elements.
+
+This is good for vectors that are "usually small" (e.g. the number of
+predecessors/successors of a block is usually less than 8). On the other hand,
+this makes the size of the SmallVector itself large, so you don't want to
+allocate lots of them (doing so will waste a lot of space). As such,
+SmallVectors are most useful when on the stack.
+
+SmallVector also provides a nice portable and efficient replacement for
+``alloca``.
+
+.. note::
+
+ Prefer to use ``SmallVectorImpl<T>`` as a parameter type.
+
+ In APIs that don't care about the "small size" (most?), prefer to use
+ the ``SmallVectorImpl<T>`` class, which is basically just the "vector
+ header" (and methods) without the elements allocated after it. Note that
+ ``SmallVector<T, N>`` inherits from ``SmallVectorImpl<T>`` so the
+ conversion is implicit and costs nothing. E.g.
+
+ .. code-block:: c++
+
+ // BAD: Clients cannot pass e.g. SmallVector<Foo, 4>.
+ hardcodedSmallSize(SmallVector<Foo, 2> &Out);
+ // GOOD: Clients can pass any SmallVector<Foo, N>.
+ allowsAnySmallSize(SmallVectorImpl<Foo> &Out);
+
+ void someFunc() {
+ SmallVector<Foo, 8> Vec;
+ hardcodedSmallSize(Vec); // Error.
+ allowsAnySmallSize(Vec); // Works.
+ }
+
+ Even though it has "``Impl``" in the name, this is so widely used that
+ it really isn't "private to the implementation" anymore. A name like
+ ``SmallVectorHeader`` would be more appropriate.
+
+.. _dss_vector:
+
+<vector>
+^^^^^^^^
+
+``std::vector`` is well loved and respected. It is useful when SmallVector
+isn't: when the size of the vector is often large (thus the small optimization
+will rarely be a benefit) or if you will be allocating many instances of the
+vector itself (which would waste space for elements that aren't in the
+container). vector is also useful when interfacing with code that expects
+vectors :).
+
+One worthwhile note about std::vector: avoid code like this:
+
+.. code-block:: c++
+
+ for ( ... ) {
+ std::vector<foo> V;
+ // make use of V.
+ }
+
+Instead, write this as:
+
+.. code-block:: c++
+
+ std::vector<foo> V;
+ for ( ... ) {
+ // make use of V.
+ V.clear();
+ }
+
+Doing so will save (at least) one heap allocation and free per iteration of the
+loop.
+
+.. _dss_deque:
+
+<deque>
+^^^^^^^
+
+``std::deque`` is, in some senses, a generalized version of ``std::vector``.
+Like ``std::vector``, it provides constant time random access and other similar
+properties, but it also provides efficient access to the front of the list. It
+does not guarantee continuity of elements within memory.
+
+In exchange for this extra flexibility, ``std::deque`` has significantly higher
+constant factor costs than ``std::vector``. If possible, use ``std::vector`` or
+something cheaper.
+
+.. _dss_list:
+
+<list>
+^^^^^^
+
+``std::list`` is an extremely inefficient class that is rarely useful. It
+performs a heap allocation for every element inserted into it, thus having an
+extremely high constant factor, particularly for small data types.
+``std::list`` also only supports bidirectional iteration, not random access
+iteration.
+
+In exchange for this high cost, std::list supports efficient access to both ends
+of the list (like ``std::deque``, but unlike ``std::vector`` or
+``SmallVector``). In addition, the iterator invalidation characteristics of
+std::list are stronger than that of a vector class: inserting or removing an
+element into the list does not invalidate iterator or pointers to other elements
+in the list.
+
+.. _dss_ilist:
+
+llvm/ADT/ilist.h
+^^^^^^^^^^^^^^^^
+
+``ilist<T>`` implements an 'intrusive' doubly-linked list. It is intrusive,
+because it requires the element to store and provide access to the prev/next
+pointers for the list.
+
+``ilist`` has the same drawbacks as ``std::list``, and additionally requires an
+``ilist_traits`` implementation for the element type, but it provides some novel
+characteristics. In particular, it can efficiently store polymorphic objects,
+the traits class is informed when an element is inserted or removed from the
+list, and ``ilist``\ s are guaranteed to support a constant-time splice
+operation.
+
+These properties are exactly what we want for things like ``Instruction``\ s and
+basic blocks, which is why these are implemented with ``ilist``\ s.
+
+Related classes of interest are explained in the following subsections:
+
+* :ref:`ilist_traits <dss_ilist_traits>`
+
+* :ref:`iplist <dss_iplist>`
+
+* :ref:`llvm/ADT/ilist_node.h <dss_ilist_node>`
+
+* :ref:`Sentinels <dss_ilist_sentinel>`
+
+.. _dss_packedvector:
+
+llvm/ADT/PackedVector.h
+^^^^^^^^^^^^^^^^^^^^^^^
+
+Useful for storing a vector of values using only a few number of bits for each
+value. Apart from the standard operations of a vector-like container, it can
+also perform an 'or' set operation.
+
+For example:
+
+.. code-block:: c++
+
+ enum State {
+ None = 0x0,
+ FirstCondition = 0x1,
+ SecondCondition = 0x2,
+ Both = 0x3
+ };
+
+ State get() {
+ PackedVector<State, 2> Vec1;
+ Vec1.push_back(FirstCondition);
+
+ PackedVector<State, 2> Vec2;
+ Vec2.push_back(SecondCondition);
+
+ Vec1 |= Vec2;
+ return Vec1[0]; // returns 'Both'.
+ }
+
+.. _dss_ilist_traits:
+
+ilist_traits
+^^^^^^^^^^^^
+
+``ilist_traits<T>`` is ``ilist<T>``'s customization mechanism. ``iplist<T>``
+(and consequently ``ilist<T>``) publicly derive from this traits class.
+
+.. _dss_iplist:
+
+iplist
+^^^^^^
+
+``iplist<T>`` is ``ilist<T>``'s base and as such supports a slightly narrower
+interface. Notably, inserters from ``T&`` are absent.
+
+``ilist_traits<T>`` is a public base of this class and can be used for a wide
+variety of customizations.
+
+.. _dss_ilist_node:
+
+llvm/ADT/ilist_node.h
+^^^^^^^^^^^^^^^^^^^^^
+
+``ilist_node<T>`` implements the forward and backward links that are expected
+by the ``ilist<T>`` (and analogous containers) in the default manner.
+
+``ilist_node<T>``\ s are meant to be embedded in the node type ``T``, usually
+``T`` publicly derives from ``ilist_node<T>``.
+
+.. _dss_ilist_sentinel:
+
+Sentinels
+^^^^^^^^^
+
+``ilist``\ s have another specialty that must be considered. To be a good
+citizen in the C++ ecosystem, it needs to support the standard container
+operations, such as ``begin`` and ``end`` iterators, etc. Also, the
+``operator--`` must work correctly on the ``end`` iterator in the case of
+non-empty ``ilist``\ s.
+
+The only sensible solution to this problem is to allocate a so-called *sentinel*
+along with the intrusive list, which serves as the ``end`` iterator, providing
+the back-link to the last element. However conforming to the C++ convention it
+is illegal to ``operator++`` beyond the sentinel and it also must not be
+dereferenced.
+
+These constraints allow for some implementation freedom to the ``ilist`` how to
+allocate and store the sentinel. The corresponding policy is dictated by
+``ilist_traits<T>``. By default a ``T`` gets heap-allocated whenever the need
+for a sentinel arises.
+
+While the default policy is sufficient in most cases, it may break down when
+``T`` does not provide a default constructor. Also, in the case of many
+instances of ``ilist``\ s, the memory overhead of the associated sentinels is
+wasted. To alleviate the situation with numerous and voluminous
+``T``-sentinels, sometimes a trick is employed, leading to *ghostly sentinels*.
+
+Ghostly sentinels are obtained by specially-crafted ``ilist_traits<T>`` which
+superpose the sentinel with the ``ilist`` instance in memory. Pointer
+arithmetic is used to obtain the sentinel, which is relative to the ``ilist``'s
+``this`` pointer. The ``ilist`` is augmented by an extra pointer, which serves
+as the back-link of the sentinel. This is the only field in the ghostly
+sentinel which can be legally accessed.
+
+.. _dss_other:
+
+Other Sequential Container options
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Other STL containers are available, such as ``std::string``.
+
+There are also various STL adapter classes such as ``std::queue``,
+``std::priority_queue``, ``std::stack``, etc. These provide simplified access
+to an underlying container but don't affect the cost of the container itself.
+
+.. _ds_string:
+
+String-like containers
+----------------------
+
+There are a variety of ways to pass around and use strings in C and C++, and
+LLVM adds a few new options to choose from. Pick the first option on this list
+that will do what you need, they are ordered according to their relative cost.
+
+Note that is is generally preferred to *not* pass strings around as ``const
+char*``'s. These have a number of problems, including the fact that they
+cannot represent embedded nul ("\0") characters, and do not have a length
+available efficiently. The general replacement for '``const char*``' is
+StringRef.
+
+For more information on choosing string containers for APIs, please see
+:ref:`Passing Strings <string_apis>`.
+
+.. _dss_stringref:
+
+llvm/ADT/StringRef.h
+^^^^^^^^^^^^^^^^^^^^
+
+The StringRef class is a simple value class that contains a pointer to a
+character and a length, and is quite related to the :ref:`ArrayRef
+<dss_arrayref>` class (but specialized for arrays of characters). Because
+StringRef carries a length with it, it safely handles strings with embedded nul
+characters in it, getting the length does not require a strlen call, and it even
+has very convenient APIs for slicing and dicing the character range that it
+represents.
+
+StringRef is ideal for passing simple strings around that are known to be live,
+either because they are C string literals, std::string, a C array, or a
+SmallVector. Each of these cases has an efficient implicit conversion to
+StringRef, which doesn't result in a dynamic strlen being executed.
+
+StringRef has a few major limitations which make more powerful string containers
+useful:
+
+#. You cannot directly convert a StringRef to a 'const char*' because there is
+ no way to add a trailing nul (unlike the .c_str() method on various stronger
+ classes).
+
+#. StringRef doesn't own or keep alive the underlying string bytes.
+ As such it can easily lead to dangling pointers, and is not suitable for
+ embedding in datastructures in most cases (instead, use an std::string or
+ something like that).
+
+#. For the same reason, StringRef cannot be used as the return value of a
+ method if the method "computes" the result string. Instead, use std::string.
+
+#. StringRef's do not allow you to mutate the pointed-to string bytes and it
+ doesn't allow you to insert or remove bytes from the range. For editing
+ operations like this, it interoperates with the :ref:`Twine <dss_twine>`
+ class.
+
+Because of its strengths and limitations, it is very common for a function to
+take a StringRef and for a method on an object to return a StringRef that points
+into some string that it owns.
+
+.. _dss_twine:
+
+llvm/ADT/Twine.h
+^^^^^^^^^^^^^^^^
+
+The Twine class is used as an intermediary datatype for APIs that want to take a
+string that can be constructed inline with a series of concatenations. Twine
+works by forming recursive instances of the Twine datatype (a simple value
+object) on the stack as temporary objects, linking them together into a tree
+which is then linearized when the Twine is consumed. Twine is only safe to use
+as the argument to a function, and should always be a const reference, e.g.:
+
+.. code-block:: c++
+
+ void foo(const Twine &T);
+ ...
+ StringRef X = ...
+ unsigned i = ...
+ foo(X + "." + Twine(i));
+
+This example forms a string like "blarg.42" by concatenating the values
+together, and does not form intermediate strings containing "blarg" or "blarg.".
+
+Because Twine is constructed with temporary objects on the stack, and because
+these instances are destroyed at the end of the current statement, it is an
+inherently dangerous API. For example, this simple variant contains undefined
+behavior and will probably crash:
+
+.. code-block:: c++
+
+ void foo(const Twine &T);
+ ...
+ StringRef X = ...
+ unsigned i = ...
+ const Twine &Tmp = X + "." + Twine(i);
+ foo(Tmp);
+
+... because the temporaries are destroyed before the call. That said, Twine's
+are much more efficient than intermediate std::string temporaries, and they work
+really well with StringRef. Just be aware of their limitations.
+
+.. _dss_smallstring:
+
+llvm/ADT/SmallString.h
+^^^^^^^^^^^^^^^^^^^^^^
+
+SmallString is a subclass of :ref:`SmallVector <dss_smallvector>` that adds some
+convenience APIs like += that takes StringRef's. SmallString avoids allocating
+memory in the case when the preallocated space is enough to hold its data, and
+it calls back to general heap allocation when required. Since it owns its data,
+it is very safe to use and supports full mutation of the string.
+
+Like SmallVector's, the big downside to SmallString is their sizeof. While they
+are optimized for small strings, they themselves are not particularly small.
+This means that they work great for temporary scratch buffers on the stack, but
+should not generally be put into the heap: it is very rare to see a SmallString
+as the member of a frequently-allocated heap data structure or returned
+by-value.
+
+.. _dss_stdstring:
+
+std::string
+^^^^^^^^^^^
+
+The standard C++ std::string class is a very general class that (like
+SmallString) owns its underlying data. sizeof(std::string) is very reasonable
+so it can be embedded into heap data structures and returned by-value. On the
+other hand, std::string is highly inefficient for inline editing (e.g.
+concatenating a bunch of stuff together) and because it is provided by the
+standard library, its performance characteristics depend a lot of the host
+standard library (e.g. libc++ and MSVC provide a highly optimized string class,
+GCC contains a really slow implementation).
+
+The major disadvantage of std::string is that almost every operation that makes
+them larger can allocate memory, which is slow. As such, it is better to use
+SmallVector or Twine as a scratch buffer, but then use std::string to persist
+the result.
+
+.. _ds_set:
+
+Set-Like Containers (std::set, SmallSet, SetVector, etc)
+--------------------------------------------------------
+
+Set-like containers are useful when you need to canonicalize multiple values
+into a single representation. There are several different choices for how to do
+this, providing various trade-offs.
+
+.. _dss_sortedvectorset:
+
+A sorted 'vector'
+^^^^^^^^^^^^^^^^^
+
+If you intend to insert a lot of elements, then do a lot of queries, a great
+approach is to use a vector (or other sequential container) with
+std::sort+std::unique to remove duplicates. This approach works really well if
+your usage pattern has these two distinct phases (insert then query), and can be
+coupled with a good choice of :ref:`sequential container <ds_sequential>`.
+
+This combination provides the several nice properties: the result data is
+contiguous in memory (good for cache locality), has few allocations, is easy to
+address (iterators in the final vector are just indices or pointers), and can be
+efficiently queried with a standard binary search (e.g.
+``std::lower_bound``; if you want the whole range of elements comparing
+equal, use ``std::equal_range``).
+
+.. _dss_smallset:
+
+llvm/ADT/SmallSet.h
+^^^^^^^^^^^^^^^^^^^
+
+If you have a set-like data structure that is usually small and whose elements
+are reasonably small, a ``SmallSet<Type, N>`` is a good choice. This set has
+space for N elements in place (thus, if the set is dynamically smaller than N,
+no malloc traffic is required) and accesses them with a simple linear search.
+When the set grows beyond 'N' elements, it allocates a more expensive
+representation that guarantees efficient access (for most types, it falls back
+to std::set, but for pointers it uses something far better, :ref:`SmallPtrSet
+<dss_smallptrset>`.
+
+The magic of this class is that it handles small sets extremely efficiently, but
+gracefully handles extremely large sets without loss of efficiency. The
+drawback is that the interface is quite small: it supports insertion, queries
+and erasing, but does not support iteration.
+
+.. _dss_smallptrset:
+
+llvm/ADT/SmallPtrSet.h
+^^^^^^^^^^^^^^^^^^^^^^
+
+SmallPtrSet has all the advantages of ``SmallSet`` (and a ``SmallSet`` of
+pointers is transparently implemented with a ``SmallPtrSet``), but also supports
+iterators. If more than 'N' insertions are performed, a single quadratically
+probed hash table is allocated and grows as needed, providing extremely
+efficient access (constant time insertion/deleting/queries with low constant
+factors) and is very stingy with malloc traffic.
+
+Note that, unlike ``std::set``, the iterators of ``SmallPtrSet`` are invalidated
+whenever an insertion occurs. Also, the values visited by the iterators are not
+visited in sorted order.
+
+.. _dss_denseset:
+
+llvm/ADT/DenseSet.h
+^^^^^^^^^^^^^^^^^^^
+
+DenseSet is a simple quadratically probed hash table. It excels at supporting
+small values: it uses a single allocation to hold all of the pairs that are
+currently inserted in the set. DenseSet is a great way to unique small values
+that are not simple pointers (use :ref:`SmallPtrSet <dss_smallptrset>` for
+pointers). Note that DenseSet has the same requirements for the value type that
+:ref:`DenseMap <dss_densemap>` has.
+
+.. _dss_sparseset:
+
+llvm/ADT/SparseSet.h
+^^^^^^^^^^^^^^^^^^^^
+
+SparseSet holds a small number of objects identified by unsigned keys of
+moderate size. It uses a lot of memory, but provides operations that are almost
+as fast as a vector. Typical keys are physical registers, virtual registers, or
+numbered basic blocks.
+
+SparseSet is useful for algorithms that need very fast clear/find/insert/erase
+and fast iteration over small sets. It is not intended for building composite
+data structures.
+
+.. _dss_sparsemultiset:
+
+llvm/ADT/SparseMultiSet.h
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+SparseMultiSet adds multiset behavior to SparseSet, while retaining SparseSet's
+desirable attributes. Like SparseSet, it typically uses a lot of memory, but
+provides operations that are almost as fast as a vector. Typical keys are
+physical registers, virtual registers, or numbered basic blocks.
+
+SparseMultiSet is useful for algorithms that need very fast
+clear/find/insert/erase of the entire collection, and iteration over sets of
+elements sharing a key. It is often a more efficient choice than using composite
+data structures (e.g. vector-of-vectors, map-of-vectors). It is not intended for
+building composite data structures.
+
+.. _dss_FoldingSet:
+
+llvm/ADT/FoldingSet.h
+^^^^^^^^^^^^^^^^^^^^^
+
+FoldingSet is an aggregate class that is really good at uniquing
+expensive-to-create or polymorphic objects. It is a combination of a chained
+hash table with intrusive links (uniqued objects are required to inherit from
+FoldingSetNode) that uses :ref:`SmallVector <dss_smallvector>` as part of its ID
+process.
+
+Consider a case where you want to implement a "getOrCreateFoo" method for a
+complex object (for example, a node in the code generator). The client has a
+description of **what** it wants to generate (it knows the opcode and all the
+operands), but we don't want to 'new' a node, then try inserting it into a set
+only to find out it already exists, at which point we would have to delete it
+and return the node that already exists.
+
+To support this style of client, FoldingSet perform a query with a
+FoldingSetNodeID (which wraps SmallVector) that can be used to describe the
+element that we want to query for. The query either returns the element
+matching the ID or it returns an opaque ID that indicates where insertion should
+take place. Construction of the ID usually does not require heap traffic.
+
+Because FoldingSet uses intrusive links, it can support polymorphic objects in
+the set (for example, you can have SDNode instances mixed with LoadSDNodes).
+Because the elements are individually allocated, pointers to the elements are
+stable: inserting or removing elements does not invalidate any pointers to other
+elements.
+
+.. _dss_set:
+
+<set>
+^^^^^
+
+``std::set`` is a reasonable all-around set class, which is decent at many
+things but great at nothing. std::set allocates memory for each element
+inserted (thus it is very malloc intensive) and typically stores three pointers
+per element in the set (thus adding a large amount of per-element space
+overhead). It offers guaranteed log(n) performance, which is not particularly
+fast from a complexity standpoint (particularly if the elements of the set are
+expensive to compare, like strings), and has extremely high constant factors for
+lookup, insertion and removal.
+
+The advantages of std::set are that its iterators are stable (deleting or
+inserting an element from the set does not affect iterators or pointers to other
+elements) and that iteration over the set is guaranteed to be in sorted order.
+If the elements in the set are large, then the relative overhead of the pointers
+and malloc traffic is not a big deal, but if the elements of the set are small,
+std::set is almost never a good choice.
+
+.. _dss_setvector:
+
+llvm/ADT/SetVector.h
+^^^^^^^^^^^^^^^^^^^^
+
+LLVM's ``SetVector<Type>`` is an adapter class that combines your choice of a
+set-like container along with a :ref:`Sequential Container <ds_sequential>` The
+important property that this provides is efficient insertion with uniquing
+(duplicate elements are ignored) with iteration support. It implements this by
+inserting elements into both a set-like container and the sequential container,
+using the set-like container for uniquing and the sequential container for
+iteration.
+
+The difference between SetVector and other sets is that the order of iteration
+is guaranteed to match the order of insertion into the SetVector. This property
+is really important for things like sets of pointers. Because pointer values
+are non-deterministic (e.g. vary across runs of the program on different
+machines), iterating over the pointers in the set will not be in a well-defined
+order.
+
+The drawback of SetVector is that it requires twice as much space as a normal
+set and has the sum of constant factors from the set-like container and the
+sequential container that it uses. Use it **only** if you need to iterate over
+the elements in a deterministic order. SetVector is also expensive to delete
+elements out of (linear time), unless you use its "pop_back" method, which is
+faster.
+
+``SetVector`` is an adapter class that defaults to using ``std::vector`` and a
+size 16 ``SmallSet`` for the underlying containers, so it is quite expensive.
+However, ``"llvm/ADT/SetVector.h"`` also provides a ``SmallSetVector`` class,
+which defaults to using a ``SmallVector`` and ``SmallSet`` of a specified size.
+If you use this, and if your sets are dynamically smaller than ``N``, you will
+save a lot of heap traffic.
+
+.. _dss_uniquevector:
+
+llvm/ADT/UniqueVector.h
+^^^^^^^^^^^^^^^^^^^^^^^
+
+UniqueVector is similar to :ref:`SetVector <dss_setvector>` but it retains a
+unique ID for each element inserted into the set. It internally contains a map
+and a vector, and it assigns a unique ID for each value inserted into the set.
+
+UniqueVector is very expensive: its cost is the sum of the cost of maintaining
+both the map and vector, it has high complexity, high constant factors, and
+produces a lot of malloc traffic. It should be avoided.
+
+.. _dss_immutableset:
+
+llvm/ADT/ImmutableSet.h
+^^^^^^^^^^^^^^^^^^^^^^^
+
+ImmutableSet is an immutable (functional) set implementation based on an AVL
+tree. Adding or removing elements is done through a Factory object and results
+in the creation of a new ImmutableSet object. If an ImmutableSet already exists
+with the given contents, then the existing one is returned; equality is compared
+with a FoldingSetNodeID. The time and space complexity of add or remove
+operations is logarithmic in the size of the original set.
+
+There is no method for returning an element of the set, you can only check for
+membership.
+
+.. _dss_otherset:
+
+Other Set-Like Container Options
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The STL provides several other options, such as std::multiset and the various
+"hash_set" like containers (whether from C++ TR1 or from the SGI library). We
+never use hash_set and unordered_set because they are generally very expensive
+(each insertion requires a malloc) and very non-portable.
+
+std::multiset is useful if you're not interested in elimination of duplicates,
+but has all the drawbacks of std::set. A sorted vector (where you don't delete
+duplicate entries) or some other approach is almost always better.
+
+.. _ds_map:
+
+Map-Like Containers (std::map, DenseMap, etc)
+---------------------------------------------
+
+Map-like containers are useful when you want to associate data to a key. As
+usual, there are a lot of different ways to do this. :)
+
+.. _dss_sortedvectormap:
+
+A sorted 'vector'
+^^^^^^^^^^^^^^^^^
+
+If your usage pattern follows a strict insert-then-query approach, you can
+trivially use the same approach as :ref:`sorted vectors for set-like containers
+<dss_sortedvectorset>`. The only difference is that your query function (which
+uses std::lower_bound to get efficient log(n) lookup) should only compare the
+key, not both the key and value. This yields the same advantages as sorted
+vectors for sets.
+
+.. _dss_stringmap:
+
+llvm/ADT/StringMap.h
+^^^^^^^^^^^^^^^^^^^^
+
+Strings are commonly used as keys in maps, and they are difficult to support
+efficiently: they are variable length, inefficient to hash and compare when
+long, expensive to copy, etc. StringMap is a specialized container designed to
+cope with these issues. It supports mapping an arbitrary range of bytes to an
+arbitrary other object.
+
+The StringMap implementation uses a quadratically-probed hash table, where the
+buckets store a pointer to the heap allocated entries (and some other stuff).
+The entries in the map must be heap allocated because the strings are variable
+length. The string data (key) and the element object (value) are stored in the
+same allocation with the string data immediately after the element object.
+This container guarantees the "``(char*)(&Value+1)``" points to the key string
+for a value.
+
+The StringMap is very fast for several reasons: quadratic probing is very cache
+efficient for lookups, the hash value of strings in buckets is not recomputed
+when looking up an element, StringMap rarely has to touch the memory for
+unrelated objects when looking up a value (even when hash collisions happen),
+hash table growth does not recompute the hash values for strings already in the
+table, and each pair in the map is store in a single allocation (the string data
+is stored in the same allocation as the Value of a pair).
+
+StringMap also provides query methods that take byte ranges, so it only ever
+copies a string if a value is inserted into the table.
+
+StringMap iteratation order, however, is not guaranteed to be deterministic, so
+any uses which require that should instead use a std::map.
+
+.. _dss_indexmap:
+
+llvm/ADT/IndexedMap.h
+^^^^^^^^^^^^^^^^^^^^^
+
+IndexedMap is a specialized container for mapping small dense integers (or
+values that can be mapped to small dense integers) to some other type. It is
+internally implemented as a vector with a mapping function that maps the keys
+to the dense integer range.
+
+This is useful for cases like virtual registers in the LLVM code generator: they
+have a dense mapping that is offset by a compile-time constant (the first
+virtual register ID).
+
+.. _dss_densemap:
+
+llvm/ADT/DenseMap.h
+^^^^^^^^^^^^^^^^^^^
+
+DenseMap is a simple quadratically probed hash table. It excels at supporting
+small keys and values: it uses a single allocation to hold all of the pairs
+that are currently inserted in the map. DenseMap is a great way to map
+pointers to pointers, or map other small types to each other.
+
+There are several aspects of DenseMap that you should be aware of, however.
+The iterators in a DenseMap are invalidated whenever an insertion occurs,
+unlike map. Also, because DenseMap allocates space for a large number of
+key/value pairs (it starts with 64 by default), it will waste a lot of space if
+your keys or values are large. Finally, you must implement a partial
+specialization of DenseMapInfo for the key that you want, if it isn't already
+supported. This is required to tell DenseMap about two special marker values
+(which can never be inserted into the map) that it needs internally.
+
+DenseMap's find_as() method supports lookup operations using an alternate key
+type. This is useful in cases where the normal key type is expensive to
+construct, but cheap to compare against. The DenseMapInfo is responsible for
+defining the appropriate comparison and hashing methods for each alternate key
+type used.
+
+.. _dss_valuemap:
+
+llvm/IR/ValueMap.h
+^^^^^^^^^^^^^^^^^^^
+
+ValueMap is a wrapper around a :ref:`DenseMap <dss_densemap>` mapping
+``Value*``\ s (or subclasses) to another type. When a Value is deleted or
+RAUW'ed, ValueMap will update itself so the new version of the key is mapped to
+the same value, just as if the key were a WeakVH. You can configure exactly how
+this happens, and what else happens on these two events, by passing a ``Config``
+parameter to the ValueMap template.
+
+.. _dss_intervalmap:
+
+llvm/ADT/IntervalMap.h
+^^^^^^^^^^^^^^^^^^^^^^
+
+IntervalMap is a compact map for small keys and values. It maps key intervals
+instead of single keys, and it will automatically coalesce adjacent intervals.
+When then map only contains a few intervals, they are stored in the map object
+itself to avoid allocations.
+
+The IntervalMap iterators are quite big, so they should not be passed around as
+STL iterators. The heavyweight iterators allow a smaller data structure.
+
+.. _dss_map:
+
+<map>
+^^^^^
+
+std::map has similar characteristics to :ref:`std::set <dss_set>`: it uses a
+single allocation per pair inserted into the map, it offers log(n) lookup with
+an extremely large constant factor, imposes a space penalty of 3 pointers per
+pair in the map, etc.
+
+std::map is most useful when your keys or values are very large, if you need to
+iterate over the collection in sorted order, or if you need stable iterators
+into the map (i.e. they don't get invalidated if an insertion or deletion of
+another element takes place).
+
+.. _dss_mapvector:
+
+llvm/ADT/MapVector.h
+^^^^^^^^^^^^^^^^^^^^
+
+``MapVector<KeyT,ValueT>`` provides a subset of the DenseMap interface. The
+main difference is that the iteration order is guaranteed to be the insertion
+order, making it an easy (but somewhat expensive) solution for non-deterministic
+iteration over maps of pointers.
+
+It is implemented by mapping from key to an index in a vector of key,value
+pairs. This provides fast lookup and iteration, but has two main drawbacks:
+the key is stored twice and removing elements takes linear time. If it is
+necessary to remove elements, it's best to remove them in bulk using
+``remove_if()``.
+
+.. _dss_inteqclasses:
+
+llvm/ADT/IntEqClasses.h
+^^^^^^^^^^^^^^^^^^^^^^^
+
+IntEqClasses provides a compact representation of equivalence classes of small
+integers. Initially, each integer in the range 0..n-1 has its own equivalence
+class. Classes can be joined by passing two class representatives to the
+join(a, b) method. Two integers are in the same class when findLeader() returns
+the same representative.
+
+Once all equivalence classes are formed, the map can be compressed so each
+integer 0..n-1 maps to an equivalence class number in the range 0..m-1, where m
+is the total number of equivalence classes. The map must be uncompressed before
+it can be edited again.
+
+.. _dss_immutablemap:
+
+llvm/ADT/ImmutableMap.h
+^^^^^^^^^^^^^^^^^^^^^^^
+
+ImmutableMap is an immutable (functional) map implementation based on an AVL
+tree. Adding or removing elements is done through a Factory object and results
+in the creation of a new ImmutableMap object. If an ImmutableMap already exists
+with the given key set, then the existing one is returned; equality is compared
+with a FoldingSetNodeID. The time and space complexity of add or remove
+operations is logarithmic in the size of the original map.
+
+.. _dss_othermap:
+
+Other Map-Like Container Options
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The STL provides several other options, such as std::multimap and the various
+"hash_map" like containers (whether from C++ TR1 or from the SGI library). We
+never use hash_set and unordered_set because they are generally very expensive
+(each insertion requires a malloc) and very non-portable.
+
+std::multimap is useful if you want to map a key to multiple values, but has all
+the drawbacks of std::map. A sorted vector or some other approach is almost
+always better.
+
+.. _ds_bit:
+
+Bit storage containers (BitVector, SparseBitVector)
+---------------------------------------------------
+
+Unlike the other containers, there are only two bit storage containers, and
+choosing when to use each is relatively straightforward.
+
+One additional option is ``std::vector<bool>``: we discourage its use for two
+reasons 1) the implementation in many common compilers (e.g. commonly
+available versions of GCC) is extremely inefficient and 2) the C++ standards
+committee is likely to deprecate this container and/or change it significantly
+somehow. In any case, please don't use it.
+
+.. _dss_bitvector:
+
+BitVector
+^^^^^^^^^
+
+The BitVector container provides a dynamic size set of bits for manipulation.
+It supports individual bit setting/testing, as well as set operations. The set
+operations take time O(size of bitvector), but operations are performed one word
+at a time, instead of one bit at a time. This makes the BitVector very fast for
+set operations compared to other containers. Use the BitVector when you expect
+the number of set bits to be high (i.e. a dense set).
+
+.. _dss_smallbitvector:
+
+SmallBitVector
+^^^^^^^^^^^^^^
+
+The SmallBitVector container provides the same interface as BitVector, but it is
+optimized for the case where only a small number of bits, less than 25 or so,
+are needed. It also transparently supports larger bit counts, but slightly less
+efficiently than a plain BitVector, so SmallBitVector should only be used when
+larger counts are rare.
+
+At this time, SmallBitVector does not support set operations (and, or, xor), and
+its operator[] does not provide an assignable lvalue.
+
+.. _dss_sparsebitvector:
+
+SparseBitVector
+^^^^^^^^^^^^^^^
+
+The SparseBitVector container is much like BitVector, with one major difference:
+Only the bits that are set, are stored. This makes the SparseBitVector much
+more space efficient than BitVector when the set is sparse, as well as making
+set operations O(number of set bits) instead of O(size of universe). The
+downside to the SparseBitVector is that setting and testing of random bits is
+O(N), and on large SparseBitVectors, this can be slower than BitVector. In our
+implementation, setting or testing bits in sorted order (either forwards or
+reverse) is O(1) worst case. Testing and setting bits within 128 bits (depends
+on size) of the current bit is also O(1). As a general statement,
+testing/setting bits in a SparseBitVector is O(distance away from last set bit).
+
+.. _common:
+
+Helpful Hints for Common Operations
+===================================
+
+This section describes how to perform some very simple transformations of LLVM
+code. This is meant to give examples of common idioms used, showing the
+practical side of LLVM transformations.
+
+Because this is a "how-to" section, you should also read about the main classes
+that you will be working with. The :ref:`Core LLVM Class Hierarchy Reference
+<coreclasses>` contains details and descriptions of the main classes that you
+should know about.
+
+.. _inspection:
+
+Basic Inspection and Traversal Routines
+---------------------------------------
+
+The LLVM compiler infrastructure have many different data structures that may be
+traversed. Following the example of the C++ standard template library, the
+techniques used to traverse these various data structures are all basically the
+same. For a enumerable sequence of values, the ``XXXbegin()`` function (or
+method) returns an iterator to the start of the sequence, the ``XXXend()``
+function returns an iterator pointing to one past the last valid element of the
+sequence, and there is some ``XXXiterator`` data type that is common between the
+two operations.
+
+Because the pattern for iteration is common across many different aspects of the
+program representation, the standard template library algorithms may be used on
+them, and it is easier to remember how to iterate. First we show a few common
+examples of the data structures that need to be traversed. Other data
+structures are traversed in very similar ways.
+
+.. _iterate_function:
+
+Iterating over the ``BasicBlock`` in a ``Function``
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+It's quite common to have a ``Function`` instance that you'd like to transform
+in some way; in particular, you'd like to manipulate its ``BasicBlock``\ s. To
+facilitate this, you'll need to iterate over all of the ``BasicBlock``\ s that
+constitute the ``Function``. The following is an example that prints the name
+of a ``BasicBlock`` and the number of ``Instruction``\ s it contains:
+
+.. code-block:: c++
+
+ // func is a pointer to a Function instance
+ for (Function::iterator i = func->begin(), e = func->end(); i != e; ++i)
+ // Print out the name of the basic block if it has one, and then the
+ // number of instructions that it contains
+ errs() << "Basic block (name=" << i->getName() << ") has "
+ << i->size() << " instructions.\n";
+
+Note that i can be used as if it were a pointer for the purposes of invoking
+member functions of the ``Instruction`` class. This is because the indirection
+operator is overloaded for the iterator classes. In the above code, the
+expression ``i->size()`` is exactly equivalent to ``(*i).size()`` just like
+you'd expect.
+
+.. _iterate_basicblock:
+
+Iterating over the ``Instruction`` in a ``BasicBlock``
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Just like when dealing with ``BasicBlock``\ s in ``Function``\ s, it's easy to
+iterate over the individual instructions that make up ``BasicBlock``\ s. Here's
+a code snippet that prints out each instruction in a ``BasicBlock``:
+
+.. code-block:: c++
+
+ // blk is a pointer to a BasicBlock instance
+ for (BasicBlock::iterator i = blk->begin(), e = blk->end(); i != e; ++i)
+ // The next statement works since operator<<(ostream&,...)
+ // is overloaded for Instruction&
+ errs() << *i << "\n";
+
+
+However, this isn't really the best way to print out the contents of a
+``BasicBlock``! Since the ostream operators are overloaded for virtually
+anything you'll care about, you could have just invoked the print routine on the
+basic block itself: ``errs() << *blk << "\n";``.
+
+.. _iterate_insiter:
+
+Iterating over the ``Instruction`` in a ``Function``
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+If you're finding that you commonly iterate over a ``Function``'s
+``BasicBlock``\ s and then that ``BasicBlock``'s ``Instruction``\ s,
+``InstIterator`` should be used instead. You'll need to include
+``llvm/IR/InstIterator.h`` (`doxygen
+<http://llvm.org/doxygen/InstIterator_8h.html>`__) and then instantiate
+``InstIterator``\ s explicitly in your code. Here's a small example that shows
+how to dump all instructions in a function to the standard error stream:
+
+.. code-block:: c++
+
+ #include "llvm/IR/InstIterator.h"
+
+ // F is a pointer to a Function instance
+ for (inst_iterator I = inst_begin(F), E = inst_end(F); I != E; ++I)
+ errs() << *I << "\n";
+
+Easy, isn't it? You can also use ``InstIterator``\ s to fill a work list with
+its initial contents. For example, if you wanted to initialize a work list to
+contain all instructions in a ``Function`` F, all you would need to do is
+something like:
+
+.. code-block:: c++
+
+ std::set<Instruction*> worklist;
+ // or better yet, SmallPtrSet<Instruction*, 64> worklist;
+
+ for (inst_iterator I = inst_begin(F), E = inst_end(F); I != E; ++I)
+ worklist.insert(&*I);
+
+The STL set ``worklist`` would now contain all instructions in the ``Function``
+pointed to by F.
+
+.. _iterate_convert:
+
+Turning an iterator into a class pointer (and vice-versa)
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Sometimes, it'll be useful to grab a reference (or pointer) to a class instance
+when all you've got at hand is an iterator. Well, extracting a reference or a
+pointer from an iterator is very straight-forward. Assuming that ``i`` is a
+``BasicBlock::iterator`` and ``j`` is a ``BasicBlock::const_iterator``:
+
+.. code-block:: c++
+
+ Instruction& inst = *i; // Grab reference to instruction reference
+ Instruction* pinst = &*i; // Grab pointer to instruction reference
+ const Instruction& inst = *j;
+
+However, the iterators you'll be working with in the LLVM framework are special:
+they will automatically convert to a ptr-to-instance type whenever they need to.
+Instead of derferencing the iterator and then taking the address of the result,
+you can simply assign the iterator to the proper pointer type and you get the
+dereference and address-of operation as a result of the assignment (behind the
+scenes, this is a result of overloading casting mechanisms). Thus the last line
+of the last example,
+
+.. code-block:: c++
+
+ Instruction *pinst = &*i;
+
+is semantically equivalent to
+
+.. code-block:: c++
+
+ Instruction *pinst = i;
+
+It's also possible to turn a class pointer into the corresponding iterator, and
+this is a constant time operation (very efficient). The following code snippet
+illustrates use of the conversion constructors provided by LLVM iterators. By
+using these, you can explicitly grab the iterator of something without actually
+obtaining it via iteration over some structure:
+
+.. code-block:: c++
+
+ void printNextInstruction(Instruction* inst) {
+ BasicBlock::iterator it(inst);
+ ++it; // After this line, it refers to the instruction after *inst
+ if (it != inst->getParent()->end()) errs() << *it << "\n";
+ }
+
+Unfortunately, these implicit conversions come at a cost; they prevent these
+iterators from conforming to standard iterator conventions, and thus from being
+usable with standard algorithms and containers. For example, they prevent the
+following code, where ``B`` is a ``BasicBlock``, from compiling:
+
+.. code-block:: c++
+
+ llvm::SmallVector<llvm::Instruction *, 16>(B->begin(), B->end());
+
+Because of this, these implicit conversions may be removed some day, and
+``operator*`` changed to return a pointer instead of a reference.
+
+.. _iterate_complex:
+
+Finding call sites: a slightly more complex example
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Say that you're writing a FunctionPass and would like to count all the locations
+in the entire module (that is, across every ``Function``) where a certain
+function (i.e., some ``Function *``) is already in scope. As you'll learn
+later, you may want to use an ``InstVisitor`` to accomplish this in a much more
+straight-forward manner, but this example will allow us to explore how you'd do
+it if you didn't have ``InstVisitor`` around. In pseudo-code, this is what we
+want to do:
+
+.. code-block:: none
+
+ initialize callCounter to zero
+ for each Function f in the Module
+ for each BasicBlock b in f
+ for each Instruction i in b
+ if (i is a CallInst and calls the given function)
+ increment callCounter
+
+And the actual code is (remember, because we're writing a ``FunctionPass``, our
+``FunctionPass``-derived class simply has to override the ``runOnFunction``
+method):
+
+.. code-block:: c++
+
+ Function* targetFunc = ...;
+
+ class OurFunctionPass : public FunctionPass {
+ public:
+ OurFunctionPass(): callCounter(0) { }
+
+ virtual runOnFunction(Function& F) {
+ for (Function::iterator b = F.begin(), be = F.end(); b != be; ++b) {
+ for (BasicBlock::iterator i = b->begin(), ie = b->end(); i != ie; ++i) {
+ if (CallInst* callInst = dyn_cast<CallInst>(&*i)) {
+ // We know we've encountered a call instruction, so we
+ // need to determine if it's a call to the
+ // function pointed to by m_func or not.
+ if (callInst->getCalledFunction() == targetFunc)
+ ++callCounter;
+ }
+ }
+ }
+ }
+
+ private:
+ unsigned callCounter;
+ };
+
+.. _calls_and_invokes:
+
+Treating calls and invokes the same way
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+You may have noticed that the previous example was a bit oversimplified in that
+it did not deal with call sites generated by 'invoke' instructions. In this,
+and in other situations, you may find that you want to treat ``CallInst``\ s and
+``InvokeInst``\ s the same way, even though their most-specific common base
+class is ``Instruction``, which includes lots of less closely-related things.
+For these cases, LLVM provides a handy wrapper class called ``CallSite``
+(`doxygen <http://llvm.org/doxygen/classllvm_1_1CallSite.html>`__) It is
+essentially a wrapper around an ``Instruction`` pointer, with some methods that
+provide functionality common to ``CallInst``\ s and ``InvokeInst``\ s.
+
+This class has "value semantics": it should be passed by value, not by reference
+and it should not be dynamically allocated or deallocated using ``operator new``
+or ``operator delete``. It is efficiently copyable, assignable and
+constructable, with costs equivalents to that of a bare pointer. If you look at
+its definition, it has only a single pointer member.
+
+.. _iterate_chains:
+
+Iterating over def-use & use-def chains
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Frequently, we might have an instance of the ``Value`` class (`doxygen
+<http://llvm.org/doxygen/classllvm_1_1Value.html>`__) and we want to determine
+which ``User`` s use the ``Value``. The list of all ``User``\ s of a particular
+``Value`` is called a *def-use* chain. For example, let's say we have a
+``Function*`` named ``F`` to a particular function ``foo``. Finding all of the
+instructions that *use* ``foo`` is as simple as iterating over the *def-use*
+chain of ``F``:
+
+.. code-block:: c++
+
+ Function *F = ...;
+
+ for (User *U : GV->users()) {
+ if (Instruction *Inst = dyn_cast<Instruction>(U)) {
+ errs() << "F is used in instruction:\n";
+ errs() << *Inst << "\n";
+ }
+
+Alternatively, it's common to have an instance of the ``User`` Class (`doxygen
+<http://llvm.org/doxygen/classllvm_1_1User.html>`__) and need to know what
+``Value``\ s are used by it. The list of all ``Value``\ s used by a ``User`` is
+known as a *use-def* chain. Instances of class ``Instruction`` are common
+``User`` s, so we might want to iterate over all of the values that a particular
+instruction uses (that is, the operands of the particular ``Instruction``):
+
+.. code-block:: c++
+
+ Instruction *pi = ...;
+
+ for (Use &U : pi->operands()) {
+ Value *v = U.get();
+ // ...
+ }
+
+Declaring objects as ``const`` is an important tool of enforcing mutation free
+algorithms (such as analyses, etc.). For this purpose above iterators come in
+constant flavors as ``Value::const_use_iterator`` and
+``Value::const_op_iterator``. They automatically arise when calling
+``use/op_begin()`` on ``const Value*``\ s or ``const User*``\ s respectively.
+Upon dereferencing, they return ``const Use*``\ s. Otherwise the above patterns
+remain unchanged.
+
+.. _iterate_preds:
+
+Iterating over predecessors & successors of blocks
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Iterating over the predecessors and successors of a block is quite easy with the
+routines defined in ``"llvm/Support/CFG.h"``. Just use code like this to
+iterate over all predecessors of BB:
+
+.. code-block:: c++
+
+ #include "llvm/Support/CFG.h"
+ BasicBlock *BB = ...;
+
+ for (pred_iterator PI = pred_begin(BB), E = pred_end(BB); PI != E; ++PI) {
+ BasicBlock *Pred = *PI;
+ // ...
+ }
+
+Similarly, to iterate over successors use ``succ_iterator/succ_begin/succ_end``.
+
+.. _simplechanges:
+
+Making simple changes
+---------------------
+
+There are some primitive transformation operations present in the LLVM
+infrastructure that are worth knowing about. When performing transformations,
+it's fairly common to manipulate the contents of basic blocks. This section
+describes some of the common methods for doing so and gives example code.
+
+.. _schanges_creating:
+
+Creating and inserting new ``Instruction``\ s
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+*Instantiating Instructions*
+
+Creation of ``Instruction``\ s is straight-forward: simply call the constructor
+for the kind of instruction to instantiate and provide the necessary parameters.
+For example, an ``AllocaInst`` only *requires* a (const-ptr-to) ``Type``. Thus:
+
+.. code-block:: c++
+
+ AllocaInst* ai = new AllocaInst(Type::Int32Ty);
+
+will create an ``AllocaInst`` instance that represents the allocation of one
+integer in the current stack frame, at run time. Each ``Instruction`` subclass
+is likely to have varying default parameters which change the semantics of the
+instruction, so refer to the `doxygen documentation for the subclass of
+Instruction <http://llvm.org/doxygen/classllvm_1_1Instruction.html>`_ that
+you're interested in instantiating.
+
+*Naming values*
+
+It is very useful to name the values of instructions when you're able to, as
+this facilitates the debugging of your transformations. If you end up looking
+at generated LLVM machine code, you definitely want to have logical names
+associated with the results of instructions! By supplying a value for the
+``Name`` (default) parameter of the ``Instruction`` constructor, you associate a
+logical name with the result of the instruction's execution at run time. For
+example, say that I'm writing a transformation that dynamically allocates space
+for an integer on the stack, and that integer is going to be used as some kind
+of index by some other code. To accomplish this, I place an ``AllocaInst`` at
+the first point in the first ``BasicBlock`` of some ``Function``, and I'm
+intending to use it within the same ``Function``. I might do:
+
+.. code-block:: c++
+
+ AllocaInst* pa = new AllocaInst(Type::Int32Ty, 0, "indexLoc");
+
+where ``indexLoc`` is now the logical name of the instruction's execution value,
+which is a pointer to an integer on the run time stack.
+
+*Inserting instructions*
+
+There are essentially three ways to insert an ``Instruction`` into an existing
+sequence of instructions that form a ``BasicBlock``:
+
+* Insertion into an explicit instruction list
+
+ Given a ``BasicBlock* pb``, an ``Instruction* pi`` within that ``BasicBlock``,
+ and a newly-created instruction we wish to insert before ``*pi``, we do the
+ following:
+
+ .. code-block:: c++
+
+ BasicBlock *pb = ...;
+ Instruction *pi = ...;
+ Instruction *newInst = new Instruction(...);
+
+ pb->getInstList().insert(pi, newInst); // Inserts newInst before pi in pb
+
+ Appending to the end of a ``BasicBlock`` is so common that the ``Instruction``
+ class and ``Instruction``-derived classes provide constructors which take a
+ pointer to a ``BasicBlock`` to be appended to. For example code that looked
+ like:
+
+ .. code-block:: c++
+
+ BasicBlock *pb = ...;
+ Instruction *newInst = new Instruction(...);
+
+ pb->getInstList().push_back(newInst); // Appends newInst to pb
+
+ becomes:
+
+ .. code-block:: c++
+
+ BasicBlock *pb = ...;
+ Instruction *newInst = new Instruction(..., pb);
+
+ which is much cleaner, especially if you are creating long instruction
+ streams.
+
+* Insertion into an implicit instruction list
+
+ ``Instruction`` instances that are already in ``BasicBlock``\ s are implicitly
+ associated with an existing instruction list: the instruction list of the
+ enclosing basic block. Thus, we could have accomplished the same thing as the
+ above code without being given a ``BasicBlock`` by doing:
+
+ .. code-block:: c++
+
+ Instruction *pi = ...;
+ Instruction *newInst = new Instruction(...);
+
+ pi->getParent()->getInstList().insert(pi, newInst);
+
+ In fact, this sequence of steps occurs so frequently that the ``Instruction``
+ class and ``Instruction``-derived classes provide constructors which take (as
+ a default parameter) a pointer to an ``Instruction`` which the newly-created
+ ``Instruction`` should precede. That is, ``Instruction`` constructors are
+ capable of inserting the newly-created instance into the ``BasicBlock`` of a
+ provided instruction, immediately before that instruction. Using an
+ ``Instruction`` constructor with a ``insertBefore`` (default) parameter, the
+ above code becomes:
+
+ .. code-block:: c++
+
+ Instruction* pi = ...;
+ Instruction* newInst = new Instruction(..., pi);
+
+ which is much cleaner, especially if you're creating a lot of instructions and
+ adding them to ``BasicBlock``\ s.
+
+* Insertion using an instance of ``IRBuilder``
+
+ Inserting several ``Instruction``\ s can be quite laborious using the previous
+ methods. The ``IRBuilder`` is a convenience class that can be used to add
+ several instructions to the end of a ``BasicBlock`` or before a particular
+ ``Instruction``. It also supports constant folding and renaming named
+ registers (see ``IRBuilder``'s template arguments).
+
+ The example below demonstrates a very simple use of the ``IRBuilder`` where
+ three instructions are inserted before the instruction ``pi``. The first two
+ instructions are Call instructions and third instruction multiplies the return
+ value of the two calls.
+
+ .. code-block:: c++
+
+ Instruction *pi = ...;
+ IRBuilder<> Builder(pi);
+ CallInst* callOne = Builder.CreateCall(...);
+ CallInst* callTwo = Builder.CreateCall(...);
+ Value* result = Builder.CreateMul(callOne, callTwo);
+
+ The example below is similar to the above example except that the created
+ ``IRBuilder`` inserts instructions at the end of the ``BasicBlock`` ``pb``.
+
+ .. code-block:: c++
+
+ BasicBlock *pb = ...;
+ IRBuilder<> Builder(pb);
+ CallInst* callOne = Builder.CreateCall(...);
+ CallInst* callTwo = Builder.CreateCall(...);
+ Value* result = Builder.CreateMul(callOne, callTwo);
+
+ See :doc:`tutorial/LangImpl3` for a practical use of the ``IRBuilder``.
+
+
+.. _schanges_deleting:
+
+Deleting Instructions
+^^^^^^^^^^^^^^^^^^^^^
+
+Deleting an instruction from an existing sequence of instructions that form a
+BasicBlock_ is very straight-forward: just call the instruction's
+``eraseFromParent()`` method. For example:
+
+.. code-block:: c++
+
+ Instruction *I = .. ;
+ I->eraseFromParent();
+
+This unlinks the instruction from its containing basic block and deletes it. If
+you'd just like to unlink the instruction from its containing basic block but
+not delete it, you can use the ``removeFromParent()`` method.
+
+.. _schanges_replacing:
+
+Replacing an Instruction with another Value
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Replacing individual instructions
+"""""""""""""""""""""""""""""""""
+
+Including "`llvm/Transforms/Utils/BasicBlockUtils.h
+<http://llvm.org/doxygen/BasicBlockUtils_8h-source.html>`_" permits use of two
+very useful replace functions: ``ReplaceInstWithValue`` and
+``ReplaceInstWithInst``.
+
+.. _schanges_deleting_sub:
+
+Deleting Instructions
+"""""""""""""""""""""
+
+* ``ReplaceInstWithValue``
+
+ This function replaces all uses of a given instruction with a value, and then
+ removes the original instruction. The following example illustrates the
+ replacement of the result of a particular ``AllocaInst`` that allocates memory
+ for a single integer with a null pointer to an integer.
+
+ .. code-block:: c++
+
+ AllocaInst* instToReplace = ...;
+ BasicBlock::iterator ii(instToReplace);
+
+ ReplaceInstWithValue(instToReplace->getParent()->getInstList(), ii,
+ Constant::getNullValue(PointerType::getUnqual(Type::Int32Ty)));
+
+* ``ReplaceInstWithInst``
+
+ This function replaces a particular instruction with another instruction,
+ inserting the new instruction into the basic block at the location where the
+ old instruction was, and replacing any uses of the old instruction with the
+ new instruction. The following example illustrates the replacement of one
+ ``AllocaInst`` with another.
+
+ .. code-block:: c++
+
+ AllocaInst* instToReplace = ...;
+ BasicBlock::iterator ii(instToReplace);
+
+ ReplaceInstWithInst(instToReplace->getParent()->getInstList(), ii,
+ new AllocaInst(Type::Int32Ty, 0, "ptrToReplacedInt"));
+
+
+Replacing multiple uses of Users and Values
+"""""""""""""""""""""""""""""""""""""""""""
+
+You can use ``Value::replaceAllUsesWith`` and ``User::replaceUsesOfWith`` to
+change more than one use at a time. See the doxygen documentation for the
+`Value Class <http://llvm.org/doxygen/classllvm_1_1Value.html>`_ and `User Class
+<http://llvm.org/doxygen/classllvm_1_1User.html>`_, respectively, for more
+information.
+
+.. _schanges_deletingGV:
+
+Deleting GlobalVariables
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+Deleting a global variable from a module is just as easy as deleting an
+Instruction. First, you must have a pointer to the global variable that you
+wish to delete. You use this pointer to erase it from its parent, the module.
+For example:
+
+.. code-block:: c++
+
+ GlobalVariable *GV = .. ;
+
+ GV->eraseFromParent();
+
+
+.. _create_types:
+
+How to Create Types
+-------------------
+
+In generating IR, you may need some complex types. If you know these types
+statically, you can use ``TypeBuilder<...>::get()``, defined in
+``llvm/Support/TypeBuilder.h``, to retrieve them. ``TypeBuilder`` has two forms
+depending on whether you're building types for cross-compilation or native
+library use. ``TypeBuilder<T, true>`` requires that ``T`` be independent of the
+host environment, meaning that it's built out of types from the ``llvm::types``
+(`doxygen <http://llvm.org/doxygen/namespacellvm_1_1types.html>`__) namespace
+and pointers, functions, arrays, etc. built of those. ``TypeBuilder<T, false>``
+additionally allows native C types whose size may depend on the host compiler.
+For example,
+
+.. code-block:: c++
+
+ FunctionType *ft = TypeBuilder<types::i<8>(types::i<32>*), true>::get();
+
+is easier to read and write than the equivalent
+
+.. code-block:: c++
+
+ std::vector<const Type*> params;
+ params.push_back(PointerType::getUnqual(Type::Int32Ty));
+ FunctionType *ft = FunctionType::get(Type::Int8Ty, params, false);
+
+See the `class comment
+<http://llvm.org/doxygen/TypeBuilder_8h-source.html#l00001>`_ for more details.
+
+.. _threading:
+
+Threads and LLVM
+================
+
+This section describes the interaction of the LLVM APIs with multithreading,
+both on the part of client applications, and in the JIT, in the hosted
+application.
+
+Note that LLVM's support for multithreading is still relatively young. Up
+through version 2.5, the execution of threaded hosted applications was
+supported, but not threaded client access to the APIs. While this use case is
+now supported, clients *must* adhere to the guidelines specified below to ensure
+proper operation in multithreaded mode.
+
+Note that, on Unix-like platforms, LLVM requires the presence of GCC's atomic
+intrinsics in order to support threaded operation. If you need a
+multhreading-capable LLVM on a platform without a suitably modern system
+compiler, consider compiling LLVM and LLVM-GCC in single-threaded mode, and
+using the resultant compiler to build a copy of LLVM with multithreading
+support.
+
+.. _shutdown:
+
+Ending Execution with ``llvm_shutdown()``
+-----------------------------------------
+
+When you are done using the LLVM APIs, you should call ``llvm_shutdown()`` to
+deallocate memory used for internal structures.
+
+.. _managedstatic:
+
+Lazy Initialization with ``ManagedStatic``
+------------------------------------------
+
+``ManagedStatic`` is a utility class in LLVM used to implement static
+initialization of static resources, such as the global type tables. In a
+single-threaded environment, it implements a simple lazy initialization scheme.
+When LLVM is compiled with support for multi-threading, however, it uses
+double-checked locking to implement thread-safe lazy initialization.
+
+.. _llvmcontext:
+
+Achieving Isolation with ``LLVMContext``
+----------------------------------------
+
+``LLVMContext`` is an opaque class in the LLVM API which clients can use to
+operate multiple, isolated instances of LLVM concurrently within the same
+address space. For instance, in a hypothetical compile-server, the compilation
+of an individual translation unit is conceptually independent from all the
+others, and it would be desirable to be able to compile incoming translation
+units concurrently on independent server threads. Fortunately, ``LLVMContext``
+exists to enable just this kind of scenario!
+
+Conceptually, ``LLVMContext`` provides isolation. Every LLVM entity
+(``Module``\ s, ``Value``\ s, ``Type``\ s, ``Constant``\ s, etc.) in LLVM's
+in-memory IR belongs to an ``LLVMContext``. Entities in different contexts
+*cannot* interact with each other: ``Module``\ s in different contexts cannot be
+linked together, ``Function``\ s cannot be added to ``Module``\ s in different
+contexts, etc. What this means is that is is safe to compile on multiple
+threads simultaneously, as long as no two threads operate on entities within the
+same context.
+
+In practice, very few places in the API require the explicit specification of a
+``LLVMContext``, other than the ``Type`` creation/lookup APIs. Because every
+``Type`` carries a reference to its owning context, most other entities can
+determine what context they belong to by looking at their own ``Type``. If you
+are adding new entities to LLVM IR, please try to maintain this interface
+design.
+
+For clients that do *not* require the benefits of isolation, LLVM provides a
+convenience API ``getGlobalContext()``. This returns a global, lazily
+initialized ``LLVMContext`` that may be used in situations where isolation is
+not a concern.
+
+.. _jitthreading:
+
+Threads and the JIT
+-------------------
+
+LLVM's "eager" JIT compiler is safe to use in threaded programs. Multiple
+threads can call ``ExecutionEngine::getPointerToFunction()`` or
+``ExecutionEngine::runFunction()`` concurrently, and multiple threads can run
+code output by the JIT concurrently. The user must still ensure that only one
+thread accesses IR in a given ``LLVMContext`` while another thread might be
+modifying it. One way to do that is to always hold the JIT lock while accessing
+IR outside the JIT (the JIT *modifies* the IR by adding ``CallbackVH``\ s).
+Another way is to only call ``getPointerToFunction()`` from the
+``LLVMContext``'s thread.
+
+When the JIT is configured to compile lazily (using
+``ExecutionEngine::DisableLazyCompilation(false)``), there is currently a `race
+condition <http://llvm.org/bugs/show_bug.cgi?id=5184>`_ in updating call sites
+after a function is lazily-jitted. It's still possible to use the lazy JIT in a
+threaded program if you ensure that only one thread at a time can call any
+particular lazy stub and that the JIT lock guards any IR access, but we suggest
+using only the eager JIT in threaded programs.
+
+.. _advanced:
+
+Advanced Topics
+===============
+
+This section describes some of the advanced or obscure API's that most clients
+do not need to be aware of. These API's tend manage the inner workings of the
+LLVM system, and only need to be accessed in unusual circumstances.
+
+.. _SymbolTable:
+
+The ``ValueSymbolTable`` class
+------------------------------
+
+The ``ValueSymbolTable`` (`doxygen
+<http://llvm.org/doxygen/classllvm_1_1ValueSymbolTable.html>`__) class provides
+a symbol table that the :ref:`Function <c_Function>` and Module_ classes use for
+naming value definitions. The symbol table can provide a name for any Value_.
+
+Note that the ``SymbolTable`` class should not be directly accessed by most
+clients. It should only be used when iteration over the symbol table names
+themselves are required, which is very special purpose. Note that not all LLVM
+Value_\ s have names, and those without names (i.e. they have an empty name) do
+not exist in the symbol table.
+
+Symbol tables support iteration over the values in the symbol table with
+``begin/end/iterator`` and supports querying to see if a specific name is in the
+symbol table (with ``lookup``). The ``ValueSymbolTable`` class exposes no
+public mutator methods, instead, simply call ``setName`` on a value, which will
+autoinsert it into the appropriate symbol table.
+
+.. _UserLayout:
+
+The ``User`` and owned ``Use`` classes' memory layout
+-----------------------------------------------------
+
+The ``User`` (`doxygen <http://llvm.org/doxygen/classllvm_1_1User.html>`__)
+class provides a basis for expressing the ownership of ``User`` towards other
+`Value instance <http://llvm.org/doxygen/classllvm_1_1Value.html>`_\ s. The
+``Use`` (`doxygen <http://llvm.org/doxygen/classllvm_1_1Use.html>`__) helper
+class is employed to do the bookkeeping and to facilitate *O(1)* addition and
+removal.
+
+.. _Use2User:
+
+Interaction and relationship between ``User`` and ``Use`` objects
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+A subclass of ``User`` can choose between incorporating its ``Use`` objects or
+refer to them out-of-line by means of a pointer. A mixed variant (some ``Use``
+s inline others hung off) is impractical and breaks the invariant that the
+``Use`` objects belonging to the same ``User`` form a contiguous array.
+
+We have 2 different layouts in the ``User`` (sub)classes:
+
+* Layout a)
+
+ The ``Use`` object(s) are inside (resp. at fixed offset) of the ``User``
+ object and there are a fixed number of them.
+
+* Layout b)
+
+ The ``Use`` object(s) are referenced by a pointer to an array from the
+ ``User`` object and there may be a variable number of them.
+
+As of v2.4 each layout still possesses a direct pointer to the start of the
+array of ``Use``\ s. Though not mandatory for layout a), we stick to this
+redundancy for the sake of simplicity. The ``User`` object also stores the
+number of ``Use`` objects it has. (Theoretically this information can also be
+calculated given the scheme presented below.)
+
+Special forms of allocation operators (``operator new``) enforce the following
+memory layouts:
+
+* Layout a) is modelled by prepending the ``User`` object by the ``Use[]``
+ array.
+
+ .. code-block:: none
+
+ ...---.---.---.---.-------...
+ | P | P | P | P | User
+ '''---'---'---'---'-------'''
+
+* Layout b) is modelled by pointing at the ``Use[]`` array.
+
+ .. code-block:: none
+
+ .-------...
+ | User
+ '-------'''
+ |
+ v
+ .---.---.---.---...
+ | P | P | P | P |
+ '---'---'---'---'''
+
+*(In the above figures* '``P``' *stands for the* ``Use**`` *that is stored in
+each* ``Use`` *object in the member* ``Use::Prev`` *)*
+
+.. _Waymarking:
+
+The waymarking algorithm
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+Since the ``Use`` objects are deprived of the direct (back)pointer to their
+``User`` objects, there must be a fast and exact method to recover it. This is
+accomplished by the following scheme:
+
+A bit-encoding in the 2 LSBits (least significant bits) of the ``Use::Prev``
+allows to find the start of the ``User`` object:
+
+* ``00`` --- binary digit 0
+
+* ``01`` --- binary digit 1
+
+* ``10`` --- stop and calculate (``s``)
+
+* ``11`` --- full stop (``S``)
+
+Given a ``Use*``, all we have to do is to walk till we get a stop and we either
+have a ``User`` immediately behind or we have to walk to the next stop picking
+up digits and calculating the offset:
+
+.. code-block:: none
+
+ .---.---.---.---.---.---.---.---.---.---.---.---.---.---.---.---.----------------
+ | 1 | s | 1 | 0 | 1 | 0 | s | 1 | 1 | 0 | s | 1 | 1 | s | 1 | S | User (or User*)
+ '---'---'---'---'---'---'---'---'---'---'---'---'---'---'---'---'----------------
+ |+15 |+10 |+6 |+3 |+1
+ | | | | | __>
+ | | | | __________>
+ | | | ______________________>
+ | | ______________________________________>
+ | __________________________________________________________>
+
+Only the significant number of bits need to be stored between the stops, so that
+the *worst case is 20 memory accesses* when there are 1000 ``Use`` objects
+associated with a ``User``.
+
+.. _ReferenceImpl:
+
+Reference implementation
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+The following literate Haskell fragment demonstrates the concept:
+
+.. code-block:: haskell
+
+ > import Test.QuickCheck
+ >
+ > digits :: Int -> [Char] -> [Char]
+ > digits 0 acc = '0' : acc
+ > digits 1 acc = '1' : acc
+ > digits n acc = digits (n `div` 2) $ digits (n `mod` 2) acc
+ >
+ > dist :: Int -> [Char] -> [Char]
+ > dist 0 [] = ['S']
+ > dist 0 acc = acc
+ > dist 1 acc = let r = dist 0 acc in 's' : digits (length r) r
+ > dist n acc = dist (n - 1) $ dist 1 acc
+ >
+ > takeLast n ss = reverse $ take n $ reverse ss
+ >
+ > test = takeLast 40 $ dist 20 []
+ >
+
+Printing <test> gives: ``"1s100000s11010s10100s1111s1010s110s11s1S"``
+
+The reverse algorithm computes the length of the string just by examining a
+certain prefix:
+
+.. code-block:: haskell
+
+ > pref :: [Char] -> Int
+ > pref "S" = 1
+ > pref ('s':'1':rest) = decode 2 1 rest
+ > pref (_:rest) = 1 + pref rest
+ >
+ > decode walk acc ('0':rest) = decode (walk + 1) (acc * 2) rest
+ > decode walk acc ('1':rest) = decode (walk + 1) (acc * 2 + 1) rest
+ > decode walk acc _ = walk + acc
+ >
+
+Now, as expected, printing <pref test> gives ``40``.
+
+We can *quickCheck* this with following property:
+
+.. code-block:: haskell
+
+ > testcase = dist 2000 []
+ > testcaseLength = length testcase
+ >
+ > identityProp n = n > 0 && n <= testcaseLength ==> length arr == pref arr
+ > where arr = takeLast n testcase
+ >
+
+As expected <quickCheck identityProp> gives:
+
+::
+
+ *Main> quickCheck identityProp
+ OK, passed 100 tests.
+
+Let's be a bit more exhaustive:
+
+.. code-block:: haskell
+
+ >
+ > deepCheck p = check (defaultConfig { configMaxTest = 500 }) p
+ >
+
+And here is the result of <deepCheck identityProp>:
+
+::
+
+ *Main> deepCheck identityProp
+ OK, passed 500 tests.
+
+.. _Tagging:
+
+Tagging considerations
+^^^^^^^^^^^^^^^^^^^^^^
+
+To maintain the invariant that the 2 LSBits of each ``Use**`` in ``Use`` never
+change after being set up, setters of ``Use::Prev`` must re-tag the new
+``Use**`` on every modification. Accordingly getters must strip the tag bits.
+
+For layout b) instead of the ``User`` we find a pointer (``User*`` with LSBit
+set). Following this pointer brings us to the ``User``. A portable trick
+ensures that the first bytes of ``User`` (if interpreted as a pointer) never has
+the LSBit set. (Portability is relying on the fact that all known compilers
+place the ``vptr`` in the first word of the instances.)
+
+.. _coreclasses:
+
+The Core LLVM Class Hierarchy Reference
+=======================================
+
+``#include "llvm/IR/Type.h"``
+
+header source: `Type.h <http://llvm.org/doxygen/Type_8h-source.html>`_
+
+doxygen info: `Type Clases <http://llvm.org/doxygen/classllvm_1_1Type.html>`_
+
+The Core LLVM classes are the primary means of representing the program being
+inspected or transformed. The core LLVM classes are defined in header files in
+the ``include/llvm/`` directory, and implemented in the ``lib/VMCore``
+directory.
+
+.. _Type:
+
+The Type class and Derived Types
+--------------------------------
+
+``Type`` is a superclass of all type classes. Every ``Value`` has a ``Type``.
+``Type`` cannot be instantiated directly but only through its subclasses.
+Certain primitive types (``VoidType``, ``LabelType``, ``FloatType`` and
+``DoubleType``) have hidden subclasses. They are hidden because they offer no
+useful functionality beyond what the ``Type`` class offers except to distinguish
+themselves from other subclasses of ``Type``.
+
+All other types are subclasses of ``DerivedType``. Types can be named, but this
+is not a requirement. There exists exactly one instance of a given shape at any
+one time. This allows type equality to be performed with address equality of
+the Type Instance. That is, given two ``Type*`` values, the types are identical
+if the pointers are identical.
+
+.. _m_Type:
+
+Important Public Methods
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+* ``bool isIntegerTy() const``: Returns true for any integer type.
+
+* ``bool isFloatingPointTy()``: Return true if this is one of the five
+ floating point types.
+
+* ``bool isSized()``: Return true if the type has known size. Things
+ that don't have a size are abstract types, labels and void.
+
+.. _derivedtypes:
+
+Important Derived Types
+^^^^^^^^^^^^^^^^^^^^^^^
+
+``IntegerType``
+ Subclass of DerivedType that represents integer types of any bit width. Any
+ bit width between ``IntegerType::MIN_INT_BITS`` (1) and
+ ``IntegerType::MAX_INT_BITS`` (~8 million) can be represented.
+
+ * ``static const IntegerType* get(unsigned NumBits)``: get an integer
+ type of a specific bit width.
+
+ * ``unsigned getBitWidth() const``: Get the bit width of an integer type.
+
+``SequentialType``
+ This is subclassed by ArrayType, PointerType and VectorType.
+
+ * ``const Type * getElementType() const``: Returns the type of each
+ of the elements in the sequential type.
+
+``ArrayType``
+ This is a subclass of SequentialType and defines the interface for array
+ types.
+
+ * ``unsigned getNumElements() const``: Returns the number of elements
+ in the array.
+
+``PointerType``
+ Subclass of SequentialType for pointer types.
+
+``VectorType``
+ Subclass of SequentialType for vector types. A vector type is similar to an
+ ArrayType but is distinguished because it is a first class type whereas
+ ArrayType is not. Vector types are used for vector operations and are usually
+ small vectors of of an integer or floating point type.
+
+``StructType``
+ Subclass of DerivedTypes for struct types.
+
+.. _FunctionType:
+
+``FunctionType``
+ Subclass of DerivedTypes for function types.
+
+ * ``bool isVarArg() const``: Returns true if it's a vararg function.
+
+ * ``const Type * getReturnType() const``: Returns the return type of the
+ function.
+
+ * ``const Type * getParamType (unsigned i)``: Returns the type of the ith
+ parameter.
+
+ * ``const unsigned getNumParams() const``: Returns the number of formal
+ parameters.
+
+.. _Module:
+
+The ``Module`` class
+--------------------
+
+``#include "llvm/IR/Module.h"``
+
+header source: `Module.h <http://llvm.org/doxygen/Module_8h-source.html>`_
+
+doxygen info: `Module Class <http://llvm.org/doxygen/classllvm_1_1Module.html>`_
+
+The ``Module`` class represents the top level structure present in LLVM
+programs. An LLVM module is effectively either a translation unit of the
+original program or a combination of several translation units merged by the
+linker. The ``Module`` class keeps track of a list of :ref:`Function
+<c_Function>`\ s, a list of GlobalVariable_\ s, and a SymbolTable_.
+Additionally, it contains a few helpful member functions that try to make common
+operations easy.
+
+.. _m_Module:
+
+Important Public Members of the ``Module`` class
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+* ``Module::Module(std::string name = "")``
+
+ Constructing a Module_ is easy. You can optionally provide a name for it
+ (probably based on the name of the translation unit).
+
+* | ``Module::iterator`` - Typedef for function list iterator
+ | ``Module::const_iterator`` - Typedef for const_iterator.
+ | ``begin()``, ``end()``, ``size()``, ``empty()``
+
+ These are forwarding methods that make it easy to access the contents of a
+ ``Module`` object's :ref:`Function <c_Function>` list.
+
+* ``Module::FunctionListType &getFunctionList()``
+
+ Returns the list of :ref:`Function <c_Function>`\ s. This is necessary to use
+ when you need to update the list or perform a complex action that doesn't have
+ a forwarding method.
+
+----------------
+
+* | ``Module::global_iterator`` - Typedef for global variable list iterator
+ | ``Module::const_global_iterator`` - Typedef for const_iterator.
+ | ``global_begin()``, ``global_end()``, ``global_size()``, ``global_empty()``
+
+ These are forwarding methods that make it easy to access the contents of a
+ ``Module`` object's GlobalVariable_ list.
+
+* ``Module::GlobalListType &getGlobalList()``
+
+ Returns the list of GlobalVariable_\ s. This is necessary to use when you
+ need to update the list or perform a complex action that doesn't have a
+ forwarding method.
+
+----------------
+
+* ``SymbolTable *getSymbolTable()``
+
+ Return a reference to the SymbolTable_ for this ``Module``.
+
+----------------
+
+* ``Function *getFunction(StringRef Name) const``
+
+ Look up the specified function in the ``Module`` SymbolTable_. If it does not
+ exist, return ``null``.
+
+* ``Function *getOrInsertFunction(const std::string &Name, const FunctionType
+ *T)``
+
+ Look up the specified function in the ``Module`` SymbolTable_. If it does not
+ exist, add an external declaration for the function and return it.
+
+* ``std::string getTypeName(const Type *Ty)``
+
+ If there is at least one entry in the SymbolTable_ for the specified Type_,
+ return it. Otherwise return the empty string.
+
+* ``bool addTypeName(const std::string &Name, const Type *Ty)``
+
+ Insert an entry in the SymbolTable_ mapping ``Name`` to ``Ty``. If there is
+ already an entry for this name, true is returned and the SymbolTable_ is not
+ modified.
+
+.. _Value:
+
+The ``Value`` class
+-------------------
+
+``#include "llvm/IR/Value.h"``
+
+header source: `Value.h <http://llvm.org/doxygen/Value_8h-source.html>`_
+
+doxygen info: `Value Class <http://llvm.org/doxygen/classllvm_1_1Value.html>`_
+
+The ``Value`` class is the most important class in the LLVM Source base. It
+represents a typed value that may be used (among other things) as an operand to
+an instruction. There are many different types of ``Value``\ s, such as
+Constant_\ s, Argument_\ s. Even Instruction_\ s and :ref:`Function
+<c_Function>`\ s are ``Value``\ s.
+
+A particular ``Value`` may be used many times in the LLVM representation for a
+program. For example, an incoming argument to a function (represented with an
+instance of the Argument_ class) is "used" by every instruction in the function
+that references the argument. To keep track of this relationship, the ``Value``
+class keeps a list of all of the ``User``\ s that is using it (the User_ class
+is a base class for all nodes in the LLVM graph that can refer to ``Value``\ s).
+This use list is how LLVM represents def-use information in the program, and is
+accessible through the ``use_*`` methods, shown below.
+
+Because LLVM is a typed representation, every LLVM ``Value`` is typed, and this
+Type_ is available through the ``getType()`` method. In addition, all LLVM
+values can be named. The "name" of the ``Value`` is a symbolic string printed
+in the LLVM code:
+
+.. code-block:: llvm
+
+ %foo = add i32 1, 2
+
+.. _nameWarning:
+
+The name of this instruction is "foo". **NOTE** that the name of any value may
+be missing (an empty string), so names should **ONLY** be used for debugging
+(making the source code easier to read, debugging printouts), they should not be
+used to keep track of values or map between them. For this purpose, use a
+``std::map`` of pointers to the ``Value`` itself instead.
+
+One important aspect of LLVM is that there is no distinction between an SSA
+variable and the operation that produces it. Because of this, any reference to
+the value produced by an instruction (or the value available as an incoming
+argument, for example) is represented as a direct pointer to the instance of the
+class that represents this value. Although this may take some getting used to,
+it simplifies the representation and makes it easier to manipulate.
+
+.. _m_Value:
+
+Important Public Members of the ``Value`` class
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+* | ``Value::use_iterator`` - Typedef for iterator over the use-list
+ | ``Value::const_use_iterator`` - Typedef for const_iterator over the
+ use-list
+ | ``unsigned use_size()`` - Returns the number of users of the value.
+ | ``bool use_empty()`` - Returns true if there are no users.
+ | ``use_iterator use_begin()`` - Get an iterator to the start of the
+ use-list.
+ | ``use_iterator use_end()`` - Get an iterator to the end of the use-list.
+ | ``User *use_back()`` - Returns the last element in the list.
+
+ These methods are the interface to access the def-use information in LLVM.
+ As with all other iterators in LLVM, the naming conventions follow the
+ conventions defined by the STL_.
+
+* ``Type *getType() const``
+ This method returns the Type of the Value.
+
+* | ``bool hasName() const``
+ | ``std::string getName() const``
+ | ``void setName(const std::string &Name)``
+
+ This family of methods is used to access and assign a name to a ``Value``, be
+ aware of the :ref:`precaution above <nameWarning>`.
+
+* ``void replaceAllUsesWith(Value *V)``
+
+ This method traverses the use list of a ``Value`` changing all User_\ s of the
+ current value to refer to "``V``" instead. For example, if you detect that an
+ instruction always produces a constant value (for example through constant
+ folding), you can replace all uses of the instruction with the constant like
+ this:
+
+ .. code-block:: c++
+
+ Inst->replaceAllUsesWith(ConstVal);
+
+.. _User:
+
+The ``User`` class
+------------------
+
+``#include "llvm/IR/User.h"``
+
+header source: `User.h <http://llvm.org/doxygen/User_8h-source.html>`_
+
+doxygen info: `User Class <http://llvm.org/doxygen/classllvm_1_1User.html>`_
+
+Superclass: Value_
+
+The ``User`` class is the common base class of all LLVM nodes that may refer to
+``Value``\ s. It exposes a list of "Operands" that are all of the ``Value``\ s
+that the User is referring to. The ``User`` class itself is a subclass of
+``Value``.
+
+The operands of a ``User`` point directly to the LLVM ``Value`` that it refers
+to. Because LLVM uses Static Single Assignment (SSA) form, there can only be
+one definition referred to, allowing this direct connection. This connection
+provides the use-def information in LLVM.
+
+.. _m_User:
+
+Important Public Members of the ``User`` class
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The ``User`` class exposes the operand list in two ways: through an index access
+interface and through an iterator based interface.
+
+* | ``Value *getOperand(unsigned i)``
+ | ``unsigned getNumOperands()``
+
+ These two methods expose the operands of the ``User`` in a convenient form for
+ direct access.
+
+* | ``User::op_iterator`` - Typedef for iterator over the operand list
+ | ``op_iterator op_begin()`` - Get an iterator to the start of the operand
+ list.
+ | ``op_iterator op_end()`` - Get an iterator to the end of the operand list.
+
+ Together, these methods make up the iterator based interface to the operands
+ of a ``User``.
+
+
+.. _Instruction:
+
+The ``Instruction`` class
+-------------------------
+
+``#include "llvm/IR/Instruction.h"``
+
+header source: `Instruction.h
+<http://llvm.org/doxygen/Instruction_8h-source.html>`_
+
+doxygen info: `Instruction Class
+<http://llvm.org/doxygen/classllvm_1_1Instruction.html>`_
+
+Superclasses: User_, Value_
+
+The ``Instruction`` class is the common base class for all LLVM instructions.
+It provides only a few methods, but is a very commonly used class. The primary
+data tracked by the ``Instruction`` class itself is the opcode (instruction
+type) and the parent BasicBlock_ the ``Instruction`` is embedded into. To
+represent a specific type of instruction, one of many subclasses of
+``Instruction`` are used.
+
+Because the ``Instruction`` class subclasses the User_ class, its operands can
+be accessed in the same way as for other ``User``\ s (with the
+``getOperand()``/``getNumOperands()`` and ``op_begin()``/``op_end()`` methods).
+An important file for the ``Instruction`` class is the ``llvm/Instruction.def``
+file. This file contains some meta-data about the various different types of
+instructions in LLVM. It describes the enum values that are used as opcodes
+(for example ``Instruction::Add`` and ``Instruction::ICmp``), as well as the
+concrete sub-classes of ``Instruction`` that implement the instruction (for
+example BinaryOperator_ and CmpInst_). Unfortunately, the use of macros in this
+file confuses doxygen, so these enum values don't show up correctly in the
+`doxygen output <http://llvm.org/doxygen/classllvm_1_1Instruction.html>`_.
+
+.. _s_Instruction:
+
+Important Subclasses of the ``Instruction`` class
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. _BinaryOperator:
+
+* ``BinaryOperator``
+
+ This subclasses represents all two operand instructions whose operands must be
+ the same type, except for the comparison instructions.
+
+.. _CastInst:
+
+* ``CastInst``
+ This subclass is the parent of the 12 casting instructions. It provides
+ common operations on cast instructions.
+
+.. _CmpInst:
+
+* ``CmpInst``
+
+ This subclass respresents the two comparison instructions,
+ `ICmpInst <LangRef.html#i_icmp>`_ (integer opreands), and
+ `FCmpInst <LangRef.html#i_fcmp>`_ (floating point operands).
+
+.. _TerminatorInst:
+
+* ``TerminatorInst``
+
+ This subclass is the parent of all terminator instructions (those which can
+ terminate a block).
+
+.. _m_Instruction:
+
+Important Public Members of the ``Instruction`` class
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+* ``BasicBlock *getParent()``
+
+ Returns the BasicBlock_ that this
+ ``Instruction`` is embedded into.
+
+* ``bool mayWriteToMemory()``
+
+ Returns true if the instruction writes to memory, i.e. it is a ``call``,
+ ``free``, ``invoke``, or ``store``.
+
+* ``unsigned getOpcode()``
+
+ Returns the opcode for the ``Instruction``.
+
+* ``Instruction *clone() const``
+
+ Returns another instance of the specified instruction, identical in all ways
+ to the original except that the instruction has no parent (i.e. it's not
+ embedded into a BasicBlock_), and it has no name.
+
+.. _Constant:
+
+The ``Constant`` class and subclasses
+-------------------------------------
+
+Constant represents a base class for different types of constants. It is
+subclassed by ConstantInt, ConstantArray, etc. for representing the various
+types of Constants. GlobalValue_ is also a subclass, which represents the
+address of a global variable or function.
+
+.. _s_Constant:
+
+Important Subclasses of Constant
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+* ConstantInt : This subclass of Constant represents an integer constant of
+ any width.
+
+ * ``const APInt& getValue() const``: Returns the underlying
+ value of this constant, an APInt value.
+
+ * ``int64_t getSExtValue() const``: Converts the underlying APInt value to an
+ int64_t via sign extension. If the value (not the bit width) of the APInt
+ is too large to fit in an int64_t, an assertion will result. For this
+ reason, use of this method is discouraged.
+
+ * ``uint64_t getZExtValue() const``: Converts the underlying APInt value
+ to a uint64_t via zero extension. IF the value (not the bit width) of the
+ APInt is too large to fit in a uint64_t, an assertion will result. For this
+ reason, use of this method is discouraged.
+
+ * ``static ConstantInt* get(const APInt& Val)``: Returns the ConstantInt
+ object that represents the value provided by ``Val``. The type is implied
+ as the IntegerType that corresponds to the bit width of ``Val``.
+
+ * ``static ConstantInt* get(const Type *Ty, uint64_t Val)``: Returns the
+ ConstantInt object that represents the value provided by ``Val`` for integer
+ type ``Ty``.
+
+* ConstantFP : This class represents a floating point constant.
+
+ * ``double getValue() const``: Returns the underlying value of this constant.
+
+* ConstantArray : This represents a constant array.
+
+ * ``const std::vector<Use> &getValues() const``: Returns a vector of
+ component constants that makeup this array.
+
+* ConstantStruct : This represents a constant struct.
+
+ * ``const std::vector<Use> &getValues() const``: Returns a vector of
+ component constants that makeup this array.
+
+* GlobalValue : This represents either a global variable or a function. In
+ either case, the value is a constant fixed address (after linking).
+
+.. _GlobalValue:
+
+The ``GlobalValue`` class
+-------------------------
+
+``#include "llvm/IR/GlobalValue.h"``
+
+header source: `GlobalValue.h
+<http://llvm.org/doxygen/GlobalValue_8h-source.html>`_
+
+doxygen info: `GlobalValue Class
+<http://llvm.org/doxygen/classllvm_1_1GlobalValue.html>`_
+
+Superclasses: Constant_, User_, Value_
+
+Global values ( GlobalVariable_\ s or :ref:`Function <c_Function>`\ s) are the
+only LLVM values that are visible in the bodies of all :ref:`Function
+<c_Function>`\ s. Because they are visible at global scope, they are also
+subject to linking with other globals defined in different translation units.
+To control the linking process, ``GlobalValue``\ s know their linkage rules.
+Specifically, ``GlobalValue``\ s know whether they have internal or external
+linkage, as defined by the ``LinkageTypes`` enumeration.
+
+If a ``GlobalValue`` has internal linkage (equivalent to being ``static`` in C),
+it is not visible to code outside the current translation unit, and does not
+participate in linking. If it has external linkage, it is visible to external
+code, and does participate in linking. In addition to linkage information,
+``GlobalValue``\ s keep track of which Module_ they are currently part of.
+
+Because ``GlobalValue``\ s are memory objects, they are always referred to by
+their **address**. As such, the Type_ of a global is always a pointer to its
+contents. It is important to remember this when using the ``GetElementPtrInst``
+instruction because this pointer must be dereferenced first. For example, if
+you have a ``GlobalVariable`` (a subclass of ``GlobalValue)`` that is an array
+of 24 ints, type ``[24 x i32]``, then the ``GlobalVariable`` is a pointer to
+that array. Although the address of the first element of this array and the
+value of the ``GlobalVariable`` are the same, they have different types. The
+``GlobalVariable``'s type is ``[24 x i32]``. The first element's type is
+``i32.`` Because of this, accessing a global value requires you to dereference
+the pointer with ``GetElementPtrInst`` first, then its elements can be accessed.
+This is explained in the `LLVM Language Reference Manual
+<LangRef.html#globalvars>`_.
+
+.. _m_GlobalValue:
+
+Important Public Members of the ``GlobalValue`` class
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+* | ``bool hasInternalLinkage() const``
+ | ``bool hasExternalLinkage() const``
+ | ``void setInternalLinkage(bool HasInternalLinkage)``
+
+ These methods manipulate the linkage characteristics of the ``GlobalValue``.
+
+* ``Module *getParent()``
+
+ This returns the Module_ that the
+ GlobalValue is currently embedded into.
+
+.. _c_Function:
+
+The ``Function`` class
+----------------------
+
+``#include "llvm/IR/Function.h"``
+
+header source: `Function.h <http://llvm.org/doxygen/Function_8h-source.html>`_
+
+doxygen info: `Function Class
+<http://llvm.org/doxygen/classllvm_1_1Function.html>`_
+
+Superclasses: GlobalValue_, Constant_, User_, Value_
+
+The ``Function`` class represents a single procedure in LLVM. It is actually
+one of the more complex classes in the LLVM hierarchy because it must keep track
+of a large amount of data. The ``Function`` class keeps track of a list of
+BasicBlock_\ s, a list of formal Argument_\ s, and a SymbolTable_.
+
+The list of BasicBlock_\ s is the most commonly used part of ``Function``
+objects. The list imposes an implicit ordering of the blocks in the function,
+which indicate how the code will be laid out by the backend. Additionally, the
+first BasicBlock_ is the implicit entry node for the ``Function``. It is not
+legal in LLVM to explicitly branch to this initial block. There are no implicit
+exit nodes, and in fact there may be multiple exit nodes from a single
+``Function``. If the BasicBlock_ list is empty, this indicates that the
+``Function`` is actually a function declaration: the actual body of the function
+hasn't been linked in yet.
+
+In addition to a list of BasicBlock_\ s, the ``Function`` class also keeps track
+of the list of formal Argument_\ s that the function receives. This container
+manages the lifetime of the Argument_ nodes, just like the BasicBlock_ list does
+for the BasicBlock_\ s.
+
+The SymbolTable_ is a very rarely used LLVM feature that is only used when you
+have to look up a value by name. Aside from that, the SymbolTable_ is used
+internally to make sure that there are not conflicts between the names of
+Instruction_\ s, BasicBlock_\ s, or Argument_\ s in the function body.
+
+Note that ``Function`` is a GlobalValue_ and therefore also a Constant_. The
+value of the function is its address (after linking) which is guaranteed to be
+constant.
+
+.. _m_Function:
+
+Important Public Members of the ``Function``
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+* ``Function(const FunctionType *Ty, LinkageTypes Linkage,
+ const std::string &N = "", Module* Parent = 0)``
+
+ Constructor used when you need to create new ``Function``\ s to add the
+ program. The constructor must specify the type of the function to create and
+ what type of linkage the function should have. The FunctionType_ argument
+ specifies the formal arguments and return value for the function. The same
+ FunctionType_ value can be used to create multiple functions. The ``Parent``
+ argument specifies the Module in which the function is defined. If this
+ argument is provided, the function will automatically be inserted into that
+ module's list of functions.
+
+* ``bool isDeclaration()``
+
+ Return whether or not the ``Function`` has a body defined. If the function is
+ "external", it does not have a body, and thus must be resolved by linking with
+ a function defined in a different translation unit.
+
+* | ``Function::iterator`` - Typedef for basic block list iterator
+ | ``Function::const_iterator`` - Typedef for const_iterator.
+ | ``begin()``, ``end()``, ``size()``, ``empty()``
+
+ These are forwarding methods that make it easy to access the contents of a
+ ``Function`` object's BasicBlock_ list.
+
+* ``Function::BasicBlockListType &getBasicBlockList()``
+
+ Returns the list of BasicBlock_\ s. This is necessary to use when you need to
+ update the list or perform a complex action that doesn't have a forwarding
+ method.
+
+* | ``Function::arg_iterator`` - Typedef for the argument list iterator
+ | ``Function::const_arg_iterator`` - Typedef for const_iterator.
+ | ``arg_begin()``, ``arg_end()``, ``arg_size()``, ``arg_empty()``
+
+ These are forwarding methods that make it easy to access the contents of a
+ ``Function`` object's Argument_ list.
+
+* ``Function::ArgumentListType &getArgumentList()``
+
+ Returns the list of Argument_. This is necessary to use when you need to
+ update the list or perform a complex action that doesn't have a forwarding
+ method.
+
+* ``BasicBlock &getEntryBlock()``
+
+ Returns the entry ``BasicBlock`` for the function. Because the entry block
+ for the function is always the first block, this returns the first block of
+ the ``Function``.
+
+* | ``Type *getReturnType()``
+ | ``FunctionType *getFunctionType()``
+
+ This traverses the Type_ of the ``Function`` and returns the return type of
+ the function, or the FunctionType_ of the actual function.
+
+* ``SymbolTable *getSymbolTable()``
+
+ Return a pointer to the SymbolTable_ for this ``Function``.
+
+.. _GlobalVariable:
+
+The ``GlobalVariable`` class
+----------------------------
+
+``#include "llvm/IR/GlobalVariable.h"``
+
+header source: `GlobalVariable.h
+<http://llvm.org/doxygen/GlobalVariable_8h-source.html>`_
+
+doxygen info: `GlobalVariable Class
+<http://llvm.org/doxygen/classllvm_1_1GlobalVariable.html>`_
+
+Superclasses: GlobalValue_, Constant_, User_, Value_
+
+Global variables are represented with the (surprise surprise) ``GlobalVariable``
+class. Like functions, ``GlobalVariable``\ s are also subclasses of
+GlobalValue_, and as such are always referenced by their address (global values
+must live in memory, so their "name" refers to their constant address). See
+GlobalValue_ for more on this. Global variables may have an initial value
+(which must be a Constant_), and if they have an initializer, they may be marked
+as "constant" themselves (indicating that their contents never change at
+runtime).
+
+.. _m_GlobalVariable:
+
+Important Public Members of the ``GlobalVariable`` class
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+* ``GlobalVariable(const Type *Ty, bool isConstant, LinkageTypes &Linkage,
+ Constant *Initializer = 0, const std::string &Name = "", Module* Parent = 0)``
+
+ Create a new global variable of the specified type. If ``isConstant`` is true
+ then the global variable will be marked as unchanging for the program. The
+ Linkage parameter specifies the type of linkage (internal, external, weak,
+ linkonce, appending) for the variable. If the linkage is InternalLinkage,
+ WeakAnyLinkage, WeakODRLinkage, LinkOnceAnyLinkage or LinkOnceODRLinkage, then
+ the resultant global variable will have internal linkage. AppendingLinkage
+ concatenates together all instances (in different translation units) of the
+ variable into a single variable but is only applicable to arrays. See the
+ `LLVM Language Reference <LangRef.html#modulestructure>`_ for further details
+ on linkage types. Optionally an initializer, a name, and the module to put
+ the variable into may be specified for the global variable as well.
+
+* ``bool isConstant() const``
+
+ Returns true if this is a global variable that is known not to be modified at
+ runtime.
+
+* ``bool hasInitializer()``
+
+ Returns true if this ``GlobalVariable`` has an intializer.
+
+* ``Constant *getInitializer()``
+
+ Returns the initial value for a ``GlobalVariable``. It is not legal to call
+ this method if there is no initializer.
+
+.. _BasicBlock:
+
+The ``BasicBlock`` class
+------------------------
+
+``#include "llvm/IR/BasicBlock.h"``
+
+header source: `BasicBlock.h
+<http://llvm.org/doxygen/BasicBlock_8h-source.html>`_
+
+doxygen info: `BasicBlock Class
+<http://llvm.org/doxygen/classllvm_1_1BasicBlock.html>`_
+
+Superclass: Value_
+
+This class represents a single entry single exit section of the code, commonly
+known as a basic block by the compiler community. The ``BasicBlock`` class
+maintains a list of Instruction_\ s, which form the body of the block. Matching
+the language definition, the last element of this list of instructions is always
+a terminator instruction (a subclass of the TerminatorInst_ class).
+
+In addition to tracking the list of instructions that make up the block, the
+``BasicBlock`` class also keeps track of the :ref:`Function <c_Function>` that
+it is embedded into.
+
+Note that ``BasicBlock``\ s themselves are Value_\ s, because they are
+referenced by instructions like branches and can go in the switch tables.
+``BasicBlock``\ s have type ``label``.
+
+.. _m_BasicBlock:
+
+Important Public Members of the ``BasicBlock`` class
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+* ``BasicBlock(const std::string &Name = "", Function *Parent = 0)``
+
+ The ``BasicBlock`` constructor is used to create new basic blocks for
+ insertion into a function. The constructor optionally takes a name for the
+ new block, and a :ref:`Function <c_Function>` to insert it into. If the
+ ``Parent`` parameter is specified, the new ``BasicBlock`` is automatically
+ inserted at the end of the specified :ref:`Function <c_Function>`, if not
+ specified, the BasicBlock must be manually inserted into the :ref:`Function
+ <c_Function>`.
+
+* | ``BasicBlock::iterator`` - Typedef for instruction list iterator
+ | ``BasicBlock::const_iterator`` - Typedef for const_iterator.
+ | ``begin()``, ``end()``, ``front()``, ``back()``,
+ ``size()``, ``empty()``
+ STL-style functions for accessing the instruction list.
+
+ These methods and typedefs are forwarding functions that have the same
+ semantics as the standard library methods of the same names. These methods
+ expose the underlying instruction list of a basic block in a way that is easy
+ to manipulate. To get the full complement of container operations (including
+ operations to update the list), you must use the ``getInstList()`` method.
+
+* ``BasicBlock::InstListType &getInstList()``
+
+ This method is used to get access to the underlying container that actually
+ holds the Instructions. This method must be used when there isn't a
+ forwarding function in the ``BasicBlock`` class for the operation that you
+ would like to perform. Because there are no forwarding functions for
+ "updating" operations, you need to use this if you want to update the contents
+ of a ``BasicBlock``.
+
+* ``Function *getParent()``
+
+ Returns a pointer to :ref:`Function <c_Function>` the block is embedded into,
+ or a null pointer if it is homeless.
+
+* ``TerminatorInst *getTerminator()``
+
+ Returns a pointer to the terminator instruction that appears at the end of the
+ ``BasicBlock``. If there is no terminator instruction, or if the last
+ instruction in the block is not a terminator, then a null pointer is returned.
+
+.. _Argument:
+
+The ``Argument`` class
+----------------------
+
+This subclass of Value defines the interface for incoming formal arguments to a
+function. A Function maintains a list of its formal arguments. An argument has
+a pointer to the parent Function.
+
+
Added: www-releases/trunk/3.6.1/docs/_sources/Projects.txt
URL: http://llvm.org/viewvc/llvm-project/www-releases/trunk/3.6.1/docs/_sources/Projects.txt?rev=238135&view=auto
==============================================================================
--- www-releases/trunk/3.6.1/docs/_sources/Projects.txt (added)
+++ www-releases/trunk/3.6.1/docs/_sources/Projects.txt Mon May 25 08:53:02 2015
@@ -0,0 +1,257 @@
+========================
+Creating an LLVM Project
+========================
+
+.. contents::
+ :local:
+
+Overview
+========
+
+The LLVM build system is designed to facilitate the building of third party
+projects that use LLVM header files, libraries, and tools. In order to use
+these facilities, a ``Makefile`` from a project must do the following things:
+
+* Set ``make`` variables. There are several variables that a ``Makefile`` needs
+ to set to use the LLVM build system:
+
+ * ``PROJECT_NAME`` - The name by which your project is known.
+ * ``LLVM_SRC_ROOT`` - The root of the LLVM source tree.
+ * ``LLVM_OBJ_ROOT`` - The root of the LLVM object tree.
+ * ``PROJ_SRC_ROOT`` - The root of the project's source tree.
+ * ``PROJ_OBJ_ROOT`` - The root of the project's object tree.
+ * ``PROJ_INSTALL_ROOT`` - The root installation directory.
+ * ``LEVEL`` - The relative path from the current directory to the
+ project's root ``($PROJ_OBJ_ROOT)``.
+
+* Include ``Makefile.config`` from ``$(LLVM_OBJ_ROOT)``.
+
+* Include ``Makefile.rules`` from ``$(LLVM_SRC_ROOT)``.
+
+There are two ways that you can set all of these variables:
+
+* You can write your own ``Makefiles`` which hard-code these values.
+
+* You can use the pre-made LLVM sample project. This sample project includes
+ ``Makefiles``, a configure script that can be used to configure the location
+ of LLVM, and the ability to support multiple object directories from a single
+ source directory.
+
+If you want to devise your own build system, studying other projects and LLVM
+``Makefiles`` will probably provide enough information on how to write your own
+``Makefiles``.
+
+Source Tree Layout
+==================
+
+In order to use the LLVM build system, you will want to organize your source
+code so that it can benefit from the build system's features. Mainly, you want
+your source tree layout to look similar to the LLVM source tree layout.
+
+Underneath your top level directory, you should have the following directories:
+
+**lib**
+
+ This subdirectory should contain all of your library source code. For each
+ library that you build, you will have one directory in **lib** that will
+ contain that library's source code.
+
+ Libraries can be object files, archives, or dynamic libraries. The **lib**
+ directory is just a convenient place for libraries as it places them all in
+ a directory from which they can be linked later.
+
+**include**
+
+ This subdirectory should contain any header files that are global to your
+ project. By global, we mean that they are used by more than one library or
+ executable of your project.
+
+ By placing your header files in **include**, they will be found
+ automatically by the LLVM build system. For example, if you have a file
+ **include/jazz/note.h**, then your source files can include it simply with
+ **#include "jazz/note.h"**.
+
+**tools**
+
+ This subdirectory should contain all of your source code for executables.
+ For each program that you build, you will have one directory in **tools**
+ that will contain that program's source code.
+
+**test**
+
+ This subdirectory should contain tests that verify that your code works
+ correctly. Automated tests are especially useful.
+
+ Currently, the LLVM build system provides basic support for tests. The LLVM
+ system provides the following:
+
+* LLVM contains regression tests in ``llvm/test``. These tests are run by the
+ :doc:`Lit <CommandGuide/lit>` testing tool. This test procedure uses ``RUN``
+ lines in the actual test case to determine how to run the test. See the
+ :doc:`TestingGuide` for more details.
+
+* LLVM contains an optional package called ``llvm-test``, which provides
+ benchmarks and programs that are known to compile with the Clang front
+ end. You can use these programs to test your code, gather statistical
+ information, and compare it to the current LLVM performance statistics.
+
+ Currently, there is no way to hook your tests directly into the ``llvm/test``
+ testing harness. You will simply need to find a way to use the source
+ provided within that directory on your own.
+
+Typically, you will want to build your **lib** directory first followed by your
+**tools** directory.
+
+Writing LLVM Style Makefiles
+============================
+
+The LLVM build system provides a convenient way to build libraries and
+executables. Most of your project Makefiles will only need to define a few
+variables. Below is a list of the variables one can set and what they can
+do:
+
+Required Variables
+------------------
+
+``LEVEL``
+
+ This variable is the relative path from this ``Makefile`` to the top
+ directory of your project's source code. For example, if your source code
+ is in ``/tmp/src``, then the ``Makefile`` in ``/tmp/src/jump/high``
+ would set ``LEVEL`` to ``"../.."``.
+
+Variables for Building Subdirectories
+-------------------------------------
+
+``DIRS``
+
+ This is a space separated list of subdirectories that should be built. They
+ will be built, one at a time, in the order specified.
+
+``PARALLEL_DIRS``
+
+ This is a list of directories that can be built in parallel. These will be
+ built after the directories in DIRS have been built.
+
+``OPTIONAL_DIRS``
+
+ This is a list of directories that can be built if they exist, but will not
+ cause an error if they do not exist. They are built serially in the order
+ in which they are listed.
+
+Variables for Building Libraries
+--------------------------------
+
+``LIBRARYNAME``
+
+ This variable contains the base name of the library that will be built. For
+ example, to build a library named ``libsample.a``, ``LIBRARYNAME`` should
+ be set to ``sample``.
+
+``BUILD_ARCHIVE``
+
+ By default, a library is a ``.o`` file that is linked directly into a
+ program. To build an archive (also known as a static library), set the
+ ``BUILD_ARCHIVE`` variable.
+
+``SHARED_LIBRARY``
+
+ If ``SHARED_LIBRARY`` is defined in your Makefile, a shared (or dynamic)
+ library will be built.
+
+Variables for Building Programs
+-------------------------------
+
+``TOOLNAME``
+
+ This variable contains the name of the program that will be built. For
+ example, to build an executable named ``sample``, ``TOOLNAME`` should be set
+ to ``sample``.
+
+``USEDLIBS``
+
+ This variable holds a space separated list of libraries that should be
+ linked into the program. These libraries must be libraries that come from
+ your **lib** directory. The libraries must be specified without their
+ ``lib`` prefix. For example, to link ``libsample.a``, you would set
+ ``USEDLIBS`` to ``sample.a``.
+
+ Note that this works only for statically linked libraries.
+
+``LLVMLIBS``
+
+ This variable holds a space separated list of libraries that should be
+ linked into the program. These libraries must be LLVM libraries. The
+ libraries must be specified without their ``lib`` prefix. For example, to
+ link with a driver that performs an IR transformation you might set
+ ``LLVMLIBS`` to this minimal set of libraries ``LLVMSupport.a LLVMCore.a
+ LLVMBitReader.a LLVMAsmParser.a LLVMAnalysis.a LLVMTransformUtils.a
+ LLVMScalarOpts.a LLVMTarget.a``.
+
+ Note that this works only for statically linked libraries. LLVM is split
+ into a large number of static libraries, and the list of libraries you
+ require may be much longer than the list above. To see a full list of
+ libraries use: ``llvm-config --libs all``. Using ``LINK_COMPONENTS`` as
+ described below, obviates the need to set ``LLVMLIBS``.
+
+``LINK_COMPONENTS``
+
+ This variable holds a space separated list of components that the LLVM
+ ``Makefiles`` pass to the ``llvm-config`` tool to generate a link line for
+ the program. For example, to link with all LLVM libraries use
+ ``LINK_COMPONENTS = all``.
+
+``LIBS``
+
+ To link dynamic libraries, add ``-l<library base name>`` to the ``LIBS``
+ variable. The LLVM build system will look in the same places for dynamic
+ libraries as it does for static libraries.
+
+ For example, to link ``libsample.so``, you would have the following line in
+ your ``Makefile``:
+
+ .. code-block:: makefile
+
+ LIBS += -lsample
+
+Note that ``LIBS`` must occur in the Makefile after the inclusion of
+``Makefile.common``.
+
+Miscellaneous Variables
+-----------------------
+
+``CFLAGS`` & ``CPPFLAGS``
+
+ This variable can be used to add options to the C and C++ compiler,
+ respectively. It is typically used to add options that tell the compiler
+ the location of additional directories to search for header files.
+
+ It is highly suggested that you append to ``CFLAGS`` and ``CPPFLAGS`` as
+ opposed to overwriting them. The master ``Makefiles`` may already have
+ useful options in them that you may not want to overwrite.
+
+Placement of Object Code
+========================
+
+The final location of built libraries and executables will depend upon whether
+you do a ``Debug``, ``Release``, or ``Profile`` build.
+
+Libraries
+
+ All libraries (static and dynamic) will be stored in
+ ``PROJ_OBJ_ROOT/<type>/lib``, where *type* is ``Debug``, ``Release``, or
+ ``Profile`` for a debug, optimized, or profiled build, respectively.
+
+Executables
+
+ All executables will be stored in ``PROJ_OBJ_ROOT/<type>/bin``, where *type*
+ is ``Debug``, ``Release``, or ``Profile`` for a debug, optimized, or
+ profiled build, respectively.
+
+Further Help
+============
+
+If you have any questions or need any help creating an LLVM project, the LLVM
+team would be more than happy to help. You can always post your questions to
+the `LLVM Developers Mailing List
+<http://lists.cs.uiuc.edu/pipermail/llvmdev/>`_.
Added: www-releases/trunk/3.6.1/docs/_sources/R600Usage.txt
URL: http://llvm.org/viewvc/llvm-project/www-releases/trunk/3.6.1/docs/_sources/R600Usage.txt?rev=238135&view=auto
==============================================================================
--- www-releases/trunk/3.6.1/docs/_sources/R600Usage.txt (added)
+++ www-releases/trunk/3.6.1/docs/_sources/R600Usage.txt Mon May 25 08:53:02 2015
@@ -0,0 +1,43 @@
+============================
+User Guide for R600 Back-end
+============================
+
+Introduction
+============
+
+The R600 back-end provides ISA code generation for AMD GPUs, starting with
+the R600 family up until the current Sea Islands (GCN Gen 2).
+
+
+Assembler
+=========
+
+The assembler is currently a work in progress and not yet complete. Below
+are the currently supported features.
+
+SOPP Instructions
+-----------------
+
+Unless otherwise mentioned, all SOPP instructions that with an operand
+accept a integer operand(s) only. No verification is performed on the
+operands, so it is up to the programmer to be familiar with the range
+or acceptable values.
+
+s_waitcnt
+^^^^^^^^^
+
+s_waitcnt accepts named arguments to specify which memory counter(s) to
+wait for.
+
+.. code-block:: nasm
+
+ // Wait for all counters to be 0
+ s_waitcnt 0
+
+ // Equivalent to s_waitcnt 0. Counter names can also be delimited by
+ // '&' or ','.
+ s_waitcnt vmcnt(0) expcnt(0) lgkcmt(0)
+
+ // Wait for vmcnt counter to be 1.
+ s_waitcnt vmcnt(1)
+
Added: www-releases/trunk/3.6.1/docs/_sources/ReleaseNotes.txt
URL: http://llvm.org/viewvc/llvm-project/www-releases/trunk/3.6.1/docs/_sources/ReleaseNotes.txt?rev=238135&view=auto
==============================================================================
--- www-releases/trunk/3.6.1/docs/_sources/ReleaseNotes.txt (added)
+++ www-releases/trunk/3.6.1/docs/_sources/ReleaseNotes.txt Mon May 25 08:53:02 2015
@@ -0,0 +1,671 @@
+======================
+LLVM 3.6 Release Notes
+======================
+
+.. contents::
+ :local:
+
+
+Introduction
+============
+
+This document contains the release notes for the LLVM Compiler Infrastructure,
+release 3.6. Here we describe the status of LLVM, including major improvements
+from the previous release, improvements in various subprojects of LLVM, and
+some of the current users of the code. All LLVM releases may be downloaded
+from the `LLVM releases web site <http://llvm.org/releases/>`_.
+
+For more information about LLVM, including information about the latest
+release, please check out the `main LLVM web site <http://llvm.org/>`_. If you
+have questions or comments, the `LLVM Developer's Mailing List
+<http://lists.cs.uiuc.edu/mailman/listinfo/llvmdev>`_ is a good place to send
+them.
+
+
+Non-comprehensive list of changes in this release
+=================================================
+
+Changes to the MIPS Target
+--------------------------
+
+* Added support for 128-bit integers on 64-bit targets.
+
+* Fixed some remaining N32/N64 calling convention bugs when using small
+ structures on big-endian targets.
+
+* Fixed missing sign-extensions that are required by the N32/N64 calling
+ convention when generating calls to library functions with 32-bit parameters.
+
+* ``-mno-odd-spreg`` is now honoured for vector insertion/extraction operations
+ when using ``-mmsa``.
+
+* Corrected the representation of member function pointers. This makes them
+ usable on microMIPS targets.
+
+* Fixed multiple segfaults and assertions in the disassembler when
+ disassembling instructions that have memory operands.
+
+* Fixed multiple cases of suboptimal code generation involving ``$zero``.
+
+Non-comprehensive list of changes in 3.6.0
+==========================================
+
+.. NOTE
+ For small 1-3 sentence descriptions, just add an entry at the end of
+ this list. If your description won't fit comfortably in one bullet
+ point (e.g. maybe you would like to give an example of the
+ functionality, or simply have a lot to talk about), see the `NOTE` below
+ for adding a new subsection.
+
+* Support for AuroraUX has been removed.
+
+* Added support for a `native object file-based bitcode wrapper format
+ <BitCodeFormat.html#native-object-file>`_.
+
+* Added support for MSVC's ``__vectorcall`` calling convention as
+ ``x86_vectorcallcc``.
+
+.. NOTE
+ If you would like to document a larger change, then you can add a
+ subsection about it right here. You can copy the following boilerplate
+ and un-indent it (the indentation causes it to be inside this comment).
+
+ Special New Feature
+ -------------------
+
+ Makes programs 10x faster by doing Special New Thing.
+
+Prefix data rework
+------------------
+
+The semantics of the ``prefix`` attribute have been changed. Users
+that want the previous ``prefix`` semantics should instead use
+``prologue``. To motivate this change, let's examine the primary
+usecases that these attributes aim to serve,
+
+ 1. Code sanitization metadata (e.g. Clang's undefined behavior
+ sanitizer)
+
+ 2. Function hot-patching: Enable the user to insert ``nop`` operations
+ at the beginning of the function which can later be safely replaced
+ with a call to some instrumentation facility.
+
+ 3. Language runtime metadata: Allow a compiler to insert data for
+ use by the runtime during execution. GHC is one example of a
+ compiler that needs this functionality for its
+ tables-next-to-code functionality.
+
+Previously ``prefix`` served cases (1) and (2) quite well by allowing the user
+to introduce arbitrary data at the entrypoint but before the function
+body. Case (3), however, was poorly handled by this approach as it
+required that prefix data was valid executable code.
+
+In this release the concept of prefix data has been redefined to be
+data which occurs immediately before the function entrypoint (i.e. the
+symbol address). Since prefix data now occurs before the function
+entrypoint, there is no need for the data to be valid code.
+
+The previous notion of prefix data now goes under the name "prologue
+data" to emphasize its duality with the function epilogue.
+
+The intention here is to handle cases (1) and (2) with prologue data and
+case (3) with prefix data. See the language reference for further details
+on the semantics of these attributes.
+
+This refactoring arose out of discussions_ with Reid Kleckner in
+response to a proposal to introduce the notion of symbol offsets to
+enable handling of case (3).
+
+.. _discussions: http://lists.cs.uiuc.edu/pipermail/llvmdev/2014-May/073235.html
+
+
+Metadata is not a Value
+-----------------------
+
+Metadata nodes (``!{...}``) and strings (``!"..."``) are no longer values.
+They have no use-lists, no type, cannot RAUW, and cannot be function-local.
+
+Bridges between Value and Metadata
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+LLVM intrinsics can reference metadata using the ``metadata`` type, and
+metadata nodes can reference constant values.
+
+Function-local metadata is limited to direct arguments to LLVM intrinsics.
+
+Metadata is typeless
+^^^^^^^^^^^^^^^^^^^^
+
+The following old IR:
+
+.. code-block:: llvm
+
+ @g = global i32 0
+
+ define void @foo(i32 %v) {
+ entry:
+ call void @llvm.md(metadata !{i32 %v})
+ call void @llvm.md(metadata !{i32* @global})
+ call void @llvm.md(metadata !0)
+ call void @llvm.md(metadata !{metadata !"string"})
+ call void @llvm.md(metadata !{metadata !{metadata !1, metadata !"string"}})
+ ret void, !bar !1, !baz !2
+ }
+
+ declare void @llvm.md(metadata)
+
+ !0 = metadata !{metadata !1, metadata !2, metadata !3, metadata !"some string"}
+ !1 = metadata !{metadata !2, null, metadata !"other", i32* @global, i32 7}
+ !2 = metadata !{}
+
+should now be written as:
+
+.. code-block:: llvm
+
+ @g = global i32 0
+
+ define void @foo(i32 %v) {
+ entry:
+ call void @llvm.md(metadata i32 %v) ; The only legal place for function-local
+ ; metadata.
+ call void @llvm.md(metadata i32* @global)
+ call void @llvm.md(metadata !0)
+ call void @llvm.md(metadata !{!"string"})
+ call void @llvm.md(metadata !{!{!1, !"string"}})
+ ret void, !bar !1, !baz !2
+ }
+
+ declare void @llvm.md(metadata)
+
+ !0 = !{!1, !2, !3, !"some string"}
+ !1 = !{!2, null, !"other", i32* @global, i32 7}
+ !2 = !{}
+
+Distinct metadata nodes
+^^^^^^^^^^^^^^^^^^^^^^^
+
+Metadata nodes can opt-out of uniquing, using the keyword ``distinct``.
+Distinct nodes are still owned by the context, but are stored in a side table,
+and not uniqued.
+
+In LLVM 3.5, metadata nodes would drop uniquing if an operand changed to
+``null`` during optimizations. This is no longer true. However, if an operand
+change causes a uniquing collision, they become ``distinct``. Unlike LLVM 3.5,
+where serializing to assembly or bitcode would re-unique the nodes, they now
+remain ``distinct``.
+
+The following IR:
+
+.. code-block:: llvm
+
+ !named = !{!0, !1, !2, !3, !4, !5, !6, !7, !8}
+
+ !0 = !{}
+ !1 = !{}
+ !2 = distinct !{}
+ !3 = distinct !{}
+ !4 = !{!0}
+ !5 = distinct !{!0}
+ !6 = !{!4, !{}, !5}
+ !7 = !{!{!0}, !0, !5}
+ !8 = distinct !{!{!0}, !0, !5}
+
+is equivalent to the following:
+
+.. code-block:: llvm
+
+ !named = !{!0, !0, !1, !2, !3, !4, !5, !5, !6}
+
+ !0 = !{}
+ !1 = distinct !{}
+ !2 = distinct !{}
+ !3 = !{!0}
+ !4 = distinct !{!0}
+ !5 = !{!3, !0, !4}
+ !6 = distinct !{!3, !0, !4}
+
+Constructing cyclic graphs
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+During graph construction, if a metadata node transitively references a forward
+declaration, the node itself is considered "unresolved" until the forward
+declaration resolves. An unresolved node can RAUW itself to support uniquing.
+Nodes automatically resolve once all their operands have resolved.
+
+However, cyclic graphs prevent the nodes from resolving. An API client that
+constructs a cyclic graph must call ``resolveCycles()`` to resolve nodes in the
+cycle.
+
+To save self-references from that burden, self-referencing nodes are implicitly
+``distinct``. So the following IR:
+
+.. code-block:: llvm
+
+ !named = !{!0, !1, !2, !3, !4}
+
+ !0 = !{!0}
+ !1 = !{!1}
+ !2 = !{!2, !1}
+ !3 = !{!2, !1}
+ !4 = !{!2, !1}
+
+is equivalent to:
+
+.. code-block:: llvm
+
+ !named = !{!0, !1, !2, !3, !3}
+
+ !0 = distinct !{!0}
+ !1 = distinct !{!1}
+ !2 = distinct !{!2, !1}
+ !3 = !{!2, !1}
+
+MDLocation (aka DebugLoc aka DILocation)
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+There's a new first-class metadata construct called ``MDLocation`` (to be
+followed in subsequent releases by others). It's used for the locations
+referenced by ``!dbg`` metadata attachments.
+
+For example, if an old ``!dbg`` attachment looked like this:
+
+.. code-block:: llvm
+
+ define i32 @foo(i32 %a, i32 %b) {
+ entry:
+ %add = add i32 %a, %b, !dbg !0
+ ret %add, !dbg !1
+ }
+
+ !0 = metadata !{i32 10, i32 3, metadata !2, metadata !1)
+ !1 = metadata !{i32 20, i32 7, metadata !3)
+ !2 = metadata !{...}
+ !3 = metadata !{...}
+
+the new attachment looks like this:
+
+.. code-block:: llvm
+
+ define i32 @foo(i32 %a, i32 %b) {
+ entry:
+ %add = add i32 %a, %b, !dbg !0
+ ret %add, !dbg !1
+ }
+
+ !0 = !MDLocation(line: 10, column: 3, scope: !2, inlinedAt: !1)
+ !1 = !MDLocation(line: 20, column: 7, scope: !3)
+ !2 = !{...}
+ !3 = !{...}
+
+The fields are named, can be reordered, and have sane defaults if left out
+(although ``scope:`` is required).
+
+
+Alias syntax change
+-----------------------
+
+The syntax for aliases is now closer to what is used for global variables
+
+.. code-block:: llvm
+
+ @a = weak global ...
+ @b = weak alias ...
+
+The order of the ``alias`` keyword and the linkage was swapped before.
+
+The old JIT has been removed
+----------------------------
+
+All users should transition to MCJIT.
+
+
+object::Binary doesn't own the file buffer
+-------------------------------------------
+
+It is now just a wrapper, which simplifies using object::Binary with other
+users of the underlying file.
+
+
+IR in object files is now supported
+-----------------------------------
+
+Regular object files can contain IR in a section named ``.llvmbc``.
+
+
+The gold plugin has been rewritten
+----------------------------------
+
+It is now implemented directly on top of lib/Linker instead of ``lib/LTO``.
+The API of ``lib/LTO`` is sufficiently different from gold's view of the
+linking process that some cases could not be conveniently implemented.
+
+The new implementation is also lazier and has a ``save-temps`` option.
+
+
+Change in the representation of lazy loaded funcs
+-------------------------------------------------
+
+Lazy loaded functions are now represented in a way that ``isDeclaration``
+returns the correct answer even before reading the body.
+
+
+The opt option -std-compile-opts was removed
+--------------------------------------------
+
+It was effectively an alias of -O3.
+
+
+Python 2.7 is now required
+--------------------------
+
+This was done to simplify compatibility with python 3.
+
+
+The leak detector has been removed
+----------------------------------
+
+In practice, tools like asan and valgrind were finding way more bugs than
+the old leak detector, so it was removed.
+
+
+New comdat syntax
+-----------------
+
+The syntax of comdats was changed to
+
+.. code-block:: llvm
+
+ $c = comdat any
+ @g = global i32 0, comdat($c)
+ @c = global i32 0, comdat
+
+The version without the parentheses is a syntactic sugar for a comdat with
+the same name as the global.
+
+
+Added support for Win64 unwind information
+------------------------------------------
+
+LLVM now obeys the `Win64 prologue and epilogue conventions
+<https://msdn.microsoft.com/en-us/library/tawsa7cb.aspx>`_ documented by
+Microsoft. Unwind information is also emitted into the .xdata section.
+
+As a result of the ABI-required prologue changes, it is now no longer possible
+to unwind the stack using a standard frame pointer walk on Win64. Instead,
+users should call ``CaptureStackBackTrace``, or implement equivalent
+functionality by consulting the unwind tables present in the binary.
+
+
+Diagnostic infrastructure used by lib/Linker and lib/Bitcode
+------------------------------------------------------------
+
+These libraries now use the diagnostic handler to print errors and warnings.
+This provides better error messages and simpler error handling.
+
+
+The PreserveSource linker mode was removed
+------------------------------------------
+
+It was fairly broken and was removed.
+
+The mode is currently still available in the C API for source
+compatibility, but it doesn't have any effect.
+
+
+Garbage Collection
+------------------
+A new experimental mechanism for describing a garbage collection safepoint was
+added to LLVM. The new mechanism was not complete at the point this release
+was branched so it is recommended that anyone interested in using this
+mechanism track the ongoing development work on tip of tree. The hope is that
+these intrinsics will be ready for general use by 3.7. Documentation can be
+found `here <http://llvm.org/docs/Statepoints.html>`_.
+
+The existing gc.root implementation is still supported and as fully featured
+as it ever was. However, two features from GCStrategy will likely be removed
+in the 3.7 release (performCustomLowering and findCustomSafePoints). If you
+have a use case for either, please mention it on llvm-dev so that it can be
+considered for future development.
+
+We are expecting to migrate away from gc.root in the 3.8 time frame,
+but both mechanisms will be supported in 3.7.
+
+
+Changes to the MIPS Target
+--------------------------
+
+During this release the MIPS target has reached a few major milestones. The
+compiler has gained support for MIPS-II and MIPS-III; become ABI-compatible
+with GCC for big and little endian O32, N32, and N64; and is now able to
+compile the Linux kernel for 32-bit targets. Additionally, LLD now supports
+microMIPS for the O32 ABI on little endian targets, and code generation for
+microMIPS is almost completely passing the test-suite.
+
+
+ABI
+^^^
+
+A large number of bugs have been fixed for big-endian MIPS targets using the
+N32 and N64 ABI's as well as a small number of bugs affecting other ABI's.
+Please note that some of these bugs will still affect LLVM-IR generated by
+LLVM 3.5 since correct code generation depends on appropriate usage of the
+``inreg``, ``signext``, and ``zeroext`` attributes on all function arguments
+and returns.
+
+There are far too many corrections to provide a complete list but here are a
+few notable ones:
+
+* Big-endian N32 and N64 now interlinks successfully with GCC compiled code.
+ Previously this didn't work for the majority of cases.
+
+* The registers used to return a structure containing a single 128-bit floating
+ point member on the N32/N64 ABI's have been changed from those specified by
+ the ABI documentation to match those used by GCC. The documentation specifies
+ that ``$f0`` and ``$f2`` should be used but GCC has used ``$f0`` and ``$f1``
+ for many years.
+
+* Returning a zero-byte struct no longer causes arguments to be read from the
+ wrong registers when using the O32 ABI.
+
+* The exception personality has been changed for 64-bit MIPS targets to
+ eliminate warnings about relocations in a read-only section.
+
+* Incorrect usage of odd-numbered single-precision floating point registers
+ has been fixed when the fastcc calling convention is used with 64-bit FPU's
+ and -mno-odd-spreg.
+
+
+LLVMLinux
+^^^^^^^^^
+
+It is now possible to compile the Linux kernel. This currently requires a small
+number of kernel patches. See the `LLVMLinux project
+<http://llvm.linuxfoundation.org/index.php/Main_Page>`_ for details.
+
+* Added -mabicalls and -mno-abicalls. The implementation may not be complete
+ but works sufficiently well for the Linux kernel.
+
+* Fixed multiple compatibility issues between LLVM's inline assembly support
+ and GCC's.
+
+* Added support for a number of directives used by Linux to the Integrated
+ Assembler.
+
+
+Miscellaneous
+^^^^^^^^^^^^^
+
+* Attempting to disassemble l[wd]c[23], s[wd]c[23], cache, and pref no longer
+ triggers an assertion.
+
+* Added -muclibc and -mglibc to support toolchains that provide both uClibC and
+ GLibC.
+
+* __SIZEOF_INT128__ is no longer defined for 64-bit targets since 128-bit
+ integers do not work at this time for this target.
+
+* Using $t4-$t7 with the N32 and N64 ABI is deprecated when ``-fintegrated-as``
+ is in use and will be removed in LLVM 3.7. These names have never been
+ supported by the GNU Assembler for these ABI's.
+
+
+Changes to the PowerPC Target
+-----------------------------
+
+There are numerous improvements to the PowerPC target in this release:
+
+* LLVM now generates the Vector-Scalar eXtension (VSX) instructions from
+ version 2.06 of the Power ISA, for both big- and little-endian targets.
+
+* LLVM now has a POWER8 instruction scheduling description.
+
+* AddressSanitizer (ASan) support is now fully functional.
+
+* Performance of simple atomic accesses has been greatly improved.
+
+* Atomic fences now use light-weight syncs where possible, again providing
+ significant performance benefit.
+
+* The PowerPC target now supports PIC levels (-fPIC vs. -fpic).
+
+* PPC32 SVR4 now supports small-model PIC.
+
+* Experimental support for the stackmap/patchpoint intrinsics has been added.
+
+* There have been many smaller bug fixes and performance improvements.
+
+
+Changes to the OCaml bindings
+-----------------------------
+
+* The bindings now require OCaml >=4.00.0, ocamlfind,
+ ctypes >=0.3.0 <0.4 and OUnit 2 if tests are enabled.
+
+* The bindings can now be built using cmake as well as autoconf.
+
+* LLVM 3.5 has, unfortunately, shipped a broken Llvm_executionengine
+ implementation. In LLVM 3.6, the bindings now fully support MCJIT,
+ however the interface is reworked from scratch using ctypes
+ and is not backwards compatible.
+
+* Llvm_linker.Mode was removed following the changes in LLVM.
+ This breaks the interface of Llvm_linker.
+
+* All combinations of ocamlc/ocamlc -custom/ocamlopt and shared/static
+ builds of LLVM are now supported.
+
+* Absolute paths are not embedded into the OCaml libraries anymore.
+ Either OCaml >=4.02.2 must be used, which includes an rpath-like $ORIGIN
+ mechanism, or META file must be updated for out-of-tree installations;
+ see r221139.
+
+* As usual, many more functions have been exposed to OCaml.
+
+
+Go bindings
+-----------
+
+* A set of Go bindings based on `gollvm <https://github.com/go-llvm/llvm>`_
+ was introduced in this release.
+
+
+External Open Source Projects Using LLVM 3.6
+============================================
+
+An exciting aspect of LLVM is that it is used as an enabling technology for
+a lot of other language and tools projects. This section lists some of the
+projects that have already been updated to work with LLVM 3.6.
+
+
+Portable Computing Language (pocl)
+----------------------------------
+
+In addition to producing an easily portable open source OpenCL
+implementation, another major goal of `pocl <http://portablecl.org/>`_
+is improving performance portability of OpenCL programs with
+compiler optimizations, reducing the need for target-dependent manual
+optimizations. An important part of pocl is a set of LLVM passes used to
+statically parallelize multiple work-items with the kernel compiler, even in
+the presence of work-group barriers. This enables static parallelization of
+the fine-grained static concurrency in the work groups in multiple ways.
+
+
+TTA-based Co-design Environment (TCE)
+-------------------------------------
+
+`TCE <http://tce.cs.tut.fi/>`_ is a toolset for designing customized
+exposed datapath processors based on the Transport triggered
+architecture (TTA).
+
+The toolset provides a complete co-design flow from C/C++
+programs down to synthesizable VHDL/Verilog and parallel program binaries.
+Processor customization points include the register files, function units,
+supported operations, and the interconnection network.
+
+TCE uses Clang and LLVM for C/C++/OpenCL C language support, target independent
+optimizations and also for parts of code generation. It generates
+new LLVM-based code generators "on the fly" for the designed processors and
+loads them in to the compiler backend as runtime libraries to avoid
+per-target recompilation of larger parts of the compiler chain.
+
+
+Likely
+------
+
+`Likely <http://www.liblikely.org>`_ is an embeddable just-in-time Lisp for
+image recognition and heterogeneous computing. Algorithms are just-in-time
+compiled using LLVM's MCJIT infrastructure to execute on single or
+multi-threaded CPUs and potentially OpenCL SPIR or CUDA enabled GPUs.
+Likely seeks to explore new optimizations for statistical learning
+algorithms by moving them from an offline model generation step to the
+compile-time evaluation of a function (the learning algorithm) with constant
+arguments (the training data).
+
+
+LDC - the LLVM-based D compiler
+-------------------------------
+
+`D <http://dlang.org>`_ is a language with C-like syntax and static typing. It
+pragmatically combines efficiency, control, and modeling power, with safety and
+programmer productivity. D supports powerful concepts like Compile-Time Function
+Execution (CTFE) and Template Meta-Programming, provides an innovative approach
+to concurrency and offers many classical paradigms.
+
+`LDC <http://wiki.dlang.org/LDC>`_ uses the frontend from the reference compiler
+combined with LLVM as backend to produce efficient native code. LDC targets
+x86/x86_64 systems like Linux, OS X, FreeBSD and Windows and also Linux on
+PowerPC (32/64 bit). Ports to other architectures like ARM, AArch64 and MIPS64
+are underway.
+
+
+LLVMSharp & ClangSharp
+----------------------
+
+`LLVMSharp <http://www.llvmsharp.org>`_ and
+`ClangSharp <http://www.clangsharp.org>`_ are type-safe C# bindings for
+Microsoft.NET and Mono that Platform Invoke into the native libraries.
+ClangSharp is self-hosted and is used to generated LLVMSharp using the
+LLVM-C API.
+
+`LLVMSharp Kaleidoscope Tutorials <http://www.llvmsharp.org/Kaleidoscope/>`_
+are instructive examples of writing a compiler in C#, with certain improvements
+like using the visitor pattern to generate LLVM IR.
+
+`ClangSharp PInvoke Generator <http://www.clangsharp.org/PInvoke/>`_ is the
+self-hosting mechanism for LLVM/ClangSharp and is demonstrative of using
+LibClang to generate Platform Invoke (PInvoke) signatures for C APIs.
+
+
+Additional Information
+======================
+
+A wide variety of additional information is available on the `LLVM web page
+<http://llvm.org/>`_, in particular in the `documentation
+<http://llvm.org/docs/>`_ section. The web page also contains versions of the
+API documentation which is up-to-date with the Subversion version of the source
+code. You can access versions of these documents specific to this release by
+going into the ``llvm/docs/`` directory in the LLVM tree.
+
+If you have any questions or comments about LLVM, please feel free to contact
+us via the `mailing lists <http://llvm.org/docs/#maillist>`_.
+
Added: www-releases/trunk/3.6.1/docs/_sources/ReleaseProcess.txt
URL: http://llvm.org/viewvc/llvm-project/www-releases/trunk/3.6.1/docs/_sources/ReleaseProcess.txt?rev=238135&view=auto
==============================================================================
--- www-releases/trunk/3.6.1/docs/_sources/ReleaseProcess.txt (added)
+++ www-releases/trunk/3.6.1/docs/_sources/ReleaseProcess.txt Mon May 25 08:53:02 2015
@@ -0,0 +1,210 @@
+=============================
+How To Validate a New Release
+=============================
+
+.. contents::
+ :local:
+ :depth: 1
+
+Introduction
+============
+
+This document contains information about testing the release candidates that will
+ultimately be the next LLVM release. For more information on how to manage the
+actual release, please refer to :doc:`HowToReleaseLLVM`.
+
+Overview of the Release Process
+-------------------------------
+
+Once the release process starts, the Release Manager will ask for volunteers,
+and it'll be the role of each volunteer to:
+
+* Test and benchmark the previous release
+
+* Test and benchmark each release candidate, comparing to the previous release and candidates
+
+* Identify, reduce and report every regression found during tests and benchmarks
+
+* Make sure the critical bugs get fixed and merged to the next release candidate
+
+Not all bugs or regressions are show-stoppers and it's a bit of a grey area what
+should be fixed before the next candidate and what can wait until the next release.
+
+It'll depend on:
+
+* The severity of the bug, how many people it affects and if it's a regression or a
+ known bug. Known bugs are "unsupported features" and some bugs can be disabled if
+ they have been implemented recently.
+
+* The stage in the release. Less critical bugs should be considered to be fixed between
+ RC1 and RC2, but not so much at the end of it.
+
+* If it's a correctness or a performance regression. Performance regression tends to be
+ taken more lightly than correctness.
+
+.. _scripts:
+
+Scripts
+=======
+
+The scripts are in the ``utils/release`` directory.
+
+test-release.sh
+---------------
+
+This script will check-out, configure and compile LLVM+Clang (+ most add-ons, like ``compiler-rt``,
+``libcxx`` and ``clang-extra-tools``) in three stages, and will test the final stage.
+It'll have installed the final binaries on the Phase3/Releasei(+Asserts) directory, and
+that's the one you should use for the test-suite and other external tests.
+
+To run the script on a specific release candidate run::
+
+ ./test-release.sh \
+ -release 3.3 \
+ -rc 1 \
+ -no-64bit \
+ -test-asserts \
+ -no-compare-files
+
+Each system will require different options. For instance, x86_64 will obviously not need
+``-no-64bit`` while 32-bit systems will, or the script will fail.
+
+The important flags to get right are:
+
+* On the pre-release, you should change ``-rc 1`` to ``-final``. On RC2, change it to ``-rc 2`` and so on.
+
+* On non-release testing, you can use ``-final`` in conjunction with ``-no-checkout``, but you'll have to
+ create the ``final`` directory by hand and link the correct source dir to ``final/llvm.src``.
+
+* For release candidates, you need ``-test-asserts``, or it won't create a "Release+Asserts" directory,
+ which is needed for release testing and benchmarking. This will take twice as long.
+
+* On the final candidate you just need Release builds, and that's the binary directory you'll have to pack.
+
+This script builds three phases of Clang+LLVM twice each (Release and Release+Asserts), so use
+screen or nohup to avoid headaches, since it'll take a long time.
+
+Use the ``--help`` option to see all the options and chose it according to your needs.
+
+
+findRegressions-nightly.py
+--------------------------
+
+TODO
+
+.. _test-suite:
+
+Test Suite
+==========
+
+.. contents::
+ :local:
+
+Follow the `LNT Quick Start Guide <http://llvm.org/docs/lnt/quickstart.html>`__ link on how to set-up the test-suite
+
+The binary location you'll have to use for testing is inside the ``rcN/Phase3/Release+Asserts/llvmCore-REL-RC.install``.
+Link that directory to an easier location and run the test-suite.
+
+An example on the run command line, assuming you created a link from the correct
+install directory to ``~/devel/llvm/install``::
+
+ ./sandbox/bin/python sandbox/bin/lnt runtest \
+ nt \
+ -j4 \
+ --sandbox sandbox \
+ --test-suite ~/devel/llvm/test/test-suite \
+ --cc ~/devel/llvm/install/bin/clang \
+ --cxx ~/devel/llvm/install/bin/clang++
+
+It should have no new regressions, compared to the previous release or release candidate. You don't need to fix
+all the bugs in the test-suite, since they're not necessarily meant to pass on all architectures all the time. This is
+due to the nature of the result checking, which relies on direct comparison, and most of the time, the failures are
+related to bad output checking, rather than bad code generation.
+
+If the errors are in LLVM itself, please report every single regression found as blocker, and all the other bugs
+as important, but not necessarily blocking the release to proceed. They can be set as "known failures" and to be
+fix on a future date.
+
+.. _pre-release-process:
+
+Pre-Release Process
+===================
+
+.. contents::
+ :local:
+
+When the release process is announced on the mailing list, you should prepare
+for the testing, by applying the same testing you'll do on the release candidates,
+on the previous release.
+
+You should:
+
+* Download the previous release sources from http://llvm.org/releases/download.html.
+
+* Run the test-release.sh script on ``final`` mode (change ``-rc 1`` to ``-final``).
+
+* Once all three stages are done, it'll test the final stage.
+
+* Using the ``Phase3/Release+Asserts/llvmCore-MAJ.MIN-final.install`` base, run the test-suite.
+
+If the final phase's ``make check-all`` failed, it's a good idea to also test the
+intermediate stages by going on the obj directory and running ``make check-all`` to find
+if there's at least one stage that passes (helps when reducing the error for bug report
+purposes).
+
+.. _release-process:
+
+Release Process
+===============
+
+.. contents::
+ :local:
+
+When the Release Manager sends you the release candidate, download all sources,
+unzip on the same directory (there will be sym-links from the appropriate places
+to them), and run the release test as above.
+
+You should:
+
+* Download the current candidate sources from where the release manager points you
+ (ex. http://llvm.org/pre-releases/3.3/rc1/).
+
+* Repeat the steps above with ``-rc 1``, ``-rc 2`` etc modes and run the test-suite
+ the same way.
+
+* Compare the results, report all errors on Bugzilla and publish the binary blob
+ where the release manager can grab it.
+
+Once the release manages announces that the latest candidate is the good one, you
+have to pack the ``Release`` (no Asserts) install directory on ``Phase3`` and that
+will be the official binary.
+
+* Rename (or link) ``clang+llvm-REL-ARCH-ENV`` to the .install directory
+
+* Tar that into the same name with ``.tar.gz`` extensioan from outside the directory
+
+* Make it available for the release manager to download
+
+.. _bug-reporting:
+
+Bug Reporting Process
+=====================
+
+.. contents::
+ :local:
+
+If you found regressions or failures when comparing a release candidate with the
+previous release, follow the rules below:
+
+* Critical bugs on compilation should be fixed as soon as possible, possibly before
+ releasing the binary blobs.
+
+* Check-all tests should be fixed before the next release candidate, but can wait
+ until the test-suite run is finished.
+
+* Bugs in the test suite or unimportant check-all tests can be fixed in between
+ release candidates.
+
+* New features or recent big changes, when close to the release, should have done
+ in a way that it's easy to disable. If they misbehave, prefer disabling them than
+ releasing an unstable (but untested) binary package.
Added: www-releases/trunk/3.6.1/docs/_sources/SegmentedStacks.txt
URL: http://llvm.org/viewvc/llvm-project/www-releases/trunk/3.6.1/docs/_sources/SegmentedStacks.txt?rev=238135&view=auto
==============================================================================
--- www-releases/trunk/3.6.1/docs/_sources/SegmentedStacks.txt (added)
+++ www-releases/trunk/3.6.1/docs/_sources/SegmentedStacks.txt Mon May 25 08:53:02 2015
@@ -0,0 +1,77 @@
+========================
+Segmented Stacks in LLVM
+========================
+
+.. contents::
+ :local:
+
+Introduction
+============
+
+Segmented stack allows stack space to be allocated incrementally than as a
+monolithic chunk (of some worst case size) at thread initialization. This is
+done by allocating stack blocks (henceforth called *stacklets*) and linking them
+into a doubly linked list. The function prologue is responsible for checking if
+the current stacklet has enough space for the function to execute; and if not,
+call into the libgcc runtime to allocate more stack space. Segmented stacks are
+enabled with the ``"split-stack"`` attribute on LLVM functions.
+
+The runtime functionality is `already there in libgcc
+<http://gcc.gnu.org/wiki/SplitStacks>`_.
+
+Implementation Details
+======================
+
+.. _allocating stacklets:
+
+Allocating Stacklets
+--------------------
+
+As mentioned above, the function prologue checks if the current stacklet has
+enough space. The current approach is to use a slot in the TCB to store the
+current stack limit (minus the amount of space needed to allocate a new block) -
+this slot's offset is again dictated by ``libgcc``. The generated
+assembly looks like this on x86-64:
+
+.. code-block:: nasm
+
+ leaq -8(%rsp), %r10
+ cmpq %fs:112, %r10
+ jg .LBB0_2
+
+ # More stack space needs to be allocated
+ movabsq $8, %r10 # The amount of space needed
+ movabsq $0, %r11 # The total size of arguments passed on stack
+ callq __morestack
+ ret # The reason for this extra return is explained below
+ .LBB0_2:
+ # Usual prologue continues here
+
+The size of function arguments on the stack needs to be passed to
+``__morestack`` (this function is implemented in ``libgcc``) since that number
+of bytes has to be copied from the previous stacklet to the current one. This is
+so that SP (and FP) relative addressing of function arguments work as expected.
+
+The unusual ``ret`` is needed to have the function which made a call to
+``__morestack`` return correctly. ``__morestack``, instead of returning, calls
+into ``.LBB0_2``. This is possible since both, the size of the ``ret``
+instruction and the PC of call to ``__morestack`` are known. When the function
+body returns, control is transferred back to ``__morestack``. ``__morestack``
+then de-allocates the new stacklet, restores the correct SP value, and does a
+second return, which returns control to the correct caller.
+
+Variable Sized Allocas
+----------------------
+
+The section on `allocating stacklets`_ automatically assumes that every stack
+frame will be of fixed size. However, LLVM allows the use of the ``llvm.alloca``
+intrinsic to allocate dynamically sized blocks of memory on the stack. When
+faced with such a variable-sized alloca, code is generated to:
+
+* Check if the current stacklet has enough space. If yes, just bump the SP, like
+ in the normal case.
+* If not, generate a call to ``libgcc``, which allocates the memory from the
+ heap.
+
+The memory allocated from the heap is linked into a list in the current
+stacklet, and freed along with the same. This prevents a memory leak.
Added: www-releases/trunk/3.6.1/docs/_sources/SourceLevelDebugging.txt
URL: http://llvm.org/viewvc/llvm-project/www-releases/trunk/3.6.1/docs/_sources/SourceLevelDebugging.txt?rev=238135&view=auto
==============================================================================
--- www-releases/trunk/3.6.1/docs/_sources/SourceLevelDebugging.txt (added)
+++ www-releases/trunk/3.6.1/docs/_sources/SourceLevelDebugging.txt Mon May 25 08:53:02 2015
@@ -0,0 +1,1897 @@
+================================
+Source Level Debugging with LLVM
+================================
+
+.. contents::
+ :local:
+
+Introduction
+============
+
+This document is the central repository for all information pertaining to debug
+information in LLVM. It describes the :ref:`actual format that the LLVM debug
+information takes <format>`, which is useful for those interested in creating
+front-ends or dealing directly with the information. Further, this document
+provides specific examples of what debug information for C/C++ looks like.
+
+Philosophy behind LLVM debugging information
+--------------------------------------------
+
+The idea of the LLVM debugging information is to capture how the important
+pieces of the source-language's Abstract Syntax Tree map onto LLVM code.
+Several design aspects have shaped the solution that appears here. The
+important ones are:
+
+* Debugging information should have very little impact on the rest of the
+ compiler. No transformations, analyses, or code generators should need to
+ be modified because of debugging information.
+
+* LLVM optimizations should interact in :ref:`well-defined and easily described
+ ways <intro_debugopt>` with the debugging information.
+
+* Because LLVM is designed to support arbitrary programming languages,
+ LLVM-to-LLVM tools should not need to know anything about the semantics of
+ the source-level-language.
+
+* Source-level languages are often **widely** different from one another.
+ LLVM should not put any restrictions of the flavor of the source-language,
+ and the debugging information should work with any language.
+
+* With code generator support, it should be possible to use an LLVM compiler
+ to compile a program to native machine code and standard debugging
+ formats. This allows compatibility with traditional machine-code level
+ debuggers, like GDB or DBX.
+
+The approach used by the LLVM implementation is to use a small set of
+:ref:`intrinsic functions <format_common_intrinsics>` to define a mapping
+between LLVM program objects and the source-level objects. The description of
+the source-level program is maintained in LLVM metadata in an
+:ref:`implementation-defined format <ccxx_frontend>` (the C/C++ front-end
+currently uses working draft 7 of the `DWARF 3 standard
+<http://www.eagercon.com/dwarf/dwarf3std.htm>`_).
+
+When a program is being debugged, a debugger interacts with the user and turns
+the stored debug information into source-language specific information. As
+such, a debugger must be aware of the source-language, and is thus tied to a
+specific language or family of languages.
+
+Debug information consumers
+---------------------------
+
+The role of debug information is to provide meta information normally stripped
+away during the compilation process. This meta information provides an LLVM
+user a relationship between generated code and the original program source
+code.
+
+Currently, debug information is consumed by DwarfDebug to produce dwarf
+information used by the gdb debugger. Other targets could use the same
+information to produce stabs or other debug forms.
+
+It would also be reasonable to use debug information to feed profiling tools
+for analysis of generated code, or, tools for reconstructing the original
+source from generated code.
+
+TODO - expound a bit more.
+
+.. _intro_debugopt:
+
+Debugging optimized code
+------------------------
+
+An extremely high priority of LLVM debugging information is to make it interact
+well with optimizations and analysis. In particular, the LLVM debug
+information provides the following guarantees:
+
+* LLVM debug information **always provides information to accurately read
+ the source-level state of the program**, regardless of which LLVM
+ optimizations have been run, and without any modification to the
+ optimizations themselves. However, some optimizations may impact the
+ ability to modify the current state of the program with a debugger, such
+ as setting program variables, or calling functions that have been
+ deleted.
+
+* As desired, LLVM optimizations can be upgraded to be aware of the LLVM
+ debugging information, allowing them to update the debugging information
+ as they perform aggressive optimizations. This means that, with effort,
+ the LLVM optimizers could optimize debug code just as well as non-debug
+ code.
+
+* LLVM debug information does not prevent optimizations from
+ happening (for example inlining, basic block reordering/merging/cleanup,
+ tail duplication, etc).
+
+* LLVM debug information is automatically optimized along with the rest of
+ the program, using existing facilities. For example, duplicate
+ information is automatically merged by the linker, and unused information
+ is automatically removed.
+
+Basically, the debug information allows you to compile a program with
+"``-O0 -g``" and get full debug information, allowing you to arbitrarily modify
+the program as it executes from a debugger. Compiling a program with
+"``-O3 -g``" gives you full debug information that is always available and
+accurate for reading (e.g., you get accurate stack traces despite tail call
+elimination and inlining), but you might lose the ability to modify the program
+and call functions where were optimized out of the program, or inlined away
+completely.
+
+:ref:`LLVM test suite <test-suite-quickstart>` provides a framework to test
+optimizer's handling of debugging information. It can be run like this:
+
+.. code-block:: bash
+
+ % cd llvm/projects/test-suite/MultiSource/Benchmarks # or some other level
+ % make TEST=dbgopt
+
+This will test impact of debugging information on optimization passes. If
+debugging information influences optimization passes then it will be reported
+as a failure. See :doc:`TestingGuide` for more information on LLVM test
+infrastructure and how to run various tests.
+
+.. _format:
+
+Debugging information format
+============================
+
+LLVM debugging information has been carefully designed to make it possible for
+the optimizer to optimize the program and debugging information without
+necessarily having to know anything about debugging information. In
+particular, the use of metadata avoids duplicated debugging information from
+the beginning, and the global dead code elimination pass automatically deletes
+debugging information for a function if it decides to delete the function.
+
+To do this, most of the debugging information (descriptors for types,
+variables, functions, source files, etc) is inserted by the language front-end
+in the form of LLVM metadata.
+
+Debug information is designed to be agnostic about the target debugger and
+debugging information representation (e.g. DWARF/Stabs/etc). It uses a generic
+pass to decode the information that represents variables, types, functions,
+namespaces, etc: this allows for arbitrary source-language semantics and
+type-systems to be used, as long as there is a module written for the target
+debugger to interpret the information.
+
+To provide basic functionality, the LLVM debugger does have to make some
+assumptions about the source-level language being debugged, though it keeps
+these to a minimum. The only common features that the LLVM debugger assumes
+exist are :ref:`source files <format_files>`, and :ref:`program objects
+<format_global_variables>`. These abstract objects are used by a debugger to
+form stack traces, show information about local variables, etc.
+
+This section of the documentation first describes the representation aspects
+common to any source-language. :ref:`ccxx_frontend` describes the data layout
+conventions used by the C and C++ front-ends.
+
+Debug information descriptors
+-----------------------------
+
+In consideration of the complexity and volume of debug information, LLVM
+provides a specification for well formed debug descriptors.
+
+Consumers of LLVM debug information expect the descriptors for program objects
+to start in a canonical format, but the descriptors can include additional
+information appended at the end that is source-language specific. All debugging
+information objects start with a tag to indicate what type of object it is.
+The source-language is allowed to define its own objects, by using unreserved
+tag numbers. We recommend using with tags in the range 0x1000 through 0x2000
+(there is a defined ``enum DW_TAG_user_base = 0x1000``.)
+
+The fields of debug descriptors used internally by LLVM are restricted to only
+the simple data types ``i32``, ``i1``, ``float``, ``double``, ``mdstring`` and
+``mdnode``.
+
+.. code-block:: llvm
+
+ !1 = metadata !{
+ i32, ;; A tag
+ ...
+ }
+
+Most of the string and integer fields in descriptors are packed into a single,
+null-separated ``mdstring``. The first field of the header is always an
+``i32`` containing the DWARF tag value identifying the content of the
+descriptor.
+
+For clarity of definition in this document, these header fields are described
+below split inside an imaginary ``DIHeader`` construct. This is invalid
+assembly syntax. In valid IR, these fields are stringified and concatenated,
+separated by ``\00``.
+
+The details of the various descriptors follow.
+
+Compile unit descriptors
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. code-block:: llvm
+
+ !0 = metadata !{
+ DIHeader(
+ i32, ;; Tag = 17 (DW_TAG_compile_unit)
+ i32, ;; DWARF language identifier (ex. DW_LANG_C89)
+ mdstring, ;; Producer (ex. "4.0.1 LLVM (LLVM research group)")
+ i1, ;; True if this is optimized.
+ mdstring, ;; Flags
+ i32, ;; Runtime version
+ mdstring, ;; Split debug filename
+ i32 ;; Debug info emission kind (1 = Full Debug Info, 2 = Line Tables Only)
+ ),
+ metadata, ;; Source directory (including trailing slash) & file pair
+ metadata, ;; List of enums types
+ metadata, ;; List of retained types
+ metadata, ;; List of subprograms
+ metadata, ;; List of global variables
+ metadata ;; List of imported entities
+ }
+
+These descriptors contain a source language ID for the file (we use the DWARF
+3.0 ID numbers, such as ``DW_LANG_C89``, ``DW_LANG_C_plus_plus``,
+``DW_LANG_Cobol74``, etc), a reference to a metadata node containing a pair of
+strings for the source file name and the working directory, as well as an
+identifier string for the compiler that produced it.
+
+Compile unit descriptors provide the root context for objects declared in a
+specific compilation unit. File descriptors are defined using this context.
+These descriptors are collected by a named metadata ``!llvm.dbg.cu``. They
+keep track of subprograms, global variables, type information, and imported
+entities (declarations and namespaces).
+
+.. _format_files:
+
+File descriptors
+^^^^^^^^^^^^^^^^
+
+.. code-block:: llvm
+
+ !0 = metadata !{
+ DIHeader(
+ i32 ;; Tag = 41 (DW_TAG_file_type)
+ ),
+ metadata ;; Source directory (including trailing slash) & file pair
+ }
+
+These descriptors contain information for a file. Global variables and top
+level functions would be defined using this context. File descriptors also
+provide context for source line correspondence.
+
+Each input file is encoded as a separate file descriptor in LLVM debugging
+information output.
+
+.. _format_global_variables:
+
+Global variable descriptors
+^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. code-block:: llvm
+
+ !1 = metadata !{
+ DIHeader(
+ i32, ;; Tag = 52 (DW_TAG_variable)
+ mdstring, ;; Name
+ mdstring, ;; Display name (fully qualified C++ name)
+ mdstring, ;; MIPS linkage name (for C++)
+ i32, ;; Line number where defined
+ i1, ;; True if the global is local to compile unit (static)
+ i1 ;; True if the global is defined in the compile unit (not extern)
+ ),
+ metadata, ;; Reference to context descriptor
+ metadata, ;; Reference to file where defined
+ metadata, ;; Reference to type descriptor
+ {}*, ;; Reference to the global variable
+ metadata, ;; The static member declaration, if any
+ }
+
+These descriptors provide debug information about global variables. They
+provide details such as name, type and where the variable is defined. All
+global variables are collected inside the named metadata ``!llvm.dbg.cu``.
+
+.. _format_subprograms:
+
+Subprogram descriptors
+^^^^^^^^^^^^^^^^^^^^^^
+
+.. code-block:: llvm
+
+ !2 = metadata !{
+ DIHeader(
+ i32, ;; Tag = 46 (DW_TAG_subprogram)
+ mdstring, ;; Name
+ mdstring, ;; Display name (fully qualified C++ name)
+ mdstring, ;; MIPS linkage name (for C++)
+ i32, ;; Line number where defined
+ i1, ;; True if the global is local to compile unit (static)
+ i1, ;; True if the global is defined in the compile unit (not extern)
+ i32, ;; Virtuality, e.g. dwarf::DW_VIRTUALITY__virtual
+ i32, ;; Index into a virtual function
+ i32, ;; Flags - Artificial, Private, Protected, Explicit, Prototyped.
+ i1, ;; isOptimized
+ i32 ;; Line number where the scope of the subprogram begins
+ ),
+ metadata, ;; Source directory (including trailing slash) & file pair
+ metadata, ;; Reference to context descriptor
+ metadata, ;; Reference to type descriptor
+ metadata, ;; indicates which base type contains the vtable pointer for the
+ ;; derived class
+ {}*, ;; Reference to the LLVM function
+ metadata, ;; Lists function template parameters
+ metadata, ;; Function declaration descriptor
+ metadata ;; List of function variables
+ }
+
+These descriptors provide debug information about functions, methods and
+subprograms. They provide details such as name, return types and the source
+location where the subprogram is defined.
+
+Block descriptors
+^^^^^^^^^^^^^^^^^
+
+.. code-block:: llvm
+
+ !3 = metadata !{
+ DIHeader(
+ i32, ;; Tag = 11 (DW_TAG_lexical_block)
+ i32, ;; Line number
+ i32, ;; Column number
+ i32 ;; Unique ID to identify blocks from a template function
+ ),
+ metadata, ;; Source directory (including trailing slash) & file pair
+ metadata ;; Reference to context descriptor
+ }
+
+This descriptor provides debug information about nested blocks within a
+subprogram. The line number and column numbers are used to dinstinguish two
+lexical blocks at same depth.
+
+.. code-block:: llvm
+
+ !3 = metadata !{
+ DIHeader(
+ i32, ;; Tag = 11 (DW_TAG_lexical_block)
+ i32 ;; DWARF path discriminator value
+ ),
+ metadata, ;; Source directory (including trailing slash) & file pair
+ metadata ;; Reference to the scope we're annotating with a file change
+ }
+
+This descriptor provides a wrapper around a lexical scope to handle file
+changes in the middle of a lexical block.
+
+.. _format_basic_type:
+
+Basic type descriptors
+^^^^^^^^^^^^^^^^^^^^^^
+
+.. code-block:: llvm
+
+ !4 = metadata !{
+ DIHeader(
+ i32, ;; Tag = 36 (DW_TAG_base_type)
+ mdstring, ;; Name (may be "" for anonymous types)
+ i32, ;; Line number where defined (may be 0)
+ i64, ;; Size in bits
+ i64, ;; Alignment in bits
+ i64, ;; Offset in bits
+ i32, ;; Flags
+ i32 ;; DWARF type encoding
+ ),
+ metadata, ;; Source directory (including trailing slash) & file pair (may be null)
+ metadata ;; Reference to context
+ }
+
+These descriptors define primitive types used in the code. Example ``int``,
+``bool`` and ``float``. The context provides the scope of the type, which is
+usually the top level. Since basic types are not usually user defined the
+context and line number can be left as NULL and 0. The size, alignment and
+offset are expressed in bits and can be 64 bit values. The alignment is used
+to round the offset when embedded in a :ref:`composite type
+<format_composite_type>` (example to keep float doubles on 64 bit boundaries).
+The offset is the bit offset if embedded in a :ref:`composite type
+<format_composite_type>`.
+
+The type encoding provides the details of the type. The values are typically
+one of the following:
+
+.. code-block:: llvm
+
+ DW_ATE_address = 1
+ DW_ATE_boolean = 2
+ DW_ATE_float = 4
+ DW_ATE_signed = 5
+ DW_ATE_signed_char = 6
+ DW_ATE_unsigned = 7
+ DW_ATE_unsigned_char = 8
+
+.. _format_derived_type:
+
+Derived type descriptors
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. code-block:: llvm
+
+ !5 = metadata !{
+ DIHeader(
+ i32, ;; Tag (see below)
+ mdstring, ;; Name (may be "" for anonymous types)
+ i32, ;; Line number where defined (may be 0)
+ i64, ;; Size in bits
+ i64, ;; Alignment in bits
+ i64, ;; Offset in bits
+ i32 ;; Flags to encode attributes, e.g. private
+ ),
+ metadata, ;; Source directory (including trailing slash) & file pair (may be null)
+ metadata, ;; Reference to context
+ metadata, ;; Reference to type derived from
+ metadata ;; (optional) Objective C property node
+ }
+
+These descriptors are used to define types derived from other types. The value
+of the tag varies depending on the meaning. The following are possible tag
+values:
+
+.. code-block:: llvm
+
+ DW_TAG_formal_parameter = 5
+ DW_TAG_member = 13
+ DW_TAG_pointer_type = 15
+ DW_TAG_reference_type = 16
+ DW_TAG_typedef = 22
+ DW_TAG_ptr_to_member_type = 31
+ DW_TAG_const_type = 38
+ DW_TAG_volatile_type = 53
+ DW_TAG_restrict_type = 55
+
+``DW_TAG_member`` is used to define a member of a :ref:`composite type
+<format_composite_type>` or :ref:`subprogram <format_subprograms>`. The type
+of the member is the :ref:`derived type <format_derived_type>`.
+``DW_TAG_formal_parameter`` is used to define a member which is a formal
+argument of a subprogram.
+
+``DW_TAG_typedef`` is used to provide a name for the derived type.
+
+``DW_TAG_pointer_type``, ``DW_TAG_reference_type``, ``DW_TAG_const_type``,
+``DW_TAG_volatile_type`` and ``DW_TAG_restrict_type`` are used to qualify the
+:ref:`derived type <format_derived_type>`.
+
+:ref:`Derived type <format_derived_type>` location can be determined from the
+context and line number. The size, alignment and offset are expressed in bits
+and can be 64 bit values. The alignment is used to round the offset when
+embedded in a :ref:`composite type <format_composite_type>` (example to keep
+float doubles on 64 bit boundaries.) The offset is the bit offset if embedded
+in a :ref:`composite type <format_composite_type>`.
+
+Note that the ``void *`` type is expressed as a type derived from NULL.
+
+.. _format_composite_type:
+
+Composite type descriptors
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. code-block:: llvm
+
+ !6 = metadata !{
+ DIHeader(
+ i32, ;; Tag (see below)
+ mdstring, ;; Name (may be "" for anonymous types)
+ i32, ;; Line number where defined (may be 0)
+ i64, ;; Size in bits
+ i64, ;; Alignment in bits
+ i64, ;; Offset in bits
+ i32, ;; Flags
+ i32 ;; Runtime languages
+ ),
+ metadata, ;; Source directory (including trailing slash) & file pair (may be null)
+ metadata, ;; Reference to context
+ metadata, ;; Reference to type derived from
+ metadata, ;; Reference to array of member descriptors
+ metadata, ;; Base type containing the vtable pointer for this type
+ metadata, ;; Template parameters
+ mdstring ;; A unique identifier for type uniquing purpose (may be null)
+ }
+
+These descriptors are used to define types that are composed of 0 or more
+elements. The value of the tag varies depending on the meaning. The following
+are possible tag values:
+
+.. code-block:: llvm
+
+ DW_TAG_array_type = 1
+ DW_TAG_enumeration_type = 4
+ DW_TAG_structure_type = 19
+ DW_TAG_union_type = 23
+ DW_TAG_subroutine_type = 21
+ DW_TAG_inheritance = 28
+
+The vector flag indicates that an array type is a native packed vector.
+
+The members of array types (tag = ``DW_TAG_array_type``) are
+:ref:`subrange descriptors <format_subrange>`, each
+representing the range of subscripts at that level of indexing.
+
+The members of enumeration types (tag = ``DW_TAG_enumeration_type``) are
+:ref:`enumerator descriptors <format_enumerator>`, each representing the
+definition of enumeration value for the set. All enumeration type descriptors
+are collected inside the named metadata ``!llvm.dbg.cu``.
+
+The members of structure (tag = ``DW_TAG_structure_type``) or union (tag =
+``DW_TAG_union_type``) types are any one of the :ref:`basic
+<format_basic_type>`, :ref:`derived <format_derived_type>` or :ref:`composite
+<format_composite_type>` type descriptors, each representing a field member of
+the structure or union.
+
+For C++ classes (tag = ``DW_TAG_structure_type``), member descriptors provide
+information about base classes, static members and member functions. If a
+member is a :ref:`derived type descriptor <format_derived_type>` and has a tag
+of ``DW_TAG_inheritance``, then the type represents a base class. If the member
+of is a :ref:`global variable descriptor <format_global_variables>` then it
+represents a static member. And, if the member is a :ref:`subprogram
+descriptor <format_subprograms>` then it represents a member function. For
+static members and member functions, ``getName()`` returns the members link or
+the C++ mangled name. ``getDisplayName()`` the simplied version of the name.
+
+The first member of subroutine (tag = ``DW_TAG_subroutine_type``) type elements
+is the return type for the subroutine. The remaining elements are the formal
+arguments to the subroutine.
+
+:ref:`Composite type <format_composite_type>` location can be determined from
+the context and line number. The size, alignment and offset are expressed in
+bits and can be 64 bit values. The alignment is used to round the offset when
+embedded in a :ref:`composite type <format_composite_type>` (as an example, to
+keep float doubles on 64 bit boundaries). The offset is the bit offset if
+embedded in a :ref:`composite type <format_composite_type>`.
+
+.. _format_subrange:
+
+Subrange descriptors
+^^^^^^^^^^^^^^^^^^^^
+
+.. code-block:: llvm
+
+ !42 = metadata !{
+ DIHeader(
+ i32, ;; Tag = 33 (DW_TAG_subrange_type)
+ i64, ;; Low value
+ i64 ;; High value
+ )
+ }
+
+These descriptors are used to define ranges of array subscripts for an array
+:ref:`composite type <format_composite_type>`. The low value defines the lower
+bounds typically zero for C/C++. The high value is the upper bounds. Values
+are 64 bit. ``High - Low + 1`` is the size of the array. If ``Low > High``
+the array bounds are not included in generated debugging information.
+
+.. _format_enumerator:
+
+Enumerator descriptors
+^^^^^^^^^^^^^^^^^^^^^^
+
+.. code-block:: llvm
+
+ !6 = metadata !{
+ DIHeader(
+ i32, ;; Tag = 40 (DW_TAG_enumerator)
+ mdstring, ;; Name
+ i64 ;; Value
+ )
+ }
+
+These descriptors are used to define members of an enumeration :ref:`composite
+type <format_composite_type>`, it associates the name to the value.
+
+Local variables
+^^^^^^^^^^^^^^^
+
+.. code-block:: llvm
+
+ !7 = metadata !{
+ DIHeader(
+ i32, ;; Tag (see below)
+ mdstring, ;; Name
+ i32, ;; 24 bit - Line number where defined
+ ;; 8 bit - Argument number. 1 indicates 1st argument.
+ i32 ;; flags
+ ),
+ metadata, ;; Context
+ metadata, ;; Reference to file where defined
+ metadata, ;; Reference to the type descriptor
+ metadata ;; (optional) Reference to inline location
+ }
+
+These descriptors are used to define variables local to a sub program. The
+value of the tag depends on the usage of the variable:
+
+.. code-block:: llvm
+
+ DW_TAG_auto_variable = 256
+ DW_TAG_arg_variable = 257
+
+An auto variable is any variable declared in the body of the function. An
+argument variable is any variable that appears as a formal argument to the
+function.
+
+The context is either the subprogram or block where the variable is defined.
+Name the source variable name. Context and line indicate where the variable
+was defined. Type descriptor defines the declared type of the variable.
+
+Complex Expressions
+^^^^^^^^^^^^^^^^^^^
+.. code-block:: llvm
+
+ !8 = metadata !{
+ i32, ;; DW_TAG_expression
+ ...
+ }
+
+Complex expressions describe variable storage locations in terms of
+prefix-notated DWARF expressions. Currently the only supported
+operators are ``DW_OP_plus``, ``DW_OP_deref``, and ``DW_OP_piece``.
+
+The ``DW_OP_piece`` operator is used for (typically larger aggregate)
+variables that are fragmented across several locations. It takes two
+i32 arguments, an offset and a size in bytes to describe which piece
+of the variable is at this location.
+
+
+.. _format_common_intrinsics:
+
+Debugger intrinsic functions
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+LLVM uses several intrinsic functions (name prefixed with "``llvm.dbg``") to
+provide debug information at various points in generated code.
+
+``llvm.dbg.declare``
+^^^^^^^^^^^^^^^^^^^^
+
+.. code-block:: llvm
+
+ void %llvm.dbg.declare(metadata, metadata)
+
+This intrinsic provides information about a local element (e.g., variable).
+The first argument is metadata holding the alloca for the variable. The second
+argument is metadata containing a description of the variable.
+
+``llvm.dbg.value``
+^^^^^^^^^^^^^^^^^^
+
+.. code-block:: llvm
+
+ void %llvm.dbg.value(metadata, i64, metadata)
+
+This intrinsic provides information when a user source variable is set to a new
+value. The first argument is the new value (wrapped as metadata). The second
+argument is the offset in the user source variable where the new value is
+written. The third argument is metadata containing a description of the user
+source variable.
+
+Object lifetimes and scoping
+============================
+
+In many languages, the local variables in functions can have their lifetimes or
+scopes limited to a subset of a function. In the C family of languages, for
+example, variables are only live (readable and writable) within the source
+block that they are defined in. In functional languages, values are only
+readable after they have been defined. Though this is a very obvious concept,
+it is non-trivial to model in LLVM, because it has no notion of scoping in this
+sense, and does not want to be tied to a language's scoping rules.
+
+In order to handle this, the LLVM debug format uses the metadata attached to
+llvm instructions to encode line number and scoping information. Consider the
+following C fragment, for example:
+
+.. code-block:: c
+
+ 1. void foo() {
+ 2. int X = 21;
+ 3. int Y = 22;
+ 4. {
+ 5. int Z = 23;
+ 6. Z = X;
+ 7. }
+ 8. X = Y;
+ 9. }
+
+Compiled to LLVM, this function would be represented like this:
+
+.. code-block:: llvm
+
+ define void @foo() #0 {
+ entry:
+ %X = alloca i32, align 4
+ %Y = alloca i32, align 4
+ %Z = alloca i32, align 4
+ call void @llvm.dbg.declare(metadata !{i32* %X}, metadata !10), !dbg !12
+ ; [debug line = 2:7] [debug variable = X]
+ store i32 21, i32* %X, align 4, !dbg !12
+ call void @llvm.dbg.declare(metadata !{i32* %Y}, metadata !13), !dbg !14
+ ; [debug line = 3:7] [debug variable = Y]
+ store i32 22, i32* %Y, align 4, !dbg !14
+ call void @llvm.dbg.declare(metadata !{i32* %Z}, metadata !15), !dbg !17
+ ; [debug line = 5:9] [debug variable = Z]
+ store i32 23, i32* %Z, align 4, !dbg !17
+ %0 = load i32* %X, align 4, !dbg !18
+ [debug line = 6:5]
+ store i32 %0, i32* %Z, align 4, !dbg !18
+ %1 = load i32* %Y, align 4, !dbg !19
+ [debug line = 8:3]
+ store i32 %1, i32* %X, align 4, !dbg !19
+ ret void, !dbg !20
+ }
+
+ ; Function Attrs: nounwind readnone
+ declare void @llvm.dbg.declare(metadata, metadata) #1
+
+ attributes #0 = { nounwind ssp uwtable "less-precise-fpmad"="false"
+ "no-frame-pointer-elim"="true" "no-frame-pointer-elim-non-leaf"
+ "no-infs-fp-math"="false" "no-nans-fp-math"="false"
+ "stack-protector-buffer-size"="8" "unsafe-fp-math"="false"
+ "use-soft-float"="false" }
+ attributes #1 = { nounwind readnone }
+
+ !llvm.dbg.cu = !{!0}
+ !llvm.module.flags = !{!8}
+ !llvm.ident = !{!9}
+
+ !0 = metadata !{i32 786449, metadata !1, i32 12,
+ metadata !"clang version 3.4 (trunk 193128) (llvm/trunk 193139)",
+ i1 false, metadata !"", i32 0, metadata !2, metadata !2, metadata !3,
+ metadata !2, metadata !2, metadata !""} ; [ DW_TAG_compile_unit ] \
+ [/private/tmp/foo.c] \
+ [DW_LANG_C99]
+ !1 = metadata !{metadata !"t.c", metadata !"/private/tmp"}
+ !2 = metadata !{i32 0}
+ !3 = metadata !{metadata !4}
+ !4 = metadata !{i32 786478, metadata !1, metadata !5, metadata !"foo",
+ metadata !"foo", metadata !"", i32 1, metadata !6,
+ i1 false, i1 true, i32 0, i32 0, null, i32 0, i1 false,
+ void ()* @foo, null, null, metadata !2, i32 1}
+ ; [ DW_TAG_subprogram ] [line 1] [def] [foo]
+ !5 = metadata !{i32 786473, metadata !1} ; [ DW_TAG_file_type ] \
+ [/private/tmp/t.c]
+ !6 = metadata !{i32 786453, i32 0, null, metadata !"", i32 0, i64 0, i64 0,
+ i64 0, i32 0, null, metadata !7, i32 0, null, null, null}
+ ; [ DW_TAG_subroutine_type ] \
+ [line 0, size 0, align 0, offset 0] [from ]
+ !7 = metadata !{null}
+ !8 = metadata !{i32 2, metadata !"Dwarf Version", i32 2}
+ !9 = metadata !{metadata !"clang version 3.4 (trunk 193128) (llvm/trunk 193139)"}
+ !10 = metadata !{i32 786688, metadata !4, metadata !"X", metadata !5, i32 2,
+ metadata !11, i32 0, i32 0} ; [ DW_TAG_auto_variable ] [X] \
+ [line 2]
+ !11 = metadata !{i32 786468, null, null, metadata !"int", i32 0, i64 32,
+ i64 32, i64 0, i32 0, i32 5} ; [ DW_TAG_base_type ] [int] \
+ [line 0, size 32, align 32, offset 0, enc DW_ATE_signed]
+ !12 = metadata !{i32 2, i32 0, metadata !4, null}
+ !13 = metadata !{i32 786688, metadata !4, metadata !"Y", metadata !5, i32 3,
+ metadata !11, i32 0, i32 0} ; [ DW_TAG_auto_variable ] [Y] \
+ [line 3]
+ !14 = metadata !{i32 3, i32 0, metadata !4, null}
+ !15 = metadata !{i32 786688, metadata !16, metadata !"Z", metadata !5, i32 5,
+ metadata !11, i32 0, i32 0} ; [ DW_TAG_auto_variable ] [Z] \
+ [line 5]
+ !16 = metadata !{i32 786443, metadata !1, metadata !4, i32 4, i32 0, i32 0} \
+ ; [ DW_TAG_lexical_block ] [/private/tmp/t.c]
+ !17 = metadata !{i32 5, i32 0, metadata !16, null}
+ !18 = metadata !{i32 6, i32 0, metadata !16, null}
+ !19 = metadata !{i32 8, i32 0, metadata !4, null} ; [ DW_TAG_imported_declaration ]
+ !20 = metadata !{i32 9, i32 0, metadata !4, null}
+
+This example illustrates a few important details about LLVM debugging
+information. In particular, it shows how the ``llvm.dbg.declare`` intrinsic and
+location information, which are attached to an instruction, are applied
+together to allow a debugger to analyze the relationship between statements,
+variable definitions, and the code used to implement the function.
+
+.. code-block:: llvm
+
+ call void @llvm.dbg.declare(metadata !{i32* %X}, metadata !10), !dbg !12
+ ; [debug line = 2:7] [debug variable = X]
+
+The first intrinsic ``%llvm.dbg.declare`` encodes debugging information for the
+variable ``X``. The metadata ``!dbg !12`` attached to the intrinsic provides
+scope information for the variable ``X``.
+
+.. code-block:: llvm
+
+ !12 = metadata !{i32 2, i32 0, metadata !4, null}
+ !4 = metadata !{i32 786478, metadata !1, metadata !5, metadata !"foo",
+ metadata !"foo", metadata !"", i32 1, metadata !6,
+ i1 false, i1 true, i32 0, i32 0, null, i32 0, i1 false,
+ void ()* @foo, null, null, metadata !2, i32 1}
+ ; [ DW_TAG_subprogram ] [line 1] [def] [foo]
+
+Here ``!12`` is metadata providing location information. It has four fields:
+line number, column number, scope, and original scope. The original scope
+represents inline location if this instruction is inlined inside a caller, and
+is null otherwise. In this example, scope is encoded by ``!4``, a
+:ref:`subprogram descriptor <format_subprograms>`. This way the location
+information attached to the intrinsics indicates that the variable ``X`` is
+declared at line number 2 at a function level scope in function ``foo``.
+
+Now lets take another example.
+
+.. code-block:: llvm
+
+ call void @llvm.dbg.declare(metadata !{i32* %Z}, metadata !15), !dbg !17
+ ; [debug line = 5:9] [debug variable = Z]
+
+The third intrinsic ``%llvm.dbg.declare`` encodes debugging information for
+variable ``Z``. The metadata ``!dbg !17`` attached to the intrinsic provides
+scope information for the variable ``Z``.
+
+.. code-block:: llvm
+
+ !16 = metadata !{i32 786443, metadata !1, metadata !4, i32 4, i32 0, i32 0} \
+ ; [ DW_TAG_lexical_block ] [/private/tmp/t.c]
+ !17 = metadata !{i32 5, i32 0, metadata !16, null}
+
+Here ``!15`` indicates that ``Z`` is declared at line number 5 and
+column number 0 inside of lexical scope ``!16``. The lexical scope itself
+resides inside of subprogram ``!4`` described above.
+
+The scope information attached with each instruction provides a straightforward
+way to find instructions covered by a scope.
+
+.. _ccxx_frontend:
+
+C/C++ front-end specific debug information
+==========================================
+
+The C and C++ front-ends represent information about the program in a format
+that is effectively identical to `DWARF 3.0
+<http://www.eagercon.com/dwarf/dwarf3std.htm>`_ in terms of information
+content. This allows code generators to trivially support native debuggers by
+generating standard dwarf information, and contains enough information for
+non-dwarf targets to translate it as needed.
+
+This section describes the forms used to represent C and C++ programs. Other
+languages could pattern themselves after this (which itself is tuned to
+representing programs in the same way that DWARF 3 does), or they could choose
+to provide completely different forms if they don't fit into the DWARF model.
+As support for debugging information gets added to the various LLVM
+source-language front-ends, the information used should be documented here.
+
+The following sections provide examples of a few C/C++ constructs and the debug
+information that would best describe those constructs. The canonical
+references are the ``DIDescriptor`` classes defined in
+``include/llvm/IR/DebugInfo.h`` and the implementations of the helper functions
+in ``lib/IR/DIBuilder.cpp``.
+
+C/C++ source file information
+-----------------------------
+
+``llvm::Instruction`` provides easy access to metadata attached with an
+instruction. One can extract line number information encoded in LLVM IR using
+``Instruction::getMetadata()`` and ``DILocation::getLineNumber()``.
+
+.. code-block:: c++
+
+ if (MDNode *N = I->getMetadata("dbg")) { // Here I is an LLVM instruction
+ DILocation Loc(N); // DILocation is in DebugInfo.h
+ unsigned Line = Loc.getLineNumber();
+ StringRef File = Loc.getFilename();
+ StringRef Dir = Loc.getDirectory();
+ }
+
+C/C++ global variable information
+---------------------------------
+
+Given an integer global variable declared as follows:
+
+.. code-block:: c
+
+ int MyGlobal = 100;
+
+a C/C++ front-end would generate the following descriptors:
+
+.. code-block:: llvm
+
+ ;;
+ ;; Define the global itself.
+ ;;
+ @MyGlobal = global i32 100, align 4
+ ...
+ ;;
+ ;; List of debug info of globals
+ ;;
+ !llvm.dbg.cu = !{!0}
+
+ ;; Define the compile unit.
+ !0 = metadata !{
+ ; Header(
+ ; i32 17, ;; Tag
+ ; i32 0, ;; Context
+ ; i32 4, ;; Language
+ ; metadata !"clang version 3.6.0 ", ;; Producer
+ ; i1 false, ;; "isOptimized"?
+ ; metadata !"", ;; Flags
+ ; i32 0, ;; Runtime Version
+ ; "", ;; Split debug filename
+ ; 1 ;; Full debug info
+ ; )
+ metadata !"0x11\0012\00clang version 3.6.0 \000\00\000\00\001",
+ metadata !1, ;; File
+ metadata !2, ;; Enum Types
+ metadata !2, ;; Retained Types
+ metadata !2, ;; Subprograms
+ metadata !3, ;; Global Variables
+ metadata !2 ;; Imported entities
+ } ; [ DW_TAG_compile_unit ]
+
+ ;; The file/directory pair.
+ !1 = metadata !{
+ metadata !"foo.c", ;; Filename
+ metadata !"/Users/dexonsmith/data/llvm/debug-info" ;; Directory
+ }
+
+ ;; An empty array.
+ !2 = metadata !{}
+
+ ;; The Array of Global Variables
+ !3 = metadata !{
+ metadata !4
+ }
+
+ ;;
+ ;; Define the global variable itself.
+ ;;
+ !4 = metadata !{
+ ; Header(
+ ; i32 52, ;; Tag
+ ; metadata !"MyGlobal", ;; Name
+ ; metadata !"MyGlobal", ;; Display Name
+ ; metadata !"", ;; Linkage Name
+ ; i32 1, ;; Line
+ ; i32 0, ;; IsLocalToUnit
+ ; i32 1 ;; IsDefinition
+ ; )
+ metadata !"0x34\00MyGlobal\00MyGlobal\00\001\000\001",
+ null, ;; Unused
+ metadata !5, ;; File
+ metadata !6, ;; Type
+ i32* @MyGlobal, ;; LLVM-IR Value
+ null ;; Static member declaration
+ } ; [ DW_TAG_variable ]
+
+ ;;
+ ;; Define the file
+ ;;
+ !5 = metadata !{
+ ; Header(
+ ; i32 41 ;; Tag
+ ; )
+ metadata !"0x29",
+ metadata !1 ;; File/directory pair
+ } ; [ DW_TAG_file_type ]
+
+ ;;
+ ;; Define the type
+ ;;
+ !6 = metadata !{
+ ; Header(
+ ; i32 36, ;; Tag
+ ; metadata !"int", ;; Name
+ ; i32 0, ;; Line
+ ; i64 32, ;; Size in Bits
+ ; i64 32, ;; Align in Bits
+ ; i64 0, ;; Offset
+ ; i32 0, ;; Flags
+ ; i32 5 ;; Encoding
+ ; )
+ metadata !"0x24\00int\000\0032\0032\000\000\005",
+ null, ;; Unused
+ null ;; Unused
+ } ; [ DW_TAG_base_type ]
+
+C/C++ function information
+--------------------------
+
+Given a function declared as follows:
+
+.. code-block:: c
+
+ int main(int argc, char *argv[]) {
+ return 0;
+ }
+
+a C/C++ front-end would generate the following descriptors:
+
+.. code-block:: llvm
+
+ ;;
+ ;; Define the anchor for subprograms.
+ ;;
+ !6 = metadata !{
+ ; Header(
+ ; i32 46, ;; Tag
+ ; metadata !"main", ;; Name
+ ; metadata !"main", ;; Display name
+ ; metadata !"", ;; Linkage name
+ ; i32 1, ;; Line number
+ ; i1 false, ;; Is local
+ ; i1 true, ;; Is definition
+ ; i32 0, ;; Virtuality attribute, e.g. pure virtual function
+ ; i32 0, ;; Index into virtual table for C++ methods
+ ; i32 256, ;; Flags
+ ; i1 0, ;; True if this function is optimized
+ ; 1 ;; Line number of the opening '{' of the function
+ ; )
+ metadata !"0x2e\00main\00main\00\001\000\001\000\000\00256\000\001",
+ metadata !1, ;; File
+ metadata !5, ;; Context
+ metadata !6, ;; Type
+ null, ;; Containing type
+ i32 (i32, i8**)* @main, ;; Pointer to llvm::Function
+ null, ;; Function template parameters
+ null, ;; Function declaration
+ metadata !2 ;; List of function variables (emitted when optimizing)
+ }
+
+ ;;
+ ;; Define the subprogram itself.
+ ;;
+ define i32 @main(i32 %argc, i8** %argv) {
+ ...
+ }
+
+Debugging information format
+============================
+
+Debugging Information Extension for Objective C Properties
+----------------------------------------------------------
+
+Introduction
+^^^^^^^^^^^^
+
+Objective C provides a simpler way to declare and define accessor methods using
+declared properties. The language provides features to declare a property and
+to let compiler synthesize accessor methods.
+
+The debugger lets developer inspect Objective C interfaces and their instance
+variables and class variables. However, the debugger does not know anything
+about the properties defined in Objective C interfaces. The debugger consumes
+information generated by compiler in DWARF format. The format does not support
+encoding of Objective C properties. This proposal describes DWARF extensions to
+encode Objective C properties, which the debugger can use to let developers
+inspect Objective C properties.
+
+Proposal
+^^^^^^^^
+
+Objective C properties exist separately from class members. A property can be
+defined only by "setter" and "getter" selectors, and be calculated anew on each
+access. Or a property can just be a direct access to some declared ivar.
+Finally it can have an ivar "automatically synthesized" for it by the compiler,
+in which case the property can be referred to in user code directly using the
+standard C dereference syntax as well as through the property "dot" syntax, but
+there is no entry in the ``@interface`` declaration corresponding to this ivar.
+
+To facilitate debugging, these properties we will add a new DWARF TAG into the
+``DW_TAG_structure_type`` definition for the class to hold the description of a
+given property, and a set of DWARF attributes that provide said description.
+The property tag will also contain the name and declared type of the property.
+
+If there is a related ivar, there will also be a DWARF property attribute placed
+in the ``DW_TAG_member`` DIE for that ivar referring back to the property TAG
+for that property. And in the case where the compiler synthesizes the ivar
+directly, the compiler is expected to generate a ``DW_TAG_member`` for that
+ivar (with the ``DW_AT_artificial`` set to 1), whose name will be the name used
+to access this ivar directly in code, and with the property attribute pointing
+back to the property it is backing.
+
+The following examples will serve as illustration for our discussion:
+
+.. code-block:: objc
+
+ @interface I1 {
+ int n2;
+ }
+
+ @property int p1;
+ @property int p2;
+ @end
+
+ @implementation I1
+ @synthesize p1;
+ @synthesize p2 = n2;
+ @end
+
+This produces the following DWARF (this is a "pseudo dwarfdump" output):
+
+.. code-block:: none
+
+ 0x00000100: TAG_structure_type [7] *
+ AT_APPLE_runtime_class( 0x10 )
+ AT_name( "I1" )
+ AT_decl_file( "Objc_Property.m" )
+ AT_decl_line( 3 )
+
+ 0x00000110 TAG_APPLE_property
+ AT_name ( "p1" )
+ AT_type ( {0x00000150} ( int ) )
+
+ 0x00000120: TAG_APPLE_property
+ AT_name ( "p2" )
+ AT_type ( {0x00000150} ( int ) )
+
+ 0x00000130: TAG_member [8]
+ AT_name( "_p1" )
+ AT_APPLE_property ( {0x00000110} "p1" )
+ AT_type( {0x00000150} ( int ) )
+ AT_artificial ( 0x1 )
+
+ 0x00000140: TAG_member [8]
+ AT_name( "n2" )
+ AT_APPLE_property ( {0x00000120} "p2" )
+ AT_type( {0x00000150} ( int ) )
+
+ 0x00000150: AT_type( ( int ) )
+
+Note, the current convention is that the name of the ivar for an
+auto-synthesized property is the name of the property from which it derives
+with an underscore prepended, as is shown in the example. But we actually
+don't need to know this convention, since we are given the name of the ivar
+directly.
+
+Also, it is common practice in ObjC to have different property declarations in
+the @interface and @implementation - e.g. to provide a read-only property in
+the interface,and a read-write interface in the implementation. In that case,
+the compiler should emit whichever property declaration will be in force in the
+current translation unit.
+
+Developers can decorate a property with attributes which are encoded using
+``DW_AT_APPLE_property_attribute``.
+
+.. code-block:: objc
+
+ @property (readonly, nonatomic) int pr;
+
+.. code-block:: none
+
+ TAG_APPLE_property [8]
+ AT_name( "pr" )
+ AT_type ( {0x00000147} (int) )
+ AT_APPLE_property_attribute (DW_APPLE_PROPERTY_readonly, DW_APPLE_PROPERTY_nonatomic)
+
+The setter and getter method names are attached to the property using
+``DW_AT_APPLE_property_setter`` and ``DW_AT_APPLE_property_getter`` attributes.
+
+.. code-block:: objc
+
+ @interface I1
+ @property (setter=myOwnP3Setter:) int p3;
+ -(void)myOwnP3Setter:(int)a;
+ @end
+
+ @implementation I1
+ @synthesize p3;
+ -(void)myOwnP3Setter:(int)a{ }
+ @end
+
+The DWARF for this would be:
+
+.. code-block:: none
+
+ 0x000003bd: TAG_structure_type [7] *
+ AT_APPLE_runtime_class( 0x10 )
+ AT_name( "I1" )
+ AT_decl_file( "Objc_Property.m" )
+ AT_decl_line( 3 )
+
+ 0x000003cd TAG_APPLE_property
+ AT_name ( "p3" )
+ AT_APPLE_property_setter ( "myOwnP3Setter:" )
+ AT_type( {0x00000147} ( int ) )
+
+ 0x000003f3: TAG_member [8]
+ AT_name( "_p3" )
+ AT_type ( {0x00000147} ( int ) )
+ AT_APPLE_property ( {0x000003cd} )
+ AT_artificial ( 0x1 )
+
+New DWARF Tags
+^^^^^^^^^^^^^^
+
++-----------------------+--------+
+| TAG | Value |
++=======================+========+
+| DW_TAG_APPLE_property | 0x4200 |
++-----------------------+--------+
+
+New DWARF Attributes
+^^^^^^^^^^^^^^^^^^^^
+
++--------------------------------+--------+-----------+
+| Attribute | Value | Classes |
++================================+========+===========+
+| DW_AT_APPLE_property | 0x3fed | Reference |
++--------------------------------+--------+-----------+
+| DW_AT_APPLE_property_getter | 0x3fe9 | String |
++--------------------------------+--------+-----------+
+| DW_AT_APPLE_property_setter | 0x3fea | String |
++--------------------------------+--------+-----------+
+| DW_AT_APPLE_property_attribute | 0x3feb | Constant |
++--------------------------------+--------+-----------+
+
+New DWARF Constants
+^^^^^^^^^^^^^^^^^^^
+
++--------------------------------------+-------+
+| Name | Value |
++======================================+=======+
+| DW_APPLE_PROPERTY_readonly | 0x01 |
++--------------------------------------+-------+
+| DW_APPLE_PROPERTY_getter | 0x02 |
++--------------------------------------+-------+
+| DW_APPLE_PROPERTY_assign | 0x04 |
++--------------------------------------+-------+
+| DW_APPLE_PROPERTY_readwrite | 0x08 |
++--------------------------------------+-------+
+| DW_APPLE_PROPERTY_retain | 0x10 |
++--------------------------------------+-------+
+| DW_APPLE_PROPERTY_copy | 0x20 |
++--------------------------------------+-------+
+| DW_APPLE_PROPERTY_nonatomic | 0x40 |
++--------------------------------------+-------+
+| DW_APPLE_PROPERTY_setter | 0x80 |
++--------------------------------------+-------+
+| DW_APPLE_PROPERTY_atomic | 0x100 |
++--------------------------------------+-------+
+| DW_APPLE_PROPERTY_weak | 0x200 |
++--------------------------------------+-------+
+| DW_APPLE_PROPERTY_strong | 0x400 |
++--------------------------------------+-------+
+| DW_APPLE_PROPERTY_unsafe_unretained | 0x800 |
++--------------------------------+-----+-------+
+
+Name Accelerator Tables
+-----------------------
+
+Introduction
+^^^^^^^^^^^^
+
+The "``.debug_pubnames``" and "``.debug_pubtypes``" formats are not what a
+debugger needs. The "``pub``" in the section name indicates that the entries
+in the table are publicly visible names only. This means no static or hidden
+functions show up in the "``.debug_pubnames``". No static variables or private
+class variables are in the "``.debug_pubtypes``". Many compilers add different
+things to these tables, so we can't rely upon the contents between gcc, icc, or
+clang.
+
+The typical query given by users tends not to match up with the contents of
+these tables. For example, the DWARF spec states that "In the case of the name
+of a function member or static data member of a C++ structure, class or union,
+the name presented in the "``.debug_pubnames``" section is not the simple name
+given by the ``DW_AT_name attribute`` of the referenced debugging information
+entry, but rather the fully qualified name of the data or function member."
+So the only names in these tables for complex C++ entries is a fully
+qualified name. Debugger users tend not to enter their search strings as
+"``a::b::c(int,const Foo&) const``", but rather as "``c``", "``b::c``" , or
+"``a::b::c``". So the name entered in the name table must be demangled in
+order to chop it up appropriately and additional names must be manually entered
+into the table to make it effective as a name lookup table for debuggers to
+se.
+
+All debuggers currently ignore the "``.debug_pubnames``" table as a result of
+its inconsistent and useless public-only name content making it a waste of
+space in the object file. These tables, when they are written to disk, are not
+sorted in any way, leaving every debugger to do its own parsing and sorting.
+These tables also include an inlined copy of the string values in the table
+itself making the tables much larger than they need to be on disk, especially
+for large C++ programs.
+
+Can't we just fix the sections by adding all of the names we need to this
+table? No, because that is not what the tables are defined to contain and we
+won't know the difference between the old bad tables and the new good tables.
+At best we could make our own renamed sections that contain all of the data we
+need.
+
+These tables are also insufficient for what a debugger like LLDB needs. LLDB
+uses clang for its expression parsing where LLDB acts as a PCH. LLDB is then
+often asked to look for type "``foo``" or namespace "``bar``", or list items in
+namespace "``baz``". Namespaces are not included in the pubnames or pubtypes
+tables. Since clang asks a lot of questions when it is parsing an expression,
+we need to be very fast when looking up names, as it happens a lot. Having new
+accelerator tables that are optimized for very quick lookups will benefit this
+type of debugging experience greatly.
+
+We would like to generate name lookup tables that can be mapped into memory
+from disk, and used as is, with little or no up-front parsing. We would also
+be able to control the exact content of these different tables so they contain
+exactly what we need. The Name Accelerator Tables were designed to fix these
+issues. In order to solve these issues we need to:
+
+* Have a format that can be mapped into memory from disk and used as is
+* Lookups should be very fast
+* Extensible table format so these tables can be made by many producers
+* Contain all of the names needed for typical lookups out of the box
+* Strict rules for the contents of tables
+
+Table size is important and the accelerator table format should allow the reuse
+of strings from common string tables so the strings for the names are not
+duplicated. We also want to make sure the table is ready to be used as-is by
+simply mapping the table into memory with minimal header parsing.
+
+The name lookups need to be fast and optimized for the kinds of lookups that
+debuggers tend to do. Optimally we would like to touch as few parts of the
+mapped table as possible when doing a name lookup and be able to quickly find
+the name entry we are looking for, or discover there are no matches. In the
+case of debuggers we optimized for lookups that fail most of the time.
+
+Each table that is defined should have strict rules on exactly what is in the
+accelerator tables and documented so clients can rely on the content.
+
+Hash Tables
+^^^^^^^^^^^
+
+Standard Hash Tables
+""""""""""""""""""""
+
+Typical hash tables have a header, buckets, and each bucket points to the
+bucket contents:
+
+.. code-block:: none
+
+ .------------.
+ | HEADER |
+ |------------|
+ | BUCKETS |
+ |------------|
+ | DATA |
+ `------------'
+
+The BUCKETS are an array of offsets to DATA for each hash:
+
+.. code-block:: none
+
+ .------------.
+ | 0x00001000 | BUCKETS[0]
+ | 0x00002000 | BUCKETS[1]
+ | 0x00002200 | BUCKETS[2]
+ | 0x000034f0 | BUCKETS[3]
+ | | ...
+ | 0xXXXXXXXX | BUCKETS[n_buckets]
+ '------------'
+
+So for ``bucket[3]`` in the example above, we have an offset into the table
+0x000034f0 which points to a chain of entries for the bucket. Each bucket must
+contain a next pointer, full 32 bit hash value, the string itself, and the data
+for the current string value.
+
+.. code-block:: none
+
+ .------------.
+ 0x000034f0: | 0x00003500 | next pointer
+ | 0x12345678 | 32 bit hash
+ | "erase" | string value
+ | data[n] | HashData for this bucket
+ |------------|
+ 0x00003500: | 0x00003550 | next pointer
+ | 0x29273623 | 32 bit hash
+ | "dump" | string value
+ | data[n] | HashData for this bucket
+ |------------|
+ 0x00003550: | 0x00000000 | next pointer
+ | 0x82638293 | 32 bit hash
+ | "main" | string value
+ | data[n] | HashData for this bucket
+ `------------'
+
+The problem with this layout for debuggers is that we need to optimize for the
+negative lookup case where the symbol we're searching for is not present. So
+if we were to lookup "``printf``" in the table above, we would make a 32 hash
+for "``printf``", it might match ``bucket[3]``. We would need to go to the
+offset 0x000034f0 and start looking to see if our 32 bit hash matches. To do
+so, we need to read the next pointer, then read the hash, compare it, and skip
+to the next bucket. Each time we are skipping many bytes in memory and
+touching new cache pages just to do the compare on the full 32 bit hash. All
+of these accesses then tell us that we didn't have a match.
+
+Name Hash Tables
+""""""""""""""""
+
+To solve the issues mentioned above we have structured the hash tables a bit
+differently: a header, buckets, an array of all unique 32 bit hash values,
+followed by an array of hash value data offsets, one for each hash value, then
+the data for all hash values:
+
+.. code-block:: none
+
+ .-------------.
+ | HEADER |
+ |-------------|
+ | BUCKETS |
+ |-------------|
+ | HASHES |
+ |-------------|
+ | OFFSETS |
+ |-------------|
+ | DATA |
+ `-------------'
+
+The ``BUCKETS`` in the name tables are an index into the ``HASHES`` array. By
+making all of the full 32 bit hash values contiguous in memory, we allow
+ourselves to efficiently check for a match while touching as little memory as
+possible. Most often checking the 32 bit hash values is as far as the lookup
+goes. If it does match, it usually is a match with no collisions. So for a
+table with "``n_buckets``" buckets, and "``n_hashes``" unique 32 bit hash
+values, we can clarify the contents of the ``BUCKETS``, ``HASHES`` and
+``OFFSETS`` as:
+
+.. code-block:: none
+
+ .-------------------------.
+ | HEADER.magic | uint32_t
+ | HEADER.version | uint16_t
+ | HEADER.hash_function | uint16_t
+ | HEADER.bucket_count | uint32_t
+ | HEADER.hashes_count | uint32_t
+ | HEADER.header_data_len | uint32_t
+ | HEADER_DATA | HeaderData
+ |-------------------------|
+ | BUCKETS | uint32_t[n_buckets] // 32 bit hash indexes
+ |-------------------------|
+ | HASHES | uint32_t[n_hashes] // 32 bit hash values
+ |-------------------------|
+ | OFFSETS | uint32_t[n_hashes] // 32 bit offsets to hash value data
+ |-------------------------|
+ | ALL HASH DATA |
+ `-------------------------'
+
+So taking the exact same data from the standard hash example above we end up
+with:
+
+.. code-block:: none
+
+ .------------.
+ | HEADER |
+ |------------|
+ | 0 | BUCKETS[0]
+ | 2 | BUCKETS[1]
+ | 5 | BUCKETS[2]
+ | 6 | BUCKETS[3]
+ | | ...
+ | ... | BUCKETS[n_buckets]
+ |------------|
+ | 0x........ | HASHES[0]
+ | 0x........ | HASHES[1]
+ | 0x........ | HASHES[2]
+ | 0x........ | HASHES[3]
+ | 0x........ | HASHES[4]
+ | 0x........ | HASHES[5]
+ | 0x12345678 | HASHES[6] hash for BUCKETS[3]
+ | 0x29273623 | HASHES[7] hash for BUCKETS[3]
+ | 0x82638293 | HASHES[8] hash for BUCKETS[3]
+ | 0x........ | HASHES[9]
+ | 0x........ | HASHES[10]
+ | 0x........ | HASHES[11]
+ | 0x........ | HASHES[12]
+ | 0x........ | HASHES[13]
+ | 0x........ | HASHES[n_hashes]
+ |------------|
+ | 0x........ | OFFSETS[0]
+ | 0x........ | OFFSETS[1]
+ | 0x........ | OFFSETS[2]
+ | 0x........ | OFFSETS[3]
+ | 0x........ | OFFSETS[4]
+ | 0x........ | OFFSETS[5]
+ | 0x000034f0 | OFFSETS[6] offset for BUCKETS[3]
+ | 0x00003500 | OFFSETS[7] offset for BUCKETS[3]
+ | 0x00003550 | OFFSETS[8] offset for BUCKETS[3]
+ | 0x........ | OFFSETS[9]
+ | 0x........ | OFFSETS[10]
+ | 0x........ | OFFSETS[11]
+ | 0x........ | OFFSETS[12]
+ | 0x........ | OFFSETS[13]
+ | 0x........ | OFFSETS[n_hashes]
+ |------------|
+ | |
+ | |
+ | |
+ | |
+ | |
+ |------------|
+ 0x000034f0: | 0x00001203 | .debug_str ("erase")
+ | 0x00000004 | A 32 bit array count - number of HashData with name "erase"
+ | 0x........ | HashData[0]
+ | 0x........ | HashData[1]
+ | 0x........ | HashData[2]
+ | 0x........ | HashData[3]
+ | 0x00000000 | String offset into .debug_str (terminate data for hash)
+ |------------|
+ 0x00003500: | 0x00001203 | String offset into .debug_str ("collision")
+ | 0x00000002 | A 32 bit array count - number of HashData with name "collision"
+ | 0x........ | HashData[0]
+ | 0x........ | HashData[1]
+ | 0x00001203 | String offset into .debug_str ("dump")
+ | 0x00000003 | A 32 bit array count - number of HashData with name "dump"
+ | 0x........ | HashData[0]
+ | 0x........ | HashData[1]
+ | 0x........ | HashData[2]
+ | 0x00000000 | String offset into .debug_str (terminate data for hash)
+ |------------|
+ 0x00003550: | 0x00001203 | String offset into .debug_str ("main")
+ | 0x00000009 | A 32 bit array count - number of HashData with name "main"
+ | 0x........ | HashData[0]
+ | 0x........ | HashData[1]
+ | 0x........ | HashData[2]
+ | 0x........ | HashData[3]
+ | 0x........ | HashData[4]
+ | 0x........ | HashData[5]
+ | 0x........ | HashData[6]
+ | 0x........ | HashData[7]
+ | 0x........ | HashData[8]
+ | 0x00000000 | String offset into .debug_str (terminate data for hash)
+ `------------'
+
+So we still have all of the same data, we just organize it more efficiently for
+debugger lookup. If we repeat the same "``printf``" lookup from above, we
+would hash "``printf``" and find it matches ``BUCKETS[3]`` by taking the 32 bit
+hash value and modulo it by ``n_buckets``. ``BUCKETS[3]`` contains "6" which
+is the index into the ``HASHES`` table. We would then compare any consecutive
+32 bit hashes values in the ``HASHES`` array as long as the hashes would be in
+``BUCKETS[3]``. We do this by verifying that each subsequent hash value modulo
+``n_buckets`` is still 3. In the case of a failed lookup we would access the
+memory for ``BUCKETS[3]``, and then compare a few consecutive 32 bit hashes
+before we know that we have no match. We don't end up marching through
+multiple words of memory and we really keep the number of processor data cache
+lines being accessed as small as possible.
+
+The string hash that is used for these lookup tables is the Daniel J.
+Bernstein hash which is also used in the ELF ``GNU_HASH`` sections. It is a
+very good hash for all kinds of names in programs with very few hash
+collisions.
+
+Empty buckets are designated by using an invalid hash index of ``UINT32_MAX``.
+
+Details
+^^^^^^^
+
+These name hash tables are designed to be generic where specializations of the
+table get to define additional data that goes into the header ("``HeaderData``"),
+how the string value is stored ("``KeyType``") and the content of the data for each
+hash value.
+
+Header Layout
+"""""""""""""
+
+The header has a fixed part, and the specialized part. The exact format of the
+header is:
+
+.. code-block:: c
+
+ struct Header
+ {
+ uint32_t magic; // 'HASH' magic value to allow endian detection
+ uint16_t version; // Version number
+ uint16_t hash_function; // The hash function enumeration that was used
+ uint32_t bucket_count; // The number of buckets in this hash table
+ uint32_t hashes_count; // The total number of unique hash values and hash data offsets in this table
+ uint32_t header_data_len; // The bytes to skip to get to the hash indexes (buckets) for correct alignment
+ // Specifically the length of the following HeaderData field - this does not
+ // include the size of the preceding fields
+ HeaderData header_data; // Implementation specific header data
+ };
+
+The header starts with a 32 bit "``magic``" value which must be ``'HASH'``
+encoded as an ASCII integer. This allows the detection of the start of the
+hash table and also allows the table's byte order to be determined so the table
+can be correctly extracted. The "``magic``" value is followed by a 16 bit
+``version`` number which allows the table to be revised and modified in the
+future. The current version number is 1. ``hash_function`` is a ``uint16_t``
+enumeration that specifies which hash function was used to produce this table.
+The current values for the hash function enumerations include:
+
+.. code-block:: c
+
+ enum HashFunctionType
+ {
+ eHashFunctionDJB = 0u, // Daniel J Bernstein hash function
+ };
+
+``bucket_count`` is a 32 bit unsigned integer that represents how many buckets
+are in the ``BUCKETS`` array. ``hashes_count`` is the number of unique 32 bit
+hash values that are in the ``HASHES`` array, and is the same number of offsets
+are contained in the ``OFFSETS`` array. ``header_data_len`` specifies the size
+in bytes of the ``HeaderData`` that is filled in by specialized versions of
+this table.
+
+Fixed Lookup
+""""""""""""
+
+The header is followed by the buckets, hashes, offsets, and hash value data.
+
+.. code-block:: c
+
+ struct FixedTable
+ {
+ uint32_t buckets[Header.bucket_count]; // An array of hash indexes into the "hashes[]" array below
+ uint32_t hashes [Header.hashes_count]; // Every unique 32 bit hash for the entire table is in this table
+ uint32_t offsets[Header.hashes_count]; // An offset that corresponds to each item in the "hashes[]" array above
+ };
+
+``buckets`` is an array of 32 bit indexes into the ``hashes`` array. The
+``hashes`` array contains all of the 32 bit hash values for all names in the
+hash table. Each hash in the ``hashes`` table has an offset in the ``offsets``
+array that points to the data for the hash value.
+
+This table setup makes it very easy to repurpose these tables to contain
+different data, while keeping the lookup mechanism the same for all tables.
+This layout also makes it possible to save the table to disk and map it in
+later and do very efficient name lookups with little or no parsing.
+
+DWARF lookup tables can be implemented in a variety of ways and can store a lot
+of information for each name. We want to make the DWARF tables extensible and
+able to store the data efficiently so we have used some of the DWARF features
+that enable efficient data storage to define exactly what kind of data we store
+for each name.
+
+The ``HeaderData`` contains a definition of the contents of each HashData chunk.
+We might want to store an offset to all of the debug information entries (DIEs)
+for each name. To keep things extensible, we create a list of items, or
+Atoms, that are contained in the data for each name. First comes the type of
+the data in each atom:
+
+.. code-block:: c
+
+ enum AtomType
+ {
+ eAtomTypeNULL = 0u,
+ eAtomTypeDIEOffset = 1u, // DIE offset, check form for encoding
+ eAtomTypeCUOffset = 2u, // DIE offset of the compiler unit header that contains the item in question
+ eAtomTypeTag = 3u, // DW_TAG_xxx value, should be encoded as DW_FORM_data1 (if no tags exceed 255) or DW_FORM_data2
+ eAtomTypeNameFlags = 4u, // Flags from enum NameFlags
+ eAtomTypeTypeFlags = 5u, // Flags from enum TypeFlags
+ };
+
+The enumeration values and their meanings are:
+
+.. code-block:: none
+
+ eAtomTypeNULL - a termination atom that specifies the end of the atom list
+ eAtomTypeDIEOffset - an offset into the .debug_info section for the DWARF DIE for this name
+ eAtomTypeCUOffset - an offset into the .debug_info section for the CU that contains the DIE
+ eAtomTypeDIETag - The DW_TAG_XXX enumeration value so you don't have to parse the DWARF to see what it is
+ eAtomTypeNameFlags - Flags for functions and global variables (isFunction, isInlined, isExternal...)
+ eAtomTypeTypeFlags - Flags for types (isCXXClass, isObjCClass, ...)
+
+Then we allow each atom type to define the atom type and how the data for each
+atom type data is encoded:
+
+.. code-block:: c
+
+ struct Atom
+ {
+ uint16_t type; // AtomType enum value
+ uint16_t form; // DWARF DW_FORM_XXX defines
+ };
+
+The ``form`` type above is from the DWARF specification and defines the exact
+encoding of the data for the Atom type. See the DWARF specification for the
+``DW_FORM_`` definitions.
+
+.. code-block:: c
+
+ struct HeaderData
+ {
+ uint32_t die_offset_base;
+ uint32_t atom_count;
+ Atoms atoms[atom_count0];
+ };
+
+``HeaderData`` defines the base DIE offset that should be added to any atoms
+that are encoded using the ``DW_FORM_ref1``, ``DW_FORM_ref2``,
+``DW_FORM_ref4``, ``DW_FORM_ref8`` or ``DW_FORM_ref_udata``. It also defines
+what is contained in each ``HashData`` object -- ``Atom.form`` tells us how large
+each field will be in the ``HashData`` and the ``Atom.type`` tells us how this data
+should be interpreted.
+
+For the current implementations of the "``.apple_names``" (all functions +
+globals), the "``.apple_types``" (names of all types that are defined), and
+the "``.apple_namespaces``" (all namespaces), we currently set the ``Atom``
+array to be:
+
+.. code-block:: c
+
+ HeaderData.atom_count = 1;
+ HeaderData.atoms[0].type = eAtomTypeDIEOffset;
+ HeaderData.atoms[0].form = DW_FORM_data4;
+
+This defines the contents to be the DIE offset (eAtomTypeDIEOffset) that is
+encoded as a 32 bit value (DW_FORM_data4). This allows a single name to have
+multiple matching DIEs in a single file, which could come up with an inlined
+function for instance. Future tables could include more information about the
+DIE such as flags indicating if the DIE is a function, method, block,
+or inlined.
+
+The KeyType for the DWARF table is a 32 bit string table offset into the
+".debug_str" table. The ".debug_str" is the string table for the DWARF which
+may already contain copies of all of the strings. This helps make sure, with
+help from the compiler, that we reuse the strings between all of the DWARF
+sections and keeps the hash table size down. Another benefit to having the
+compiler generate all strings as DW_FORM_strp in the debug info, is that
+DWARF parsing can be made much faster.
+
+After a lookup is made, we get an offset into the hash data. The hash data
+needs to be able to deal with 32 bit hash collisions, so the chunk of data
+at the offset in the hash data consists of a triple:
+
+.. code-block:: c
+
+ uint32_t str_offset
+ uint32_t hash_data_count
+ HashData[hash_data_count]
+
+If "str_offset" is zero, then the bucket contents are done. 99.9% of the
+hash data chunks contain a single item (no 32 bit hash collision):
+
+.. code-block:: none
+
+ .------------.
+ | 0x00001023 | uint32_t KeyType (.debug_str[0x0001023] => "main")
+ | 0x00000004 | uint32_t HashData count
+ | 0x........ | uint32_t HashData[0] DIE offset
+ | 0x........ | uint32_t HashData[1] DIE offset
+ | 0x........ | uint32_t HashData[2] DIE offset
+ | 0x........ | uint32_t HashData[3] DIE offset
+ | 0x00000000 | uint32_t KeyType (end of hash chain)
+ `------------'
+
+If there are collisions, you will have multiple valid string offsets:
+
+.. code-block:: none
+
+ .------------.
+ | 0x00001023 | uint32_t KeyType (.debug_str[0x0001023] => "main")
+ | 0x00000004 | uint32_t HashData count
+ | 0x........ | uint32_t HashData[0] DIE offset
+ | 0x........ | uint32_t HashData[1] DIE offset
+ | 0x........ | uint32_t HashData[2] DIE offset
+ | 0x........ | uint32_t HashData[3] DIE offset
+ | 0x00002023 | uint32_t KeyType (.debug_str[0x0002023] => "print")
+ | 0x00000002 | uint32_t HashData count
+ | 0x........ | uint32_t HashData[0] DIE offset
+ | 0x........ | uint32_t HashData[1] DIE offset
+ | 0x00000000 | uint32_t KeyType (end of hash chain)
+ `------------'
+
+Current testing with real world C++ binaries has shown that there is around 1
+32 bit hash collision per 100,000 name entries.
+
+Contents
+^^^^^^^^
+
+As we said, we want to strictly define exactly what is included in the
+different tables. For DWARF, we have 3 tables: "``.apple_names``",
+"``.apple_types``", and "``.apple_namespaces``".
+
+"``.apple_names``" sections should contain an entry for each DWARF DIE whose
+``DW_TAG`` is a ``DW_TAG_label``, ``DW_TAG_inlined_subroutine``, or
+``DW_TAG_subprogram`` that has address attributes: ``DW_AT_low_pc``,
+``DW_AT_high_pc``, ``DW_AT_ranges`` or ``DW_AT_entry_pc``. It also contains
+``DW_TAG_variable`` DIEs that have a ``DW_OP_addr`` in the location (global and
+static variables). All global and static variables should be included,
+including those scoped within functions and classes. For example using the
+following code:
+
+.. code-block:: c
+
+ static int var = 0;
+
+ void f ()
+ {
+ static int var = 0;
+ }
+
+Both of the static ``var`` variables would be included in the table. All
+functions should emit both their full names and their basenames. For C or C++,
+the full name is the mangled name (if available) which is usually in the
+``DW_AT_MIPS_linkage_name`` attribute, and the ``DW_AT_name`` contains the
+function basename. If global or static variables have a mangled name in a
+``DW_AT_MIPS_linkage_name`` attribute, this should be emitted along with the
+simple name found in the ``DW_AT_name`` attribute.
+
+"``.apple_types``" sections should contain an entry for each DWARF DIE whose
+tag is one of:
+
+* DW_TAG_array_type
+* DW_TAG_class_type
+* DW_TAG_enumeration_type
+* DW_TAG_pointer_type
+* DW_TAG_reference_type
+* DW_TAG_string_type
+* DW_TAG_structure_type
+* DW_TAG_subroutine_type
+* DW_TAG_typedef
+* DW_TAG_union_type
+* DW_TAG_ptr_to_member_type
+* DW_TAG_set_type
+* DW_TAG_subrange_type
+* DW_TAG_base_type
+* DW_TAG_const_type
+* DW_TAG_constant
+* DW_TAG_file_type
+* DW_TAG_namelist
+* DW_TAG_packed_type
+* DW_TAG_volatile_type
+* DW_TAG_restrict_type
+* DW_TAG_interface_type
+* DW_TAG_unspecified_type
+* DW_TAG_shared_type
+
+Only entries with a ``DW_AT_name`` attribute are included, and the entry must
+not be a forward declaration (``DW_AT_declaration`` attribute with a non-zero
+value). For example, using the following code:
+
+.. code-block:: c
+
+ int main ()
+ {
+ int *b = 0;
+ return *b;
+ }
+
+We get a few type DIEs:
+
+.. code-block:: none
+
+ 0x00000067: TAG_base_type [5]
+ AT_encoding( DW_ATE_signed )
+ AT_name( "int" )
+ AT_byte_size( 0x04 )
+
+ 0x0000006e: TAG_pointer_type [6]
+ AT_type( {0x00000067} ( int ) )
+ AT_byte_size( 0x08 )
+
+The DW_TAG_pointer_type is not included because it does not have a ``DW_AT_name``.
+
+"``.apple_namespaces``" section should contain all ``DW_TAG_namespace`` DIEs.
+If we run into a namespace that has no name this is an anonymous namespace, and
+the name should be output as "``(anonymous namespace)``" (without the quotes).
+Why? This matches the output of the ``abi::cxa_demangle()`` that is in the
+standard C++ library that demangles mangled names.
+
+
+Language Extensions and File Format Changes
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Objective-C Extensions
+""""""""""""""""""""""
+
+"``.apple_objc``" section should contain all ``DW_TAG_subprogram`` DIEs for an
+Objective-C class. The name used in the hash table is the name of the
+Objective-C class itself. If the Objective-C class has a category, then an
+entry is made for both the class name without the category, and for the class
+name with the category. So if we have a DIE at offset 0x1234 with a name of
+method "``-[NSString(my_additions) stringWithSpecialString:]``", we would add
+an entry for "``NSString``" that points to DIE 0x1234, and an entry for
+"``NSString(my_additions)``" that points to 0x1234. This allows us to quickly
+track down all Objective-C methods for an Objective-C class when doing
+expressions. It is needed because of the dynamic nature of Objective-C where
+anyone can add methods to a class. The DWARF for Objective-C methods is also
+emitted differently from C++ classes where the methods are not usually
+contained in the class definition, they are scattered about across one or more
+compile units. Categories can also be defined in different shared libraries.
+So we need to be able to quickly find all of the methods and class functions
+given the Objective-C class name, or quickly find all methods and class
+functions for a class + category name. This table does not contain any
+selector names, it just maps Objective-C class names (or class names +
+category) to all of the methods and class functions. The selectors are added
+as function basenames in the "``.debug_names``" section.
+
+In the "``.apple_names``" section for Objective-C functions, the full name is
+the entire function name with the brackets ("``-[NSString
+stringWithCString:]``") and the basename is the selector only
+("``stringWithCString:``").
+
+Mach-O Changes
+""""""""""""""
+
+The sections names for the apple hash tables are for non-mach-o files. For
+mach-o files, the sections should be contained in the ``__DWARF`` segment with
+names as follows:
+
+* "``.apple_names``" -> "``__apple_names``"
+* "``.apple_types``" -> "``__apple_types``"
+* "``.apple_namespaces``" -> "``__apple_namespac``" (16 character limit)
+* "``.apple_objc``" -> "``__apple_objc``"
+
Added: www-releases/trunk/3.6.1/docs/_sources/SphinxQuickstartTemplate.txt
URL: http://llvm.org/viewvc/llvm-project/www-releases/trunk/3.6.1/docs/_sources/SphinxQuickstartTemplate.txt?rev=238135&view=auto
==============================================================================
--- www-releases/trunk/3.6.1/docs/_sources/SphinxQuickstartTemplate.txt (added)
+++ www-releases/trunk/3.6.1/docs/_sources/SphinxQuickstartTemplate.txt Mon May 25 08:53:02 2015
@@ -0,0 +1,160 @@
+==========================
+Sphinx Quickstart Template
+==========================
+
+Introduction and Quickstart
+===========================
+
+This document is meant to get you writing documentation as fast as possible
+even if you have no previous experience with Sphinx. The goal is to take
+someone in the state of "I want to write documentation and get it added to
+LLVM's docs" and turn that into useful documentation mailed to llvm-commits
+with as little nonsense as possible.
+
+You can find this document in ``docs/SphinxQuickstartTemplate.rst``. You
+should copy it, open the new file in your text editor, write your docs, and
+then send the new document to llvm-commits for review.
+
+Focus on *content*. It is easy to fix the Sphinx (reStructuredText) syntax
+later if necessary, although reStructuredText tries to imitate common
+plain-text conventions so it should be quite natural. A basic knowledge of
+reStructuredText syntax is useful when writing the document, so the last
+~half of this document (starting with `Example Section`_) gives examples
+which should cover 99% of use cases.
+
+Let me say that again: focus on *content*. But if you really need to verify
+Sphinx's output, see ``docs/README.txt`` for information.
+
+Once you have finished with the content, please send the ``.rst`` file to
+llvm-commits for review.
+
+Guidelines
+==========
+
+Try to answer the following questions in your first section:
+
+#. Why would I want to read this document?
+
+#. What should I know to be able to follow along with this document?
+
+#. What will I have learned by the end of this document?
+
+Common names for the first section are ``Introduction``, ``Overview``, or
+``Background``.
+
+If possible, make your document a "how to". Give it a name ``HowTo*.rst``
+like the other "how to" documents. This format is usually the easiest
+for another person to understand and also the most useful.
+
+You generally should not be writing documentation other than a "how to"
+unless there is already a "how to" about your topic. The reason for this
+is that without a "how to" document to read first, it is difficult for a
+person to understand a more advanced document.
+
+Focus on content (yes, I had to say it again).
+
+The rest of this document shows example reStructuredText markup constructs
+that are meant to be read by you in your text editor after you have copied
+this file into a new file for the documentation you are about to write.
+
+Example Section
+===============
+
+Your text can be *emphasized*, **bold**, or ``monospace``.
+
+Use blank lines to separate paragraphs.
+
+Headings (like ``Example Section`` just above) give your document its
+structure. Use the same kind of adornments (e.g. ``======`` vs. ``------``)
+as are used in this document. The adornment must be the same length as the
+text above it. For Vim users, variations of ``yypVr=`` might be handy.
+
+Example Subsection
+------------------
+
+Make a link `like this <http://llvm.org/>`_. There is also a more
+sophisticated syntax which `can be more readable`_ for longer links since
+it disrupts the flow less. You can put the ``.. _`link text`: <URL>`` block
+pretty much anywhere later in the document.
+
+.. _`can be more readable`: http://en.wikipedia.org/wiki/LLVM
+
+Lists can be made like this:
+
+#. A list starting with ``#.`` will be automatically numbered.
+
+#. This is a second list element.
+
+ #. Use indentation to create nested lists.
+
+You can also use unordered lists.
+
+* Stuff.
+
+ + Deeper stuff.
+
+* More stuff.
+
+Example Subsubsection
+^^^^^^^^^^^^^^^^^^^^^
+
+You can make blocks of code like this:
+
+.. code-block:: c++
+
+ int main() {
+ return 0;
+ }
+
+For a shell session, use a ``console`` code block (some existing docs use
+``bash``):
+
+.. code-block:: console
+
+ $ echo "Goodbye cruel world!"
+ $ rm -rf /
+
+If you need to show LLVM IR use the ``llvm`` code block.
+
+.. code-block:: llvm
+
+ define i32 @test1() {
+ entry:
+ ret i32 0
+ }
+
+Some other common code blocks you might need are ``c``, ``objc``, ``make``,
+and ``cmake``. If you need something beyond that, you can look at the `full
+list`_ of supported code blocks.
+
+.. _`full list`: http://pygments.org/docs/lexers/
+
+However, don't waste time fiddling with syntax highlighting when you could
+be adding meaningful content. When in doubt, show preformatted text
+without any syntax highlighting like this:
+
+::
+
+ .
+ +:.
+ ..:: ::
+ .++:+:: ::+:.:.
+ .:+ :
+ ::.::..:: .+.
+ ..:+ :: :
+ ......+:. ..
+ :++. .. :
+ .+:::+:: :
+ .. . .+ ::
+ +.: .::+.
+ ...+. .: .
+ .++:..
+ ...
+
+Hopefully you won't need to be this deep
+""""""""""""""""""""""""""""""""""""""""
+
+If you need to do fancier things than what has been shown in this document,
+you can mail the list or check Sphinx's `reStructuredText Primer`_.
+
+.. _`reStructuredText Primer`: http://sphinx.pocoo.org/rest.html
Added: www-releases/trunk/3.6.1/docs/_sources/StackMaps.txt
URL: http://llvm.org/viewvc/llvm-project/www-releases/trunk/3.6.1/docs/_sources/StackMaps.txt?rev=238135&view=auto
==============================================================================
--- www-releases/trunk/3.6.1/docs/_sources/StackMaps.txt (added)
+++ www-releases/trunk/3.6.1/docs/_sources/StackMaps.txt Mon May 25 08:53:02 2015
@@ -0,0 +1,502 @@
+===================================
+Stack maps and patch points in LLVM
+===================================
+
+.. contents::
+ :local:
+ :depth: 2
+
+Definitions
+===========
+
+In this document we refer to the "runtime" collectively as all
+components that serve as the LLVM client, including the LLVM IR
+generator, object code consumer, and code patcher.
+
+A stack map records the location of ``live values`` at a particular
+instruction address. These ``live values`` do not refer to all the
+LLVM values live across the stack map. Instead, they are only the
+values that the runtime requires to be live at this point. For
+example, they may be the values the runtime will need to resume
+program execution at that point independent of the compiled function
+containing the stack map.
+
+LLVM emits stack map data into the object code within a designated
+:ref:`stackmap-section`. This stack map data contains a record for
+each stack map. The record stores the stack map's instruction address
+and contains a entry for each mapped value. Each entry encodes a
+value's location as a register, stack offset, or constant.
+
+A patch point is an instruction address at which space is reserved for
+patching a new instruction sequence at run time. Patch points look
+much like calls to LLVM. They take arguments that follow a calling
+convention and may return a value. They also imply stack map
+generation, which allows the runtime to locate the patchpoint and
+find the location of ``live values`` at that point.
+
+Motivation
+==========
+
+This functionality is currently experimental but is potentially useful
+in a variety of settings, the most obvious being a runtime (JIT)
+compiler. Example applications of the patchpoint intrinsics are
+implementing an inline call cache for polymorphic method dispatch or
+optimizing the retrieval of properties in dynamically typed languages
+such as JavaScript.
+
+The intrinsics documented here are currently used by the JavaScript
+compiler within the open source WebKit project, see the `FTL JIT
+<https://trac.webkit.org/wiki/FTLJIT>`_, but they are designed to be
+used whenever stack maps or code patching are needed. Because the
+intrinsics have experimental status, compatibility across LLVM
+releases is not guaranteed.
+
+The stack map functionality described in this document is separate
+from the functionality described in
+:ref:`stack-map`. `GCFunctionMetadata` provides the location of
+pointers into a collected heap captured by the `GCRoot` intrinsic,
+which can also be considered a "stack map". Unlike the stack maps
+defined above, the `GCFunctionMetadata` stack map interface does not
+provide a way to associate live register values of arbitrary type with
+an instruction address, nor does it specify a format for the resulting
+stack map. The stack maps described here could potentially provide
+richer information to a garbage collecting runtime, but that usage
+will not be discussed in this document.
+
+Intrinsics
+==========
+
+The following two kinds of intrinsics can be used to implement stack
+maps and patch points: ``llvm.experimental.stackmap`` and
+``llvm.experimental.patchpoint``. Both kinds of intrinsics generate a
+stack map record, and they both allow some form of code patching. They
+can be used independently (i.e. ``llvm.experimental.patchpoint``
+implicitly generates a stack map without the need for an additional
+call to ``llvm.experimental.stackmap``). The choice of which to use
+depends on whether it is necessary to reserve space for code patching
+and whether any of the intrinsic arguments should be lowered according
+to calling conventions. ``llvm.experimental.stackmap`` does not
+reserve any space, nor does it expect any call arguments. If the
+runtime patches code at the stack map's address, it will destructively
+overwrite the program text. This is unlike
+``llvm.experimental.patchpoint``, which reserves space for in-place
+patching without overwriting surrounding code. The
+``llvm.experimental.patchpoint`` intrinsic also lowers a specified
+number of arguments according to its calling convention. This allows
+patched code to make in-place function calls without marshaling.
+
+Each instance of one of these intrinsics generates a stack map record
+in the :ref:`stackmap-section`. The record includes an ID, allowing
+the runtime to uniquely identify the stack map, and the offset within
+the code from the beginning of the enclosing function.
+
+'``llvm.experimental.stackmap``' Intrinsic
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Syntax:
+"""""""
+
+::
+
+ declare void
+ @llvm.experimental.stackmap(i64 <id>, i32 <numShadowBytes>, ...)
+
+Overview:
+"""""""""
+
+The '``llvm.experimental.stackmap``' intrinsic records the location of
+specified values in the stack map without generating any code.
+
+Operands:
+"""""""""
+
+The first operand is an ID to be encoded within the stack map. The
+second operand is the number of shadow bytes following the
+intrinsic. The variable number of operands that follow are the ``live
+values`` for which locations will be recorded in the stack map.
+
+To use this intrinsic as a bare-bones stack map, with no code patching
+support, the number of shadow bytes can be set to zero.
+
+Semantics:
+""""""""""
+
+The stack map intrinsic generates no code in place, unless nops are
+needed to cover its shadow (see below). However, its offset from
+function entry is stored in the stack map. This is the relative
+instruction address immediately following the instructions that
+precede the stack map.
+
+The stack map ID allows a runtime to locate the desired stack map
+record. LLVM passes this ID through directly to the stack map
+record without checking uniqueness.
+
+LLVM guarantees a shadow of instructions following the stack map's
+instruction offset during which neither the end of the basic block nor
+another call to ``llvm.experimental.stackmap`` or
+``llvm.experimental.patchpoint`` may occur. This allows the runtime to
+patch the code at this point in response to an event triggered from
+outside the code. The code for instructions following the stack map
+may be emitted in the stack map's shadow, and these instructions may
+be overwritten by destructive patching. Without shadow bytes, this
+destructive patching could overwrite program text or data outside the
+current function. We disallow overlapping stack map shadows so that
+the runtime does not need to consider this corner case.
+
+For example, a stack map with 8 byte shadow:
+
+.. code-block:: llvm
+
+ call void @runtime()
+ call void (i64, i32, ...)* @llvm.experimental.stackmap(i64 77, i32 8,
+ i64* %ptr)
+ %val = load i64* %ptr
+ %add = add i64 %val, 3
+ ret i64 %add
+
+May require one byte of nop-padding:
+
+.. code-block:: none
+
+ 0x00 callq _runtime
+ 0x05 nop <--- stack map address
+ 0x06 movq (%rdi), %rax
+ 0x07 addq $3, %rax
+ 0x0a popq %rdx
+ 0x0b ret <---- end of 8-byte shadow
+
+Now, if the runtime needs to invalidate the compiled code, it may
+patch 8 bytes of code at the stack map's address at follows:
+
+.. code-block:: none
+
+ 0x00 callq _runtime
+ 0x05 movl $0xffff, %rax <--- patched code at stack map address
+ 0x0a callq *%rax <---- end of 8-byte shadow
+
+This way, after the normal call to the runtime returns, the code will
+execute a patched call to a special entry point that can rebuild a
+stack frame from the values located by the stack map.
+
+'``llvm.experimental.patchpoint.*``' Intrinsic
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Syntax:
+"""""""
+
+::
+
+ declare void
+ @llvm.experimental.patchpoint.void(i64 <id>, i32 <numBytes>,
+ i8* <target>, i32 <numArgs>, ...)
+ declare i64
+ @llvm.experimental.patchpoint.i64(i64 <id>, i32 <numBytes>,
+ i8* <target>, i32 <numArgs>, ...)
+
+Overview:
+"""""""""
+
+The '``llvm.experimental.patchpoint.*``' intrinsics creates a function
+call to the specified ``<target>`` and records the location of specified
+values in the stack map.
+
+Operands:
+"""""""""
+
+The first operand is an ID, the second operand is the number of bytes
+reserved for the patchable region, the third operand is the target
+address of a function (optionally null), and the fourth operand
+specifies how many of the following variable operands are considered
+function call arguments. The remaining variable number of operands are
+the ``live values`` for which locations will be recorded in the stack
+map.
+
+Semantics:
+""""""""""
+
+The patch point intrinsic generates a stack map. It also emits a
+function call to the address specified by ``<target>`` if the address
+is not a constant null. The function call and its arguments are
+lowered according to the calling convention specified at the
+intrinsic's callsite. Variants of the intrinsic with non-void return
+type also return a value according to calling convention.
+
+On PowerPC, note that the ``<target>`` must be the actual intended target of
+the indirect call, not the function-descriptor address normally used as the
+C/C++ function-pointer representation. As a result, the call target must be
+local because no adjustment or restoration of the TOC pointer (in register r2)
+will be performed.
+
+Requesting zero patch point arguments is valid. In this case, all
+variable operands are handled just like
+``llvm.experimental.stackmap.*``. The difference is that space will
+still be reserved for patching, a call will be emitted, and a return
+value is allowed.
+
+The location of the arguments are not normally recorded in the stack
+map because they are already fixed by the calling convention. The
+remaining ``live values`` will have their location recorded, which
+could be a register, stack location, or constant. A special calling
+convention has been introduced for use with stack maps, anyregcc,
+which forces the arguments to be loaded into registers but allows
+those register to be dynamically allocated. These argument registers
+will have their register locations recorded in the stack map in
+addition to the remaining ``live values``.
+
+The patch point also emits nops to cover at least ``<numBytes>`` of
+instruction encoding space. Hence, the client must ensure that
+``<numBytes>`` is enough to encode a call to the target address on the
+supported targets. If the call target is constant null, then there is
+no minimum requirement. A zero-byte null target patchpoint is
+valid.
+
+The runtime may patch the code emitted for the patch point, including
+the call sequence and nops. However, the runtime may not assume
+anything about the code LLVM emits within the reserved space. Partial
+patching is not allowed. The runtime must patch all reserved bytes,
+padding with nops if necessary.
+
+This example shows a patch point reserving 15 bytes, with one argument
+in $rdi, and a return value in $rax per native calling convention:
+
+.. code-block:: llvm
+
+ %target = inttoptr i64 -281474976710654 to i8*
+ %val = call i64 (i64, i32, ...)*
+ @llvm.experimental.patchpoint.i64(i64 78, i32 15,
+ i8* %target, i32 1, i64* %ptr)
+ %add = add i64 %val, 3
+ ret i64 %add
+
+May generate:
+
+.. code-block:: none
+
+ 0x00 movabsq $0xffff000000000002, %r11 <--- patch point address
+ 0x0a callq *%r11
+ 0x0d nop
+ 0x0e nop <--- end of reserved 15-bytes
+ 0x0f addq $0x3, %rax
+ 0x10 movl %rax, 8(%rsp)
+
+Note that no stack map locations will be recorded. If the patched code
+sequence does not need arguments fixed to specific calling convention
+registers, then the ``anyregcc`` convention may be used:
+
+.. code-block:: none
+
+ %val = call anyregcc @llvm.experimental.patchpoint(i64 78, i32 15,
+ i8* %target, i32 1,
+ i64* %ptr)
+
+The stack map now indicates the location of the %ptr argument and
+return value:
+
+.. code-block:: none
+
+ Stack Map: ID=78, Loc0=%r9 Loc1=%r8
+
+The patch code sequence may now use the argument that happened to be
+allocated in %r8 and return a value allocated in %r9:
+
+.. code-block:: none
+
+ 0x00 movslq 4(%r8) %r9 <--- patched code at patch point address
+ 0x03 nop
+ ...
+ 0x0e nop <--- end of reserved 15-bytes
+ 0x0f addq $0x3, %r9
+ 0x10 movl %r9, 8(%rsp)
+
+.. _stackmap-format:
+
+Stack Map Format
+================
+
+The existence of a stack map or patch point intrinsic within an LLVM
+Module forces code emission to create a :ref:`stackmap-section`. The
+format of this section follows:
+
+.. code-block:: none
+
+ Header {
+ uint8 : Stack Map Version (current version is 1)
+ uint8 : Reserved (expected to be 0)
+ uint16 : Reserved (expected to be 0)
+ }
+ uint32 : NumFunctions
+ uint32 : NumConstants
+ uint32 : NumRecords
+ StkSizeRecord[NumFunctions] {
+ uint64 : Function Address
+ uint64 : Stack Size
+ }
+ Constants[NumConstants] {
+ uint64 : LargeConstant
+ }
+ StkMapRecord[NumRecords] {
+ uint64 : PatchPoint ID
+ uint32 : Instruction Offset
+ uint16 : Reserved (record flags)
+ uint16 : NumLocations
+ Location[NumLocations] {
+ uint8 : Register | Direct | Indirect | Constant | ConstantIndex
+ uint8 : Reserved (location flags)
+ uint16 : Dwarf RegNum
+ int32 : Offset or SmallConstant
+ }
+ uint16 : Padding
+ uint16 : NumLiveOuts
+ LiveOuts[NumLiveOuts]
+ uint16 : Dwarf RegNum
+ uint8 : Reserved
+ uint8 : Size in Bytes
+ }
+ uint32 : Padding (only if required to align to 8 byte)
+ }
+
+The first byte of each location encodes a type that indicates how to
+interpret the ``RegNum`` and ``Offset`` fields as follows:
+
+======== ========== =================== ===========================
+Encoding Type Value Description
+-------- ---------- ------------------- ---------------------------
+0x1 Register Reg Value in a register
+0x2 Direct Reg + Offset Frame index value
+0x3 Indirect [Reg + Offset] Spilled value
+0x4 Constant Offset Small constant
+0x5 ConstIndex Constants[Offset] Large constant
+======== ========== =================== ===========================
+
+In the common case, a value is available in a register, and the
+``Offset`` field will be zero. Values spilled to the stack are encoded
+as ``Indirect`` locations. The runtime must load those values from a
+stack address, typically in the form ``[BP + Offset]``. If an
+``alloca`` value is passed directly to a stack map intrinsic, then
+LLVM may fold the frame index into the stack map as an optimization to
+avoid allocating a register or stack slot. These frame indices will be
+encoded as ``Direct`` locations in the form ``BP + Offset``. LLVM may
+also optimize constants by emitting them directly in the stack map,
+either in the ``Offset`` of a ``Constant`` location or in the constant
+pool, referred to by ``ConstantIndex`` locations.
+
+At each callsite, a "liveout" register list is also recorded. These
+are the registers that are live across the stackmap and therefore must
+be saved by the runtime. This is an important optimization when the
+patchpoint intrinsic is used with a calling convention that by default
+preserves most registers as callee-save.
+
+Each entry in the liveout register list contains a DWARF register
+number and size in bytes. The stackmap format deliberately omits
+specific subregister information. Instead the runtime must interpret
+this information conservatively. For example, if the stackmap reports
+one byte at ``%rax``, then the value may be in either ``%al`` or
+``%ah``. It doesn't matter in practice, because the runtime will
+simply save ``%rax``. However, if the stackmap reports 16 bytes at
+``%ymm0``, then the runtime can safely optimize by saving only
+``%xmm0``.
+
+The stack map format is a contract between an LLVM SVN revision and
+the runtime. It is currently experimental and may change in the short
+term, but minimizing the need to update the runtime is
+important. Consequently, the stack map design is motivated by
+simplicity and extensibility. Compactness of the representation is
+secondary because the runtime is expected to parse the data
+immediately after compiling a module and encode the information in its
+own format. Since the runtime controls the allocation of sections, it
+can reuse the same stack map space for multiple modules.
+
+Stackmap support is currently only implemented for 64-bit
+platforms. However, a 32-bit implementation should be able to use the
+same format with an insignificant amount of wasted space.
+
+.. _stackmap-section:
+
+Stack Map Section
+^^^^^^^^^^^^^^^^^
+
+A JIT compiler can easily access this section by providing its own
+memory manager via the LLVM C API
+``LLVMCreateSimpleMCJITMemoryManager()``. When creating the memory
+manager, the JIT provides a callback:
+``LLVMMemoryManagerAllocateDataSectionCallback()``. When LLVM creates
+this section, it invokes the callback and passes the section name. The
+JIT can record the in-memory address of the section at this time and
+later parse it to recover the stack map data.
+
+On Darwin, the stack map section name is "__llvm_stackmaps". The
+segment name is "__LLVM_STACKMAPS".
+
+Stack Map Usage
+===============
+
+The stack map support described in this document can be used to
+precisely determine the location of values at a specific position in
+the code. LLVM does not maintain any mapping between those values and
+any higher-level entity. The runtime must be able to interpret the
+stack map record given only the ID, offset, and the order of the
+locations, which LLVM preserves.
+
+Note that this is quite different from the goal of debug information,
+which is a best-effort attempt to track the location of named
+variables at every instruction.
+
+An important motivation for this design is to allow a runtime to
+commandeer a stack frame when execution reaches an instruction address
+associated with a stack map. The runtime must be able to rebuild a
+stack frame and resume program execution using the information
+provided by the stack map. For example, execution may resume in an
+interpreter or a recompiled version of the same function.
+
+This usage restricts LLVM optimization. Clearly, LLVM must not move
+stores across a stack map. However, loads must also be handled
+conservatively. If the load may trigger an exception, hoisting it
+above a stack map could be invalid. For example, the runtime may
+determine that a load is safe to execute without a type check given
+the current state of the type system. If the type system changes while
+some activation of the load's function exists on the stack, the load
+becomes unsafe. The runtime can prevent subsequent execution of that
+load by immediately patching any stack map location that lies between
+the current call site and the load (typically, the runtime would
+simply patch all stack map locations to invalidate the function). If
+the compiler had hoisted the load above the stack map, then the
+program could crash before the runtime could take back control.
+
+To enforce these semantics, stackmap and patchpoint intrinsics are
+considered to potentially read and write all memory. This may limit
+optimization more than some clients desire. This limitation may be
+avoided by marking the call site as "readonly". In the future we may
+also allow meta-data to be added to the intrinsic call to express
+aliasing, thereby allowing optimizations to hoist certain loads above
+stack maps.
+
+Direct Stack Map Entries
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+As shown in :ref:`stackmap-section`, a Direct stack map location
+records the address of frame index. This address is itself the value
+that the runtime requested. This differs from Indirect locations,
+which refer to a stack locations from which the requested values must
+be loaded. Direct locations can communicate the address if an alloca,
+while Indirect locations handle register spills.
+
+For example:
+
+.. code-block:: none
+
+ entry:
+ %a = alloca i64...
+ llvm.experimental.stackmap(i64 <ID>, i32 <shadowBytes>, i64* %a)
+
+The runtime can determine this alloca's relative location on the
+stack immediately after compilation, or at any time thereafter. This
+differs from Register and Indirect locations, because the runtime can
+only read the values in those locations when execution reaches the
+instruction address of the stack map.
+
+This functionality requires LLVM to treat entry-block allocas
+specially when they are directly consumed by an intrinsics. (This is
+the same requirement imposed by the llvm.gcroot intrinsic.) LLVM
+transformations must not substitute the alloca with any intervening
+value. This can be verified by the runtime simply by checking that the
+stack map's location is a Direct location type.
Added: www-releases/trunk/3.6.1/docs/_sources/Statepoints.txt
URL: http://llvm.org/viewvc/llvm-project/www-releases/trunk/3.6.1/docs/_sources/Statepoints.txt?rev=238135&view=auto
==============================================================================
--- www-releases/trunk/3.6.1/docs/_sources/Statepoints.txt (added)
+++ www-releases/trunk/3.6.1/docs/_sources/Statepoints.txt Mon May 25 08:53:02 2015
@@ -0,0 +1,411 @@
+=====================================
+Garbage Collection Safepoints in LLVM
+=====================================
+
+.. contents::
+ :local:
+ :depth: 2
+
+Status
+=======
+
+This document describes a set of experimental extensions to LLVM. Use
+with caution. Because the intrinsics have experimental status,
+compatibility across LLVM releases is not guaranteed.
+
+LLVM currently supports an alternate mechanism for conservative
+garbage collection support using the gc_root intrinsic. The mechanism
+described here shares little in common with the alternate
+implementation and it is hoped that this mechanism will eventually
+replace the gc_root mechanism.
+
+Overview
+========
+
+To collect dead objects, garbage collectors must be able to identify
+any references to objects contained within executing code, and,
+depending on the collector, potentially update them. The collector
+does not need this information at all points in code - that would make
+the problem much harder - but only at well-defined points in the
+execution known as 'safepoints' For most collectors, it is sufficient
+to track at least one copy of each unique pointer value. However, for
+a collector which wishes to relocate objects directly reachable from
+running code, a higher standard is required.
+
+One additional challenge is that the compiler may compute intermediate
+results ("derived pointers") which point outside of the allocation or
+even into the middle of another allocation. The eventual use of this
+intermediate value must yield an address within the bounds of the
+allocation, but such "exterior derived pointers" may be visible to the
+collector. Given this, a garbage collector can not safely rely on the
+runtime value of an address to indicate the object it is associated
+with. If the garbage collector wishes to move any object, the
+compiler must provide a mapping, for each pointer, to an indication of
+its allocation.
+
+To simplify the interaction between a collector and the compiled code,
+most garbage collectors are organized in terms of three abstractions:
+load barriers, store barriers, and safepoints.
+
+#. A load barrier is a bit of code executed immediately after the
+ machine load instruction, but before any use of the value loaded.
+ Depending on the collector, such a barrier may be needed for all
+ loads, merely loads of a particular type (in the original source
+ language), or none at all.
+
+#. Analogously, a store barrier is a code fragement that runs
+ immediately before the machine store instruction, but after the
+ computation of the value stored. The most common use of a store
+ barrier is to update a 'card table' in a generational garbage
+ collector.
+
+#. A safepoint is a location at which pointers visible to the compiled
+ code (i.e. currently in registers or on the stack) are allowed to
+ change. After the safepoint completes, the actual pointer value
+ may differ, but the 'object' (as seen by the source language)
+ pointed to will not.
+
+ Note that the term 'safepoint' is somewhat overloaded. It refers to
+ both the location at which the machine state is parsable and the
+ coordination protocol involved in bring application threads to a
+ point at which the collector can safely use that information. The
+ term "statepoint" as used in this document refers exclusively to the
+ former.
+
+This document focuses on the last item - compiler support for
+safepoints in generated code. We will assume that an outside
+mechanism has decided where to place safepoints. From our
+perspective, all safepoints will be function calls. To support
+relocation of objects directly reachable from values in compiled code,
+the collector must be able to:
+
+#. identify every copy of a pointer (including copies introduced by
+ the compiler itself) at the safepoint,
+#. identify which object each pointer relates to, and
+#. potentially update each of those copies.
+
+This document describes the mechanism by which an LLVM based compiler
+can provide this information to a language runtime/collector, and
+ensure that all pointers can be read and updated if desired. The
+heart of the approach is to construct (or rewrite) the IR in a manner
+where the possible updates performed by the garbage collector are
+explicitly visible in the IR. Doing so requires that we:
+
+#. create a new SSA value for each potentially relocated pointer, and
+ ensure that no uses of the original (non relocated) value is
+ reachable after the safepoint,
+#. specify the relocation in a way which is opaque to the compiler to
+ ensure that the optimizer can not introduce new uses of an
+ unrelocated value after a statepoint. This prevents the optimizer
+ from performing unsound optimizations.
+#. recording a mapping of live pointers (and the allocation they're
+ associated with) for each statepoint.
+
+At the most abstract level, inserting a safepoint can be thought of as
+replacing a call instruction with a call to a multiple return value
+function which both calls the original target of the call, returns
+it's result, and returns updated values for any live pointers to
+garbage collected objects.
+
+ Note that the task of identifying all live pointers to garbage
+ collected values, transforming the IR to expose a pointer giving the
+ base object for every such live pointer, and inserting all the
+ intrinsics correctly is explicitly out of scope for this document.
+ The recommended approach is described in the section of Late
+ Safepoint Placement below.
+
+This abstract function call is concretely represented by a sequence of
+intrinsic calls known as a 'statepoint sequence'.
+
+
+Let's consider a simple call in LLVM IR:
+ todo
+
+Depending on our language we may need to allow a safepoint during the
+execution of the function called from this site. If so, we need to
+let the collector update local values in the current frame.
+
+Let's say we need to relocate SSA values 'a', 'b', and 'c' at this
+safepoint. To represent this, we would generate the statepoint
+sequence:
+
+ todo
+
+Ideally, this sequence would have been represented as a M argument, N
+return value function (where M is the number of values being
+relocated + the original call arguments and N is the original return
+value + each relocated value), but LLVM does not easily support such a
+representation.
+
+Instead, the statepoint intrinsic marks the actual site of the
+safepoint or statepoint. The statepoint returns a token value (which
+exists only at compile time). To get back the original return value
+of the call, we use the 'gc.result' intrinsic. To get the relocation
+of each pointer in turn, we use the 'gc.relocate' intrinsic with the
+appropriate index. Note that both the gc.relocate and gc.result are
+tied to the statepoint. The combination forms a "statepoint sequence"
+and represents the entitety of a parseable call or 'statepoint'.
+
+When lowered, this example would generate the following x86 assembly::
+ put assembly here
+
+Each of the potentially relocated values has been spilled to the
+stack, and a record of that location has been recorded to the
+:ref:`Stack Map section <stackmap-section>`. If the garbage collector
+needs to update any of these pointers during the call, it knows
+exactly what to change.
+
+Intrinsics
+===========
+
+'''gc.statepoint''' Intrinsic
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Syntax:
+"""""""
+
+::
+
+ declare i32
+ @gc.statepoint(func_type <target>, i64 <#call args>.
+ i64 <unused>, ... (call parameters),
+ i64 <# deopt args>, ... (deopt parameters),
+ ... (gc parameters))
+
+Overview:
+"""""""""
+
+The statepoint intrinsic represents a call which is parse-able by the
+runtime.
+
+Operands:
+"""""""""
+
+The 'target' operand is the function actually being called. The
+target can be specified as either a symbolic LLVM function, or as an
+arbitrary Value of appropriate function type. Note that the function
+type must match the signature of the callee and the types of the 'call
+parameters' arguments.
+
+The '#call args' operand is the number of arguments to the actual
+call. It must exactly match the number of arguments passed in the
+'call parameters' variable length section.
+
+The 'unused' operand is unused and likely to be removed. Please do
+not use.
+
+The 'call parameters' arguments are simply the arguments which need to
+be passed to the call target. They will be lowered according to the
+specified calling convention and otherwise handled like a normal call
+instruction. The number of arguments must exactly match what is
+specified in '# call args'. The types must match the signature of
+'target'.
+
+The 'deopt parameters' arguments contain an arbitrary list of Values
+which is meaningful to the runtime. The runtime may read any of these
+values, but is assumed not to modify them. If the garbage collector
+might need to modify one of these values, it must also be listed in
+the 'gc pointer' argument list. The '# deopt args' field indicates
+how many operands are to be interpreted as 'deopt parameters'.
+
+The 'gc parameters' arguments contain every pointer to a garbage
+collector object which potentially needs to be updated by the garbage
+collector. Note that the argument list must explicitly contain a base
+pointer for every derived pointer listed. The order of arguments is
+unimportant. Unlike the other variable length parameter sets, this
+list is not length prefixed.
+
+Semantics:
+""""""""""
+
+A statepoint is assumed to read and write all memory. As a result,
+memory operations can not be reordered past a statepoint. It is
+illegal to mark a statepoint as being either 'readonly' or 'readnone'.
+
+Note that legal IR can not perform any memory operation on a 'gc
+pointer' argument of the statepoint in a location statically reachable
+from the statepoint. Instead, the explicitly relocated value (from a
+''gc.relocate'') must be used.
+
+'''gc.result''' Intrinsic
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Syntax:
+"""""""
+
+::
+
+ declare type*
+ @gc.result_ptr(i32 %statepoint_token)
+
+ declare fX
+ @gc.result_float(i32 %statepoint_token)
+
+ declare iX
+ @gc.result_int(i32 %statepoint_token)
+
+Overview:
+"""""""""
+
+'''gc.result''' extracts the result of the original call instruction
+which was replaced by the '''gc.statepoint'''. The '''gc.result'''
+intrinsic is actually a family of three intrinsics due to an
+implementation limitation. Other than the type of the return value,
+the semantics are the same.
+
+Operands:
+"""""""""
+
+The first and only argument is the '''gc.statepoint''' which starts
+the safepoint sequence of which this '''gc.result'' is a part.
+Despite the typing of this as a generic i32, *only* the value defined
+by a '''gc.statepoint''' is legal here.
+
+Semantics:
+""""""""""
+
+The ''gc.result'' represents the return value of the call target of
+the ''statepoint''. The type of the ''gc.result'' must exactly match
+the type of the target. If the call target returns void, there will
+be no ''gc.result''.
+
+A ''gc.result'' is modeled as a 'readnone' pure function. It has no
+side effects since it is just a projection of the return value of the
+previous call represented by the ''gc.statepoint''.
+
+'''gc.relocate''' Intrinsic
+^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Syntax:
+"""""""
+
+::
+
+ declare <type> addrspace(1)*
+ @gc.relocate(i32 %statepoint_token, i32 %base_offset, i32 %pointer_offset)
+
+Overview:
+"""""""""
+
+A ''gc.relocate'' returns the potentially relocated value of a pointer
+at the safepoint.
+
+Operands:
+"""""""""
+
+The first argument is the '''gc.statepoint''' which starts the
+safepoint sequence of which this '''gc.relocation'' is a part.
+Despite the typing of this as a generic i32, *only* the value defined
+by a '''gc.statepoint''' is legal here.
+
+The second argument is an index into the statepoints list of arguments
+which specifies the base pointer for the pointer being relocated.
+This index must land within the 'gc parameter' section of the
+statepoint's argument list.
+
+The third argument is an index into the statepoint's list of arguments
+which specify the (potentially) derived pointer being relocated. It
+is legal for this index to be the same as the second argument
+if-and-only-if a base pointer is being relocated. This index must land
+within the 'gc parameter' section of the statepoint's argument list.
+
+Semantics:
+""""""""""
+
+The return value of ''gc.relocate'' is the potentially relocated value
+of the pointer specified by it's arguments. It is unspecified how the
+value of the returned pointer relates to the argument to the
+''gc.statepoint'' other than that a) it points to the same source
+language object with the same offset, and b) the 'based-on'
+relationship of the newly relocated pointers is a projection of the
+unrelocated pointers. In particular, the integer value of the pointer
+returned is unspecified.
+
+A ''gc.relocate'' is modeled as a 'readnone' pure function. It has no
+side effects since it is just a way to extract information about work
+done during the actual call modeled by the ''gc.statepoint''.
+
+
+Stack Map Format
+================
+
+Locations for each pointer value which may need read and/or updated by
+the runtime or collector are provided via the :ref:`Stack Map format
+<stackmap-format>` specified in the PatchPoint documentation.
+
+Each statepoint generates the following Locations:
+
+* Constant which describes number of following deopt *Locations* (not
+ operands)
+* Variable number of Locations, one for each deopt parameter listed in
+ the IR statepoint (same number as described by previous Constant)
+* Variable number of Locations pairs, one pair for each unique pointer
+ which needs relocated. The first Location in each pair describes
+ the base pointer for the object. The second is the derived pointer
+ actually being relocated. It is guaranteed that the base pointer
+ must also appear explicitly as a relocation pair if used after the
+ statepoint. There may be fewer pairs then gc parameters in the IR
+ statepoint. Each *unique* pair will occur at least once; duplicates
+ are possible.
+
+Note that the Locations used in each section may describe the same
+physical location. e.g. A stack slot may appear as a deopt location,
+a gc base pointer, and a gc derived pointer.
+
+The ID field of the 'StkMapRecord' for a statepoint is meaningless and
+it's value is explicitly unspecified.
+
+The LiveOut section of the StkMapRecord will be empty for a statepoint
+record.
+
+Safepoint Semantics & Verification
+==================================
+
+The fundamental correctness property for the compiled code's
+correctness w.r.t. the garbage collector is a dynamic one. It must be
+the case that there is no dynamic trace such that a operation
+involving a potentially relocated pointer is observably-after a
+safepoint which could relocate it. 'observably-after' is this usage
+means that an outside observer could observe this sequence of events
+in a way which precludes the operation being performed before the
+safepoint.
+
+To understand why this 'observable-after' property is required,
+consider a null comparison performed on the original copy of a
+relocated pointer. Assuming that control flow follows the safepoint,
+there is no way to observe externally whether the null comparison is
+performed before or after the safepoint. (Remember, the original
+Value is unmodified by the safepoint.) The compiler is free to make
+either scheduling choice.
+
+The actual correctness property implemented is slightly stronger than
+this. We require that there be no *static path* on which a
+potentially relocated pointer is 'observably-after' it may have been
+relocated. This is slightly stronger than is strictly necessary (and
+thus may disallow some otherwise valid programs), but greatly
+simplifies reasoning about correctness of the compiled code.
+
+By construction, this property will be upheld by the optimizer if
+correctly established in the source IR. This is a key invariant of
+the design.
+
+The existing IR Verifier pass has been extended to check most of the
+local restrictions on the intrinsics mentioned in their respective
+documentation. The current implementation in LLVM does not check the
+key relocation invariant, but this is ongoing work on developing such
+a verifier. Please ask on llvmdev if you're interested in
+experimenting with the current version.
+
+Bugs and Enhancements
+=====================
+
+Currently known bugs and enhancements under consideration can be
+tracked by performing a `bugzilla search
+<http://llvm.org/bugs/buglist.cgi?cmdtype=runnamed&namedcmd=Statepoint%20Bugs&list_id=64342>`_
+for [Statepoint] in the summary field. When filing new bugs, please
+use this tag so that interested parties see the newly filed bug. As
+with most LLVM features, design discussions take place on `llvmdev
+<http://lists.cs.uiuc.edu/mailman/listinfo/llvmdev>`_, and patches
+should be sent to `llvm-commits
+<http://lists.cs.uiuc.edu/mailman/listinfo/llvm-commits>`_ for review.
+
Added: www-releases/trunk/3.6.1/docs/_sources/SystemLibrary.txt
URL: http://llvm.org/viewvc/llvm-project/www-releases/trunk/3.6.1/docs/_sources/SystemLibrary.txt?rev=238135&view=auto
==============================================================================
--- www-releases/trunk/3.6.1/docs/_sources/SystemLibrary.txt (added)
+++ www-releases/trunk/3.6.1/docs/_sources/SystemLibrary.txt Mon May 25 08:53:02 2015
@@ -0,0 +1,247 @@
+==============
+System Library
+==============
+
+Abstract
+========
+
+This document provides some details on LLVM's System Library, located in the
+source at ``lib/System`` and ``include/llvm/System``. The library's purpose is
+to shield LLVM from the differences between operating systems for the few
+services LLVM needs from the operating system. Much of LLVM is written using
+portability features of standard C++. However, in a few areas, system dependent
+facilities are needed and the System Library is the wrapper around those system
+calls.
+
+By centralizing LLVM's use of operating system interfaces, we make it possible
+for the LLVM tool chain and runtime libraries to be more easily ported to new
+platforms since (theoretically) only ``lib/System`` needs to be ported. This
+library also unclutters the rest of LLVM from #ifdef use and special cases for
+specific operating systems. Such uses are replaced with simple calls to the
+interfaces provided in ``include/llvm/System``.
+
+Note that the System Library is not intended to be a complete operating system
+wrapper (such as the Adaptive Communications Environment (ACE) or Apache
+Portable Runtime (APR)), but only provides the functionality necessary to
+support LLVM.
+
+The System Library was written by Reid Spencer who formulated the design based
+on similar work originating from the eXtensible Programming System (XPS).
+Several people helped with the effort; especially, Jeff Cohen and Henrik Bach
+on the Win32 port.
+
+Keeping LLVM Portable
+=====================
+
+In order to keep LLVM portable, LLVM developers should adhere to a set of
+portability rules associated with the System Library. Adherence to these rules
+should help the System Library achieve its goal of shielding LLVM from the
+variations in operating system interfaces and doing so efficiently. The
+following sections define the rules needed to fulfill this objective.
+
+Don't Include System Headers
+----------------------------
+
+Except in ``lib/System``, no LLVM source code should directly ``#include`` a
+system header. Care has been taken to remove all such ``#includes`` from LLVM
+while ``lib/System`` was being developed. Specifically this means that header
+files like "``unistd.h``", "``windows.h``", "``stdio.h``", and "``string.h``"
+are forbidden to be included by LLVM source code outside the implementation of
+``lib/System``.
+
+To obtain system-dependent functionality, existing interfaces to the system
+found in ``include/llvm/System`` should be used. If an appropriate interface is
+not available, it should be added to ``include/llvm/System`` and implemented in
+``lib/System`` for all supported platforms.
+
+Don't Expose System Headers
+---------------------------
+
+The System Library must shield LLVM from **all** system headers. To obtain
+system level functionality, LLVM source must ``#include "llvm/System/Thing.h"``
+and nothing else. This means that ``Thing.h`` cannot expose any system header
+files. This protects LLVM from accidentally using system specific functionality
+and only allows it via the ``lib/System`` interface.
+
+Use Standard C Headers
+----------------------
+
+The **standard** C headers (the ones beginning with "c") are allowed to be
+exposed through the ``lib/System`` interface. These headers and the things they
+declare are considered to be platform agnostic. LLVM source files may include
+them directly or obtain their inclusion through ``lib/System`` interfaces.
+
+Use Standard C++ Headers
+------------------------
+
+The **standard** C++ headers from the standard C++ library and standard
+template library may be exposed through the ``lib/System`` interface. These
+headers and the things they declare are considered to be platform agnostic.
+LLVM source files may include them or obtain their inclusion through
+``lib/System`` interfaces.
+
+High Level Interface
+--------------------
+
+The entry points specified in the interface of ``lib/System`` must be aimed at
+completing some reasonably high level task needed by LLVM. We do not want to
+simply wrap each operating system call. It would be preferable to wrap several
+operating system calls that are always used in conjunction with one another by
+LLVM.
+
+For example, consider what is needed to execute a program, wait for it to
+complete, and return its result code. On Unix, this involves the following
+operating system calls: ``getenv``, ``fork``, ``execve``, and ``wait``. The
+correct thing for ``lib/System`` to provide is a function, say
+``ExecuteProgramAndWait``, that implements the functionality completely. what
+we don't want is wrappers for the operating system calls involved.
+
+There must **not** be a one-to-one relationship between operating system
+calls and the System library's interface. Any such interface function will be
+suspicious.
+
+No Unused Functionality
+-----------------------
+
+There must be no functionality specified in the interface of ``lib/System``
+that isn't actually used by LLVM. We're not writing a general purpose operating
+system wrapper here, just enough to satisfy LLVM's needs. And, LLVM doesn't
+need much. This design goal aims to keep the ``lib/System`` interface small and
+understandable which should foster its actual use and adoption.
+
+No Duplicate Implementations
+----------------------------
+
+The implementation of a function for a given platform must be written exactly
+once. This implies that it must be possible to apply a function's
+implementation to multiple operating systems if those operating systems can
+share the same implementation. This rule applies to the set of operating
+systems supported for a given class of operating system (e.g. Unix, Win32).
+
+No Virtual Methods
+------------------
+
+The System Library interfaces can be called quite frequently by LLVM. In order
+to make those calls as efficient as possible, we discourage the use of virtual
+methods. There is no need to use inheritance for implementation differences, it
+just adds complexity. The ``#include`` mechanism works just fine.
+
+No Exposed Functions
+--------------------
+
+Any functions defined by system libraries (i.e. not defined by ``lib/System``)
+must not be exposed through the ``lib/System`` interface, even if the header
+file for that function is not exposed. This prevents inadvertent use of system
+specific functionality.
+
+For example, the ``stat`` system call is notorious for having variations in the
+data it provides. ``lib/System`` must not declare ``stat`` nor allow it to be
+declared. Instead it should provide its own interface to discovering
+information about files and directories. Those interfaces may be implemented in
+terms of ``stat`` but that is strictly an implementation detail. The interface
+provided by the System Library must be implemented on all platforms (even those
+without ``stat``).
+
+No Exposed Data
+---------------
+
+Any data defined by system libraries (i.e. not defined by ``lib/System``) must
+not be exposed through the ``lib/System`` interface, even if the header file
+for that function is not exposed. As with functions, this prevents inadvertent
+use of data that might not exist on all platforms.
+
+Minimize Soft Errors
+--------------------
+
+Operating system interfaces will generally provide error results for every
+little thing that could go wrong. In almost all cases, you can divide these
+error results into two groups: normal/good/soft and abnormal/bad/hard. That is,
+some of the errors are simply information like "file not found", "insufficient
+privileges", etc. while other errors are much harder like "out of space", "bad
+disk sector", or "system call interrupted". We'll call the first group "*soft*"
+errors and the second group "*hard*" errors.
+
+``lib/System`` must always attempt to minimize soft errors. This is a design
+requirement because the minimization of soft errors can affect the granularity
+and the nature of the interface. In general, if you find that you're wanting to
+throw soft errors, you must review the granularity of the interface because it
+is likely you're trying to implement something that is too low level. The rule
+of thumb is to provide interface functions that **can't** fail, except when
+faced with hard errors.
+
+For a trivial example, suppose we wanted to add an "``OpenFileForWriting``"
+function. For many operating systems, if the file doesn't exist, attempting to
+open the file will produce an error. However, ``lib/System`` should not simply
+throw that error if it occurs because its a soft error. The problem is that the
+interface function, ``OpenFileForWriting`` is too low level. It should be
+``OpenOrCreateFileForWriting``. In the case of the soft "doesn't exist" error,
+this function would just create it and then open it for writing.
+
+This design principle needs to be maintained in ``lib/System`` because it
+avoids the propagation of soft error handling throughout the rest of LLVM.
+Hard errors will generally just cause a termination for an LLVM tool so don't
+be bashful about throwing them.
+
+Rules of thumb:
+
+#. Don't throw soft errors, only hard errors.
+
+#. If you're tempted to throw a soft error, re-think the interface.
+
+#. Handle internally the most common normal/good/soft error conditions
+ so the rest of LLVM doesn't have to.
+
+No throw Specifications
+-----------------------
+
+None of the ``lib/System`` interface functions may be declared with C++
+``throw()`` specifications on them. This requirement makes sure that the
+compiler does not insert additional exception handling code into the interface
+functions. This is a performance consideration: ``lib/System`` functions are at
+the bottom of many call chains and as such can be frequently called. We need
+them to be as efficient as possible. However, no routines in the system
+library should actually throw exceptions.
+
+Code Organization
+-----------------
+
+Implementations of the System Library interface are separated by their general
+class of operating system. Currently only Unix and Win32 classes are defined
+but more could be added for other operating system classifications. To
+distinguish which implementation to compile, the code in ``lib/System`` uses
+the ``LLVM_ON_UNIX`` and ``LLVM_ON_WIN32`` ``#defines`` provided via configure
+through the ``llvm/Config/config.h`` file. Each source file in ``lib/System``,
+after implementing the generic (operating system independent) functionality
+needs to include the correct implementation using a set of
+``#if defined(LLVM_ON_XYZ)`` directives. For example, if we had
+``lib/System/File.cpp``, we'd expect to see in that file:
+
+.. code-block:: c++
+
+ #if defined(LLVM_ON_UNIX)
+ #include "Unix/File.cpp"
+ #endif
+ #if defined(LLVM_ON_WIN32)
+ #include "Win32/File.cpp"
+ #endif
+
+The implementation in ``lib/System/Unix/File.cpp`` should handle all Unix
+variants. The implementation in ``lib/System/Win32/File.cpp`` should handle all
+Win32 variants. What this does is quickly differentiate the basic class of
+operating system that will provide the implementation. The specific details for
+a given platform must still be determined through the use of ``#ifdef``.
+
+Consistent Semantics
+--------------------
+
+The implementation of a ``lib/System`` interface can vary drastically between
+platforms. That's okay as long as the end result of the interface function is
+the same. For example, a function to create a directory is pretty straight
+forward on all operating system. System V IPC on the other hand isn't even
+supported on all platforms. Instead of "supporting" System V IPC,
+``lib/System`` should provide an interface to the basic concept of
+inter-process communications. The implementations might use System V IPC if
+that was available or named pipes, or whatever gets the job done effectively
+for a given operating system. In all cases, the interface and the
+implementation must be semantically consistent.
+
Added: www-releases/trunk/3.6.1/docs/_sources/TableGen/BackEnds.txt
URL: http://llvm.org/viewvc/llvm-project/www-releases/trunk/3.6.1/docs/_sources/TableGen/BackEnds.txt?rev=238135&view=auto
==============================================================================
--- www-releases/trunk/3.6.1/docs/_sources/TableGen/BackEnds.txt (added)
+++ www-releases/trunk/3.6.1/docs/_sources/TableGen/BackEnds.txt Mon May 25 08:53:02 2015
@@ -0,0 +1,427 @@
+=================
+TableGen BackEnds
+=================
+
+.. contents::
+ :local:
+
+Introduction
+============
+
+TableGen backends are at the core of TableGen's functionality. The source files
+provide the semantics to a generated (in memory) structure, but it's up to the
+backend to print this out in a way that is meaningful to the user (normally a
+C program including a file or a textual list of warnings, options and error
+messages).
+
+TableGen is used by both LLVM and Clang with very different goals. LLVM uses it
+as a way to automate the generation of massive amounts of information regarding
+instructions, schedules, cores and architecture features. Some backends generate
+output that is consumed by more than one source file, so they need to be created
+in a way that is easy to use pre-processor tricks. Some backends can also print
+C code structures, so that they can be directly included as-is.
+
+Clang, on the other hand, uses it mainly for diagnostic messages (errors,
+warnings, tips) and attributes, so more on the textual end of the scale.
+
+LLVM BackEnds
+=============
+
+.. warning::
+ This document is raw. Each section below needs three sub-sections: description
+ of its purpose with a list of users, output generated from generic input, and
+ finally why it needed a new backend (in case there's something similar).
+
+Overall, each backend will take the same TableGen file type and transform into
+similar output for different targets/uses. There is an implicit contract between
+the TableGen files, the back-ends and their users.
+
+For instance, a global contract is that each back-end produces macro-guarded
+sections. Based on whether the file is included by a header or a source file,
+or even in which context of each file the include is being used, you have
+todefine a macro just before including it, to get the right output:
+
+.. code-block:: c++
+
+ #define GET_REGINFO_TARGET_DESC
+ #include "ARMGenRegisterInfo.inc"
+
+And just part of the generated file would be included. This is useful if
+you need the same information in multiple formats (instantiation, initialization,
+getter/setter functions, etc) from the same source TableGen file without having
+to re-compile the TableGen file multiple times.
+
+Sometimes, multiple macros might be defined before the same include file to
+output multiple blocks:
+
+.. code-block:: c++
+
+ #define GET_REGISTER_MATCHER
+ #define GET_SUBTARGET_FEATURE_NAME
+ #define GET_MATCHER_IMPLEMENTATION
+ #include "ARMGenAsmMatcher.inc"
+
+The macros will be undef'd automatically as they're used, in the include file.
+
+On all LLVM back-ends, the ``llvm-tblgen`` binary will be executed on the root
+TableGen file ``<Target>.td``, which should include all others. This guarantees
+that all information needed is accessible, and that no duplication is needed
+in the TbleGen files.
+
+CodeEmitter
+-----------
+
+**Purpose**: CodeEmitterGen uses the descriptions of instructions and their fields to
+construct an automated code emitter: a function that, given a MachineInstr,
+returns the (currently, 32-bit unsigned) value of the instruction.
+
+**Output**: C++ code, implementing the target's CodeEmitter
+class by overriding the virtual functions as ``<Target>CodeEmitter::function()``.
+
+**Usage**: Used to include directly at the end of ``<Target>MCCodeEmitter.cpp``.
+
+RegisterInfo
+------------
+
+**Purpose**: This tablegen backend is responsible for emitting a description of a target
+register file for a code generator. It uses instances of the Register,
+RegisterAliases, and RegisterClass classes to gather this information.
+
+**Output**: C++ code with enums and structures representing the register mappings,
+properties, masks, etc.
+
+**Usage**: Both on ``<Target>BaseRegisterInfo`` and ``<Target>MCTargetDesc`` (headers
+and source files) with macros defining in which they are for declaration vs.
+initialization issues.
+
+InstrInfo
+---------
+
+**Purpose**: This tablegen backend is responsible for emitting a description of the target
+instruction set for the code generator. (what are the differences from CodeEmitter?)
+
+**Output**: C++ code with enums and structures representing the register mappings,
+properties, masks, etc.
+
+**Usage**: Both on ``<Target>BaseInstrInfo`` and ``<Target>MCTargetDesc`` (headers
+and source files) with macros defining in which they are for declaration vs.
+
+AsmWriter
+---------
+
+**Purpose**: Emits an assembly printer for the current target.
+
+**Output**: Implementation of ``<Target>InstPrinter::printInstruction()``, among
+other things.
+
+**Usage**: Included directly into ``InstPrinter/<Target>InstPrinter.cpp``.
+
+AsmMatcher
+----------
+
+**Purpose**: Emits a target specifier matcher for
+converting parsed assembly operands in the MCInst structures. It also
+emits a matcher for custom operand parsing. Extensive documentation is
+written on the ``AsmMatcherEmitter.cpp`` file.
+
+**Output**: Assembler parsers' matcher functions, declarations, etc.
+
+**Usage**: Used in back-ends' ``AsmParser/<Target>AsmParser.cpp`` for
+building the AsmParser class.
+
+Disassembler
+------------
+
+**Purpose**: Contains disassembler table emitters for various
+architectures. Extensive documentation is written on the
+``DisassemblerEmitter.cpp`` file.
+
+**Output**: Decoding tables, static decoding functions, etc.
+
+**Usage**: Directly included in ``Disassembler/<Target>Disassembler.cpp``
+to cater for all default decodings, after all hand-made ones.
+
+PseudoLowering
+--------------
+
+**Purpose**: Generate pseudo instruction lowering.
+
+**Output**: Implements ``ARMAsmPrinter::emitPseudoExpansionLowering()``.
+
+**Usage**: Included directly into ``<Target>AsmPrinter.cpp``.
+
+CallingConv
+-----------
+
+**Purpose**: Responsible for emitting descriptions of the calling
+conventions supported by this target.
+
+**Output**: Implement static functions to deal with calling conventions
+chained by matching styles, returning false on no match.
+
+**Usage**: Used in ISelLowering and FastIsel as function pointers to
+implementation returned by a CC sellection function.
+
+DAGISel
+-------
+
+**Purpose**: Generate a DAG instruction selector.
+
+**Output**: Creates huge functions for automating DAG selection.
+
+**Usage**: Included in ``<Target>ISelDAGToDAG.cpp`` inside the target's
+implementation of ``SelectionDAGISel``.
+
+DFAPacketizer
+-------------
+
+**Purpose**: This class parses the Schedule.td file and produces an API that
+can be used to reason about whether an instruction can be added to a packet
+on a VLIW architecture. The class internally generates a deterministic finite
+automaton (DFA) that models all possible mappings of machine instructions
+to functional units as instructions are added to a packet.
+
+**Output**: Scheduling tables for GPU back-ends (Hexagon, AMD).
+
+**Usage**: Included directly on ``<Target>InstrInfo.cpp``.
+
+FastISel
+--------
+
+**Purpose**: This tablegen backend emits code for use by the "fast"
+instruction selection algorithm. See the comments at the top of
+lib/CodeGen/SelectionDAG/FastISel.cpp for background. This file
+scans through the target's tablegen instruction-info files
+and extracts instructions with obvious-looking patterns, and it emits
+code to look up these instructions by type and operator.
+
+**Output**: Generates ``Predicate`` and ``FastEmit`` methods.
+
+**Usage**: Implements private methods of the targets' implementation
+of ``FastISel`` class.
+
+Subtarget
+---------
+
+**Purpose**: Generate subtarget enumerations.
+
+**Output**: Enums, globals, local tables for sub-target information.
+
+**Usage**: Populates ``<Target>Subtarget`` and
+``MCTargetDesc/<Target>MCTargetDesc`` files (both headers and source).
+
+Intrinsic
+---------
+
+**Purpose**: Generate (target) intrinsic information.
+
+OptParserDefs
+-------------
+
+**Purpose**: Print enum values for a class.
+
+CTags
+-----
+
+**Purpose**: This tablegen backend emits an index of definitions in ctags(1)
+format. A helper script, utils/TableGen/tdtags, provides an easier-to-use
+interface; run 'tdtags -H' for documentation.
+
+Clang BackEnds
+==============
+
+ClangAttrClasses
+----------------
+
+**Purpose**: Creates Attrs.inc, which contains semantic attribute class
+declarations for any attribute in ``Attr.td`` that has not set ``ASTNode = 0``.
+This file is included as part of ``Attr.h``.
+
+ClangAttrParserStringSwitches
+-----------------------------
+
+**Purpose**: Creates AttrParserStringSwitches.inc, which contains
+StringSwitch::Case statements for parser-related string switches. Each switch
+is given its own macro (such as ``CLANG_ATTR_ARG_CONTEXT_LIST``, or
+``CLANG_ATTR_IDENTIFIER_ARG_LIST``), which is expected to be defined before
+including AttrParserStringSwitches.inc, and undefined after.
+
+ClangAttrImpl
+-------------
+
+**Purpose**: Creates AttrImpl.inc, which contains semantic attribute class
+definitions for any attribute in ``Attr.td`` that has not set ``ASTNode = 0``.
+This file is included as part of ``AttrImpl.cpp``.
+
+ClangAttrList
+-------------
+
+**Purpose**: Creates AttrList.inc, which is used when a list of semantic
+attribute identifiers is required. For instance, ``AttrKinds.h`` includes this
+file to generate the list of ``attr::Kind`` enumeration values. This list is
+separated out into multiple categories: attributes, inheritable attributes, and
+inheritable parameter attributes. This categorization happens automatically
+based on information in ``Attr.td`` and is used to implement the ``classof``
+functionality required for ``dyn_cast`` and similar APIs.
+
+ClangAttrPCHRead
+----------------
+
+**Purpose**: Creates AttrPCHRead.inc, which is used to deserialize attributes
+in the ``ASTReader::ReadAttributes`` function.
+
+ClangAttrPCHWrite
+-----------------
+
+**Purpose**: Creates AttrPCHWrite.inc, which is used to serialize attributes in
+the ``ASTWriter::WriteAttributes`` function.
+
+ClangAttrSpellings
+---------------------
+
+**Purpose**: Creates AttrSpellings.inc, which is used to implement the
+``__has_attribute`` feature test macro.
+
+ClangAttrSpellingListIndex
+--------------------------
+
+**Purpose**: Creates AttrSpellingListIndex.inc, which is used to map parsed
+attribute spellings (including which syntax or scope was used) to an attribute
+spelling list index. These spelling list index values are internal
+implementation details exposed via
+``AttributeList::getAttributeSpellingListIndex``.
+
+ClangAttrVisitor
+-------------------
+
+**Purpose**: Creates AttrVisitor.inc, which is used when implementing
+recursive AST visitors.
+
+ClangAttrTemplateInstantiate
+----------------------------
+
+**Purpose**: Creates AttrTemplateInstantiate.inc, which implements the
+``instantiateTemplateAttribute`` function, used when instantiating a template
+that requires an attribute to be cloned.
+
+ClangAttrParsedAttrList
+-----------------------
+
+**Purpose**: Creates AttrParsedAttrList.inc, which is used to generate the
+``AttributeList::Kind`` parsed attribute enumeration.
+
+ClangAttrParsedAttrImpl
+-----------------------
+
+**Purpose**: Creates AttrParsedAttrImpl.inc, which is used by
+``AttributeList.cpp`` to implement several functions on the ``AttributeList``
+class. This functionality is implemented via the ``AttrInfoMap ParsedAttrInfo``
+array, which contains one element per parsed attribute object.
+
+ClangAttrParsedAttrKinds
+------------------------
+
+**Purpose**: Creates AttrParsedAttrKinds.inc, which is used to implement the
+``AttributeList::getKind`` function, mapping a string (and syntax) to a parsed
+attribute ``AttributeList::Kind`` enumeration.
+
+ClangAttrDump
+-------------
+
+**Purpose**: Creates AttrDump.inc, which dumps information about an attribute.
+It is used to implement ``ASTDumper::dumpAttr``.
+
+ClangDiagsDefs
+--------------
+
+Generate Clang diagnostics definitions.
+
+ClangDiagGroups
+---------------
+
+Generate Clang diagnostic groups.
+
+ClangDiagsIndexName
+-------------------
+
+Generate Clang diagnostic name index.
+
+ClangCommentNodes
+-----------------
+
+Generate Clang AST comment nodes.
+
+ClangDeclNodes
+--------------
+
+Generate Clang AST declaration nodes.
+
+ClangStmtNodes
+--------------
+
+Generate Clang AST statement nodes.
+
+ClangSACheckers
+---------------
+
+Generate Clang Static Analyzer checkers.
+
+ClangCommentHTMLTags
+--------------------
+
+Generate efficient matchers for HTML tag names that are used in documentation comments.
+
+ClangCommentHTMLTagsProperties
+------------------------------
+
+Generate efficient matchers for HTML tag properties.
+
+ClangCommentHTMLNamedCharacterReferences
+----------------------------------------
+
+Generate function to translate named character references to UTF-8 sequences.
+
+ClangCommentCommandInfo
+-----------------------
+
+Generate command properties for commands that are used in documentation comments.
+
+ClangCommentCommandList
+-----------------------
+
+Generate list of commands that are used in documentation comments.
+
+ArmNeon
+-------
+
+Generate arm_neon.h for clang.
+
+ArmNeonSema
+-----------
+
+Generate ARM NEON sema support for clang.
+
+ArmNeonTest
+-----------
+
+Generate ARM NEON tests for clang.
+
+AttrDocs
+--------
+
+**Purpose**: Creates ``AttributeReference.rst`` from ``AttrDocs.td``, and is
+used for documenting user-facing attributes.
+
+How to write a back-end
+=======================
+
+TODO.
+
+Until we get a step-by-step HowTo for writing TableGen backends, you can at
+least grab the boilerplate (build system, new files, etc.) from Clang's
+r173931.
+
+TODO: How they work, how to write one. This section should not contain details
+about any particular backend, except maybe ``-print-enums`` as an example. This
+should highlight the APIs in ``TableGen/Record.h``.
+
Added: www-releases/trunk/3.6.1/docs/_sources/TableGen/Deficiencies.txt
URL: http://llvm.org/viewvc/llvm-project/www-releases/trunk/3.6.1/docs/_sources/TableGen/Deficiencies.txt?rev=238135&view=auto
==============================================================================
--- www-releases/trunk/3.6.1/docs/_sources/TableGen/Deficiencies.txt (added)
+++ www-releases/trunk/3.6.1/docs/_sources/TableGen/Deficiencies.txt Mon May 25 08:53:02 2015
@@ -0,0 +1,31 @@
+=====================
+TableGen Deficiencies
+=====================
+
+.. contents::
+ :local:
+
+Introduction
+============
+
+Despite being very generic, TableGen has some deficiencies that have been
+pointed out numerous times. The common theme is that, while TableGen allows
+you to build Domain-Specific-Languages, the final languages that you create
+lack the power of other DSLs, which in turn increase considerably the size
+and complexity of TableGen files.
+
+At the same time, TableGen allows you to create virtually any meaning of
+the basic concepts via custom-made back-ends, which can pervert the original
+design and make it very hard for newcomers to understand it.
+
+There are some in favour of extending the semantics even more, but making sure
+back-ends adhere to strict rules. Others suggesting we should move to more
+powerful DSLs designed with specific purposes, or even re-using existing
+DSLs.
+
+Known Problems
+==============
+
+TODO: Add here frequently asked questions about why TableGen doesn't do
+what you want, how it might, and how we could extend/restrict it to
+be more use friendly.
Added: www-releases/trunk/3.6.1/docs/_sources/TableGen/LangIntro.txt
URL: http://llvm.org/viewvc/llvm-project/www-releases/trunk/3.6.1/docs/_sources/TableGen/LangIntro.txt?rev=238135&view=auto
==============================================================================
--- www-releases/trunk/3.6.1/docs/_sources/TableGen/LangIntro.txt (added)
+++ www-releases/trunk/3.6.1/docs/_sources/TableGen/LangIntro.txt Mon May 25 08:53:02 2015
@@ -0,0 +1,615 @@
+==============================
+TableGen Language Introduction
+==============================
+
+.. contents::
+ :local:
+
+.. warning::
+ This document is extremely rough. If you find something lacking, please
+ fix it, file a documentation bug, or ask about it on llvmdev.
+
+Introduction
+============
+
+This document is not meant to be a normative spec about the TableGen language
+in and of itself (i.e. how to understand a given construct in terms of how
+it affects the final set of records represented by the TableGen file). For
+the formal language specification, see :doc:`LangRef`.
+
+TableGen syntax
+===============
+
+TableGen doesn't care about the meaning of data (that is up to the backend to
+define), but it does care about syntax, and it enforces a simple type system.
+This section describes the syntax and the constructs allowed in a TableGen file.
+
+TableGen primitives
+-------------------
+
+TableGen comments
+^^^^^^^^^^^^^^^^^
+
+TableGen supports C++ style "``//``" comments, which run to the end of the
+line, and it also supports **nestable** "``/* */``" comments.
+
+.. _TableGen type:
+
+The TableGen type system
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+TableGen files are strongly typed, in a simple (but complete) type-system.
+These types are used to perform automatic conversions, check for errors, and to
+help interface designers constrain the input that they allow. Every `value
+definition`_ is required to have an associated type.
+
+TableGen supports a mixture of very low-level types (such as ``bit``) and very
+high-level types (such as ``dag``). This flexibility is what allows it to
+describe a wide range of information conveniently and compactly. The TableGen
+types are:
+
+``bit``
+ A 'bit' is a boolean value that can hold either 0 or 1.
+
+``int``
+ The 'int' type represents a simple 32-bit integer value, such as 5.
+
+``string``
+ The 'string' type represents an ordered sequence of characters of arbitrary
+ length.
+
+``bits<n>``
+ A 'bits' type is an arbitrary, but fixed, size integer that is broken up
+ into individual bits. This type is useful because it can handle some bits
+ being defined while others are undefined.
+
+``list<ty>``
+ This type represents a list whose elements are some other type. The
+ contained type is arbitrary: it can even be another list type.
+
+Class type
+ Specifying a class name in a type context means that the defined value must
+ be a subclass of the specified class. This is useful in conjunction with
+ the ``list`` type, for example, to constrain the elements of the list to a
+ common base class (e.g., a ``list<Register>`` can only contain definitions
+ derived from the "``Register``" class).
+
+``dag``
+ This type represents a nestable directed graph of elements.
+
+To date, these types have been sufficient for describing things that TableGen
+has been used for, but it is straight-forward to extend this list if needed.
+
+.. _TableGen expressions:
+
+TableGen values and expressions
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+TableGen allows for a pretty reasonable number of different expression forms
+when building up values. These forms allow the TableGen file to be written in a
+natural syntax and flavor for the application. The current expression forms
+supported include:
+
+``?``
+ uninitialized field
+
+``0b1001011``
+ binary integer value.
+ Note that this is sized by the number of bits given and will not be
+ silently extended/truncated.
+
+``07654321``
+ octal integer value (indicated by a leading 0)
+
+``7``
+ decimal integer value
+
+``0x7F``
+ hexadecimal integer value
+
+``"foo"``
+ string value
+
+``[{ ... }]``
+ usually called a "code fragment", but is just a multiline string literal
+
+``[ X, Y, Z ]<type>``
+ list value. <type> is the type of the list element and is usually optional.
+ In rare cases, TableGen is unable to deduce the element type in which case
+ the user must specify it explicitly.
+
+``{ a, b, 0b10 }``
+ initializer for a "bits<4>" value.
+ 1-bit from "a", 1-bit from "b", 2-bits from 0b10.
+
+``value``
+ value reference
+
+``value{17}``
+ access to one bit of a value
+
+``value{15-17}``
+ access to multiple bits of a value
+
+``DEF``
+ reference to a record definition
+
+``CLASS<val list>``
+ reference to a new anonymous definition of CLASS with the specified template
+ arguments.
+
+``X.Y``
+ reference to the subfield of a value
+
+``list[4-7,17,2-3]``
+ A slice of the 'list' list, including elements 4,5,6,7,17,2, and 3 from it.
+ Elements may be included multiple times.
+
+``foreach <var> = [ <list> ] in { <body> }``
+
+``foreach <var> = [ <list> ] in <def>``
+ Replicate <body> or <def>, replacing instances of <var> with each value
+ in <list>. <var> is scoped at the level of the ``foreach`` loop and must
+ not conflict with any other object introduced in <body> or <def>. Currently
+ only ``def``\s are expanded within <body>.
+
+``foreach <var> = 0-15 in ...``
+
+``foreach <var> = {0-15,32-47} in ...``
+ Loop over ranges of integers. The braces are required for multiple ranges.
+
+``(DEF a, b)``
+ a dag value. The first element is required to be a record definition, the
+ remaining elements in the list may be arbitrary other values, including
+ nested ```dag``' values.
+
+``!listconcat(a, b, ...)``
+ A list value that is the result of concatenating the 'a' and 'b' lists.
+ The lists must have the same element type.
+ More than two arguments are accepted with the result being the concatenation
+ of all the lists given.
+
+``!strconcat(a, b, ...)``
+ A string value that is the result of concatenating the 'a' and 'b' strings.
+ More than two arguments are accepted with the result being the concatenation
+ of all the strings given.
+
+``str1#str2``
+ "#" (paste) is a shorthand for !strconcat. It may concatenate things that
+ are not quoted strings, in which case an implicit !cast<string> is done on
+ the operand of the paste.
+
+``!cast<type>(a)``
+ A symbol of type *type* obtained by looking up the string 'a' in the symbol
+ table. If the type of 'a' does not match *type*, TableGen aborts with an
+ error. !cast<string> is a special case in that the argument must be an
+ object defined by a 'def' construct.
+
+``!subst(a, b, c)``
+ If 'a' and 'b' are of string type or are symbol references, substitute 'b'
+ for 'a' in 'c.' This operation is analogous to $(subst) in GNU make.
+
+``!foreach(a, b, c)``
+ For each member 'b' of dag or list 'a' apply operator 'c.' 'b' is a dummy
+ variable that should be declared as a member variable of an instantiated
+ class. This operation is analogous to $(foreach) in GNU make.
+
+``!head(a)``
+ The first element of list 'a.'
+
+``!tail(a)``
+ The 2nd-N elements of list 'a.'
+
+``!empty(a)``
+ An integer {0,1} indicating whether list 'a' is empty.
+
+``!if(a,b,c)``
+ 'b' if the result of 'int' or 'bit' operator 'a' is nonzero, 'c' otherwise.
+
+``!eq(a,b)``
+ 'bit 1' if string a is equal to string b, 0 otherwise. This only operates
+ on string, int and bit objects. Use !cast<string> to compare other types of
+ objects.
+
+``!shl(a,b)`` ``!srl(a,b)`` ``!sra(a,b)`` ``!add(a,b)`` ``!and(a,b)``
+ The usual binary and arithmetic operators.
+
+Note that all of the values have rules specifying how they convert to values
+for different types. These rules allow you to assign a value like "``7``"
+to a "``bits<4>``" value, for example.
+
+Classes and definitions
+-----------------------
+
+As mentioned in the :doc:`introduction <index>`, classes and definitions (collectively known as
+'records') in TableGen are the main high-level unit of information that TableGen
+collects. Records are defined with a ``def`` or ``class`` keyword, the record
+name, and an optional list of "`template arguments`_". If the record has
+superclasses, they are specified as a comma separated list that starts with a
+colon character ("``:``"). If `value definitions`_ or `let expressions`_ are
+needed for the class, they are enclosed in curly braces ("``{}``"); otherwise,
+the record ends with a semicolon.
+
+Here is a simple TableGen file:
+
+.. code-block:: llvm
+
+ class C { bit V = 1; }
+ def X : C;
+ def Y : C {
+ string Greeting = "hello";
+ }
+
+This example defines two definitions, ``X`` and ``Y``, both of which derive from
+the ``C`` class. Because of this, they both get the ``V`` bit value. The ``Y``
+definition also gets the Greeting member as well.
+
+In general, classes are useful for collecting together the commonality between a
+group of records and isolating it in a single place. Also, classes permit the
+specification of default values for their subclasses, allowing the subclasses to
+override them as they wish.
+
+.. _value definition:
+.. _value definitions:
+
+Value definitions
+^^^^^^^^^^^^^^^^^
+
+Value definitions define named entries in records. A value must be defined
+before it can be referred to as the operand for another value definition or
+before the value is reset with a `let expression`_. A value is defined by
+specifying a `TableGen type`_ and a name. If an initial value is available, it
+may be specified after the type with an equal sign. Value definitions require
+terminating semicolons.
+
+.. _let expression:
+.. _let expressions:
+.. _"let" expressions within a record:
+
+'let' expressions
+^^^^^^^^^^^^^^^^^
+
+A record-level let expression is used to change the value of a value definition
+in a record. This is primarily useful when a superclass defines a value that a
+derived class or definition wants to override. Let expressions consist of the
+'``let``' keyword followed by a value name, an equal sign ("``=``"), and a new
+value. For example, a new class could be added to the example above, redefining
+the ``V`` field for all of its subclasses:
+
+.. code-block:: llvm
+
+ class D : C { let V = 0; }
+ def Z : D;
+
+In this case, the ``Z`` definition will have a zero value for its ``V`` value,
+despite the fact that it derives (indirectly) from the ``C`` class, because the
+``D`` class overrode its value.
+
+.. _template arguments:
+
+Class template arguments
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+TableGen permits the definition of parameterized classes as well as normal
+concrete classes. Parameterized TableGen classes specify a list of variable
+bindings (which may optionally have defaults) that are bound when used. Here is
+a simple example:
+
+.. code-block:: llvm
+
+ class FPFormat<bits<3> val> {
+ bits<3> Value = val;
+ }
+ def NotFP : FPFormat<0>;
+ def ZeroArgFP : FPFormat<1>;
+ def OneArgFP : FPFormat<2>;
+ def OneArgFPRW : FPFormat<3>;
+ def TwoArgFP : FPFormat<4>;
+ def CompareFP : FPFormat<5>;
+ def CondMovFP : FPFormat<6>;
+ def SpecialFP : FPFormat<7>;
+
+In this case, template arguments are used as a space efficient way to specify a
+list of "enumeration values", each with a "``Value``" field set to the specified
+integer.
+
+The more esoteric forms of `TableGen expressions`_ are useful in conjunction
+with template arguments. As an example:
+
+.. code-block:: llvm
+
+ class ModRefVal<bits<2> val> {
+ bits<2> Value = val;
+ }
+
+ def None : ModRefVal<0>;
+ def Mod : ModRefVal<1>;
+ def Ref : ModRefVal<2>;
+ def ModRef : ModRefVal<3>;
+
+ class Value<ModRefVal MR> {
+ // Decode some information into a more convenient format, while providing
+ // a nice interface to the user of the "Value" class.
+ bit isMod = MR.Value{0};
+ bit isRef = MR.Value{1};
+
+ // other stuff...
+ }
+
+ // Example uses
+ def bork : Value<Mod>;
+ def zork : Value<Ref>;
+ def hork : Value<ModRef>;
+
+This is obviously a contrived example, but it shows how template arguments can
+be used to decouple the interface provided to the user of the class from the
+actual internal data representation expected by the class. In this case,
+running ``llvm-tblgen`` on the example prints the following definitions:
+
+.. code-block:: llvm
+
+ def bork { // Value
+ bit isMod = 1;
+ bit isRef = 0;
+ }
+ def hork { // Value
+ bit isMod = 1;
+ bit isRef = 1;
+ }
+ def zork { // Value
+ bit isMod = 0;
+ bit isRef = 1;
+ }
+
+This shows that TableGen was able to dig into the argument and extract a piece
+of information that was requested by the designer of the "Value" class. For
+more realistic examples, please see existing users of TableGen, such as the X86
+backend.
+
+Multiclass definitions and instances
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+While classes with template arguments are a good way to factor commonality
+between two instances of a definition, multiclasses allow a convenient notation
+for defining multiple definitions at once (instances of implicitly constructed
+classes). For example, consider an 3-address instruction set whose instructions
+come in two forms: "``reg = reg op reg``" and "``reg = reg op imm``"
+(e.g. SPARC). In this case, you'd like to specify in one place that this
+commonality exists, then in a separate place indicate what all the ops are.
+
+Here is an example TableGen fragment that shows this idea:
+
+.. code-block:: llvm
+
+ def ops;
+ def GPR;
+ def Imm;
+ class inst<int opc, string asmstr, dag operandlist>;
+
+ multiclass ri_inst<int opc, string asmstr> {
+ def _rr : inst<opc, !strconcat(asmstr, " $dst, $src1, $src2"),
+ (ops GPR:$dst, GPR:$src1, GPR:$src2)>;
+ def _ri : inst<opc, !strconcat(asmstr, " $dst, $src1, $src2"),
+ (ops GPR:$dst, GPR:$src1, Imm:$src2)>;
+ }
+
+ // Instantiations of the ri_inst multiclass.
+ defm ADD : ri_inst<0b111, "add">;
+ defm SUB : ri_inst<0b101, "sub">;
+ defm MUL : ri_inst<0b100, "mul">;
+ ...
+
+The name of the resultant definitions has the multidef fragment names appended
+to them, so this defines ``ADD_rr``, ``ADD_ri``, ``SUB_rr``, etc. A defm may
+inherit from multiple multiclasses, instantiating definitions from each
+multiclass. Using a multiclass this way is exactly equivalent to instantiating
+the classes multiple times yourself, e.g. by writing:
+
+.. code-block:: llvm
+
+ def ops;
+ def GPR;
+ def Imm;
+ class inst<int opc, string asmstr, dag operandlist>;
+
+ class rrinst<int opc, string asmstr>
+ : inst<opc, !strconcat(asmstr, " $dst, $src1, $src2"),
+ (ops GPR:$dst, GPR:$src1, GPR:$src2)>;
+
+ class riinst<int opc, string asmstr>
+ : inst<opc, !strconcat(asmstr, " $dst, $src1, $src2"),
+ (ops GPR:$dst, GPR:$src1, Imm:$src2)>;
+
+ // Instantiations of the ri_inst multiclass.
+ def ADD_rr : rrinst<0b111, "add">;
+ def ADD_ri : riinst<0b111, "add">;
+ def SUB_rr : rrinst<0b101, "sub">;
+ def SUB_ri : riinst<0b101, "sub">;
+ def MUL_rr : rrinst<0b100, "mul">;
+ def MUL_ri : riinst<0b100, "mul">;
+ ...
+
+A ``defm`` can also be used inside a multiclass providing several levels of
+multiclass instantiations.
+
+.. code-block:: llvm
+
+ class Instruction<bits<4> opc, string Name> {
+ bits<4> opcode = opc;
+ string name = Name;
+ }
+
+ multiclass basic_r<bits<4> opc> {
+ def rr : Instruction<opc, "rr">;
+ def rm : Instruction<opc, "rm">;
+ }
+
+ multiclass basic_s<bits<4> opc> {
+ defm SS : basic_r<opc>;
+ defm SD : basic_r<opc>;
+ def X : Instruction<opc, "x">;
+ }
+
+ multiclass basic_p<bits<4> opc> {
+ defm PS : basic_r<opc>;
+ defm PD : basic_r<opc>;
+ def Y : Instruction<opc, "y">;
+ }
+
+ defm ADD : basic_s<0xf>, basic_p<0xf>;
+ ...
+
+ // Results
+ def ADDPDrm { ...
+ def ADDPDrr { ...
+ def ADDPSrm { ...
+ def ADDPSrr { ...
+ def ADDSDrm { ...
+ def ADDSDrr { ...
+ def ADDY { ...
+ def ADDX { ...
+
+``defm`` declarations can inherit from classes too, the rule to follow is that
+the class list must start after the last multiclass, and there must be at least
+one multiclass before them.
+
+.. code-block:: llvm
+
+ class XD { bits<4> Prefix = 11; }
+ class XS { bits<4> Prefix = 12; }
+
+ class I<bits<4> op> {
+ bits<4> opcode = op;
+ }
+
+ multiclass R {
+ def rr : I<4>;
+ def rm : I<2>;
+ }
+
+ multiclass Y {
+ defm SS : R, XD;
+ defm SD : R, XS;
+ }
+
+ defm Instr : Y;
+
+ // Results
+ def InstrSDrm {
+ bits<4> opcode = { 0, 0, 1, 0 };
+ bits<4> Prefix = { 1, 1, 0, 0 };
+ }
+ ...
+ def InstrSSrr {
+ bits<4> opcode = { 0, 1, 0, 0 };
+ bits<4> Prefix = { 1, 0, 1, 1 };
+ }
+
+File scope entities
+-------------------
+
+File inclusion
+^^^^^^^^^^^^^^
+
+TableGen supports the '``include``' token, which textually substitutes the
+specified file in place of the include directive. The filename should be
+specified as a double quoted string immediately after the '``include``' keyword.
+Example:
+
+.. code-block:: llvm
+
+ include "foo.td"
+
+'let' expressions
+^^^^^^^^^^^^^^^^^
+
+"Let" expressions at file scope are similar to `"let" expressions within a
+record`_, except they can specify a value binding for multiple records at a
+time, and may be useful in certain other cases. File-scope let expressions are
+really just another way that TableGen allows the end-user to factor out
+commonality from the records.
+
+File-scope "let" expressions take a comma-separated list of bindings to apply,
+and one or more records to bind the values in. Here are some examples:
+
+.. code-block:: llvm
+
+ let isTerminator = 1, isReturn = 1, isBarrier = 1, hasCtrlDep = 1 in
+ def RET : I<0xC3, RawFrm, (outs), (ins), "ret", [(X86retflag 0)]>;
+
+ let isCall = 1 in
+ // All calls clobber the non-callee saved registers...
+ let Defs = [EAX, ECX, EDX, FP0, FP1, FP2, FP3, FP4, FP5, FP6, ST0,
+ MM0, MM1, MM2, MM3, MM4, MM5, MM6, MM7,
+ XMM0, XMM1, XMM2, XMM3, XMM4, XMM5, XMM6, XMM7, EFLAGS] in {
+ def CALLpcrel32 : Ii32<0xE8, RawFrm, (outs), (ins i32imm:$dst,variable_ops),
+ "call\t${dst:call}", []>;
+ def CALL32r : I<0xFF, MRM2r, (outs), (ins GR32:$dst, variable_ops),
+ "call\t{*}$dst", [(X86call GR32:$dst)]>;
+ def CALL32m : I<0xFF, MRM2m, (outs), (ins i32mem:$dst, variable_ops),
+ "call\t{*}$dst", []>;
+ }
+
+File-scope "let" expressions are often useful when a couple of definitions need
+to be added to several records, and the records do not otherwise need to be
+opened, as in the case with the ``CALL*`` instructions above.
+
+It's also possible to use "let" expressions inside multiclasses, providing more
+ways to factor out commonality from the records, specially if using several
+levels of multiclass instantiations. This also avoids the need of using "let"
+expressions within subsequent records inside a multiclass.
+
+.. code-block:: llvm
+
+ multiclass basic_r<bits<4> opc> {
+ let Predicates = [HasSSE2] in {
+ def rr : Instruction<opc, "rr">;
+ def rm : Instruction<opc, "rm">;
+ }
+ let Predicates = [HasSSE3] in
+ def rx : Instruction<opc, "rx">;
+ }
+
+ multiclass basic_ss<bits<4> opc> {
+ let IsDouble = 0 in
+ defm SS : basic_r<opc>;
+
+ let IsDouble = 1 in
+ defm SD : basic_r<opc>;
+ }
+
+ defm ADD : basic_ss<0xf>;
+
+Looping
+^^^^^^^
+
+TableGen supports the '``foreach``' block, which textually replicates the loop
+body, substituting iterator values for iterator references in the body.
+Example:
+
+.. code-block:: llvm
+
+ foreach i = [0, 1, 2, 3] in {
+ def R#i : Register<...>;
+ def F#i : Register<...>;
+ }
+
+This will create objects ``R0``, ``R1``, ``R2`` and ``R3``. ``foreach`` blocks
+may be nested. If there is only one item in the body the braces may be
+elided:
+
+.. code-block:: llvm
+
+ foreach i = [0, 1, 2, 3] in
+ def R#i : Register<...>;
+
+Code Generator backend info
+===========================
+
+Expressions used by code generator to describe instructions and isel patterns:
+
+``(implicit a)``
+ an implicitly defined physical register. This tells the dag instruction
+ selection emitter the input pattern's extra definitions matches implicit
+ physical register definitions.
+
Added: www-releases/trunk/3.6.1/docs/_sources/TableGen/LangRef.txt
URL: http://llvm.org/viewvc/llvm-project/www-releases/trunk/3.6.1/docs/_sources/TableGen/LangRef.txt?rev=238135&view=auto
==============================================================================
--- www-releases/trunk/3.6.1/docs/_sources/TableGen/LangRef.txt (added)
+++ www-releases/trunk/3.6.1/docs/_sources/TableGen/LangRef.txt Mon May 25 08:53:02 2015
@@ -0,0 +1,388 @@
+===========================
+TableGen Language Reference
+===========================
+
+.. contents::
+ :local:
+
+.. warning::
+ This document is extremely rough. If you find something lacking, please
+ fix it, file a documentation bug, or ask about it on llvmdev.
+
+Introduction
+============
+
+This document is meant to be a normative spec about the TableGen language
+in and of itself (i.e. how to understand a given construct in terms of how
+it affects the final set of records represented by the TableGen file). If
+you are unsure if this document is really what you are looking for, please
+read the :doc:`introduction to TableGen <index>` first.
+
+Notation
+========
+
+The lexical and syntax notation used here is intended to imitate
+`Python's`_. In particular, for lexical definitions, the productions
+operate at the character level and there is no implied whitespace between
+elements. The syntax definitions operate at the token level, so there is
+implied whitespace between tokens.
+
+.. _`Python's`: http://docs.python.org/py3k/reference/introduction.html#notation
+
+Lexical Analysis
+================
+
+TableGen supports BCPL (``// ...``) and nestable C-style (``/* ... */``)
+comments.
+
+The following is a listing of the basic punctuation tokens::
+
+ - + [ ] { } ( ) < > : ; . = ? #
+
+Numeric literals take one of the following forms:
+
+.. TableGen actually will lex some pretty strange sequences an interpret
+ them as numbers. What is shown here is an attempt to approximate what it
+ "should" accept.
+
+.. productionlist::
+ TokInteger: `DecimalInteger` | `HexInteger` | `BinInteger`
+ DecimalInteger: ["+" | "-"] ("0"..."9")+
+ HexInteger: "0x" ("0"..."9" | "a"..."f" | "A"..."F")+
+ BinInteger: "0b" ("0" | "1")+
+
+One aspect to note is that the :token:`DecimalInteger` token *includes* the
+``+`` or ``-``, as opposed to having ``+`` and ``-`` be unary operators as
+most languages do.
+
+Also note that :token:`BinInteger` creates a value of type ``bits<n>``
+(where ``n`` is the number of bits). This will implicitly convert to
+integers when needed.
+
+TableGen has identifier-like tokens:
+
+.. productionlist::
+ ualpha: "a"..."z" | "A"..."Z" | "_"
+ TokIdentifier: ("0"..."9")* `ualpha` (`ualpha` | "0"..."9")*
+ TokVarName: "$" `ualpha` (`ualpha` | "0"..."9")*
+
+Note that unlike most languages, TableGen allows :token:`TokIdentifier` to
+begin with a number. In case of ambiguity, a token will be interpreted as a
+numeric literal rather than an identifier.
+
+TableGen also has two string-like literals:
+
+.. productionlist::
+ TokString: '"' <non-'"' characters and C-like escapes> '"'
+ TokCodeFragment: "[{" <shortest text not containing "}]"> "}]"
+
+:token:`TokCodeFragment` is essentially a multiline string literal
+delimited by ``[{`` and ``}]``.
+
+.. note::
+ The current implementation accepts the following C-like escapes::
+
+ \\ \' \" \t \n
+
+TableGen also has the following keywords::
+
+ bit bits class code dag
+ def foreach defm field in
+ int let list multiclass string
+
+TableGen also has "bang operators" which have a
+wide variety of meanings:
+
+.. productionlist::
+ BangOperator: one of
+ :!eq !if !head !tail !con
+ :!add !shl !sra !srl !and
+ :!cast !empty !subst !foreach !listconcat !strconcat
+
+Syntax
+======
+
+TableGen has an ``include`` mechanism. It does not play a role in the
+syntax per se, since it is lexically replaced with the contents of the
+included file.
+
+.. productionlist::
+ IncludeDirective: "include" `TokString`
+
+TableGen's top-level production consists of "objects".
+
+.. productionlist::
+ TableGenFile: `Object`*
+ Object: `Class` | `Def` | `Defm` | `Let` | `MultiClass` | `Foreach`
+
+``class``\es
+------------
+
+.. productionlist::
+ Class: "class" `TokIdentifier` [`TemplateArgList`] `ObjectBody`
+
+A ``class`` declaration creates a record which other records can inherit
+from. A class can be parametrized by a list of "template arguments", whose
+values can be used in the class body.
+
+A given class can only be defined once. A ``class`` declaration is
+considered to define the class if any of the following is true:
+
+.. break ObjectBody into its consituents so that they are present here?
+
+#. The :token:`TemplateArgList` is present.
+#. The :token:`Body` in the :token:`ObjectBody` is present and is not empty.
+#. The :token:`BaseClassList` in the :token:`ObjectBody` is present.
+
+You can declare an empty class by giving and empty :token:`TemplateArgList`
+and an empty :token:`ObjectBody`. This can serve as a restricted form of
+forward declaration: note that records deriving from the forward-declared
+class will inherit no fields from it since the record expansion is done
+when the record is parsed.
+
+.. productionlist::
+ TemplateArgList: "<" `Declaration` ("," `Declaration`)* ">"
+
+Declarations
+------------
+
+.. Omitting mention of arcane "field" prefix to discourage its use.
+
+The declaration syntax is pretty much what you would expect as a C++
+programmer.
+
+.. productionlist::
+ Declaration: `Type` `TokIdentifier` ["=" `Value`]
+
+It assigns the value to the identifer.
+
+Types
+-----
+
+.. productionlist::
+ Type: "string" | "code" | "bit" | "int" | "dag"
+ :| "bits" "<" `TokInteger` ">"
+ :| "list" "<" `Type` ">"
+ :| `ClassID`
+ ClassID: `TokIdentifier`
+
+Both ``string`` and ``code`` correspond to the string type; the difference
+is purely to indicate programmer intention.
+
+The :token:`ClassID` must identify a class that has been previously
+declared or defined.
+
+Values
+------
+
+.. productionlist::
+ Value: `SimpleValue` `ValueSuffix`*
+ ValueSuffix: "{" `RangeList` "}"
+ :| "[" `RangeList` "]"
+ :| "." `TokIdentifier`
+ RangeList: `RangePiece` ("," `RangePiece`)*
+ RangePiece: `TokInteger`
+ :| `TokInteger` "-" `TokInteger`
+ :| `TokInteger` `TokInteger`
+
+The peculiar last form of :token:`RangePiece` is due to the fact that the
+"``-``" is included in the :token:`TokInteger`, hence ``1-5`` gets lexed as
+two consecutive :token:`TokInteger`'s, with values ``1`` and ``-5``,
+instead of "1", "-", and "5".
+The :token:`RangeList` can be thought of as specifying "list slice" in some
+contexts.
+
+
+:token:`SimpleValue` has a number of forms:
+
+
+.. productionlist::
+ SimpleValue: `TokIdentifier`
+
+The value will be the variable referenced by the identifier. It can be one
+of:
+
+.. The code for this is exceptionally abstruse. These examples are a
+ best-effort attempt.
+
+* name of a ``def``, such as the use of ``Bar`` in::
+
+ def Bar : SomeClass {
+ int X = 5;
+ }
+
+ def Foo {
+ SomeClass Baz = Bar;
+ }
+
+* value local to a ``def``, such as the use of ``Bar`` in::
+
+ def Foo {
+ int Bar = 5;
+ int Baz = Bar;
+ }
+
+* a template arg of a ``class``, such as the use of ``Bar`` in::
+
+ class Foo<int Bar> {
+ int Baz = Bar;
+ }
+
+* value local to a ``multiclass``, such as the use of ``Bar`` in::
+
+ multiclass Foo {
+ int Bar = 5;
+ int Baz = Bar;
+ }
+
+* a template arg to a ``multiclass``, such as the use of ``Bar`` in::
+
+ multiclass Foo<int Bar> {
+ int Baz = Bar;
+ }
+
+.. productionlist::
+ SimpleValue: `TokInteger`
+
+This represents the numeric value of the integer.
+
+.. productionlist::
+ SimpleValue: `TokString`+
+
+Multiple adjacent string literals are concatenated like in C/C++. The value
+is the concatenation of the strings.
+
+.. productionlist::
+ SimpleValue: `TokCodeFragment`
+
+The value is the string value of the code fragment.
+
+.. productionlist::
+ SimpleValue: "?"
+
+``?`` represents an "unset" initializer.
+
+.. productionlist::
+ SimpleValue: "{" `ValueList` "}"
+ ValueList: [`ValueListNE`]
+ ValueListNE: `Value` ("," `Value`)*
+
+This represents a sequence of bits, as would be used to initialize a
+``bits<n>`` field (where ``n`` is the number of bits).
+
+.. productionlist::
+ SimpleValue: `ClassID` "<" `ValueListNE` ">"
+
+This generates a new anonymous record definition (as would be created by an
+unnamed ``def`` inheriting from the given class with the given template
+arguments) and the value is the value of that record definition.
+
+.. productionlist::
+ SimpleValue: "[" `ValueList` "]" ["<" `Type` ">"]
+
+A list initializer. The optional :token:`Type` can be used to indicate a
+specific element type, otherwise the element type will be deduced from the
+given values.
+
+.. The initial `DagArg` of the dag must start with an identifier or
+ !cast, but this is more of an implementation detail and so for now just
+ leave it out.
+
+.. productionlist::
+ SimpleValue: "(" `DagArg` `DagArgList` ")"
+ DagArgList: `DagArg` ("," `DagArg`)*
+ DagArg: `Value` [":" `TokVarName`] | `TokVarName`
+
+The initial :token:`DagArg` is called the "operator" of the dag.
+
+.. productionlist::
+ SimpleValue: `BangOperator` ["<" `Type` ">"] "(" `ValueListNE` ")"
+
+Bodies
+------
+
+.. productionlist::
+ ObjectBody: `BaseClassList` `Body`
+ BaseClassList: [":" `BaseClassListNE`]
+ BaseClassListNE: `SubClassRef` ("," `SubClassRef`)*
+ SubClassRef: (`ClassID` | `MultiClassID`) ["<" `ValueList` ">"]
+ DefmID: `TokIdentifier`
+
+The version with the :token:`MultiClassID` is only valid in the
+:token:`BaseClassList` of a ``defm``.
+The :token:`MultiClassID` should be the name of a ``multiclass``.
+
+.. put this somewhere else
+
+It is after parsing the base class list that the "let stack" is applied.
+
+.. productionlist::
+ Body: ";" | "{" BodyList "}"
+ BodyList: BodyItem*
+ BodyItem: `Declaration` ";"
+ :| "let" `TokIdentifier` [`RangeList`] "=" `Value` ";"
+
+The ``let`` form allows overriding the value of an inherited field.
+
+``def``
+-------
+
+.. TODO::
+ There can be pastes in the names here, like ``#NAME#``. Look into that
+ and document it (it boils down to ParseIDValue with IDParseMode ==
+ ParseNameMode). ParseObjectName calls into the general ParseValue, with
+ the only different from "arbitrary expression parsing" being IDParseMode
+ == Mode.
+
+.. productionlist::
+ Def: "def" `TokIdentifier` `ObjectBody`
+
+Defines a record whose name is given by the :token:`TokIdentifier`. The
+fields of the record are inherited from the base classes and defined in the
+body.
+
+Special handling occurs if this ``def`` appears inside a ``multiclass`` or
+a ``foreach``.
+
+``defm``
+--------
+
+.. productionlist::
+ Defm: "defm" `TokIdentifier` ":" `BaseClassListNE` ";"
+
+Note that in the :token:`BaseClassList`, all of the ``multiclass``'s must
+precede any ``class``'s that appear.
+
+``foreach``
+-----------
+
+.. productionlist::
+ Foreach: "foreach" `Declaration` "in" "{" `Object`* "}"
+ :| "foreach" `Declaration` "in" `Object`
+
+The value assigned to the variable in the declaration is iterated over and
+the object or object list is reevaluated with the variable set at each
+iterated value.
+
+Top-Level ``let``
+-----------------
+
+.. productionlist::
+ Let: "let" `LetList` "in" "{" `Object`* "}"
+ :| "let" `LetList` "in" `Object`
+ LetList: `LetItem` ("," `LetItem`)*
+ LetItem: `TokIdentifier` [`RangeList`] "=" `Value`
+
+This is effectively equivalent to ``let`` inside the body of a record
+except that it applies to multiple records at a time. The bindings are
+applied at the end of parsing the base classes of a record.
+
+``multiclass``
+--------------
+
+.. productionlist::
+ MultiClass: "multiclass" `TokIdentifier` [`TemplateArgList`]
+ : [":" `BaseMultiClassList`] "{" `MultiClassObject`+ "}"
+ BaseMultiClassList: `MultiClassID` ("," `MultiClassID`)*
+ MultiClassID: `TokIdentifier`
+ MultiClassObject: `Def` | `Defm` | `Let` | `Foreach`
Added: www-releases/trunk/3.6.1/docs/_sources/TableGen/index.txt
URL: http://llvm.org/viewvc/llvm-project/www-releases/trunk/3.6.1/docs/_sources/TableGen/index.txt?rev=238135&view=auto
==============================================================================
--- www-releases/trunk/3.6.1/docs/_sources/TableGen/index.txt (added)
+++ www-releases/trunk/3.6.1/docs/_sources/TableGen/index.txt Mon May 25 08:53:02 2015
@@ -0,0 +1,308 @@
+========
+TableGen
+========
+
+.. contents::
+ :local:
+
+.. toctree::
+ :hidden:
+
+ BackEnds
+ LangRef
+ LangIntro
+ Deficiencies
+
+Introduction
+============
+
+TableGen's purpose is to help a human develop and maintain records of
+domain-specific information. Because there may be a large number of these
+records, it is specifically designed to allow writing flexible descriptions and
+for common features of these records to be factored out. This reduces the
+amount of duplication in the description, reduces the chance of error, and makes
+it easier to structure domain specific information.
+
+The core part of TableGen parses a file, instantiates the declarations, and
+hands the result off to a domain-specific `backend`_ for processing.
+
+The current major users of TableGen are :doc:`../CodeGenerator`
+and the
+`Clang diagnostics and attributes <http://clang.llvm.org/docs/UsersManual.html#controlling-errors-and-warnings>`_.
+
+Note that if you work on TableGen much, and use emacs or vim, that you can find
+an emacs "TableGen mode" and a vim language file in the ``llvm/utils/emacs`` and
+``llvm/utils/vim`` directories of your LLVM distribution, respectively.
+
+.. _intro:
+
+
+The TableGen program
+====================
+
+TableGen files are interpreted by the TableGen program: `llvm-tblgen` available
+on your build directory under `bin`. It is not installed in the system (or where
+your sysroot is set to), since it has no use beyond LLVM's build process.
+
+Running TableGen
+----------------
+
+TableGen runs just like any other LLVM tool. The first (optional) argument
+specifies the file to read. If a filename is not specified, ``llvm-tblgen``
+reads from standard input.
+
+To be useful, one of the `backends`_ must be used. These backends are
+selectable on the command line (type '``llvm-tblgen -help``' for a list). For
+example, to get a list of all of the definitions that subclass a particular type
+(which can be useful for building up an enum list of these records), use the
+``-print-enums`` option:
+
+.. code-block:: bash
+
+ $ llvm-tblgen X86.td -print-enums -class=Register
+ AH, AL, AX, BH, BL, BP, BPL, BX, CH, CL, CX, DH, DI, DIL, DL, DX, EAX, EBP, EBX,
+ ECX, EDI, EDX, EFLAGS, EIP, ESI, ESP, FP0, FP1, FP2, FP3, FP4, FP5, FP6, IP,
+ MM0, MM1, MM2, MM3, MM4, MM5, MM6, MM7, R10, R10B, R10D, R10W, R11, R11B, R11D,
+ R11W, R12, R12B, R12D, R12W, R13, R13B, R13D, R13W, R14, R14B, R14D, R14W, R15,
+ R15B, R15D, R15W, R8, R8B, R8D, R8W, R9, R9B, R9D, R9W, RAX, RBP, RBX, RCX, RDI,
+ RDX, RIP, RSI, RSP, SI, SIL, SP, SPL, ST0, ST1, ST2, ST3, ST4, ST5, ST6, ST7,
+ XMM0, XMM1, XMM10, XMM11, XMM12, XMM13, XMM14, XMM15, XMM2, XMM3, XMM4, XMM5,
+ XMM6, XMM7, XMM8, XMM9,
+
+ $ llvm-tblgen X86.td -print-enums -class=Instruction
+ ABS_F, ABS_Fp32, ABS_Fp64, ABS_Fp80, ADC32mi, ADC32mi8, ADC32mr, ADC32ri,
+ ADC32ri8, ADC32rm, ADC32rr, ADC64mi32, ADC64mi8, ADC64mr, ADC64ri32, ADC64ri8,
+ ADC64rm, ADC64rr, ADD16mi, ADD16mi8, ADD16mr, ADD16ri, ADD16ri8, ADD16rm,
+ ADD16rr, ADD32mi, ADD32mi8, ADD32mr, ADD32ri, ADD32ri8, ADD32rm, ADD32rr,
+ ADD64mi32, ADD64mi8, ADD64mr, ADD64ri32, ...
+
+The default backend prints out all of the records.
+
+If you plan to use TableGen, you will most likely have to write a `backend`_
+that extracts the information specific to what you need and formats it in the
+appropriate way.
+
+Example
+-------
+
+With no other arguments, `llvm-tblgen` parses the specified file and prints out all
+of the classes, then all of the definitions. This is a good way to see what the
+various definitions expand to fully. Running this on the ``X86.td`` file prints
+this (at the time of this writing):
+
+.. code-block:: llvm
+
+ ...
+ def ADD32rr { // Instruction X86Inst I
+ string Namespace = "X86";
+ dag OutOperandList = (outs GR32:$dst);
+ dag InOperandList = (ins GR32:$src1, GR32:$src2);
+ string AsmString = "add{l}\t{$src2, $dst|$dst, $src2}";
+ list<dag> Pattern = [(set GR32:$dst, (add GR32:$src1, GR32:$src2))];
+ list<Register> Uses = [];
+ list<Register> Defs = [EFLAGS];
+ list<Predicate> Predicates = [];
+ int CodeSize = 3;
+ int AddedComplexity = 0;
+ bit isReturn = 0;
+ bit isBranch = 0;
+ bit isIndirectBranch = 0;
+ bit isBarrier = 0;
+ bit isCall = 0;
+ bit canFoldAsLoad = 0;
+ bit mayLoad = 0;
+ bit mayStore = 0;
+ bit isImplicitDef = 0;
+ bit isConvertibleToThreeAddress = 1;
+ bit isCommutable = 1;
+ bit isTerminator = 0;
+ bit isReMaterializable = 0;
+ bit isPredicable = 0;
+ bit hasDelaySlot = 0;
+ bit usesCustomInserter = 0;
+ bit hasCtrlDep = 0;
+ bit isNotDuplicable = 0;
+ bit hasSideEffects = 0;
+ InstrItinClass Itinerary = NoItinerary;
+ string Constraints = "";
+ string DisableEncoding = "";
+ bits<8> Opcode = { 0, 0, 0, 0, 0, 0, 0, 1 };
+ Format Form = MRMDestReg;
+ bits<6> FormBits = { 0, 0, 0, 0, 1, 1 };
+ ImmType ImmT = NoImm;
+ bits<3> ImmTypeBits = { 0, 0, 0 };
+ bit hasOpSizePrefix = 0;
+ bit hasAdSizePrefix = 0;
+ bits<4> Prefix = { 0, 0, 0, 0 };
+ bit hasREX_WPrefix = 0;
+ FPFormat FPForm = ?;
+ bits<3> FPFormBits = { 0, 0, 0 };
+ }
+ ...
+
+This definition corresponds to the 32-bit register-register ``add`` instruction
+of the x86 architecture. ``def ADD32rr`` defines a record named
+``ADD32rr``, and the comment at the end of the line indicates the superclasses
+of the definition. The body of the record contains all of the data that
+TableGen assembled for the record, indicating that the instruction is part of
+the "X86" namespace, the pattern indicating how the instruction is selected by
+the code generator, that it is a two-address instruction, has a particular
+encoding, etc. The contents and semantics of the information in the record are
+specific to the needs of the X86 backend, and are only shown as an example.
+
+As you can see, a lot of information is needed for every instruction supported
+by the code generator, and specifying it all manually would be unmaintainable,
+prone to bugs, and tiring to do in the first place. Because we are using
+TableGen, all of the information was derived from the following definition:
+
+.. code-block:: llvm
+
+ let Defs = [EFLAGS],
+ isCommutable = 1, // X = ADD Y,Z --> X = ADD Z,Y
+ isConvertibleToThreeAddress = 1 in // Can transform into LEA.
+ def ADD32rr : I<0x01, MRMDestReg, (outs GR32:$dst),
+ (ins GR32:$src1, GR32:$src2),
+ "add{l}\t{$src2, $dst|$dst, $src2}",
+ [(set GR32:$dst, (add GR32:$src1, GR32:$src2))]>;
+
+This definition makes use of the custom class ``I`` (extended from the custom
+class ``X86Inst``), which is defined in the X86-specific TableGen file, to
+factor out the common features that instructions of its class share. A key
+feature of TableGen is that it allows the end-user to define the abstractions
+they prefer to use when describing their information.
+
+Each ``def`` record has a special entry called "NAME". This is the name of the
+record ("``ADD32rr``" above). In the general case ``def`` names can be formed
+from various kinds of string processing expressions and ``NAME`` resolves to the
+final value obtained after resolving all of those expressions. The user may
+refer to ``NAME`` anywhere she desires to use the ultimate name of the ``def``.
+``NAME`` should not be defined anywhere else in user code to avoid conflicts.
+
+Syntax
+======
+
+TableGen has a syntax that is loosely based on C++ templates, with built-in
+types and specification. In addition, TableGen's syntax introduces some
+automation concepts like multiclass, foreach, let, etc.
+
+Basic concepts
+--------------
+
+TableGen files consist of two key parts: 'classes' and 'definitions', both of
+which are considered 'records'.
+
+**TableGen records** have a unique name, a list of values, and a list of
+superclasses. The list of values is the main data that TableGen builds for each
+record; it is this that holds the domain specific information for the
+application. The interpretation of this data is left to a specific `backend`_,
+but the structure and format rules are taken care of and are fixed by
+TableGen.
+
+**TableGen definitions** are the concrete form of 'records'. These generally do
+not have any undefined values, and are marked with the '``def``' keyword.
+
+.. code-block:: llvm
+
+ def FeatureFPARMv8 : SubtargetFeature<"fp-armv8", "HasFPARMv8", "true",
+ "Enable ARMv8 FP">;
+
+In this example, FeatureFPARMv8 is ``SubtargetFeature`` record initialised
+with some values. The names of the classes are defined via the
+keyword `class` either on the same file or some other included. Most target
+TableGen files include the generic ones in ``include/llvm/Target``.
+
+**TableGen classes** are abstract records that are used to build and describe
+other records. These classes allow the end-user to build abstractions for
+either the domain they are targeting (such as "Register", "RegisterClass", and
+"Instruction" in the LLVM code generator) or for the implementor to help factor
+out common properties of records (such as "FPInst", which is used to represent
+floating point instructions in the X86 backend). TableGen keeps track of all of
+the classes that are used to build up a definition, so the backend can find all
+definitions of a particular class, such as "Instruction".
+
+.. code-block:: llvm
+
+ class ProcNoItin<string Name, list<SubtargetFeature> Features>
+ : Processor<Name, NoItineraries, Features>;
+
+Here, the class ProcNoItin, receiving parameters `Name` of type `string` and
+a list of target features is specializing the class Processor by passing the
+arguments down as well as hard-coding NoItineraries.
+
+**TableGen multiclasses** are groups of abstract records that are instantiated
+all at once. Each instantiation can result in multiple TableGen definitions.
+If a multiclass inherits from another multiclass, the definitions in the
+sub-multiclass become part of the current multiclass, as if they were declared
+in the current multiclass.
+
+.. code-block:: llvm
+
+ multiclass ro_signed_pats<string T, string Rm, dag Base, dag Offset, dag Extend,
+ dag address, ValueType sty> {
+ def : Pat<(i32 (!cast<SDNode>("sextload" # sty) address)),
+ (!cast<Instruction>("LDRS" # T # "w_" # Rm # "_RegOffset")
+ Base, Offset, Extend)>;
+
+ def : Pat<(i64 (!cast<SDNode>("sextload" # sty) address)),
+ (!cast<Instruction>("LDRS" # T # "x_" # Rm # "_RegOffset")
+ Base, Offset, Extend)>;
+ }
+
+ defm : ro_signed_pats<"B", Rm, Base, Offset, Extend,
+ !foreach(decls.pattern, address,
+ !subst(SHIFT, imm_eq0, decls.pattern)),
+ i8>;
+
+
+
+See the :doc:`TableGen Language Introduction <LangIntro>` for more generic
+information on the usage of the language, and the
+:doc:`TableGen Language Reference <LangRef>` for more in-depth description
+of the formal language specification.
+
+.. _backend:
+.. _backends:
+
+TableGen backends
+=================
+
+TableGen files have no real meaning without a back-end. The default operation
+of running ``llvm-tblgen`` is to print the information in a textual format, but
+that's only useful for debugging of the TableGen files themselves. The power
+in TableGen is, however, to interpret the source files into an internal
+representation that can be generated into anything you want.
+
+Current usage of TableGen is to create huge include files with tables that you
+can either include directly (if the output is in the language you're coding),
+or be used in pre-processing via macros surrounding the include of the file.
+
+Direct output can be used if the back-end already prints a table in C format
+or if the output is just a list of strings (for error and warning messages).
+Pre-processed output should be used if the same information needs to be used
+in different contexts (like Instruction names), so your back-end should print
+a meta-information list that can be shaped into different compile-time formats.
+
+See the `TableGen BackEnds <BackEnds.html>`_ for more information.
+
+TableGen Deficiencies
+=====================
+
+Despite being very generic, TableGen has some deficiencies that have been
+pointed out numerous times. The common theme is that, while TableGen allows
+you to build Domain-Specific-Languages, the final languages that you create
+lack the power of other DSLs, which in turn increase considerably the size
+and complexity of TableGen files.
+
+At the same time, TableGen allows you to create virtually any meaning of
+the basic concepts via custom-made back-ends, which can pervert the original
+design and make it very hard for newcomers to understand the evil TableGen
+file.
+
+There are some in favour of extending the semantics even more, but making sure
+back-ends adhere to strict rules. Others are suggesting we should move to less,
+more powerful DSLs designed with specific purposes, or even re-using existing
+DSLs.
+
+Either way, this is a discussion that will likely span across several years,
+if not decades. You can read more in the `TableGen Deficiencies <Deficiencies.html>`_
+document.
Added: www-releases/trunk/3.6.1/docs/_sources/TableGenFundamentals.txt
URL: http://llvm.org/viewvc/llvm-project/www-releases/trunk/3.6.1/docs/_sources/TableGenFundamentals.txt?rev=238135&view=auto
==============================================================================
--- www-releases/trunk/3.6.1/docs/_sources/TableGenFundamentals.txt (added)
+++ www-releases/trunk/3.6.1/docs/_sources/TableGenFundamentals.txt Mon May 25 08:53:02 2015
@@ -0,0 +1,10 @@
+=====================
+TableGen Fundamentals
+=====================
+
+Moved
+=====
+
+The TableGen fundamentals documentation has moved to a directory on its own
+and is now available at :doc:`TableGen/index`. Please, change your links to
+that page.
Added: www-releases/trunk/3.6.1/docs/_sources/TestSuiteMakefileGuide.txt
URL: http://llvm.org/viewvc/llvm-project/www-releases/trunk/3.6.1/docs/_sources/TestSuiteMakefileGuide.txt?rev=238135&view=auto
==============================================================================
--- www-releases/trunk/3.6.1/docs/_sources/TestSuiteMakefileGuide.txt (added)
+++ www-releases/trunk/3.6.1/docs/_sources/TestSuiteMakefileGuide.txt Mon May 25 08:53:02 2015
@@ -0,0 +1,276 @@
+==============================
+LLVM test-suite Makefile Guide
+==============================
+
+.. contents::
+ :local:
+
+Overview
+========
+
+This document describes the features of the Makefile-based LLVM
+test-suite. This way of interacting with the test-suite is deprecated in
+favor of running the test-suite using LNT, but may continue to prove
+useful for some users. See the Testing Guide's :ref:`test-suite Quickstart
+<test-suite-quickstart>` section for more information.
+
+Test suite Structure
+====================
+
+The ``test-suite`` module contains a number of programs that can be
+compiled with LLVM and executed. These programs are compiled using the
+native compiler and various LLVM backends. The output from the program
+compiled with the native compiler is assumed correct; the results from
+the other programs are compared to the native program output and pass if
+they match.
+
+When executing tests, it is usually a good idea to start out with a
+subset of the available tests or programs. This makes test run times
+smaller at first and later on this is useful to investigate individual
+test failures. To run some test only on a subset of programs, simply
+change directory to the programs you want tested and run ``gmake``
+there. Alternatively, you can run a different test using the ``TEST``
+variable to change what tests or run on the selected programs (see below
+for more info).
+
+In addition for testing correctness, the ``test-suite`` directory also
+performs timing tests of various LLVM optimizations. It also records
+compilation times for the compilers and the JIT. This information can be
+used to compare the effectiveness of LLVM's optimizations and code
+generation.
+
+``test-suite`` tests are divided into three types of tests: MultiSource,
+SingleSource, and External.
+
+- ``test-suite/SingleSource``
+
+ The SingleSource directory contains test programs that are only a
+ single source file in size. These are usually small benchmark
+ programs or small programs that calculate a particular value. Several
+ such programs are grouped together in each directory.
+
+- ``test-suite/MultiSource``
+
+ The MultiSource directory contains subdirectories which contain
+ entire programs with multiple source files. Large benchmarks and
+ whole applications go here.
+
+- ``test-suite/External``
+
+ The External directory contains Makefiles for building code that is
+ external to (i.e., not distributed with) LLVM. The most prominent
+ members of this directory are the SPEC 95 and SPEC 2000 benchmark
+ suites. The ``External`` directory does not contain these actual
+ tests, but only the Makefiles that know how to properly compile these
+ programs from somewhere else. The presence and location of these
+ external programs is configured by the test-suite ``configure``
+ script.
+
+Each tree is then subdivided into several categories, including
+applications, benchmarks, regression tests, code that is strange
+grammatically, etc. These organizations should be relatively self
+explanatory.
+
+Some tests are known to fail. Some are bugs that we have not fixed yet;
+others are features that we haven't added yet (or may never add). In the
+regression tests, the result for such tests will be XFAIL (eXpected
+FAILure). In this way, you can tell the difference between an expected
+and unexpected failure.
+
+The tests in the test suite have no such feature at this time. If the
+test passes, only warnings and other miscellaneous output will be
+generated. If a test fails, a large <program> FAILED message will be
+displayed. This will help you separate benign warnings from actual test
+failures.
+
+Running the test suite
+======================
+
+First, all tests are executed within the LLVM object directory tree.
+They *are not* executed inside of the LLVM source tree. This is because
+the test suite creates temporary files during execution.
+
+To run the test suite, you need to use the following steps:
+
+#. ``cd`` into the ``llvm/projects`` directory in your source tree.
+#. Check out the ``test-suite`` module with:
+
+ .. code-block:: bash
+
+ % svn co http://llvm.org/svn/llvm-project/test-suite/trunk test-suite
+
+ This will get the test suite into ``llvm/projects/test-suite``.
+
+#. Configure and build ``llvm``.
+
+#. Configure and build ``llvm-gcc``.
+
+#. Install ``llvm-gcc`` somewhere.
+
+#. *Re-configure* ``llvm`` from the top level of each build tree (LLVM
+ object directory tree) in which you want to run the test suite, just
+ as you do before building LLVM.
+
+ During the *re-configuration*, you must either: (1) have ``llvm-gcc``
+ you just built in your path, or (2) specify the directory where your
+ just-built ``llvm-gcc`` is installed using
+ ``--with-llvmgccdir=$LLVM_GCC_DIR``.
+
+ You must also tell the configure machinery that the test suite is
+ available so it can be configured for your build tree:
+
+ .. code-block:: bash
+
+ % cd $LLVM_OBJ_ROOT ; $LLVM_SRC_ROOT/configure [--with-llvmgccdir=$LLVM_GCC_DIR]
+
+ [Remember that ``$LLVM_GCC_DIR`` is the directory where you
+ *installed* llvm-gcc, not its src or obj directory.]
+
+#. You can now run the test suite from your build tree as follows:
+
+ .. code-block:: bash
+
+ % cd $LLVM_OBJ_ROOT/projects/test-suite
+ % make
+
+Note that the second and third steps only need to be done once. After
+you have the suite checked out and configured, you don't need to do it
+again (unless the test code or configure script changes).
+
+Configuring External Tests
+--------------------------
+
+In order to run the External tests in the ``test-suite`` module, you
+must specify *--with-externals*. This must be done during the
+*re-configuration* step (see above), and the ``llvm`` re-configuration
+must recognize the previously-built ``llvm-gcc``. If any of these is
+missing or neglected, the External tests won't work.
+
+* *--with-externals*
+
+* *--with-externals=<directory>*
+
+This tells LLVM where to find any external tests. They are expected to
+be in specifically named subdirectories of <``directory``>. If
+``directory`` is left unspecified, ``configure`` uses the default value
+``/home/vadve/shared/benchmarks/speccpu2000/benchspec``. Subdirectory
+names known to LLVM include:
+
+* spec95
+
+* speccpu2000
+
+* speccpu2006
+
+* povray31
+
+Others are added from time to time, and can be determined from
+``configure``.
+
+Running different tests
+-----------------------
+
+In addition to the regular "whole program" tests, the ``test-suite``
+module also provides a mechanism for compiling the programs in different
+ways. If the variable TEST is defined on the ``gmake`` command line, the
+test system will include a Makefile named
+``TEST.<value of TEST variable>.Makefile``. This Makefile can modify
+build rules to yield different results.
+
+For example, the LLVM nightly tester uses ``TEST.nightly.Makefile`` to
+create the nightly test reports. To run the nightly tests, run
+``gmake TEST=nightly``.
+
+There are several TEST Makefiles available in the tree. Some of them are
+designed for internal LLVM research and will not work outside of the
+LLVM research group. They may still be valuable, however, as a guide to
+writing your own TEST Makefile for any optimization or analysis passes
+that you develop with LLVM.
+
+Generating test output
+----------------------
+
+There are a number of ways to run the tests and generate output. The
+most simple one is simply running ``gmake`` with no arguments. This will
+compile and run all programs in the tree using a number of different
+methods and compare results. Any failures are reported in the output,
+but are likely drowned in the other output. Passes are not reported
+explicitly.
+
+Somewhat better is running ``gmake TEST=sometest test``, which runs the
+specified test and usually adds per-program summaries to the output
+(depending on which sometest you use). For example, the ``nightly`` test
+explicitly outputs TEST-PASS or TEST-FAIL for every test after each
+program. Though these lines are still drowned in the output, it's easy
+to grep the output logs in the Output directories.
+
+Even better are the ``report`` and ``report.format`` targets (where
+``format`` is one of ``html``, ``csv``, ``text`` or ``graphs``). The
+exact contents of the report are dependent on which ``TEST`` you are
+running, but the text results are always shown at the end of the run and
+the results are always stored in the ``report.<type>.format`` file (when
+running with ``TEST=<type>``). The ``report`` also generate a file
+called ``report.<type>.raw.out`` containing the output of the entire
+test run.
+
+Writing custom tests for the test suite
+---------------------------------------
+
+Assuming you can run the test suite, (e.g.
+"``gmake TEST=nightly report``" should work), it is really easy to run
+optimizations or code generator components against every program in the
+tree, collecting statistics or running custom checks for correctness. At
+base, this is how the nightly tester works, it's just one example of a
+general framework.
+
+Lets say that you have an LLVM optimization pass, and you want to see
+how many times it triggers. First thing you should do is add an LLVM
+`statistic <ProgrammersManual.html#Statistic>`_ to your pass, which will
+tally counts of things you care about.
+
+Following this, you can set up a test and a report that collects these
+and formats them for easy viewing. This consists of two files, a
+"``test-suite/TEST.XXX.Makefile``" fragment (where XXX is the name of
+your test) and a "``test-suite/TEST.XXX.report``" file that indicates
+how to format the output into a table. There are many example reports of
+various levels of sophistication included with the test suite, and the
+framework is very general.
+
+If you are interested in testing an optimization pass, check out the
+"libcalls" test as an example. It can be run like this:
+
+.. code-block:: bash
+
+ % cd llvm/projects/test-suite/MultiSource/Benchmarks # or some other level
+ % make TEST=libcalls report
+
+This will do a bunch of stuff, then eventually print a table like this:
+
+::
+
+ Name | total | #exit |
+ ...
+ FreeBench/analyzer/analyzer | 51 | 6 |
+ FreeBench/fourinarow/fourinarow | 1 | 1 |
+ FreeBench/neural/neural | 19 | 9 |
+ FreeBench/pifft/pifft | 5 | 3 |
+ MallocBench/cfrac/cfrac | 1 | * |
+ MallocBench/espresso/espresso | 52 | 12 |
+ MallocBench/gs/gs | 4 | * |
+ Prolangs-C/TimberWolfMC/timberwolfmc | 302 | * |
+ Prolangs-C/agrep/agrep | 33 | 12 |
+ Prolangs-C/allroots/allroots | * | * |
+ Prolangs-C/assembler/assembler | 47 | * |
+ Prolangs-C/bison/mybison | 74 | * |
+ ...
+
+This basically is grepping the -stats output and displaying it in a
+table. You can also use the "TEST=libcalls report.html" target to get
+the table in HTML form, similarly for report.csv and report.tex.
+
+The source for this is in ``test-suite/TEST.libcalls.*``. The format is
+pretty simple: the Makefile indicates how to run the test (in this case,
+"``opt -simplify-libcalls -stats``"), and the report contains one line
+for each column of the output. The first value is the header for the
+column and the second is the regex to grep the output of the command
+for. There are lots of example reports that can do fancy stuff.
Added: www-releases/trunk/3.6.1/docs/_sources/TestingGuide.txt
URL: http://llvm.org/viewvc/llvm-project/www-releases/trunk/3.6.1/docs/_sources/TestingGuide.txt?rev=238135&view=auto
==============================================================================
--- www-releases/trunk/3.6.1/docs/_sources/TestingGuide.txt (added)
+++ www-releases/trunk/3.6.1/docs/_sources/TestingGuide.txt Mon May 25 08:53:02 2015
@@ -0,0 +1,581 @@
+=================================
+LLVM Testing Infrastructure Guide
+=================================
+
+.. contents::
+ :local:
+
+.. toctree::
+ :hidden:
+
+ TestSuiteMakefileGuide
+
+Overview
+========
+
+This document is the reference manual for the LLVM testing
+infrastructure. It documents the structure of the LLVM testing
+infrastructure, the tools needed to use it, and how to add and run
+tests.
+
+Requirements
+============
+
+In order to use the LLVM testing infrastructure, you will need all of the
+software required to build LLVM, as well as `Python <http://python.org>`_ 2.7 or
+later.
+
+LLVM testing infrastructure organization
+========================================
+
+The LLVM testing infrastructure contains two major categories of tests:
+regression tests and whole programs. The regression tests are contained
+inside the LLVM repository itself under ``llvm/test`` and are expected
+to always pass -- they should be run before every commit.
+
+The whole programs tests are referred to as the "LLVM test suite" (or
+"test-suite") and are in the ``test-suite`` module in subversion. For
+historical reasons, these tests are also referred to as the "nightly
+tests" in places, which is less ambiguous than "test-suite" and remains
+in use although we run them much more often than nightly.
+
+Regression tests
+----------------
+
+The regression tests are small pieces of code that test a specific
+feature of LLVM or trigger a specific bug in LLVM. The language they are
+written in depends on the part of LLVM being tested. These tests are driven by
+the :doc:`Lit <CommandGuide/lit>` testing tool (which is part of LLVM), and
+are located in the ``llvm/test`` directory.
+
+Typically when a bug is found in LLVM, a regression test containing just
+enough code to reproduce the problem should be written and placed
+somewhere underneath this directory. For example, it can be a small
+piece of LLVM IR distilled from an actual application or benchmark.
+
+``test-suite``
+--------------
+
+The test suite contains whole programs, which are pieces of code which
+can be compiled and linked into a stand-alone program that can be
+executed. These programs are generally written in high level languages
+such as C or C++.
+
+These programs are compiled using a user specified compiler and set of
+flags, and then executed to capture the program output and timing
+information. The output of these programs is compared to a reference
+output to ensure that the program is being compiled correctly.
+
+In addition to compiling and executing programs, whole program tests
+serve as a way of benchmarking LLVM performance, both in terms of the
+efficiency of the programs generated as well as the speed with which
+LLVM compiles, optimizes, and generates code.
+
+The test-suite is located in the ``test-suite`` Subversion module.
+
+Debugging Information tests
+---------------------------
+
+The test suite contains tests to check quality of debugging information.
+The test are written in C based languages or in LLVM assembly language.
+
+These tests are compiled and run under a debugger. The debugger output
+is checked to validate of debugging information. See README.txt in the
+test suite for more information . This test suite is located in the
+``debuginfo-tests`` Subversion module.
+
+Quick start
+===========
+
+The tests are located in two separate Subversion modules. The
+regressions tests are in the main "llvm" module under the directory
+``llvm/test`` (so you get these tests for free with the main LLVM tree).
+Use ``make check-all`` to run the regression tests after building LLVM.
+
+The more comprehensive test suite that includes whole programs in C and C++
+is in the ``test-suite`` module. See :ref:`test-suite Quickstart
+<test-suite-quickstart>` for more information on running these tests.
+
+Regression tests
+----------------
+
+To run all of the LLVM regression tests, use the master Makefile in the
+``llvm/test`` directory. LLVM Makefiles require GNU Make (read the :doc:`LLVM
+Makefile Guide <MakefileGuide>` for more details):
+
+.. code-block:: bash
+
+ % make -C llvm/test
+
+or:
+
+.. code-block:: bash
+
+ % make check
+
+If you have `Clang <http://clang.llvm.org/>`_ checked out and built, you
+can run the LLVM and Clang tests simultaneously using:
+
+.. code-block:: bash
+
+ % make check-all
+
+To run the tests with Valgrind (Memcheck by default), use the ``LIT_ARGS`` make
+variable to pass the required options to lit. For example, you can use:
+
+.. code-block:: bash
+
+ % make check LIT_ARGS="-v --vg --vg-leak"
+
+to enable testing with valgrind and with leak checking enabled.
+
+To run individual tests or subsets of tests, you can use the ``llvm-lit``
+script which is built as part of LLVM. For example, to run the
+``Integer/BitPacked.ll`` test by itself you can run:
+
+.. code-block:: bash
+
+ % llvm-lit ~/llvm/test/Integer/BitPacked.ll
+
+or to run all of the ARM CodeGen tests:
+
+.. code-block:: bash
+
+ % llvm-lit ~/llvm/test/CodeGen/ARM
+
+For more information on using the :program:`lit` tool, see ``llvm-lit --help``
+or the :doc:`lit man page <CommandGuide/lit>`.
+
+Debugging Information tests
+---------------------------
+
+To run debugging information tests simply checkout the tests inside
+clang/test directory.
+
+.. code-block:: bash
+
+ % cd clang/test
+ % svn co http://llvm.org/svn/llvm-project/debuginfo-tests/trunk debuginfo-tests
+
+These tests are already set up to run as part of clang regression tests.
+
+Regression test structure
+=========================
+
+The LLVM regression tests are driven by :program:`lit` and are located in the
+``llvm/test`` directory.
+
+This directory contains a large array of small tests that exercise
+various features of LLVM and to ensure that regressions do not occur.
+The directory is broken into several sub-directories, each focused on a
+particular area of LLVM.
+
+Writing new regression tests
+----------------------------
+
+The regression test structure is very simple, but does require some
+information to be set. This information is gathered via ``configure``
+and is written to a file, ``test/lit.site.cfg`` in the build directory.
+The ``llvm/test`` Makefile does this work for you.
+
+In order for the regression tests to work, each directory of tests must
+have a ``lit.local.cfg`` file. :program:`lit` looks for this file to determine
+how to run the tests. This file is just Python code and thus is very
+flexible, but we've standardized it for the LLVM regression tests. If
+you're adding a directory of tests, just copy ``lit.local.cfg`` from
+another directory to get running. The standard ``lit.local.cfg`` simply
+specifies which files to look in for tests. Any directory that contains
+only directories does not need the ``lit.local.cfg`` file. Read the :doc:`Lit
+documentation <CommandGuide/lit>` for more information.
+
+Each test file must contain lines starting with "RUN:" that tell :program:`lit`
+how to run it. If there are no RUN lines, :program:`lit` will issue an error
+while running a test.
+
+RUN lines are specified in the comments of the test program using the
+keyword ``RUN`` followed by a colon, and lastly the command (pipeline)
+to execute. Together, these lines form the "script" that :program:`lit`
+executes to run the test case. The syntax of the RUN lines is similar to a
+shell's syntax for pipelines including I/O redirection and variable
+substitution. However, even though these lines may *look* like a shell
+script, they are not. RUN lines are interpreted by :program:`lit`.
+Consequently, the syntax differs from shell in a few ways. You can specify
+as many RUN lines as needed.
+
+:program:`lit` performs substitution on each RUN line to replace LLVM tool names
+with the full paths to the executable built for each tool (in
+``$(LLVM_OBJ_ROOT)/$(BuildMode)/bin)``. This ensures that :program:`lit` does
+not invoke any stray LLVM tools in the user's path during testing.
+
+Each RUN line is executed on its own, distinct from other lines unless
+its last character is ``\``. This continuation character causes the RUN
+line to be concatenated with the next one. In this way you can build up
+long pipelines of commands without making huge line lengths. The lines
+ending in ``\`` are concatenated until a RUN line that doesn't end in
+``\`` is found. This concatenated set of RUN lines then constitutes one
+execution. :program:`lit` will substitute variables and arrange for the pipeline
+to be executed. If any process in the pipeline fails, the entire line (and
+test case) fails too.
+
+Below is an example of legal RUN lines in a ``.ll`` file:
+
+.. code-block:: llvm
+
+ ; RUN: llvm-as < %s | llvm-dis > %t1
+ ; RUN: llvm-dis < %s.bc-13 > %t2
+ ; RUN: diff %t1 %t2
+
+As with a Unix shell, the RUN lines permit pipelines and I/O
+redirection to be used.
+
+There are some quoting rules that you must pay attention to when writing
+your RUN lines. In general nothing needs to be quoted. :program:`lit` won't
+strip off any quote characters so they will get passed to the invoked program.
+To avoid this use curly braces to tell :program:`lit` that it should treat
+everything enclosed as one value.
+
+In general, you should strive to keep your RUN lines as simple as possible,
+using them only to run tools that generate textual output you can then examine.
+The recommended way to examine output to figure out if the test passes is using
+the :doc:`FileCheck tool <CommandGuide/FileCheck>`. *[The usage of grep in RUN
+lines is deprecated - please do not send or commit patches that use it.]*
+
+Extra files
+-----------
+
+If your test requires extra files besides the file containing the ``RUN:``
+lines, the idiomatic place to put them is in a subdirectory ``Inputs``.
+You can then refer to the extra files as ``%S/Inputs/foo.bar``.
+
+For example, consider ``test/Linker/ident.ll``. The directory structure is
+as follows::
+
+ test/
+ Linker/
+ ident.ll
+ Inputs/
+ ident.a.ll
+ ident.b.ll
+
+For convenience, these are the contents:
+
+.. code-block:: llvm
+
+ ;;;;; ident.ll:
+
+ ; RUN: llvm-link %S/Inputs/ident.a.ll %S/Inputs/ident.b.ll -S | FileCheck %s
+
+ ; Verify that multiple input llvm.ident metadata are linked together.
+
+ ; CHECK-DAG: !llvm.ident = !{!0, !1, !2}
+ ; CHECK-DAG: "Compiler V1"
+ ; CHECK-DAG: "Compiler V2"
+ ; CHECK-DAG: "Compiler V3"
+
+ ;;;;; Inputs/ident.a.ll:
+
+ !llvm.ident = !{!0, !1}
+ !0 = metadata !{metadata !"Compiler V1"}
+ !1 = metadata !{metadata !"Compiler V2"}
+
+ ;;;;; Inputs/ident.b.ll:
+
+ !llvm.ident = !{!0}
+ !0 = metadata !{metadata !"Compiler V3"}
+
+For symmetry reasons, ``ident.ll`` is just a dummy file that doesn't
+actually participate in the test besides holding the ``RUN:`` lines.
+
+.. note::
+
+ Some existing tests use ``RUN: true`` in extra files instead of just
+ putting the extra files in an ``Inputs/`` directory. This pattern is
+ deprecated.
+
+Fragile tests
+-------------
+
+It is easy to write a fragile test that would fail spuriously if the tool being
+tested outputs a full path to the input file. For example, :program:`opt` by
+default outputs a ``ModuleID``:
+
+.. code-block:: console
+
+ $ cat example.ll
+ define i32 @main() nounwind {
+ ret i32 0
+ }
+
+ $ opt -S /path/to/example.ll
+ ; ModuleID = '/path/to/example.ll'
+
+ define i32 @main() nounwind {
+ ret i32 0
+ }
+
+``ModuleID`` can unexpetedly match against ``CHECK`` lines. For example:
+
+.. code-block:: llvm
+
+ ; RUN: opt -S %s | FileCheck
+
+ define i32 @main() nounwind {
+ ; CHECK-NOT: load
+ ret i32 0
+ }
+
+This test will fail if placed into a ``download`` directory.
+
+To make your tests robust, always use ``opt ... < %s`` in the RUN line.
+:program:`opt` does not output a ``ModuleID`` when input comes from stdin.
+
+Platform-Specific Tests
+-----------------------
+
+Whenever adding tests that require the knowledge of a specific platform,
+either related to code generated, specific output or back-end features,
+you must make sure to isolate the features, so that buildbots that
+run on different architectures (and don't even compile all back-ends),
+don't fail.
+
+The first problem is to check for target-specific output, for example sizes
+of structures, paths and architecture names, for example:
+
+* Tests containing Windows paths will fail on Linux and vice-versa.
+* Tests that check for ``x86_64`` somewhere in the text will fail anywhere else.
+* Tests where the debug information calculates the size of types and structures.
+
+Also, if the test rely on any behaviour that is coded in any back-end, it must
+go in its own directory. So, for instance, code generator tests for ARM go
+into ``test/CodeGen/ARM`` and so on. Those directories contain a special
+``lit`` configuration file that ensure all tests in that directory will
+only run if a specific back-end is compiled and available.
+
+For instance, on ``test/CodeGen/ARM``, the ``lit.local.cfg`` is:
+
+.. code-block:: python
+
+ config.suffixes = ['.ll', '.c', '.cpp', '.test']
+ if not 'ARM' in config.root.targets:
+ config.unsupported = True
+
+Other platform-specific tests are those that depend on a specific feature
+of a specific sub-architecture, for example only to Intel chips that support ``AVX2``.
+
+For instance, ``test/CodeGen/X86/psubus.ll`` tests three sub-architecture
+variants:
+
+.. code-block:: llvm
+
+ ; RUN: llc -mcpu=core2 < %s | FileCheck %s -check-prefix=SSE2
+ ; RUN: llc -mcpu=corei7-avx < %s | FileCheck %s -check-prefix=AVX1
+ ; RUN: llc -mcpu=core-avx2 < %s | FileCheck %s -check-prefix=AVX2
+
+And the checks are different:
+
+.. code-block:: llvm
+
+ ; SSE2: @test1
+ ; SSE2: psubusw LCPI0_0(%rip), %xmm0
+ ; AVX1: @test1
+ ; AVX1: vpsubusw LCPI0_0(%rip), %xmm0, %xmm0
+ ; AVX2: @test1
+ ; AVX2: vpsubusw LCPI0_0(%rip), %xmm0, %xmm0
+
+So, if you're testing for a behaviour that you know is platform-specific or
+depends on special features of sub-architectures, you must add the specific
+triple, test with the specific FileCheck and put it into the specific
+directory that will filter out all other architectures.
+
+
+Substitutions
+-------------
+
+Besides replacing LLVM tool names the following substitutions are performed in
+RUN lines:
+
+``%%``
+ Replaced by a single ``%``. This allows escaping other substitutions.
+
+``%s``
+ File path to the test case's source. This is suitable for passing on the
+ command line as the input to an LLVM tool.
+
+ Example: ``/home/user/llvm/test/MC/ELF/foo_test.s``
+
+``%S``
+ Directory path to the test case's source.
+
+ Example: ``/home/user/llvm/test/MC/ELF``
+
+``%t``
+ File path to a temporary file name that could be used for this test case.
+ The file name won't conflict with other test cases. You can append to it
+ if you need multiple temporaries. This is useful as the destination of
+ some redirected output.
+
+ Example: ``/home/user/llvm.build/test/MC/ELF/Output/foo_test.s.tmp``
+
+``%T``
+ Directory of ``%t``.
+
+ Example: ``/home/user/llvm.build/test/MC/ELF/Output``
+
+``%{pathsep}``
+
+ Expands to the path separator, i.e. ``:`` (or ``;`` on Windows).
+
+
+**LLVM-specific substitutions:**
+
+``%shlibext``
+ The suffix for the host platforms shared library files. This includes the
+ period as the first character.
+
+ Example: ``.so`` (Linux), ``.dylib`` (OS X), ``.dll`` (Windows)
+
+``%exeext``
+ The suffix for the host platforms executable files. This includes the
+ period as the first character.
+
+ Example: ``.exe`` (Windows), empty on Linux.
+
+``%(line)``, ``%(line+<number>)``, ``%(line-<number>)``
+ The number of the line where this substitution is used, with an optional
+ integer offset. This can be used in tests with multiple RUN lines, which
+ reference test file's line numbers.
+
+
+**Clang-specific substitutions:**
+
+``%clang``
+ Invokes the Clang driver.
+
+``%clang_cpp``
+ Invokes the Clang driver for C++.
+
+``%clang_cl``
+ Invokes the CL-compatible Clang driver.
+
+``%clangxx``
+ Invokes the G++-compatible Clang driver.
+
+``%clang_cc1``
+ Invokes the Clang frontend.
+
+``%itanium_abi_triple``, ``%ms_abi_triple``
+ These substitutions can be used to get the current target triple adjusted to
+ the desired ABI. For example, if the test suite is running with the
+ ``i686-pc-win32`` target, ``%itanium_abi_triple`` will expand to
+ ``i686-pc-mingw32``. This allows a test to run with a specific ABI without
+ constraining it to a specific triple.
+
+To add more substituations, look at ``test/lit.cfg`` or ``lit.local.cfg``.
+
+
+Other Features
+--------------
+
+To make RUN line writing easier, there are several helper programs. These
+helpers are in the PATH when running tests, so you can just call them using
+their name. For example:
+
+``not``
+ This program runs its arguments and then inverts the result code from it.
+ Zero result codes become 1. Non-zero result codes become 0.
+
+Sometimes it is necessary to mark a test case as "expected fail" or
+XFAIL. You can easily mark a test as XFAIL just by including ``XFAIL:``
+on a line near the top of the file. This signals that the test case
+should succeed if the test fails. Such test cases are counted separately
+by the testing tool. To specify an expected fail, use the XFAIL keyword
+in the comments of the test program followed by a colon and one or more
+failure patterns. Each failure pattern can be either ``*`` (to specify
+fail everywhere), or a part of a target triple (indicating the test
+should fail on that platform), or the name of a configurable feature
+(for example, ``loadable_module``). If there is a match, the test is
+expected to fail. If not, the test is expected to succeed. To XFAIL
+everywhere just specify ``XFAIL: *``. Here is an example of an ``XFAIL``
+line:
+
+.. code-block:: llvm
+
+ ; XFAIL: darwin,sun
+
+To make the output more useful, :program:`lit` will scan
+the lines of the test case for ones that contain a pattern that matches
+``PR[0-9]+``. This is the syntax for specifying a PR (Problem Report) number
+that is related to the test case. The number after "PR" specifies the
+LLVM bugzilla number. When a PR number is specified, it will be used in
+the pass/fail reporting. This is useful to quickly get some context when
+a test fails.
+
+Finally, any line that contains "END." will cause the special
+interpretation of lines to terminate. This is generally done right after
+the last RUN: line. This has two side effects:
+
+(a) it prevents special interpretation of lines that are part of the test
+ program, not the instructions to the test case, and
+
+(b) it speeds things up for really big test cases by avoiding
+ interpretation of the remainder of the file.
+
+``test-suite`` Overview
+=======================
+
+The ``test-suite`` module contains a number of programs that can be
+compiled and executed. The ``test-suite`` includes reference outputs for
+all of the programs, so that the output of the executed program can be
+checked for correctness.
+
+``test-suite`` tests are divided into three types of tests: MultiSource,
+SingleSource, and External.
+
+- ``test-suite/SingleSource``
+
+ The SingleSource directory contains test programs that are only a
+ single source file in size. These are usually small benchmark
+ programs or small programs that calculate a particular value. Several
+ such programs are grouped together in each directory.
+
+- ``test-suite/MultiSource``
+
+ The MultiSource directory contains subdirectories which contain
+ entire programs with multiple source files. Large benchmarks and
+ whole applications go here.
+
+- ``test-suite/External``
+
+ The External directory contains Makefiles for building code that is
+ external to (i.e., not distributed with) LLVM. The most prominent
+ members of this directory are the SPEC 95 and SPEC 2000 benchmark
+ suites. The ``External`` directory does not contain these actual
+ tests, but only the Makefiles that know how to properly compile these
+ programs from somewhere else. When using ``LNT``, use the
+ ``--test-externals`` option to include these tests in the results.
+
+.. _test-suite-quickstart:
+
+``test-suite`` Quickstart
+-------------------------
+
+The modern way of running the ``test-suite`` is focused on testing and
+benchmarking complete compilers using the
+`LNT <http://llvm.org/docs/lnt>`_ testing infrastructure.
+
+For more information on using LNT to execute the ``test-suite``, please
+see the `LNT Quickstart <http://llvm.org/docs/lnt/quickstart.html>`_
+documentation.
+
+``test-suite`` Makefiles
+------------------------
+
+Historically, the ``test-suite`` was executed using a complicated setup
+of Makefiles. The LNT based approach above is recommended for most
+users, but there are some testing scenarios which are not supported by
+the LNT approach. In addition, LNT currently uses the Makefile setup
+under the covers and so developers who are interested in how LNT works
+under the hood may want to understand the Makefile based setup.
+
+For more information on the ``test-suite`` Makefile setup, please see
+the :doc:`Test Suite Makefile Guide <TestSuiteMakefileGuide>`.
Added: www-releases/trunk/3.6.1/docs/_sources/Vectorizers.txt
URL: http://llvm.org/viewvc/llvm-project/www-releases/trunk/3.6.1/docs/_sources/Vectorizers.txt?rev=238135&view=auto
==============================================================================
--- www-releases/trunk/3.6.1/docs/_sources/Vectorizers.txt (added)
+++ www-releases/trunk/3.6.1/docs/_sources/Vectorizers.txt Mon May 25 08:53:02 2015
@@ -0,0 +1,426 @@
+==========================
+Auto-Vectorization in LLVM
+==========================
+
+.. contents::
+ :local:
+
+LLVM has two vectorizers: The :ref:`Loop Vectorizer <loop-vectorizer>`,
+which operates on Loops, and the :ref:`SLP Vectorizer
+<slp-vectorizer>`. These vectorizers
+focus on different optimization opportunities and use different techniques.
+The SLP vectorizer merges multiple scalars that are found in the code into
+vectors while the Loop Vectorizer widens instructions in loops
+to operate on multiple consecutive iterations.
+
+Both the Loop Vectorizer and the SLP Vectorizer are enabled by default.
+
+.. _loop-vectorizer:
+
+The Loop Vectorizer
+===================
+
+Usage
+-----
+
+The Loop Vectorizer is enabled by default, but it can be disabled
+through clang using the command line flag:
+
+.. code-block:: console
+
+ $ clang ... -fno-vectorize file.c
+
+Command line flags
+^^^^^^^^^^^^^^^^^^
+
+The loop vectorizer uses a cost model to decide on the optimal vectorization factor
+and unroll factor. However, users of the vectorizer can force the vectorizer to use
+specific values. Both 'clang' and 'opt' support the flags below.
+
+Users can control the vectorization SIMD width using the command line flag "-force-vector-width".
+
+.. code-block:: console
+
+ $ clang -mllvm -force-vector-width=8 ...
+ $ opt -loop-vectorize -force-vector-width=8 ...
+
+Users can control the unroll factor using the command line flag "-force-vector-unroll"
+
+.. code-block:: console
+
+ $ clang -mllvm -force-vector-unroll=2 ...
+ $ opt -loop-vectorize -force-vector-unroll=2 ...
+
+Pragma loop hint directives
+^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The ``#pragma clang loop`` directive allows loop vectorization hints to be
+specified for the subsequent for, while, do-while, or c++11 range-based for
+loop. The directive allows vectorization and interleaving to be enabled or
+disabled. Vector width as well as interleave count can also be manually
+specified. The following example explicitly enables vectorization and
+interleaving:
+
+.. code-block:: c++
+
+ #pragma clang loop vectorize(enable) interleave(enable)
+ while(...) {
+ ...
+ }
+
+The following example implicitly enables vectorization and interleaving by
+specifying a vector width and interleaving count:
+
+.. code-block:: c++
+
+ #pragma clang loop vectorize_width(2) interleave_count(2)
+ for(...) {
+ ...
+ }
+
+See the Clang
+`language extensions
+<http://clang.llvm.org/docs/LanguageExtensions.html#extensions-for-loop-hint-optimizations>`_
+for details.
+
+Diagnostics
+-----------
+
+Many loops cannot be vectorized including loops with complicated control flow,
+unvectorizable types, and unvectorizable calls. The loop vectorizer generates
+optimization remarks which can be queried using command line options to identify
+and diagnose loops that are skipped by the loop-vectorizer.
+
+Optimization remarks are enabled using:
+
+``-Rpass=loop-vectorize`` identifies loops that were successfully vectorized.
+
+``-Rpass-missed=loop-vectorize`` identifies loops that failed vectorization and
+indicates if vectorization was specified.
+
+``-Rpass-analysis=loop-vectorize`` identifies the statements that caused
+vectorization to fail.
+
+Consider the following loop:
+
+.. code-block:: c++
+
+ #pragma clang loop vectorize(enable)
+ for (int i = 0; i < Length; i++) {
+ switch(A[i]) {
+ case 0: A[i] = i*2; break;
+ case 1: A[i] = i; break;
+ default: A[i] = 0;
+ }
+ }
+
+The command line ``-Rpass-missed=loop-vectorized`` prints the remark:
+
+.. code-block:: console
+
+ no_switch.cpp:4:5: remark: loop not vectorized: vectorization is explicitly enabled [-Rpass-missed=loop-vectorize]
+
+And the command line ``-Rpass-analysis=loop-vectorize`` indicates that the
+switch statement cannot be vectorized.
+
+.. code-block:: console
+
+ no_switch.cpp:4:5: remark: loop not vectorized: loop contains a switch statement [-Rpass-analysis=loop-vectorize]
+ switch(A[i]) {
+ ^
+
+To ensure line and column numbers are produced include the command line options
+``-gline-tables-only`` and ``-gcolumn-info``. See the Clang `user manual
+<http://clang.llvm.org/docs/UsersManual.html#options-to-emit-optimization-reports>`_
+for details
+
+Features
+--------
+
+The LLVM Loop Vectorizer has a number of features that allow it to vectorize
+complex loops.
+
+Loops with unknown trip count
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The Loop Vectorizer supports loops with an unknown trip count.
+In the loop below, the iteration ``start`` and ``finish`` points are unknown,
+and the Loop Vectorizer has a mechanism to vectorize loops that do not start
+at zero. In this example, 'n' may not be a multiple of the vector width, and
+the vectorizer has to execute the last few iterations as scalar code. Keeping
+a scalar copy of the loop increases the code size.
+
+.. code-block:: c++
+
+ void bar(float *A, float* B, float K, int start, int end) {
+ for (int i = start; i < end; ++i)
+ A[i] *= B[i] + K;
+ }
+
+Runtime Checks of Pointers
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+In the example below, if the pointers A and B point to consecutive addresses,
+then it is illegal to vectorize the code because some elements of A will be
+written before they are read from array B.
+
+Some programmers use the 'restrict' keyword to notify the compiler that the
+pointers are disjointed, but in our example, the Loop Vectorizer has no way of
+knowing that the pointers A and B are unique. The Loop Vectorizer handles this
+loop by placing code that checks, at runtime, if the arrays A and B point to
+disjointed memory locations. If arrays A and B overlap, then the scalar version
+of the loop is executed.
+
+.. code-block:: c++
+
+ void bar(float *A, float* B, float K, int n) {
+ for (int i = 0; i < n; ++i)
+ A[i] *= B[i] + K;
+ }
+
+
+Reductions
+^^^^^^^^^^
+
+In this example the ``sum`` variable is used by consecutive iterations of
+the loop. Normally, this would prevent vectorization, but the vectorizer can
+detect that 'sum' is a reduction variable. The variable 'sum' becomes a vector
+of integers, and at the end of the loop the elements of the array are added
+together to create the correct result. We support a number of different
+reduction operations, such as addition, multiplication, XOR, AND and OR.
+
+.. code-block:: c++
+
+ int foo(int *A, int *B, int n) {
+ unsigned sum = 0;
+ for (int i = 0; i < n; ++i)
+ sum += A[i] + 5;
+ return sum;
+ }
+
+We support floating point reduction operations when `-ffast-math` is used.
+
+Inductions
+^^^^^^^^^^
+
+In this example the value of the induction variable ``i`` is saved into an
+array. The Loop Vectorizer knows to vectorize induction variables.
+
+.. code-block:: c++
+
+ void bar(float *A, float* B, float K, int n) {
+ for (int i = 0; i < n; ++i)
+ A[i] = i;
+ }
+
+If Conversion
+^^^^^^^^^^^^^
+
+The Loop Vectorizer is able to "flatten" the IF statement in the code and
+generate a single stream of instructions. The Loop Vectorizer supports any
+control flow in the innermost loop. The innermost loop may contain complex
+nesting of IFs, ELSEs and even GOTOs.
+
+.. code-block:: c++
+
+ int foo(int *A, int *B, int n) {
+ unsigned sum = 0;
+ for (int i = 0; i < n; ++i)
+ if (A[i] > B[i])
+ sum += A[i] + 5;
+ return sum;
+ }
+
+Pointer Induction Variables
+^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+This example uses the "accumulate" function of the standard c++ library. This
+loop uses C++ iterators, which are pointers, and not integer indices.
+The Loop Vectorizer detects pointer induction variables and can vectorize
+this loop. This feature is important because many C++ programs use iterators.
+
+.. code-block:: c++
+
+ int baz(int *A, int n) {
+ return std::accumulate(A, A + n, 0);
+ }
+
+Reverse Iterators
+^^^^^^^^^^^^^^^^^
+
+The Loop Vectorizer can vectorize loops that count backwards.
+
+.. code-block:: c++
+
+ int foo(int *A, int *B, int n) {
+ for (int i = n; i > 0; --i)
+ A[i] +=1;
+ }
+
+Scatter / Gather
+^^^^^^^^^^^^^^^^
+
+The Loop Vectorizer can vectorize code that becomes a sequence of scalar instructions
+that scatter/gathers memory.
+
+.. code-block:: c++
+
+ int foo(int * A, int * B, int n) {
+ for (intptr_t i = 0; i < n; ++i)
+ A[i] += B[i * 4];
+ }
+
+In many situations the cost model will inform LLVM that this is not beneficial
+and LLVM will only vectorize such code if forced with "-mllvm -force-vector-width=#".
+
+Vectorization of Mixed Types
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The Loop Vectorizer can vectorize programs with mixed types. The Vectorizer
+cost model can estimate the cost of the type conversion and decide if
+vectorization is profitable.
+
+.. code-block:: c++
+
+ int foo(int *A, char *B, int n, int k) {
+ for (int i = 0; i < n; ++i)
+ A[i] += 4 * B[i];
+ }
+
+Global Structures Alias Analysis
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Access to global structures can also be vectorized, with alias analysis being
+used to make sure accesses don't alias. Run-time checks can also be added on
+pointer access to structure members.
+
+Many variations are supported, but some that rely on undefined behaviour being
+ignored (as other compilers do) are still being left un-vectorized.
+
+.. code-block:: c++
+
+ struct { int A[100], K, B[100]; } Foo;
+
+ int foo() {
+ for (int i = 0; i < 100; ++i)
+ Foo.A[i] = Foo.B[i] + 100;
+ }
+
+Vectorization of function calls
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The Loop Vectorize can vectorize intrinsic math functions.
+See the table below for a list of these functions.
+
++-----+-----+---------+
+| pow | exp | exp2 |
++-----+-----+---------+
+| sin | cos | sqrt |
++-----+-----+---------+
+| log |log2 | log10 |
++-----+-----+---------+
+|fabs |floor| ceil |
++-----+-----+---------+
+|fma |trunc|nearbyint|
++-----+-----+---------+
+| | | fmuladd |
++-----+-----+---------+
+
+The loop vectorizer knows about special instructions on the target and will
+vectorize a loop containing a function call that maps to the instructions. For
+example, the loop below will be vectorized on Intel x86 if the SSE4.1 roundps
+instruction is available.
+
+.. code-block:: c++
+
+ void foo(float *f) {
+ for (int i = 0; i != 1024; ++i)
+ f[i] = floorf(f[i]);
+ }
+
+Partial unrolling during vectorization
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Modern processors feature multiple execution units, and only programs that contain a
+high degree of parallelism can fully utilize the entire width of the machine.
+The Loop Vectorizer increases the instruction level parallelism (ILP) by
+performing partial-unrolling of loops.
+
+In the example below the entire array is accumulated into the variable 'sum'.
+This is inefficient because only a single execution port can be used by the processor.
+By unrolling the code the Loop Vectorizer allows two or more execution ports
+to be used simultaneously.
+
+.. code-block:: c++
+
+ int foo(int *A, int *B, int n) {
+ unsigned sum = 0;
+ for (int i = 0; i < n; ++i)
+ sum += A[i];
+ return sum;
+ }
+
+The Loop Vectorizer uses a cost model to decide when it is profitable to unroll loops.
+The decision to unroll the loop depends on the register pressure and the generated code size.
+
+Performance
+-----------
+
+This section shows the the execution time of Clang on a simple benchmark:
+`gcc-loops <http://llvm.org/viewvc/llvm-project/test-suite/trunk/SingleSource/UnitTests/Vectorizer/>`_.
+This benchmarks is a collection of loops from the GCC autovectorization
+`page <http://gcc.gnu.org/projects/tree-ssa/vectorization.html>`_ by Dorit Nuzman.
+
+The chart below compares GCC-4.7, ICC-13, and Clang-SVN with and without loop vectorization at -O3, tuned for "corei7-avx", running on a Sandybridge iMac.
+The Y-axis shows the time in msec. Lower is better. The last column shows the geomean of all the kernels.
+
+.. image:: gcc-loops.png
+
+And Linpack-pc with the same configuration. Result is Mflops, higher is better.
+
+.. image:: linpack-pc.png
+
+.. _slp-vectorizer:
+
+The SLP Vectorizer
+==================
+
+Details
+-------
+
+The goal of SLP vectorization (a.k.a. superword-level parallelism) is
+to combine similar independent instructions
+into vector instructions. Memory accesses, arithmetic operations, comparison
+operations, PHI-nodes, can all be vectorized using this technique.
+
+For example, the following function performs very similar operations on its
+inputs (a1, b1) and (a2, b2). The basic-block vectorizer may combine these
+into vector operations.
+
+.. code-block:: c++
+
+ void foo(int a1, int a2, int b1, int b2, int *A) {
+ A[0] = a1*(a1 + b1)/b1 + 50*b1/a1;
+ A[1] = a2*(a2 + b2)/b2 + 50*b2/a2;
+ }
+
+The SLP-vectorizer processes the code bottom-up, across basic blocks, in search of scalars to combine.
+
+Usage
+------
+
+The SLP Vectorizer is enabled by default, but it can be disabled
+through clang using the command line flag:
+
+.. code-block:: console
+
+ $ clang -fno-slp-vectorize file.c
+
+LLVM has a second basic block vectorization phase
+which is more compile-time intensive (The BB vectorizer). This optimization
+can be enabled through clang using the command line flag:
+
+.. code-block:: console
+
+ $ clang -fslp-vectorize-aggressive file.c
+
Added: www-releases/trunk/3.6.1/docs/_sources/WritingAnLLVMBackend.txt
URL: http://llvm.org/viewvc/llvm-project/www-releases/trunk/3.6.1/docs/_sources/WritingAnLLVMBackend.txt?rev=238135&view=auto
==============================================================================
--- www-releases/trunk/3.6.1/docs/_sources/WritingAnLLVMBackend.txt (added)
+++ www-releases/trunk/3.6.1/docs/_sources/WritingAnLLVMBackend.txt Mon May 25 08:53:02 2015
@@ -0,0 +1,1941 @@
+=======================
+Writing an LLVM Backend
+=======================
+
+.. toctree::
+ :hidden:
+
+ HowToUseInstrMappings
+
+.. contents::
+ :local:
+
+Introduction
+============
+
+This document describes techniques for writing compiler backends that convert
+the LLVM Intermediate Representation (IR) to code for a specified machine or
+other languages. Code intended for a specific machine can take the form of
+either assembly code or binary code (usable for a JIT compiler).
+
+The backend of LLVM features a target-independent code generator that may
+create output for several types of target CPUs --- including X86, PowerPC,
+ARM, and SPARC. The backend may also be used to generate code targeted at SPUs
+of the Cell processor or GPUs to support the execution of compute kernels.
+
+The document focuses on existing examples found in subdirectories of
+``llvm/lib/Target`` in a downloaded LLVM release. In particular, this document
+focuses on the example of creating a static compiler (one that emits text
+assembly) for a SPARC target, because SPARC has fairly standard
+characteristics, such as a RISC instruction set and straightforward calling
+conventions.
+
+Audience
+--------
+
+The audience for this document is anyone who needs to write an LLVM backend to
+generate code for a specific hardware or software target.
+
+Prerequisite Reading
+--------------------
+
+These essential documents must be read before reading this document:
+
+* `LLVM Language Reference Manual <LangRef.html>`_ --- a reference manual for
+ the LLVM assembly language.
+
+* :doc:`CodeGenerator` --- a guide to the components (classes and code
+ generation algorithms) for translating the LLVM internal representation into
+ machine code for a specified target. Pay particular attention to the
+ descriptions of code generation stages: Instruction Selection, Scheduling and
+ Formation, SSA-based Optimization, Register Allocation, Prolog/Epilog Code
+ Insertion, Late Machine Code Optimizations, and Code Emission.
+
+* :doc:`TableGen/index` --- a document that describes the TableGen
+ (``tblgen``) application that manages domain-specific information to support
+ LLVM code generation. TableGen processes input from a target description
+ file (``.td`` suffix) and generates C++ code that can be used for code
+ generation.
+
+* :doc:`WritingAnLLVMPass` --- The assembly printer is a ``FunctionPass``, as
+ are several ``SelectionDAG`` processing steps.
+
+To follow the SPARC examples in this document, have a copy of `The SPARC
+Architecture Manual, Version 8 <http://www.sparc.org/standards/V8.pdf>`_ for
+reference. For details about the ARM instruction set, refer to the `ARM
+Architecture Reference Manual <http://infocenter.arm.com/>`_. For more about
+the GNU Assembler format (``GAS``), see `Using As
+<http://sourceware.org/binutils/docs/as/index.html>`_, especially for the
+assembly printer. "Using As" contains a list of target machine dependent
+features.
+
+Basic Steps
+-----------
+
+To write a compiler backend for LLVM that converts the LLVM IR to code for a
+specified target (machine or other language), follow these steps:
+
+* Create a subclass of the ``TargetMachine`` class that describes
+ characteristics of your target machine. Copy existing examples of specific
+ ``TargetMachine`` class and header files; for example, start with
+ ``SparcTargetMachine.cpp`` and ``SparcTargetMachine.h``, but change the file
+ names for your target. Similarly, change code that references "``Sparc``" to
+ reference your target.
+
+* Describe the register set of the target. Use TableGen to generate code for
+ register definition, register aliases, and register classes from a
+ target-specific ``RegisterInfo.td`` input file. You should also write
+ additional code for a subclass of the ``TargetRegisterInfo`` class that
+ represents the class register file data used for register allocation and also
+ describes the interactions between registers.
+
+* Describe the instruction set of the target. Use TableGen to generate code
+ for target-specific instructions from target-specific versions of
+ ``TargetInstrFormats.td`` and ``TargetInstrInfo.td``. You should write
+ additional code for a subclass of the ``TargetInstrInfo`` class to represent
+ machine instructions supported by the target machine.
+
+* Describe the selection and conversion of the LLVM IR from a Directed Acyclic
+ Graph (DAG) representation of instructions to native target-specific
+ instructions. Use TableGen to generate code that matches patterns and
+ selects instructions based on additional information in a target-specific
+ version of ``TargetInstrInfo.td``. Write code for ``XXXISelDAGToDAG.cpp``,
+ where ``XXX`` identifies the specific target, to perform pattern matching and
+ DAG-to-DAG instruction selection. Also write code in ``XXXISelLowering.cpp``
+ to replace or remove operations and data types that are not supported
+ natively in a SelectionDAG.
+
+* Write code for an assembly printer that converts LLVM IR to a GAS format for
+ your target machine. You should add assembly strings to the instructions
+ defined in your target-specific version of ``TargetInstrInfo.td``. You
+ should also write code for a subclass of ``AsmPrinter`` that performs the
+ LLVM-to-assembly conversion and a trivial subclass of ``TargetAsmInfo``.
+
+* Optionally, add support for subtargets (i.e., variants with different
+ capabilities). You should also write code for a subclass of the
+ ``TargetSubtarget`` class, which allows you to use the ``-mcpu=`` and
+ ``-mattr=`` command-line options.
+
+* Optionally, add JIT support and create a machine code emitter (subclass of
+ ``TargetJITInfo``) that is used to emit binary code directly into memory.
+
+In the ``.cpp`` and ``.h``. files, initially stub up these methods and then
+implement them later. Initially, you may not know which private members that
+the class will need and which components will need to be subclassed.
+
+Preliminaries
+-------------
+
+To actually create your compiler backend, you need to create and modify a few
+files. The absolute minimum is discussed here. But to actually use the LLVM
+target-independent code generator, you must perform the steps described in the
+:doc:`LLVM Target-Independent Code Generator <CodeGenerator>` document.
+
+First, you should create a subdirectory under ``lib/Target`` to hold all the
+files related to your target. If your target is called "Dummy", create the
+directory ``lib/Target/Dummy``.
+
+In this new directory, create a ``Makefile``. It is easiest to copy a
+``Makefile`` of another target and modify it. It should at least contain the
+``LEVEL``, ``LIBRARYNAME`` and ``TARGET`` variables, and then include
+``$(LEVEL)/Makefile.common``. The library can be named ``LLVMDummy`` (for
+example, see the MIPS target). Alternatively, you can split the library into
+``LLVMDummyCodeGen`` and ``LLVMDummyAsmPrinter``, the latter of which should be
+implemented in a subdirectory below ``lib/Target/Dummy`` (for example, see the
+PowerPC target).
+
+Note that these two naming schemes are hardcoded into ``llvm-config``. Using
+any other naming scheme will confuse ``llvm-config`` and produce a lot of
+(seemingly unrelated) linker errors when linking ``llc``.
+
+To make your target actually do something, you need to implement a subclass of
+``TargetMachine``. This implementation should typically be in the file
+``lib/Target/DummyTargetMachine.cpp``, but any file in the ``lib/Target``
+directory will be built and should work. To use LLVM's target independent code
+generator, you should do what all current machine backends do: create a
+subclass of ``LLVMTargetMachine``. (To create a target from scratch, create a
+subclass of ``TargetMachine``.)
+
+To get LLVM to actually build and link your target, you need to add it to the
+``TARGETS_TO_BUILD`` variable. To do this, you modify the configure script to
+know about your target when parsing the ``--enable-targets`` option. Search
+the configure script for ``TARGETS_TO_BUILD``, add your target to the lists
+there (some creativity required), and then reconfigure. Alternatively, you can
+change ``autoconf/configure.ac`` and regenerate configure by running
+``./autoconf/AutoRegen.sh``.
+
+Target Machine
+==============
+
+``LLVMTargetMachine`` is designed as a base class for targets implemented with
+the LLVM target-independent code generator. The ``LLVMTargetMachine`` class
+should be specialized by a concrete target class that implements the various
+virtual methods. ``LLVMTargetMachine`` is defined as a subclass of
+``TargetMachine`` in ``include/llvm/Target/TargetMachine.h``. The
+``TargetMachine`` class implementation (``TargetMachine.cpp``) also processes
+numerous command-line options.
+
+To create a concrete target-specific subclass of ``LLVMTargetMachine``, start
+by copying an existing ``TargetMachine`` class and header. You should name the
+files that you create to reflect your specific target. For instance, for the
+SPARC target, name the files ``SparcTargetMachine.h`` and
+``SparcTargetMachine.cpp``.
+
+For a target machine ``XXX``, the implementation of ``XXXTargetMachine`` must
+have access methods to obtain objects that represent target components. These
+methods are named ``get*Info``, and are intended to obtain the instruction set
+(``getInstrInfo``), register set (``getRegisterInfo``), stack frame layout
+(``getFrameInfo``), and similar information. ``XXXTargetMachine`` must also
+implement the ``getDataLayout`` method to access an object with target-specific
+data characteristics, such as data type size and alignment requirements.
+
+For instance, for the SPARC target, the header file ``SparcTargetMachine.h``
+declares prototypes for several ``get*Info`` and ``getDataLayout`` methods that
+simply return a class member.
+
+.. code-block:: c++
+
+ namespace llvm {
+
+ class Module;
+
+ class SparcTargetMachine : public LLVMTargetMachine {
+ const DataLayout DataLayout; // Calculates type size & alignment
+ SparcSubtarget Subtarget;
+ SparcInstrInfo InstrInfo;
+ TargetFrameInfo FrameInfo;
+
+ protected:
+ virtual const TargetAsmInfo *createTargetAsmInfo() const;
+
+ public:
+ SparcTargetMachine(const Module &M, const std::string &FS);
+
+ virtual const SparcInstrInfo *getInstrInfo() const {return &InstrInfo; }
+ virtual const TargetFrameInfo *getFrameInfo() const {return &FrameInfo; }
+ virtual const TargetSubtarget *getSubtargetImpl() const{return &Subtarget; }
+ virtual const TargetRegisterInfo *getRegisterInfo() const {
+ return &InstrInfo.getRegisterInfo();
+ }
+ virtual const DataLayout *getDataLayout() const { return &DataLayout; }
+ static unsigned getModuleMatchQuality(const Module &M);
+
+ // Pass Pipeline Configuration
+ virtual bool addInstSelector(PassManagerBase &PM, bool Fast);
+ virtual bool addPreEmitPass(PassManagerBase &PM, bool Fast);
+ };
+
+ } // end namespace llvm
+
+* ``getInstrInfo()``
+* ``getRegisterInfo()``
+* ``getFrameInfo()``
+* ``getDataLayout()``
+* ``getSubtargetImpl()``
+
+For some targets, you also need to support the following methods:
+
+* ``getTargetLowering()``
+* ``getJITInfo()``
+
+Some architectures, such as GPUs, do not support jumping to an arbitrary
+program location and implement branching using masked execution and loop using
+special instructions around the loop body. In order to avoid CFG modifications
+that introduce irreducible control flow not handled by such hardware, a target
+must call `setRequiresStructuredCFG(true)` when being initialized.
+
+In addition, the ``XXXTargetMachine`` constructor should specify a
+``TargetDescription`` string that determines the data layout for the target
+machine, including characteristics such as pointer size, alignment, and
+endianness. For example, the constructor for ``SparcTargetMachine`` contains
+the following:
+
+.. code-block:: c++
+
+ SparcTargetMachine::SparcTargetMachine(const Module &M, const std::string &FS)
+ : DataLayout("E-p:32:32-f128:128:128"),
+ Subtarget(M, FS), InstrInfo(Subtarget),
+ FrameInfo(TargetFrameInfo::StackGrowsDown, 8, 0) {
+ }
+
+Hyphens separate portions of the ``TargetDescription`` string.
+
+* An upper-case "``E``" in the string indicates a big-endian target data model.
+ A lower-case "``e``" indicates little-endian.
+
+* "``p:``" is followed by pointer information: size, ABI alignment, and
+ preferred alignment. If only two figures follow "``p:``", then the first
+ value is pointer size, and the second value is both ABI and preferred
+ alignment.
+
+* Then a letter for numeric type alignment: "``i``", "``f``", "``v``", or
+ "``a``" (corresponding to integer, floating point, vector, or aggregate).
+ "``i``", "``v``", or "``a``" are followed by ABI alignment and preferred
+ alignment. "``f``" is followed by three values: the first indicates the size
+ of a long double, then ABI alignment, and then ABI preferred alignment.
+
+Target Registration
+===================
+
+You must also register your target with the ``TargetRegistry``, which is what
+other LLVM tools use to be able to lookup and use your target at runtime. The
+``TargetRegistry`` can be used directly, but for most targets there are helper
+templates which should take care of the work for you.
+
+All targets should declare a global ``Target`` object which is used to
+represent the target during registration. Then, in the target's ``TargetInfo``
+library, the target should define that object and use the ``RegisterTarget``
+template to register the target. For example, the Sparc registration code
+looks like this:
+
+.. code-block:: c++
+
+ Target llvm::TheSparcTarget;
+
+ extern "C" void LLVMInitializeSparcTargetInfo() {
+ RegisterTarget<Triple::sparc, /*HasJIT=*/false>
+ X(TheSparcTarget, "sparc", "Sparc");
+ }
+
+This allows the ``TargetRegistry`` to look up the target by name or by target
+triple. In addition, most targets will also register additional features which
+are available in separate libraries. These registration steps are separate,
+because some clients may wish to only link in some parts of the target --- the
+JIT code generator does not require the use of the assembler printer, for
+example. Here is an example of registering the Sparc assembly printer:
+
+.. code-block:: c++
+
+ extern "C" void LLVMInitializeSparcAsmPrinter() {
+ RegisterAsmPrinter<SparcAsmPrinter> X(TheSparcTarget);
+ }
+
+For more information, see "`llvm/Target/TargetRegistry.h
+</doxygen/TargetRegistry_8h-source.html>`_".
+
+Register Set and Register Classes
+=================================
+
+You should describe a concrete target-specific class that represents the
+register file of a target machine. This class is called ``XXXRegisterInfo``
+(where ``XXX`` identifies the target) and represents the class register file
+data that is used for register allocation. It also describes the interactions
+between registers.
+
+You also need to define register classes to categorize related registers. A
+register class should be added for groups of registers that are all treated the
+same way for some instruction. Typical examples are register classes for
+integer, floating-point, or vector registers. A register allocator allows an
+instruction to use any register in a specified register class to perform the
+instruction in a similar manner. Register classes allocate virtual registers
+to instructions from these sets, and register classes let the
+target-independent register allocator automatically choose the actual
+registers.
+
+Much of the code for registers, including register definition, register
+aliases, and register classes, is generated by TableGen from
+``XXXRegisterInfo.td`` input files and placed in ``XXXGenRegisterInfo.h.inc``
+and ``XXXGenRegisterInfo.inc`` output files. Some of the code in the
+implementation of ``XXXRegisterInfo`` requires hand-coding.
+
+Defining a Register
+-------------------
+
+The ``XXXRegisterInfo.td`` file typically starts with register definitions for
+a target machine. The ``Register`` class (specified in ``Target.td``) is used
+to define an object for each register. The specified string ``n`` becomes the
+``Name`` of the register. The basic ``Register`` object does not have any
+subregisters and does not specify any aliases.
+
+.. code-block:: llvm
+
+ class Register<string n> {
+ string Namespace = "";
+ string AsmName = n;
+ string Name = n;
+ int SpillSize = 0;
+ int SpillAlignment = 0;
+ list<Register> Aliases = [];
+ list<Register> SubRegs = [];
+ list<int> DwarfNumbers = [];
+ }
+
+For example, in the ``X86RegisterInfo.td`` file, there are register definitions
+that utilize the ``Register`` class, such as:
+
+.. code-block:: llvm
+
+ def AL : Register<"AL">, DwarfRegNum<[0, 0, 0]>;
+
+This defines the register ``AL`` and assigns it values (with ``DwarfRegNum``)
+that are used by ``gcc``, ``gdb``, or a debug information writer to identify a
+register. For register ``AL``, ``DwarfRegNum`` takes an array of 3 values
+representing 3 different modes: the first element is for X86-64, the second for
+exception handling (EH) on X86-32, and the third is generic. -1 is a special
+Dwarf number that indicates the gcc number is undefined, and -2 indicates the
+register number is invalid for this mode.
+
+From the previously described line in the ``X86RegisterInfo.td`` file, TableGen
+generates this code in the ``X86GenRegisterInfo.inc`` file:
+
+.. code-block:: c++
+
+ static const unsigned GR8[] = { X86::AL, ... };
+
+ const unsigned AL_AliasSet[] = { X86::AX, X86::EAX, X86::RAX, 0 };
+
+ const TargetRegisterDesc RegisterDescriptors[] = {
+ ...
+ { "AL", "AL", AL_AliasSet, Empty_SubRegsSet, Empty_SubRegsSet, AL_SuperRegsSet }, ...
+
+From the register info file, TableGen generates a ``TargetRegisterDesc`` object
+for each register. ``TargetRegisterDesc`` is defined in
+``include/llvm/Target/TargetRegisterInfo.h`` with the following fields:
+
+.. code-block:: c++
+
+ struct TargetRegisterDesc {
+ const char *AsmName; // Assembly language name for the register
+ const char *Name; // Printable name for the reg (for debugging)
+ const unsigned *AliasSet; // Register Alias Set
+ const unsigned *SubRegs; // Sub-register set
+ const unsigned *ImmSubRegs; // Immediate sub-register set
+ const unsigned *SuperRegs; // Super-register set
+ };
+
+TableGen uses the entire target description file (``.td``) to determine text
+names for the register (in the ``AsmName`` and ``Name`` fields of
+``TargetRegisterDesc``) and the relationships of other registers to the defined
+register (in the other ``TargetRegisterDesc`` fields). In this example, other
+definitions establish the registers "``AX``", "``EAX``", and "``RAX``" as
+aliases for one another, so TableGen generates a null-terminated array
+(``AL_AliasSet``) for this register alias set.
+
+The ``Register`` class is commonly used as a base class for more complex
+classes. In ``Target.td``, the ``Register`` class is the base for the
+``RegisterWithSubRegs`` class that is used to define registers that need to
+specify subregisters in the ``SubRegs`` list, as shown here:
+
+.. code-block:: llvm
+
+ class RegisterWithSubRegs<string n, list<Register> subregs> : Register<n> {
+ let SubRegs = subregs;
+ }
+
+In ``SparcRegisterInfo.td``, additional register classes are defined for SPARC:
+a ``Register`` subclass, ``SparcReg``, and further subclasses: ``Ri``, ``Rf``,
+and ``Rd``. SPARC registers are identified by 5-bit ID numbers, which is a
+feature common to these subclasses. Note the use of "``let``" expressions to
+override values that are initially defined in a superclass (such as ``SubRegs``
+field in the ``Rd`` class).
+
+.. code-block:: llvm
+
+ class SparcReg<string n> : Register<n> {
+ field bits<5> Num;
+ let Namespace = "SP";
+ }
+ // Ri - 32-bit integer registers
+ class Ri<bits<5> num, string n> :
+ SparcReg<n> {
+ let Num = num;
+ }
+ // Rf - 32-bit floating-point registers
+ class Rf<bits<5> num, string n> :
+ SparcReg<n> {
+ let Num = num;
+ }
+ // Rd - Slots in the FP register file for 64-bit floating-point values.
+ class Rd<bits<5> num, string n, list<Register> subregs> : SparcReg<n> {
+ let Num = num;
+ let SubRegs = subregs;
+ }
+
+In the ``SparcRegisterInfo.td`` file, there are register definitions that
+utilize these subclasses of ``Register``, such as:
+
+.. code-block:: llvm
+
+ def G0 : Ri< 0, "G0">, DwarfRegNum<[0]>;
+ def G1 : Ri< 1, "G1">, DwarfRegNum<[1]>;
+ ...
+ def F0 : Rf< 0, "F0">, DwarfRegNum<[32]>;
+ def F1 : Rf< 1, "F1">, DwarfRegNum<[33]>;
+ ...
+ def D0 : Rd< 0, "F0", [F0, F1]>, DwarfRegNum<[32]>;
+ def D1 : Rd< 2, "F2", [F2, F3]>, DwarfRegNum<[34]>;
+
+The last two registers shown above (``D0`` and ``D1``) are double-precision
+floating-point registers that are aliases for pairs of single-precision
+floating-point sub-registers. In addition to aliases, the sub-register and
+super-register relationships of the defined register are in fields of a
+register's ``TargetRegisterDesc``.
+
+Defining a Register Class
+-------------------------
+
+The ``RegisterClass`` class (specified in ``Target.td``) is used to define an
+object that represents a group of related registers and also defines the
+default allocation order of the registers. A target description file
+``XXXRegisterInfo.td`` that uses ``Target.td`` can construct register classes
+using the following class:
+
+.. code-block:: llvm
+
+ class RegisterClass<string namespace,
+ list<ValueType> regTypes, int alignment, dag regList> {
+ string Namespace = namespace;
+ list<ValueType> RegTypes = regTypes;
+ int Size = 0; // spill size, in bits; zero lets tblgen pick the size
+ int Alignment = alignment;
+
+ // CopyCost is the cost of copying a value between two registers
+ // default value 1 means a single instruction
+ // A negative value means copying is extremely expensive or impossible
+ int CopyCost = 1;
+ dag MemberList = regList;
+
+ // for register classes that are subregisters of this class
+ list<RegisterClass> SubRegClassList = [];
+
+ code MethodProtos = [{}]; // to insert arbitrary code
+ code MethodBodies = [{}];
+ }
+
+To define a ``RegisterClass``, use the following 4 arguments:
+
+* The first argument of the definition is the name of the namespace.
+
+* The second argument is a list of ``ValueType`` register type values that are
+ defined in ``include/llvm/CodeGen/ValueTypes.td``. Defined values include
+ integer types (such as ``i16``, ``i32``, and ``i1`` for Boolean),
+ floating-point types (``f32``, ``f64``), and vector types (for example,
+ ``v8i16`` for an ``8 x i16`` vector). All registers in a ``RegisterClass``
+ must have the same ``ValueType``, but some registers may store vector data in
+ different configurations. For example a register that can process a 128-bit
+ vector may be able to handle 16 8-bit integer elements, 8 16-bit integers, 4
+ 32-bit integers, and so on.
+
+* The third argument of the ``RegisterClass`` definition specifies the
+ alignment required of the registers when they are stored or loaded to
+ memory.
+
+* The final argument, ``regList``, specifies which registers are in this class.
+ If an alternative allocation order method is not specified, then ``regList``
+ also defines the order of allocation used by the register allocator. Besides
+ simply listing registers with ``(add R0, R1, ...)``, more advanced set
+ operators are available. See ``include/llvm/Target/Target.td`` for more
+ information.
+
+In ``SparcRegisterInfo.td``, three ``RegisterClass`` objects are defined:
+``FPRegs``, ``DFPRegs``, and ``IntRegs``. For all three register classes, the
+first argument defines the namespace with the string "``SP``". ``FPRegs``
+defines a group of 32 single-precision floating-point registers (``F0`` to
+``F31``); ``DFPRegs`` defines a group of 16 double-precision registers
+(``D0-D15``).
+
+.. code-block:: llvm
+
+ // F0, F1, F2, ..., F31
+ def FPRegs : RegisterClass<"SP", [f32], 32, (sequence "F%u", 0, 31)>;
+
+ def DFPRegs : RegisterClass<"SP", [f64], 64,
+ (add D0, D1, D2, D3, D4, D5, D6, D7, D8,
+ D9, D10, D11, D12, D13, D14, D15)>;
+
+ def IntRegs : RegisterClass<"SP", [i32], 32,
+ (add L0, L1, L2, L3, L4, L5, L6, L7,
+ I0, I1, I2, I3, I4, I5,
+ O0, O1, O2, O3, O4, O5, O7,
+ G1,
+ // Non-allocatable regs:
+ G2, G3, G4,
+ O6, // stack ptr
+ I6, // frame ptr
+ I7, // return address
+ G0, // constant zero
+ G5, G6, G7 // reserved for kernel
+ )>;
+
+Using ``SparcRegisterInfo.td`` with TableGen generates several output files
+that are intended for inclusion in other source code that you write.
+``SparcRegisterInfo.td`` generates ``SparcGenRegisterInfo.h.inc``, which should
+be included in the header file for the implementation of the SPARC register
+implementation that you write (``SparcRegisterInfo.h``). In
+``SparcGenRegisterInfo.h.inc`` a new structure is defined called
+``SparcGenRegisterInfo`` that uses ``TargetRegisterInfo`` as its base. It also
+specifies types, based upon the defined register classes: ``DFPRegsClass``,
+``FPRegsClass``, and ``IntRegsClass``.
+
+``SparcRegisterInfo.td`` also generates ``SparcGenRegisterInfo.inc``, which is
+included at the bottom of ``SparcRegisterInfo.cpp``, the SPARC register
+implementation. The code below shows only the generated integer registers and
+associated register classes. The order of registers in ``IntRegs`` reflects
+the order in the definition of ``IntRegs`` in the target description file.
+
+.. code-block:: c++
+
+ // IntRegs Register Class...
+ static const unsigned IntRegs[] = {
+ SP::L0, SP::L1, SP::L2, SP::L3, SP::L4, SP::L5,
+ SP::L6, SP::L7, SP::I0, SP::I1, SP::I2, SP::I3,
+ SP::I4, SP::I5, SP::O0, SP::O1, SP::O2, SP::O3,
+ SP::O4, SP::O5, SP::O7, SP::G1, SP::G2, SP::G3,
+ SP::G4, SP::O6, SP::I6, SP::I7, SP::G0, SP::G5,
+ SP::G6, SP::G7,
+ };
+
+ // IntRegsVTs Register Class Value Types...
+ static const MVT::ValueType IntRegsVTs[] = {
+ MVT::i32, MVT::Other
+ };
+
+ namespace SP { // Register class instances
+ DFPRegsClass DFPRegsRegClass;
+ FPRegsClass FPRegsRegClass;
+ IntRegsClass IntRegsRegClass;
+ ...
+ // IntRegs Sub-register Classess...
+ static const TargetRegisterClass* const IntRegsSubRegClasses [] = {
+ NULL
+ };
+ ...
+ // IntRegs Super-register Classess...
+ static const TargetRegisterClass* const IntRegsSuperRegClasses [] = {
+ NULL
+ };
+ ...
+ // IntRegs Register Class sub-classes...
+ static const TargetRegisterClass* const IntRegsSubclasses [] = {
+ NULL
+ };
+ ...
+ // IntRegs Register Class super-classes...
+ static const TargetRegisterClass* const IntRegsSuperclasses [] = {
+ NULL
+ };
+
+ IntRegsClass::IntRegsClass() : TargetRegisterClass(IntRegsRegClassID,
+ IntRegsVTs, IntRegsSubclasses, IntRegsSuperclasses, IntRegsSubRegClasses,
+ IntRegsSuperRegClasses, 4, 4, 1, IntRegs, IntRegs + 32) {}
+ }
+
+The register allocators will avoid using reserved registers, and callee saved
+registers are not used until all the volatile registers have been used. That
+is usually good enough, but in some cases it may be necessary to provide custom
+allocation orders.
+
+Implement a subclass of ``TargetRegisterInfo``
+----------------------------------------------
+
+The final step is to hand code portions of ``XXXRegisterInfo``, which
+implements the interface described in ``TargetRegisterInfo.h`` (see
+:ref:`TargetRegisterInfo`). These functions return ``0``, ``NULL``, or
+``false``, unless overridden. Here is a list of functions that are overridden
+for the SPARC implementation in ``SparcRegisterInfo.cpp``:
+
+* ``getCalleeSavedRegs`` --- Returns a list of callee-saved registers in the
+ order of the desired callee-save stack frame offset.
+
+* ``getReservedRegs`` --- Returns a bitset indexed by physical register
+ numbers, indicating if a particular register is unavailable.
+
+* ``hasFP`` --- Return a Boolean indicating if a function should have a
+ dedicated frame pointer register.
+
+* ``eliminateCallFramePseudoInstr`` --- If call frame setup or destroy pseudo
+ instructions are used, this can be called to eliminate them.
+
+* ``eliminateFrameIndex`` --- Eliminate abstract frame indices from
+ instructions that may use them.
+
+* ``emitPrologue`` --- Insert prologue code into the function.
+
+* ``emitEpilogue`` --- Insert epilogue code into the function.
+
+.. _instruction-set:
+
+Instruction Set
+===============
+
+During the early stages of code generation, the LLVM IR code is converted to a
+``SelectionDAG`` with nodes that are instances of the ``SDNode`` class
+containing target instructions. An ``SDNode`` has an opcode, operands, type
+requirements, and operation properties. For example, is an operation
+commutative, does an operation load from memory. The various operation node
+types are described in the ``include/llvm/CodeGen/SelectionDAGNodes.h`` file
+(values of the ``NodeType`` enum in the ``ISD`` namespace).
+
+TableGen uses the following target description (``.td``) input files to
+generate much of the code for instruction definition:
+
+* ``Target.td`` --- Where the ``Instruction``, ``Operand``, ``InstrInfo``, and
+ other fundamental classes are defined.
+
+* ``TargetSelectionDAG.td`` --- Used by ``SelectionDAG`` instruction selection
+ generators, contains ``SDTC*`` classes (selection DAG type constraint),
+ definitions of ``SelectionDAG`` nodes (such as ``imm``, ``cond``, ``bb``,
+ ``add``, ``fadd``, ``sub``), and pattern support (``Pattern``, ``Pat``,
+ ``PatFrag``, ``PatLeaf``, ``ComplexPattern``.
+
+* ``XXXInstrFormats.td`` --- Patterns for definitions of target-specific
+ instructions.
+
+* ``XXXInstrInfo.td`` --- Target-specific definitions of instruction templates,
+ condition codes, and instructions of an instruction set. For architecture
+ modifications, a different file name may be used. For example, for Pentium
+ with SSE instruction, this file is ``X86InstrSSE.td``, and for Pentium with
+ MMX, this file is ``X86InstrMMX.td``.
+
+There is also a target-specific ``XXX.td`` file, where ``XXX`` is the name of
+the target. The ``XXX.td`` file includes the other ``.td`` input files, but
+its contents are only directly important for subtargets.
+
+You should describe a concrete target-specific class ``XXXInstrInfo`` that
+represents machine instructions supported by a target machine.
+``XXXInstrInfo`` contains an array of ``XXXInstrDescriptor`` objects, each of
+which describes one instruction. An instruction descriptor defines:
+
+* Opcode mnemonic
+* Number of operands
+* List of implicit register definitions and uses
+* Target-independent properties (such as memory access, is commutable)
+* Target-specific flags
+
+The Instruction class (defined in ``Target.td``) is mostly used as a base for
+more complex instruction classes.
+
+.. code-block:: llvm
+
+ class Instruction {
+ string Namespace = "";
+ dag OutOperandList; // A dag containing the MI def operand list.
+ dag InOperandList; // A dag containing the MI use operand list.
+ string AsmString = ""; // The .s format to print the instruction with.
+ list<dag> Pattern; // Set to the DAG pattern for this instruction.
+ list<Register> Uses = [];
+ list<Register> Defs = [];
+ list<Predicate> Predicates = []; // predicates turned into isel match code
+ ... remainder not shown for space ...
+ }
+
+A ``SelectionDAG`` node (``SDNode``) should contain an object representing a
+target-specific instruction that is defined in ``XXXInstrInfo.td``. The
+instruction objects should represent instructions from the architecture manual
+of the target machine (such as the SPARC Architecture Manual for the SPARC
+target).
+
+A single instruction from the architecture manual is often modeled as multiple
+target instructions, depending upon its operands. For example, a manual might
+describe an add instruction that takes a register or an immediate operand. An
+LLVM target could model this with two instructions named ``ADDri`` and
+``ADDrr``.
+
+You should define a class for each instruction category and define each opcode
+as a subclass of the category with appropriate parameters such as the fixed
+binary encoding of opcodes and extended opcodes. You should map the register
+bits to the bits of the instruction in which they are encoded (for the JIT).
+Also you should specify how the instruction should be printed when the
+automatic assembly printer is used.
+
+As is described in the SPARC Architecture Manual, Version 8, there are three
+major 32-bit formats for instructions. Format 1 is only for the ``CALL``
+instruction. Format 2 is for branch on condition codes and ``SETHI`` (set high
+bits of a register) instructions. Format 3 is for other instructions.
+
+Each of these formats has corresponding classes in ``SparcInstrFormat.td``.
+``InstSP`` is a base class for other instruction classes. Additional base
+classes are specified for more precise formats: for example in
+``SparcInstrFormat.td``, ``F2_1`` is for ``SETHI``, and ``F2_2`` is for
+branches. There are three other base classes: ``F3_1`` for register/register
+operations, ``F3_2`` for register/immediate operations, and ``F3_3`` for
+floating-point operations. ``SparcInstrInfo.td`` also adds the base class
+``Pseudo`` for synthetic SPARC instructions.
+
+``SparcInstrInfo.td`` largely consists of operand and instruction definitions
+for the SPARC target. In ``SparcInstrInfo.td``, the following target
+description file entry, ``LDrr``, defines the Load Integer instruction for a
+Word (the ``LD`` SPARC opcode) from a memory address to a register. The first
+parameter, the value 3 (``11``\ :sub:`2`), is the operation value for this
+category of operation. The second parameter (``000000``\ :sub:`2`) is the
+specific operation value for ``LD``/Load Word. The third parameter is the
+output destination, which is a register operand and defined in the ``Register``
+target description file (``IntRegs``).
+
+.. code-block:: llvm
+
+ def LDrr : F3_1 <3, 0b000000, (outs IntRegs:$dst), (ins MEMrr:$addr),
+ "ld [$addr], $dst",
+ [(set i32:$dst, (load ADDRrr:$addr))]>;
+
+The fourth parameter is the input source, which uses the address operand
+``MEMrr`` that is defined earlier in ``SparcInstrInfo.td``:
+
+.. code-block:: llvm
+
+ def MEMrr : Operand<i32> {
+ let PrintMethod = "printMemOperand";
+ let MIOperandInfo = (ops IntRegs, IntRegs);
+ }
+
+The fifth parameter is a string that is used by the assembly printer and can be
+left as an empty string until the assembly printer interface is implemented.
+The sixth and final parameter is the pattern used to match the instruction
+during the SelectionDAG Select Phase described in :doc:`CodeGenerator`.
+This parameter is detailed in the next section, :ref:`instruction-selector`.
+
+Instruction class definitions are not overloaded for different operand types,
+so separate versions of instructions are needed for register, memory, or
+immediate value operands. For example, to perform a Load Integer instruction
+for a Word from an immediate operand to a register, the following instruction
+class is defined:
+
+.. code-block:: llvm
+
+ def LDri : F3_2 <3, 0b000000, (outs IntRegs:$dst), (ins MEMri:$addr),
+ "ld [$addr], $dst",
+ [(set i32:$dst, (load ADDRri:$addr))]>;
+
+Writing these definitions for so many similar instructions can involve a lot of
+cut and paste. In ``.td`` files, the ``multiclass`` directive enables the
+creation of templates to define several instruction classes at once (using the
+``defm`` directive). For example in ``SparcInstrInfo.td``, the ``multiclass``
+pattern ``F3_12`` is defined to create 2 instruction classes each time
+``F3_12`` is invoked:
+
+.. code-block:: llvm
+
+ multiclass F3_12 <string OpcStr, bits<6> Op3Val, SDNode OpNode> {
+ def rr : F3_1 <2, Op3Val,
+ (outs IntRegs:$dst), (ins IntRegs:$b, IntRegs:$c),
+ !strconcat(OpcStr, " $b, $c, $dst"),
+ [(set i32:$dst, (OpNode i32:$b, i32:$c))]>;
+ def ri : F3_2 <2, Op3Val,
+ (outs IntRegs:$dst), (ins IntRegs:$b, i32imm:$c),
+ !strconcat(OpcStr, " $b, $c, $dst"),
+ [(set i32:$dst, (OpNode i32:$b, simm13:$c))]>;
+ }
+
+So when the ``defm`` directive is used for the ``XOR`` and ``ADD``
+instructions, as seen below, it creates four instruction objects: ``XORrr``,
+``XORri``, ``ADDrr``, and ``ADDri``.
+
+.. code-block:: llvm
+
+ defm XOR : F3_12<"xor", 0b000011, xor>;
+ defm ADD : F3_12<"add", 0b000000, add>;
+
+``SparcInstrInfo.td`` also includes definitions for condition codes that are
+referenced by branch instructions. The following definitions in
+``SparcInstrInfo.td`` indicate the bit location of the SPARC condition code.
+For example, the 10\ :sup:`th` bit represents the "greater than" condition for
+integers, and the 22\ :sup:`nd` bit represents the "greater than" condition for
+floats.
+
+.. code-block:: llvm
+
+ def ICC_NE : ICC_VAL< 9>; // Not Equal
+ def ICC_E : ICC_VAL< 1>; // Equal
+ def ICC_G : ICC_VAL<10>; // Greater
+ ...
+ def FCC_U : FCC_VAL<23>; // Unordered
+ def FCC_G : FCC_VAL<22>; // Greater
+ def FCC_UG : FCC_VAL<21>; // Unordered or Greater
+ ...
+
+(Note that ``Sparc.h`` also defines enums that correspond to the same SPARC
+condition codes. Care must be taken to ensure the values in ``Sparc.h``
+correspond to the values in ``SparcInstrInfo.td``. I.e., ``SPCC::ICC_NE = 9``,
+``SPCC::FCC_U = 23`` and so on.)
+
+Instruction Operand Mapping
+---------------------------
+
+The code generator backend maps instruction operands to fields in the
+instruction. Operands are assigned to unbound fields in the instruction in the
+order they are defined. Fields are bound when they are assigned a value. For
+example, the Sparc target defines the ``XNORrr`` instruction as a ``F3_1``
+format instruction having three operands.
+
+.. code-block:: llvm
+
+ def XNORrr : F3_1<2, 0b000111,
+ (outs IntRegs:$dst), (ins IntRegs:$b, IntRegs:$c),
+ "xnor $b, $c, $dst",
+ [(set i32:$dst, (not (xor i32:$b, i32:$c)))]>;
+
+The instruction templates in ``SparcInstrFormats.td`` show the base class for
+``F3_1`` is ``InstSP``.
+
+.. code-block:: llvm
+
+ class InstSP<dag outs, dag ins, string asmstr, list<dag> pattern> : Instruction {
+ field bits<32> Inst;
+ let Namespace = "SP";
+ bits<2> op;
+ let Inst{31-30} = op;
+ dag OutOperandList = outs;
+ dag InOperandList = ins;
+ let AsmString = asmstr;
+ let Pattern = pattern;
+ }
+
+``InstSP`` leaves the ``op`` field unbound.
+
+.. code-block:: llvm
+
+ class F3<dag outs, dag ins, string asmstr, list<dag> pattern>
+ : InstSP<outs, ins, asmstr, pattern> {
+ bits<5> rd;
+ bits<6> op3;
+ bits<5> rs1;
+ let op{1} = 1; // Op = 2 or 3
+ let Inst{29-25} = rd;
+ let Inst{24-19} = op3;
+ let Inst{18-14} = rs1;
+ }
+
+``F3`` binds the ``op`` field and defines the ``rd``, ``op3``, and ``rs1``
+fields. ``F3`` format instructions will bind the operands ``rd``, ``op3``, and
+``rs1`` fields.
+
+.. code-block:: llvm
+
+ class F3_1<bits<2> opVal, bits<6> op3val, dag outs, dag ins,
+ string asmstr, list<dag> pattern> : F3<outs, ins, asmstr, pattern> {
+ bits<8> asi = 0; // asi not currently used
+ bits<5> rs2;
+ let op = opVal;
+ let op3 = op3val;
+ let Inst{13} = 0; // i field = 0
+ let Inst{12-5} = asi; // address space identifier
+ let Inst{4-0} = rs2;
+ }
+
+``F3_1`` binds the ``op3`` field and defines the ``rs2`` fields. ``F3_1``
+format instructions will bind the operands to the ``rd``, ``rs1``, and ``rs2``
+fields. This results in the ``XNORrr`` instruction binding ``$dst``, ``$b``,
+and ``$c`` operands to the ``rd``, ``rs1``, and ``rs2`` fields respectively.
+
+Instruction Operand Name Mapping
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+TableGen will also generate a function called getNamedOperandIdx() which
+can be used to look up an operand's index in a MachineInstr based on its
+TableGen name. Setting the UseNamedOperandTable bit in an instruction's
+TableGen definition will add all of its operands to an enumeration in the
+llvm::XXX:OpName namespace and also add an entry for it into the OperandMap
+table, which can be queried using getNamedOperandIdx()
+
+.. code-block:: llvm
+
+ int DstIndex = SP::getNamedOperandIdx(SP::XNORrr, SP::OpName::dst); // => 0
+ int BIndex = SP::getNamedOperandIdx(SP::XNORrr, SP::OpName::b); // => 1
+ int CIndex = SP::getNamedOperandIdx(SP::XNORrr, SP::OpName::c); // => 2
+ int DIndex = SP::getNamedOperandIdx(SP::XNORrr, SP::OpName::d); // => -1
+
+ ...
+
+The entries in the OpName enum are taken verbatim from the TableGen definitions,
+so operands with lowercase names will have lower case entries in the enum.
+
+To include the getNamedOperandIdx() function in your backend, you will need
+to define a few preprocessor macros in XXXInstrInfo.cpp and XXXInstrInfo.h.
+For example:
+
+XXXInstrInfo.cpp:
+
+.. code-block:: c++
+
+ #define GET_INSTRINFO_NAMED_OPS // For getNamedOperandIdx() function
+ #include "XXXGenInstrInfo.inc"
+
+XXXInstrInfo.h:
+
+.. code-block:: c++
+
+ #define GET_INSTRINFO_OPERAND_ENUM // For OpName enum
+ #include "XXXGenInstrInfo.inc"
+
+ namespace XXX {
+ int16_t getNamedOperandIdx(uint16_t Opcode, uint16_t NamedIndex);
+ } // End namespace XXX
+
+Instruction Operand Types
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+TableGen will also generate an enumeration consisting of all named Operand
+types defined in the backend, in the llvm::XXX::OpTypes namespace.
+Some common immediate Operand types (for instance i8, i32, i64, f32, f64)
+are defined for all targets in ``include/llvm/Target/Target.td``, and are
+available in each Target's OpTypes enum. Also, only named Operand types appear
+in the enumeration: anonymous types are ignored.
+For example, the X86 backend defines ``brtarget`` and ``brtarget8``, both
+instances of the TableGen ``Operand`` class, which represent branch target
+operands:
+
+.. code-block:: llvm
+
+ def brtarget : Operand<OtherVT>;
+ def brtarget8 : Operand<OtherVT>;
+
+This results in:
+
+.. code-block:: c++
+
+ namespace X86 {
+ namespace OpTypes {
+ enum OperandType {
+ ...
+ brtarget,
+ brtarget8,
+ ...
+ i32imm,
+ i64imm,
+ ...
+ OPERAND_TYPE_LIST_END
+ } // End namespace OpTypes
+ } // End namespace X86
+
+In typical TableGen fashion, to use the enum, you will need to define a
+preprocessor macro:
+
+.. code-block:: c++
+
+ #define GET_INSTRINFO_OPERAND_TYPES_ENUM // For OpTypes enum
+ #include "XXXGenInstrInfo.inc"
+
+
+Instruction Scheduling
+----------------------
+
+Instruction itineraries can be queried using MCDesc::getSchedClass(). The
+value can be named by an enumemation in llvm::XXX::Sched namespace generated
+by TableGen in XXXGenInstrInfo.inc. The name of the schedule classes are
+the same as provided in XXXSchedule.td plus a default NoItinerary class.
+
+Instruction Relation Mapping
+----------------------------
+
+This TableGen feature is used to relate instructions with each other. It is
+particularly useful when you have multiple instruction formats and need to
+switch between them after instruction selection. This entire feature is driven
+by relation models which can be defined in ``XXXInstrInfo.td`` files
+according to the target-specific instruction set. Relation models are defined
+using ``InstrMapping`` class as a base. TableGen parses all the models
+and generates instruction relation maps using the specified information.
+Relation maps are emitted as tables in the ``XXXGenInstrInfo.inc`` file
+along with the functions to query them. For the detailed information on how to
+use this feature, please refer to :doc:`HowToUseInstrMappings`.
+
+Implement a subclass of ``TargetInstrInfo``
+-------------------------------------------
+
+The final step is to hand code portions of ``XXXInstrInfo``, which implements
+the interface described in ``TargetInstrInfo.h`` (see :ref:`TargetInstrInfo`).
+These functions return ``0`` or a Boolean or they assert, unless overridden.
+Here's a list of functions that are overridden for the SPARC implementation in
+``SparcInstrInfo.cpp``:
+
+* ``isLoadFromStackSlot`` --- If the specified machine instruction is a direct
+ load from a stack slot, return the register number of the destination and the
+ ``FrameIndex`` of the stack slot.
+
+* ``isStoreToStackSlot`` --- If the specified machine instruction is a direct
+ store to a stack slot, return the register number of the destination and the
+ ``FrameIndex`` of the stack slot.
+
+* ``copyPhysReg`` --- Copy values between a pair of physical registers.
+
+* ``storeRegToStackSlot`` --- Store a register value to a stack slot.
+
+* ``loadRegFromStackSlot`` --- Load a register value from a stack slot.
+
+* ``storeRegToAddr`` --- Store a register value to memory.
+
+* ``loadRegFromAddr`` --- Load a register value from memory.
+
+* ``foldMemoryOperand`` --- Attempt to combine instructions of any load or
+ store instruction for the specified operand(s).
+
+Branch Folding and If Conversion
+--------------------------------
+
+Performance can be improved by combining instructions or by eliminating
+instructions that are never reached. The ``AnalyzeBranch`` method in
+``XXXInstrInfo`` may be implemented to examine conditional instructions and
+remove unnecessary instructions. ``AnalyzeBranch`` looks at the end of a
+machine basic block (MBB) for opportunities for improvement, such as branch
+folding and if conversion. The ``BranchFolder`` and ``IfConverter`` machine
+function passes (see the source files ``BranchFolding.cpp`` and
+``IfConversion.cpp`` in the ``lib/CodeGen`` directory) call ``AnalyzeBranch``
+to improve the control flow graph that represents the instructions.
+
+Several implementations of ``AnalyzeBranch`` (for ARM, Alpha, and X86) can be
+examined as models for your own ``AnalyzeBranch`` implementation. Since SPARC
+does not implement a useful ``AnalyzeBranch``, the ARM target implementation is
+shown below.
+
+``AnalyzeBranch`` returns a Boolean value and takes four parameters:
+
+* ``MachineBasicBlock &MBB`` --- The incoming block to be examined.
+
+* ``MachineBasicBlock *&TBB`` --- A destination block that is returned. For a
+ conditional branch that evaluates to true, ``TBB`` is the destination.
+
+* ``MachineBasicBlock *&FBB`` --- For a conditional branch that evaluates to
+ false, ``FBB`` is returned as the destination.
+
+* ``std::vector<MachineOperand> &Cond`` --- List of operands to evaluate a
+ condition for a conditional branch.
+
+In the simplest case, if a block ends without a branch, then it falls through
+to the successor block. No destination blocks are specified for either ``TBB``
+or ``FBB``, so both parameters return ``NULL``. The start of the
+``AnalyzeBranch`` (see code below for the ARM target) shows the function
+parameters and the code for the simplest case.
+
+.. code-block:: c++
+
+ bool ARMInstrInfo::AnalyzeBranch(MachineBasicBlock &MBB,
+ MachineBasicBlock *&TBB,
+ MachineBasicBlock *&FBB,
+ std::vector<MachineOperand> &Cond) const
+ {
+ MachineBasicBlock::iterator I = MBB.end();
+ if (I == MBB.begin() || !isUnpredicatedTerminator(--I))
+ return false;
+
+If a block ends with a single unconditional branch instruction, then
+``AnalyzeBranch`` (shown below) should return the destination of that branch in
+the ``TBB`` parameter.
+
+.. code-block:: c++
+
+ if (LastOpc == ARM::B || LastOpc == ARM::tB) {
+ TBB = LastInst->getOperand(0).getMBB();
+ return false;
+ }
+
+If a block ends with two unconditional branches, then the second branch is
+never reached. In that situation, as shown below, remove the last branch
+instruction and return the penultimate branch in the ``TBB`` parameter.
+
+.. code-block:: c++
+
+ if ((SecondLastOpc == ARM::B || SecondLastOpc == ARM::tB) &&
+ (LastOpc == ARM::B || LastOpc == ARM::tB)) {
+ TBB = SecondLastInst->getOperand(0).getMBB();
+ I = LastInst;
+ I->eraseFromParent();
+ return false;
+ }
+
+A block may end with a single conditional branch instruction that falls through
+to successor block if the condition evaluates to false. In that case,
+``AnalyzeBranch`` (shown below) should return the destination of that
+conditional branch in the ``TBB`` parameter and a list of operands in the
+``Cond`` parameter to evaluate the condition.
+
+.. code-block:: c++
+
+ if (LastOpc == ARM::Bcc || LastOpc == ARM::tBcc) {
+ // Block ends with fall-through condbranch.
+ TBB = LastInst->getOperand(0).getMBB();
+ Cond.push_back(LastInst->getOperand(1));
+ Cond.push_back(LastInst->getOperand(2));
+ return false;
+ }
+
+If a block ends with both a conditional branch and an ensuing unconditional
+branch, then ``AnalyzeBranch`` (shown below) should return the conditional
+branch destination (assuming it corresponds to a conditional evaluation of
+"``true``") in the ``TBB`` parameter and the unconditional branch destination
+in the ``FBB`` (corresponding to a conditional evaluation of "``false``"). A
+list of operands to evaluate the condition should be returned in the ``Cond``
+parameter.
+
+.. code-block:: c++
+
+ unsigned SecondLastOpc = SecondLastInst->getOpcode();
+
+ if ((SecondLastOpc == ARM::Bcc && LastOpc == ARM::B) ||
+ (SecondLastOpc == ARM::tBcc && LastOpc == ARM::tB)) {
+ TBB = SecondLastInst->getOperand(0).getMBB();
+ Cond.push_back(SecondLastInst->getOperand(1));
+ Cond.push_back(SecondLastInst->getOperand(2));
+ FBB = LastInst->getOperand(0).getMBB();
+ return false;
+ }
+
+For the last two cases (ending with a single conditional branch or ending with
+one conditional and one unconditional branch), the operands returned in the
+``Cond`` parameter can be passed to methods of other instructions to create new
+branches or perform other operations. An implementation of ``AnalyzeBranch``
+requires the helper methods ``RemoveBranch`` and ``InsertBranch`` to manage
+subsequent operations.
+
+``AnalyzeBranch`` should return false indicating success in most circumstances.
+``AnalyzeBranch`` should only return true when the method is stumped about what
+to do, for example, if a block has three terminating branches.
+``AnalyzeBranch`` may return true if it encounters a terminator it cannot
+handle, such as an indirect branch.
+
+.. _instruction-selector:
+
+Instruction Selector
+====================
+
+LLVM uses a ``SelectionDAG`` to represent LLVM IR instructions, and nodes of
+the ``SelectionDAG`` ideally represent native target instructions. During code
+generation, instruction selection passes are performed to convert non-native
+DAG instructions into native target-specific instructions. The pass described
+in ``XXXISelDAGToDAG.cpp`` is used to match patterns and perform DAG-to-DAG
+instruction selection. Optionally, a pass may be defined (in
+``XXXBranchSelector.cpp``) to perform similar DAG-to-DAG operations for branch
+instructions. Later, the code in ``XXXISelLowering.cpp`` replaces or removes
+operations and data types not supported natively (legalizes) in a
+``SelectionDAG``.
+
+TableGen generates code for instruction selection using the following target
+description input files:
+
+* ``XXXInstrInfo.td`` --- Contains definitions of instructions in a
+ target-specific instruction set, generates ``XXXGenDAGISel.inc``, which is
+ included in ``XXXISelDAGToDAG.cpp``.
+
+* ``XXXCallingConv.td`` --- Contains the calling and return value conventions
+ for the target architecture, and it generates ``XXXGenCallingConv.inc``,
+ which is included in ``XXXISelLowering.cpp``.
+
+The implementation of an instruction selection pass must include a header that
+declares the ``FunctionPass`` class or a subclass of ``FunctionPass``. In
+``XXXTargetMachine.cpp``, a Pass Manager (PM) should add each instruction
+selection pass into the queue of passes to run.
+
+The LLVM static compiler (``llc``) is an excellent tool for visualizing the
+contents of DAGs. To display the ``SelectionDAG`` before or after specific
+processing phases, use the command line options for ``llc``, described at
+:ref:`SelectionDAG-Process`.
+
+To describe instruction selector behavior, you should add patterns for lowering
+LLVM code into a ``SelectionDAG`` as the last parameter of the instruction
+definitions in ``XXXInstrInfo.td``. For example, in ``SparcInstrInfo.td``,
+this entry defines a register store operation, and the last parameter describes
+a pattern with the store DAG operator.
+
+.. code-block:: llvm
+
+ def STrr : F3_1< 3, 0b000100, (outs), (ins MEMrr:$addr, IntRegs:$src),
+ "st $src, [$addr]", [(store i32:$src, ADDRrr:$addr)]>;
+
+``ADDRrr`` is a memory mode that is also defined in ``SparcInstrInfo.td``:
+
+.. code-block:: llvm
+
+ def ADDRrr : ComplexPattern<i32, 2, "SelectADDRrr", [], []>;
+
+The definition of ``ADDRrr`` refers to ``SelectADDRrr``, which is a function
+defined in an implementation of the Instructor Selector (such as
+``SparcISelDAGToDAG.cpp``).
+
+In ``lib/Target/TargetSelectionDAG.td``, the DAG operator for store is defined
+below:
+
+.. code-block:: llvm
+
+ def store : PatFrag<(ops node:$val, node:$ptr),
+ (st node:$val, node:$ptr), [{
+ if (StoreSDNode *ST = dyn_cast<StoreSDNode>(N))
+ return !ST->isTruncatingStore() &&
+ ST->getAddressingMode() == ISD::UNINDEXED;
+ return false;
+ }]>;
+
+``XXXInstrInfo.td`` also generates (in ``XXXGenDAGISel.inc``) the
+``SelectCode`` method that is used to call the appropriate processing method
+for an instruction. In this example, ``SelectCode`` calls ``Select_ISD_STORE``
+for the ``ISD::STORE`` opcode.
+
+.. code-block:: c++
+
+ SDNode *SelectCode(SDValue N) {
+ ...
+ MVT::ValueType NVT = N.getNode()->getValueType(0);
+ switch (N.getOpcode()) {
+ case ISD::STORE: {
+ switch (NVT) {
+ default:
+ return Select_ISD_STORE(N);
+ break;
+ }
+ break;
+ }
+ ...
+
+The pattern for ``STrr`` is matched, so elsewhere in ``XXXGenDAGISel.inc``,
+code for ``STrr`` is created for ``Select_ISD_STORE``. The ``Emit_22`` method
+is also generated in ``XXXGenDAGISel.inc`` to complete the processing of this
+instruction.
+
+.. code-block:: c++
+
+ SDNode *Select_ISD_STORE(const SDValue &N) {
+ SDValue Chain = N.getOperand(0);
+ if (Predicate_store(N.getNode())) {
+ SDValue N1 = N.getOperand(1);
+ SDValue N2 = N.getOperand(2);
+ SDValue CPTmp0;
+ SDValue CPTmp1;
+
+ // Pattern: (st:void i32:i32:$src,
+ // ADDRrr:i32:$addr)<<P:Predicate_store>>
+ // Emits: (STrr:void ADDRrr:i32:$addr, IntRegs:i32:$src)
+ // Pattern complexity = 13 cost = 1 size = 0
+ if (SelectADDRrr(N, N2, CPTmp0, CPTmp1) &&
+ N1.getNode()->getValueType(0) == MVT::i32 &&
+ N2.getNode()->getValueType(0) == MVT::i32) {
+ return Emit_22(N, SP::STrr, CPTmp0, CPTmp1);
+ }
+ ...
+
+The SelectionDAG Legalize Phase
+-------------------------------
+
+The Legalize phase converts a DAG to use types and operations that are natively
+supported by the target. For natively unsupported types and operations, you
+need to add code to the target-specific ``XXXTargetLowering`` implementation to
+convert unsupported types and operations to supported ones.
+
+In the constructor for the ``XXXTargetLowering`` class, first use the
+``addRegisterClass`` method to specify which types are supported and which
+register classes are associated with them. The code for the register classes
+are generated by TableGen from ``XXXRegisterInfo.td`` and placed in
+``XXXGenRegisterInfo.h.inc``. For example, the implementation of the
+constructor for the SparcTargetLowering class (in ``SparcISelLowering.cpp``)
+starts with the following code:
+
+.. code-block:: c++
+
+ addRegisterClass(MVT::i32, SP::IntRegsRegisterClass);
+ addRegisterClass(MVT::f32, SP::FPRegsRegisterClass);
+ addRegisterClass(MVT::f64, SP::DFPRegsRegisterClass);
+
+You should examine the node types in the ``ISD`` namespace
+(``include/llvm/CodeGen/SelectionDAGNodes.h``) and determine which operations
+the target natively supports. For operations that do **not** have native
+support, add a callback to the constructor for the ``XXXTargetLowering`` class,
+so the instruction selection process knows what to do. The ``TargetLowering``
+class callback methods (declared in ``llvm/Target/TargetLowering.h``) are:
+
+* ``setOperationAction`` --- General operation.
+* ``setLoadExtAction`` --- Load with extension.
+* ``setTruncStoreAction`` --- Truncating store.
+* ``setIndexedLoadAction`` --- Indexed load.
+* ``setIndexedStoreAction`` --- Indexed store.
+* ``setConvertAction`` --- Type conversion.
+* ``setCondCodeAction`` --- Support for a given condition code.
+
+Note: on older releases, ``setLoadXAction`` is used instead of
+``setLoadExtAction``. Also, on older releases, ``setCondCodeAction`` may not
+be supported. Examine your release to see what methods are specifically
+supported.
+
+These callbacks are used to determine that an operation does or does not work
+with a specified type (or types). And in all cases, the third parameter is a
+``LegalAction`` type enum value: ``Promote``, ``Expand``, ``Custom``, or
+``Legal``. ``SparcISelLowering.cpp`` contains examples of all four
+``LegalAction`` values.
+
+Promote
+^^^^^^^
+
+For an operation without native support for a given type, the specified type
+may be promoted to a larger type that is supported. For example, SPARC does
+not support a sign-extending load for Boolean values (``i1`` type), so in
+``SparcISelLowering.cpp`` the third parameter below, ``Promote``, changes
+``i1`` type values to a large type before loading.
+
+.. code-block:: c++
+
+ setLoadExtAction(ISD::SEXTLOAD, MVT::i1, Promote);
+
+Expand
+^^^^^^
+
+For a type without native support, a value may need to be broken down further,
+rather than promoted. For an operation without native support, a combination
+of other operations may be used to similar effect. In SPARC, the
+floating-point sine and cosine trig operations are supported by expansion to
+other operations, as indicated by the third parameter, ``Expand``, to
+``setOperationAction``:
+
+.. code-block:: c++
+
+ setOperationAction(ISD::FSIN, MVT::f32, Expand);
+ setOperationAction(ISD::FCOS, MVT::f32, Expand);
+
+Custom
+^^^^^^
+
+For some operations, simple type promotion or operation expansion may be
+insufficient. In some cases, a special intrinsic function must be implemented.
+
+For example, a constant value may require special treatment, or an operation
+may require spilling and restoring registers in the stack and working with
+register allocators.
+
+As seen in ``SparcISelLowering.cpp`` code below, to perform a type conversion
+from a floating point value to a signed integer, first the
+``setOperationAction`` should be called with ``Custom`` as the third parameter:
+
+.. code-block:: c++
+
+ setOperationAction(ISD::FP_TO_SINT, MVT::i32, Custom);
+
+In the ``LowerOperation`` method, for each ``Custom`` operation, a case
+statement should be added to indicate what function to call. In the following
+code, an ``FP_TO_SINT`` opcode will call the ``LowerFP_TO_SINT`` method:
+
+.. code-block:: c++
+
+ SDValue SparcTargetLowering::LowerOperation(SDValue Op, SelectionDAG &DAG) {
+ switch (Op.getOpcode()) {
+ case ISD::FP_TO_SINT: return LowerFP_TO_SINT(Op, DAG);
+ ...
+ }
+ }
+
+Finally, the ``LowerFP_TO_SINT`` method is implemented, using an FP register to
+convert the floating-point value to an integer.
+
+.. code-block:: c++
+
+ static SDValue LowerFP_TO_SINT(SDValue Op, SelectionDAG &DAG) {
+ assert(Op.getValueType() == MVT::i32);
+ Op = DAG.getNode(SPISD::FTOI, MVT::f32, Op.getOperand(0));
+ return DAG.getNode(ISD::BITCAST, MVT::i32, Op);
+ }
+
+Legal
+^^^^^
+
+The ``Legal`` ``LegalizeAction`` enum value simply indicates that an operation
+**is** natively supported. ``Legal`` represents the default condition, so it
+is rarely used. In ``SparcISelLowering.cpp``, the action for ``CTPOP`` (an
+operation to count the bits set in an integer) is natively supported only for
+SPARC v9. The following code enables the ``Expand`` conversion technique for
+non-v9 SPARC implementations.
+
+.. code-block:: c++
+
+ setOperationAction(ISD::CTPOP, MVT::i32, Expand);
+ ...
+ if (TM.getSubtarget<SparcSubtarget>().isV9())
+ setOperationAction(ISD::CTPOP, MVT::i32, Legal);
+
+Calling Conventions
+-------------------
+
+To support target-specific calling conventions, ``XXXGenCallingConv.td`` uses
+interfaces (such as ``CCIfType`` and ``CCAssignToReg``) that are defined in
+``lib/Target/TargetCallingConv.td``. TableGen can take the target descriptor
+file ``XXXGenCallingConv.td`` and generate the header file
+``XXXGenCallingConv.inc``, which is typically included in
+``XXXISelLowering.cpp``. You can use the interfaces in
+``TargetCallingConv.td`` to specify:
+
+* The order of parameter allocation.
+
+* Where parameters and return values are placed (that is, on the stack or in
+ registers).
+
+* Which registers may be used.
+
+* Whether the caller or callee unwinds the stack.
+
+The following example demonstrates the use of the ``CCIfType`` and
+``CCAssignToReg`` interfaces. If the ``CCIfType`` predicate is true (that is,
+if the current argument is of type ``f32`` or ``f64``), then the action is
+performed. In this case, the ``CCAssignToReg`` action assigns the argument
+value to the first available register: either ``R0`` or ``R1``.
+
+.. code-block:: llvm
+
+ CCIfType<[f32,f64], CCAssignToReg<[R0, R1]>>
+
+``SparcCallingConv.td`` contains definitions for a target-specific return-value
+calling convention (``RetCC_Sparc32``) and a basic 32-bit C calling convention
+(``CC_Sparc32``). The definition of ``RetCC_Sparc32`` (shown below) indicates
+which registers are used for specified scalar return types. A single-precision
+float is returned to register ``F0``, and a double-precision float goes to
+register ``D0``. A 32-bit integer is returned in register ``I0`` or ``I1``.
+
+.. code-block:: llvm
+
+ def RetCC_Sparc32 : CallingConv<[
+ CCIfType<[i32], CCAssignToReg<[I0, I1]>>,
+ CCIfType<[f32], CCAssignToReg<[F0]>>,
+ CCIfType<[f64], CCAssignToReg<[D0]>>
+ ]>;
+
+The definition of ``CC_Sparc32`` in ``SparcCallingConv.td`` introduces
+``CCAssignToStack``, which assigns the value to a stack slot with the specified
+size and alignment. In the example below, the first parameter, 4, indicates
+the size of the slot, and the second parameter, also 4, indicates the stack
+alignment along 4-byte units. (Special cases: if size is zero, then the ABI
+size is used; if alignment is zero, then the ABI alignment is used.)
+
+.. code-block:: llvm
+
+ def CC_Sparc32 : CallingConv<[
+ // All arguments get passed in integer registers if there is space.
+ CCIfType<[i32, f32, f64], CCAssignToReg<[I0, I1, I2, I3, I4, I5]>>,
+ CCAssignToStack<4, 4>
+ ]>;
+
+``CCDelegateTo`` is another commonly used interface, which tries to find a
+specified sub-calling convention, and, if a match is found, it is invoked. In
+the following example (in ``X86CallingConv.td``), the definition of
+``RetCC_X86_32_C`` ends with ``CCDelegateTo``. After the current value is
+assigned to the register ``ST0`` or ``ST1``, the ``RetCC_X86Common`` is
+invoked.
+
+.. code-block:: llvm
+
+ def RetCC_X86_32_C : CallingConv<[
+ CCIfType<[f32], CCAssignToReg<[ST0, ST1]>>,
+ CCIfType<[f64], CCAssignToReg<[ST0, ST1]>>,
+ CCDelegateTo<RetCC_X86Common>
+ ]>;
+
+``CCIfCC`` is an interface that attempts to match the given name to the current
+calling convention. If the name identifies the current calling convention,
+then a specified action is invoked. In the following example (in
+``X86CallingConv.td``), if the ``Fast`` calling convention is in use, then
+``RetCC_X86_32_Fast`` is invoked. If the ``SSECall`` calling convention is in
+use, then ``RetCC_X86_32_SSE`` is invoked.
+
+.. code-block:: llvm
+
+ def RetCC_X86_32 : CallingConv<[
+ CCIfCC<"CallingConv::Fast", CCDelegateTo<RetCC_X86_32_Fast>>,
+ CCIfCC<"CallingConv::X86_SSECall", CCDelegateTo<RetCC_X86_32_SSE>>,
+ CCDelegateTo<RetCC_X86_32_C>
+ ]>;
+
+Other calling convention interfaces include:
+
+* ``CCIf <predicate, action>`` --- If the predicate matches, apply the action.
+
+* ``CCIfInReg <action>`` --- If the argument is marked with the "``inreg``"
+ attribute, then apply the action.
+
+* ``CCIfNest <action>`` --- If the argument is marked with the "``nest``"
+ attribute, then apply the action.
+
+* ``CCIfNotVarArg <action>`` --- If the current function does not take a
+ variable number of arguments, apply the action.
+
+* ``CCAssignToRegWithShadow <registerList, shadowList>`` --- similar to
+ ``CCAssignToReg``, but with a shadow list of registers.
+
+* ``CCPassByVal <size, align>`` --- Assign value to a stack slot with the
+ minimum specified size and alignment.
+
+* ``CCPromoteToType <type>`` --- Promote the current value to the specified
+ type.
+
+* ``CallingConv <[actions]>`` --- Define each calling convention that is
+ supported.
+
+Assembly Printer
+================
+
+During the code emission stage, the code generator may utilize an LLVM pass to
+produce assembly output. To do this, you want to implement the code for a
+printer that converts LLVM IR to a GAS-format assembly language for your target
+machine, using the following steps:
+
+* Define all the assembly strings for your target, adding them to the
+ instructions defined in the ``XXXInstrInfo.td`` file. (See
+ :ref:`instruction-set`.) TableGen will produce an output file
+ (``XXXGenAsmWriter.inc``) with an implementation of the ``printInstruction``
+ method for the ``XXXAsmPrinter`` class.
+
+* Write ``XXXTargetAsmInfo.h``, which contains the bare-bones declaration of
+ the ``XXXTargetAsmInfo`` class (a subclass of ``TargetAsmInfo``).
+
+* Write ``XXXTargetAsmInfo.cpp``, which contains target-specific values for
+ ``TargetAsmInfo`` properties and sometimes new implementations for methods.
+
+* Write ``XXXAsmPrinter.cpp``, which implements the ``AsmPrinter`` class that
+ performs the LLVM-to-assembly conversion.
+
+The code in ``XXXTargetAsmInfo.h`` is usually a trivial declaration of the
+``XXXTargetAsmInfo`` class for use in ``XXXTargetAsmInfo.cpp``. Similarly,
+``XXXTargetAsmInfo.cpp`` usually has a few declarations of ``XXXTargetAsmInfo``
+replacement values that override the default values in ``TargetAsmInfo.cpp``.
+For example in ``SparcTargetAsmInfo.cpp``:
+
+.. code-block:: c++
+
+ SparcTargetAsmInfo::SparcTargetAsmInfo(const SparcTargetMachine &TM) {
+ Data16bitsDirective = "\t.half\t";
+ Data32bitsDirective = "\t.word\t";
+ Data64bitsDirective = 0; // .xword is only supported by V9.
+ ZeroDirective = "\t.skip\t";
+ CommentString = "!";
+ ConstantPoolSection = "\t.section \".rodata\",#alloc\n";
+ }
+
+The X86 assembly printer implementation (``X86TargetAsmInfo``) is an example
+where the target specific ``TargetAsmInfo`` class uses an overridden methods:
+``ExpandInlineAsm``.
+
+A target-specific implementation of ``AsmPrinter`` is written in
+``XXXAsmPrinter.cpp``, which implements the ``AsmPrinter`` class that converts
+the LLVM to printable assembly. The implementation must include the following
+headers that have declarations for the ``AsmPrinter`` and
+``MachineFunctionPass`` classes. The ``MachineFunctionPass`` is a subclass of
+``FunctionPass``.
+
+.. code-block:: c++
+
+ #include "llvm/CodeGen/AsmPrinter.h"
+ #include "llvm/CodeGen/MachineFunctionPass.h"
+
+As a ``FunctionPass``, ``AsmPrinter`` first calls ``doInitialization`` to set
+up the ``AsmPrinter``. In ``SparcAsmPrinter``, a ``Mangler`` object is
+instantiated to process variable names.
+
+In ``XXXAsmPrinter.cpp``, the ``runOnMachineFunction`` method (declared in
+``MachineFunctionPass``) must be implemented for ``XXXAsmPrinter``. In
+``MachineFunctionPass``, the ``runOnFunction`` method invokes
+``runOnMachineFunction``. Target-specific implementations of
+``runOnMachineFunction`` differ, but generally do the following to process each
+machine function:
+
+* Call ``SetupMachineFunction`` to perform initialization.
+
+* Call ``EmitConstantPool`` to print out (to the output stream) constants which
+ have been spilled to memory.
+
+* Call ``EmitJumpTableInfo`` to print out jump tables used by the current
+ function.
+
+* Print out the label for the current function.
+
+* Print out the code for the function, including basic block labels and the
+ assembly for the instruction (using ``printInstruction``)
+
+The ``XXXAsmPrinter`` implementation must also include the code generated by
+TableGen that is output in the ``XXXGenAsmWriter.inc`` file. The code in
+``XXXGenAsmWriter.inc`` contains an implementation of the ``printInstruction``
+method that may call these methods:
+
+* ``printOperand``
+* ``printMemOperand``
+* ``printCCOperand`` (for conditional statements)
+* ``printDataDirective``
+* ``printDeclare``
+* ``printImplicitDef``
+* ``printInlineAsm``
+
+The implementations of ``printDeclare``, ``printImplicitDef``,
+``printInlineAsm``, and ``printLabel`` in ``AsmPrinter.cpp`` are generally
+adequate for printing assembly and do not need to be overridden.
+
+The ``printOperand`` method is implemented with a long ``switch``/``case``
+statement for the type of operand: register, immediate, basic block, external
+symbol, global address, constant pool index, or jump table index. For an
+instruction with a memory address operand, the ``printMemOperand`` method
+should be implemented to generate the proper output. Similarly,
+``printCCOperand`` should be used to print a conditional operand.
+
+``doFinalization`` should be overridden in ``XXXAsmPrinter``, and it should be
+called to shut down the assembly printer. During ``doFinalization``, global
+variables and constants are printed to output.
+
+Subtarget Support
+=================
+
+Subtarget support is used to inform the code generation process of instruction
+set variations for a given chip set. For example, the LLVM SPARC
+implementation provided covers three major versions of the SPARC microprocessor
+architecture: Version 8 (V8, which is a 32-bit architecture), Version 9 (V9, a
+64-bit architecture), and the UltraSPARC architecture. V8 has 16
+double-precision floating-point registers that are also usable as either 32
+single-precision or 8 quad-precision registers. V8 is also purely big-endian.
+V9 has 32 double-precision floating-point registers that are also usable as 16
+quad-precision registers, but cannot be used as single-precision registers.
+The UltraSPARC architecture combines V9 with UltraSPARC Visual Instruction Set
+extensions.
+
+If subtarget support is needed, you should implement a target-specific
+``XXXSubtarget`` class for your architecture. This class should process the
+command-line options ``-mcpu=`` and ``-mattr=``.
+
+TableGen uses definitions in the ``Target.td`` and ``Sparc.td`` files to
+generate code in ``SparcGenSubtarget.inc``. In ``Target.td``, shown below, the
+``SubtargetFeature`` interface is defined. The first 4 string parameters of
+the ``SubtargetFeature`` interface are a feature name, an attribute set by the
+feature, the value of the attribute, and a description of the feature. (The
+fifth parameter is a list of features whose presence is implied, and its
+default value is an empty array.)
+
+.. code-block:: llvm
+
+ class SubtargetFeature<string n, string a, string v, string d,
+ list<SubtargetFeature> i = []> {
+ string Name = n;
+ string Attribute = a;
+ string Value = v;
+ string Desc = d;
+ list<SubtargetFeature> Implies = i;
+ }
+
+In the ``Sparc.td`` file, the ``SubtargetFeature`` is used to define the
+following features.
+
+.. code-block:: llvm
+
+ def FeatureV9 : SubtargetFeature<"v9", "IsV9", "true",
+ "Enable SPARC-V9 instructions">;
+ def FeatureV8Deprecated : SubtargetFeature<"deprecated-v8",
+ "V8DeprecatedInsts", "true",
+ "Enable deprecated V8 instructions in V9 mode">;
+ def FeatureVIS : SubtargetFeature<"vis", "IsVIS", "true",
+ "Enable UltraSPARC Visual Instruction Set extensions">;
+
+Elsewhere in ``Sparc.td``, the ``Proc`` class is defined and then is used to
+define particular SPARC processor subtypes that may have the previously
+described features.
+
+.. code-block:: llvm
+
+ class Proc<string Name, list<SubtargetFeature> Features>
+ : Processor<Name, NoItineraries, Features>;
+
+ def : Proc<"generic", []>;
+ def : Proc<"v8", []>;
+ def : Proc<"supersparc", []>;
+ def : Proc<"sparclite", []>;
+ def : Proc<"f934", []>;
+ def : Proc<"hypersparc", []>;
+ def : Proc<"sparclite86x", []>;
+ def : Proc<"sparclet", []>;
+ def : Proc<"tsc701", []>;
+ def : Proc<"v9", [FeatureV9]>;
+ def : Proc<"ultrasparc", [FeatureV9, FeatureV8Deprecated]>;
+ def : Proc<"ultrasparc3", [FeatureV9, FeatureV8Deprecated]>;
+ def : Proc<"ultrasparc3-vis", [FeatureV9, FeatureV8Deprecated, FeatureVIS]>;
+
+From ``Target.td`` and ``Sparc.td`` files, the resulting
+``SparcGenSubtarget.inc`` specifies enum values to identify the features,
+arrays of constants to represent the CPU features and CPU subtypes, and the
+``ParseSubtargetFeatures`` method that parses the features string that sets
+specified subtarget options. The generated ``SparcGenSubtarget.inc`` file
+should be included in the ``SparcSubtarget.cpp``. The target-specific
+implementation of the ``XXXSubtarget`` method should follow this pseudocode:
+
+.. code-block:: c++
+
+ XXXSubtarget::XXXSubtarget(const Module &M, const std::string &FS) {
+ // Set the default features
+ // Determine default and user specified characteristics of the CPU
+ // Call ParseSubtargetFeatures(FS, CPU) to parse the features string
+ // Perform any additional operations
+ }
+
+JIT Support
+===========
+
+The implementation of a target machine optionally includes a Just-In-Time (JIT)
+code generator that emits machine code and auxiliary structures as binary
+output that can be written directly to memory. To do this, implement JIT code
+generation by performing the following steps:
+
+* Write an ``XXXCodeEmitter.cpp`` file that contains a machine function pass
+ that transforms target-machine instructions into relocatable machine
+ code.
+
+* Write an ``XXXJITInfo.cpp`` file that implements the JIT interfaces for
+ target-specific code-generation activities, such as emitting machine code and
+ stubs.
+
+* Modify ``XXXTargetMachine`` so that it provides a ``TargetJITInfo`` object
+ through its ``getJITInfo`` method.
+
+There are several different approaches to writing the JIT support code. For
+instance, TableGen and target descriptor files may be used for creating a JIT
+code generator, but are not mandatory. For the Alpha and PowerPC target
+machines, TableGen is used to generate ``XXXGenCodeEmitter.inc``, which
+contains the binary coding of machine instructions and the
+``getBinaryCodeForInstr`` method to access those codes. Other JIT
+implementations do not.
+
+Both ``XXXJITInfo.cpp`` and ``XXXCodeEmitter.cpp`` must include the
+``llvm/CodeGen/MachineCodeEmitter.h`` header file that defines the
+``MachineCodeEmitter`` class containing code for several callback functions
+that write data (in bytes, words, strings, etc.) to the output stream.
+
+Machine Code Emitter
+--------------------
+
+In ``XXXCodeEmitter.cpp``, a target-specific of the ``Emitter`` class is
+implemented as a function pass (subclass of ``MachineFunctionPass``). The
+target-specific implementation of ``runOnMachineFunction`` (invoked by
+``runOnFunction`` in ``MachineFunctionPass``) iterates through the
+``MachineBasicBlock`` calls ``emitInstruction`` to process each instruction and
+emit binary code. ``emitInstruction`` is largely implemented with case
+statements on the instruction types defined in ``XXXInstrInfo.h``. For
+example, in ``X86CodeEmitter.cpp``, the ``emitInstruction`` method is built
+around the following ``switch``/``case`` statements:
+
+.. code-block:: c++
+
+ switch (Desc->TSFlags & X86::FormMask) {
+ case X86II::Pseudo: // for not yet implemented instructions
+ ... // or pseudo-instructions
+ break;
+ case X86II::RawFrm: // for instructions with a fixed opcode value
+ ...
+ break;
+ case X86II::AddRegFrm: // for instructions that have one register operand
+ ... // added to their opcode
+ break;
+ case X86II::MRMDestReg:// for instructions that use the Mod/RM byte
+ ... // to specify a destination (register)
+ break;
+ case X86II::MRMDestMem:// for instructions that use the Mod/RM byte
+ ... // to specify a destination (memory)
+ break;
+ case X86II::MRMSrcReg: // for instructions that use the Mod/RM byte
+ ... // to specify a source (register)
+ break;
+ case X86II::MRMSrcMem: // for instructions that use the Mod/RM byte
+ ... // to specify a source (memory)
+ break;
+ case X86II::MRM0r: case X86II::MRM1r: // for instructions that operate on
+ case X86II::MRM2r: case X86II::MRM3r: // a REGISTER r/m operand and
+ case X86II::MRM4r: case X86II::MRM5r: // use the Mod/RM byte and a field
+ case X86II::MRM6r: case X86II::MRM7r: // to hold extended opcode data
+ ...
+ break;
+ case X86II::MRM0m: case X86II::MRM1m: // for instructions that operate on
+ case X86II::MRM2m: case X86II::MRM3m: // a MEMORY r/m operand and
+ case X86II::MRM4m: case X86II::MRM5m: // use the Mod/RM byte and a field
+ case X86II::MRM6m: case X86II::MRM7m: // to hold extended opcode data
+ ...
+ break;
+ case X86II::MRMInitReg: // for instructions whose source and
+ ... // destination are the same register
+ break;
+ }
+
+The implementations of these case statements often first emit the opcode and
+then get the operand(s). Then depending upon the operand, helper methods may
+be called to process the operand(s). For example, in ``X86CodeEmitter.cpp``,
+for the ``X86II::AddRegFrm`` case, the first data emitted (by ``emitByte``) is
+the opcode added to the register operand. Then an object representing the
+machine operand, ``MO1``, is extracted. The helper methods such as
+``isImmediate``, ``isGlobalAddress``, ``isExternalSymbol``,
+``isConstantPoolIndex``, and ``isJumpTableIndex`` determine the operand type.
+(``X86CodeEmitter.cpp`` also has private methods such as ``emitConstant``,
+``emitGlobalAddress``, ``emitExternalSymbolAddress``, ``emitConstPoolAddress``,
+and ``emitJumpTableAddress`` that emit the data into the output stream.)
+
+.. code-block:: c++
+
+ case X86II::AddRegFrm:
+ MCE.emitByte(BaseOpcode + getX86RegNum(MI.getOperand(CurOp++).getReg()));
+
+ if (CurOp != NumOps) {
+ const MachineOperand &MO1 = MI.getOperand(CurOp++);
+ unsigned Size = X86InstrInfo::sizeOfImm(Desc);
+ if (MO1.isImmediate())
+ emitConstant(MO1.getImm(), Size);
+ else {
+ unsigned rt = Is64BitMode ? X86::reloc_pcrel_word
+ : (IsPIC ? X86::reloc_picrel_word : X86::reloc_absolute_word);
+ if (Opcode == X86::MOV64ri)
+ rt = X86::reloc_absolute_dword; // FIXME: add X86II flag?
+ if (MO1.isGlobalAddress()) {
+ bool NeedStub = isa<Function>(MO1.getGlobal());
+ bool isLazy = gvNeedsLazyPtr(MO1.getGlobal());
+ emitGlobalAddress(MO1.getGlobal(), rt, MO1.getOffset(), 0,
+ NeedStub, isLazy);
+ } else if (MO1.isExternalSymbol())
+ emitExternalSymbolAddress(MO1.getSymbolName(), rt);
+ else if (MO1.isConstantPoolIndex())
+ emitConstPoolAddress(MO1.getIndex(), rt);
+ else if (MO1.isJumpTableIndex())
+ emitJumpTableAddress(MO1.getIndex(), rt);
+ }
+ }
+ break;
+
+In the previous example, ``XXXCodeEmitter.cpp`` uses the variable ``rt``, which
+is a ``RelocationType`` enum that may be used to relocate addresses (for
+example, a global address with a PIC base offset). The ``RelocationType`` enum
+for that target is defined in the short target-specific ``XXXRelocations.h``
+file. The ``RelocationType`` is used by the ``relocate`` method defined in
+``XXXJITInfo.cpp`` to rewrite addresses for referenced global symbols.
+
+For example, ``X86Relocations.h`` specifies the following relocation types for
+the X86 addresses. In all four cases, the relocated value is added to the
+value already in memory. For ``reloc_pcrel_word`` and ``reloc_picrel_word``,
+there is an additional initial adjustment.
+
+.. code-block:: c++
+
+ enum RelocationType {
+ reloc_pcrel_word = 0, // add reloc value after adjusting for the PC loc
+ reloc_picrel_word = 1, // add reloc value after adjusting for the PIC base
+ reloc_absolute_word = 2, // absolute relocation; no additional adjustment
+ reloc_absolute_dword = 3 // absolute relocation; no additional adjustment
+ };
+
+Target JIT Info
+---------------
+
+``XXXJITInfo.cpp`` implements the JIT interfaces for target-specific
+code-generation activities, such as emitting machine code and stubs. At
+minimum, a target-specific version of ``XXXJITInfo`` implements the following:
+
+* ``getLazyResolverFunction`` --- Initializes the JIT, gives the target a
+ function that is used for compilation.
+
+* ``emitFunctionStub`` --- Returns a native function with a specified address
+ for a callback function.
+
+* ``relocate`` --- Changes the addresses of referenced globals, based on
+ relocation types.
+
+* Callback function that are wrappers to a function stub that is used when the
+ real target is not initially known.
+
+``getLazyResolverFunction`` is generally trivial to implement. It makes the
+incoming parameter as the global ``JITCompilerFunction`` and returns the
+callback function that will be used a function wrapper. For the Alpha target
+(in ``AlphaJITInfo.cpp``), the ``getLazyResolverFunction`` implementation is
+simply:
+
+.. code-block:: c++
+
+ TargetJITInfo::LazyResolverFn AlphaJITInfo::getLazyResolverFunction(
+ JITCompilerFn F) {
+ JITCompilerFunction = F;
+ return AlphaCompilationCallback;
+ }
+
+For the X86 target, the ``getLazyResolverFunction`` implementation is a little
+more complicated, because it returns a different callback function for
+processors with SSE instructions and XMM registers.
+
+The callback function initially saves and later restores the callee register
+values, incoming arguments, and frame and return address. The callback
+function needs low-level access to the registers or stack, so it is typically
+implemented with assembler.
+
Added: www-releases/trunk/3.6.1/docs/_sources/WritingAnLLVMPass.txt
URL: http://llvm.org/viewvc/llvm-project/www-releases/trunk/3.6.1/docs/_sources/WritingAnLLVMPass.txt?rev=238135&view=auto
==============================================================================
--- www-releases/trunk/3.6.1/docs/_sources/WritingAnLLVMPass.txt (added)
+++ www-releases/trunk/3.6.1/docs/_sources/WritingAnLLVMPass.txt Mon May 25 08:53:02 2015
@@ -0,0 +1,1434 @@
+====================
+Writing an LLVM Pass
+====================
+
+.. contents::
+ :local:
+
+Introduction --- What is a pass?
+================================
+
+The LLVM Pass Framework is an important part of the LLVM system, because LLVM
+passes are where most of the interesting parts of the compiler exist. Passes
+perform the transformations and optimizations that make up the compiler, they
+build the analysis results that are used by these transformations, and they
+are, above all, a structuring technique for compiler code.
+
+All LLVM passes are subclasses of the `Pass
+<http://llvm.org/doxygen/classllvm_1_1Pass.html>`_ class, which implement
+functionality by overriding virtual methods inherited from ``Pass``. Depending
+on how your pass works, you should inherit from the :ref:`ModulePass
+<writing-an-llvm-pass-ModulePass>` , :ref:`CallGraphSCCPass
+<writing-an-llvm-pass-CallGraphSCCPass>`, :ref:`FunctionPass
+<writing-an-llvm-pass-FunctionPass>` , or :ref:`LoopPass
+<writing-an-llvm-pass-LoopPass>`, or :ref:`RegionPass
+<writing-an-llvm-pass-RegionPass>`, or :ref:`BasicBlockPass
+<writing-an-llvm-pass-BasicBlockPass>` classes, which gives the system more
+information about what your pass does, and how it can be combined with other
+passes. One of the main features of the LLVM Pass Framework is that it
+schedules passes to run in an efficient way based on the constraints that your
+pass meets (which are indicated by which class they derive from).
+
+We start by showing you how to construct a pass, everything from setting up the
+code, to compiling, loading, and executing it. After the basics are down, more
+advanced features are discussed.
+
+Quick Start --- Writing hello world
+===================================
+
+Here we describe how to write the "hello world" of passes. The "Hello" pass is
+designed to simply print out the name of non-external functions that exist in
+the program being compiled. It does not modify the program at all, it just
+inspects it. The source code and files for this pass are available in the LLVM
+source tree in the ``lib/Transforms/Hello`` directory.
+
+.. _writing-an-llvm-pass-makefile:
+
+Setting up the build environment
+--------------------------------
+
+.. FIXME: Why does this recommend to build in-tree?
+
+First, configure and build LLVM. This needs to be done directly inside the
+LLVM source tree rather than in a separate objects directory. Next, you need
+to create a new directory somewhere in the LLVM source base. For this example,
+we'll assume that you made ``lib/Transforms/Hello``. Finally, you must set up
+a build script (``Makefile``) that will compile the source code for the new
+pass. To do this, copy the following into ``Makefile``:
+
+.. code-block:: make
+
+ # Makefile for hello pass
+
+ # Path to top level of LLVM hierarchy
+ LEVEL = ../../..
+
+ # Name of the library to build
+ LIBRARYNAME = Hello
+
+ # Make the shared library become a loadable module so the tools can
+ # dlopen/dlsym on the resulting library.
+ LOADABLE_MODULE = 1
+
+ # Include the makefile implementation stuff
+ include $(LEVEL)/Makefile.common
+
+This makefile specifies that all of the ``.cpp`` files in the current directory
+are to be compiled and linked together into a shared object
+``$(LEVEL)/Debug+Asserts/lib/Hello.so`` that can be dynamically loaded by the
+:program:`opt` or :program:`bugpoint` tools via their :option:`-load` options.
+If your operating system uses a suffix other than ``.so`` (such as Windows or Mac
+OS X), the appropriate extension will be used.
+
+If you are used CMake to build LLVM, see :ref:`cmake-out-of-source-pass`.
+
+Now that we have the build scripts set up, we just need to write the code for
+the pass itself.
+
+.. _writing-an-llvm-pass-basiccode:
+
+Basic code required
+-------------------
+
+Now that we have a way to compile our new pass, we just have to write it.
+Start out with:
+
+.. code-block:: c++
+
+ #include "llvm/Pass.h"
+ #include "llvm/IR/Function.h"
+ #include "llvm/Support/raw_ostream.h"
+
+Which are needed because we are writing a `Pass
+<http://llvm.org/doxygen/classllvm_1_1Pass.html>`_, we are operating on
+`Function <http://llvm.org/doxygen/classllvm_1_1Function.html>`_\ s, and we will
+be doing some printing.
+
+Next we have:
+
+.. code-block:: c++
+
+ using namespace llvm;
+
+... which is required because the functions from the include files live in the
+llvm namespace.
+
+Next we have:
+
+.. code-block:: c++
+
+ namespace {
+
+... which starts out an anonymous namespace. Anonymous namespaces are to C++
+what the "``static``" keyword is to C (at global scope). It makes the things
+declared inside of the anonymous namespace visible only to the current file.
+If you're not familiar with them, consult a decent C++ book for more
+information.
+
+Next, we declare our pass itself:
+
+.. code-block:: c++
+
+ struct Hello : public FunctionPass {
+
+This declares a "``Hello``" class that is a subclass of :ref:`FunctionPass
+<writing-an-llvm-pass-FunctionPass>`. The different builtin pass subclasses
+are described in detail :ref:`later <writing-an-llvm-pass-pass-classes>`, but
+for now, know that ``FunctionPass`` operates on a function at a time.
+
+.. code-block:: c++
+
+ static char ID;
+ Hello() : FunctionPass(ID) {}
+
+This declares pass identifier used by LLVM to identify pass. This allows LLVM
+to avoid using expensive C++ runtime information.
+
+.. code-block:: c++
+
+ bool runOnFunction(Function &F) override {
+ errs() << "Hello: ";
+ errs().write_escaped(F.getName()) << "\n";
+ return false;
+ }
+ }; // end of struct Hello
+ } // end of anonymous namespace
+
+We declare a :ref:`runOnFunction <writing-an-llvm-pass-runOnFunction>` method,
+which overrides an abstract virtual method inherited from :ref:`FunctionPass
+<writing-an-llvm-pass-FunctionPass>`. This is where we are supposed to do our
+thing, so we just print out our message with the name of each function.
+
+.. code-block:: c++
+
+ char Hello::ID = 0;
+
+We initialize pass ID here. LLVM uses ID's address to identify a pass, so
+initialization value is not important.
+
+.. code-block:: c++
+
+ static RegisterPass<Hello> X("hello", "Hello World Pass",
+ false /* Only looks at CFG */,
+ false /* Analysis Pass */);
+
+Lastly, we :ref:`register our class <writing-an-llvm-pass-registration>`
+``Hello``, giving it a command line argument "``hello``", and a name "Hello
+World Pass". The last two arguments describe its behavior: if a pass walks CFG
+without modifying it then the third argument is set to ``true``; if a pass is
+an analysis pass, for example dominator tree pass, then ``true`` is supplied as
+the fourth argument.
+
+As a whole, the ``.cpp`` file looks like:
+
+.. code-block:: c++
+
+ #include "llvm/Pass.h"
+ #include "llvm/IR/Function.h"
+ #include "llvm/Support/raw_ostream.h"
+
+ using namespace llvm;
+
+ namespace {
+ struct Hello : public FunctionPass {
+ static char ID;
+ Hello() : FunctionPass(ID) {}
+
+ bool runOnFunction(Function &F) override {
+ errs() << "Hello: ";
+ errs().write_escaped(F.getName()) << '\n';
+ return false;
+ }
+ };
+ }
+
+ char Hello::ID = 0;
+ static RegisterPass<Hello> X("hello", "Hello World Pass", false, false);
+
+Now that it's all together, compile the file with a simple "``gmake``" command
+in the local directory and you should get a new file
+"``Debug+Asserts/lib/Hello.so``" under the top level directory of the LLVM
+source tree (not in the local directory). Note that everything in this file is
+contained in an anonymous namespace --- this reflects the fact that passes
+are self contained units that do not need external interfaces (although they
+can have them) to be useful.
+
+Running a pass with ``opt``
+---------------------------
+
+Now that you have a brand new shiny shared object file, we can use the
+:program:`opt` command to run an LLVM program through your pass. Because you
+registered your pass with ``RegisterPass``, you will be able to use the
+:program:`opt` tool to access it, once loaded.
+
+To test it, follow the example at the end of the :doc:`GettingStarted` to
+compile "Hello World" to LLVM. We can now run the bitcode file (hello.bc) for
+the program through our transformation like this (or course, any bitcode file
+will work):
+
+.. code-block:: console
+
+ $ opt -load ../../../Debug+Asserts/lib/Hello.so -hello < hello.bc > /dev/null
+ Hello: __main
+ Hello: puts
+ Hello: main
+
+The :option:`-load` option specifies that :program:`opt` should load your pass
+as a shared object, which makes "``-hello``" a valid command line argument
+(which is one reason you need to :ref:`register your pass
+<writing-an-llvm-pass-registration>`). Because the Hello pass does not modify
+the program in any interesting way, we just throw away the result of
+:program:`opt` (sending it to ``/dev/null``).
+
+To see what happened to the other string you registered, try running
+:program:`opt` with the :option:`-help` option:
+
+.. code-block:: console
+
+ $ opt -load ../../../Debug+Asserts/lib/Hello.so -help
+ OVERVIEW: llvm .bc -> .bc modular optimizer
+
+ USAGE: opt [options] <input bitcode>
+
+ OPTIONS:
+ Optimizations available:
+ ...
+ -globalopt - Global Variable Optimizer
+ -globalsmodref-aa - Simple mod/ref analysis for globals
+ -gvn - Global Value Numbering
+ -hello - Hello World Pass
+ -indvars - Induction Variable Simplification
+ -inline - Function Integration/Inlining
+ ...
+
+The pass name gets added as the information string for your pass, giving some
+documentation to users of :program:`opt`. Now that you have a working pass,
+you would go ahead and make it do the cool transformations you want. Once you
+get it all working and tested, it may become useful to find out how fast your
+pass is. The :ref:`PassManager <writing-an-llvm-pass-passmanager>` provides a
+nice command line option (:option:`--time-passes`) that allows you to get
+information about the execution time of your pass along with the other passes
+you queue up. For example:
+
+.. code-block:: console
+
+ $ opt -load ../../../Debug+Asserts/lib/Hello.so -hello -time-passes < hello.bc > /dev/null
+ Hello: __main
+ Hello: puts
+ Hello: main
+ ===============================================================================
+ ... Pass execution timing report ...
+ ===============================================================================
+ Total Execution Time: 0.02 seconds (0.0479059 wall clock)
+
+ ---User Time--- --System Time-- --User+System-- ---Wall Time--- --- Pass Name ---
+ 0.0100 (100.0%) 0.0000 ( 0.0%) 0.0100 ( 50.0%) 0.0402 ( 84.0%) Bitcode Writer
+ 0.0000 ( 0.0%) 0.0100 (100.0%) 0.0100 ( 50.0%) 0.0031 ( 6.4%) Dominator Set Construction
+ 0.0000 ( 0.0%) 0.0000 ( 0.0%) 0.0000 ( 0.0%) 0.0013 ( 2.7%) Module Verifier
+ 0.0000 ( 0.0%) 0.0000 ( 0.0%) 0.0000 ( 0.0%) 0.0033 ( 6.9%) Hello World Pass
+ 0.0100 (100.0%) 0.0100 (100.0%) 0.0200 (100.0%) 0.0479 (100.0%) TOTAL
+
+As you can see, our implementation above is pretty fast. The additional
+passes listed are automatically inserted by the :program:`opt` tool to verify
+that the LLVM emitted by your pass is still valid and well formed LLVM, which
+hasn't been broken somehow.
+
+Now that you have seen the basics of the mechanics behind passes, we can talk
+about some more details of how they work and how to use them.
+
+.. _writing-an-llvm-pass-pass-classes:
+
+Pass classes and requirements
+=============================
+
+One of the first things that you should do when designing a new pass is to
+decide what class you should subclass for your pass. The :ref:`Hello World
+<writing-an-llvm-pass-basiccode>` example uses the :ref:`FunctionPass
+<writing-an-llvm-pass-FunctionPass>` class for its implementation, but we did
+not discuss why or when this should occur. Here we talk about the classes
+available, from the most general to the most specific.
+
+When choosing a superclass for your ``Pass``, you should choose the **most
+specific** class possible, while still being able to meet the requirements
+listed. This gives the LLVM Pass Infrastructure information necessary to
+optimize how passes are run, so that the resultant compiler isn't unnecessarily
+slow.
+
+The ``ImmutablePass`` class
+---------------------------
+
+The most plain and boring type of pass is the "`ImmutablePass
+<http://llvm.org/doxygen/classllvm_1_1ImmutablePass.html>`_" class. This pass
+type is used for passes that do not have to be run, do not change state, and
+never need to be updated. This is not a normal type of transformation or
+analysis, but can provide information about the current compiler configuration.
+
+Although this pass class is very infrequently used, it is important for
+providing information about the current target machine being compiled for, and
+other static information that can affect the various transformations.
+
+``ImmutablePass``\ es never invalidate other transformations, are never
+invalidated, and are never "run".
+
+.. _writing-an-llvm-pass-ModulePass:
+
+The ``ModulePass`` class
+------------------------
+
+The `ModulePass <http://llvm.org/doxygen/classllvm_1_1ModulePass.html>`_ class
+is the most general of all superclasses that you can use. Deriving from
+``ModulePass`` indicates that your pass uses the entire program as a unit,
+referring to function bodies in no predictable order, or adding and removing
+functions. Because nothing is known about the behavior of ``ModulePass``
+subclasses, no optimization can be done for their execution.
+
+A module pass can use function level passes (e.g. dominators) using the
+``getAnalysis`` interface ``getAnalysis<DominatorTree>(llvm::Function *)`` to
+provide the function to retrieve analysis result for, if the function pass does
+not require any module or immutable passes. Note that this can only be done
+for functions for which the analysis ran, e.g. in the case of dominators you
+should only ask for the ``DominatorTree`` for function definitions, not
+declarations.
+
+To write a correct ``ModulePass`` subclass, derive from ``ModulePass`` and
+overload the ``runOnModule`` method with the following signature:
+
+The ``runOnModule`` method
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. code-block:: c++
+
+ virtual bool runOnModule(Module &M) = 0;
+
+The ``runOnModule`` method performs the interesting work of the pass. It
+should return ``true`` if the module was modified by the transformation and
+``false`` otherwise.
+
+.. _writing-an-llvm-pass-CallGraphSCCPass:
+
+The ``CallGraphSCCPass`` class
+------------------------------
+
+The `CallGraphSCCPass
+<http://llvm.org/doxygen/classllvm_1_1CallGraphSCCPass.html>`_ is used by
+passes that need to traverse the program bottom-up on the call graph (callees
+before callers). Deriving from ``CallGraphSCCPass`` provides some mechanics
+for building and traversing the ``CallGraph``, but also allows the system to
+optimize execution of ``CallGraphSCCPass``\ es. If your pass meets the
+requirements outlined below, and doesn't meet the requirements of a
+:ref:`FunctionPass <writing-an-llvm-pass-FunctionPass>` or :ref:`BasicBlockPass
+<writing-an-llvm-pass-BasicBlockPass>`, you should derive from
+``CallGraphSCCPass``.
+
+``TODO``: explain briefly what SCC, Tarjan's algo, and B-U mean.
+
+To be explicit, CallGraphSCCPass subclasses are:
+
+#. ... *not allowed* to inspect or modify any ``Function``\ s other than those
+ in the current SCC and the direct callers and direct callees of the SCC.
+#. ... *required* to preserve the current ``CallGraph`` object, updating it to
+ reflect any changes made to the program.
+#. ... *not allowed* to add or remove SCC's from the current Module, though
+ they may change the contents of an SCC.
+#. ... *allowed* to add or remove global variables from the current Module.
+#. ... *allowed* to maintain state across invocations of :ref:`runOnSCC
+ <writing-an-llvm-pass-runOnSCC>` (including global data).
+
+Implementing a ``CallGraphSCCPass`` is slightly tricky in some cases because it
+has to handle SCCs with more than one node in it. All of the virtual methods
+described below should return ``true`` if they modified the program, or
+``false`` if they didn't.
+
+The ``doInitialization(CallGraph &)`` method
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. code-block:: c++
+
+ virtual bool doInitialization(CallGraph &CG);
+
+The ``doInitialization`` method is allowed to do most of the things that
+``CallGraphSCCPass``\ es are not allowed to do. They can add and remove
+functions, get pointers to functions, etc. The ``doInitialization`` method is
+designed to do simple initialization type of stuff that does not depend on the
+SCCs being processed. The ``doInitialization`` method call is not scheduled to
+overlap with any other pass executions (thus it should be very fast).
+
+.. _writing-an-llvm-pass-runOnSCC:
+
+The ``runOnSCC`` method
+^^^^^^^^^^^^^^^^^^^^^^^
+
+.. code-block:: c++
+
+ virtual bool runOnSCC(CallGraphSCC &SCC) = 0;
+
+The ``runOnSCC`` method performs the interesting work of the pass, and should
+return ``true`` if the module was modified by the transformation, ``false``
+otherwise.
+
+The ``doFinalization(CallGraph &)`` method
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. code-block:: c++
+
+ virtual bool doFinalization(CallGraph &CG);
+
+The ``doFinalization`` method is an infrequently used method that is called
+when the pass framework has finished calling :ref:`runOnSCC
+<writing-an-llvm-pass-runOnSCC>` for every SCC in the program being compiled.
+
+.. _writing-an-llvm-pass-FunctionPass:
+
+The ``FunctionPass`` class
+--------------------------
+
+In contrast to ``ModulePass`` subclasses, `FunctionPass
+<http://llvm.org/doxygen/classllvm_1_1Pass.html>`_ subclasses do have a
+predictable, local behavior that can be expected by the system. All
+``FunctionPass`` execute on each function in the program independent of all of
+the other functions in the program. ``FunctionPass``\ es do not require that
+they are executed in a particular order, and ``FunctionPass``\ es do not modify
+external functions.
+
+To be explicit, ``FunctionPass`` subclasses are not allowed to:
+
+#. Inspect or modify a ``Function`` other than the one currently being processed.
+#. Add or remove ``Function``\ s from the current ``Module``.
+#. Add or remove global variables from the current ``Module``.
+#. Maintain state across invocations of :ref:`runOnFunction
+ <writing-an-llvm-pass-runOnFunction>` (including global data).
+
+Implementing a ``FunctionPass`` is usually straightforward (See the :ref:`Hello
+World <writing-an-llvm-pass-basiccode>` pass for example).
+``FunctionPass``\ es may overload three virtual methods to do their work. All
+of these methods should return ``true`` if they modified the program, or
+``false`` if they didn't.
+
+.. _writing-an-llvm-pass-doInitialization-mod:
+
+The ``doInitialization(Module &)`` method
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. code-block:: c++
+
+ virtual bool doInitialization(Module &M);
+
+The ``doInitialization`` method is allowed to do most of the things that
+``FunctionPass``\ es are not allowed to do. They can add and remove functions,
+get pointers to functions, etc. The ``doInitialization`` method is designed to
+do simple initialization type of stuff that does not depend on the functions
+being processed. The ``doInitialization`` method call is not scheduled to
+overlap with any other pass executions (thus it should be very fast).
+
+A good example of how this method should be used is the `LowerAllocations
+<http://llvm.org/doxygen/LowerAllocations_8cpp-source.html>`_ pass. This pass
+converts ``malloc`` and ``free`` instructions into platform dependent
+``malloc()`` and ``free()`` function calls. It uses the ``doInitialization``
+method to get a reference to the ``malloc`` and ``free`` functions that it
+needs, adding prototypes to the module if necessary.
+
+.. _writing-an-llvm-pass-runOnFunction:
+
+The ``runOnFunction`` method
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. code-block:: c++
+
+ virtual bool runOnFunction(Function &F) = 0;
+
+The ``runOnFunction`` method must be implemented by your subclass to do the
+transformation or analysis work of your pass. As usual, a ``true`` value
+should be returned if the function is modified.
+
+.. _writing-an-llvm-pass-doFinalization-mod:
+
+The ``doFinalization(Module &)`` method
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. code-block:: c++
+
+ virtual bool doFinalization(Module &M);
+
+The ``doFinalization`` method is an infrequently used method that is called
+when the pass framework has finished calling :ref:`runOnFunction
+<writing-an-llvm-pass-runOnFunction>` for every function in the program being
+compiled.
+
+.. _writing-an-llvm-pass-LoopPass:
+
+The ``LoopPass`` class
+----------------------
+
+All ``LoopPass`` execute on each loop in the function independent of all of the
+other loops in the function. ``LoopPass`` processes loops in loop nest order
+such that outer most loop is processed last.
+
+``LoopPass`` subclasses are allowed to update loop nest using ``LPPassManager``
+interface. Implementing a loop pass is usually straightforward.
+``LoopPass``\ es may overload three virtual methods to do their work. All
+these methods should return ``true`` if they modified the program, or ``false``
+if they didn't.
+
+The ``doInitialization(Loop *, LPPassManager &)`` method
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. code-block:: c++
+
+ virtual bool doInitialization(Loop *, LPPassManager &LPM);
+
+The ``doInitialization`` method is designed to do simple initialization type of
+stuff that does not depend on the functions being processed. The
+``doInitialization`` method call is not scheduled to overlap with any other
+pass executions (thus it should be very fast). ``LPPassManager`` interface
+should be used to access ``Function`` or ``Module`` level analysis information.
+
+.. _writing-an-llvm-pass-runOnLoop:
+
+The ``runOnLoop`` method
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. code-block:: c++
+
+ virtual bool runOnLoop(Loop *, LPPassManager &LPM) = 0;
+
+The ``runOnLoop`` method must be implemented by your subclass to do the
+transformation or analysis work of your pass. As usual, a ``true`` value
+should be returned if the function is modified. ``LPPassManager`` interface
+should be used to update loop nest.
+
+The ``doFinalization()`` method
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. code-block:: c++
+
+ virtual bool doFinalization();
+
+The ``doFinalization`` method is an infrequently used method that is called
+when the pass framework has finished calling :ref:`runOnLoop
+<writing-an-llvm-pass-runOnLoop>` for every loop in the program being compiled.
+
+.. _writing-an-llvm-pass-RegionPass:
+
+The ``RegionPass`` class
+------------------------
+
+``RegionPass`` is similar to :ref:`LoopPass <writing-an-llvm-pass-LoopPass>`,
+but executes on each single entry single exit region in the function.
+``RegionPass`` processes regions in nested order such that the outer most
+region is processed last.
+
+``RegionPass`` subclasses are allowed to update the region tree by using the
+``RGPassManager`` interface. You may overload three virtual methods of
+``RegionPass`` to implement your own region pass. All these methods should
+return ``true`` if they modified the program, or ``false`` if they did not.
+
+The ``doInitialization(Region *, RGPassManager &)`` method
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. code-block:: c++
+
+ virtual bool doInitialization(Region *, RGPassManager &RGM);
+
+The ``doInitialization`` method is designed to do simple initialization type of
+stuff that does not depend on the functions being processed. The
+``doInitialization`` method call is not scheduled to overlap with any other
+pass executions (thus it should be very fast). ``RPPassManager`` interface
+should be used to access ``Function`` or ``Module`` level analysis information.
+
+.. _writing-an-llvm-pass-runOnRegion:
+
+The ``runOnRegion`` method
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. code-block:: c++
+
+ virtual bool runOnRegion(Region *, RGPassManager &RGM) = 0;
+
+The ``runOnRegion`` method must be implemented by your subclass to do the
+transformation or analysis work of your pass. As usual, a true value should be
+returned if the region is modified. ``RGPassManager`` interface should be used to
+update region tree.
+
+The ``doFinalization()`` method
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. code-block:: c++
+
+ virtual bool doFinalization();
+
+The ``doFinalization`` method is an infrequently used method that is called
+when the pass framework has finished calling :ref:`runOnRegion
+<writing-an-llvm-pass-runOnRegion>` for every region in the program being
+compiled.
+
+.. _writing-an-llvm-pass-BasicBlockPass:
+
+The ``BasicBlockPass`` class
+----------------------------
+
+``BasicBlockPass``\ es are just like :ref:`FunctionPass's
+<writing-an-llvm-pass-FunctionPass>` , except that they must limit their scope
+of inspection and modification to a single basic block at a time. As such,
+they are **not** allowed to do any of the following:
+
+#. Modify or inspect any basic blocks outside of the current one.
+#. Maintain state across invocations of :ref:`runOnBasicBlock
+ <writing-an-llvm-pass-runOnBasicBlock>`.
+#. Modify the control flow graph (by altering terminator instructions)
+#. Any of the things forbidden for :ref:`FunctionPasses
+ <writing-an-llvm-pass-FunctionPass>`.
+
+``BasicBlockPass``\ es are useful for traditional local and "peephole"
+optimizations. They may override the same :ref:`doInitialization(Module &)
+<writing-an-llvm-pass-doInitialization-mod>` and :ref:`doFinalization(Module &)
+<writing-an-llvm-pass-doFinalization-mod>` methods that :ref:`FunctionPass's
+<writing-an-llvm-pass-FunctionPass>` have, but also have the following virtual
+methods that may also be implemented:
+
+The ``doInitialization(Function &)`` method
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. code-block:: c++
+
+ virtual bool doInitialization(Function &F);
+
+The ``doInitialization`` method is allowed to do most of the things that
+``BasicBlockPass``\ es are not allowed to do, but that ``FunctionPass``\ es
+can. The ``doInitialization`` method is designed to do simple initialization
+that does not depend on the ``BasicBlock``\ s being processed. The
+``doInitialization`` method call is not scheduled to overlap with any other
+pass executions (thus it should be very fast).
+
+.. _writing-an-llvm-pass-runOnBasicBlock:
+
+The ``runOnBasicBlock`` method
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. code-block:: c++
+
+ virtual bool runOnBasicBlock(BasicBlock &BB) = 0;
+
+Override this function to do the work of the ``BasicBlockPass``. This function
+is not allowed to inspect or modify basic blocks other than the parameter, and
+are not allowed to modify the CFG. A ``true`` value must be returned if the
+basic block is modified.
+
+The ``doFinalization(Function &)`` method
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. code-block:: c++
+
+ virtual bool doFinalization(Function &F);
+
+The ``doFinalization`` method is an infrequently used method that is called
+when the pass framework has finished calling :ref:`runOnBasicBlock
+<writing-an-llvm-pass-runOnBasicBlock>` for every ``BasicBlock`` in the program
+being compiled. This can be used to perform per-function finalization.
+
+The ``MachineFunctionPass`` class
+---------------------------------
+
+A ``MachineFunctionPass`` is a part of the LLVM code generator that executes on
+the machine-dependent representation of each LLVM function in the program.
+
+Code generator passes are registered and initialized specially by
+``TargetMachine::addPassesToEmitFile`` and similar routines, so they cannot
+generally be run from the :program:`opt` or :program:`bugpoint` commands.
+
+A ``MachineFunctionPass`` is also a ``FunctionPass``, so all the restrictions
+that apply to a ``FunctionPass`` also apply to it. ``MachineFunctionPass``\ es
+also have additional restrictions. In particular, ``MachineFunctionPass``\ es
+are not allowed to do any of the following:
+
+#. Modify or create any LLVM IR ``Instruction``\ s, ``BasicBlock``\ s,
+ ``Argument``\ s, ``Function``\ s, ``GlobalVariable``\ s,
+ ``GlobalAlias``\ es, or ``Module``\ s.
+#. Modify a ``MachineFunction`` other than the one currently being processed.
+#. Maintain state across invocations of :ref:`runOnMachineFunction
+ <writing-an-llvm-pass-runOnMachineFunction>` (including global data).
+
+.. _writing-an-llvm-pass-runOnMachineFunction:
+
+The ``runOnMachineFunction(MachineFunction &MF)`` method
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. code-block:: c++
+
+ virtual bool runOnMachineFunction(MachineFunction &MF) = 0;
+
+``runOnMachineFunction`` can be considered the main entry point of a
+``MachineFunctionPass``; that is, you should override this method to do the
+work of your ``MachineFunctionPass``.
+
+The ``runOnMachineFunction`` method is called on every ``MachineFunction`` in a
+``Module``, so that the ``MachineFunctionPass`` may perform optimizations on
+the machine-dependent representation of the function. If you want to get at
+the LLVM ``Function`` for the ``MachineFunction`` you're working on, use
+``MachineFunction``'s ``getFunction()`` accessor method --- but remember, you
+may not modify the LLVM ``Function`` or its contents from a
+``MachineFunctionPass``.
+
+.. _writing-an-llvm-pass-registration:
+
+Pass registration
+-----------------
+
+In the :ref:`Hello World <writing-an-llvm-pass-basiccode>` example pass we
+illustrated how pass registration works, and discussed some of the reasons that
+it is used and what it does. Here we discuss how and why passes are
+registered.
+
+As we saw above, passes are registered with the ``RegisterPass`` template. The
+template parameter is the name of the pass that is to be used on the command
+line to specify that the pass should be added to a program (for example, with
+:program:`opt` or :program:`bugpoint`). The first argument is the name of the
+pass, which is to be used for the :option:`-help` output of programs, as well
+as for debug output generated by the :option:`--debug-pass` option.
+
+If you want your pass to be easily dumpable, you should implement the virtual
+print method:
+
+The ``print`` method
+^^^^^^^^^^^^^^^^^^^^
+
+.. code-block:: c++
+
+ virtual void print(llvm::raw_ostream &O, const Module *M) const;
+
+The ``print`` method must be implemented by "analyses" in order to print a
+human readable version of the analysis results. This is useful for debugging
+an analysis itself, as well as for other people to figure out how an analysis
+works. Use the opt ``-analyze`` argument to invoke this method.
+
+The ``llvm::raw_ostream`` parameter specifies the stream to write the results
+on, and the ``Module`` parameter gives a pointer to the top level module of the
+program that has been analyzed. Note however that this pointer may be ``NULL``
+in certain circumstances (such as calling the ``Pass::dump()`` from a
+debugger), so it should only be used to enhance debug output, it should not be
+depended on.
+
+.. _writing-an-llvm-pass-interaction:
+
+Specifying interactions between passes
+--------------------------------------
+
+One of the main responsibilities of the ``PassManager`` is to make sure that
+passes interact with each other correctly. Because ``PassManager`` tries to
+:ref:`optimize the execution of passes <writing-an-llvm-pass-passmanager>` it
+must know how the passes interact with each other and what dependencies exist
+between the various passes. To track this, each pass can declare the set of
+passes that are required to be executed before the current pass, and the passes
+which are invalidated by the current pass.
+
+Typically this functionality is used to require that analysis results are
+computed before your pass is run. Running arbitrary transformation passes can
+invalidate the computed analysis results, which is what the invalidation set
+specifies. If a pass does not implement the :ref:`getAnalysisUsage
+<writing-an-llvm-pass-getAnalysisUsage>` method, it defaults to not having any
+prerequisite passes, and invalidating **all** other passes.
+
+.. _writing-an-llvm-pass-getAnalysisUsage:
+
+The ``getAnalysisUsage`` method
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. code-block:: c++
+
+ virtual void getAnalysisUsage(AnalysisUsage &Info) const;
+
+By implementing the ``getAnalysisUsage`` method, the required and invalidated
+sets may be specified for your transformation. The implementation should fill
+in the `AnalysisUsage
+<http://llvm.org/doxygen/classllvm_1_1AnalysisUsage.html>`_ object with
+information about which passes are required and not invalidated. To do this, a
+pass may call any of the following methods on the ``AnalysisUsage`` object:
+
+The ``AnalysisUsage::addRequired<>`` and ``AnalysisUsage::addRequiredTransitive<>`` methods
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+If your pass requires a previous pass to be executed (an analysis for example),
+it can use one of these methods to arrange for it to be run before your pass.
+LLVM has many different types of analyses and passes that can be required,
+spanning the range from ``DominatorSet`` to ``BreakCriticalEdges``. Requiring
+``BreakCriticalEdges``, for example, guarantees that there will be no critical
+edges in the CFG when your pass has been run.
+
+Some analyses chain to other analyses to do their job. For example, an
+`AliasAnalysis <AliasAnalysis>` implementation is required to :ref:`chain
+<aliasanalysis-chaining>` to other alias analysis passes. In cases where
+analyses chain, the ``addRequiredTransitive`` method should be used instead of
+the ``addRequired`` method. This informs the ``PassManager`` that the
+transitively required pass should be alive as long as the requiring pass is.
+
+The ``AnalysisUsage::addPreserved<>`` method
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+One of the jobs of the ``PassManager`` is to optimize how and when analyses are
+run. In particular, it attempts to avoid recomputing data unless it needs to.
+For this reason, passes are allowed to declare that they preserve (i.e., they
+don't invalidate) an existing analysis if it's available. For example, a
+simple constant folding pass would not modify the CFG, so it can't possibly
+affect the results of dominator analysis. By default, all passes are assumed
+to invalidate all others.
+
+The ``AnalysisUsage`` class provides several methods which are useful in
+certain circumstances that are related to ``addPreserved``. In particular, the
+``setPreservesAll`` method can be called to indicate that the pass does not
+modify the LLVM program at all (which is true for analyses), and the
+``setPreservesCFG`` method can be used by transformations that change
+instructions in the program but do not modify the CFG or terminator
+instructions (note that this property is implicitly set for
+:ref:`BasicBlockPass <writing-an-llvm-pass-BasicBlockPass>`\ es).
+
+``addPreserved`` is particularly useful for transformations like
+``BreakCriticalEdges``. This pass knows how to update a small set of loop and
+dominator related analyses if they exist, so it can preserve them, despite the
+fact that it hacks on the CFG.
+
+Example implementations of ``getAnalysisUsage``
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. code-block:: c++
+
+ // This example modifies the program, but does not modify the CFG
+ void LICM::getAnalysisUsage(AnalysisUsage &AU) const {
+ AU.setPreservesCFG();
+ AU.addRequired<LoopInfo>();
+ }
+
+.. _writing-an-llvm-pass-getAnalysis:
+
+The ``getAnalysis<>`` and ``getAnalysisIfAvailable<>`` methods
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The ``Pass::getAnalysis<>`` method is automatically inherited by your class,
+providing you with access to the passes that you declared that you required
+with the :ref:`getAnalysisUsage <writing-an-llvm-pass-getAnalysisUsage>`
+method. It takes a single template argument that specifies which pass class
+you want, and returns a reference to that pass. For example:
+
+.. code-block:: c++
+
+ bool LICM::runOnFunction(Function &F) {
+ LoopInfo &LI = getAnalysis<LoopInfo>();
+ //...
+ }
+
+This method call returns a reference to the pass desired. You may get a
+runtime assertion failure if you attempt to get an analysis that you did not
+declare as required in your :ref:`getAnalysisUsage
+<writing-an-llvm-pass-getAnalysisUsage>` implementation. This method can be
+called by your ``run*`` method implementation, or by any other local method
+invoked by your ``run*`` method.
+
+A module level pass can use function level analysis info using this interface.
+For example:
+
+.. code-block:: c++
+
+ bool ModuleLevelPass::runOnModule(Module &M) {
+ //...
+ DominatorTree &DT = getAnalysis<DominatorTree>(Func);
+ //...
+ }
+
+In above example, ``runOnFunction`` for ``DominatorTree`` is called by pass
+manager before returning a reference to the desired pass.
+
+If your pass is capable of updating analyses if they exist (e.g.,
+``BreakCriticalEdges``, as described above), you can use the
+``getAnalysisIfAvailable`` method, which returns a pointer to the analysis if
+it is active. For example:
+
+.. code-block:: c++
+
+ if (DominatorSet *DS = getAnalysisIfAvailable<DominatorSet>()) {
+ // A DominatorSet is active. This code will update it.
+ }
+
+Implementing Analysis Groups
+----------------------------
+
+Now that we understand the basics of how passes are defined, how they are used,
+and how they are required from other passes, it's time to get a little bit
+fancier. All of the pass relationships that we have seen so far are very
+simple: one pass depends on one other specific pass to be run before it can
+run. For many applications, this is great, for others, more flexibility is
+required.
+
+In particular, some analyses are defined such that there is a single simple
+interface to the analysis results, but multiple ways of calculating them.
+Consider alias analysis for example. The most trivial alias analysis returns
+"may alias" for any alias query. The most sophisticated analysis a
+flow-sensitive, context-sensitive interprocedural analysis that can take a
+significant amount of time to execute (and obviously, there is a lot of room
+between these two extremes for other implementations). To cleanly support
+situations like this, the LLVM Pass Infrastructure supports the notion of
+Analysis Groups.
+
+Analysis Group Concepts
+^^^^^^^^^^^^^^^^^^^^^^^
+
+An Analysis Group is a single simple interface that may be implemented by
+multiple different passes. Analysis Groups can be given human readable names
+just like passes, but unlike passes, they need not derive from the ``Pass``
+class. An analysis group may have one or more implementations, one of which is
+the "default" implementation.
+
+Analysis groups are used by client passes just like other passes are: the
+``AnalysisUsage::addRequired()`` and ``Pass::getAnalysis()`` methods. In order
+to resolve this requirement, the :ref:`PassManager
+<writing-an-llvm-pass-passmanager>` scans the available passes to see if any
+implementations of the analysis group are available. If none is available, the
+default implementation is created for the pass to use. All standard rules for
+:ref:`interaction between passes <writing-an-llvm-pass-interaction>` still
+apply.
+
+Although :ref:`Pass Registration <writing-an-llvm-pass-registration>` is
+optional for normal passes, all analysis group implementations must be
+registered, and must use the :ref:`INITIALIZE_AG_PASS
+<writing-an-llvm-pass-RegisterAnalysisGroup>` template to join the
+implementation pool. Also, a default implementation of the interface **must**
+be registered with :ref:`RegisterAnalysisGroup
+<writing-an-llvm-pass-RegisterAnalysisGroup>`.
+
+As a concrete example of an Analysis Group in action, consider the
+`AliasAnalysis <http://llvm.org/doxygen/classllvm_1_1AliasAnalysis.html>`_
+analysis group. The default implementation of the alias analysis interface
+(the `basicaa <http://llvm.org/doxygen/structBasicAliasAnalysis.html>`_ pass)
+just does a few simple checks that don't require significant analysis to
+compute (such as: two different globals can never alias each other, etc).
+Passes that use the `AliasAnalysis
+<http://llvm.org/doxygen/classllvm_1_1AliasAnalysis.html>`_ interface (for
+example the `gcse <http://llvm.org/doxygen/structGCSE.html>`_ pass), do not
+care which implementation of alias analysis is actually provided, they just use
+the designated interface.
+
+From the user's perspective, commands work just like normal. Issuing the
+command ``opt -gcse ...`` will cause the ``basicaa`` class to be instantiated
+and added to the pass sequence. Issuing the command ``opt -somefancyaa -gcse
+...`` will cause the ``gcse`` pass to use the ``somefancyaa`` alias analysis
+(which doesn't actually exist, it's just a hypothetical example) instead.
+
+.. _writing-an-llvm-pass-RegisterAnalysisGroup:
+
+Using ``RegisterAnalysisGroup``
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The ``RegisterAnalysisGroup`` template is used to register the analysis group
+itself, while the ``INITIALIZE_AG_PASS`` is used to add pass implementations to
+the analysis group. First, an analysis group should be registered, with a
+human readable name provided for it. Unlike registration of passes, there is
+no command line argument to be specified for the Analysis Group Interface
+itself, because it is "abstract":
+
+.. code-block:: c++
+
+ static RegisterAnalysisGroup<AliasAnalysis> A("Alias Analysis");
+
+Once the analysis is registered, passes can declare that they are valid
+implementations of the interface by using the following code:
+
+.. code-block:: c++
+
+ namespace {
+ // Declare that we implement the AliasAnalysis interface
+ INITIALIZE_AG_PASS(FancyAA, AliasAnalysis , "somefancyaa",
+ "A more complex alias analysis implementation",
+ false, // Is CFG Only?
+ true, // Is Analysis?
+ false); // Is default Analysis Group implementation?
+ }
+
+This just shows a class ``FancyAA`` that uses the ``INITIALIZE_AG_PASS`` macro
+both to register and to "join" the `AliasAnalysis
+<http://llvm.org/doxygen/classllvm_1_1AliasAnalysis.html>`_ analysis group.
+Every implementation of an analysis group should join using this macro.
+
+.. code-block:: c++
+
+ namespace {
+ // Declare that we implement the AliasAnalysis interface
+ INITIALIZE_AG_PASS(BasicAA, AliasAnalysis, "basicaa",
+ "Basic Alias Analysis (default AA impl)",
+ false, // Is CFG Only?
+ true, // Is Analysis?
+ true); // Is default Analysis Group implementation?
+ }
+
+Here we show how the default implementation is specified (using the final
+argument to the ``INITIALIZE_AG_PASS`` template). There must be exactly one
+default implementation available at all times for an Analysis Group to be used.
+Only default implementation can derive from ``ImmutablePass``. Here we declare
+that the `BasicAliasAnalysis
+<http://llvm.org/doxygen/structBasicAliasAnalysis.html>`_ pass is the default
+implementation for the interface.
+
+Pass Statistics
+===============
+
+The `Statistic <http://llvm.org/doxygen/Statistic_8h-source.html>`_ class is
+designed to be an easy way to expose various success metrics from passes.
+These statistics are printed at the end of a run, when the :option:`-stats`
+command line option is enabled on the command line. See the :ref:`Statistics
+section <Statistic>` in the Programmer's Manual for details.
+
+.. _writing-an-llvm-pass-passmanager:
+
+What PassManager does
+---------------------
+
+The `PassManager <http://llvm.org/doxygen/PassManager_8h-source.html>`_ `class
+<http://llvm.org/doxygen/classllvm_1_1PassManager.html>`_ takes a list of
+passes, ensures their :ref:`prerequisites <writing-an-llvm-pass-interaction>`
+are set up correctly, and then schedules passes to run efficiently. All of the
+LLVM tools that run passes use the PassManager for execution of these passes.
+
+The PassManager does two main things to try to reduce the execution time of a
+series of passes:
+
+#. **Share analysis results.** The ``PassManager`` attempts to avoid
+ recomputing analysis results as much as possible. This means keeping track
+ of which analyses are available already, which analyses get invalidated, and
+ which analyses are needed to be run for a pass. An important part of work
+ is that the ``PassManager`` tracks the exact lifetime of all analysis
+ results, allowing it to :ref:`free memory
+ <writing-an-llvm-pass-releaseMemory>` allocated to holding analysis results
+ as soon as they are no longer needed.
+
+#. **Pipeline the execution of passes on the program.** The ``PassManager``
+ attempts to get better cache and memory usage behavior out of a series of
+ passes by pipelining the passes together. This means that, given a series
+ of consecutive :ref:`FunctionPass <writing-an-llvm-pass-FunctionPass>`, it
+ will execute all of the :ref:`FunctionPass
+ <writing-an-llvm-pass-FunctionPass>` on the first function, then all of the
+ :ref:`FunctionPasses <writing-an-llvm-pass-FunctionPass>` on the second
+ function, etc... until the entire program has been run through the passes.
+
+ This improves the cache behavior of the compiler, because it is only
+ touching the LLVM program representation for a single function at a time,
+ instead of traversing the entire program. It reduces the memory consumption
+ of compiler, because, for example, only one `DominatorSet
+ <http://llvm.org/doxygen/classllvm_1_1DominatorSet.html>`_ needs to be
+ calculated at a time. This also makes it possible to implement some
+ :ref:`interesting enhancements <writing-an-llvm-pass-SMP>` in the future.
+
+The effectiveness of the ``PassManager`` is influenced directly by how much
+information it has about the behaviors of the passes it is scheduling. For
+example, the "preserved" set is intentionally conservative in the face of an
+unimplemented :ref:`getAnalysisUsage <writing-an-llvm-pass-getAnalysisUsage>`
+method. Not implementing when it should be implemented will have the effect of
+not allowing any analysis results to live across the execution of your pass.
+
+The ``PassManager`` class exposes a ``--debug-pass`` command line options that
+is useful for debugging pass execution, seeing how things work, and diagnosing
+when you should be preserving more analyses than you currently are. (To get
+information about all of the variants of the ``--debug-pass`` option, just type
+"``opt -help-hidden``").
+
+By using the --debug-pass=Structure option, for example, we can see how our
+:ref:`Hello World <writing-an-llvm-pass-basiccode>` pass interacts with other
+passes. Lets try it out with the gcse and licm passes:
+
+.. code-block:: console
+
+ $ opt -load ../../../Debug+Asserts/lib/Hello.so -gcse -licm --debug-pass=Structure < hello.bc > /dev/null
+ Module Pass Manager
+ Function Pass Manager
+ Dominator Set Construction
+ Immediate Dominators Construction
+ Global Common Subexpression Elimination
+ -- Immediate Dominators Construction
+ -- Global Common Subexpression Elimination
+ Natural Loop Construction
+ Loop Invariant Code Motion
+ -- Natural Loop Construction
+ -- Loop Invariant Code Motion
+ Module Verifier
+ -- Dominator Set Construction
+ -- Module Verifier
+ Bitcode Writer
+ --Bitcode Writer
+
+This output shows us when passes are constructed and when the analysis results
+are known to be dead (prefixed with "``--``"). Here we see that GCSE uses
+dominator and immediate dominator information to do its job. The LICM pass
+uses natural loop information, which uses dominator sets, but not immediate
+dominators. Because immediate dominators are no longer useful after the GCSE
+pass, it is immediately destroyed. The dominator sets are then reused to
+compute natural loop information, which is then used by the LICM pass.
+
+After the LICM pass, the module verifier runs (which is automatically added by
+the :program:`opt` tool), which uses the dominator set to check that the
+resultant LLVM code is well formed. After it finishes, the dominator set
+information is destroyed, after being computed once, and shared by three
+passes.
+
+Lets see how this changes when we run the :ref:`Hello World
+<writing-an-llvm-pass-basiccode>` pass in between the two passes:
+
+.. code-block:: console
+
+ $ opt -load ../../../Debug+Asserts/lib/Hello.so -gcse -hello -licm --debug-pass=Structure < hello.bc > /dev/null
+ Module Pass Manager
+ Function Pass Manager
+ Dominator Set Construction
+ Immediate Dominators Construction
+ Global Common Subexpression Elimination
+ -- Dominator Set Construction
+ -- Immediate Dominators Construction
+ -- Global Common Subexpression Elimination
+ Hello World Pass
+ -- Hello World Pass
+ Dominator Set Construction
+ Natural Loop Construction
+ Loop Invariant Code Motion
+ -- Natural Loop Construction
+ -- Loop Invariant Code Motion
+ Module Verifier
+ -- Dominator Set Construction
+ -- Module Verifier
+ Bitcode Writer
+ --Bitcode Writer
+ Hello: __main
+ Hello: puts
+ Hello: main
+
+Here we see that the :ref:`Hello World <writing-an-llvm-pass-basiccode>` pass
+has killed the Dominator Set pass, even though it doesn't modify the code at
+all! To fix this, we need to add the following :ref:`getAnalysisUsage
+<writing-an-llvm-pass-getAnalysisUsage>` method to our pass:
+
+.. code-block:: c++
+
+ // We don't modify the program, so we preserve all analyses
+ void getAnalysisUsage(AnalysisUsage &AU) const override {
+ AU.setPreservesAll();
+ }
+
+Now when we run our pass, we get this output:
+
+.. code-block:: console
+
+ $ opt -load ../../../Debug+Asserts/lib/Hello.so -gcse -hello -licm --debug-pass=Structure < hello.bc > /dev/null
+ Pass Arguments: -gcse -hello -licm
+ Module Pass Manager
+ Function Pass Manager
+ Dominator Set Construction
+ Immediate Dominators Construction
+ Global Common Subexpression Elimination
+ -- Immediate Dominators Construction
+ -- Global Common Subexpression Elimination
+ Hello World Pass
+ -- Hello World Pass
+ Natural Loop Construction
+ Loop Invariant Code Motion
+ -- Loop Invariant Code Motion
+ -- Natural Loop Construction
+ Module Verifier
+ -- Dominator Set Construction
+ -- Module Verifier
+ Bitcode Writer
+ --Bitcode Writer
+ Hello: __main
+ Hello: puts
+ Hello: main
+
+Which shows that we don't accidentally invalidate dominator information
+anymore, and therefore do not have to compute it twice.
+
+.. _writing-an-llvm-pass-releaseMemory:
+
+The ``releaseMemory`` method
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. code-block:: c++
+
+ virtual void releaseMemory();
+
+The ``PassManager`` automatically determines when to compute analysis results,
+and how long to keep them around for. Because the lifetime of the pass object
+itself is effectively the entire duration of the compilation process, we need
+some way to free analysis results when they are no longer useful. The
+``releaseMemory`` virtual method is the way to do this.
+
+If you are writing an analysis or any other pass that retains a significant
+amount of state (for use by another pass which "requires" your pass and uses
+the :ref:`getAnalysis <writing-an-llvm-pass-getAnalysis>` method) you should
+implement ``releaseMemory`` to, well, release the memory allocated to maintain
+this internal state. This method is called after the ``run*`` method for the
+class, before the next call of ``run*`` in your pass.
+
+Registering dynamically loaded passes
+=====================================
+
+*Size matters* when constructing production quality tools using LLVM, both for
+the purposes of distribution, and for regulating the resident code size when
+running on the target system. Therefore, it becomes desirable to selectively
+use some passes, while omitting others and maintain the flexibility to change
+configurations later on. You want to be able to do all this, and, provide
+feedback to the user. This is where pass registration comes into play.
+
+The fundamental mechanisms for pass registration are the
+``MachinePassRegistry`` class and subclasses of ``MachinePassRegistryNode``.
+
+An instance of ``MachinePassRegistry`` is used to maintain a list of
+``MachinePassRegistryNode`` objects. This instance maintains the list and
+communicates additions and deletions to the command line interface.
+
+An instance of ``MachinePassRegistryNode`` subclass is used to maintain
+information provided about a particular pass. This information includes the
+command line name, the command help string and the address of the function used
+to create an instance of the pass. A global static constructor of one of these
+instances *registers* with a corresponding ``MachinePassRegistry``, the static
+destructor *unregisters*. Thus a pass that is statically linked in the tool
+will be registered at start up. A dynamically loaded pass will register on
+load and unregister at unload.
+
+Using existing registries
+-------------------------
+
+There are predefined registries to track instruction scheduling
+(``RegisterScheduler``) and register allocation (``RegisterRegAlloc``) machine
+passes. Here we will describe how to *register* a register allocator machine
+pass.
+
+Implement your register allocator machine pass. In your register allocator
+``.cpp`` file add the following include:
+
+.. code-block:: c++
+
+ #include "llvm/CodeGen/RegAllocRegistry.h"
+
+Also in your register allocator ``.cpp`` file, define a creator function in the
+form:
+
+.. code-block:: c++
+
+ FunctionPass *createMyRegisterAllocator() {
+ return new MyRegisterAllocator();
+ }
+
+Note that the signature of this function should match the type of
+``RegisterRegAlloc::FunctionPassCtor``. In the same file add the "installing"
+declaration, in the form:
+
+.. code-block:: c++
+
+ static RegisterRegAlloc myRegAlloc("myregalloc",
+ "my register allocator help string",
+ createMyRegisterAllocator);
+
+Note the two spaces prior to the help string produces a tidy result on the
+:option:`-help` query.
+
+.. code-block:: console
+
+ $ llc -help
+ ...
+ -regalloc - Register allocator to use (default=linearscan)
+ =linearscan - linear scan register allocator
+ =local - local register allocator
+ =simple - simple register allocator
+ =myregalloc - my register allocator help string
+ ...
+
+And that's it. The user is now free to use ``-regalloc=myregalloc`` as an
+option. Registering instruction schedulers is similar except use the
+``RegisterScheduler`` class. Note that the
+``RegisterScheduler::FunctionPassCtor`` is significantly different from
+``RegisterRegAlloc::FunctionPassCtor``.
+
+To force the load/linking of your register allocator into the
+:program:`llc`/:program:`lli` tools, add your creator function's global
+declaration to ``Passes.h`` and add a "pseudo" call line to
+``llvm/Codegen/LinkAllCodegenComponents.h``.
+
+Creating new registries
+-----------------------
+
+The easiest way to get started is to clone one of the existing registries; we
+recommend ``llvm/CodeGen/RegAllocRegistry.h``. The key things to modify are
+the class name and the ``FunctionPassCtor`` type.
+
+Then you need to declare the registry. Example: if your pass registry is
+``RegisterMyPasses`` then define:
+
+.. code-block:: c++
+
+ MachinePassRegistry RegisterMyPasses::Registry;
+
+And finally, declare the command line option for your passes. Example:
+
+.. code-block:: c++
+
+ cl::opt<RegisterMyPasses::FunctionPassCtor, false,
+ RegisterPassParser<RegisterMyPasses> >
+ MyPassOpt("mypass",
+ cl::init(&createDefaultMyPass),
+ cl::desc("my pass option help"));
+
+Here the command option is "``mypass``", with ``createDefaultMyPass`` as the
+default creator.
+
+Using GDB with dynamically loaded passes
+----------------------------------------
+
+Unfortunately, using GDB with dynamically loaded passes is not as easy as it
+should be. First of all, you can't set a breakpoint in a shared object that
+has not been loaded yet, and second of all there are problems with inlined
+functions in shared objects. Here are some suggestions to debugging your pass
+with GDB.
+
+For sake of discussion, I'm going to assume that you are debugging a
+transformation invoked by :program:`opt`, although nothing described here
+depends on that.
+
+Setting a breakpoint in your pass
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+First thing you do is start gdb on the opt process:
+
+.. code-block:: console
+
+ $ gdb opt
+ GNU gdb 5.0
+ Copyright 2000 Free Software Foundation, Inc.
+ GDB is free software, covered by the GNU General Public License, and you are
+ welcome to change it and/or distribute copies of it under certain conditions.
+ Type "show copying" to see the conditions.
+ There is absolutely no warranty for GDB. Type "show warranty" for details.
+ This GDB was configured as "sparc-sun-solaris2.6"...
+ (gdb)
+
+Note that :program:`opt` has a lot of debugging information in it, so it takes
+time to load. Be patient. Since we cannot set a breakpoint in our pass yet
+(the shared object isn't loaded until runtime), we must execute the process,
+and have it stop before it invokes our pass, but after it has loaded the shared
+object. The most foolproof way of doing this is to set a breakpoint in
+``PassManager::run`` and then run the process with the arguments you want:
+
+.. code-block:: console
+
+ $ (gdb) break llvm::PassManager::run
+ Breakpoint 1 at 0x2413bc: file Pass.cpp, line 70.
+ (gdb) run test.bc -load $(LLVMTOP)/llvm/Debug+Asserts/lib/[libname].so -[passoption]
+ Starting program: opt test.bc -load $(LLVMTOP)/llvm/Debug+Asserts/lib/[libname].so -[passoption]
+ Breakpoint 1, PassManager::run (this=0xffbef174, M=@0x70b298) at Pass.cpp:70
+ 70 bool PassManager::run(Module &M) { return PM->run(M); }
+ (gdb)
+
+Once the :program:`opt` stops in the ``PassManager::run`` method you are now
+free to set breakpoints in your pass so that you can trace through execution or
+do other standard debugging stuff.
+
+Miscellaneous Problems
+^^^^^^^^^^^^^^^^^^^^^^
+
+Once you have the basics down, there are a couple of problems that GDB has,
+some with solutions, some without.
+
+* Inline functions have bogus stack information. In general, GDB does a pretty
+ good job getting stack traces and stepping through inline functions. When a
+ pass is dynamically loaded however, it somehow completely loses this
+ capability. The only solution I know of is to de-inline a function (move it
+ from the body of a class to a ``.cpp`` file).
+
+* Restarting the program breaks breakpoints. After following the information
+ above, you have succeeded in getting some breakpoints planted in your pass.
+ Nex thing you know, you restart the program (i.e., you type "``run``" again),
+ and you start getting errors about breakpoints being unsettable. The only
+ way I have found to "fix" this problem is to delete the breakpoints that are
+ already set in your pass, run the program, and re-set the breakpoints once
+ execution stops in ``PassManager::run``.
+
+Hopefully these tips will help with common case debugging situations. If you'd
+like to contribute some tips of your own, just contact `Chris
+<mailto:sabre at nondot.org>`_.
+
+Future extensions planned
+-------------------------
+
+Although the LLVM Pass Infrastructure is very capable as it stands, and does
+some nifty stuff, there are things we'd like to add in the future. Here is
+where we are going:
+
+.. _writing-an-llvm-pass-SMP:
+
+Multithreaded LLVM
+^^^^^^^^^^^^^^^^^^
+
+Multiple CPU machines are becoming more common and compilation can never be
+fast enough: obviously we should allow for a multithreaded compiler. Because
+of the semantics defined for passes above (specifically they cannot maintain
+state across invocations of their ``run*`` methods), a nice clean way to
+implement a multithreaded compiler would be for the ``PassManager`` class to
+create multiple instances of each pass object, and allow the separate instances
+to be hacking on different parts of the program at the same time.
+
+This implementation would prevent each of the passes from having to implement
+multithreaded constructs, requiring only the LLVM core to have locking in a few
+places (for global resources). Although this is a simple extension, we simply
+haven't had time (or multiprocessor machines, thus a reason) to implement this.
+Despite that, we have kept the LLVM passes SMP ready, and you should too.
+
Added: www-releases/trunk/3.6.1/docs/_sources/YamlIO.txt
URL: http://llvm.org/viewvc/llvm-project/www-releases/trunk/3.6.1/docs/_sources/YamlIO.txt?rev=238135&view=auto
==============================================================================
--- www-releases/trunk/3.6.1/docs/_sources/YamlIO.txt (added)
+++ www-releases/trunk/3.6.1/docs/_sources/YamlIO.txt Mon May 25 08:53:02 2015
@@ -0,0 +1,951 @@
+=====================
+YAML I/O
+=====================
+
+.. contents::
+ :local:
+
+Introduction to YAML
+====================
+
+YAML is a human readable data serialization language. The full YAML language
+spec can be read at `yaml.org
+<http://www.yaml.org/spec/1.2/spec.html#Introduction>`_. The simplest form of
+yaml is just "scalars", "mappings", and "sequences". A scalar is any number
+or string. The pound/hash symbol (#) begins a comment line. A mapping is
+a set of key-value pairs where the key ends with a colon. For example:
+
+.. code-block:: yaml
+
+ # a mapping
+ name: Tom
+ hat-size: 7
+
+A sequence is a list of items where each item starts with a leading dash ('-').
+For example:
+
+.. code-block:: yaml
+
+ # a sequence
+ - x86
+ - x86_64
+ - PowerPC
+
+You can combine mappings and sequences by indenting. For example a sequence
+of mappings in which one of the mapping values is itself a sequence:
+
+.. code-block:: yaml
+
+ # a sequence of mappings with one key's value being a sequence
+ - name: Tom
+ cpus:
+ - x86
+ - x86_64
+ - name: Bob
+ cpus:
+ - x86
+ - name: Dan
+ cpus:
+ - PowerPC
+ - x86
+
+Sometime sequences are known to be short and the one entry per line is too
+verbose, so YAML offers an alternate syntax for sequences called a "Flow
+Sequence" in which you put comma separated sequence elements into square
+brackets. The above example could then be simplified to :
+
+
+.. code-block:: yaml
+
+ # a sequence of mappings with one key's value being a flow sequence
+ - name: Tom
+ cpus: [ x86, x86_64 ]
+ - name: Bob
+ cpus: [ x86 ]
+ - name: Dan
+ cpus: [ PowerPC, x86 ]
+
+
+Introduction to YAML I/O
+========================
+
+The use of indenting makes the YAML easy for a human to read and understand,
+but having a program read and write YAML involves a lot of tedious details.
+The YAML I/O library structures and simplifies reading and writing YAML
+documents.
+
+YAML I/O assumes you have some "native" data structures which you want to be
+able to dump as YAML and recreate from YAML. The first step is to try
+writing example YAML for your data structures. You may find after looking at
+possible YAML representations that a direct mapping of your data structures
+to YAML is not very readable. Often the fields are not in the order that
+a human would find readable. Or the same information is replicated in multiple
+locations, making it hard for a human to write such YAML correctly.
+
+In relational database theory there is a design step called normalization in
+which you reorganize fields and tables. The same considerations need to
+go into the design of your YAML encoding. But, you may not want to change
+your existing native data structures. Therefore, when writing out YAML
+there may be a normalization step, and when reading YAML there would be a
+corresponding denormalization step.
+
+YAML I/O uses a non-invasive, traits based design. YAML I/O defines some
+abstract base templates. You specialize those templates on your data types.
+For instance, if you have an enumerated type FooBar you could specialize
+ScalarEnumerationTraits on that type and define the enumeration() method:
+
+.. code-block:: c++
+
+ using llvm::yaml::ScalarEnumerationTraits;
+ using llvm::yaml::IO;
+
+ template <>
+ struct ScalarEnumerationTraits<FooBar> {
+ static void enumeration(IO &io, FooBar &value) {
+ ...
+ }
+ };
+
+
+As with all YAML I/O template specializations, the ScalarEnumerationTraits is used for
+both reading and writing YAML. That is, the mapping between in-memory enum
+values and the YAML string representation is only in one place.
+This assures that the code for writing and parsing of YAML stays in sync.
+
+To specify a YAML mappings, you define a specialization on
+llvm::yaml::MappingTraits.
+If your native data structure happens to be a struct that is already normalized,
+then the specialization is simple. For example:
+
+.. code-block:: c++
+
+ using llvm::yaml::MappingTraits;
+ using llvm::yaml::IO;
+
+ template <>
+ struct MappingTraits<Person> {
+ static void mapping(IO &io, Person &info) {
+ io.mapRequired("name", info.name);
+ io.mapOptional("hat-size", info.hatSize);
+ }
+ };
+
+
+A YAML sequence is automatically inferred if you data type has begin()/end()
+iterators and a push_back() method. Therefore any of the STL containers
+(such as std::vector<>) will automatically translate to YAML sequences.
+
+Once you have defined specializations for your data types, you can
+programmatically use YAML I/O to write a YAML document:
+
+.. code-block:: c++
+
+ using llvm::yaml::Output;
+
+ Person tom;
+ tom.name = "Tom";
+ tom.hatSize = 8;
+ Person dan;
+ dan.name = "Dan";
+ dan.hatSize = 7;
+ std::vector<Person> persons;
+ persons.push_back(tom);
+ persons.push_back(dan);
+
+ Output yout(llvm::outs());
+ yout << persons;
+
+This would write the following:
+
+.. code-block:: yaml
+
+ - name: Tom
+ hat-size: 8
+ - name: Dan
+ hat-size: 7
+
+And you can also read such YAML documents with the following code:
+
+.. code-block:: c++
+
+ using llvm::yaml::Input;
+
+ typedef std::vector<Person> PersonList;
+ std::vector<PersonList> docs;
+
+ Input yin(document.getBuffer());
+ yin >> docs;
+
+ if ( yin.error() )
+ return;
+
+ // Process read document
+ for ( PersonList &pl : docs ) {
+ for ( Person &person : pl ) {
+ cout << "name=" << person.name;
+ }
+ }
+
+One other feature of YAML is the ability to define multiple documents in a
+single file. That is why reading YAML produces a vector of your document type.
+
+
+
+Error Handling
+==============
+
+When parsing a YAML document, if the input does not match your schema (as
+expressed in your XxxTraits<> specializations). YAML I/O
+will print out an error message and your Input object's error() method will
+return true. For instance the following document:
+
+.. code-block:: yaml
+
+ - name: Tom
+ shoe-size: 12
+ - name: Dan
+ hat-size: 7
+
+Has a key (shoe-size) that is not defined in the schema. YAML I/O will
+automatically generate this error:
+
+.. code-block:: yaml
+
+ YAML:2:2: error: unknown key 'shoe-size'
+ shoe-size: 12
+ ^~~~~~~~~
+
+Similar errors are produced for other input not conforming to the schema.
+
+
+Scalars
+=======
+
+YAML scalars are just strings (i.e. not a sequence or mapping). The YAML I/O
+library provides support for translating between YAML scalars and specific
+C++ types.
+
+
+Built-in types
+--------------
+The following types have built-in support in YAML I/O:
+
+* bool
+* float
+* double
+* StringRef
+* std::string
+* int64_t
+* int32_t
+* int16_t
+* int8_t
+* uint64_t
+* uint32_t
+* uint16_t
+* uint8_t
+
+That is, you can use those types in fields of MappingTraits or as element type
+in sequence. When reading, YAML I/O will validate that the string found
+is convertible to that type and error out if not.
+
+
+Unique types
+------------
+Given that YAML I/O is trait based, the selection of how to convert your data
+to YAML is based on the type of your data. But in C++ type matching, typedefs
+do not generate unique type names. That means if you have two typedefs of
+unsigned int, to YAML I/O both types look exactly like unsigned int. To
+facilitate make unique type names, YAML I/O provides a macro which is used
+like a typedef on built-in types, but expands to create a class with conversion
+operators to and from the base type. For example:
+
+.. code-block:: c++
+
+ LLVM_YAML_STRONG_TYPEDEF(uint32_t, MyFooFlags)
+ LLVM_YAML_STRONG_TYPEDEF(uint32_t, MyBarFlags)
+
+This generates two classes MyFooFlags and MyBarFlags which you can use in your
+native data structures instead of uint32_t. They are implicitly
+converted to and from uint32_t. The point of creating these unique types
+is that you can now specify traits on them to get different YAML conversions.
+
+Hex types
+---------
+An example use of a unique type is that YAML I/O provides fixed sized unsigned
+integers that are written with YAML I/O as hexadecimal instead of the decimal
+format used by the built-in integer types:
+
+* Hex64
+* Hex32
+* Hex16
+* Hex8
+
+You can use llvm::yaml::Hex32 instead of uint32_t and the only different will
+be that when YAML I/O writes out that type it will be formatted in hexadecimal.
+
+
+ScalarEnumerationTraits
+-----------------------
+YAML I/O supports translating between in-memory enumerations and a set of string
+values in YAML documents. This is done by specializing ScalarEnumerationTraits<>
+on your enumeration type and define a enumeration() method.
+For instance, suppose you had an enumeration of CPUs and a struct with it as
+a field:
+
+.. code-block:: c++
+
+ enum CPUs {
+ cpu_x86_64 = 5,
+ cpu_x86 = 7,
+ cpu_PowerPC = 8
+ };
+
+ struct Info {
+ CPUs cpu;
+ uint32_t flags;
+ };
+
+To support reading and writing of this enumeration, you can define a
+ScalarEnumerationTraits specialization on CPUs, which can then be used
+as a field type:
+
+.. code-block:: c++
+
+ using llvm::yaml::ScalarEnumerationTraits;
+ using llvm::yaml::MappingTraits;
+ using llvm::yaml::IO;
+
+ template <>
+ struct ScalarEnumerationTraits<CPUs> {
+ static void enumeration(IO &io, CPUs &value) {
+ io.enumCase(value, "x86_64", cpu_x86_64);
+ io.enumCase(value, "x86", cpu_x86);
+ io.enumCase(value, "PowerPC", cpu_PowerPC);
+ }
+ };
+
+ template <>
+ struct MappingTraits<Info> {
+ static void mapping(IO &io, Info &info) {
+ io.mapRequired("cpu", info.cpu);
+ io.mapOptional("flags", info.flags, 0);
+ }
+ };
+
+When reading YAML, if the string found does not match any of the the strings
+specified by enumCase() methods, an error is automatically generated.
+When writing YAML, if the value being written does not match any of the values
+specified by the enumCase() methods, a runtime assertion is triggered.
+
+
+BitValue
+--------
+Another common data structure in C++ is a field where each bit has a unique
+meaning. This is often used in a "flags" field. YAML I/O has support for
+converting such fields to a flow sequence. For instance suppose you
+had the following bit flags defined:
+
+.. code-block:: c++
+
+ enum {
+ flagsPointy = 1
+ flagsHollow = 2
+ flagsFlat = 4
+ flagsRound = 8
+ };
+
+ LLVM_YAML_STRONG_TYPEDEF(uint32_t, MyFlags)
+
+To support reading and writing of MyFlags, you specialize ScalarBitSetTraits<>
+on MyFlags and provide the bit values and their names.
+
+.. code-block:: c++
+
+ using llvm::yaml::ScalarBitSetTraits;
+ using llvm::yaml::MappingTraits;
+ using llvm::yaml::IO;
+
+ template <>
+ struct ScalarBitSetTraits<MyFlags> {
+ static void bitset(IO &io, MyFlags &value) {
+ io.bitSetCase(value, "hollow", flagHollow);
+ io.bitSetCase(value, "flat", flagFlat);
+ io.bitSetCase(value, "round", flagRound);
+ io.bitSetCase(value, "pointy", flagPointy);
+ }
+ };
+
+ struct Info {
+ StringRef name;
+ MyFlags flags;
+ };
+
+ template <>
+ struct MappingTraits<Info> {
+ static void mapping(IO &io, Info& info) {
+ io.mapRequired("name", info.name);
+ io.mapRequired("flags", info.flags);
+ }
+ };
+
+With the above, YAML I/O (when writing) will test mask each value in the
+bitset trait against the flags field, and each that matches will
+cause the corresponding string to be added to the flow sequence. The opposite
+is done when reading and any unknown string values will result in a error. With
+the above schema, a same valid YAML document is:
+
+.. code-block:: yaml
+
+ name: Tom
+ flags: [ pointy, flat ]
+
+Sometimes a "flags" field might contains an enumeration part
+defined by a bit-mask.
+
+.. code-block:: c++
+
+ enum {
+ flagsFeatureA = 1,
+ flagsFeatureB = 2,
+ flagsFeatureC = 4,
+
+ flagsCPUMask = 24,
+
+ flagsCPU1 = 8,
+ flagsCPU2 = 16
+ };
+
+To support reading and writing such fields, you need to use the maskedBitSet()
+method and provide the bit values, their names and the enumeration mask.
+
+.. code-block:: c++
+
+ template <>
+ struct ScalarBitSetTraits<MyFlags> {
+ static void bitset(IO &io, MyFlags &value) {
+ io.bitSetCase(value, "featureA", flagsFeatureA);
+ io.bitSetCase(value, "featureB", flagsFeatureB);
+ io.bitSetCase(value, "featureC", flagsFeatureC);
+ io.maskedBitSetCase(value, "CPU1", flagsCPU1, flagsCPUMask);
+ io.maskedBitSetCase(value, "CPU2", flagsCPU2, flagsCPUMask);
+ }
+ };
+
+YAML I/O (when writing) will apply the enumeration mask to the flags field,
+and compare the result and values from the bitset. As in case of a regular
+bitset, each that matches will cause the corresponding string to be added
+to the flow sequence.
+
+Custom Scalar
+-------------
+Sometimes for readability a scalar needs to be formatted in a custom way. For
+instance your internal data structure may use a integer for time (seconds since
+some epoch), but in YAML it would be much nicer to express that integer in
+some time format (e.g. 4-May-2012 10:30pm). YAML I/O has a way to support
+custom formatting and parsing of scalar types by specializing ScalarTraits<> on
+your data type. When writing, YAML I/O will provide the native type and
+your specialization must create a temporary llvm::StringRef. When reading,
+YAML I/O will provide an llvm::StringRef of scalar and your specialization
+must convert that to your native data type. An outline of a custom scalar type
+looks like:
+
+.. code-block:: c++
+
+ using llvm::yaml::ScalarTraits;
+ using llvm::yaml::IO;
+
+ template <>
+ struct ScalarTraits<MyCustomType> {
+ static void output(const T &value, llvm::raw_ostream &out) {
+ out << value; // do custom formatting here
+ }
+ static StringRef input(StringRef scalar, T &value) {
+ // do custom parsing here. Return the empty string on success,
+ // or an error message on failure.
+ return StringRef();
+ }
+ // Determine if this scalar needs quotes.
+ static bool mustQuote(StringRef) { return true; }
+ };
+
+
+Mappings
+========
+
+To be translated to or from a YAML mapping for your type T you must specialize
+llvm::yaml::MappingTraits on T and implement the "void mapping(IO &io, T&)"
+method. If your native data structures use pointers to a class everywhere,
+you can specialize on the class pointer. Examples:
+
+.. code-block:: c++
+
+ using llvm::yaml::MappingTraits;
+ using llvm::yaml::IO;
+
+ // Example of struct Foo which is used by value
+ template <>
+ struct MappingTraits<Foo> {
+ static void mapping(IO &io, Foo &foo) {
+ io.mapOptional("size", foo.size);
+ ...
+ }
+ };
+
+ // Example of struct Bar which is natively always a pointer
+ template <>
+ struct MappingTraits<Bar*> {
+ static void mapping(IO &io, Bar *&bar) {
+ io.mapOptional("size", bar->size);
+ ...
+ }
+ };
+
+
+No Normalization
+----------------
+
+The mapping() method is responsible, if needed, for normalizing and
+denormalizing. In a simple case where the native data structure requires no
+normalization, the mapping method just uses mapOptional() or mapRequired() to
+bind the struct's fields to YAML key names. For example:
+
+.. code-block:: c++
+
+ using llvm::yaml::MappingTraits;
+ using llvm::yaml::IO;
+
+ template <>
+ struct MappingTraits<Person> {
+ static void mapping(IO &io, Person &info) {
+ io.mapRequired("name", info.name);
+ io.mapOptional("hat-size", info.hatSize);
+ }
+ };
+
+
+Normalization
+----------------
+
+When [de]normalization is required, the mapping() method needs a way to access
+normalized values as fields. To help with this, there is
+a template MappingNormalization<> which you can then use to automatically
+do the normalization and denormalization. The template is used to create
+a local variable in your mapping() method which contains the normalized keys.
+
+Suppose you have native data type
+Polar which specifies a position in polar coordinates (distance, angle):
+
+.. code-block:: c++
+
+ struct Polar {
+ float distance;
+ float angle;
+ };
+
+but you've decided the normalized YAML for should be in x,y coordinates. That
+is, you want the yaml to look like:
+
+.. code-block:: yaml
+
+ x: 10.3
+ y: -4.7
+
+You can support this by defining a MappingTraits that normalizes the polar
+coordinates to x,y coordinates when writing YAML and denormalizes x,y
+coordinates into polar when reading YAML.
+
+.. code-block:: c++
+
+ using llvm::yaml::MappingTraits;
+ using llvm::yaml::IO;
+
+ template <>
+ struct MappingTraits<Polar> {
+
+ class NormalizedPolar {
+ public:
+ NormalizedPolar(IO &io)
+ : x(0.0), y(0.0) {
+ }
+ NormalizedPolar(IO &, Polar &polar)
+ : x(polar.distance * cos(polar.angle)),
+ y(polar.distance * sin(polar.angle)) {
+ }
+ Polar denormalize(IO &) {
+ return Polar(sqrt(x*x+y*y), arctan(x,y));
+ }
+
+ float x;
+ float y;
+ };
+
+ static void mapping(IO &io, Polar &polar) {
+ MappingNormalization<NormalizedPolar, Polar> keys(io, polar);
+
+ io.mapRequired("x", keys->x);
+ io.mapRequired("y", keys->y);
+ }
+ };
+
+When writing YAML, the local variable "keys" will be a stack allocated
+instance of NormalizedPolar, constructed from the supplied polar object which
+initializes it x and y fields. The mapRequired() methods then write out the x
+and y values as key/value pairs.
+
+When reading YAML, the local variable "keys" will be a stack allocated instance
+of NormalizedPolar, constructed by the empty constructor. The mapRequired
+methods will find the matching key in the YAML document and fill in the x and y
+fields of the NormalizedPolar object keys. At the end of the mapping() method
+when the local keys variable goes out of scope, the denormalize() method will
+automatically be called to convert the read values back to polar coordinates,
+and then assigned back to the second parameter to mapping().
+
+In some cases, the normalized class may be a subclass of the native type and
+could be returned by the denormalize() method, except that the temporary
+normalized instance is stack allocated. In these cases, the utility template
+MappingNormalizationHeap<> can be used instead. It just like
+MappingNormalization<> except that it heap allocates the normalized object
+when reading YAML. It never destroys the normalized object. The denormalize()
+method can this return "this".
+
+
+Default values
+--------------
+Within a mapping() method, calls to io.mapRequired() mean that that key is
+required to exist when parsing YAML documents, otherwise YAML I/O will issue an
+error.
+
+On the other hand, keys registered with io.mapOptional() are allowed to not
+exist in the YAML document being read. So what value is put in the field
+for those optional keys?
+There are two steps to how those optional fields are filled in. First, the
+second parameter to the mapping() method is a reference to a native class. That
+native class must have a default constructor. Whatever value the default
+constructor initially sets for an optional field will be that field's value.
+Second, the mapOptional() method has an optional third parameter. If provided
+it is the value that mapOptional() should set that field to if the YAML document
+does not have that key.
+
+There is one important difference between those two ways (default constructor
+and third parameter to mapOptional). When YAML I/O generates a YAML document,
+if the mapOptional() third parameter is used, if the actual value being written
+is the same as (using ==) the default value, then that key/value is not written.
+
+
+Order of Keys
+--------------
+
+When writing out a YAML document, the keys are written in the order that the
+calls to mapRequired()/mapOptional() are made in the mapping() method. This
+gives you a chance to write the fields in an order that a human reader of
+the YAML document would find natural. This may be different that the order
+of the fields in the native class.
+
+When reading in a YAML document, the keys in the document can be in any order,
+but they are processed in the order that the calls to mapRequired()/mapOptional()
+are made in the mapping() method. That enables some interesting
+functionality. For instance, if the first field bound is the cpu and the second
+field bound is flags, and the flags are cpu specific, you can programmatically
+switch how the flags are converted to and from YAML based on the cpu.
+This works for both reading and writing. For example:
+
+.. code-block:: c++
+
+ using llvm::yaml::MappingTraits;
+ using llvm::yaml::IO;
+
+ struct Info {
+ CPUs cpu;
+ uint32_t flags;
+ };
+
+ template <>
+ struct MappingTraits<Info> {
+ static void mapping(IO &io, Info &info) {
+ io.mapRequired("cpu", info.cpu);
+ // flags must come after cpu for this to work when reading yaml
+ if ( info.cpu == cpu_x86_64 )
+ io.mapRequired("flags", *(My86_64Flags*)info.flags);
+ else
+ io.mapRequired("flags", *(My86Flags*)info.flags);
+ }
+ };
+
+
+Tags
+----
+
+The YAML syntax supports tags as a way to specify the type of a node before
+it is parsed. This allows dynamic types of nodes. But the YAML I/O model uses
+static typing, so there are limits to how you can use tags with the YAML I/O
+model. Recently, we added support to YAML I/O for checking/setting the optional
+tag on a map. Using this functionality it is even possbile to support different
+mappings, as long as they are convertable.
+
+To check a tag, inside your mapping() method you can use io.mapTag() to specify
+what the tag should be. This will also add that tag when writing yaml.
+
+Validation
+----------
+
+Sometimes in a yaml map, each key/value pair is valid, but the combination is
+not. This is similar to something having no syntax errors, but still having
+semantic errors. To support semantic level checking, YAML I/O allows
+an optional ``validate()`` method in a MappingTraits template specialization.
+
+When parsing yaml, the ``validate()`` method is call *after* all key/values in
+the map have been processed. Any error message returned by the ``validate()``
+method during input will be printed just a like a syntax error would be printed.
+When writing yaml, the ``validate()`` method is called *before* the yaml
+key/values are written. Any error during output will trigger an ``assert()``
+because it is a programming error to have invalid struct values.
+
+
+.. code-block:: c++
+
+ using llvm::yaml::MappingTraits;
+ using llvm::yaml::IO;
+
+ struct Stuff {
+ ...
+ };
+
+ template <>
+ struct MappingTraits<Stuff> {
+ static void mapping(IO &io, Stuff &stuff) {
+ ...
+ }
+ static StringRef validate(IO &io, Stuff &stuff) {
+ // Look at all fields in 'stuff' and if there
+ // are any bad values return a string describing
+ // the error. Otherwise return an empty string.
+ return StringRef();
+ }
+ };
+
+
+Sequence
+========
+
+To be translated to or from a YAML sequence for your type T you must specialize
+llvm::yaml::SequenceTraits on T and implement two methods:
+``size_t size(IO &io, T&)`` and
+``T::value_type& element(IO &io, T&, size_t indx)``. For example:
+
+.. code-block:: c++
+
+ template <>
+ struct SequenceTraits<MySeq> {
+ static size_t size(IO &io, MySeq &list) { ... }
+ static MySeqEl &element(IO &io, MySeq &list, size_t index) { ... }
+ };
+
+The size() method returns how many elements are currently in your sequence.
+The element() method returns a reference to the i'th element in the sequence.
+When parsing YAML, the element() method may be called with an index one bigger
+than the current size. Your element() method should allocate space for one
+more element (using default constructor if element is a C++ object) and returns
+a reference to that new allocated space.
+
+
+Flow Sequence
+-------------
+A YAML "flow sequence" is a sequence that when written to YAML it uses the
+inline notation (e.g [ foo, bar ] ). To specify that a sequence type should
+be written in YAML as a flow sequence, your SequenceTraits specialization should
+add "static const bool flow = true;". For instance:
+
+.. code-block:: c++
+
+ template <>
+ struct SequenceTraits<MyList> {
+ static size_t size(IO &io, MyList &list) { ... }
+ static MyListEl &element(IO &io, MyList &list, size_t index) { ... }
+
+ // The existence of this member causes YAML I/O to use a flow sequence
+ static const bool flow = true;
+ };
+
+With the above, if you used MyList as the data type in your native data
+structures, then then when converted to YAML, a flow sequence of integers
+will be used (e.g. [ 10, -3, 4 ]).
+
+
+Utility Macros
+--------------
+Since a common source of sequences is std::vector<>, YAML I/O provides macros:
+LLVM_YAML_IS_SEQUENCE_VECTOR() and LLVM_YAML_IS_FLOW_SEQUENCE_VECTOR() which
+can be used to easily specify SequenceTraits<> on a std::vector type. YAML
+I/O does not partial specialize SequenceTraits on std::vector<> because that
+would force all vectors to be sequences. An example use of the macros:
+
+.. code-block:: c++
+
+ std::vector<MyType1>;
+ std::vector<MyType2>;
+ LLVM_YAML_IS_SEQUENCE_VECTOR(MyType1)
+ LLVM_YAML_IS_FLOW_SEQUENCE_VECTOR(MyType2)
+
+
+
+Document List
+=============
+
+YAML allows you to define multiple "documents" in a single YAML file. Each
+new document starts with a left aligned "---" token. The end of all documents
+is denoted with a left aligned "..." token. Many users of YAML will never
+have need for multiple documents. The top level node in their YAML schema
+will be a mapping or sequence. For those cases, the following is not needed.
+But for cases where you do want multiple documents, you can specify a
+trait for you document list type. The trait has the same methods as
+SequenceTraits but is named DocumentListTraits. For example:
+
+.. code-block:: c++
+
+ template <>
+ struct DocumentListTraits<MyDocList> {
+ static size_t size(IO &io, MyDocList &list) { ... }
+ static MyDocType element(IO &io, MyDocList &list, size_t index) { ... }
+ };
+
+
+User Context Data
+=================
+When an llvm::yaml::Input or llvm::yaml::Output object is created their
+constructors take an optional "context" parameter. This is a pointer to
+whatever state information you might need.
+
+For instance, in a previous example we showed how the conversion type for a
+flags field could be determined at runtime based on the value of another field
+in the mapping. But what if an inner mapping needs to know some field value
+of an outer mapping? That is where the "context" parameter comes in. You
+can set values in the context in the outer map's mapping() method and
+retrieve those values in the inner map's mapping() method.
+
+The context value is just a void*. All your traits which use the context
+and operate on your native data types, need to agree what the context value
+actually is. It could be a pointer to an object or struct which your various
+traits use to shared context sensitive information.
+
+
+Output
+======
+
+The llvm::yaml::Output class is used to generate a YAML document from your
+in-memory data structures, using traits defined on your data types.
+To instantiate an Output object you need an llvm::raw_ostream, and optionally
+a context pointer:
+
+.. code-block:: c++
+
+ class Output : public IO {
+ public:
+ Output(llvm::raw_ostream &, void *context=NULL);
+
+Once you have an Output object, you can use the C++ stream operator on it
+to write your native data as YAML. One thing to recall is that a YAML file
+can contain multiple "documents". If the top level data structure you are
+streaming as YAML is a mapping, scalar, or sequence, then Output assumes you
+are generating one document and wraps the mapping output
+with "``---``" and trailing "``...``".
+
+.. code-block:: c++
+
+ using llvm::yaml::Output;
+
+ void dumpMyMapDoc(const MyMapType &info) {
+ Output yout(llvm::outs());
+ yout << info;
+ }
+
+The above could produce output like:
+
+.. code-block:: yaml
+
+ ---
+ name: Tom
+ hat-size: 7
+ ...
+
+On the other hand, if the top level data structure you are streaming as YAML
+has a DocumentListTraits specialization, then Output walks through each element
+of your DocumentList and generates a "---" before the start of each element
+and ends with a "...".
+
+.. code-block:: c++
+
+ using llvm::yaml::Output;
+
+ void dumpMyMapDoc(const MyDocListType &docList) {
+ Output yout(llvm::outs());
+ yout << docList;
+ }
+
+The above could produce output like:
+
+.. code-block:: yaml
+
+ ---
+ name: Tom
+ hat-size: 7
+ ---
+ name: Tom
+ shoe-size: 11
+ ...
+
+Input
+=====
+
+The llvm::yaml::Input class is used to parse YAML document(s) into your native
+data structures. To instantiate an Input
+object you need a StringRef to the entire YAML file, and optionally a context
+pointer:
+
+.. code-block:: c++
+
+ class Input : public IO {
+ public:
+ Input(StringRef inputContent, void *context=NULL);
+
+Once you have an Input object, you can use the C++ stream operator to read
+the document(s). If you expect there might be multiple YAML documents in
+one file, you'll need to specialize DocumentListTraits on a list of your
+document type and stream in that document list type. Otherwise you can
+just stream in the document type. Also, you can check if there was
+any syntax errors in the YAML be calling the error() method on the Input
+object. For example:
+
+.. code-block:: c++
+
+ // Reading a single document
+ using llvm::yaml::Input;
+
+ Input yin(mb.getBuffer());
+
+ // Parse the YAML file
+ MyDocType theDoc;
+ yin >> theDoc;
+
+ // Check for error
+ if ( yin.error() )
+ return;
+
+
+.. code-block:: c++
+
+ // Reading multiple documents in one file
+ using llvm::yaml::Input;
+
+ LLVM_YAML_IS_DOCUMENT_LIST_VECTOR(std::vector<MyDocType>)
+
+ Input yin(mb.getBuffer());
+
+ // Parse the YAML file
+ std::vector<MyDocType> theDocList;
+ yin >> theDocList;
+
+ // Check for error
+ if ( yin.error() )
+ return;
+
+
Added: www-releases/trunk/3.6.1/docs/_sources/index.txt
URL: http://llvm.org/viewvc/llvm-project/www-releases/trunk/3.6.1/docs/_sources/index.txt?rev=238135&view=auto
==============================================================================
--- www-releases/trunk/3.6.1/docs/_sources/index.txt (added)
+++ www-releases/trunk/3.6.1/docs/_sources/index.txt Mon May 25 08:53:02 2015
@@ -0,0 +1,460 @@
+Overview
+========
+
+The LLVM compiler infrastructure supports a wide range of projects, from
+industrial strength compilers to specialized JIT applications to small
+research projects.
+
+Similarly, documentation is broken down into several high-level groupings
+targeted at different audiences:
+
+LLVM Design & Overview
+======================
+
+Several introductory papers and presentations.
+
+.. toctree::
+ :hidden:
+
+ LangRef
+
+:doc:`LangRef`
+ Defines the LLVM intermediate representation.
+
+`Introduction to the LLVM Compiler`__
+ Presentation providing a users introduction to LLVM.
+
+ .. __: http://llvm.org/pubs/2008-10-04-ACAT-LLVM-Intro.html
+
+`Intro to LLVM`__
+ Book chapter providing a compiler hacker's introduction to LLVM.
+
+ .. __: http://www.aosabook.org/en/llvm.html
+
+
+`LLVM: A Compilation Framework for Lifelong Program Analysis & Transformation`__
+ Design overview.
+
+ .. __: http://llvm.org/pubs/2004-01-30-CGO-LLVM.html
+
+`LLVM: An Infrastructure for Multi-Stage Optimization`__
+ More details (quite old now).
+
+ .. __: http://llvm.org/pubs/2002-12-LattnerMSThesis.html
+
+`Publications mentioning LLVM <http://llvm.org/pubs>`_
+ ..
+
+User Guides
+===========
+
+For those new to the LLVM system.
+
+NOTE: If you are a user who is only interested in using LLVM-based
+compilers, you should look into `Clang <http://clang.llvm.org>`_ or
+`DragonEgg <http://dragonegg.llvm.org>`_ instead. The documentation here is
+intended for users who have a need to work with the intermediate LLVM
+representation.
+
+.. toctree::
+ :hidden:
+
+ CMake
+ HowToBuildOnARM
+ HowToCrossCompileLLVM
+ CommandGuide/index
+ GettingStarted
+ GettingStartedVS
+ FAQ
+ Lexicon
+ HowToAddABuilder
+ yaml2obj
+ HowToSubmitABug
+ SphinxQuickstartTemplate
+ Phabricator
+ TestingGuide
+ tutorial/index
+ ReleaseNotes
+ Passes
+ YamlIO
+ GetElementPtr
+ MCJITDesignAndImplementation
+
+:doc:`GettingStarted`
+ Discusses how to get up and running quickly with the LLVM infrastructure.
+ Everything from unpacking and compilation of the distribution to execution
+ of some tools.
+
+:doc:`CMake`
+ An addendum to the main Getting Started guide for those using the `CMake
+ build system <http://www.cmake.org>`_.
+
+:doc:`HowToBuildOnARM`
+ Notes on building and testing LLVM/Clang on ARM.
+
+:doc:`HowToCrossCompileLLVM`
+ Notes on cross-building and testing LLVM/Clang.
+
+:doc:`GettingStartedVS`
+ An addendum to the main Getting Started guide for those using Visual Studio
+ on Windows.
+
+:doc:`tutorial/index`
+ Tutorials about using LLVM. Includes a tutorial about making a custom
+ language with LLVM.
+
+:doc:`LLVM Command Guide <CommandGuide/index>`
+ A reference manual for the LLVM command line utilities ("man" pages for LLVM
+ tools).
+
+:doc:`Passes`
+ A list of optimizations and analyses implemented in LLVM.
+
+:doc:`FAQ`
+ A list of common questions and problems and their solutions.
+
+:doc:`Release notes for the current release <ReleaseNotes>`
+ This describes new features, known bugs, and other limitations.
+
+:doc:`HowToSubmitABug`
+ Instructions for properly submitting information about any bugs you run into
+ in the LLVM system.
+
+:doc:`SphinxQuickstartTemplate`
+ A template + tutorial for writing new Sphinx documentation. It is meant
+ to be read in source form.
+
+:doc:`LLVM Testing Infrastructure Guide <TestingGuide>`
+ A reference manual for using the LLVM testing infrastructure.
+
+`How to build the C, C++, ObjC, and ObjC++ front end`__
+ Instructions for building the clang front-end from source.
+
+ .. __: http://clang.llvm.org/get_started.html
+
+:doc:`Lexicon`
+ Definition of acronyms, terms and concepts used in LLVM.
+
+:doc:`HowToAddABuilder`
+ Instructions for adding new builder to LLVM buildbot master.
+
+:doc:`YamlIO`
+ A reference guide for using LLVM's YAML I/O library.
+
+:doc:`GetElementPtr`
+ Answers to some very frequent questions about LLVM's most frequently
+ misunderstood instruction.
+
+Programming Documentation
+=========================
+
+For developers of applications which use LLVM as a library.
+
+.. toctree::
+ :hidden:
+
+ Atomics
+ CodingStandards
+ CommandLine
+ CompilerWriterInfo
+ ExtendingLLVM
+ HowToSetUpLLVMStyleRTTI
+ ProgrammersManual
+ Extensions
+
+:doc:`LLVM Language Reference Manual <LangRef>`
+ Defines the LLVM intermediate representation and the assembly form of the
+ different nodes.
+
+:doc:`Atomics`
+ Information about LLVM's concurrency model.
+
+:doc:`ProgrammersManual`
+ Introduction to the general layout of the LLVM sourcebase, important classes
+ and APIs, and some tips & tricks.
+
+:doc:`Extensions`
+ LLVM-specific extensions to tools and formats LLVM seeks compatibility with.
+
+:doc:`CommandLine`
+ Provides information on using the command line parsing library.
+
+:doc:`CodingStandards`
+ Details the LLVM coding standards and provides useful information on writing
+ efficient C++ code.
+
+:doc:`HowToSetUpLLVMStyleRTTI`
+ How to make ``isa<>``, ``dyn_cast<>``, etc. available for clients of your
+ class hierarchy.
+
+:doc:`ExtendingLLVM`
+ Look here to see how to add instructions and intrinsics to LLVM.
+
+`Doxygen generated documentation <http://llvm.org/doxygen/>`_
+ (`classes <http://llvm.org/doxygen/inherits.html>`_)
+ (`tarball <http://llvm.org/doxygen/doxygen.tar.gz>`_)
+
+`Documentation for Go bindings <http://godoc.org/llvm.org/llvm/bindings/go/llvm>`_
+
+`ViewVC Repository Browser <http://llvm.org/viewvc/>`_
+ ..
+
+:doc:`CompilerWriterInfo`
+ A list of helpful links for compiler writers.
+
+Subsystem Documentation
+=======================
+
+For API clients and LLVM developers.
+
+.. toctree::
+ :hidden:
+
+ AliasAnalysis
+ BitCodeFormat
+ BlockFrequencyTerminology
+ BranchWeightMetadata
+ Bugpoint
+ CodeGenerator
+ ExceptionHandling
+ LinkTimeOptimization
+ SegmentedStacks
+ TableGenFundamentals
+ TableGen/index
+ DebuggingJITedCode
+ GoldPlugin
+ MarkedUpDisassembly
+ SystemLibrary
+ SourceLevelDebugging
+ Vectorizers
+ WritingAnLLVMBackend
+ GarbageCollection
+ WritingAnLLVMPass
+ HowToUseAttributes
+ NVPTXUsage
+ R600Usage
+ StackMaps
+ InAlloca
+ BigEndianNEON
+ CoverageMappingFormat
+ Statepoints
+ MergeFunctions
+
+:doc:`WritingAnLLVMPass`
+ Information on how to write LLVM transformations and analyses.
+
+:doc:`WritingAnLLVMBackend`
+ Information on how to write LLVM backends for machine targets.
+
+:doc:`CodeGenerator`
+ The design and implementation of the LLVM code generator. Useful if you are
+ working on retargetting LLVM to a new architecture, designing a new codegen
+ pass, or enhancing existing components.
+
+:doc:`TableGen <TableGen/index>`
+ Describes the TableGen tool, which is used heavily by the LLVM code
+ generator.
+
+:doc:`AliasAnalysis`
+ Information on how to write a new alias analysis implementation or how to
+ use existing analyses.
+
+:doc:`GarbageCollection`
+ The interfaces source-language compilers should use for compiling GC'd
+ programs.
+
+:doc:`Source Level Debugging with LLVM <SourceLevelDebugging>`
+ This document describes the design and philosophy behind the LLVM
+ source-level debugger.
+
+:doc:`Vectorizers`
+ This document describes the current status of vectorization in LLVM.
+
+:doc:`ExceptionHandling`
+ This document describes the design and implementation of exception handling
+ in LLVM.
+
+:doc:`Bugpoint`
+ Automatic bug finder and test-case reducer description and usage
+ information.
+
+:doc:`BitCodeFormat`
+ This describes the file format and encoding used for LLVM "bc" files.
+
+:doc:`System Library <SystemLibrary>`
+ This document describes the LLVM System Library (``lib/System``) and
+ how to keep LLVM source code portable
+
+:doc:`LinkTimeOptimization`
+ This document describes the interface between LLVM intermodular optimizer
+ and the linker and its design
+
+:doc:`GoldPlugin`
+ How to build your programs with link-time optimization on Linux.
+
+:doc:`DebuggingJITedCode`
+ How to debug JITed code with GDB.
+
+:doc:`MCJITDesignAndImplementation`
+ Describes the inner workings of MCJIT execution engine.
+
+:doc:`BranchWeightMetadata`
+ Provides information about Branch Prediction Information.
+
+:doc:`BlockFrequencyTerminology`
+ Provides information about terminology used in the ``BlockFrequencyInfo``
+ analysis pass.
+
+:doc:`SegmentedStacks`
+ This document describes segmented stacks and how they are used in LLVM.
+
+:doc:`MarkedUpDisassembly`
+ This document describes the optional rich disassembly output syntax.
+
+:doc:`HowToUseAttributes`
+ Answers some questions about the new Attributes infrastructure.
+
+:doc:`NVPTXUsage`
+ This document describes using the NVPTX back-end to compile GPU kernels.
+
+:doc:`R600Usage`
+ This document describes how to use the R600 back-end.
+
+:doc:`StackMaps`
+ LLVM support for mapping instruction addresses to the location of
+ values and allowing code to be patched.
+
+:doc:`BigEndianNEON`
+ LLVM's support for generating NEON instructions on big endian ARM targets is
+ somewhat nonintuitive. This document explains the implementation and rationale.
+
+:doc:`CoverageMappingFormat`
+ This describes the format and encoding used for LLVMâs code coverage mapping.
+
+:doc:`Statepoints`
+ This describes a set of experimental extensions for garbage
+ collection support.
+
+:doc:`MergeFunctions`
+ Describes functions merging optimization.
+
+Development Process Documentation
+=================================
+
+Information about LLVM's development process.
+
+.. toctree::
+ :hidden:
+
+ DeveloperPolicy
+ MakefileGuide
+ Projects
+ LLVMBuild
+ HowToReleaseLLVM
+ Packaging
+ ReleaseProcess
+ Phabricator
+
+:doc:`DeveloperPolicy`
+ The LLVM project's policy towards developers and their contributions.
+
+:doc:`Projects`
+ How-to guide and templates for new projects that *use* the LLVM
+ infrastructure. The templates (directory organization, Makefiles, and test
+ tree) allow the project code to be located outside (or inside) the ``llvm/``
+ tree, while using LLVM header files and libraries.
+
+:doc:`LLVMBuild`
+ Describes the LLVMBuild organization and files used by LLVM to specify
+ component descriptions.
+
+:doc:`MakefileGuide`
+ Describes how the LLVM makefiles work and how to use them.
+
+:doc:`HowToReleaseLLVM`
+ This is a guide to preparing LLVM releases. Most developers can ignore it.
+
+:doc:`ReleaseProcess`
+ This is a guide to validate a new release, during the release process. Most developers can ignore it.
+
+:doc:`Packaging`
+ Advice on packaging LLVM into a distribution.
+
+:doc:`Phabricator`
+ Describes how to use the Phabricator code review tool hosted on
+ http://reviews.llvm.org/ and its command line interface, Arcanist.
+
+Community
+=========
+
+LLVM has a thriving community of friendly and helpful developers.
+The two primary communication mechanisms in the LLVM community are mailing
+lists and IRC.
+
+Mailing Lists
+-------------
+
+If you can't find what you need in these docs, try consulting the mailing
+lists.
+
+`Developer's List (llvmdev)`__
+ This list is for people who want to be included in technical discussions of
+ LLVM. People post to this list when they have questions about writing code
+ for or using the LLVM tools. It is relatively low volume.
+
+ .. __: http://lists.cs.uiuc.edu/mailman/listinfo/llvmdev
+
+`Commits Archive (llvm-commits)`__
+ This list contains all commit messages that are made when LLVM developers
+ commit code changes to the repository. It also serves as a forum for
+ patch review (i.e. send patches here). It is useful for those who want to
+ stay on the bleeding edge of LLVM development. This list is very high
+ volume.
+
+ .. __: http://lists.cs.uiuc.edu/pipermail/llvm-commits/
+
+`Bugs & Patches Archive (llvmbugs)`__
+ This list gets emailed every time a bug is opened and closed. It is
+ higher volume than the LLVMdev list.
+
+ .. __: http://lists.cs.uiuc.edu/pipermail/llvmbugs/
+
+`Test Results Archive (llvm-testresults)`__
+ A message is automatically sent to this list by every active nightly tester
+ when it completes. As such, this list gets email several times each day,
+ making it a high volume list.
+
+ .. __: http://lists.cs.uiuc.edu/pipermail/llvm-testresults/
+
+`LLVM Announcements List (llvm-announce)`__
+ This is a low volume list that provides important announcements regarding
+ LLVM. It gets email about once a month.
+
+ .. __: http://lists.cs.uiuc.edu/mailman/listinfo/llvm-announce
+
+IRC
+---
+
+Users and developers of the LLVM project (including subprojects such as Clang)
+can be found in #llvm on `irc.oftc.net <irc://irc.oftc.net/llvm>`_.
+
+This channel has several bots.
+
+* Buildbot reporters
+
+ * llvmbb - Bot for the main LLVM buildbot master.
+ http://lab.llvm.org:8011/console
+ * bb-chapuni - An individually run buildbot master. http://bb.pgr.jp/console
+ * smooshlab - Apple's internal buildbot master.
+
+* robot - Bugzilla linker. %bug <number>
+
+* clang-bot - A `geordi <http://www.eelis.net/geordi/>`_ instance running
+ near-trunk clang instead of gcc.
+
+
+Indices and tables
+==================
+
+* :ref:`genindex`
+* :ref:`search`
Added: www-releases/trunk/3.6.1/docs/_sources/tutorial/LangImpl1.txt
URL: http://llvm.org/viewvc/llvm-project/www-releases/trunk/3.6.1/docs/_sources/tutorial/LangImpl1.txt?rev=238135&view=auto
==============================================================================
--- www-releases/trunk/3.6.1/docs/_sources/tutorial/LangImpl1.txt (added)
+++ www-releases/trunk/3.6.1/docs/_sources/tutorial/LangImpl1.txt Mon May 25 08:53:02 2015
@@ -0,0 +1,278 @@
+=================================================
+Kaleidoscope: Tutorial Introduction and the Lexer
+=================================================
+
+.. contents::
+ :local:
+
+Tutorial Introduction
+=====================
+
+Welcome to the "Implementing a language with LLVM" tutorial. This
+tutorial runs through the implementation of a simple language, showing
+how fun and easy it can be. This tutorial will get you up and started as
+well as help to build a framework you can extend to other languages. The
+code in this tutorial can also be used as a playground to hack on other
+LLVM specific things.
+
+The goal of this tutorial is to progressively unveil our language,
+describing how it is built up over time. This will let us cover a fairly
+broad range of language design and LLVM-specific usage issues, showing
+and explaining the code for it all along the way, without overwhelming
+you with tons of details up front.
+
+It is useful to point out ahead of time that this tutorial is really
+about teaching compiler techniques and LLVM specifically, *not* about
+teaching modern and sane software engineering principles. In practice,
+this means that we'll take a number of shortcuts to simplify the
+exposition. For example, the code leaks memory, uses global variables
+all over the place, doesn't use nice design patterns like
+`visitors <http://en.wikipedia.org/wiki/Visitor_pattern>`_, etc... but
+it is very simple. If you dig in and use the code as a basis for future
+projects, fixing these deficiencies shouldn't be hard.
+
+I've tried to put this tutorial together in a way that makes chapters
+easy to skip over if you are already familiar with or are uninterested
+in the various pieces. The structure of the tutorial is:
+
+- `Chapter #1 <#language>`_: Introduction to the Kaleidoscope
+ language, and the definition of its Lexer - This shows where we are
+ going and the basic functionality that we want it to do. In order to
+ make this tutorial maximally understandable and hackable, we choose
+ to implement everything in C++ instead of using lexer and parser
+ generators. LLVM obviously works just fine with such tools, feel free
+ to use one if you prefer.
+- `Chapter #2 <LangImpl2.html>`_: Implementing a Parser and AST -
+ With the lexer in place, we can talk about parsing techniques and
+ basic AST construction. This tutorial describes recursive descent
+ parsing and operator precedence parsing. Nothing in Chapters 1 or 2
+ is LLVM-specific, the code doesn't even link in LLVM at this point.
+ :)
+- `Chapter #3 <LangImpl3.html>`_: Code generation to LLVM IR - With
+ the AST ready, we can show off how easy generation of LLVM IR really
+ is.
+- `Chapter #4 <LangImpl4.html>`_: Adding JIT and Optimizer Support
+ - Because a lot of people are interested in using LLVM as a JIT,
+ we'll dive right into it and show you the 3 lines it takes to add JIT
+ support. LLVM is also useful in many other ways, but this is one
+ simple and "sexy" way to show off its power. :)
+- `Chapter #5 <LangImpl5.html>`_: Extending the Language: Control
+ Flow - With the language up and running, we show how to extend it
+ with control flow operations (if/then/else and a 'for' loop). This
+ gives us a chance to talk about simple SSA construction and control
+ flow.
+- `Chapter #6 <LangImpl6.html>`_: Extending the Language:
+ User-defined Operators - This is a silly but fun chapter that talks
+ about extending the language to let the user program define their own
+ arbitrary unary and binary operators (with assignable precedence!).
+ This lets us build a significant piece of the "language" as library
+ routines.
+- `Chapter #7 <LangImpl7.html>`_: Extending the Language: Mutable
+ Variables - This chapter talks about adding user-defined local
+ variables along with an assignment operator. The interesting part
+ about this is how easy and trivial it is to construct SSA form in
+ LLVM: no, LLVM does *not* require your front-end to construct SSA
+ form!
+- `Chapter #8 <LangImpl8.html>`_: Conclusion and other useful LLVM
+ tidbits - This chapter wraps up the series by talking about
+ potential ways to extend the language, but also includes a bunch of
+ pointers to info about "special topics" like adding garbage
+ collection support, exceptions, debugging, support for "spaghetti
+ stacks", and a bunch of other tips and tricks.
+
+By the end of the tutorial, we'll have written a bit less than 700 lines
+of non-comment, non-blank, lines of code. With this small amount of
+code, we'll have built up a very reasonable compiler for a non-trivial
+language including a hand-written lexer, parser, AST, as well as code
+generation support with a JIT compiler. While other systems may have
+interesting "hello world" tutorials, I think the breadth of this
+tutorial is a great testament to the strengths of LLVM and why you
+should consider it if you're interested in language or compiler design.
+
+A note about this tutorial: we expect you to extend the language and
+play with it on your own. Take the code and go crazy hacking away at it,
+compilers don't need to be scary creatures - it can be a lot of fun to
+play with languages!
+
+The Basic Language
+==================
+
+This tutorial will be illustrated with a toy language that we'll call
+"`Kaleidoscope <http://en.wikipedia.org/wiki/Kaleidoscope>`_" (derived
+from "meaning beautiful, form, and view"). Kaleidoscope is a procedural
+language that allows you to define functions, use conditionals, math,
+etc. Over the course of the tutorial, we'll extend Kaleidoscope to
+support the if/then/else construct, a for loop, user defined operators,
+JIT compilation with a simple command line interface, etc.
+
+Because we want to keep things simple, the only datatype in Kaleidoscope
+is a 64-bit floating point type (aka 'double' in C parlance). As such,
+all values are implicitly double precision and the language doesn't
+require type declarations. This gives the language a very nice and
+simple syntax. For example, the following simple example computes
+`Fibonacci numbers: <http://en.wikipedia.org/wiki/Fibonacci_number>`_
+
+::
+
+ # Compute the x'th fibonacci number.
+ def fib(x)
+ if x < 3 then
+ 1
+ else
+ fib(x-1)+fib(x-2)
+
+ # This expression will compute the 40th number.
+ fib(40)
+
+We also allow Kaleidoscope to call into standard library functions (the
+LLVM JIT makes this completely trivial). This means that you can use the
+'extern' keyword to define a function before you use it (this is also
+useful for mutually recursive functions). For example:
+
+::
+
+ extern sin(arg);
+ extern cos(arg);
+ extern atan2(arg1 arg2);
+
+ atan2(sin(.4), cos(42))
+
+A more interesting example is included in Chapter 6 where we write a
+little Kaleidoscope application that `displays a Mandelbrot
+Set <LangImpl6.html#example>`_ at various levels of magnification.
+
+Lets dive into the implementation of this language!
+
+The Lexer
+=========
+
+When it comes to implementing a language, the first thing needed is the
+ability to process a text file and recognize what it says. The
+traditional way to do this is to use a
+"`lexer <http://en.wikipedia.org/wiki/Lexical_analysis>`_" (aka
+'scanner') to break the input up into "tokens". Each token returned by
+the lexer includes a token code and potentially some metadata (e.g. the
+numeric value of a number). First, we define the possibilities:
+
+.. code-block:: c++
+
+ // The lexer returns tokens [0-255] if it is an unknown character, otherwise one
+ // of these for known things.
+ enum Token {
+ tok_eof = -1,
+
+ // commands
+ tok_def = -2, tok_extern = -3,
+
+ // primary
+ tok_identifier = -4, tok_number = -5,
+ };
+
+ static std::string IdentifierStr; // Filled in if tok_identifier
+ static double NumVal; // Filled in if tok_number
+
+Each token returned by our lexer will either be one of the Token enum
+values or it will be an 'unknown' character like '+', which is returned
+as its ASCII value. If the current token is an identifier, the
+``IdentifierStr`` global variable holds the name of the identifier. If
+the current token is a numeric literal (like 1.0), ``NumVal`` holds its
+value. Note that we use global variables for simplicity, this is not the
+best choice for a real language implementation :).
+
+The actual implementation of the lexer is a single function named
+``gettok``. The ``gettok`` function is called to return the next token
+from standard input. Its definition starts as:
+
+.. code-block:: c++
+
+ /// gettok - Return the next token from standard input.
+ static int gettok() {
+ static int LastChar = ' ';
+
+ // Skip any whitespace.
+ while (isspace(LastChar))
+ LastChar = getchar();
+
+``gettok`` works by calling the C ``getchar()`` function to read
+characters one at a time from standard input. It eats them as it
+recognizes them and stores the last character read, but not processed,
+in LastChar. The first thing that it has to do is ignore whitespace
+between tokens. This is accomplished with the loop above.
+
+The next thing ``gettok`` needs to do is recognize identifiers and
+specific keywords like "def". Kaleidoscope does this with this simple
+loop:
+
+.. code-block:: c++
+
+ if (isalpha(LastChar)) { // identifier: [a-zA-Z][a-zA-Z0-9]*
+ IdentifierStr = LastChar;
+ while (isalnum((LastChar = getchar())))
+ IdentifierStr += LastChar;
+
+ if (IdentifierStr == "def") return tok_def;
+ if (IdentifierStr == "extern") return tok_extern;
+ return tok_identifier;
+ }
+
+Note that this code sets the '``IdentifierStr``' global whenever it
+lexes an identifier. Also, since language keywords are matched by the
+same loop, we handle them here inline. Numeric values are similar:
+
+.. code-block:: c++
+
+ if (isdigit(LastChar) || LastChar == '.') { // Number: [0-9.]+
+ std::string NumStr;
+ do {
+ NumStr += LastChar;
+ LastChar = getchar();
+ } while (isdigit(LastChar) || LastChar == '.');
+
+ NumVal = strtod(NumStr.c_str(), 0);
+ return tok_number;
+ }
+
+This is all pretty straight-forward code for processing input. When
+reading a numeric value from input, we use the C ``strtod`` function to
+convert it to a numeric value that we store in ``NumVal``. Note that
+this isn't doing sufficient error checking: it will incorrectly read
+"1.23.45.67" and handle it as if you typed in "1.23". Feel free to
+extend it :). Next we handle comments:
+
+.. code-block:: c++
+
+ if (LastChar == '#') {
+ // Comment until end of line.
+ do LastChar = getchar();
+ while (LastChar != EOF && LastChar != '\n' && LastChar != '\r');
+
+ if (LastChar != EOF)
+ return gettok();
+ }
+
+We handle comments by skipping to the end of the line and then return
+the next token. Finally, if the input doesn't match one of the above
+cases, it is either an operator character like '+' or the end of the
+file. These are handled with this code:
+
+.. code-block:: c++
+
+ // Check for end of file. Don't eat the EOF.
+ if (LastChar == EOF)
+ return tok_eof;
+
+ // Otherwise, just return the character as its ascii value.
+ int ThisChar = LastChar;
+ LastChar = getchar();
+ return ThisChar;
+ }
+
+With this, we have the complete lexer for the basic Kaleidoscope
+language (the `full code listing <LangImpl2.html#code>`_ for the Lexer
+is available in the `next chapter <LangImpl2.html>`_ of the tutorial).
+Next we'll `build a simple parser that uses this to build an Abstract
+Syntax Tree <LangImpl2.html>`_. When we have that, we'll include a
+driver so that you can use the lexer and parser together.
+
+`Next: Implementing a Parser and AST <LangImpl2.html>`_
+
Added: www-releases/trunk/3.6.1/docs/_sources/tutorial/LangImpl2.txt
URL: http://llvm.org/viewvc/llvm-project/www-releases/trunk/3.6.1/docs/_sources/tutorial/LangImpl2.txt?rev=238135&view=auto
==============================================================================
--- www-releases/trunk/3.6.1/docs/_sources/tutorial/LangImpl2.txt (added)
+++ www-releases/trunk/3.6.1/docs/_sources/tutorial/LangImpl2.txt Mon May 25 08:53:02 2015
@@ -0,0 +1,698 @@
+===========================================
+Kaleidoscope: Implementing a Parser and AST
+===========================================
+
+.. contents::
+ :local:
+
+Chapter 2 Introduction
+======================
+
+Welcome to Chapter 2 of the "`Implementing a language with
+LLVM <index.html>`_" tutorial. This chapter shows you how to use the
+lexer, built in `Chapter 1 <LangImpl1.html>`_, to build a full
+`parser <http://en.wikipedia.org/wiki/Parsing>`_ for our Kaleidoscope
+language. Once we have a parser, we'll define and build an `Abstract
+Syntax Tree <http://en.wikipedia.org/wiki/Abstract_syntax_tree>`_ (AST).
+
+The parser we will build uses a combination of `Recursive Descent
+Parsing <http://en.wikipedia.org/wiki/Recursive_descent_parser>`_ and
+`Operator-Precedence
+Parsing <http://en.wikipedia.org/wiki/Operator-precedence_parser>`_ to
+parse the Kaleidoscope language (the latter for binary expressions and
+the former for everything else). Before we get to parsing though, lets
+talk about the output of the parser: the Abstract Syntax Tree.
+
+The Abstract Syntax Tree (AST)
+==============================
+
+The AST for a program captures its behavior in such a way that it is
+easy for later stages of the compiler (e.g. code generation) to
+interpret. We basically want one object for each construct in the
+language, and the AST should closely model the language. In
+Kaleidoscope, we have expressions, a prototype, and a function object.
+We'll start with expressions first:
+
+.. code-block:: c++
+
+ /// ExprAST - Base class for all expression nodes.
+ class ExprAST {
+ public:
+ virtual ~ExprAST() {}
+ };
+
+ /// NumberExprAST - Expression class for numeric literals like "1.0".
+ class NumberExprAST : public ExprAST {
+ double Val;
+ public:
+ NumberExprAST(double val) : Val(val) {}
+ };
+
+The code above shows the definition of the base ExprAST class and one
+subclass which we use for numeric literals. The important thing to note
+about this code is that the NumberExprAST class captures the numeric
+value of the literal as an instance variable. This allows later phases
+of the compiler to know what the stored numeric value is.
+
+Right now we only create the AST, so there are no useful accessor
+methods on them. It would be very easy to add a virtual method to pretty
+print the code, for example. Here are the other expression AST node
+definitions that we'll use in the basic form of the Kaleidoscope
+language:
+
+.. code-block:: c++
+
+ /// VariableExprAST - Expression class for referencing a variable, like "a".
+ class VariableExprAST : public ExprAST {
+ std::string Name;
+ public:
+ VariableExprAST(const std::string &name) : Name(name) {}
+ };
+
+ /// BinaryExprAST - Expression class for a binary operator.
+ class BinaryExprAST : public ExprAST {
+ char Op;
+ ExprAST *LHS, *RHS;
+ public:
+ BinaryExprAST(char op, ExprAST *lhs, ExprAST *rhs)
+ : Op(op), LHS(lhs), RHS(rhs) {}
+ };
+
+ /// CallExprAST - Expression class for function calls.
+ class CallExprAST : public ExprAST {
+ std::string Callee;
+ std::vector<ExprAST*> Args;
+ public:
+ CallExprAST(const std::string &callee, std::vector<ExprAST*> &args)
+ : Callee(callee), Args(args) {}
+ };
+
+This is all (intentionally) rather straight-forward: variables capture
+the variable name, binary operators capture their opcode (e.g. '+'), and
+calls capture a function name as well as a list of any argument
+expressions. One thing that is nice about our AST is that it captures
+the language features without talking about the syntax of the language.
+Note that there is no discussion about precedence of binary operators,
+lexical structure, etc.
+
+For our basic language, these are all of the expression nodes we'll
+define. Because it doesn't have conditional control flow, it isn't
+Turing-complete; we'll fix that in a later installment. The two things
+we need next are a way to talk about the interface to a function, and a
+way to talk about functions themselves:
+
+.. code-block:: c++
+
+ /// PrototypeAST - This class represents the "prototype" for a function,
+ /// which captures its name, and its argument names (thus implicitly the number
+ /// of arguments the function takes).
+ class PrototypeAST {
+ std::string Name;
+ std::vector<std::string> Args;
+ public:
+ PrototypeAST(const std::string &name, const std::vector<std::string> &args)
+ : Name(name), Args(args) {}
+ };
+
+ /// FunctionAST - This class represents a function definition itself.
+ class FunctionAST {
+ PrototypeAST *Proto;
+ ExprAST *Body;
+ public:
+ FunctionAST(PrototypeAST *proto, ExprAST *body)
+ : Proto(proto), Body(body) {}
+ };
+
+In Kaleidoscope, functions are typed with just a count of their
+arguments. Since all values are double precision floating point, the
+type of each argument doesn't need to be stored anywhere. In a more
+aggressive and realistic language, the "ExprAST" class would probably
+have a type field.
+
+With this scaffolding, we can now talk about parsing expressions and
+function bodies in Kaleidoscope.
+
+Parser Basics
+=============
+
+Now that we have an AST to build, we need to define the parser code to
+build it. The idea here is that we want to parse something like "x+y"
+(which is returned as three tokens by the lexer) into an AST that could
+be generated with calls like this:
+
+.. code-block:: c++
+
+ ExprAST *X = new VariableExprAST("x");
+ ExprAST *Y = new VariableExprAST("y");
+ ExprAST *Result = new BinaryExprAST('+', X, Y);
+
+In order to do this, we'll start by defining some basic helper routines:
+
+.. code-block:: c++
+
+ /// CurTok/getNextToken - Provide a simple token buffer. CurTok is the current
+ /// token the parser is looking at. getNextToken reads another token from the
+ /// lexer and updates CurTok with its results.
+ static int CurTok;
+ static int getNextToken() {
+ return CurTok = gettok();
+ }
+
+This implements a simple token buffer around the lexer. This allows us
+to look one token ahead at what the lexer is returning. Every function
+in our parser will assume that CurTok is the current token that needs to
+be parsed.
+
+.. code-block:: c++
+
+
+ /// Error* - These are little helper functions for error handling.
+ ExprAST *Error(const char *Str) { fprintf(stderr, "Error: %s\n", Str);return 0;}
+ PrototypeAST *ErrorP(const char *Str) { Error(Str); return 0; }
+ FunctionAST *ErrorF(const char *Str) { Error(Str); return 0; }
+
+The ``Error`` routines are simple helper routines that our parser will
+use to handle errors. The error recovery in our parser will not be the
+best and is not particular user-friendly, but it will be enough for our
+tutorial. These routines make it easier to handle errors in routines
+that have various return types: they always return null.
+
+With these basic helper functions, we can implement the first piece of
+our grammar: numeric literals.
+
+Basic Expression Parsing
+========================
+
+We start with numeric literals, because they are the simplest to
+process. For each production in our grammar, we'll define a function
+which parses that production. For numeric literals, we have:
+
+.. code-block:: c++
+
+ /// numberexpr ::= number
+ static ExprAST *ParseNumberExpr() {
+ ExprAST *Result = new NumberExprAST(NumVal);
+ getNextToken(); // consume the number
+ return Result;
+ }
+
+This routine is very simple: it expects to be called when the current
+token is a ``tok_number`` token. It takes the current number value,
+creates a ``NumberExprAST`` node, advances the lexer to the next token,
+and finally returns.
+
+There are some interesting aspects to this. The most important one is
+that this routine eats all of the tokens that correspond to the
+production and returns the lexer buffer with the next token (which is
+not part of the grammar production) ready to go. This is a fairly
+standard way to go for recursive descent parsers. For a better example,
+the parenthesis operator is defined like this:
+
+.. code-block:: c++
+
+ /// parenexpr ::= '(' expression ')'
+ static ExprAST *ParseParenExpr() {
+ getNextToken(); // eat (.
+ ExprAST *V = ParseExpression();
+ if (!V) return 0;
+
+ if (CurTok != ')')
+ return Error("expected ')'");
+ getNextToken(); // eat ).
+ return V;
+ }
+
+This function illustrates a number of interesting things about the
+parser:
+
+1) It shows how we use the Error routines. When called, this function
+expects that the current token is a '(' token, but after parsing the
+subexpression, it is possible that there is no ')' waiting. For example,
+if the user types in "(4 x" instead of "(4)", the parser should emit an
+error. Because errors can occur, the parser needs a way to indicate that
+they happened: in our parser, we return null on an error.
+
+2) Another interesting aspect of this function is that it uses recursion
+by calling ``ParseExpression`` (we will soon see that
+``ParseExpression`` can call ``ParseParenExpr``). This is powerful
+because it allows us to handle recursive grammars, and keeps each
+production very simple. Note that parentheses do not cause construction
+of AST nodes themselves. While we could do it this way, the most
+important role of parentheses are to guide the parser and provide
+grouping. Once the parser constructs the AST, parentheses are not
+needed.
+
+The next simple production is for handling variable references and
+function calls:
+
+.. code-block:: c++
+
+ /// identifierexpr
+ /// ::= identifier
+ /// ::= identifier '(' expression* ')'
+ static ExprAST *ParseIdentifierExpr() {
+ std::string IdName = IdentifierStr;
+
+ getNextToken(); // eat identifier.
+
+ if (CurTok != '(') // Simple variable ref.
+ return new VariableExprAST(IdName);
+
+ // Call.
+ getNextToken(); // eat (
+ std::vector<ExprAST*> Args;
+ if (CurTok != ')') {
+ while (1) {
+ ExprAST *Arg = ParseExpression();
+ if (!Arg) return 0;
+ Args.push_back(Arg);
+
+ if (CurTok == ')') break;
+
+ if (CurTok != ',')
+ return Error("Expected ')' or ',' in argument list");
+ getNextToken();
+ }
+ }
+
+ // Eat the ')'.
+ getNextToken();
+
+ return new CallExprAST(IdName, Args);
+ }
+
+This routine follows the same style as the other routines. (It expects
+to be called if the current token is a ``tok_identifier`` token). It
+also has recursion and error handling. One interesting aspect of this is
+that it uses *look-ahead* to determine if the current identifier is a
+stand alone variable reference or if it is a function call expression.
+It handles this by checking to see if the token after the identifier is
+a '(' token, constructing either a ``VariableExprAST`` or
+``CallExprAST`` node as appropriate.
+
+Now that we have all of our simple expression-parsing logic in place, we
+can define a helper function to wrap it together into one entry point.
+We call this class of expressions "primary" expressions, for reasons
+that will become more clear `later in the
+tutorial <LangImpl6.html#unary>`_. In order to parse an arbitrary
+primary expression, we need to determine what sort of expression it is:
+
+.. code-block:: c++
+
+ /// primary
+ /// ::= identifierexpr
+ /// ::= numberexpr
+ /// ::= parenexpr
+ static ExprAST *ParsePrimary() {
+ switch (CurTok) {
+ default: return Error("unknown token when expecting an expression");
+ case tok_identifier: return ParseIdentifierExpr();
+ case tok_number: return ParseNumberExpr();
+ case '(': return ParseParenExpr();
+ }
+ }
+
+Now that you see the definition of this function, it is more obvious why
+we can assume the state of CurTok in the various functions. This uses
+look-ahead to determine which sort of expression is being inspected, and
+then parses it with a function call.
+
+Now that basic expressions are handled, we need to handle binary
+expressions. They are a bit more complex.
+
+Binary Expression Parsing
+=========================
+
+Binary expressions are significantly harder to parse because they are
+often ambiguous. For example, when given the string "x+y\*z", the parser
+can choose to parse it as either "(x+y)\*z" or "x+(y\*z)". With common
+definitions from mathematics, we expect the later parse, because "\*"
+(multiplication) has higher *precedence* than "+" (addition).
+
+There are many ways to handle this, but an elegant and efficient way is
+to use `Operator-Precedence
+Parsing <http://en.wikipedia.org/wiki/Operator-precedence_parser>`_.
+This parsing technique uses the precedence of binary operators to guide
+recursion. To start with, we need a table of precedences:
+
+.. code-block:: c++
+
+ /// BinopPrecedence - This holds the precedence for each binary operator that is
+ /// defined.
+ static std::map<char, int> BinopPrecedence;
+
+ /// GetTokPrecedence - Get the precedence of the pending binary operator token.
+ static int GetTokPrecedence() {
+ if (!isascii(CurTok))
+ return -1;
+
+ // Make sure it's a declared binop.
+ int TokPrec = BinopPrecedence[CurTok];
+ if (TokPrec <= 0) return -1;
+ return TokPrec;
+ }
+
+ int main() {
+ // Install standard binary operators.
+ // 1 is lowest precedence.
+ BinopPrecedence['<'] = 10;
+ BinopPrecedence['+'] = 20;
+ BinopPrecedence['-'] = 20;
+ BinopPrecedence['*'] = 40; // highest.
+ ...
+ }
+
+For the basic form of Kaleidoscope, we will only support 4 binary
+operators (this can obviously be extended by you, our brave and intrepid
+reader). The ``GetTokPrecedence`` function returns the precedence for
+the current token, or -1 if the token is not a binary operator. Having a
+map makes it easy to add new operators and makes it clear that the
+algorithm doesn't depend on the specific operators involved, but it
+would be easy enough to eliminate the map and do the comparisons in the
+``GetTokPrecedence`` function. (Or just use a fixed-size array).
+
+With the helper above defined, we can now start parsing binary
+expressions. The basic idea of operator precedence parsing is to break
+down an expression with potentially ambiguous binary operators into
+pieces. Consider ,for example, the expression "a+b+(c+d)\*e\*f+g".
+Operator precedence parsing considers this as a stream of primary
+expressions separated by binary operators. As such, it will first parse
+the leading primary expression "a", then it will see the pairs [+, b]
+[+, (c+d)] [\*, e] [\*, f] and [+, g]. Note that because parentheses are
+primary expressions, the binary expression parser doesn't need to worry
+about nested subexpressions like (c+d) at all.
+
+To start, an expression is a primary expression potentially followed by
+a sequence of [binop,primaryexpr] pairs:
+
+.. code-block:: c++
+
+ /// expression
+ /// ::= primary binoprhs
+ ///
+ static ExprAST *ParseExpression() {
+ ExprAST *LHS = ParsePrimary();
+ if (!LHS) return 0;
+
+ return ParseBinOpRHS(0, LHS);
+ }
+
+``ParseBinOpRHS`` is the function that parses the sequence of pairs for
+us. It takes a precedence and a pointer to an expression for the part
+that has been parsed so far. Note that "x" is a perfectly valid
+expression: As such, "binoprhs" is allowed to be empty, in which case it
+returns the expression that is passed into it. In our example above, the
+code passes the expression for "a" into ``ParseBinOpRHS`` and the
+current token is "+".
+
+The precedence value passed into ``ParseBinOpRHS`` indicates the
+*minimal operator precedence* that the function is allowed to eat. For
+example, if the current pair stream is [+, x] and ``ParseBinOpRHS`` is
+passed in a precedence of 40, it will not consume any tokens (because
+the precedence of '+' is only 20). With this in mind, ``ParseBinOpRHS``
+starts with:
+
+.. code-block:: c++
+
+ /// binoprhs
+ /// ::= ('+' primary)*
+ static ExprAST *ParseBinOpRHS(int ExprPrec, ExprAST *LHS) {
+ // If this is a binop, find its precedence.
+ while (1) {
+ int TokPrec = GetTokPrecedence();
+
+ // If this is a binop that binds at least as tightly as the current binop,
+ // consume it, otherwise we are done.
+ if (TokPrec < ExprPrec)
+ return LHS;
+
+This code gets the precedence of the current token and checks to see if
+if is too low. Because we defined invalid tokens to have a precedence of
+-1, this check implicitly knows that the pair-stream ends when the token
+stream runs out of binary operators. If this check succeeds, we know
+that the token is a binary operator and that it will be included in this
+expression:
+
+.. code-block:: c++
+
+ // Okay, we know this is a binop.
+ int BinOp = CurTok;
+ getNextToken(); // eat binop
+
+ // Parse the primary expression after the binary operator.
+ ExprAST *RHS = ParsePrimary();
+ if (!RHS) return 0;
+
+As such, this code eats (and remembers) the binary operator and then
+parses the primary expression that follows. This builds up the whole
+pair, the first of which is [+, b] for the running example.
+
+Now that we parsed the left-hand side of an expression and one pair of
+the RHS sequence, we have to decide which way the expression associates.
+In particular, we could have "(a+b) binop unparsed" or "a + (b binop
+unparsed)". To determine this, we look ahead at "binop" to determine its
+precedence and compare it to BinOp's precedence (which is '+' in this
+case):
+
+.. code-block:: c++
+
+ // If BinOp binds less tightly with RHS than the operator after RHS, let
+ // the pending operator take RHS as its LHS.
+ int NextPrec = GetTokPrecedence();
+ if (TokPrec < NextPrec) {
+
+If the precedence of the binop to the right of "RHS" is lower or equal
+to the precedence of our current operator, then we know that the
+parentheses associate as "(a+b) binop ...". In our example, the current
+operator is "+" and the next operator is "+", we know that they have the
+same precedence. In this case we'll create the AST node for "a+b", and
+then continue parsing:
+
+.. code-block:: c++
+
+ ... if body omitted ...
+ }
+
+ // Merge LHS/RHS.
+ LHS = new BinaryExprAST(BinOp, LHS, RHS);
+ } // loop around to the top of the while loop.
+ }
+
+In our example above, this will turn "a+b+" into "(a+b)" and execute the
+next iteration of the loop, with "+" as the current token. The code
+above will eat, remember, and parse "(c+d)" as the primary expression,
+which makes the current pair equal to [+, (c+d)]. It will then evaluate
+the 'if' conditional above with "\*" as the binop to the right of the
+primary. In this case, the precedence of "\*" is higher than the
+precedence of "+" so the if condition will be entered.
+
+The critical question left here is "how can the if condition parse the
+right hand side in full"? In particular, to build the AST correctly for
+our example, it needs to get all of "(c+d)\*e\*f" as the RHS expression
+variable. The code to do this is surprisingly simple (code from the
+above two blocks duplicated for context):
+
+.. code-block:: c++
+
+ // If BinOp binds less tightly with RHS than the operator after RHS, let
+ // the pending operator take RHS as its LHS.
+ int NextPrec = GetTokPrecedence();
+ if (TokPrec < NextPrec) {
+ RHS = ParseBinOpRHS(TokPrec+1, RHS);
+ if (RHS == 0) return 0;
+ }
+ // Merge LHS/RHS.
+ LHS = new BinaryExprAST(BinOp, LHS, RHS);
+ } // loop around to the top of the while loop.
+ }
+
+At this point, we know that the binary operator to the RHS of our
+primary has higher precedence than the binop we are currently parsing.
+As such, we know that any sequence of pairs whose operators are all
+higher precedence than "+" should be parsed together and returned as
+"RHS". To do this, we recursively invoke the ``ParseBinOpRHS`` function
+specifying "TokPrec+1" as the minimum precedence required for it to
+continue. In our example above, this will cause it to return the AST
+node for "(c+d)\*e\*f" as RHS, which is then set as the RHS of the '+'
+expression.
+
+Finally, on the next iteration of the while loop, the "+g" piece is
+parsed and added to the AST. With this little bit of code (14
+non-trivial lines), we correctly handle fully general binary expression
+parsing in a very elegant way. This was a whirlwind tour of this code,
+and it is somewhat subtle. I recommend running through it with a few
+tough examples to see how it works.
+
+This wraps up handling of expressions. At this point, we can point the
+parser at an arbitrary token stream and build an expression from it,
+stopping at the first token that is not part of the expression. Next up
+we need to handle function definitions, etc.
+
+Parsing the Rest
+================
+
+The next thing missing is handling of function prototypes. In
+Kaleidoscope, these are used both for 'extern' function declarations as
+well as function body definitions. The code to do this is
+straight-forward and not very interesting (once you've survived
+expressions):
+
+.. code-block:: c++
+
+ /// prototype
+ /// ::= id '(' id* ')'
+ static PrototypeAST *ParsePrototype() {
+ if (CurTok != tok_identifier)
+ return ErrorP("Expected function name in prototype");
+
+ std::string FnName = IdentifierStr;
+ getNextToken();
+
+ if (CurTok != '(')
+ return ErrorP("Expected '(' in prototype");
+
+ // Read the list of argument names.
+ std::vector<std::string> ArgNames;
+ while (getNextToken() == tok_identifier)
+ ArgNames.push_back(IdentifierStr);
+ if (CurTok != ')')
+ return ErrorP("Expected ')' in prototype");
+
+ // success.
+ getNextToken(); // eat ')'.
+
+ return new PrototypeAST(FnName, ArgNames);
+ }
+
+Given this, a function definition is very simple, just a prototype plus
+an expression to implement the body:
+
+.. code-block:: c++
+
+ /// definition ::= 'def' prototype expression
+ static FunctionAST *ParseDefinition() {
+ getNextToken(); // eat def.
+ PrototypeAST *Proto = ParsePrototype();
+ if (Proto == 0) return 0;
+
+ if (ExprAST *E = ParseExpression())
+ return new FunctionAST(Proto, E);
+ return 0;
+ }
+
+In addition, we support 'extern' to declare functions like 'sin' and
+'cos' as well as to support forward declaration of user functions. These
+'extern's are just prototypes with no body:
+
+.. code-block:: c++
+
+ /// external ::= 'extern' prototype
+ static PrototypeAST *ParseExtern() {
+ getNextToken(); // eat extern.
+ return ParsePrototype();
+ }
+
+Finally, we'll also let the user type in arbitrary top-level expressions
+and evaluate them on the fly. We will handle this by defining anonymous
+nullary (zero argument) functions for them:
+
+.. code-block:: c++
+
+ /// toplevelexpr ::= expression
+ static FunctionAST *ParseTopLevelExpr() {
+ if (ExprAST *E = ParseExpression()) {
+ // Make an anonymous proto.
+ PrototypeAST *Proto = new PrototypeAST("", std::vector<std::string>());
+ return new FunctionAST(Proto, E);
+ }
+ return 0;
+ }
+
+Now that we have all the pieces, let's build a little driver that will
+let us actually *execute* this code we've built!
+
+The Driver
+==========
+
+The driver for this simply invokes all of the parsing pieces with a
+top-level dispatch loop. There isn't much interesting here, so I'll just
+include the top-level loop. See `below <#code>`_ for full code in the
+"Top-Level Parsing" section.
+
+.. code-block:: c++
+
+ /// top ::= definition | external | expression | ';'
+ static void MainLoop() {
+ while (1) {
+ fprintf(stderr, "ready> ");
+ switch (CurTok) {
+ case tok_eof: return;
+ case ';': getNextToken(); break; // ignore top-level semicolons.
+ case tok_def: HandleDefinition(); break;
+ case tok_extern: HandleExtern(); break;
+ default: HandleTopLevelExpression(); break;
+ }
+ }
+ }
+
+The most interesting part of this is that we ignore top-level
+semicolons. Why is this, you ask? The basic reason is that if you type
+"4 + 5" at the command line, the parser doesn't know whether that is the
+end of what you will type or not. For example, on the next line you
+could type "def foo..." in which case 4+5 is the end of a top-level
+expression. Alternatively you could type "\* 6", which would continue
+the expression. Having top-level semicolons allows you to type "4+5;",
+and the parser will know you are done.
+
+Conclusions
+===========
+
+With just under 400 lines of commented code (240 lines of non-comment,
+non-blank code), we fully defined our minimal language, including a
+lexer, parser, and AST builder. With this done, the executable will
+validate Kaleidoscope code and tell us if it is grammatically invalid.
+For example, here is a sample interaction:
+
+.. code-block:: bash
+
+ $ ./a.out
+ ready> def foo(x y) x+foo(y, 4.0);
+ Parsed a function definition.
+ ready> def foo(x y) x+y y;
+ Parsed a function definition.
+ Parsed a top-level expr
+ ready> def foo(x y) x+y );
+ Parsed a function definition.
+ Error: unknown token when expecting an expression
+ ready> extern sin(a);
+ ready> Parsed an extern
+ ready> ^D
+ $
+
+There is a lot of room for extension here. You can define new AST nodes,
+extend the language in many ways, etc. In the `next
+installment <LangImpl3.html>`_, we will describe how to generate LLVM
+Intermediate Representation (IR) from the AST.
+
+Full Code Listing
+=================
+
+Here is the complete code listing for this and the previous chapter.
+Note that it is fully self-contained: you don't need LLVM or any
+external libraries at all for this. (Besides the C and C++ standard
+libraries, of course.) To build this, just compile with:
+
+.. code-block:: bash
+
+ # Compile
+ clang++ -g -O3 toy.cpp
+ # Run
+ ./a.out
+
+Here is the code:
+
+.. literalinclude:: ../../examples/Kaleidoscope/Chapter2/toy.cpp
+ :language: c++
+
+`Next: Implementing Code Generation to LLVM IR <LangImpl3.html>`_
+
Added: www-releases/trunk/3.6.1/docs/_sources/tutorial/LangImpl3.txt
URL: http://llvm.org/viewvc/llvm-project/www-releases/trunk/3.6.1/docs/_sources/tutorial/LangImpl3.txt?rev=238135&view=auto
==============================================================================
--- www-releases/trunk/3.6.1/docs/_sources/tutorial/LangImpl3.txt (added)
+++ www-releases/trunk/3.6.1/docs/_sources/tutorial/LangImpl3.txt Mon May 25 08:53:02 2015
@@ -0,0 +1,594 @@
+========================================
+Kaleidoscope: Code generation to LLVM IR
+========================================
+
+.. contents::
+ :local:
+
+Chapter 3 Introduction
+======================
+
+Welcome to Chapter 3 of the "`Implementing a language with
+LLVM <index.html>`_" tutorial. This chapter shows you how to transform
+the `Abstract Syntax Tree <LangImpl2.html>`_, built in Chapter 2, into
+LLVM IR. This will teach you a little bit about how LLVM does things, as
+well as demonstrate how easy it is to use. It's much more work to build
+a lexer and parser than it is to generate LLVM IR code. :)
+
+**Please note**: the code in this chapter and later require LLVM 2.2 or
+later. LLVM 2.1 and before will not work with it. Also note that you
+need to use a version of this tutorial that matches your LLVM release:
+If you are using an official LLVM release, use the version of the
+documentation included with your release or on the `llvm.org releases
+page <http://llvm.org/releases/>`_.
+
+Code Generation Setup
+=====================
+
+In order to generate LLVM IR, we want some simple setup to get started.
+First we define virtual code generation (codegen) methods in each AST
+class:
+
+.. code-block:: c++
+
+ /// ExprAST - Base class for all expression nodes.
+ class ExprAST {
+ public:
+ virtual ~ExprAST() {}
+ virtual Value *Codegen() = 0;
+ };
+
+ /// NumberExprAST - Expression class for numeric literals like "1.0".
+ class NumberExprAST : public ExprAST {
+ double Val;
+ public:
+ NumberExprAST(double val) : Val(val) {}
+ virtual Value *Codegen();
+ };
+ ...
+
+The Codegen() method says to emit IR for that AST node along with all
+the things it depends on, and they all return an LLVM Value object.
+"Value" is the class used to represent a "`Static Single Assignment
+(SSA) <http://en.wikipedia.org/wiki/Static_single_assignment_form>`_
+register" or "SSA value" in LLVM. The most distinct aspect of SSA values
+is that their value is computed as the related instruction executes, and
+it does not get a new value until (and if) the instruction re-executes.
+In other words, there is no way to "change" an SSA value. For more
+information, please read up on `Static Single
+Assignment <http://en.wikipedia.org/wiki/Static_single_assignment_form>`_
+- the concepts are really quite natural once you grok them.
+
+Note that instead of adding virtual methods to the ExprAST class
+hierarchy, it could also make sense to use a `visitor
+pattern <http://en.wikipedia.org/wiki/Visitor_pattern>`_ or some other
+way to model this. Again, this tutorial won't dwell on good software
+engineering practices: for our purposes, adding a virtual method is
+simplest.
+
+The second thing we want is an "Error" method like we used for the
+parser, which will be used to report errors found during code generation
+(for example, use of an undeclared parameter):
+
+.. code-block:: c++
+
+ Value *ErrorV(const char *Str) { Error(Str); return 0; }
+
+ static Module *TheModule;
+ static IRBuilder<> Builder(getGlobalContext());
+ static std::map<std::string, Value*> NamedValues;
+
+The static variables will be used during code generation. ``TheModule``
+is the LLVM construct that contains all of the functions and global
+variables in a chunk of code. In many ways, it is the top-level
+structure that the LLVM IR uses to contain code.
+
+The ``Builder`` object is a helper object that makes it easy to generate
+LLVM instructions. Instances of the
+```IRBuilder`` <http://llvm.org/doxygen/IRBuilder_8h-source.html>`_
+class template keep track of the current place to insert instructions
+and has methods to create new instructions.
+
+The ``NamedValues`` map keeps track of which values are defined in the
+current scope and what their LLVM representation is. (In other words, it
+is a symbol table for the code). In this form of Kaleidoscope, the only
+things that can be referenced are function parameters. As such, function
+parameters will be in this map when generating code for their function
+body.
+
+With these basics in place, we can start talking about how to generate
+code for each expression. Note that this assumes that the ``Builder``
+has been set up to generate code *into* something. For now, we'll assume
+that this has already been done, and we'll just use it to emit code.
+
+Expression Code Generation
+==========================
+
+Generating LLVM code for expression nodes is very straightforward: less
+than 45 lines of commented code for all four of our expression nodes.
+First we'll do numeric literals:
+
+.. code-block:: c++
+
+ Value *NumberExprAST::Codegen() {
+ return ConstantFP::get(getGlobalContext(), APFloat(Val));
+ }
+
+In the LLVM IR, numeric constants are represented with the
+``ConstantFP`` class, which holds the numeric value in an ``APFloat``
+internally (``APFloat`` has the capability of holding floating point
+constants of Arbitrary Precision). This code basically just creates
+and returns a ``ConstantFP``. Note that in the LLVM IR that constants
+are all uniqued together and shared. For this reason, the API uses the
+"foo::get(...)" idiom instead of "new foo(..)" or "foo::Create(..)".
+
+.. code-block:: c++
+
+ Value *VariableExprAST::Codegen() {
+ // Look this variable up in the function.
+ Value *V = NamedValues[Name];
+ return V ? V : ErrorV("Unknown variable name");
+ }
+
+References to variables are also quite simple using LLVM. In the simple
+version of Kaleidoscope, we assume that the variable has already been
+emitted somewhere and its value is available. In practice, the only
+values that can be in the ``NamedValues`` map are function arguments.
+This code simply checks to see that the specified name is in the map (if
+not, an unknown variable is being referenced) and returns the value for
+it. In future chapters, we'll add support for `loop induction
+variables <LangImpl5.html#for>`_ in the symbol table, and for `local
+variables <LangImpl7.html#localvars>`_.
+
+.. code-block:: c++
+
+ Value *BinaryExprAST::Codegen() {
+ Value *L = LHS->Codegen();
+ Value *R = RHS->Codegen();
+ if (L == 0 || R == 0) return 0;
+
+ switch (Op) {
+ case '+': return Builder.CreateFAdd(L, R, "addtmp");
+ case '-': return Builder.CreateFSub(L, R, "subtmp");
+ case '*': return Builder.CreateFMul(L, R, "multmp");
+ case '<':
+ L = Builder.CreateFCmpULT(L, R, "cmptmp");
+ // Convert bool 0/1 to double 0.0 or 1.0
+ return Builder.CreateUIToFP(L, Type::getDoubleTy(getGlobalContext()),
+ "booltmp");
+ default: return ErrorV("invalid binary operator");
+ }
+ }
+
+Binary operators start to get more interesting. The basic idea here is
+that we recursively emit code for the left-hand side of the expression,
+then the right-hand side, then we compute the result of the binary
+expression. In this code, we do a simple switch on the opcode to create
+the right LLVM instruction.
+
+In the example above, the LLVM builder class is starting to show its
+value. IRBuilder knows where to insert the newly created instruction,
+all you have to do is specify what instruction to create (e.g. with
+``CreateFAdd``), which operands to use (``L`` and ``R`` here) and
+optionally provide a name for the generated instruction.
+
+One nice thing about LLVM is that the name is just a hint. For instance,
+if the code above emits multiple "addtmp" variables, LLVM will
+automatically provide each one with an increasing, unique numeric
+suffix. Local value names for instructions are purely optional, but it
+makes it much easier to read the IR dumps.
+
+`LLVM instructions <../LangRef.html#instref>`_ are constrained by strict
+rules: for example, the Left and Right operators of an `add
+instruction <../LangRef.html#i_add>`_ must have the same type, and the
+result type of the add must match the operand types. Because all values
+in Kaleidoscope are doubles, this makes for very simple code for add,
+sub and mul.
+
+On the other hand, LLVM specifies that the `fcmp
+instruction <../LangRef.html#i_fcmp>`_ always returns an 'i1' value (a
+one bit integer). The problem with this is that Kaleidoscope wants the
+value to be a 0.0 or 1.0 value. In order to get these semantics, we
+combine the fcmp instruction with a `uitofp
+instruction <../LangRef.html#i_uitofp>`_. This instruction converts its
+input integer into a floating point value by treating the input as an
+unsigned value. In contrast, if we used the `sitofp
+instruction <../LangRef.html#i_sitofp>`_, the Kaleidoscope '<' operator
+would return 0.0 and -1.0, depending on the input value.
+
+.. code-block:: c++
+
+ Value *CallExprAST::Codegen() {
+ // Look up the name in the global module table.
+ Function *CalleeF = TheModule->getFunction(Callee);
+ if (CalleeF == 0)
+ return ErrorV("Unknown function referenced");
+
+ // If argument mismatch error.
+ if (CalleeF->arg_size() != Args.size())
+ return ErrorV("Incorrect # arguments passed");
+
+ std::vector<Value*> ArgsV;
+ for (unsigned i = 0, e = Args.size(); i != e; ++i) {
+ ArgsV.push_back(Args[i]->Codegen());
+ if (ArgsV.back() == 0) return 0;
+ }
+
+ return Builder.CreateCall(CalleeF, ArgsV, "calltmp");
+ }
+
+Code generation for function calls is quite straightforward with LLVM.
+The code above initially does a function name lookup in the LLVM
+Module's symbol table. Recall that the LLVM Module is the container that
+holds all of the functions we are JIT'ing. By giving each function the
+same name as what the user specifies, we can use the LLVM symbol table
+to resolve function names for us.
+
+Once we have the function to call, we recursively codegen each argument
+that is to be passed in, and create an LLVM `call
+instruction <../LangRef.html#i_call>`_. Note that LLVM uses the native C
+calling conventions by default, allowing these calls to also call into
+standard library functions like "sin" and "cos", with no additional
+effort.
+
+This wraps up our handling of the four basic expressions that we have so
+far in Kaleidoscope. Feel free to go in and add some more. For example,
+by browsing the `LLVM language reference <../LangRef.html>`_ you'll find
+several other interesting instructions that are really easy to plug into
+our basic framework.
+
+Function Code Generation
+========================
+
+Code generation for prototypes and functions must handle a number of
+details, which make their code less beautiful than expression code
+generation, but allows us to illustrate some important points. First,
+lets talk about code generation for prototypes: they are used both for
+function bodies and external function declarations. The code starts
+with:
+
+.. code-block:: c++
+
+ Function *PrototypeAST::Codegen() {
+ // Make the function type: double(double,double) etc.
+ std::vector<Type*> Doubles(Args.size(),
+ Type::getDoubleTy(getGlobalContext()));
+ FunctionType *FT = FunctionType::get(Type::getDoubleTy(getGlobalContext()),
+ Doubles, false);
+
+ Function *F = Function::Create(FT, Function::ExternalLinkage, Name, TheModule);
+
+This code packs a lot of power into a few lines. Note first that this
+function returns a "Function\*" instead of a "Value\*". Because a
+"prototype" really talks about the external interface for a function
+(not the value computed by an expression), it makes sense for it to
+return the LLVM Function it corresponds to when codegen'd.
+
+The call to ``FunctionType::get`` creates the ``FunctionType`` that
+should be used for a given Prototype. Since all function arguments in
+Kaleidoscope are of type double, the first line creates a vector of "N"
+LLVM double types. It then uses the ``Functiontype::get`` method to
+create a function type that takes "N" doubles as arguments, returns one
+double as a result, and that is not vararg (the false parameter
+indicates this). Note that Types in LLVM are uniqued just like Constants
+are, so you don't "new" a type, you "get" it.
+
+The final line above actually creates the function that the prototype
+will correspond to. This indicates the type, linkage and name to use, as
+well as which module to insert into. "`external
+linkage <../LangRef.html#linkage>`_" means that the function may be
+defined outside the current module and/or that it is callable by
+functions outside the module. The Name passed in is the name the user
+specified: since "``TheModule``" is specified, this name is registered
+in "``TheModule``"s symbol table, which is used by the function call
+code above.
+
+.. code-block:: c++
+
+ // If F conflicted, there was already something named 'Name'. If it has a
+ // body, don't allow redefinition or reextern.
+ if (F->getName() != Name) {
+ // Delete the one we just made and get the existing one.
+ F->eraseFromParent();
+ F = TheModule->getFunction(Name);
+
+The Module symbol table works just like the Function symbol table when
+it comes to name conflicts: if a new function is created with a name
+that was previously added to the symbol table, the new function will get
+implicitly renamed when added to the Module. The code above exploits
+this fact to determine if there was a previous definition of this
+function.
+
+In Kaleidoscope, I choose to allow redefinitions of functions in two
+cases: first, we want to allow 'extern'ing a function more than once, as
+long as the prototypes for the externs match (since all arguments have
+the same type, we just have to check that the number of arguments
+match). Second, we want to allow 'extern'ing a function and then
+defining a body for it. This is useful when defining mutually recursive
+functions.
+
+In order to implement this, the code above first checks to see if there
+is a collision on the name of the function. If so, it deletes the
+function we just created (by calling ``eraseFromParent``) and then
+calling ``getFunction`` to get the existing function with the specified
+name. Note that many APIs in LLVM have "erase" forms and "remove" forms.
+The "remove" form unlinks the object from its parent (e.g. a Function
+from a Module) and returns it. The "erase" form unlinks the object and
+then deletes it.
+
+.. code-block:: c++
+
+ // If F already has a body, reject this.
+ if (!F->empty()) {
+ ErrorF("redefinition of function");
+ return 0;
+ }
+
+ // If F took a different number of args, reject.
+ if (F->arg_size() != Args.size()) {
+ ErrorF("redefinition of function with different # args");
+ return 0;
+ }
+ }
+
+In order to verify the logic above, we first check to see if the
+pre-existing function is "empty". In this case, empty means that it has
+no basic blocks in it, which means it has no body. If it has no body, it
+is a forward declaration. Since we don't allow anything after a full
+definition of the function, the code rejects this case. If the previous
+reference to a function was an 'extern', we simply verify that the
+number of arguments for that definition and this one match up. If not,
+we emit an error.
+
+.. code-block:: c++
+
+ // Set names for all arguments.
+ unsigned Idx = 0;
+ for (Function::arg_iterator AI = F->arg_begin(); Idx != Args.size();
+ ++AI, ++Idx) {
+ AI->setName(Args[Idx]);
+
+ // Add arguments to variable symbol table.
+ NamedValues[Args[Idx]] = AI;
+ }
+ return F;
+ }
+
+The last bit of code for prototypes loops over all of the arguments in
+the function, setting the name of the LLVM Argument objects to match,
+and registering the arguments in the ``NamedValues`` map for future use
+by the ``VariableExprAST`` AST node. Once this is set up, it returns the
+Function object to the caller. Note that we don't check for conflicting
+argument names here (e.g. "extern foo(a b a)"). Doing so would be very
+straight-forward with the mechanics we have already used above.
+
+.. code-block:: c++
+
+ Function *FunctionAST::Codegen() {
+ NamedValues.clear();
+
+ Function *TheFunction = Proto->Codegen();
+ if (TheFunction == 0)
+ return 0;
+
+Code generation for function definitions starts out simply enough: we
+just codegen the prototype (Proto) and verify that it is ok. We then
+clear out the ``NamedValues`` map to make sure that there isn't anything
+in it from the last function we compiled. Code generation of the
+prototype ensures that there is an LLVM Function object that is ready to
+go for us.
+
+.. code-block:: c++
+
+ // Create a new basic block to start insertion into.
+ BasicBlock *BB = BasicBlock::Create(getGlobalContext(), "entry", TheFunction);
+ Builder.SetInsertPoint(BB);
+
+ if (Value *RetVal = Body->Codegen()) {
+
+Now we get to the point where the ``Builder`` is set up. The first line
+creates a new `basic block <http://en.wikipedia.org/wiki/Basic_block>`_
+(named "entry"), which is inserted into ``TheFunction``. The second line
+then tells the builder that new instructions should be inserted into the
+end of the new basic block. Basic blocks in LLVM are an important part
+of functions that define the `Control Flow
+Graph <http://en.wikipedia.org/wiki/Control_flow_graph>`_. Since we
+don't have any control flow, our functions will only contain one block
+at this point. We'll fix this in `Chapter 5 <LangImpl5.html>`_ :).
+
+.. code-block:: c++
+
+ if (Value *RetVal = Body->Codegen()) {
+ // Finish off the function.
+ Builder.CreateRet(RetVal);
+
+ // Validate the generated code, checking for consistency.
+ verifyFunction(*TheFunction);
+
+ return TheFunction;
+ }
+
+Once the insertion point is set up, we call the ``CodeGen()`` method for
+the root expression of the function. If no error happens, this emits
+code to compute the expression into the entry block and returns the
+value that was computed. Assuming no error, we then create an LLVM `ret
+instruction <../LangRef.html#i_ret>`_, which completes the function.
+Once the function is built, we call ``verifyFunction``, which is
+provided by LLVM. This function does a variety of consistency checks on
+the generated code, to determine if our compiler is doing everything
+right. Using this is important: it can catch a lot of bugs. Once the
+function is finished and validated, we return it.
+
+.. code-block:: c++
+
+ // Error reading body, remove function.
+ TheFunction->eraseFromParent();
+ return 0;
+ }
+
+The only piece left here is handling of the error case. For simplicity,
+we handle this by merely deleting the function we produced with the
+``eraseFromParent`` method. This allows the user to redefine a function
+that they incorrectly typed in before: if we didn't delete it, it would
+live in the symbol table, with a body, preventing future redefinition.
+
+This code does have a bug, though. Since the ``PrototypeAST::Codegen``
+can return a previously defined forward declaration, our code can
+actually delete a forward declaration. There are a number of ways to fix
+this bug, see what you can come up with! Here is a testcase:
+
+::
+
+ extern foo(a b); # ok, defines foo.
+ def foo(a b) c; # error, 'c' is invalid.
+ def bar() foo(1, 2); # error, unknown function "foo"
+
+Driver Changes and Closing Thoughts
+===================================
+
+For now, code generation to LLVM doesn't really get us much, except that
+we can look at the pretty IR calls. The sample code inserts calls to
+Codegen into the "``HandleDefinition``", "``HandleExtern``" etc
+functions, and then dumps out the LLVM IR. This gives a nice way to look
+at the LLVM IR for simple functions. For example:
+
+::
+
+ ready> 4+5;
+ Read top-level expression:
+ define double @0() {
+ entry:
+ ret double 9.000000e+00
+ }
+
+Note how the parser turns the top-level expression into anonymous
+functions for us. This will be handy when we add `JIT
+support <LangImpl4.html#jit>`_ in the next chapter. Also note that the
+code is very literally transcribed, no optimizations are being performed
+except simple constant folding done by IRBuilder. We will `add
+optimizations <LangImpl4.html#trivialconstfold>`_ explicitly in the next
+chapter.
+
+::
+
+ ready> def foo(a b) a*a + 2*a*b + b*b;
+ Read function definition:
+ define double @foo(double %a, double %b) {
+ entry:
+ %multmp = fmul double %a, %a
+ %multmp1 = fmul double 2.000000e+00, %a
+ %multmp2 = fmul double %multmp1, %b
+ %addtmp = fadd double %multmp, %multmp2
+ %multmp3 = fmul double %b, %b
+ %addtmp4 = fadd double %addtmp, %multmp3
+ ret double %addtmp4
+ }
+
+This shows some simple arithmetic. Notice the striking similarity to the
+LLVM builder calls that we use to create the instructions.
+
+::
+
+ ready> def bar(a) foo(a, 4.0) + bar(31337);
+ Read function definition:
+ define double @bar(double %a) {
+ entry:
+ %calltmp = call double @foo(double %a, double 4.000000e+00)
+ %calltmp1 = call double @bar(double 3.133700e+04)
+ %addtmp = fadd double %calltmp, %calltmp1
+ ret double %addtmp
+ }
+
+This shows some function calls. Note that this function will take a long
+time to execute if you call it. In the future we'll add conditional
+control flow to actually make recursion useful :).
+
+::
+
+ ready> extern cos(x);
+ Read extern:
+ declare double @cos(double)
+
+ ready> cos(1.234);
+ Read top-level expression:
+ define double @1() {
+ entry:
+ %calltmp = call double @cos(double 1.234000e+00)
+ ret double %calltmp
+ }
+
+This shows an extern for the libm "cos" function, and a call to it.
+
+.. TODO:: Abandon Pygments' horrible `llvm` lexer. It just totally gives up
+ on highlighting this due to the first line.
+
+::
+
+ ready> ^D
+ ; ModuleID = 'my cool jit'
+
+ define double @0() {
+ entry:
+ %addtmp = fadd double 4.000000e+00, 5.000000e+00
+ ret double %addtmp
+ }
+
+ define double @foo(double %a, double %b) {
+ entry:
+ %multmp = fmul double %a, %a
+ %multmp1 = fmul double 2.000000e+00, %a
+ %multmp2 = fmul double %multmp1, %b
+ %addtmp = fadd double %multmp, %multmp2
+ %multmp3 = fmul double %b, %b
+ %addtmp4 = fadd double %addtmp, %multmp3
+ ret double %addtmp4
+ }
+
+ define double @bar(double %a) {
+ entry:
+ %calltmp = call double @foo(double %a, double 4.000000e+00)
+ %calltmp1 = call double @bar(double 3.133700e+04)
+ %addtmp = fadd double %calltmp, %calltmp1
+ ret double %addtmp
+ }
+
+ declare double @cos(double)
+
+ define double @1() {
+ entry:
+ %calltmp = call double @cos(double 1.234000e+00)
+ ret double %calltmp
+ }
+
+When you quit the current demo, it dumps out the IR for the entire
+module generated. Here you can see the big picture with all the
+functions referencing each other.
+
+This wraps up the third chapter of the Kaleidoscope tutorial. Up next,
+we'll describe how to `add JIT codegen and optimizer
+support <LangImpl4.html>`_ to this so we can actually start running
+code!
+
+Full Code Listing
+=================
+
+Here is the complete code listing for our running example, enhanced with
+the LLVM code generator. Because this uses the LLVM libraries, we need
+to link them in. To do this, we use the
+`llvm-config <http://llvm.org/cmds/llvm-config.html>`_ tool to inform
+our makefile/command line about which options to use:
+
+.. code-block:: bash
+
+ # Compile
+ clang++ -g -O3 toy.cpp `llvm-config --cxxflags --ldflags --system-libs --libs core` -o toy
+ # Run
+ ./toy
+
+Here is the code:
+
+.. literalinclude:: ../../examples/Kaleidoscope/Chapter3/toy.cpp
+ :language: c++
+
+`Next: Adding JIT and Optimizer Support <LangImpl4.html>`_
+
Added: www-releases/trunk/3.6.1/docs/_sources/tutorial/LangImpl4.txt
URL: http://llvm.org/viewvc/llvm-project/www-releases/trunk/3.6.1/docs/_sources/tutorial/LangImpl4.txt?rev=238135&view=auto
==============================================================================
--- www-releases/trunk/3.6.1/docs/_sources/tutorial/LangImpl4.txt (added)
+++ www-releases/trunk/3.6.1/docs/_sources/tutorial/LangImpl4.txt Mon May 25 08:53:02 2015
@@ -0,0 +1,445 @@
+==============================================
+Kaleidoscope: Adding JIT and Optimizer Support
+==============================================
+
+.. contents::
+ :local:
+
+Chapter 4 Introduction
+======================
+
+Welcome to Chapter 4 of the "`Implementing a language with
+LLVM <index.html>`_" tutorial. Chapters 1-3 described the implementation
+of a simple language and added support for generating LLVM IR. This
+chapter describes two new techniques: adding optimizer support to your
+language, and adding JIT compiler support. These additions will
+demonstrate how to get nice, efficient code for the Kaleidoscope
+language.
+
+Trivial Constant Folding
+========================
+
+Our demonstration for Chapter 3 is elegant and easy to extend.
+Unfortunately, it does not produce wonderful code. The IRBuilder,
+however, does give us obvious optimizations when compiling simple code:
+
+::
+
+ ready> def test(x) 1+2+x;
+ Read function definition:
+ define double @test(double %x) {
+ entry:
+ %addtmp = fadd double 3.000000e+00, %x
+ ret double %addtmp
+ }
+
+This code is not a literal transcription of the AST built by parsing the
+input. That would be:
+
+::
+
+ ready> def test(x) 1+2+x;
+ Read function definition:
+ define double @test(double %x) {
+ entry:
+ %addtmp = fadd double 2.000000e+00, 1.000000e+00
+ %addtmp1 = fadd double %addtmp, %x
+ ret double %addtmp1
+ }
+
+Constant folding, as seen above, in particular, is a very common and
+very important optimization: so much so that many language implementors
+implement constant folding support in their AST representation.
+
+With LLVM, you don't need this support in the AST. Since all calls to
+build LLVM IR go through the LLVM IR builder, the builder itself checked
+to see if there was a constant folding opportunity when you call it. If
+so, it just does the constant fold and return the constant instead of
+creating an instruction.
+
+Well, that was easy :). In practice, we recommend always using
+``IRBuilder`` when generating code like this. It has no "syntactic
+overhead" for its use (you don't have to uglify your compiler with
+constant checks everywhere) and it can dramatically reduce the amount of
+LLVM IR that is generated in some cases (particular for languages with a
+macro preprocessor or that use a lot of constants).
+
+On the other hand, the ``IRBuilder`` is limited by the fact that it does
+all of its analysis inline with the code as it is built. If you take a
+slightly more complex example:
+
+::
+
+ ready> def test(x) (1+2+x)*(x+(1+2));
+ ready> Read function definition:
+ define double @test(double %x) {
+ entry:
+ %addtmp = fadd double 3.000000e+00, %x
+ %addtmp1 = fadd double %x, 3.000000e+00
+ %multmp = fmul double %addtmp, %addtmp1
+ ret double %multmp
+ }
+
+In this case, the LHS and RHS of the multiplication are the same value.
+We'd really like to see this generate "``tmp = x+3; result = tmp*tmp;``"
+instead of computing "``x+3``" twice.
+
+Unfortunately, no amount of local analysis will be able to detect and
+correct this. This requires two transformations: reassociation of
+expressions (to make the add's lexically identical) and Common
+Subexpression Elimination (CSE) to delete the redundant add instruction.
+Fortunately, LLVM provides a broad range of optimizations that you can
+use, in the form of "passes".
+
+LLVM Optimization Passes
+========================
+
+LLVM provides many optimization passes, which do many different sorts of
+things and have different tradeoffs. Unlike other systems, LLVM doesn't
+hold to the mistaken notion that one set of optimizations is right for
+all languages and for all situations. LLVM allows a compiler implementor
+to make complete decisions about what optimizations to use, in which
+order, and in what situation.
+
+As a concrete example, LLVM supports both "whole module" passes, which
+look across as large of body of code as they can (often a whole file,
+but if run at link time, this can be a substantial portion of the whole
+program). It also supports and includes "per-function" passes which just
+operate on a single function at a time, without looking at other
+functions. For more information on passes and how they are run, see the
+`How to Write a Pass <../WritingAnLLVMPass.html>`_ document and the
+`List of LLVM Passes <../Passes.html>`_.
+
+For Kaleidoscope, we are currently generating functions on the fly, one
+at a time, as the user types them in. We aren't shooting for the
+ultimate optimization experience in this setting, but we also want to
+catch the easy and quick stuff where possible. As such, we will choose
+to run a few per-function optimizations as the user types the function
+in. If we wanted to make a "static Kaleidoscope compiler", we would use
+exactly the code we have now, except that we would defer running the
+optimizer until the entire file has been parsed.
+
+In order to get per-function optimizations going, we need to set up a
+`FunctionPassManager <../WritingAnLLVMPass.html#passmanager>`_ to hold
+and organize the LLVM optimizations that we want to run. Once we have
+that, we can add a set of optimizations to run. The code looks like
+this:
+
+.. code-block:: c++
+
+ FunctionPassManager OurFPM(TheModule);
+
+ // Set up the optimizer pipeline. Start with registering info about how the
+ // target lays out data structures.
+ OurFPM.add(new DataLayout(*TheExecutionEngine->getDataLayout()));
+ // Provide basic AliasAnalysis support for GVN.
+ OurFPM.add(createBasicAliasAnalysisPass());
+ // Do simple "peephole" optimizations and bit-twiddling optzns.
+ OurFPM.add(createInstructionCombiningPass());
+ // Reassociate expressions.
+ OurFPM.add(createReassociatePass());
+ // Eliminate Common SubExpressions.
+ OurFPM.add(createGVNPass());
+ // Simplify the control flow graph (deleting unreachable blocks, etc).
+ OurFPM.add(createCFGSimplificationPass());
+
+ OurFPM.doInitialization();
+
+ // Set the global so the code gen can use this.
+ TheFPM = &OurFPM;
+
+ // Run the main "interpreter loop" now.
+ MainLoop();
+
+This code defines a ``FunctionPassManager``, "``OurFPM``". It requires a
+pointer to the ``Module`` to construct itself. Once it is set up, we use
+a series of "add" calls to add a bunch of LLVM passes. The first pass is
+basically boilerplate, it adds a pass so that later optimizations know
+how the data structures in the program are laid out. The
+"``TheExecutionEngine``" variable is related to the JIT, which we will
+get to in the next section.
+
+In this case, we choose to add 4 optimization passes. The passes we
+chose here are a pretty standard set of "cleanup" optimizations that are
+useful for a wide variety of code. I won't delve into what they do but,
+believe me, they are a good starting place :).
+
+Once the PassManager is set up, we need to make use of it. We do this by
+running it after our newly created function is constructed (in
+``FunctionAST::Codegen``), but before it is returned to the client:
+
+.. code-block:: c++
+
+ if (Value *RetVal = Body->Codegen()) {
+ // Finish off the function.
+ Builder.CreateRet(RetVal);
+
+ // Validate the generated code, checking for consistency.
+ verifyFunction(*TheFunction);
+
+ // Optimize the function.
+ TheFPM->run(*TheFunction);
+
+ return TheFunction;
+ }
+
+As you can see, this is pretty straightforward. The
+``FunctionPassManager`` optimizes and updates the LLVM Function\* in
+place, improving (hopefully) its body. With this in place, we can try
+our test above again:
+
+::
+
+ ready> def test(x) (1+2+x)*(x+(1+2));
+ ready> Read function definition:
+ define double @test(double %x) {
+ entry:
+ %addtmp = fadd double %x, 3.000000e+00
+ %multmp = fmul double %addtmp, %addtmp
+ ret double %multmp
+ }
+
+As expected, we now get our nicely optimized code, saving a floating
+point add instruction from every execution of this function.
+
+LLVM provides a wide variety of optimizations that can be used in
+certain circumstances. Some `documentation about the various
+passes <../Passes.html>`_ is available, but it isn't very complete.
+Another good source of ideas can come from looking at the passes that
+``Clang`` runs to get started. The "``opt``" tool allows you to
+experiment with passes from the command line, so you can see if they do
+anything.
+
+Now that we have reasonable code coming out of our front-end, lets talk
+about executing it!
+
+Adding a JIT Compiler
+=====================
+
+Code that is available in LLVM IR can have a wide variety of tools
+applied to it. For example, you can run optimizations on it (as we did
+above), you can dump it out in textual or binary forms, you can compile
+the code to an assembly file (.s) for some target, or you can JIT
+compile it. The nice thing about the LLVM IR representation is that it
+is the "common currency" between many different parts of the compiler.
+
+In this section, we'll add JIT compiler support to our interpreter. The
+basic idea that we want for Kaleidoscope is to have the user enter
+function bodies as they do now, but immediately evaluate the top-level
+expressions they type in. For example, if they type in "1 + 2;", we
+should evaluate and print out 3. If they define a function, they should
+be able to call it from the command line.
+
+In order to do this, we first declare and initialize the JIT. This is
+done by adding a global variable and a call in ``main``:
+
+.. code-block:: c++
+
+ static ExecutionEngine *TheExecutionEngine;
+ ...
+ int main() {
+ ..
+ // Create the JIT. This takes ownership of the module.
+ TheExecutionEngine = EngineBuilder(TheModule).create();
+ ..
+ }
+
+This creates an abstract "Execution Engine" which can be either a JIT
+compiler or the LLVM interpreter. LLVM will automatically pick a JIT
+compiler for you if one is available for your platform, otherwise it
+will fall back to the interpreter.
+
+Once the ``ExecutionEngine`` is created, the JIT is ready to be used.
+There are a variety of APIs that are useful, but the simplest one is the
+"``getPointerToFunction(F)``" method. This method JIT compiles the
+specified LLVM Function and returns a function pointer to the generated
+machine code. In our case, this means that we can change the code that
+parses a top-level expression to look like this:
+
+.. code-block:: c++
+
+ static void HandleTopLevelExpression() {
+ // Evaluate a top-level expression into an anonymous function.
+ if (FunctionAST *F = ParseTopLevelExpr()) {
+ if (Function *LF = F->Codegen()) {
+ LF->dump(); // Dump the function for exposition purposes.
+
+ // JIT the function, returning a function pointer.
+ void *FPtr = TheExecutionEngine->getPointerToFunction(LF);
+
+ // Cast it to the right type (takes no arguments, returns a double) so we
+ // can call it as a native function.
+ double (*FP)() = (double (*)())(intptr_t)FPtr;
+ fprintf(stderr, "Evaluated to %f\n", FP());
+ }
+
+Recall that we compile top-level expressions into a self-contained LLVM
+function that takes no arguments and returns the computed double.
+Because the LLVM JIT compiler matches the native platform ABI, this
+means that you can just cast the result pointer to a function pointer of
+that type and call it directly. This means, there is no difference
+between JIT compiled code and native machine code that is statically
+linked into your application.
+
+With just these two changes, lets see how Kaleidoscope works now!
+
+::
+
+ ready> 4+5;
+ Read top-level expression:
+ define double @0() {
+ entry:
+ ret double 9.000000e+00
+ }
+
+ Evaluated to 9.000000
+
+Well this looks like it is basically working. The dump of the function
+shows the "no argument function that always returns double" that we
+synthesize for each top-level expression that is typed in. This
+demonstrates very basic functionality, but can we do more?
+
+::
+
+ ready> def testfunc(x y) x + y*2;
+ Read function definition:
+ define double @testfunc(double %x, double %y) {
+ entry:
+ %multmp = fmul double %y, 2.000000e+00
+ %addtmp = fadd double %multmp, %x
+ ret double %addtmp
+ }
+
+ ready> testfunc(4, 10);
+ Read top-level expression:
+ define double @1() {
+ entry:
+ %calltmp = call double @testfunc(double 4.000000e+00, double 1.000000e+01)
+ ret double %calltmp
+ }
+
+ Evaluated to 24.000000
+
+This illustrates that we can now call user code, but there is something
+a bit subtle going on here. Note that we only invoke the JIT on the
+anonymous functions that *call testfunc*, but we never invoked it on
+*testfunc* itself. What actually happened here is that the JIT scanned
+for all non-JIT'd functions transitively called from the anonymous
+function and compiled all of them before returning from
+``getPointerToFunction()``.
+
+The JIT provides a number of other more advanced interfaces for things
+like freeing allocated machine code, rejit'ing functions to update them,
+etc. However, even with this simple code, we get some surprisingly
+powerful capabilities - check this out (I removed the dump of the
+anonymous functions, you should get the idea by now :) :
+
+::
+
+ ready> extern sin(x);
+ Read extern:
+ declare double @sin(double)
+
+ ready> extern cos(x);
+ Read extern:
+ declare double @cos(double)
+
+ ready> sin(1.0);
+ Read top-level expression:
+ define double @2() {
+ entry:
+ ret double 0x3FEAED548F090CEE
+ }
+
+ Evaluated to 0.841471
+
+ ready> def foo(x) sin(x)*sin(x) + cos(x)*cos(x);
+ Read function definition:
+ define double @foo(double %x) {
+ entry:
+ %calltmp = call double @sin(double %x)
+ %multmp = fmul double %calltmp, %calltmp
+ %calltmp2 = call double @cos(double %x)
+ %multmp4 = fmul double %calltmp2, %calltmp2
+ %addtmp = fadd double %multmp, %multmp4
+ ret double %addtmp
+ }
+
+ ready> foo(4.0);
+ Read top-level expression:
+ define double @3() {
+ entry:
+ %calltmp = call double @foo(double 4.000000e+00)
+ ret double %calltmp
+ }
+
+ Evaluated to 1.000000
+
+Whoa, how does the JIT know about sin and cos? The answer is
+surprisingly simple: in this example, the JIT started execution of a
+function and got to a function call. It realized that the function was
+not yet JIT compiled and invoked the standard set of routines to resolve
+the function. In this case, there is no body defined for the function,
+so the JIT ended up calling "``dlsym("sin")``" on the Kaleidoscope
+process itself. Since "``sin``" is defined within the JIT's address
+space, it simply patches up calls in the module to call the libm version
+of ``sin`` directly.
+
+The LLVM JIT provides a number of interfaces (look in the
+``ExecutionEngine.h`` file) for controlling how unknown functions get
+resolved. It allows you to establish explicit mappings between IR
+objects and addresses (useful for LLVM global variables that you want to
+map to static tables, for example), allows you to dynamically decide on
+the fly based on the function name, and even allows you to have the JIT
+compile functions lazily the first time they're called.
+
+One interesting application of this is that we can now extend the
+language by writing arbitrary C++ code to implement operations. For
+example, if we add:
+
+.. code-block:: c++
+
+ /// putchard - putchar that takes a double and returns 0.
+ extern "C"
+ double putchard(double X) {
+ putchar((char)X);
+ return 0;
+ }
+
+Now we can produce simple output to the console by using things like:
+"``extern putchard(x); putchard(120);``", which prints a lowercase 'x'
+on the console (120 is the ASCII code for 'x'). Similar code could be
+used to implement file I/O, console input, and many other capabilities
+in Kaleidoscope.
+
+This completes the JIT and optimizer chapter of the Kaleidoscope
+tutorial. At this point, we can compile a non-Turing-complete
+programming language, optimize and JIT compile it in a user-driven way.
+Next up we'll look into `extending the language with control flow
+constructs <LangImpl5.html>`_, tackling some interesting LLVM IR issues
+along the way.
+
+Full Code Listing
+=================
+
+Here is the complete code listing for our running example, enhanced with
+the LLVM JIT and optimizer. To build this example, use:
+
+.. code-block:: bash
+
+ # Compile
+ clang++ -g toy.cpp `llvm-config --cxxflags --ldflags --system-libs --libs core mcjit native` -O3 -o toy
+ # Run
+ ./toy
+
+If you are compiling this on Linux, make sure to add the "-rdynamic"
+option as well. This makes sure that the external functions are resolved
+properly at runtime.
+
+Here is the code:
+
+.. literalinclude:: ../../examples/Kaleidoscope/Chapter4/toy.cpp
+ :language: c++
+
+`Next: Extending the language: control flow <LangImpl5.html>`_
+
Added: www-releases/trunk/3.6.1/docs/_sources/tutorial/LangImpl5.txt
URL: http://llvm.org/viewvc/llvm-project/www-releases/trunk/3.6.1/docs/_sources/tutorial/LangImpl5.txt?rev=238135&view=auto
==============================================================================
--- www-releases/trunk/3.6.1/docs/_sources/tutorial/LangImpl5.txt (added)
+++ www-releases/trunk/3.6.1/docs/_sources/tutorial/LangImpl5.txt Mon May 25 08:53:02 2015
@@ -0,0 +1,749 @@
+==================================================
+Kaleidoscope: Extending the Language: Control Flow
+==================================================
+
+.. contents::
+ :local:
+
+Chapter 5 Introduction
+======================
+
+Welcome to Chapter 5 of the "`Implementing a language with
+LLVM <index.html>`_" tutorial. Parts 1-4 described the implementation of
+the simple Kaleidoscope language and included support for generating
+LLVM IR, followed by optimizations and a JIT compiler. Unfortunately, as
+presented, Kaleidoscope is mostly useless: it has no control flow other
+than call and return. This means that you can't have conditional
+branches in the code, significantly limiting its power. In this episode
+of "build that compiler", we'll extend Kaleidoscope to have an
+if/then/else expression plus a simple 'for' loop.
+
+If/Then/Else
+============
+
+Extending Kaleidoscope to support if/then/else is quite straightforward.
+It basically requires adding support for this "new" concept to the
+lexer, parser, AST, and LLVM code emitter. This example is nice, because
+it shows how easy it is to "grow" a language over time, incrementally
+extending it as new ideas are discovered.
+
+Before we get going on "how" we add this extension, lets talk about
+"what" we want. The basic idea is that we want to be able to write this
+sort of thing:
+
+::
+
+ def fib(x)
+ if x < 3 then
+ 1
+ else
+ fib(x-1)+fib(x-2);
+
+In Kaleidoscope, every construct is an expression: there are no
+statements. As such, the if/then/else expression needs to return a value
+like any other. Since we're using a mostly functional form, we'll have
+it evaluate its conditional, then return the 'then' or 'else' value
+based on how the condition was resolved. This is very similar to the C
+"?:" expression.
+
+The semantics of the if/then/else expression is that it evaluates the
+condition to a boolean equality value: 0.0 is considered to be false and
+everything else is considered to be true. If the condition is true, the
+first subexpression is evaluated and returned, if the condition is
+false, the second subexpression is evaluated and returned. Since
+Kaleidoscope allows side-effects, this behavior is important to nail
+down.
+
+Now that we know what we "want", lets break this down into its
+constituent pieces.
+
+Lexer Extensions for If/Then/Else
+---------------------------------
+
+The lexer extensions are straightforward. First we add new enum values
+for the relevant tokens:
+
+.. code-block:: c++
+
+ // control
+ tok_if = -6, tok_then = -7, tok_else = -8,
+
+Once we have that, we recognize the new keywords in the lexer. This is
+pretty simple stuff:
+
+.. code-block:: c++
+
+ ...
+ if (IdentifierStr == "def") return tok_def;
+ if (IdentifierStr == "extern") return tok_extern;
+ if (IdentifierStr == "if") return tok_if;
+ if (IdentifierStr == "then") return tok_then;
+ if (IdentifierStr == "else") return tok_else;
+ return tok_identifier;
+
+AST Extensions for If/Then/Else
+-------------------------------
+
+To represent the new expression we add a new AST node for it:
+
+.. code-block:: c++
+
+ /// IfExprAST - Expression class for if/then/else.
+ class IfExprAST : public ExprAST {
+ ExprAST *Cond, *Then, *Else;
+ public:
+ IfExprAST(ExprAST *cond, ExprAST *then, ExprAST *_else)
+ : Cond(cond), Then(then), Else(_else) {}
+ virtual Value *Codegen();
+ };
+
+The AST node just has pointers to the various subexpressions.
+
+Parser Extensions for If/Then/Else
+----------------------------------
+
+Now that we have the relevant tokens coming from the lexer and we have
+the AST node to build, our parsing logic is relatively straightforward.
+First we define a new parsing function:
+
+.. code-block:: c++
+
+ /// ifexpr ::= 'if' expression 'then' expression 'else' expression
+ static ExprAST *ParseIfExpr() {
+ getNextToken(); // eat the if.
+
+ // condition.
+ ExprAST *Cond = ParseExpression();
+ if (!Cond) return 0;
+
+ if (CurTok != tok_then)
+ return Error("expected then");
+ getNextToken(); // eat the then
+
+ ExprAST *Then = ParseExpression();
+ if (Then == 0) return 0;
+
+ if (CurTok != tok_else)
+ return Error("expected else");
+
+ getNextToken();
+
+ ExprAST *Else = ParseExpression();
+ if (!Else) return 0;
+
+ return new IfExprAST(Cond, Then, Else);
+ }
+
+Next we hook it up as a primary expression:
+
+.. code-block:: c++
+
+ static ExprAST *ParsePrimary() {
+ switch (CurTok) {
+ default: return Error("unknown token when expecting an expression");
+ case tok_identifier: return ParseIdentifierExpr();
+ case tok_number: return ParseNumberExpr();
+ case '(': return ParseParenExpr();
+ case tok_if: return ParseIfExpr();
+ }
+ }
+
+LLVM IR for If/Then/Else
+------------------------
+
+Now that we have it parsing and building the AST, the final piece is
+adding LLVM code generation support. This is the most interesting part
+of the if/then/else example, because this is where it starts to
+introduce new concepts. All of the code above has been thoroughly
+described in previous chapters.
+
+To motivate the code we want to produce, lets take a look at a simple
+example. Consider:
+
+::
+
+ extern foo();
+ extern bar();
+ def baz(x) if x then foo() else bar();
+
+If you disable optimizations, the code you'll (soon) get from
+Kaleidoscope looks like this:
+
+.. code-block:: llvm
+
+ declare double @foo()
+
+ declare double @bar()
+
+ define double @baz(double %x) {
+ entry:
+ %ifcond = fcmp one double %x, 0.000000e+00
+ br i1 %ifcond, label %then, label %else
+
+ then: ; preds = %entry
+ %calltmp = call double @foo()
+ br label %ifcont
+
+ else: ; preds = %entry
+ %calltmp1 = call double @bar()
+ br label %ifcont
+
+ ifcont: ; preds = %else, %then
+ %iftmp = phi double [ %calltmp, %then ], [ %calltmp1, %else ]
+ ret double %iftmp
+ }
+
+To visualize the control flow graph, you can use a nifty feature of the
+LLVM '`opt <http://llvm.org/cmds/opt.html>`_' tool. If you put this LLVM
+IR into "t.ll" and run "``llvm-as < t.ll | opt -analyze -view-cfg``", `a
+window will pop up <../ProgrammersManual.html#ViewGraph>`_ and you'll
+see this graph:
+
+.. figure:: LangImpl5-cfg.png
+ :align: center
+ :alt: Example CFG
+
+ Example CFG
+
+Another way to get this is to call "``F->viewCFG()``" or
+"``F->viewCFGOnly()``" (where F is a "``Function*``") either by
+inserting actual calls into the code and recompiling or by calling these
+in the debugger. LLVM has many nice features for visualizing various
+graphs.
+
+Getting back to the generated code, it is fairly simple: the entry block
+evaluates the conditional expression ("x" in our case here) and compares
+the result to 0.0 with the "``fcmp one``" instruction ('one' is "Ordered
+and Not Equal"). Based on the result of this expression, the code jumps
+to either the "then" or "else" blocks, which contain the expressions for
+the true/false cases.
+
+Once the then/else blocks are finished executing, they both branch back
+to the 'ifcont' block to execute the code that happens after the
+if/then/else. In this case the only thing left to do is to return to the
+caller of the function. The question then becomes: how does the code
+know which expression to return?
+
+The answer to this question involves an important SSA operation: the
+`Phi
+operation <http://en.wikipedia.org/wiki/Static_single_assignment_form>`_.
+If you're not familiar with SSA, `the wikipedia
+article <http://en.wikipedia.org/wiki/Static_single_assignment_form>`_
+is a good introduction and there are various other introductions to it
+available on your favorite search engine. The short version is that
+"execution" of the Phi operation requires "remembering" which block
+control came from. The Phi operation takes on the value corresponding to
+the input control block. In this case, if control comes in from the
+"then" block, it gets the value of "calltmp". If control comes from the
+"else" block, it gets the value of "calltmp1".
+
+At this point, you are probably starting to think "Oh no! This means my
+simple and elegant front-end will have to start generating SSA form in
+order to use LLVM!". Fortunately, this is not the case, and we strongly
+advise *not* implementing an SSA construction algorithm in your
+front-end unless there is an amazingly good reason to do so. In
+practice, there are two sorts of values that float around in code
+written for your average imperative programming language that might need
+Phi nodes:
+
+#. Code that involves user variables: ``x = 1; x = x + 1;``
+#. Values that are implicit in the structure of your AST, such as the
+ Phi node in this case.
+
+In `Chapter 7 <LangImpl7.html>`_ of this tutorial ("mutable variables"),
+we'll talk about #1 in depth. For now, just believe me that you don't
+need SSA construction to handle this case. For #2, you have the choice
+of using the techniques that we will describe for #1, or you can insert
+Phi nodes directly, if convenient. In this case, it is really really
+easy to generate the Phi node, so we choose to do it directly.
+
+Okay, enough of the motivation and overview, lets generate code!
+
+Code Generation for If/Then/Else
+--------------------------------
+
+In order to generate code for this, we implement the ``Codegen`` method
+for ``IfExprAST``:
+
+.. code-block:: c++
+
+ Value *IfExprAST::Codegen() {
+ Value *CondV = Cond->Codegen();
+ if (CondV == 0) return 0;
+
+ // Convert condition to a bool by comparing equal to 0.0.
+ CondV = Builder.CreateFCmpONE(CondV,
+ ConstantFP::get(getGlobalContext(), APFloat(0.0)),
+ "ifcond");
+
+This code is straightforward and similar to what we saw before. We emit
+the expression for the condition, then compare that value to zero to get
+a truth value as a 1-bit (bool) value.
+
+.. code-block:: c++
+
+ Function *TheFunction = Builder.GetInsertBlock()->getParent();
+
+ // Create blocks for the then and else cases. Insert the 'then' block at the
+ // end of the function.
+ BasicBlock *ThenBB = BasicBlock::Create(getGlobalContext(), "then", TheFunction);
+ BasicBlock *ElseBB = BasicBlock::Create(getGlobalContext(), "else");
+ BasicBlock *MergeBB = BasicBlock::Create(getGlobalContext(), "ifcont");
+
+ Builder.CreateCondBr(CondV, ThenBB, ElseBB);
+
+This code creates the basic blocks that are related to the if/then/else
+statement, and correspond directly to the blocks in the example above.
+The first line gets the current Function object that is being built. It
+gets this by asking the builder for the current BasicBlock, and asking
+that block for its "parent" (the function it is currently embedded
+into).
+
+Once it has that, it creates three blocks. Note that it passes
+"TheFunction" into the constructor for the "then" block. This causes the
+constructor to automatically insert the new block into the end of the
+specified function. The other two blocks are created, but aren't yet
+inserted into the function.
+
+Once the blocks are created, we can emit the conditional branch that
+chooses between them. Note that creating new blocks does not implicitly
+affect the IRBuilder, so it is still inserting into the block that the
+condition went into. Also note that it is creating a branch to the
+"then" block and the "else" block, even though the "else" block isn't
+inserted into the function yet. This is all ok: it is the standard way
+that LLVM supports forward references.
+
+.. code-block:: c++
+
+ // Emit then value.
+ Builder.SetInsertPoint(ThenBB);
+
+ Value *ThenV = Then->Codegen();
+ if (ThenV == 0) return 0;
+
+ Builder.CreateBr(MergeBB);
+ // Codegen of 'Then' can change the current block, update ThenBB for the PHI.
+ ThenBB = Builder.GetInsertBlock();
+
+After the conditional branch is inserted, we move the builder to start
+inserting into the "then" block. Strictly speaking, this call moves the
+insertion point to be at the end of the specified block. However, since
+the "then" block is empty, it also starts out by inserting at the
+beginning of the block. :)
+
+Once the insertion point is set, we recursively codegen the "then"
+expression from the AST. To finish off the "then" block, we create an
+unconditional branch to the merge block. One interesting (and very
+important) aspect of the LLVM IR is that it `requires all basic blocks
+to be "terminated" <../LangRef.html#functionstructure>`_ with a `control
+flow instruction <../LangRef.html#terminators>`_ such as return or
+branch. This means that all control flow, *including fall throughs* must
+be made explicit in the LLVM IR. If you violate this rule, the verifier
+will emit an error.
+
+The final line here is quite subtle, but is very important. The basic
+issue is that when we create the Phi node in the merge block, we need to
+set up the block/value pairs that indicate how the Phi will work.
+Importantly, the Phi node expects to have an entry for each predecessor
+of the block in the CFG. Why then, are we getting the current block when
+we just set it to ThenBB 5 lines above? The problem is that the "Then"
+expression may actually itself change the block that the Builder is
+emitting into if, for example, it contains a nested "if/then/else"
+expression. Because calling Codegen recursively could arbitrarily change
+the notion of the current block, we are required to get an up-to-date
+value for code that will set up the Phi node.
+
+.. code-block:: c++
+
+ // Emit else block.
+ TheFunction->getBasicBlockList().push_back(ElseBB);
+ Builder.SetInsertPoint(ElseBB);
+
+ Value *ElseV = Else->Codegen();
+ if (ElseV == 0) return 0;
+
+ Builder.CreateBr(MergeBB);
+ // Codegen of 'Else' can change the current block, update ElseBB for the PHI.
+ ElseBB = Builder.GetInsertBlock();
+
+Code generation for the 'else' block is basically identical to codegen
+for the 'then' block. The only significant difference is the first line,
+which adds the 'else' block to the function. Recall previously that the
+'else' block was created, but not added to the function. Now that the
+'then' and 'else' blocks are emitted, we can finish up with the merge
+code:
+
+.. code-block:: c++
+
+ // Emit merge block.
+ TheFunction->getBasicBlockList().push_back(MergeBB);
+ Builder.SetInsertPoint(MergeBB);
+ PHINode *PN = Builder.CreatePHI(Type::getDoubleTy(getGlobalContext()), 2,
+ "iftmp");
+
+ PN->addIncoming(ThenV, ThenBB);
+ PN->addIncoming(ElseV, ElseBB);
+ return PN;
+ }
+
+The first two lines here are now familiar: the first adds the "merge"
+block to the Function object (it was previously floating, like the else
+block above). The second block changes the insertion point so that newly
+created code will go into the "merge" block. Once that is done, we need
+to create the PHI node and set up the block/value pairs for the PHI.
+
+Finally, the CodeGen function returns the phi node as the value computed
+by the if/then/else expression. In our example above, this returned
+value will feed into the code for the top-level function, which will
+create the return instruction.
+
+Overall, we now have the ability to execute conditional code in
+Kaleidoscope. With this extension, Kaleidoscope is a fairly complete
+language that can calculate a wide variety of numeric functions. Next up
+we'll add another useful expression that is familiar from non-functional
+languages...
+
+'for' Loop Expression
+=====================
+
+Now that we know how to add basic control flow constructs to the
+language, we have the tools to add more powerful things. Lets add
+something more aggressive, a 'for' expression:
+
+::
+
+ extern putchard(char)
+ def printstar(n)
+ for i = 1, i < n, 1.0 in
+ putchard(42); # ascii 42 = '*'
+
+ # print 100 '*' characters
+ printstar(100);
+
+This expression defines a new variable ("i" in this case) which iterates
+from a starting value, while the condition ("i < n" in this case) is
+true, incrementing by an optional step value ("1.0" in this case). If
+the step value is omitted, it defaults to 1.0. While the loop is true,
+it executes its body expression. Because we don't have anything better
+to return, we'll just define the loop as always returning 0.0. In the
+future when we have mutable variables, it will get more useful.
+
+As before, lets talk about the changes that we need to Kaleidoscope to
+support this.
+
+Lexer Extensions for the 'for' Loop
+-----------------------------------
+
+The lexer extensions are the same sort of thing as for if/then/else:
+
+.. code-block:: c++
+
+ ... in enum Token ...
+ // control
+ tok_if = -6, tok_then = -7, tok_else = -8,
+ tok_for = -9, tok_in = -10
+
+ ... in gettok ...
+ if (IdentifierStr == "def") return tok_def;
+ if (IdentifierStr == "extern") return tok_extern;
+ if (IdentifierStr == "if") return tok_if;
+ if (IdentifierStr == "then") return tok_then;
+ if (IdentifierStr == "else") return tok_else;
+ if (IdentifierStr == "for") return tok_for;
+ if (IdentifierStr == "in") return tok_in;
+ return tok_identifier;
+
+AST Extensions for the 'for' Loop
+---------------------------------
+
+The AST node is just as simple. It basically boils down to capturing the
+variable name and the constituent expressions in the node.
+
+.. code-block:: c++
+
+ /// ForExprAST - Expression class for for/in.
+ class ForExprAST : public ExprAST {
+ std::string VarName;
+ ExprAST *Start, *End, *Step, *Body;
+ public:
+ ForExprAST(const std::string &varname, ExprAST *start, ExprAST *end,
+ ExprAST *step, ExprAST *body)
+ : VarName(varname), Start(start), End(end), Step(step), Body(body) {}
+ virtual Value *Codegen();
+ };
+
+Parser Extensions for the 'for' Loop
+------------------------------------
+
+The parser code is also fairly standard. The only interesting thing here
+is handling of the optional step value. The parser code handles it by
+checking to see if the second comma is present. If not, it sets the step
+value to null in the AST node:
+
+.. code-block:: c++
+
+ /// forexpr ::= 'for' identifier '=' expr ',' expr (',' expr)? 'in' expression
+ static ExprAST *ParseForExpr() {
+ getNextToken(); // eat the for.
+
+ if (CurTok != tok_identifier)
+ return Error("expected identifier after for");
+
+ std::string IdName = IdentifierStr;
+ getNextToken(); // eat identifier.
+
+ if (CurTok != '=')
+ return Error("expected '=' after for");
+ getNextToken(); // eat '='.
+
+
+ ExprAST *Start = ParseExpression();
+ if (Start == 0) return 0;
+ if (CurTok != ',')
+ return Error("expected ',' after for start value");
+ getNextToken();
+
+ ExprAST *End = ParseExpression();
+ if (End == 0) return 0;
+
+ // The step value is optional.
+ ExprAST *Step = 0;
+ if (CurTok == ',') {
+ getNextToken();
+ Step = ParseExpression();
+ if (Step == 0) return 0;
+ }
+
+ if (CurTok != tok_in)
+ return Error("expected 'in' after for");
+ getNextToken(); // eat 'in'.
+
+ ExprAST *Body = ParseExpression();
+ if (Body == 0) return 0;
+
+ return new ForExprAST(IdName, Start, End, Step, Body);
+ }
+
+LLVM IR for the 'for' Loop
+--------------------------
+
+Now we get to the good part: the LLVM IR we want to generate for this
+thing. With the simple example above, we get this LLVM IR (note that
+this dump is generated with optimizations disabled for clarity):
+
+.. code-block:: llvm
+
+ declare double @putchard(double)
+
+ define double @printstar(double %n) {
+ entry:
+ ; initial value = 1.0 (inlined into phi)
+ br label %loop
+
+ loop: ; preds = %loop, %entry
+ %i = phi double [ 1.000000e+00, %entry ], [ %nextvar, %loop ]
+ ; body
+ %calltmp = call double @putchard(double 4.200000e+01)
+ ; increment
+ %nextvar = fadd double %i, 1.000000e+00
+
+ ; termination test
+ %cmptmp = fcmp ult double %i, %n
+ %booltmp = uitofp i1 %cmptmp to double
+ %loopcond = fcmp one double %booltmp, 0.000000e+00
+ br i1 %loopcond, label %loop, label %afterloop
+
+ afterloop: ; preds = %loop
+ ; loop always returns 0.0
+ ret double 0.000000e+00
+ }
+
+This loop contains all the same constructs we saw before: a phi node,
+several expressions, and some basic blocks. Lets see how this fits
+together.
+
+Code Generation for the 'for' Loop
+----------------------------------
+
+The first part of Codegen is very simple: we just output the start
+expression for the loop value:
+
+.. code-block:: c++
+
+ Value *ForExprAST::Codegen() {
+ // Emit the start code first, without 'variable' in scope.
+ Value *StartVal = Start->Codegen();
+ if (StartVal == 0) return 0;
+
+With this out of the way, the next step is to set up the LLVM basic
+block for the start of the loop body. In the case above, the whole loop
+body is one block, but remember that the body code itself could consist
+of multiple blocks (e.g. if it contains an if/then/else or a for/in
+expression).
+
+.. code-block:: c++
+
+ // Make the new basic block for the loop header, inserting after current
+ // block.
+ Function *TheFunction = Builder.GetInsertBlock()->getParent();
+ BasicBlock *PreheaderBB = Builder.GetInsertBlock();
+ BasicBlock *LoopBB = BasicBlock::Create(getGlobalContext(), "loop", TheFunction);
+
+ // Insert an explicit fall through from the current block to the LoopBB.
+ Builder.CreateBr(LoopBB);
+
+This code is similar to what we saw for if/then/else. Because we will
+need it to create the Phi node, we remember the block that falls through
+into the loop. Once we have that, we create the actual block that starts
+the loop and create an unconditional branch for the fall-through between
+the two blocks.
+
+.. code-block:: c++
+
+ // Start insertion in LoopBB.
+ Builder.SetInsertPoint(LoopBB);
+
+ // Start the PHI node with an entry for Start.
+ PHINode *Variable = Builder.CreatePHI(Type::getDoubleTy(getGlobalContext()), 2, VarName.c_str());
+ Variable->addIncoming(StartVal, PreheaderBB);
+
+Now that the "preheader" for the loop is set up, we switch to emitting
+code for the loop body. To begin with, we move the insertion point and
+create the PHI node for the loop induction variable. Since we already
+know the incoming value for the starting value, we add it to the Phi
+node. Note that the Phi will eventually get a second value for the
+backedge, but we can't set it up yet (because it doesn't exist!).
+
+.. code-block:: c++
+
+ // Within the loop, the variable is defined equal to the PHI node. If it
+ // shadows an existing variable, we have to restore it, so save it now.
+ Value *OldVal = NamedValues[VarName];
+ NamedValues[VarName] = Variable;
+
+ // Emit the body of the loop. This, like any other expr, can change the
+ // current BB. Note that we ignore the value computed by the body, but don't
+ // allow an error.
+ if (Body->Codegen() == 0)
+ return 0;
+
+Now the code starts to get more interesting. Our 'for' loop introduces a
+new variable to the symbol table. This means that our symbol table can
+now contain either function arguments or loop variables. To handle this,
+before we codegen the body of the loop, we add the loop variable as the
+current value for its name. Note that it is possible that there is a
+variable of the same name in the outer scope. It would be easy to make
+this an error (emit an error and return null if there is already an
+entry for VarName) but we choose to allow shadowing of variables. In
+order to handle this correctly, we remember the Value that we are
+potentially shadowing in ``OldVal`` (which will be null if there is no
+shadowed variable).
+
+Once the loop variable is set into the symbol table, the code
+recursively codegen's the body. This allows the body to use the loop
+variable: any references to it will naturally find it in the symbol
+table.
+
+.. code-block:: c++
+
+ // Emit the step value.
+ Value *StepVal;
+ if (Step) {
+ StepVal = Step->Codegen();
+ if (StepVal == 0) return 0;
+ } else {
+ // If not specified, use 1.0.
+ StepVal = ConstantFP::get(getGlobalContext(), APFloat(1.0));
+ }
+
+ Value *NextVar = Builder.CreateFAdd(Variable, StepVal, "nextvar");
+
+Now that the body is emitted, we compute the next value of the iteration
+variable by adding the step value, or 1.0 if it isn't present.
+'``NextVar``' will be the value of the loop variable on the next
+iteration of the loop.
+
+.. code-block:: c++
+
+ // Compute the end condition.
+ Value *EndCond = End->Codegen();
+ if (EndCond == 0) return EndCond;
+
+ // Convert condition to a bool by comparing equal to 0.0.
+ EndCond = Builder.CreateFCmpONE(EndCond,
+ ConstantFP::get(getGlobalContext(), APFloat(0.0)),
+ "loopcond");
+
+Finally, we evaluate the exit value of the loop, to determine whether
+the loop should exit. This mirrors the condition evaluation for the
+if/then/else statement.
+
+.. code-block:: c++
+
+ // Create the "after loop" block and insert it.
+ BasicBlock *LoopEndBB = Builder.GetInsertBlock();
+ BasicBlock *AfterBB = BasicBlock::Create(getGlobalContext(), "afterloop", TheFunction);
+
+ // Insert the conditional branch into the end of LoopEndBB.
+ Builder.CreateCondBr(EndCond, LoopBB, AfterBB);
+
+ // Any new code will be inserted in AfterBB.
+ Builder.SetInsertPoint(AfterBB);
+
+With the code for the body of the loop complete, we just need to finish
+up the control flow for it. This code remembers the end block (for the
+phi node), then creates the block for the loop exit ("afterloop"). Based
+on the value of the exit condition, it creates a conditional branch that
+chooses between executing the loop again and exiting the loop. Any
+future code is emitted in the "afterloop" block, so it sets the
+insertion position to it.
+
+.. code-block:: c++
+
+ // Add a new entry to the PHI node for the backedge.
+ Variable->addIncoming(NextVar, LoopEndBB);
+
+ // Restore the unshadowed variable.
+ if (OldVal)
+ NamedValues[VarName] = OldVal;
+ else
+ NamedValues.erase(VarName);
+
+ // for expr always returns 0.0.
+ return Constant::getNullValue(Type::getDoubleTy(getGlobalContext()));
+ }
+
+The final code handles various cleanups: now that we have the "NextVar"
+value, we can add the incoming value to the loop PHI node. After that,
+we remove the loop variable from the symbol table, so that it isn't in
+scope after the for loop. Finally, code generation of the for loop
+always returns 0.0, so that is what we return from
+``ForExprAST::Codegen``.
+
+With this, we conclude the "adding control flow to Kaleidoscope" chapter
+of the tutorial. In this chapter we added two control flow constructs,
+and used them to motivate a couple of aspects of the LLVM IR that are
+important for front-end implementors to know. In the next chapter of our
+saga, we will get a bit crazier and add `user-defined
+operators <LangImpl6.html>`_ to our poor innocent language.
+
+Full Code Listing
+=================
+
+Here is the complete code listing for our running example, enhanced with
+the if/then/else and for expressions.. To build this example, use:
+
+.. code-block:: bash
+
+ # Compile
+ clang++ -g toy.cpp `llvm-config --cxxflags --ldflags --system-libs --libs core mcjit native` -O3 -o toy
+ # Run
+ ./toy
+
+Here is the code:
+
+.. literalinclude:: ../../examples/Kaleidoscope/Chapter5/toy.cpp
+ :language: c++
+
+`Next: Extending the language: user-defined operators <LangImpl6.html>`_
+
Added: www-releases/trunk/3.6.1/docs/_sources/tutorial/LangImpl6.txt
URL: http://llvm.org/viewvc/llvm-project/www-releases/trunk/3.6.1/docs/_sources/tutorial/LangImpl6.txt?rev=238135&view=auto
==============================================================================
--- www-releases/trunk/3.6.1/docs/_sources/tutorial/LangImpl6.txt (added)
+++ www-releases/trunk/3.6.1/docs/_sources/tutorial/LangImpl6.txt Mon May 25 08:53:02 2015
@@ -0,0 +1,750 @@
+============================================================
+Kaleidoscope: Extending the Language: User-defined Operators
+============================================================
+
+.. contents::
+ :local:
+
+Chapter 6 Introduction
+======================
+
+Welcome to Chapter 6 of the "`Implementing a language with
+LLVM <index.html>`_" tutorial. At this point in our tutorial, we now
+have a fully functional language that is fairly minimal, but also
+useful. There is still one big problem with it, however. Our language
+doesn't have many useful operators (like division, logical negation, or
+even any comparisons besides less-than).
+
+This chapter of the tutorial takes a wild digression into adding
+user-defined operators to the simple and beautiful Kaleidoscope
+language. This digression now gives us a simple and ugly language in
+some ways, but also a powerful one at the same time. One of the great
+things about creating your own language is that you get to decide what
+is good or bad. In this tutorial we'll assume that it is okay to use
+this as a way to show some interesting parsing techniques.
+
+At the end of this tutorial, we'll run through an example Kaleidoscope
+application that `renders the Mandelbrot set <#example>`_. This gives an
+example of what you can build with Kaleidoscope and its feature set.
+
+User-defined Operators: the Idea
+================================
+
+The "operator overloading" that we will add to Kaleidoscope is more
+general than languages like C++. In C++, you are only allowed to
+redefine existing operators: you can't programatically change the
+grammar, introduce new operators, change precedence levels, etc. In this
+chapter, we will add this capability to Kaleidoscope, which will let the
+user round out the set of operators that are supported.
+
+The point of going into user-defined operators in a tutorial like this
+is to show the power and flexibility of using a hand-written parser.
+Thus far, the parser we have been implementing uses recursive descent
+for most parts of the grammar and operator precedence parsing for the
+expressions. See `Chapter 2 <LangImpl2.html>`_ for details. Without
+using operator precedence parsing, it would be very difficult to allow
+the programmer to introduce new operators into the grammar: the grammar
+is dynamically extensible as the JIT runs.
+
+The two specific features we'll add are programmable unary operators
+(right now, Kaleidoscope has no unary operators at all) as well as
+binary operators. An example of this is:
+
+::
+
+ # Logical unary not.
+ def unary!(v)
+ if v then
+ 0
+ else
+ 1;
+
+ # Define > with the same precedence as <.
+ def binary> 10 (LHS RHS)
+ RHS < LHS;
+
+ # Binary "logical or", (note that it does not "short circuit")
+ def binary| 5 (LHS RHS)
+ if LHS then
+ 1
+ else if RHS then
+ 1
+ else
+ 0;
+
+ # Define = with slightly lower precedence than relationals.
+ def binary= 9 (LHS RHS)
+ !(LHS < RHS | LHS > RHS);
+
+Many languages aspire to being able to implement their standard runtime
+library in the language itself. In Kaleidoscope, we can implement
+significant parts of the language in the library!
+
+We will break down implementation of these features into two parts:
+implementing support for user-defined binary operators and adding unary
+operators.
+
+User-defined Binary Operators
+=============================
+
+Adding support for user-defined binary operators is pretty simple with
+our current framework. We'll first add support for the unary/binary
+keywords:
+
+.. code-block:: c++
+
+ enum Token {
+ ...
+ // operators
+ tok_binary = -11, tok_unary = -12
+ };
+ ...
+ static int gettok() {
+ ...
+ if (IdentifierStr == "for") return tok_for;
+ if (IdentifierStr == "in") return tok_in;
+ if (IdentifierStr == "binary") return tok_binary;
+ if (IdentifierStr == "unary") return tok_unary;
+ return tok_identifier;
+
+This just adds lexer support for the unary and binary keywords, like we
+did in `previous chapters <LangImpl5.html#iflexer>`_. One nice thing
+about our current AST, is that we represent binary operators with full
+generalisation by using their ASCII code as the opcode. For our extended
+operators, we'll use this same representation, so we don't need any new
+AST or parser support.
+
+On the other hand, we have to be able to represent the definitions of
+these new operators, in the "def binary\| 5" part of the function
+definition. In our grammar so far, the "name" for the function
+definition is parsed as the "prototype" production and into the
+``PrototypeAST`` AST node. To represent our new user-defined operators
+as prototypes, we have to extend the ``PrototypeAST`` AST node like
+this:
+
+.. code-block:: c++
+
+ /// PrototypeAST - This class represents the "prototype" for a function,
+ /// which captures its argument names as well as if it is an operator.
+ class PrototypeAST {
+ std::string Name;
+ std::vector<std::string> Args;
+ bool isOperator;
+ unsigned Precedence; // Precedence if a binary op.
+ public:
+ PrototypeAST(const std::string &name, const std::vector<std::string> &args,
+ bool isoperator = false, unsigned prec = 0)
+ : Name(name), Args(args), isOperator(isoperator), Precedence(prec) {}
+
+ bool isUnaryOp() const { return isOperator && Args.size() == 1; }
+ bool isBinaryOp() const { return isOperator && Args.size() == 2; }
+
+ char getOperatorName() const {
+ assert(isUnaryOp() || isBinaryOp());
+ return Name[Name.size()-1];
+ }
+
+ unsigned getBinaryPrecedence() const { return Precedence; }
+
+ Function *Codegen();
+ };
+
+Basically, in addition to knowing a name for the prototype, we now keep
+track of whether it was an operator, and if it was, what precedence
+level the operator is at. The precedence is only used for binary
+operators (as you'll see below, it just doesn't apply for unary
+operators). Now that we have a way to represent the prototype for a
+user-defined operator, we need to parse it:
+
+.. code-block:: c++
+
+ /// prototype
+ /// ::= id '(' id* ')'
+ /// ::= binary LETTER number? (id, id)
+ static PrototypeAST *ParsePrototype() {
+ std::string FnName;
+
+ unsigned Kind = 0; // 0 = identifier, 1 = unary, 2 = binary.
+ unsigned BinaryPrecedence = 30;
+
+ switch (CurTok) {
+ default:
+ return ErrorP("Expected function name in prototype");
+ case tok_identifier:
+ FnName = IdentifierStr;
+ Kind = 0;
+ getNextToken();
+ break;
+ case tok_binary:
+ getNextToken();
+ if (!isascii(CurTok))
+ return ErrorP("Expected binary operator");
+ FnName = "binary";
+ FnName += (char)CurTok;
+ Kind = 2;
+ getNextToken();
+
+ // Read the precedence if present.
+ if (CurTok == tok_number) {
+ if (NumVal < 1 || NumVal > 100)
+ return ErrorP("Invalid precedecnce: must be 1..100");
+ BinaryPrecedence = (unsigned)NumVal;
+ getNextToken();
+ }
+ break;
+ }
+
+ if (CurTok != '(')
+ return ErrorP("Expected '(' in prototype");
+
+ std::vector<std::string> ArgNames;
+ while (getNextToken() == tok_identifier)
+ ArgNames.push_back(IdentifierStr);
+ if (CurTok != ')')
+ return ErrorP("Expected ')' in prototype");
+
+ // success.
+ getNextToken(); // eat ')'.
+
+ // Verify right number of names for operator.
+ if (Kind && ArgNames.size() != Kind)
+ return ErrorP("Invalid number of operands for operator");
+
+ return new PrototypeAST(FnName, ArgNames, Kind != 0, BinaryPrecedence);
+ }
+
+This is all fairly straightforward parsing code, and we have already
+seen a lot of similar code in the past. One interesting part about the
+code above is the couple lines that set up ``FnName`` for binary
+operators. This builds names like "binary@" for a newly defined "@"
+operator. This then takes advantage of the fact that symbol names in the
+LLVM symbol table are allowed to have any character in them, including
+embedded nul characters.
+
+The next interesting thing to add, is codegen support for these binary
+operators. Given our current structure, this is a simple addition of a
+default case for our existing binary operator node:
+
+.. code-block:: c++
+
+ Value *BinaryExprAST::Codegen() {
+ Value *L = LHS->Codegen();
+ Value *R = RHS->Codegen();
+ if (L == 0 || R == 0) return 0;
+
+ switch (Op) {
+ case '+': return Builder.CreateFAdd(L, R, "addtmp");
+ case '-': return Builder.CreateFSub(L, R, "subtmp");
+ case '*': return Builder.CreateFMul(L, R, "multmp");
+ case '<':
+ L = Builder.CreateFCmpULT(L, R, "cmptmp");
+ // Convert bool 0/1 to double 0.0 or 1.0
+ return Builder.CreateUIToFP(L, Type::getDoubleTy(getGlobalContext()),
+ "booltmp");
+ default: break;
+ }
+
+ // If it wasn't a builtin binary operator, it must be a user defined one. Emit
+ // a call to it.
+ Function *F = TheModule->getFunction(std::string("binary")+Op);
+ assert(F && "binary operator not found!");
+
+ Value *Ops[2] = { L, R };
+ return Builder.CreateCall(F, Ops, "binop");
+ }
+
+As you can see above, the new code is actually really simple. It just
+does a lookup for the appropriate operator in the symbol table and
+generates a function call to it. Since user-defined operators are just
+built as normal functions (because the "prototype" boils down to a
+function with the right name) everything falls into place.
+
+The final piece of code we are missing, is a bit of top-level magic:
+
+.. code-block:: c++
+
+ Function *FunctionAST::Codegen() {
+ NamedValues.clear();
+
+ Function *TheFunction = Proto->Codegen();
+ if (TheFunction == 0)
+ return 0;
+
+ // If this is an operator, install it.
+ if (Proto->isBinaryOp())
+ BinopPrecedence[Proto->getOperatorName()] = Proto->getBinaryPrecedence();
+
+ // Create a new basic block to start insertion into.
+ BasicBlock *BB = BasicBlock::Create(getGlobalContext(), "entry", TheFunction);
+ Builder.SetInsertPoint(BB);
+
+ if (Value *RetVal = Body->Codegen()) {
+ ...
+
+Basically, before codegening a function, if it is a user-defined
+operator, we register it in the precedence table. This allows the binary
+operator parsing logic we already have in place to handle it. Since we
+are working on a fully-general operator precedence parser, this is all
+we need to do to "extend the grammar".
+
+Now we have useful user-defined binary operators. This builds a lot on
+the previous framework we built for other operators. Adding unary
+operators is a bit more challenging, because we don't have any framework
+for it yet - lets see what it takes.
+
+User-defined Unary Operators
+============================
+
+Since we don't currently support unary operators in the Kaleidoscope
+language, we'll need to add everything to support them. Above, we added
+simple support for the 'unary' keyword to the lexer. In addition to
+that, we need an AST node:
+
+.. code-block:: c++
+
+ /// UnaryExprAST - Expression class for a unary operator.
+ class UnaryExprAST : public ExprAST {
+ char Opcode;
+ ExprAST *Operand;
+ public:
+ UnaryExprAST(char opcode, ExprAST *operand)
+ : Opcode(opcode), Operand(operand) {}
+ virtual Value *Codegen();
+ };
+
+This AST node is very simple and obvious by now. It directly mirrors the
+binary operator AST node, except that it only has one child. With this,
+we need to add the parsing logic. Parsing a unary operator is pretty
+simple: we'll add a new function to do it:
+
+.. code-block:: c++
+
+ /// unary
+ /// ::= primary
+ /// ::= '!' unary
+ static ExprAST *ParseUnary() {
+ // If the current token is not an operator, it must be a primary expr.
+ if (!isascii(CurTok) || CurTok == '(' || CurTok == ',')
+ return ParsePrimary();
+
+ // If this is a unary operator, read it.
+ int Opc = CurTok;
+ getNextToken();
+ if (ExprAST *Operand = ParseUnary())
+ return new UnaryExprAST(Opc, Operand);
+ return 0;
+ }
+
+The grammar we add is pretty straightforward here. If we see a unary
+operator when parsing a primary operator, we eat the operator as a
+prefix and parse the remaining piece as another unary operator. This
+allows us to handle multiple unary operators (e.g. "!!x"). Note that
+unary operators can't have ambiguous parses like binary operators can,
+so there is no need for precedence information.
+
+The problem with this function, is that we need to call ParseUnary from
+somewhere. To do this, we change previous callers of ParsePrimary to
+call ParseUnary instead:
+
+.. code-block:: c++
+
+ /// binoprhs
+ /// ::= ('+' unary)*
+ static ExprAST *ParseBinOpRHS(int ExprPrec, ExprAST *LHS) {
+ ...
+ // Parse the unary expression after the binary operator.
+ ExprAST *RHS = ParseUnary();
+ if (!RHS) return 0;
+ ...
+ }
+ /// expression
+ /// ::= unary binoprhs
+ ///
+ static ExprAST *ParseExpression() {
+ ExprAST *LHS = ParseUnary();
+ if (!LHS) return 0;
+
+ return ParseBinOpRHS(0, LHS);
+ }
+
+With these two simple changes, we are now able to parse unary operators
+and build the AST for them. Next up, we need to add parser support for
+prototypes, to parse the unary operator prototype. We extend the binary
+operator code above with:
+
+.. code-block:: c++
+
+ /// prototype
+ /// ::= id '(' id* ')'
+ /// ::= binary LETTER number? (id, id)
+ /// ::= unary LETTER (id)
+ static PrototypeAST *ParsePrototype() {
+ std::string FnName;
+
+ unsigned Kind = 0; // 0 = identifier, 1 = unary, 2 = binary.
+ unsigned BinaryPrecedence = 30;
+
+ switch (CurTok) {
+ default:
+ return ErrorP("Expected function name in prototype");
+ case tok_identifier:
+ FnName = IdentifierStr;
+ Kind = 0;
+ getNextToken();
+ break;
+ case tok_unary:
+ getNextToken();
+ if (!isascii(CurTok))
+ return ErrorP("Expected unary operator");
+ FnName = "unary";
+ FnName += (char)CurTok;
+ Kind = 1;
+ getNextToken();
+ break;
+ case tok_binary:
+ ...
+
+As with binary operators, we name unary operators with a name that
+includes the operator character. This assists us at code generation
+time. Speaking of, the final piece we need to add is codegen support for
+unary operators. It looks like this:
+
+.. code-block:: c++
+
+ Value *UnaryExprAST::Codegen() {
+ Value *OperandV = Operand->Codegen();
+ if (OperandV == 0) return 0;
+
+ Function *F = TheModule->getFunction(std::string("unary")+Opcode);
+ if (F == 0)
+ return ErrorV("Unknown unary operator");
+
+ return Builder.CreateCall(F, OperandV, "unop");
+ }
+
+This code is similar to, but simpler than, the code for binary
+operators. It is simpler primarily because it doesn't need to handle any
+predefined operators.
+
+Kicking the Tires
+=================
+
+It is somewhat hard to believe, but with a few simple extensions we've
+covered in the last chapters, we have grown a real-ish language. With
+this, we can do a lot of interesting things, including I/O, math, and a
+bunch of other things. For example, we can now add a nice sequencing
+operator (printd is defined to print out the specified value and a
+newline):
+
+::
+
+ ready> extern printd(x);
+ Read extern:
+ declare double @printd(double)
+
+ ready> def binary : 1 (x y) 0; # Low-precedence operator that ignores operands.
+ ..
+ ready> printd(123) : printd(456) : printd(789);
+ 123.000000
+ 456.000000
+ 789.000000
+ Evaluated to 0.000000
+
+We can also define a bunch of other "primitive" operations, such as:
+
+::
+
+ # Logical unary not.
+ def unary!(v)
+ if v then
+ 0
+ else
+ 1;
+
+ # Unary negate.
+ def unary-(v)
+ 0-v;
+
+ # Define > with the same precedence as <.
+ def binary> 10 (LHS RHS)
+ RHS < LHS;
+
+ # Binary logical or, which does not short circuit.
+ def binary| 5 (LHS RHS)
+ if LHS then
+ 1
+ else if RHS then
+ 1
+ else
+ 0;
+
+ # Binary logical and, which does not short circuit.
+ def binary& 6 (LHS RHS)
+ if !LHS then
+ 0
+ else
+ !!RHS;
+
+ # Define = with slightly lower precedence than relationals.
+ def binary = 9 (LHS RHS)
+ !(LHS < RHS | LHS > RHS);
+
+ # Define ':' for sequencing: as a low-precedence operator that ignores operands
+ # and just returns the RHS.
+ def binary : 1 (x y) y;
+
+Given the previous if/then/else support, we can also define interesting
+functions for I/O. For example, the following prints out a character
+whose "density" reflects the value passed in: the lower the value, the
+denser the character:
+
+::
+
+ ready>
+
+ extern putchard(char)
+ def printdensity(d)
+ if d > 8 then
+ putchard(32) # ' '
+ else if d > 4 then
+ putchard(46) # '.'
+ else if d > 2 then
+ putchard(43) # '+'
+ else
+ putchard(42); # '*'
+ ...
+ ready> printdensity(1): printdensity(2): printdensity(3):
+ printdensity(4): printdensity(5): printdensity(9):
+ putchard(10);
+ **++.
+ Evaluated to 0.000000
+
+Based on these simple primitive operations, we can start to define more
+interesting things. For example, here's a little function that solves
+for the number of iterations it takes a function in the complex plane to
+converge:
+
+::
+
+ # Determine whether the specific location diverges.
+ # Solve for z = z^2 + c in the complex plane.
+ def mandleconverger(real imag iters creal cimag)
+ if iters > 255 | (real*real + imag*imag > 4) then
+ iters
+ else
+ mandleconverger(real*real - imag*imag + creal,
+ 2*real*imag + cimag,
+ iters+1, creal, cimag);
+
+ # Return the number of iterations required for the iteration to escape
+ def mandleconverge(real imag)
+ mandleconverger(real, imag, 0, real, imag);
+
+This "``z = z2 + c``" function is a beautiful little creature that is
+the basis for computation of the `Mandelbrot
+Set <http://en.wikipedia.org/wiki/Mandelbrot_set>`_. Our
+``mandelconverge`` function returns the number of iterations that it
+takes for a complex orbit to escape, saturating to 255. This is not a
+very useful function by itself, but if you plot its value over a
+two-dimensional plane, you can see the Mandelbrot set. Given that we are
+limited to using putchard here, our amazing graphical output is limited,
+but we can whip together something using the density plotter above:
+
+::
+
+ # Compute and plot the mandlebrot set with the specified 2 dimensional range
+ # info.
+ def mandelhelp(xmin xmax xstep ymin ymax ystep)
+ for y = ymin, y < ymax, ystep in (
+ (for x = xmin, x < xmax, xstep in
+ printdensity(mandleconverge(x,y)))
+ : putchard(10)
+ )
+
+ # mandel - This is a convenient helper function for plotting the mandelbrot set
+ # from the specified position with the specified Magnification.
+ def mandel(realstart imagstart realmag imagmag)
+ mandelhelp(realstart, realstart+realmag*78, realmag,
+ imagstart, imagstart+imagmag*40, imagmag);
+
+Given this, we can try plotting out the mandlebrot set! Lets try it out:
+
+::
+
+ ready> mandel(-2.3, -1.3, 0.05, 0.07);
+ *******************************+++++++++++*************************************
+ *************************+++++++++++++++++++++++*******************************
+ **********************+++++++++++++++++++++++++++++****************************
+ *******************+++++++++++++++++++++.. ...++++++++*************************
+ *****************++++++++++++++++++++++.... ...+++++++++***********************
+ ***************+++++++++++++++++++++++..... ...+++++++++*********************
+ **************+++++++++++++++++++++++.... ....+++++++++********************
+ *************++++++++++++++++++++++...... .....++++++++*******************
+ ************+++++++++++++++++++++....... .......+++++++******************
+ ***********+++++++++++++++++++.... ... .+++++++*****************
+ **********+++++++++++++++++....... .+++++++****************
+ *********++++++++++++++........... ...+++++++***************
+ ********++++++++++++............ ...++++++++**************
+ ********++++++++++... .......... .++++++++**************
+ *******+++++++++..... .+++++++++*************
+ *******++++++++...... ..+++++++++*************
+ *******++++++....... ..+++++++++*************
+ *******+++++...... ..+++++++++*************
+ *******.... .... ...+++++++++*************
+ *******.... . ...+++++++++*************
+ *******+++++...... ...+++++++++*************
+ *******++++++....... ..+++++++++*************
+ *******++++++++...... .+++++++++*************
+ *******+++++++++..... ..+++++++++*************
+ ********++++++++++... .......... .++++++++**************
+ ********++++++++++++............ ...++++++++**************
+ *********++++++++++++++.......... ...+++++++***************
+ **********++++++++++++++++........ .+++++++****************
+ **********++++++++++++++++++++.... ... ..+++++++****************
+ ***********++++++++++++++++++++++....... .......++++++++*****************
+ ************+++++++++++++++++++++++...... ......++++++++******************
+ **************+++++++++++++++++++++++.... ....++++++++********************
+ ***************+++++++++++++++++++++++..... ...+++++++++*********************
+ *****************++++++++++++++++++++++.... ...++++++++***********************
+ *******************+++++++++++++++++++++......++++++++*************************
+ *********************++++++++++++++++++++++.++++++++***************************
+ *************************+++++++++++++++++++++++*******************************
+ ******************************+++++++++++++************************************
+ *******************************************************************************
+ *******************************************************************************
+ *******************************************************************************
+ Evaluated to 0.000000
+ ready> mandel(-2, -1, 0.02, 0.04);
+ **************************+++++++++++++++++++++++++++++++++++++++++++++++++++++
+ ***********************++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ *********************+++++++++++++++++++++++++++++++++++++++++++++++++++++++++.
+ *******************+++++++++++++++++++++++++++++++++++++++++++++++++++++++++...
+ *****************+++++++++++++++++++++++++++++++++++++++++++++++++++++++++.....
+ ***************++++++++++++++++++++++++++++++++++++++++++++++++++++++++........
+ **************++++++++++++++++++++++++++++++++++++++++++++++++++++++...........
+ ************+++++++++++++++++++++++++++++++++++++++++++++++++++++..............
+ ***********++++++++++++++++++++++++++++++++++++++++++++++++++........ .
+ **********++++++++++++++++++++++++++++++++++++++++++++++.............
+ ********+++++++++++++++++++++++++++++++++++++++++++..................
+ *******+++++++++++++++++++++++++++++++++++++++.......................
+ ******+++++++++++++++++++++++++++++++++++...........................
+ *****++++++++++++++++++++++++++++++++............................
+ *****++++++++++++++++++++++++++++...............................
+ ****++++++++++++++++++++++++++...... .........................
+ ***++++++++++++++++++++++++......... ...... ...........
+ ***++++++++++++++++++++++............
+ **+++++++++++++++++++++..............
+ **+++++++++++++++++++................
+ *++++++++++++++++++.................
+ *++++++++++++++++............ ...
+ *++++++++++++++..............
+ *+++....++++................
+ *.......... ...........
+ *
+ *.......... ...........
+ *+++....++++................
+ *++++++++++++++..............
+ *++++++++++++++++............ ...
+ *++++++++++++++++++.................
+ **+++++++++++++++++++................
+ **+++++++++++++++++++++..............
+ ***++++++++++++++++++++++............
+ ***++++++++++++++++++++++++......... ...... ...........
+ ****++++++++++++++++++++++++++...... .........................
+ *****++++++++++++++++++++++++++++...............................
+ *****++++++++++++++++++++++++++++++++............................
+ ******+++++++++++++++++++++++++++++++++++...........................
+ *******+++++++++++++++++++++++++++++++++++++++.......................
+ ********+++++++++++++++++++++++++++++++++++++++++++..................
+ Evaluated to 0.000000
+ ready> mandel(-0.9, -1.4, 0.02, 0.03);
+ *******************************************************************************
+ *******************************************************************************
+ *******************************************************************************
+ **********+++++++++++++++++++++************************************************
+ *+++++++++++++++++++++++++++++++++++++++***************************************
+ +++++++++++++++++++++++++++++++++++++++++++++**********************************
+ ++++++++++++++++++++++++++++++++++++++++++++++++++*****************************
+ ++++++++++++++++++++++++++++++++++++++++++++++++++++++*************************
+ +++++++++++++++++++++++++++++++++++++++++++++++++++++++++**********************
+ +++++++++++++++++++++++++++++++++.........++++++++++++++++++*******************
+ +++++++++++++++++++++++++++++++.... ......+++++++++++++++++++****************
+ +++++++++++++++++++++++++++++....... ........+++++++++++++++++++**************
+ ++++++++++++++++++++++++++++........ ........++++++++++++++++++++************
+ +++++++++++++++++++++++++++......... .. ...+++++++++++++++++++++**********
+ ++++++++++++++++++++++++++........... ....++++++++++++++++++++++********
+ ++++++++++++++++++++++++............. .......++++++++++++++++++++++******
+ +++++++++++++++++++++++............. ........+++++++++++++++++++++++****
+ ++++++++++++++++++++++........... ..........++++++++++++++++++++++***
+ ++++++++++++++++++++........... .........++++++++++++++++++++++*
+ ++++++++++++++++++............ ...........++++++++++++++++++++
+ ++++++++++++++++............... .............++++++++++++++++++
+ ++++++++++++++................. ...............++++++++++++++++
+ ++++++++++++.................. .................++++++++++++++
+ +++++++++.................. .................+++++++++++++
+ ++++++........ . ......... ..++++++++++++
+ ++............ ...... ....++++++++++
+ .............. ...++++++++++
+ .............. ....+++++++++
+ .............. .....++++++++
+ ............. ......++++++++
+ ........... .......++++++++
+ ......... ........+++++++
+ ......... ........+++++++
+ ......... ....+++++++
+ ........ ...+++++++
+ ....... ...+++++++
+ ....+++++++
+ .....+++++++
+ ....+++++++
+ ....+++++++
+ ....+++++++
+ Evaluated to 0.000000
+ ready> ^D
+
+At this point, you may be starting to realize that Kaleidoscope is a
+real and powerful language. It may not be self-similar :), but it can be
+used to plot things that are!
+
+With this, we conclude the "adding user-defined operators" chapter of
+the tutorial. We have successfully augmented our language, adding the
+ability to extend the language in the library, and we have shown how
+this can be used to build a simple but interesting end-user application
+in Kaleidoscope. At this point, Kaleidoscope can build a variety of
+applications that are functional and can call functions with
+side-effects, but it can't actually define and mutate a variable itself.
+
+Strikingly, variable mutation is an important feature of some languages,
+and it is not at all obvious how to `add support for mutable
+variables <LangImpl7.html>`_ without having to add an "SSA construction"
+phase to your front-end. In the next chapter, we will describe how you
+can add variable mutation without building SSA in your front-end.
+
+Full Code Listing
+=================
+
+Here is the complete code listing for our running example, enhanced with
+the if/then/else and for expressions.. To build this example, use:
+
+.. code-block:: bash
+
+ # Compile
+ clang++ -g toy.cpp `llvm-config --cxxflags --ldflags --system-libs --libs core mcjit native` -O3 -o toy
+ # Run
+ ./toy
+
+On some platforms, you will need to specify -rdynamic or
+-Wl,--export-dynamic when linking. This ensures that symbols defined in
+the main executable are exported to the dynamic linker and so are
+available for symbol resolution at run time. This is not needed if you
+compile your support code into a shared library, although doing that
+will cause problems on Windows.
+
+Here is the code:
+
+.. literalinclude:: ../../examples/Kaleidoscope/Chapter6/toy.cpp
+ :language: c++
+
+`Next: Extending the language: mutable variables / SSA
+construction <LangImpl7.html>`_
+
Added: www-releases/trunk/3.6.1/docs/_sources/tutorial/LangImpl7.txt
URL: http://llvm.org/viewvc/llvm-project/www-releases/trunk/3.6.1/docs/_sources/tutorial/LangImpl7.txt?rev=238135&view=auto
==============================================================================
--- www-releases/trunk/3.6.1/docs/_sources/tutorial/LangImpl7.txt (added)
+++ www-releases/trunk/3.6.1/docs/_sources/tutorial/LangImpl7.txt Mon May 25 08:53:02 2015
@@ -0,0 +1,860 @@
+=======================================================
+Kaleidoscope: Extending the Language: Mutable Variables
+=======================================================
+
+.. contents::
+ :local:
+
+Chapter 7 Introduction
+======================
+
+Welcome to Chapter 7 of the "`Implementing a language with
+LLVM <index.html>`_" tutorial. In chapters 1 through 6, we've built a
+very respectable, albeit simple, `functional programming
+language <http://en.wikipedia.org/wiki/Functional_programming>`_. In our
+journey, we learned some parsing techniques, how to build and represent
+an AST, how to build LLVM IR, and how to optimize the resultant code as
+well as JIT compile it.
+
+While Kaleidoscope is interesting as a functional language, the fact
+that it is functional makes it "too easy" to generate LLVM IR for it. In
+particular, a functional language makes it very easy to build LLVM IR
+directly in `SSA
+form <http://en.wikipedia.org/wiki/Static_single_assignment_form>`_.
+Since LLVM requires that the input code be in SSA form, this is a very
+nice property and it is often unclear to newcomers how to generate code
+for an imperative language with mutable variables.
+
+The short (and happy) summary of this chapter is that there is no need
+for your front-end to build SSA form: LLVM provides highly tuned and
+well tested support for this, though the way it works is a bit
+unexpected for some.
+
+Why is this a hard problem?
+===========================
+
+To understand why mutable variables cause complexities in SSA
+construction, consider this extremely simple C example:
+
+.. code-block:: c
+
+ int G, H;
+ int test(_Bool Condition) {
+ int X;
+ if (Condition)
+ X = G;
+ else
+ X = H;
+ return X;
+ }
+
+In this case, we have the variable "X", whose value depends on the path
+executed in the program. Because there are two different possible values
+for X before the return instruction, a PHI node is inserted to merge the
+two values. The LLVM IR that we want for this example looks like this:
+
+.. code-block:: llvm
+
+ @G = weak global i32 0 ; type of @G is i32*
+ @H = weak global i32 0 ; type of @H is i32*
+
+ define i32 @test(i1 %Condition) {
+ entry:
+ br i1 %Condition, label %cond_true, label %cond_false
+
+ cond_true:
+ %X.0 = load i32* @G
+ br label %cond_next
+
+ cond_false:
+ %X.1 = load i32* @H
+ br label %cond_next
+
+ cond_next:
+ %X.2 = phi i32 [ %X.1, %cond_false ], [ %X.0, %cond_true ]
+ ret i32 %X.2
+ }
+
+In this example, the loads from the G and H global variables are
+explicit in the LLVM IR, and they live in the then/else branches of the
+if statement (cond\_true/cond\_false). In order to merge the incoming
+values, the X.2 phi node in the cond\_next block selects the right value
+to use based on where control flow is coming from: if control flow comes
+from the cond\_false block, X.2 gets the value of X.1. Alternatively, if
+control flow comes from cond\_true, it gets the value of X.0. The intent
+of this chapter is not to explain the details of SSA form. For more
+information, see one of the many `online
+references <http://en.wikipedia.org/wiki/Static_single_assignment_form>`_.
+
+The question for this article is "who places the phi nodes when lowering
+assignments to mutable variables?". The issue here is that LLVM
+*requires* that its IR be in SSA form: there is no "non-ssa" mode for
+it. However, SSA construction requires non-trivial algorithms and data
+structures, so it is inconvenient and wasteful for every front-end to
+have to reproduce this logic.
+
+Memory in LLVM
+==============
+
+The 'trick' here is that while LLVM does require all register values to
+be in SSA form, it does not require (or permit) memory objects to be in
+SSA form. In the example above, note that the loads from G and H are
+direct accesses to G and H: they are not renamed or versioned. This
+differs from some other compiler systems, which do try to version memory
+objects. In LLVM, instead of encoding dataflow analysis of memory into
+the LLVM IR, it is handled with `Analysis
+Passes <../WritingAnLLVMPass.html>`_ which are computed on demand.
+
+With this in mind, the high-level idea is that we want to make a stack
+variable (which lives in memory, because it is on the stack) for each
+mutable object in a function. To take advantage of this trick, we need
+to talk about how LLVM represents stack variables.
+
+In LLVM, all memory accesses are explicit with load/store instructions,
+and it is carefully designed not to have (or need) an "address-of"
+operator. Notice how the type of the @G/@H global variables is actually
+"i32\*" even though the variable is defined as "i32". What this means is
+that @G defines *space* for an i32 in the global data area, but its
+*name* actually refers to the address for that space. Stack variables
+work the same way, except that instead of being declared with global
+variable definitions, they are declared with the `LLVM alloca
+instruction <../LangRef.html#i_alloca>`_:
+
+.. code-block:: llvm
+
+ define i32 @example() {
+ entry:
+ %X = alloca i32 ; type of %X is i32*.
+ ...
+ %tmp = load i32* %X ; load the stack value %X from the stack.
+ %tmp2 = add i32 %tmp, 1 ; increment it
+ store i32 %tmp2, i32* %X ; store it back
+ ...
+
+This code shows an example of how you can declare and manipulate a stack
+variable in the LLVM IR. Stack memory allocated with the alloca
+instruction is fully general: you can pass the address of the stack slot
+to functions, you can store it in other variables, etc. In our example
+above, we could rewrite the example to use the alloca technique to avoid
+using a PHI node:
+
+.. code-block:: llvm
+
+ @G = weak global i32 0 ; type of @G is i32*
+ @H = weak global i32 0 ; type of @H is i32*
+
+ define i32 @test(i1 %Condition) {
+ entry:
+ %X = alloca i32 ; type of %X is i32*.
+ br i1 %Condition, label %cond_true, label %cond_false
+
+ cond_true:
+ %X.0 = load i32* @G
+ store i32 %X.0, i32* %X ; Update X
+ br label %cond_next
+
+ cond_false:
+ %X.1 = load i32* @H
+ store i32 %X.1, i32* %X ; Update X
+ br label %cond_next
+
+ cond_next:
+ %X.2 = load i32* %X ; Read X
+ ret i32 %X.2
+ }
+
+With this, we have discovered a way to handle arbitrary mutable
+variables without the need to create Phi nodes at all:
+
+#. Each mutable variable becomes a stack allocation.
+#. Each read of the variable becomes a load from the stack.
+#. Each update of the variable becomes a store to the stack.
+#. Taking the address of a variable just uses the stack address
+ directly.
+
+While this solution has solved our immediate problem, it introduced
+another one: we have now apparently introduced a lot of stack traffic
+for very simple and common operations, a major performance problem.
+Fortunately for us, the LLVM optimizer has a highly-tuned optimization
+pass named "mem2reg" that handles this case, promoting allocas like this
+into SSA registers, inserting Phi nodes as appropriate. If you run this
+example through the pass, for example, you'll get:
+
+.. code-block:: bash
+
+ $ llvm-as < example.ll | opt -mem2reg | llvm-dis
+ @G = weak global i32 0
+ @H = weak global i32 0
+
+ define i32 @test(i1 %Condition) {
+ entry:
+ br i1 %Condition, label %cond_true, label %cond_false
+
+ cond_true:
+ %X.0 = load i32* @G
+ br label %cond_next
+
+ cond_false:
+ %X.1 = load i32* @H
+ br label %cond_next
+
+ cond_next:
+ %X.01 = phi i32 [ %X.1, %cond_false ], [ %X.0, %cond_true ]
+ ret i32 %X.01
+ }
+
+The mem2reg pass implements the standard "iterated dominance frontier"
+algorithm for constructing SSA form and has a number of optimizations
+that speed up (very common) degenerate cases. The mem2reg optimization
+pass is the answer to dealing with mutable variables, and we highly
+recommend that you depend on it. Note that mem2reg only works on
+variables in certain circumstances:
+
+#. mem2reg is alloca-driven: it looks for allocas and if it can handle
+ them, it promotes them. It does not apply to global variables or heap
+ allocations.
+#. mem2reg only looks for alloca instructions in the entry block of the
+ function. Being in the entry block guarantees that the alloca is only
+ executed once, which makes analysis simpler.
+#. mem2reg only promotes allocas whose uses are direct loads and stores.
+ If the address of the stack object is passed to a function, or if any
+ funny pointer arithmetic is involved, the alloca will not be
+ promoted.
+#. mem2reg only works on allocas of `first
+ class <../LangRef.html#t_classifications>`_ values (such as pointers,
+ scalars and vectors), and only if the array size of the allocation is
+ 1 (or missing in the .ll file). mem2reg is not capable of promoting
+ structs or arrays to registers. Note that the "scalarrepl" pass is
+ more powerful and can promote structs, "unions", and arrays in many
+ cases.
+
+All of these properties are easy to satisfy for most imperative
+languages, and we'll illustrate it below with Kaleidoscope. The final
+question you may be asking is: should I bother with this nonsense for my
+front-end? Wouldn't it be better if I just did SSA construction
+directly, avoiding use of the mem2reg optimization pass? In short, we
+strongly recommend that you use this technique for building SSA form,
+unless there is an extremely good reason not to. Using this technique
+is:
+
+- Proven and well tested: clang uses this technique
+ for local mutable variables. As such, the most common clients of LLVM
+ are using this to handle a bulk of their variables. You can be sure
+ that bugs are found fast and fixed early.
+- Extremely Fast: mem2reg has a number of special cases that make it
+ fast in common cases as well as fully general. For example, it has
+ fast-paths for variables that are only used in a single block,
+ variables that only have one assignment point, good heuristics to
+ avoid insertion of unneeded phi nodes, etc.
+- Needed for debug info generation: `Debug information in
+ LLVM <../SourceLevelDebugging.html>`_ relies on having the address of
+ the variable exposed so that debug info can be attached to it. This
+ technique dovetails very naturally with this style of debug info.
+
+If nothing else, this makes it much easier to get your front-end up and
+running, and is very simple to implement. Lets extend Kaleidoscope with
+mutable variables now!
+
+Mutable Variables in Kaleidoscope
+=================================
+
+Now that we know the sort of problem we want to tackle, lets see what
+this looks like in the context of our little Kaleidoscope language.
+We're going to add two features:
+
+#. The ability to mutate variables with the '=' operator.
+#. The ability to define new variables.
+
+While the first item is really what this is about, we only have
+variables for incoming arguments as well as for induction variables, and
+redefining those only goes so far :). Also, the ability to define new
+variables is a useful thing regardless of whether you will be mutating
+them. Here's a motivating example that shows how we could use these:
+
+::
+
+ # Define ':' for sequencing: as a low-precedence operator that ignores operands
+ # and just returns the RHS.
+ def binary : 1 (x y) y;
+
+ # Recursive fib, we could do this before.
+ def fib(x)
+ if (x < 3) then
+ 1
+ else
+ fib(x-1)+fib(x-2);
+
+ # Iterative fib.
+ def fibi(x)
+ var a = 1, b = 1, c in
+ (for i = 3, i < x in
+ c = a + b :
+ a = b :
+ b = c) :
+ b;
+
+ # Call it.
+ fibi(10);
+
+In order to mutate variables, we have to change our existing variables
+to use the "alloca trick". Once we have that, we'll add our new
+operator, then extend Kaleidoscope to support new variable definitions.
+
+Adjusting Existing Variables for Mutation
+=========================================
+
+The symbol table in Kaleidoscope is managed at code generation time by
+the '``NamedValues``' map. This map currently keeps track of the LLVM
+"Value\*" that holds the double value for the named variable. In order
+to support mutation, we need to change this slightly, so that it
+``NamedValues`` holds the *memory location* of the variable in question.
+Note that this change is a refactoring: it changes the structure of the
+code, but does not (by itself) change the behavior of the compiler. All
+of these changes are isolated in the Kaleidoscope code generator.
+
+At this point in Kaleidoscope's development, it only supports variables
+for two things: incoming arguments to functions and the induction
+variable of 'for' loops. For consistency, we'll allow mutation of these
+variables in addition to other user-defined variables. This means that
+these will both need memory locations.
+
+To start our transformation of Kaleidoscope, we'll change the
+NamedValues map so that it maps to AllocaInst\* instead of Value\*. Once
+we do this, the C++ compiler will tell us what parts of the code we need
+to update:
+
+.. code-block:: c++
+
+ static std::map<std::string, AllocaInst*> NamedValues;
+
+Also, since we will need to create these alloca's, we'll use a helper
+function that ensures that the allocas are created in the entry block of
+the function:
+
+.. code-block:: c++
+
+ /// CreateEntryBlockAlloca - Create an alloca instruction in the entry block of
+ /// the function. This is used for mutable variables etc.
+ static AllocaInst *CreateEntryBlockAlloca(Function *TheFunction,
+ const std::string &VarName) {
+ IRBuilder<> TmpB(&TheFunction->getEntryBlock(),
+ TheFunction->getEntryBlock().begin());
+ return TmpB.CreateAlloca(Type::getDoubleTy(getGlobalContext()), 0,
+ VarName.c_str());
+ }
+
+This funny looking code creates an IRBuilder object that is pointing at
+the first instruction (.begin()) of the entry block. It then creates an
+alloca with the expected name and returns it. Because all values in
+Kaleidoscope are doubles, there is no need to pass in a type to use.
+
+With this in place, the first functionality change we want to make is to
+variable references. In our new scheme, variables live on the stack, so
+code generating a reference to them actually needs to produce a load
+from the stack slot:
+
+.. code-block:: c++
+
+ Value *VariableExprAST::Codegen() {
+ // Look this variable up in the function.
+ Value *V = NamedValues[Name];
+ if (V == 0) return ErrorV("Unknown variable name");
+
+ // Load the value.
+ return Builder.CreateLoad(V, Name.c_str());
+ }
+
+As you can see, this is pretty straightforward. Now we need to update
+the things that define the variables to set up the alloca. We'll start
+with ``ForExprAST::Codegen`` (see the `full code listing <#code>`_ for
+the unabridged code):
+
+.. code-block:: c++
+
+ Function *TheFunction = Builder.GetInsertBlock()->getParent();
+
+ // Create an alloca for the variable in the entry block.
+ AllocaInst *Alloca = CreateEntryBlockAlloca(TheFunction, VarName);
+
+ // Emit the start code first, without 'variable' in scope.
+ Value *StartVal = Start->Codegen();
+ if (StartVal == 0) return 0;
+
+ // Store the value into the alloca.
+ Builder.CreateStore(StartVal, Alloca);
+ ...
+
+ // Compute the end condition.
+ Value *EndCond = End->Codegen();
+ if (EndCond == 0) return EndCond;
+
+ // Reload, increment, and restore the alloca. This handles the case where
+ // the body of the loop mutates the variable.
+ Value *CurVar = Builder.CreateLoad(Alloca);
+ Value *NextVar = Builder.CreateFAdd(CurVar, StepVal, "nextvar");
+ Builder.CreateStore(NextVar, Alloca);
+ ...
+
+This code is virtually identical to the code `before we allowed mutable
+variables <LangImpl5.html#forcodegen>`_. The big difference is that we
+no longer have to construct a PHI node, and we use load/store to access
+the variable as needed.
+
+To support mutable argument variables, we need to also make allocas for
+them. The code for this is also pretty simple:
+
+.. code-block:: c++
+
+ /// CreateArgumentAllocas - Create an alloca for each argument and register the
+ /// argument in the symbol table so that references to it will succeed.
+ void PrototypeAST::CreateArgumentAllocas(Function *F) {
+ Function::arg_iterator AI = F->arg_begin();
+ for (unsigned Idx = 0, e = Args.size(); Idx != e; ++Idx, ++AI) {
+ // Create an alloca for this variable.
+ AllocaInst *Alloca = CreateEntryBlockAlloca(F, Args[Idx]);
+
+ // Store the initial value into the alloca.
+ Builder.CreateStore(AI, Alloca);
+
+ // Add arguments to variable symbol table.
+ NamedValues[Args[Idx]] = Alloca;
+ }
+ }
+
+For each argument, we make an alloca, store the input value to the
+function into the alloca, and register the alloca as the memory location
+for the argument. This method gets invoked by ``FunctionAST::Codegen``
+right after it sets up the entry block for the function.
+
+The final missing piece is adding the mem2reg pass, which allows us to
+get good codegen once again:
+
+.. code-block:: c++
+
+ // Set up the optimizer pipeline. Start with registering info about how the
+ // target lays out data structures.
+ OurFPM.add(new DataLayout(*TheExecutionEngine->getDataLayout()));
+ // Promote allocas to registers.
+ OurFPM.add(createPromoteMemoryToRegisterPass());
+ // Do simple "peephole" optimizations and bit-twiddling optzns.
+ OurFPM.add(createInstructionCombiningPass());
+ // Reassociate expressions.
+ OurFPM.add(createReassociatePass());
+
+It is interesting to see what the code looks like before and after the
+mem2reg optimization runs. For example, this is the before/after code
+for our recursive fib function. Before the optimization:
+
+.. code-block:: llvm
+
+ define double @fib(double %x) {
+ entry:
+ %x1 = alloca double
+ store double %x, double* %x1
+ %x2 = load double* %x1
+ %cmptmp = fcmp ult double %x2, 3.000000e+00
+ %booltmp = uitofp i1 %cmptmp to double
+ %ifcond = fcmp one double %booltmp, 0.000000e+00
+ br i1 %ifcond, label %then, label %else
+
+ then: ; preds = %entry
+ br label %ifcont
+
+ else: ; preds = %entry
+ %x3 = load double* %x1
+ %subtmp = fsub double %x3, 1.000000e+00
+ %calltmp = call double @fib(double %subtmp)
+ %x4 = load double* %x1
+ %subtmp5 = fsub double %x4, 2.000000e+00
+ %calltmp6 = call double @fib(double %subtmp5)
+ %addtmp = fadd double %calltmp, %calltmp6
+ br label %ifcont
+
+ ifcont: ; preds = %else, %then
+ %iftmp = phi double [ 1.000000e+00, %then ], [ %addtmp, %else ]
+ ret double %iftmp
+ }
+
+Here there is only one variable (x, the input argument) but you can
+still see the extremely simple-minded code generation strategy we are
+using. In the entry block, an alloca is created, and the initial input
+value is stored into it. Each reference to the variable does a reload
+from the stack. Also, note that we didn't modify the if/then/else
+expression, so it still inserts a PHI node. While we could make an
+alloca for it, it is actually easier to create a PHI node for it, so we
+still just make the PHI.
+
+Here is the code after the mem2reg pass runs:
+
+.. code-block:: llvm
+
+ define double @fib(double %x) {
+ entry:
+ %cmptmp = fcmp ult double %x, 3.000000e+00
+ %booltmp = uitofp i1 %cmptmp to double
+ %ifcond = fcmp one double %booltmp, 0.000000e+00
+ br i1 %ifcond, label %then, label %else
+
+ then:
+ br label %ifcont
+
+ else:
+ %subtmp = fsub double %x, 1.000000e+00
+ %calltmp = call double @fib(double %subtmp)
+ %subtmp5 = fsub double %x, 2.000000e+00
+ %calltmp6 = call double @fib(double %subtmp5)
+ %addtmp = fadd double %calltmp, %calltmp6
+ br label %ifcont
+
+ ifcont: ; preds = %else, %then
+ %iftmp = phi double [ 1.000000e+00, %then ], [ %addtmp, %else ]
+ ret double %iftmp
+ }
+
+This is a trivial case for mem2reg, since there are no redefinitions of
+the variable. The point of showing this is to calm your tension about
+inserting such blatent inefficiencies :).
+
+After the rest of the optimizers run, we get:
+
+.. code-block:: llvm
+
+ define double @fib(double %x) {
+ entry:
+ %cmptmp = fcmp ult double %x, 3.000000e+00
+ %booltmp = uitofp i1 %cmptmp to double
+ %ifcond = fcmp ueq double %booltmp, 0.000000e+00
+ br i1 %ifcond, label %else, label %ifcont
+
+ else:
+ %subtmp = fsub double %x, 1.000000e+00
+ %calltmp = call double @fib(double %subtmp)
+ %subtmp5 = fsub double %x, 2.000000e+00
+ %calltmp6 = call double @fib(double %subtmp5)
+ %addtmp = fadd double %calltmp, %calltmp6
+ ret double %addtmp
+
+ ifcont:
+ ret double 1.000000e+00
+ }
+
+Here we see that the simplifycfg pass decided to clone the return
+instruction into the end of the 'else' block. This allowed it to
+eliminate some branches and the PHI node.
+
+Now that all symbol table references are updated to use stack variables,
+we'll add the assignment operator.
+
+New Assignment Operator
+=======================
+
+With our current framework, adding a new assignment operator is really
+simple. We will parse it just like any other binary operator, but handle
+it internally (instead of allowing the user to define it). The first
+step is to set a precedence:
+
+.. code-block:: c++
+
+ int main() {
+ // Install standard binary operators.
+ // 1 is lowest precedence.
+ BinopPrecedence['='] = 2;
+ BinopPrecedence['<'] = 10;
+ BinopPrecedence['+'] = 20;
+ BinopPrecedence['-'] = 20;
+
+Now that the parser knows the precedence of the binary operator, it
+takes care of all the parsing and AST generation. We just need to
+implement codegen for the assignment operator. This looks like:
+
+.. code-block:: c++
+
+ Value *BinaryExprAST::Codegen() {
+ // Special case '=' because we don't want to emit the LHS as an expression.
+ if (Op == '=') {
+ // Assignment requires the LHS to be an identifier.
+ VariableExprAST *LHSE = dynamic_cast<VariableExprAST*>(LHS);
+ if (!LHSE)
+ return ErrorV("destination of '=' must be a variable");
+
+Unlike the rest of the binary operators, our assignment operator doesn't
+follow the "emit LHS, emit RHS, do computation" model. As such, it is
+handled as a special case before the other binary operators are handled.
+The other strange thing is that it requires the LHS to be a variable. It
+is invalid to have "(x+1) = expr" - only things like "x = expr" are
+allowed.
+
+.. code-block:: c++
+
+ // Codegen the RHS.
+ Value *Val = RHS->Codegen();
+ if (Val == 0) return 0;
+
+ // Look up the name.
+ Value *Variable = NamedValues[LHSE->getName()];
+ if (Variable == 0) return ErrorV("Unknown variable name");
+
+ Builder.CreateStore(Val, Variable);
+ return Val;
+ }
+ ...
+
+Once we have the variable, codegen'ing the assignment is
+straightforward: we emit the RHS of the assignment, create a store, and
+return the computed value. Returning a value allows for chained
+assignments like "X = (Y = Z)".
+
+Now that we have an assignment operator, we can mutate loop variables
+and arguments. For example, we can now run code like this:
+
+::
+
+ # Function to print a double.
+ extern printd(x);
+
+ # Define ':' for sequencing: as a low-precedence operator that ignores operands
+ # and just returns the RHS.
+ def binary : 1 (x y) y;
+
+ def test(x)
+ printd(x) :
+ x = 4 :
+ printd(x);
+
+ test(123);
+
+When run, this example prints "123" and then "4", showing that we did
+actually mutate the value! Okay, we have now officially implemented our
+goal: getting this to work requires SSA construction in the general
+case. However, to be really useful, we want the ability to define our
+own local variables, lets add this next!
+
+User-defined Local Variables
+============================
+
+Adding var/in is just like any other other extensions we made to
+Kaleidoscope: we extend the lexer, the parser, the AST and the code
+generator. The first step for adding our new 'var/in' construct is to
+extend the lexer. As before, this is pretty trivial, the code looks like
+this:
+
+.. code-block:: c++
+
+ enum Token {
+ ...
+ // var definition
+ tok_var = -13
+ ...
+ }
+ ...
+ static int gettok() {
+ ...
+ if (IdentifierStr == "in") return tok_in;
+ if (IdentifierStr == "binary") return tok_binary;
+ if (IdentifierStr == "unary") return tok_unary;
+ if (IdentifierStr == "var") return tok_var;
+ return tok_identifier;
+ ...
+
+The next step is to define the AST node that we will construct. For
+var/in, it looks like this:
+
+.. code-block:: c++
+
+ /// VarExprAST - Expression class for var/in
+ class VarExprAST : public ExprAST {
+ std::vector<std::pair<std::string, ExprAST*> > VarNames;
+ ExprAST *Body;
+ public:
+ VarExprAST(const std::vector<std::pair<std::string, ExprAST*> > &varnames,
+ ExprAST *body)
+ : VarNames(varnames), Body(body) {}
+
+ virtual Value *Codegen();
+ };
+
+var/in allows a list of names to be defined all at once, and each name
+can optionally have an initializer value. As such, we capture this
+information in the VarNames vector. Also, var/in has a body, this body
+is allowed to access the variables defined by the var/in.
+
+With this in place, we can define the parser pieces. The first thing we
+do is add it as a primary expression:
+
+.. code-block:: c++
+
+ /// primary
+ /// ::= identifierexpr
+ /// ::= numberexpr
+ /// ::= parenexpr
+ /// ::= ifexpr
+ /// ::= forexpr
+ /// ::= varexpr
+ static ExprAST *ParsePrimary() {
+ switch (CurTok) {
+ default: return Error("unknown token when expecting an expression");
+ case tok_identifier: return ParseIdentifierExpr();
+ case tok_number: return ParseNumberExpr();
+ case '(': return ParseParenExpr();
+ case tok_if: return ParseIfExpr();
+ case tok_for: return ParseForExpr();
+ case tok_var: return ParseVarExpr();
+ }
+ }
+
+Next we define ParseVarExpr:
+
+.. code-block:: c++
+
+ /// varexpr ::= 'var' identifier ('=' expression)?
+ // (',' identifier ('=' expression)?)* 'in' expression
+ static ExprAST *ParseVarExpr() {
+ getNextToken(); // eat the var.
+
+ std::vector<std::pair<std::string, ExprAST*> > VarNames;
+
+ // At least one variable name is required.
+ if (CurTok != tok_identifier)
+ return Error("expected identifier after var");
+
+The first part of this code parses the list of identifier/expr pairs
+into the local ``VarNames`` vector.
+
+.. code-block:: c++
+
+ while (1) {
+ std::string Name = IdentifierStr;
+ getNextToken(); // eat identifier.
+
+ // Read the optional initializer.
+ ExprAST *Init = 0;
+ if (CurTok == '=') {
+ getNextToken(); // eat the '='.
+
+ Init = ParseExpression();
+ if (Init == 0) return 0;
+ }
+
+ VarNames.push_back(std::make_pair(Name, Init));
+
+ // End of var list, exit loop.
+ if (CurTok != ',') break;
+ getNextToken(); // eat the ','.
+
+ if (CurTok != tok_identifier)
+ return Error("expected identifier list after var");
+ }
+
+Once all the variables are parsed, we then parse the body and create the
+AST node:
+
+.. code-block:: c++
+
+ // At this point, we have to have 'in'.
+ if (CurTok != tok_in)
+ return Error("expected 'in' keyword after 'var'");
+ getNextToken(); // eat 'in'.
+
+ ExprAST *Body = ParseExpression();
+ if (Body == 0) return 0;
+
+ return new VarExprAST(VarNames, Body);
+ }
+
+Now that we can parse and represent the code, we need to support
+emission of LLVM IR for it. This code starts out with:
+
+.. code-block:: c++
+
+ Value *VarExprAST::Codegen() {
+ std::vector<AllocaInst *> OldBindings;
+
+ Function *TheFunction = Builder.GetInsertBlock()->getParent();
+
+ // Register all variables and emit their initializer.
+ for (unsigned i = 0, e = VarNames.size(); i != e; ++i) {
+ const std::string &VarName = VarNames[i].first;
+ ExprAST *Init = VarNames[i].second;
+
+Basically it loops over all the variables, installing them one at a
+time. For each variable we put into the symbol table, we remember the
+previous value that we replace in OldBindings.
+
+.. code-block:: c++
+
+ // Emit the initializer before adding the variable to scope, this prevents
+ // the initializer from referencing the variable itself, and permits stuff
+ // like this:
+ // var a = 1 in
+ // var a = a in ... # refers to outer 'a'.
+ Value *InitVal;
+ if (Init) {
+ InitVal = Init->Codegen();
+ if (InitVal == 0) return 0;
+ } else { // If not specified, use 0.0.
+ InitVal = ConstantFP::get(getGlobalContext(), APFloat(0.0));
+ }
+
+ AllocaInst *Alloca = CreateEntryBlockAlloca(TheFunction, VarName);
+ Builder.CreateStore(InitVal, Alloca);
+
+ // Remember the old variable binding so that we can restore the binding when
+ // we unrecurse.
+ OldBindings.push_back(NamedValues[VarName]);
+
+ // Remember this binding.
+ NamedValues[VarName] = Alloca;
+ }
+
+There are more comments here than code. The basic idea is that we emit
+the initializer, create the alloca, then update the symbol table to
+point to it. Once all the variables are installed in the symbol table,
+we evaluate the body of the var/in expression:
+
+.. code-block:: c++
+
+ // Codegen the body, now that all vars are in scope.
+ Value *BodyVal = Body->Codegen();
+ if (BodyVal == 0) return 0;
+
+Finally, before returning, we restore the previous variable bindings:
+
+.. code-block:: c++
+
+ // Pop all our variables from scope.
+ for (unsigned i = 0, e = VarNames.size(); i != e; ++i)
+ NamedValues[VarNames[i].first] = OldBindings[i];
+
+ // Return the body computation.
+ return BodyVal;
+ }
+
+The end result of all of this is that we get properly scoped variable
+definitions, and we even (trivially) allow mutation of them :).
+
+With this, we completed what we set out to do. Our nice iterative fib
+example from the intro compiles and runs just fine. The mem2reg pass
+optimizes all of our stack variables into SSA registers, inserting PHI
+nodes where needed, and our front-end remains simple: no "iterated
+dominance frontier" computation anywhere in sight.
+
+Full Code Listing
+=================
+
+Here is the complete code listing for our running example, enhanced with
+mutable variables and var/in support. To build this example, use:
+
+.. code-block:: bash
+
+ # Compile
+ clang++ -g toy.cpp `llvm-config --cxxflags --ldflags --system-libs --libs core mcjit native` -O3 -o toy
+ # Run
+ ./toy
+
+Here is the code:
+
+.. literalinclude:: ../../examples/Kaleidoscope/Chapter7/toy.cpp
+ :language: c++
+
+`Next: Conclusion and other useful LLVM tidbits <LangImpl8.html>`_
+
Added: www-releases/trunk/3.6.1/docs/_sources/tutorial/LangImpl8.txt
URL: http://llvm.org/viewvc/llvm-project/www-releases/trunk/3.6.1/docs/_sources/tutorial/LangImpl8.txt?rev=238135&view=auto
==============================================================================
--- www-releases/trunk/3.6.1/docs/_sources/tutorial/LangImpl8.txt (added)
+++ www-releases/trunk/3.6.1/docs/_sources/tutorial/LangImpl8.txt Mon May 25 08:53:02 2015
@@ -0,0 +1,459 @@
+=======================================================
+Kaleidoscope: Extending the Language: Debug Information
+=======================================================
+
+.. contents::
+ :local:
+
+Chapter 8 Introduction
+======================
+
+Welcome to Chapter 8 of the "`Implementing a language with
+LLVM <index.html>`_" tutorial. In chapters 1 through 7, we've built a
+decent little programming language with functions and variables.
+What happens if something goes wrong though, how do you debug your
+program?
+
+Source level debugging uses formatted data that helps a debugger
+translate from binary and the state of the machine back to the
+source that the programmer wrote. In LLVM we generally use a format
+called `DWARF <http://dwarfstd.org>`_. DWARF is a compact encoding
+that represents types, source locations, and variable locations.
+
+The short summary of this chapter is that we'll go through the
+various things you have to add to a programming language to
+support debug info, and how you translate that into DWARF.
+
+Caveat: For now we can't debug via the JIT, so we'll need to compile
+our program down to something small and standalone. As part of this
+we'll make a few modifications to the running of the language and
+how programs are compiled. This means that we'll have a source file
+with a simple program written in Kaleidoscope rather than the
+interactive JIT. It does involve a limitation that we can only
+have one "top level" command at a time to reduce the number of
+changes necessary.
+
+Here's the sample program we'll be compiling:
+
+.. code-block:: python
+
+ def fib(x)
+ if x < 3 then
+ 1
+ else
+ fib(x-1)+fib(x-2);
+
+ fib(10)
+
+
+Why is this a hard problem?
+===========================
+
+Debug information is a hard problem for a few different reasons - mostly
+centered around optimized code. First, optimization makes keeping source
+locations more difficult. In LLVM IR we keep the original source location
+for each IR level instruction on the instruction. Optimization passes
+should keep the source locations for newly created instructions, but merged
+instructions only get to keep a single location - this can cause jumping
+around when stepping through optimized programs. Secondly, optimization
+can move variables in ways that are either optimized out, shared in memory
+with other variables, or difficult to track. For the purposes of this
+tutorial we're going to avoid optimization (as you'll see with one of the
+next sets of patches).
+
+Ahead-of-Time Compilation Mode
+==============================
+
+To highlight only the aspects of adding debug information to a source
+language without needing to worry about the complexities of JIT debugging
+we're going to make a few changes to Kaleidoscope to support compiling
+the IR emitted by the front end into a simple standalone program that
+you can execute, debug, and see results.
+
+First we make our anonymous function that contains our top level
+statement be our "main":
+
+.. code-block:: udiff
+
+ - PrototypeAST *Proto = new PrototypeAST("", std::vector<std::string>());
+ + PrototypeAST *Proto = new PrototypeAST("main", std::vector<std::string>());
+
+just with the simple change of giving it a name.
+
+Then we're going to remove the command line code wherever it exists:
+
+.. code-block:: udiff
+
+ @@ -1129,7 +1129,6 @@ static void HandleTopLevelExpression() {
+ /// top ::= definition | external | expression | ';'
+ static void MainLoop() {
+ while (1) {
+ - fprintf(stderr, "ready> ");
+ switch (CurTok) {
+ case tok_eof:
+ return;
+ @@ -1184,7 +1183,6 @@ int main() {
+ BinopPrecedence['*'] = 40; // highest.
+
+ // Prime the first token.
+ - fprintf(stderr, "ready> ");
+ getNextToken();
+
+Lastly we're going to disable all of the optimization passes and the JIT so
+that the only thing that happens after we're done parsing and generating
+code is that the llvm IR goes to standard error:
+
+.. code-block:: udiff
+
+ @@ -1108,17 +1108,8 @@ static void HandleExtern() {
+ static void HandleTopLevelExpression() {
+ // Evaluate a top-level expression into an anonymous function.
+ if (FunctionAST *F = ParseTopLevelExpr()) {
+ - if (Function *LF = F->Codegen()) {
+ - // We're just doing this to make sure it executes.
+ - TheExecutionEngine->finalizeObject();
+ - // JIT the function, returning a function pointer.
+ - void *FPtr = TheExecutionEngine->getPointerToFunction(LF);
+ -
+ - // Cast it to the right type (takes no arguments, returns a double) so we
+ - // can call it as a native function.
+ - double (*FP)() = (double (*)())(intptr_t)FPtr;
+ - // Ignore the return value for this.
+ - (void)FP;
+ + if (!F->Codegen()) {
+ + fprintf(stderr, "Error generating code for top level expr");
+ }
+ } else {
+ // Skip token for error recovery.
+ @@ -1439,11 +1459,11 @@ int main() {
+ // target lays out data structures.
+ TheModule->setDataLayout(TheExecutionEngine->getDataLayout());
+ OurFPM.add(new DataLayoutPass());
+ +#if 0
+ OurFPM.add(createBasicAliasAnalysisPass());
+ // Promote allocas to registers.
+ OurFPM.add(createPromoteMemoryToRegisterPass());
+ @@ -1218,7 +1210,7 @@ int main() {
+ OurFPM.add(createGVNPass());
+ // Simplify the control flow graph (deleting unreachable blocks, etc).
+ OurFPM.add(createCFGSimplificationPass());
+ -
+ + #endif
+ OurFPM.doInitialization();
+
+ // Set the global so the code gen can use this.
+
+This relatively small set of changes get us to the point that we can compile
+our piece of Kaleidoscope language down to an executable program via this
+command line:
+
+.. code-block:: bash
+
+ Kaleidoscope-Ch8 < fib.ks | & clang -x ir -
+
+which gives an a.out/a.exe in the current working directory.
+
+Compile Unit
+============
+
+The top level container for a section of code in DWARF is a compile unit.
+This contains the type and function data for an individual translation unit
+(read: one file of source code). So the first thing we need to do is
+construct one for our fib.ks file.
+
+DWARF Emission Setup
+====================
+
+Similar to the ``IRBuilder`` class we have a
+```DIBuilder`` <http://llvm.org/doxygen/classllvm_1_1DIBuilder.html>`_ class
+that helps in constructing debug metadata for an llvm IR file. It
+corresponds 1:1 similarly to ``IRBuilder`` and llvm IR, but with nicer names.
+Using it does require that you be more familiar with DWARF terminology than
+you needed to be with ``IRBuilder`` and ``Instruction`` names, but if you
+read through the general documentation on the
+```Metadata Format`` <http://llvm.org/docs/SourceLevelDebugging.html>`_ it
+should be a little more clear. We'll be using this class to construct all
+of our IR level descriptions. Construction for it takes a module so we
+need to construct it shortly after we construct our module. We've left it
+as a global static variable to make it a bit easier to use.
+
+Next we're going to create a small container to cache some of our frequent
+data. The first will be our compile unit, but we'll also write a bit of
+code for our one type since we won't have to worry about multiple typed
+expressions:
+
+.. code-block:: c++
+
+ static DIBuilder *DBuilder;
+
+ struct DebugInfo {
+ DICompileUnit TheCU;
+ DIType DblTy;
+
+ DIType getDoubleTy();
+ } KSDbgInfo;
+
+ DIType DebugInfo::getDoubleTy() {
+ if (DblTy.isValid())
+ return DblTy;
+
+ DblTy = DBuilder->createBasicType("double", 64, 64, dwarf::DW_ATE_float);
+ return DblTy;
+ }
+
+And then later on in ``main`` when we're constructing our module:
+
+.. code-block:: c++
+
+ DBuilder = new DIBuilder(*TheModule);
+
+ KSDbgInfo.TheCU = DBuilder->createCompileUnit(
+ dwarf::DW_LANG_C, "fib.ks", ".", "Kaleidoscope Compiler", 0, "", 0);
+
+There are a couple of things to note here. First, while we're producing a
+compile unit for a language called Kaleidoscope we used the language
+constant for C. This is because a debugger wouldn't necessarily understand
+the calling conventions or default ABI for a language it doesn't recognize
+and we follow the C ABI in our llvm code generation so it's the closest
+thing to accurate. This ensures we can actually call functions from the
+debugger and have them execute. Secondly, you'll see the "fib.ks" in the
+call to ``createCompileUnit``. This is a default hard coded value since
+we're using shell redirection to put our source into the Kaleidoscope
+compiler. In a usual front end you'd have an input file name and it would
+go there.
+
+One last thing as part of emitting debug information via DIBuilder is that
+we need to "finalize" the debug information. The reasons are part of the
+underlying API for DIBuilder, but make sure you do this near the end of
+main:
+
+.. code-block:: c++
+
+ DBuilder->finalize();
+
+before you dump out the module.
+
+Functions
+=========
+
+Now that we have our ``Compile Unit`` and our source locations, we can add
+function definitions to the debug info. So in ``PrototypeAST::Codegen`` we
+add a few lines of code to describe a context for our subprogram, in this
+case the "File", and the actual definition of the function itself.
+
+So the context:
+
+.. code-block:: c++
+
+ DIFile Unit = DBuilder->createFile(KSDbgInfo.TheCU.getFilename(),
+ KSDbgInfo.TheCU.getDirectory());
+
+giving us a DIFile and asking the ``Compile Unit`` we created above for the
+directory and filename where we are currently. Then, for now, we use some
+source locations of 0 (since our AST doesn't currently have source location
+information) and construct our function definition:
+
+.. code-block:: c++
+
+ DIDescriptor FContext(Unit);
+ unsigned LineNo = 0;
+ unsigned ScopeLine = 0;
+ DISubprogram SP = DBuilder->createFunction(
+ FContext, Name, StringRef(), Unit, LineNo,
+ CreateFunctionType(Args.size(), Unit), false /* internal linkage */,
+ true /* definition */, ScopeLine, DIDescriptor::FlagPrototyped, false, F);
+
+and we now have a DISubprogram that contains a reference to all of our metadata
+for the function.
+
+Source Locations
+================
+
+The most important thing for debug information is accurate source location -
+this makes it possible to map your source code back. We have a problem though,
+Kaleidoscope really doesn't have any source location information in the lexer
+or parser so we'll need to add it.
+
+.. code-block:: c++
+
+ struct SourceLocation {
+ int Line;
+ int Col;
+ };
+ static SourceLocation CurLoc;
+ static SourceLocation LexLoc = {1, 0};
+
+ static int advance() {
+ int LastChar = getchar();
+
+ if (LastChar == '\n' || LastChar == '\r') {
+ LexLoc.Line++;
+ LexLoc.Col = 0;
+ } else
+ LexLoc.Col++;
+ return LastChar;
+ }
+
+In this set of code we've added some functionality on how to keep track of the
+line and column of the "source file". As we lex every token we set our current
+current "lexical location" to the assorted line and column for the beginning
+of the token. We do this by overriding all of the previous calls to
+``getchar()`` with our new ``advance()`` that keeps track of the information
+and then we have added to all of our AST classes a source location:
+
+.. code-block:: c++
+
+ class ExprAST {
+ SourceLocation Loc;
+
+ public:
+ int getLine() const { return Loc.Line; }
+ int getCol() const { return Loc.Col; }
+ ExprAST(SourceLocation Loc = CurLoc) : Loc(Loc) {}
+ virtual std::ostream &dump(std::ostream &out, int ind) {
+ return out << ':' << getLine() << ':' << getCol() << '\n';
+ }
+
+that we pass down through when we create a new expression:
+
+.. code-block:: c++
+
+ LHS = new BinaryExprAST(BinLoc, BinOp, LHS, RHS);
+
+giving us locations for each of our expressions and variables.
+
+From this we can make sure to tell ``DIBuilder`` when we're at a new source
+location so it can use that when we generate the rest of our code and make
+sure that each instruction has source location information. We do this
+by constructing another small function:
+
+.. code-block:: c++
+
+ void DebugInfo::emitLocation(ExprAST *AST) {
+ DIScope *Scope;
+ if (LexicalBlocks.empty())
+ Scope = &TheCU;
+ else
+ Scope = LexicalBlocks.back();
+ Builder.SetCurrentDebugLocation(
+ DebugLoc::get(AST->getLine(), AST->getCol(), DIScope(*Scope)));
+ }
+
+that both tells the main ``IRBuilder`` where we are, but also what scope
+we're in. Since we've just created a function above we can either be in
+the main file scope (like when we created our function), or now we can be
+in the function scope we just created. To represent this we create a stack
+of scopes:
+
+.. code-block:: c++
+
+ std::vector<DIScope *> LexicalBlocks;
+ std::map<const PrototypeAST *, DIScope> FnScopeMap;
+
+and keep a map of each function to the scope that it represents (a DISubprogram
+is also a DIScope).
+
+Then we make sure to:
+
+.. code-block:: c++
+
+ KSDbgInfo.emitLocation(this);
+
+emit the location every time we start to generate code for a new AST, and
+also:
+
+.. code-block:: c++
+
+ KSDbgInfo.FnScopeMap[this] = SP;
+
+store the scope (function) when we create it and use it:
+
+ KSDbgInfo.LexicalBlocks.push_back(&KSDbgInfo.FnScopeMap[Proto]);
+
+when we start generating the code for each function.
+
+also, don't forget to pop the scope back off of your scope stack at the
+end of the code generation for the function:
+
+.. code-block:: c++
+
+ // Pop off the lexical block for the function since we added it
+ // unconditionally.
+ KSDbgInfo.LexicalBlocks.pop_back();
+
+Variables
+=========
+
+Now that we have functions, we need to be able to print out the variables
+we have in scope. Let's get our function arguments set up so we can get
+decent backtraces and see how our functions are being called. It isn't
+a lot of code, and we generally handle it when we're creating the
+argument allocas in ``PrototypeAST::CreateArgumentAllocas``.
+
+.. code-block:: c++
+
+ DIScope *Scope = KSDbgInfo.LexicalBlocks.back();
+ DIFile Unit = DBuilder->createFile(KSDbgInfo.TheCU.getFilename(),
+ KSDbgInfo.TheCU.getDirectory());
+ DIVariable D = DBuilder->createLocalVariable(dwarf::DW_TAG_arg_variable,
+ *Scope, Args[Idx], Unit, Line,
+ KSDbgInfo.getDoubleTy(), Idx);
+
+ Instruction *Call = DBuilder->insertDeclare(
+ Alloca, D, DBuilder->createExpression(), Builder.GetInsertBlock());
+ Call->setDebugLoc(DebugLoc::get(Line, 0, *Scope));
+
+Here we're doing a few things. First, we're grabbing our current scope
+for the variable so we can say what range of code our variable is valid
+through. Second, we're creating the variable, giving it the scope,
+the name, source location, type, and since it's an argument, the argument
+index. Third, we create an ``lvm.dbg.declare`` call to indicate at the IR
+level that we've got a variable in an alloca (and it gives a starting
+location for the variable). Lastly, we set a source location for the
+beginning of the scope on the declare.
+
+One interesting thing to note at this point is that various debuggers have
+assumptions based on how code and debug information was generated for them
+in the past. In this case we need to do a little bit of a hack to avoid
+generating line information for the function prologue so that the debugger
+knows to skip over those instructions when setting a breakpoint. So in
+``FunctionAST::CodeGen`` we add a couple of lines:
+
+.. code-block:: c++
+
+ // Unset the location for the prologue emission (leading instructions with no
+ // location in a function are considered part of the prologue and the debugger
+ // will run past them when breaking on a function)
+ KSDbgInfo.emitLocation(nullptr);
+
+and then emit a new location when we actually start generating code for the
+body of the function:
+
+.. code-block:: c++
+
+ KSDbgInfo.emitLocation(Body);
+
+With this we have enough debug information to set breakpoints in functions,
+print out argument variables, and call functions. Not too bad for just a
+few simple lines of code!
+
+Full Code Listing
+=================
+
+Here is the complete code listing for our running example, enhanced with
+debug information. To build this example, use:
+
+.. code-block:: bash
+
+ # Compile
+ clang++ -g toy.cpp `llvm-config --cxxflags --ldflags --system-libs --libs core mcjit native` -O3 -o toy
+ # Run
+ ./toy
+
+Here is the code:
+
+.. literalinclude:: ../../examples/Kaleidoscope/Chapter8/toy.cpp
+ :language: c++
+
+`Next: Conclusion and other useful LLVM tidbits <LangImpl9.html>`_
+
Added: www-releases/trunk/3.6.1/docs/_sources/tutorial/LangImpl9.txt
URL: http://llvm.org/viewvc/llvm-project/www-releases/trunk/3.6.1/docs/_sources/tutorial/LangImpl9.txt?rev=238135&view=auto
==============================================================================
--- www-releases/trunk/3.6.1/docs/_sources/tutorial/LangImpl9.txt (added)
+++ www-releases/trunk/3.6.1/docs/_sources/tutorial/LangImpl9.txt Mon May 25 08:53:02 2015
@@ -0,0 +1,267 @@
+======================================================
+Kaleidoscope: Conclusion and other useful LLVM tidbits
+======================================================
+
+.. contents::
+ :local:
+
+Tutorial Conclusion
+===================
+
+Welcome to the final chapter of the "`Implementing a language with
+LLVM <index.html>`_" tutorial. In the course of this tutorial, we have
+grown our little Kaleidoscope language from being a useless toy, to
+being a semi-interesting (but probably still useless) toy. :)
+
+It is interesting to see how far we've come, and how little code it has
+taken. We built the entire lexer, parser, AST, code generator, and an
+interactive run-loop (with a JIT!) by-hand in under 700 lines of
+(non-comment/non-blank) code.
+
+Our little language supports a couple of interesting features: it
+supports user defined binary and unary operators, it uses JIT
+compilation for immediate evaluation, and it supports a few control flow
+constructs with SSA construction.
+
+Part of the idea of this tutorial was to show you how easy and fun it
+can be to define, build, and play with languages. Building a compiler
+need not be a scary or mystical process! Now that you've seen some of
+the basics, I strongly encourage you to take the code and hack on it.
+For example, try adding:
+
+- **global variables** - While global variables have questional value
+ in modern software engineering, they are often useful when putting
+ together quick little hacks like the Kaleidoscope compiler itself.
+ Fortunately, our current setup makes it very easy to add global
+ variables: just have value lookup check to see if an unresolved
+ variable is in the global variable symbol table before rejecting it.
+ To create a new global variable, make an instance of the LLVM
+ ``GlobalVariable`` class.
+- **typed variables** - Kaleidoscope currently only supports variables
+ of type double. This gives the language a very nice elegance, because
+ only supporting one type means that you never have to specify types.
+ Different languages have different ways of handling this. The easiest
+ way is to require the user to specify types for every variable
+ definition, and record the type of the variable in the symbol table
+ along with its Value\*.
+- **arrays, structs, vectors, etc** - Once you add types, you can start
+ extending the type system in all sorts of interesting ways. Simple
+ arrays are very easy and are quite useful for many different
+ applications. Adding them is mostly an exercise in learning how the
+ LLVM `getelementptr <../LangRef.html#i_getelementptr>`_ instruction
+ works: it is so nifty/unconventional, it `has its own
+ FAQ <../GetElementPtr.html>`_! If you add support for recursive types
+ (e.g. linked lists), make sure to read the `section in the LLVM
+ Programmer's Manual <../ProgrammersManual.html#TypeResolve>`_ that
+ describes how to construct them.
+- **standard runtime** - Our current language allows the user to access
+ arbitrary external functions, and we use it for things like "printd"
+ and "putchard". As you extend the language to add higher-level
+ constructs, often these constructs make the most sense if they are
+ lowered to calls into a language-supplied runtime. For example, if
+ you add hash tables to the language, it would probably make sense to
+ add the routines to a runtime, instead of inlining them all the way.
+- **memory management** - Currently we can only access the stack in
+ Kaleidoscope. It would also be useful to be able to allocate heap
+ memory, either with calls to the standard libc malloc/free interface
+ or with a garbage collector. If you would like to use garbage
+ collection, note that LLVM fully supports `Accurate Garbage
+ Collection <../GarbageCollection.html>`_ including algorithms that
+ move objects and need to scan/update the stack.
+- **debugger support** - LLVM supports generation of `DWARF Debug
+ info <../SourceLevelDebugging.html>`_ which is understood by common
+ debuggers like GDB. Adding support for debug info is fairly
+ straightforward. The best way to understand it is to compile some
+ C/C++ code with "``clang -g -O0``" and taking a look at what it
+ produces.
+- **exception handling support** - LLVM supports generation of `zero
+ cost exceptions <../ExceptionHandling.html>`_ which interoperate with
+ code compiled in other languages. You could also generate code by
+ implicitly making every function return an error value and checking
+ it. You could also make explicit use of setjmp/longjmp. There are
+ many different ways to go here.
+- **object orientation, generics, database access, complex numbers,
+ geometric programming, ...** - Really, there is no end of crazy
+ features that you can add to the language.
+- **unusual domains** - We've been talking about applying LLVM to a
+ domain that many people are interested in: building a compiler for a
+ specific language. However, there are many other domains that can use
+ compiler technology that are not typically considered. For example,
+ LLVM has been used to implement OpenGL graphics acceleration,
+ translate C++ code to ActionScript, and many other cute and clever
+ things. Maybe you will be the first to JIT compile a regular
+ expression interpreter into native code with LLVM?
+
+Have fun - try doing something crazy and unusual. Building a language
+like everyone else always has, is much less fun than trying something a
+little crazy or off the wall and seeing how it turns out. If you get
+stuck or want to talk about it, feel free to email the `llvmdev mailing
+list <http://lists.cs.uiuc.edu/mailman/listinfo/llvmdev>`_: it has lots
+of people who are interested in languages and are often willing to help
+out.
+
+Before we end this tutorial, I want to talk about some "tips and tricks"
+for generating LLVM IR. These are some of the more subtle things that
+may not be obvious, but are very useful if you want to take advantage of
+LLVM's capabilities.
+
+Properties of the LLVM IR
+=========================
+
+We have a couple common questions about code in the LLVM IR form - lets
+just get these out of the way right now, shall we?
+
+Target Independence
+-------------------
+
+Kaleidoscope is an example of a "portable language": any program written
+in Kaleidoscope will work the same way on any target that it runs on.
+Many other languages have this property, e.g. lisp, java, haskell,
+javascript, python, etc (note that while these languages are portable,
+not all their libraries are).
+
+One nice aspect of LLVM is that it is often capable of preserving target
+independence in the IR: you can take the LLVM IR for a
+Kaleidoscope-compiled program and run it on any target that LLVM
+supports, even emitting C code and compiling that on targets that LLVM
+doesn't support natively. You can trivially tell that the Kaleidoscope
+compiler generates target-independent code because it never queries for
+any target-specific information when generating code.
+
+The fact that LLVM provides a compact, target-independent,
+representation for code gets a lot of people excited. Unfortunately,
+these people are usually thinking about C or a language from the C
+family when they are asking questions about language portability. I say
+"unfortunately", because there is really no way to make (fully general)
+C code portable, other than shipping the source code around (and of
+course, C source code is not actually portable in general either - ever
+port a really old application from 32- to 64-bits?).
+
+The problem with C (again, in its full generality) is that it is heavily
+laden with target specific assumptions. As one simple example, the
+preprocessor often destructively removes target-independence from the
+code when it processes the input text:
+
+.. code-block:: c
+
+ #ifdef __i386__
+ int X = 1;
+ #else
+ int X = 42;
+ #endif
+
+While it is possible to engineer more and more complex solutions to
+problems like this, it cannot be solved in full generality in a way that
+is better than shipping the actual source code.
+
+That said, there are interesting subsets of C that can be made portable.
+If you are willing to fix primitive types to a fixed size (say int =
+32-bits, and long = 64-bits), don't care about ABI compatibility with
+existing binaries, and are willing to give up some other minor features,
+you can have portable code. This can make sense for specialized domains
+such as an in-kernel language.
+
+Safety Guarantees
+-----------------
+
+Many of the languages above are also "safe" languages: it is impossible
+for a program written in Java to corrupt its address space and crash the
+process (assuming the JVM has no bugs). Safety is an interesting
+property that requires a combination of language design, runtime
+support, and often operating system support.
+
+It is certainly possible to implement a safe language in LLVM, but LLVM
+IR does not itself guarantee safety. The LLVM IR allows unsafe pointer
+casts, use after free bugs, buffer over-runs, and a variety of other
+problems. Safety needs to be implemented as a layer on top of LLVM and,
+conveniently, several groups have investigated this. Ask on the `llvmdev
+mailing list <http://lists.cs.uiuc.edu/mailman/listinfo/llvmdev>`_ if
+you are interested in more details.
+
+Language-Specific Optimizations
+-------------------------------
+
+One thing about LLVM that turns off many people is that it does not
+solve all the world's problems in one system (sorry 'world hunger',
+someone else will have to solve you some other day). One specific
+complaint is that people perceive LLVM as being incapable of performing
+high-level language-specific optimization: LLVM "loses too much
+information".
+
+Unfortunately, this is really not the place to give you a full and
+unified version of "Chris Lattner's theory of compiler design". Instead,
+I'll make a few observations:
+
+First, you're right that LLVM does lose information. For example, as of
+this writing, there is no way to distinguish in the LLVM IR whether an
+SSA-value came from a C "int" or a C "long" on an ILP32 machine (other
+than debug info). Both get compiled down to an 'i32' value and the
+information about what it came from is lost. The more general issue
+here, is that the LLVM type system uses "structural equivalence" instead
+of "name equivalence". Another place this surprises people is if you
+have two types in a high-level language that have the same structure
+(e.g. two different structs that have a single int field): these types
+will compile down into a single LLVM type and it will be impossible to
+tell what it came from.
+
+Second, while LLVM does lose information, LLVM is not a fixed target: we
+continue to enhance and improve it in many different ways. In addition
+to adding new features (LLVM did not always support exceptions or debug
+info), we also extend the IR to capture important information for
+optimization (e.g. whether an argument is sign or zero extended,
+information about pointers aliasing, etc). Many of the enhancements are
+user-driven: people want LLVM to include some specific feature, so they
+go ahead and extend it.
+
+Third, it is *possible and easy* to add language-specific optimizations,
+and you have a number of choices in how to do it. As one trivial
+example, it is easy to add language-specific optimization passes that
+"know" things about code compiled for a language. In the case of the C
+family, there is an optimization pass that "knows" about the standard C
+library functions. If you call "exit(0)" in main(), it knows that it is
+safe to optimize that into "return 0;" because C specifies what the
+'exit' function does.
+
+In addition to simple library knowledge, it is possible to embed a
+variety of other language-specific information into the LLVM IR. If you
+have a specific need and run into a wall, please bring the topic up on
+the llvmdev list. At the very worst, you can always treat LLVM as if it
+were a "dumb code generator" and implement the high-level optimizations
+you desire in your front-end, on the language-specific AST.
+
+Tips and Tricks
+===============
+
+There is a variety of useful tips and tricks that you come to know after
+working on/with LLVM that aren't obvious at first glance. Instead of
+letting everyone rediscover them, this section talks about some of these
+issues.
+
+Implementing portable offsetof/sizeof
+-------------------------------------
+
+One interesting thing that comes up, if you are trying to keep the code
+generated by your compiler "target independent", is that you often need
+to know the size of some LLVM type or the offset of some field in an
+llvm structure. For example, you might need to pass the size of a type
+into a function that allocates memory.
+
+Unfortunately, this can vary widely across targets: for example the
+width of a pointer is trivially target-specific. However, there is a
+`clever way to use the getelementptr
+instruction <http://nondot.org/sabre/LLVMNotes/SizeOf-OffsetOf-VariableSizedStructs.txt>`_
+that allows you to compute this in a portable way.
+
+Garbage Collected Stack Frames
+------------------------------
+
+Some languages want to explicitly manage their stack frames, often so
+that they are garbage collected or to allow easy implementation of
+closures. There are often better ways to implement these features than
+explicit stack frames, but `LLVM does support
+them, <http://nondot.org/sabre/LLVMNotes/ExplicitlyManagedStackFrames.txt>`_
+if you want. It requires your front-end to convert the code into
+`Continuation Passing
+Style <http://en.wikipedia.org/wiki/Continuation-passing_style>`_ and
+the use of tail calls (which LLVM also supports).
+
Added: www-releases/trunk/3.6.1/docs/_sources/tutorial/OCamlLangImpl1.txt
URL: http://llvm.org/viewvc/llvm-project/www-releases/trunk/3.6.1/docs/_sources/tutorial/OCamlLangImpl1.txt?rev=238135&view=auto
==============================================================================
--- www-releases/trunk/3.6.1/docs/_sources/tutorial/OCamlLangImpl1.txt (added)
+++ www-releases/trunk/3.6.1/docs/_sources/tutorial/OCamlLangImpl1.txt Mon May 25 08:53:02 2015
@@ -0,0 +1,285 @@
+=================================================
+Kaleidoscope: Tutorial Introduction and the Lexer
+=================================================
+
+.. contents::
+ :local:
+
+Tutorial Introduction
+=====================
+
+Welcome to the "Implementing a language with LLVM" tutorial. This
+tutorial runs through the implementation of a simple language, showing
+how fun and easy it can be. This tutorial will get you up and started as
+well as help to build a framework you can extend to other languages. The
+code in this tutorial can also be used as a playground to hack on other
+LLVM specific things.
+
+The goal of this tutorial is to progressively unveil our language,
+describing how it is built up over time. This will let us cover a fairly
+broad range of language design and LLVM-specific usage issues, showing
+and explaining the code for it all along the way, without overwhelming
+you with tons of details up front.
+
+It is useful to point out ahead of time that this tutorial is really
+about teaching compiler techniques and LLVM specifically, *not* about
+teaching modern and sane software engineering principles. In practice,
+this means that we'll take a number of shortcuts to simplify the
+exposition. For example, the code leaks memory, uses global variables
+all over the place, doesn't use nice design patterns like
+`visitors <http://en.wikipedia.org/wiki/Visitor_pattern>`_, etc... but
+it is very simple. If you dig in and use the code as a basis for future
+projects, fixing these deficiencies shouldn't be hard.
+
+I've tried to put this tutorial together in a way that makes chapters
+easy to skip over if you are already familiar with or are uninterested
+in the various pieces. The structure of the tutorial is:
+
+- `Chapter #1 <#language>`_: Introduction to the Kaleidoscope
+ language, and the definition of its Lexer - This shows where we are
+ going and the basic functionality that we want it to do. In order to
+ make this tutorial maximally understandable and hackable, we choose
+ to implement everything in Objective Caml instead of using lexer and
+ parser generators. LLVM obviously works just fine with such tools,
+ feel free to use one if you prefer.
+- `Chapter #2 <OCamlLangImpl2.html>`_: Implementing a Parser and
+ AST - With the lexer in place, we can talk about parsing techniques
+ and basic AST construction. This tutorial describes recursive descent
+ parsing and operator precedence parsing. Nothing in Chapters 1 or 2
+ is LLVM-specific, the code doesn't even link in LLVM at this point.
+ :)
+- `Chapter #3 <OCamlLangImpl3.html>`_: Code generation to LLVM IR -
+ With the AST ready, we can show off how easy generation of LLVM IR
+ really is.
+- `Chapter #4 <OCamlLangImpl4.html>`_: Adding JIT and Optimizer
+ Support - Because a lot of people are interested in using LLVM as a
+ JIT, we'll dive right into it and show you the 3 lines it takes to
+ add JIT support. LLVM is also useful in many other ways, but this is
+ one simple and "sexy" way to shows off its power. :)
+- `Chapter #5 <OCamlLangImpl5.html>`_: Extending the Language:
+ Control Flow - With the language up and running, we show how to
+ extend it with control flow operations (if/then/else and a 'for'
+ loop). This gives us a chance to talk about simple SSA construction
+ and control flow.
+- `Chapter #6 <OCamlLangImpl6.html>`_: Extending the Language:
+ User-defined Operators - This is a silly but fun chapter that talks
+ about extending the language to let the user program define their own
+ arbitrary unary and binary operators (with assignable precedence!).
+ This lets us build a significant piece of the "language" as library
+ routines.
+- `Chapter #7 <OCamlLangImpl7.html>`_: Extending the Language:
+ Mutable Variables - This chapter talks about adding user-defined
+ local variables along with an assignment operator. The interesting
+ part about this is how easy and trivial it is to construct SSA form
+ in LLVM: no, LLVM does *not* require your front-end to construct SSA
+ form!
+- `Chapter #8 <OCamlLangImpl8.html>`_: Conclusion and other useful
+ LLVM tidbits - This chapter wraps up the series by talking about
+ potential ways to extend the language, but also includes a bunch of
+ pointers to info about "special topics" like adding garbage
+ collection support, exceptions, debugging, support for "spaghetti
+ stacks", and a bunch of other tips and tricks.
+
+By the end of the tutorial, we'll have written a bit less than 700 lines
+of non-comment, non-blank, lines of code. With this small amount of
+code, we'll have built up a very reasonable compiler for a non-trivial
+language including a hand-written lexer, parser, AST, as well as code
+generation support with a JIT compiler. While other systems may have
+interesting "hello world" tutorials, I think the breadth of this
+tutorial is a great testament to the strengths of LLVM and why you
+should consider it if you're interested in language or compiler design.
+
+A note about this tutorial: we expect you to extend the language and
+play with it on your own. Take the code and go crazy hacking away at it,
+compilers don't need to be scary creatures - it can be a lot of fun to
+play with languages!
+
+The Basic Language
+==================
+
+This tutorial will be illustrated with a toy language that we'll call
+"`Kaleidoscope <http://en.wikipedia.org/wiki/Kaleidoscope>`_" (derived
+from "meaning beautiful, form, and view"). Kaleidoscope is a procedural
+language that allows you to define functions, use conditionals, math,
+etc. Over the course of the tutorial, we'll extend Kaleidoscope to
+support the if/then/else construct, a for loop, user defined operators,
+JIT compilation with a simple command line interface, etc.
+
+Because we want to keep things simple, the only datatype in Kaleidoscope
+is a 64-bit floating point type (aka 'float' in O'Caml parlance). As
+such, all values are implicitly double precision and the language
+doesn't require type declarations. This gives the language a very nice
+and simple syntax. For example, the following simple example computes
+`Fibonacci numbers: <http://en.wikipedia.org/wiki/Fibonacci_number>`_
+
+::
+
+ # Compute the x'th fibonacci number.
+ def fib(x)
+ if x < 3 then
+ 1
+ else
+ fib(x-1)+fib(x-2)
+
+ # This expression will compute the 40th number.
+ fib(40)
+
+We also allow Kaleidoscope to call into standard library functions (the
+LLVM JIT makes this completely trivial). This means that you can use the
+'extern' keyword to define a function before you use it (this is also
+useful for mutually recursive functions). For example:
+
+::
+
+ extern sin(arg);
+ extern cos(arg);
+ extern atan2(arg1 arg2);
+
+ atan2(sin(.4), cos(42))
+
+A more interesting example is included in Chapter 6 where we write a
+little Kaleidoscope application that `displays a Mandelbrot
+Set <OCamlLangImpl6.html#example>`_ at various levels of magnification.
+
+Lets dive into the implementation of this language!
+
+The Lexer
+=========
+
+When it comes to implementing a language, the first thing needed is the
+ability to process a text file and recognize what it says. The
+traditional way to do this is to use a
+"`lexer <http://en.wikipedia.org/wiki/Lexical_analysis>`_" (aka
+'scanner') to break the input up into "tokens". Each token returned by
+the lexer includes a token code and potentially some metadata (e.g. the
+numeric value of a number). First, we define the possibilities:
+
+.. code-block:: ocaml
+
+ (* The lexer returns these 'Kwd' if it is an unknown character, otherwise one of
+ * these others for known things. *)
+ type token =
+ (* commands *)
+ | Def | Extern
+
+ (* primary *)
+ | Ident of string | Number of float
+
+ (* unknown *)
+ | Kwd of char
+
+Each token returned by our lexer will be one of the token variant
+values. An unknown character like '+' will be returned as
+``Token.Kwd '+'``. If the curr token is an identifier, the value will be
+``Token.Ident s``. If the current token is a numeric literal (like 1.0),
+the value will be ``Token.Number 1.0``.
+
+The actual implementation of the lexer is a collection of functions
+driven by a function named ``Lexer.lex``. The ``Lexer.lex`` function is
+called to return the next token from standard input. We will use
+`Camlp4 <http://caml.inria.fr/pub/docs/manual-camlp4/index.html>`_ to
+simplify the tokenization of the standard input. Its definition starts
+as:
+
+.. code-block:: ocaml
+
+ (*===----------------------------------------------------------------------===
+ * Lexer
+ *===----------------------------------------------------------------------===*)
+
+ let rec lex = parser
+ (* Skip any whitespace. *)
+ | [< ' (' ' | '\n' | '\r' | '\t'); stream >] -> lex stream
+
+``Lexer.lex`` works by recursing over a ``char Stream.t`` to read
+characters one at a time from the standard input. It eats them as it
+recognizes them and stores them in in a ``Token.token`` variant. The
+first thing that it has to do is ignore whitespace between tokens. This
+is accomplished with the recursive call above.
+
+The next thing ``Lexer.lex`` needs to do is recognize identifiers and
+specific keywords like "def". Kaleidoscope does this with a pattern
+match and a helper function.
+
+.. code-block:: ocaml
+
+ (* identifier: [a-zA-Z][a-zA-Z0-9] *)
+ | [< ' ('A' .. 'Z' | 'a' .. 'z' as c); stream >] ->
+ let buffer = Buffer.create 1 in
+ Buffer.add_char buffer c;
+ lex_ident buffer stream
+
+ ...
+
+ and lex_ident buffer = parser
+ | [< ' ('A' .. 'Z' | 'a' .. 'z' | '0' .. '9' as c); stream >] ->
+ Buffer.add_char buffer c;
+ lex_ident buffer stream
+ | [< stream=lex >] ->
+ match Buffer.contents buffer with
+ | "def" -> [< 'Token.Def; stream >]
+ | "extern" -> [< 'Token.Extern; stream >]
+ | id -> [< 'Token.Ident id; stream >]
+
+Numeric values are similar:
+
+.. code-block:: ocaml
+
+ (* number: [0-9.]+ *)
+ | [< ' ('0' .. '9' as c); stream >] ->
+ let buffer = Buffer.create 1 in
+ Buffer.add_char buffer c;
+ lex_number buffer stream
+
+ ...
+
+ and lex_number buffer = parser
+ | [< ' ('0' .. '9' | '.' as c); stream >] ->
+ Buffer.add_char buffer c;
+ lex_number buffer stream
+ | [< stream=lex >] ->
+ [< 'Token.Number (float_of_string (Buffer.contents buffer)); stream >]
+
+This is all pretty straight-forward code for processing input. When
+reading a numeric value from input, we use the ocaml ``float_of_string``
+function to convert it to a numeric value that we store in
+``Token.Number``. Note that this isn't doing sufficient error checking:
+it will raise ``Failure`` if the string "1.23.45.67". Feel free to
+extend it :). Next we handle comments:
+
+.. code-block:: ocaml
+
+ (* Comment until end of line. *)
+ | [< ' ('#'); stream >] ->
+ lex_comment stream
+
+ ...
+
+ and lex_comment = parser
+ | [< ' ('\n'); stream=lex >] -> stream
+ | [< 'c; e=lex_comment >] -> e
+ | [< >] -> [< >]
+
+We handle comments by skipping to the end of the line and then return
+the next token. Finally, if the input doesn't match one of the above
+cases, it is either an operator character like '+' or the end of the
+file. These are handled with this code:
+
+.. code-block:: ocaml
+
+ (* Otherwise, just return the character as its ascii value. *)
+ | [< 'c; stream >] ->
+ [< 'Token.Kwd c; lex stream >]
+
+ (* end of stream. *)
+ | [< >] -> [< >]
+
+With this, we have the complete lexer for the basic Kaleidoscope
+language (the `full code listing <OCamlLangImpl2.html#code>`_ for the
+Lexer is available in the `next chapter <OCamlLangImpl2.html>`_ of the
+tutorial). Next we'll `build a simple parser that uses this to build an
+Abstract Syntax Tree <OCamlLangImpl2.html>`_. When we have that, we'll
+include a driver so that you can use the lexer and parser together.
+
+`Next: Implementing a Parser and AST <OCamlLangImpl2.html>`_
+
Added: www-releases/trunk/3.6.1/docs/_sources/tutorial/OCamlLangImpl2.txt
URL: http://llvm.org/viewvc/llvm-project/www-releases/trunk/3.6.1/docs/_sources/tutorial/OCamlLangImpl2.txt?rev=238135&view=auto
==============================================================================
--- www-releases/trunk/3.6.1/docs/_sources/tutorial/OCamlLangImpl2.txt (added)
+++ www-releases/trunk/3.6.1/docs/_sources/tutorial/OCamlLangImpl2.txt Mon May 25 08:53:02 2015
@@ -0,0 +1,899 @@
+===========================================
+Kaleidoscope: Implementing a Parser and AST
+===========================================
+
+.. contents::
+ :local:
+
+Chapter 2 Introduction
+======================
+
+Welcome to Chapter 2 of the "`Implementing a language with LLVM in
+Objective Caml <index.html>`_" tutorial. This chapter shows you how to
+use the lexer, built in `Chapter 1 <OCamlLangImpl1.html>`_, to build a
+full `parser <http://en.wikipedia.org/wiki/Parsing>`_ for our
+Kaleidoscope language. Once we have a parser, we'll define and build an
+`Abstract Syntax
+Tree <http://en.wikipedia.org/wiki/Abstract_syntax_tree>`_ (AST).
+
+The parser we will build uses a combination of `Recursive Descent
+Parsing <http://en.wikipedia.org/wiki/Recursive_descent_parser>`_ and
+`Operator-Precedence
+Parsing <http://en.wikipedia.org/wiki/Operator-precedence_parser>`_ to
+parse the Kaleidoscope language (the latter for binary expressions and
+the former for everything else). Before we get to parsing though, lets
+talk about the output of the parser: the Abstract Syntax Tree.
+
+The Abstract Syntax Tree (AST)
+==============================
+
+The AST for a program captures its behavior in such a way that it is
+easy for later stages of the compiler (e.g. code generation) to
+interpret. We basically want one object for each construct in the
+language, and the AST should closely model the language. In
+Kaleidoscope, we have expressions, a prototype, and a function object.
+We'll start with expressions first:
+
+.. code-block:: ocaml
+
+ (* expr - Base type for all expression nodes. *)
+ type expr =
+ (* variant for numeric literals like "1.0". *)
+ | Number of float
+
+The code above shows the definition of the base ExprAST class and one
+subclass which we use for numeric literals. The important thing to note
+about this code is that the Number variant captures the numeric value of
+the literal as an instance variable. This allows later phases of the
+compiler to know what the stored numeric value is.
+
+Right now we only create the AST, so there are no useful functions on
+them. It would be very easy to add a function to pretty print the code,
+for example. Here are the other expression AST node definitions that
+we'll use in the basic form of the Kaleidoscope language:
+
+.. code-block:: ocaml
+
+ (* variant for referencing a variable, like "a". *)
+ | Variable of string
+
+ (* variant for a binary operator. *)
+ | Binary of char * expr * expr
+
+ (* variant for function calls. *)
+ | Call of string * expr array
+
+This is all (intentionally) rather straight-forward: variables capture
+the variable name, binary operators capture their opcode (e.g. '+'), and
+calls capture a function name as well as a list of any argument
+expressions. One thing that is nice about our AST is that it captures
+the language features without talking about the syntax of the language.
+Note that there is no discussion about precedence of binary operators,
+lexical structure, etc.
+
+For our basic language, these are all of the expression nodes we'll
+define. Because it doesn't have conditional control flow, it isn't
+Turing-complete; we'll fix that in a later installment. The two things
+we need next are a way to talk about the interface to a function, and a
+way to talk about functions themselves:
+
+.. code-block:: ocaml
+
+ (* proto - This type represents the "prototype" for a function, which captures
+ * its name, and its argument names (thus implicitly the number of arguments the
+ * function takes). *)
+ type proto = Prototype of string * string array
+
+ (* func - This type represents a function definition itself. *)
+ type func = Function of proto * expr
+
+In Kaleidoscope, functions are typed with just a count of their
+arguments. Since all values are double precision floating point, the
+type of each argument doesn't need to be stored anywhere. In a more
+aggressive and realistic language, the "expr" variants would probably
+have a type field.
+
+With this scaffolding, we can now talk about parsing expressions and
+function bodies in Kaleidoscope.
+
+Parser Basics
+=============
+
+Now that we have an AST to build, we need to define the parser code to
+build it. The idea here is that we want to parse something like "x+y"
+(which is returned as three tokens by the lexer) into an AST that could
+be generated with calls like this:
+
+.. code-block:: ocaml
+
+ let x = Variable "x" in
+ let y = Variable "y" in
+ let result = Binary ('+', x, y) in
+ ...
+
+The error handling routines make use of the builtin ``Stream.Failure``
+and ``Stream.Error``s. ``Stream.Failure`` is raised when the parser is
+unable to find any matching token in the first position of a pattern.
+``Stream.Error`` is raised when the first token matches, but the rest do
+not. The error recovery in our parser will not be the best and is not
+particular user-friendly, but it will be enough for our tutorial. These
+exceptions make it easier to handle errors in routines that have various
+return types.
+
+With these basic types and exceptions, we can implement the first piece
+of our grammar: numeric literals.
+
+Basic Expression Parsing
+========================
+
+We start with numeric literals, because they are the simplest to
+process. For each production in our grammar, we'll define a function
+which parses that production. We call this class of expressions
+"primary" expressions, for reasons that will become more clear `later in
+the tutorial <OCamlLangImpl6.html#unary>`_. In order to parse an
+arbitrary primary expression, we need to determine what sort of
+expression it is. For numeric literals, we have:
+
+.. code-block:: ocaml
+
+ (* primary
+ * ::= identifier
+ * ::= numberexpr
+ * ::= parenexpr *)
+ parse_primary = parser
+ (* numberexpr ::= number *)
+ | [< 'Token.Number n >] -> Ast.Number n
+
+This routine is very simple: it expects to be called when the current
+token is a ``Token.Number`` token. It takes the current number value,
+creates a ``Ast.Number`` node, advances the lexer to the next token, and
+finally returns.
+
+There are some interesting aspects to this. The most important one is
+that this routine eats all of the tokens that correspond to the
+production and returns the lexer buffer with the next token (which is
+not part of the grammar production) ready to go. This is a fairly
+standard way to go for recursive descent parsers. For a better example,
+the parenthesis operator is defined like this:
+
+.. code-block:: ocaml
+
+ (* parenexpr ::= '(' expression ')' *)
+ | [< 'Token.Kwd '('; e=parse_expr; 'Token.Kwd ')' ?? "expected ')'" >] -> e
+
+This function illustrates a number of interesting things about the
+parser:
+
+1) It shows how we use the ``Stream.Error`` exception. When called, this
+function expects that the current token is a '(' token, but after
+parsing the subexpression, it is possible that there is no ')' waiting.
+For example, if the user types in "(4 x" instead of "(4)", the parser
+should emit an error. Because errors can occur, the parser needs a way
+to indicate that they happened. In our parser, we use the camlp4
+shortcut syntax ``token ?? "parse error"``, where if the token before
+the ``??`` does not match, then ``Stream.Error "parse error"`` will be
+raised.
+
+2) Another interesting aspect of this function is that it uses recursion
+by calling ``Parser.parse_primary`` (we will soon see that
+``Parser.parse_primary`` can call ``Parser.parse_primary``). This is
+powerful because it allows us to handle recursive grammars, and keeps
+each production very simple. Note that parentheses do not cause
+construction of AST nodes themselves. While we could do it this way, the
+most important role of parentheses are to guide the parser and provide
+grouping. Once the parser constructs the AST, parentheses are not
+needed.
+
+The next simple production is for handling variable references and
+function calls:
+
+.. code-block:: ocaml
+
+ (* identifierexpr
+ * ::= identifier
+ * ::= identifier '(' argumentexpr ')' *)
+ | [< 'Token.Ident id; stream >] ->
+ let rec parse_args accumulator = parser
+ | [< e=parse_expr; stream >] ->
+ begin parser
+ | [< 'Token.Kwd ','; e=parse_args (e :: accumulator) >] -> e
+ | [< >] -> e :: accumulator
+ end stream
+ | [< >] -> accumulator
+ in
+ let rec parse_ident id = parser
+ (* Call. *)
+ | [< 'Token.Kwd '(';
+ args=parse_args [];
+ 'Token.Kwd ')' ?? "expected ')'">] ->
+ Ast.Call (id, Array.of_list (List.rev args))
+
+ (* Simple variable ref. *)
+ | [< >] -> Ast.Variable id
+ in
+ parse_ident id stream
+
+This routine follows the same style as the other routines. (It expects
+to be called if the current token is a ``Token.Ident`` token). It also
+has recursion and error handling. One interesting aspect of this is that
+it uses *look-ahead* to determine if the current identifier is a stand
+alone variable reference or if it is a function call expression. It
+handles this by checking to see if the token after the identifier is a
+'(' token, constructing either a ``Ast.Variable`` or ``Ast.Call`` node
+as appropriate.
+
+We finish up by raising an exception if we received a token we didn't
+expect:
+
+.. code-block:: ocaml
+
+ | [< >] -> raise (Stream.Error "unknown token when expecting an expression.")
+
+Now that basic expressions are handled, we need to handle binary
+expressions. They are a bit more complex.
+
+Binary Expression Parsing
+=========================
+
+Binary expressions are significantly harder to parse because they are
+often ambiguous. For example, when given the string "x+y\*z", the parser
+can choose to parse it as either "(x+y)\*z" or "x+(y\*z)". With common
+definitions from mathematics, we expect the later parse, because "\*"
+(multiplication) has higher *precedence* than "+" (addition).
+
+There are many ways to handle this, but an elegant and efficient way is
+to use `Operator-Precedence
+Parsing <http://en.wikipedia.org/wiki/Operator-precedence_parser>`_.
+This parsing technique uses the precedence of binary operators to guide
+recursion. To start with, we need a table of precedences:
+
+.. code-block:: ocaml
+
+ (* binop_precedence - This holds the precedence for each binary operator that is
+ * defined *)
+ let binop_precedence:(char, int) Hashtbl.t = Hashtbl.create 10
+
+ (* precedence - Get the precedence of the pending binary operator token. *)
+ let precedence c = try Hashtbl.find binop_precedence c with Not_found -> -1
+
+ ...
+
+ let main () =
+ (* Install standard binary operators.
+ * 1 is the lowest precedence. *)
+ Hashtbl.add Parser.binop_precedence '<' 10;
+ Hashtbl.add Parser.binop_precedence '+' 20;
+ Hashtbl.add Parser.binop_precedence '-' 20;
+ Hashtbl.add Parser.binop_precedence '*' 40; (* highest. *)
+ ...
+
+For the basic form of Kaleidoscope, we will only support 4 binary
+operators (this can obviously be extended by you, our brave and intrepid
+reader). The ``Parser.precedence`` function returns the precedence for
+the current token, or -1 if the token is not a binary operator. Having a
+``Hashtbl.t`` makes it easy to add new operators and makes it clear that
+the algorithm doesn't depend on the specific operators involved, but it
+would be easy enough to eliminate the ``Hashtbl.t`` and do the
+comparisons in the ``Parser.precedence`` function. (Or just use a
+fixed-size array).
+
+With the helper above defined, we can now start parsing binary
+expressions. The basic idea of operator precedence parsing is to break
+down an expression with potentially ambiguous binary operators into
+pieces. Consider ,for example, the expression "a+b+(c+d)\*e\*f+g".
+Operator precedence parsing considers this as a stream of primary
+expressions separated by binary operators. As such, it will first parse
+the leading primary expression "a", then it will see the pairs [+, b]
+[+, (c+d)] [\*, e] [\*, f] and [+, g]. Note that because parentheses are
+primary expressions, the binary expression parser doesn't need to worry
+about nested subexpressions like (c+d) at all.
+
+To start, an expression is a primary expression potentially followed by
+a sequence of [binop,primaryexpr] pairs:
+
+.. code-block:: ocaml
+
+ (* expression
+ * ::= primary binoprhs *)
+ and parse_expr = parser
+ | [< lhs=parse_primary; stream >] -> parse_bin_rhs 0 lhs stream
+
+``Parser.parse_bin_rhs`` is the function that parses the sequence of
+pairs for us. It takes a precedence and a pointer to an expression for
+the part that has been parsed so far. Note that "x" is a perfectly valid
+expression: As such, "binoprhs" is allowed to be empty, in which case it
+returns the expression that is passed into it. In our example above, the
+code passes the expression for "a" into ``Parser.parse_bin_rhs`` and the
+current token is "+".
+
+The precedence value passed into ``Parser.parse_bin_rhs`` indicates the
+*minimal operator precedence* that the function is allowed to eat. For
+example, if the current pair stream is [+, x] and
+``Parser.parse_bin_rhs`` is passed in a precedence of 40, it will not
+consume any tokens (because the precedence of '+' is only 20). With this
+in mind, ``Parser.parse_bin_rhs`` starts with:
+
+.. code-block:: ocaml
+
+ (* binoprhs
+ * ::= ('+' primary)* *)
+ and parse_bin_rhs expr_prec lhs stream =
+ match Stream.peek stream with
+ (* If this is a binop, find its precedence. *)
+ | Some (Token.Kwd c) when Hashtbl.mem binop_precedence c ->
+ let token_prec = precedence c in
+
+ (* If this is a binop that binds at least as tightly as the current binop,
+ * consume it, otherwise we are done. *)
+ if token_prec < expr_prec then lhs else begin
+
+This code gets the precedence of the current token and checks to see if
+if is too low. Because we defined invalid tokens to have a precedence of
+-1, this check implicitly knows that the pair-stream ends when the token
+stream runs out of binary operators. If this check succeeds, we know
+that the token is a binary operator and that it will be included in this
+expression:
+
+.. code-block:: ocaml
+
+ (* Eat the binop. *)
+ Stream.junk stream;
+
+ (* Parse the primary expression after the binary operator *)
+ let rhs = parse_primary stream in
+
+ (* Okay, we know this is a binop. *)
+ let rhs =
+ match Stream.peek stream with
+ | Some (Token.Kwd c2) ->
+
+As such, this code eats (and remembers) the binary operator and then
+parses the primary expression that follows. This builds up the whole
+pair, the first of which is [+, b] for the running example.
+
+Now that we parsed the left-hand side of an expression and one pair of
+the RHS sequence, we have to decide which way the expression associates.
+In particular, we could have "(a+b) binop unparsed" or "a + (b binop
+unparsed)". To determine this, we look ahead at "binop" to determine its
+precedence and compare it to BinOp's precedence (which is '+' in this
+case):
+
+.. code-block:: ocaml
+
+ (* If BinOp binds less tightly with rhs than the operator after
+ * rhs, let the pending operator take rhs as its lhs. *)
+ let next_prec = precedence c2 in
+ if token_prec < next_prec
+
+If the precedence of the binop to the right of "RHS" is lower or equal
+to the precedence of our current operator, then we know that the
+parentheses associate as "(a+b) binop ...". In our example, the current
+operator is "+" and the next operator is "+", we know that they have the
+same precedence. In this case we'll create the AST node for "a+b", and
+then continue parsing:
+
+.. code-block:: ocaml
+
+ ... if body omitted ...
+ in
+
+ (* Merge lhs/rhs. *)
+ let lhs = Ast.Binary (c, lhs, rhs) in
+ parse_bin_rhs expr_prec lhs stream
+ end
+
+In our example above, this will turn "a+b+" into "(a+b)" and execute the
+next iteration of the loop, with "+" as the current token. The code
+above will eat, remember, and parse "(c+d)" as the primary expression,
+which makes the current pair equal to [+, (c+d)]. It will then evaluate
+the 'if' conditional above with "\*" as the binop to the right of the
+primary. In this case, the precedence of "\*" is higher than the
+precedence of "+" so the if condition will be entered.
+
+The critical question left here is "how can the if condition parse the
+right hand side in full"? In particular, to build the AST correctly for
+our example, it needs to get all of "(c+d)\*e\*f" as the RHS expression
+variable. The code to do this is surprisingly simple (code from the
+above two blocks duplicated for context):
+
+.. code-block:: ocaml
+
+ match Stream.peek stream with
+ | Some (Token.Kwd c2) ->
+ (* If BinOp binds less tightly with rhs than the operator after
+ * rhs, let the pending operator take rhs as its lhs. *)
+ if token_prec < precedence c2
+ then parse_bin_rhs (token_prec + 1) rhs stream
+ else rhs
+ | _ -> rhs
+ in
+
+ (* Merge lhs/rhs. *)
+ let lhs = Ast.Binary (c, lhs, rhs) in
+ parse_bin_rhs expr_prec lhs stream
+ end
+
+At this point, we know that the binary operator to the RHS of our
+primary has higher precedence than the binop we are currently parsing.
+As such, we know that any sequence of pairs whose operators are all
+higher precedence than "+" should be parsed together and returned as
+"RHS". To do this, we recursively invoke the ``Parser.parse_bin_rhs``
+function specifying "token\_prec+1" as the minimum precedence required
+for it to continue. In our example above, this will cause it to return
+the AST node for "(c+d)\*e\*f" as RHS, which is then set as the RHS of
+the '+' expression.
+
+Finally, on the next iteration of the while loop, the "+g" piece is
+parsed and added to the AST. With this little bit of code (14
+non-trivial lines), we correctly handle fully general binary expression
+parsing in a very elegant way. This was a whirlwind tour of this code,
+and it is somewhat subtle. I recommend running through it with a few
+tough examples to see how it works.
+
+This wraps up handling of expressions. At this point, we can point the
+parser at an arbitrary token stream and build an expression from it,
+stopping at the first token that is not part of the expression. Next up
+we need to handle function definitions, etc.
+
+Parsing the Rest
+================
+
+The next thing missing is handling of function prototypes. In
+Kaleidoscope, these are used both for 'extern' function declarations as
+well as function body definitions. The code to do this is
+straight-forward and not very interesting (once you've survived
+expressions):
+
+.. code-block:: ocaml
+
+ (* prototype
+ * ::= id '(' id* ')' *)
+ let parse_prototype =
+ let rec parse_args accumulator = parser
+ | [< 'Token.Ident id; e=parse_args (id::accumulator) >] -> e
+ | [< >] -> accumulator
+ in
+
+ parser
+ | [< 'Token.Ident id;
+ 'Token.Kwd '(' ?? "expected '(' in prototype";
+ args=parse_args [];
+ 'Token.Kwd ')' ?? "expected ')' in prototype" >] ->
+ (* success. *)
+ Ast.Prototype (id, Array.of_list (List.rev args))
+
+ | [< >] ->
+ raise (Stream.Error "expected function name in prototype")
+
+Given this, a function definition is very simple, just a prototype plus
+an expression to implement the body:
+
+.. code-block:: ocaml
+
+ (* definition ::= 'def' prototype expression *)
+ let parse_definition = parser
+ | [< 'Token.Def; p=parse_prototype; e=parse_expr >] ->
+ Ast.Function (p, e)
+
+In addition, we support 'extern' to declare functions like 'sin' and
+'cos' as well as to support forward declaration of user functions. These
+'extern's are just prototypes with no body:
+
+.. code-block:: ocaml
+
+ (* external ::= 'extern' prototype *)
+ let parse_extern = parser
+ | [< 'Token.Extern; e=parse_prototype >] -> e
+
+Finally, we'll also let the user type in arbitrary top-level expressions
+and evaluate them on the fly. We will handle this by defining anonymous
+nullary (zero argument) functions for them:
+
+.. code-block:: ocaml
+
+ (* toplevelexpr ::= expression *)
+ let parse_toplevel = parser
+ | [< e=parse_expr >] ->
+ (* Make an anonymous proto. *)
+ Ast.Function (Ast.Prototype ("", [||]), e)
+
+Now that we have all the pieces, let's build a little driver that will
+let us actually *execute* this code we've built!
+
+The Driver
+==========
+
+The driver for this simply invokes all of the parsing pieces with a
+top-level dispatch loop. There isn't much interesting here, so I'll just
+include the top-level loop. See `below <#code>`_ for full code in the
+"Top-Level Parsing" section.
+
+.. code-block:: ocaml
+
+ (* top ::= definition | external | expression | ';' *)
+ let rec main_loop stream =
+ match Stream.peek stream with
+ | None -> ()
+
+ (* ignore top-level semicolons. *)
+ | Some (Token.Kwd ';') ->
+ Stream.junk stream;
+ main_loop stream
+
+ | Some token ->
+ begin
+ try match token with
+ | Token.Def ->
+ ignore(Parser.parse_definition stream);
+ print_endline "parsed a function definition.";
+ | Token.Extern ->
+ ignore(Parser.parse_extern stream);
+ print_endline "parsed an extern.";
+ | _ ->
+ (* Evaluate a top-level expression into an anonymous function. *)
+ ignore(Parser.parse_toplevel stream);
+ print_endline "parsed a top-level expr";
+ with Stream.Error s ->
+ (* Skip token for error recovery. *)
+ Stream.junk stream;
+ print_endline s;
+ end;
+ print_string "ready> "; flush stdout;
+ main_loop stream
+
+The most interesting part of this is that we ignore top-level
+semicolons. Why is this, you ask? The basic reason is that if you type
+"4 + 5" at the command line, the parser doesn't know whether that is the
+end of what you will type or not. For example, on the next line you
+could type "def foo..." in which case 4+5 is the end of a top-level
+expression. Alternatively you could type "\* 6", which would continue
+the expression. Having top-level semicolons allows you to type "4+5;",
+and the parser will know you are done.
+
+Conclusions
+===========
+
+With just under 300 lines of commented code (240 lines of non-comment,
+non-blank code), we fully defined our minimal language, including a
+lexer, parser, and AST builder. With this done, the executable will
+validate Kaleidoscope code and tell us if it is grammatically invalid.
+For example, here is a sample interaction:
+
+.. code-block:: bash
+
+ $ ./toy.byte
+ ready> def foo(x y) x+foo(y, 4.0);
+ Parsed a function definition.
+ ready> def foo(x y) x+y y;
+ Parsed a function definition.
+ Parsed a top-level expr
+ ready> def foo(x y) x+y );
+ Parsed a function definition.
+ Error: unknown token when expecting an expression
+ ready> extern sin(a);
+ ready> Parsed an extern
+ ready> ^D
+ $
+
+There is a lot of room for extension here. You can define new AST nodes,
+extend the language in many ways, etc. In the `next
+installment <OCamlLangImpl3.html>`_, we will describe how to generate
+LLVM Intermediate Representation (IR) from the AST.
+
+Full Code Listing
+=================
+
+Here is the complete code listing for this and the previous chapter.
+Note that it is fully self-contained: you don't need LLVM or any
+external libraries at all for this. (Besides the ocaml standard
+libraries, of course.) To build this, just compile with:
+
+.. code-block:: bash
+
+ # Compile
+ ocamlbuild toy.byte
+ # Run
+ ./toy.byte
+
+Here is the code:
+
+\_tags:
+ ::
+
+ <{lexer,parser}.ml>: use_camlp4, pp(camlp4of)
+
+token.ml:
+ .. code-block:: ocaml
+
+ (*===----------------------------------------------------------------------===
+ * Lexer Tokens
+ *===----------------------------------------------------------------------===*)
+
+ (* The lexer returns these 'Kwd' if it is an unknown character, otherwise one of
+ * these others for known things. *)
+ type token =
+ (* commands *)
+ | Def | Extern
+
+ (* primary *)
+ | Ident of string | Number of float
+
+ (* unknown *)
+ | Kwd of char
+
+lexer.ml:
+ .. code-block:: ocaml
+
+ (*===----------------------------------------------------------------------===
+ * Lexer
+ *===----------------------------------------------------------------------===*)
+
+ let rec lex = parser
+ (* Skip any whitespace. *)
+ | [< ' (' ' | '\n' | '\r' | '\t'); stream >] -> lex stream
+
+ (* identifier: [a-zA-Z][a-zA-Z0-9] *)
+ | [< ' ('A' .. 'Z' | 'a' .. 'z' as c); stream >] ->
+ let buffer = Buffer.create 1 in
+ Buffer.add_char buffer c;
+ lex_ident buffer stream
+
+ (* number: [0-9.]+ *)
+ | [< ' ('0' .. '9' as c); stream >] ->
+ let buffer = Buffer.create 1 in
+ Buffer.add_char buffer c;
+ lex_number buffer stream
+
+ (* Comment until end of line. *)
+ | [< ' ('#'); stream >] ->
+ lex_comment stream
+
+ (* Otherwise, just return the character as its ascii value. *)
+ | [< 'c; stream >] ->
+ [< 'Token.Kwd c; lex stream >]
+
+ (* end of stream. *)
+ | [< >] -> [< >]
+
+ and lex_number buffer = parser
+ | [< ' ('0' .. '9' | '.' as c); stream >] ->
+ Buffer.add_char buffer c;
+ lex_number buffer stream
+ | [< stream=lex >] ->
+ [< 'Token.Number (float_of_string (Buffer.contents buffer)); stream >]
+
+ and lex_ident buffer = parser
+ | [< ' ('A' .. 'Z' | 'a' .. 'z' | '0' .. '9' as c); stream >] ->
+ Buffer.add_char buffer c;
+ lex_ident buffer stream
+ | [< stream=lex >] ->
+ match Buffer.contents buffer with
+ | "def" -> [< 'Token.Def; stream >]
+ | "extern" -> [< 'Token.Extern; stream >]
+ | id -> [< 'Token.Ident id; stream >]
+
+ and lex_comment = parser
+ | [< ' ('\n'); stream=lex >] -> stream
+ | [< 'c; e=lex_comment >] -> e
+ | [< >] -> [< >]
+
+ast.ml:
+ .. code-block:: ocaml
+
+ (*===----------------------------------------------------------------------===
+ * Abstract Syntax Tree (aka Parse Tree)
+ *===----------------------------------------------------------------------===*)
+
+ (* expr - Base type for all expression nodes. *)
+ type expr =
+ (* variant for numeric literals like "1.0". *)
+ | Number of float
+
+ (* variant for referencing a variable, like "a". *)
+ | Variable of string
+
+ (* variant for a binary operator. *)
+ | Binary of char * expr * expr
+
+ (* variant for function calls. *)
+ | Call of string * expr array
+
+ (* proto - This type represents the "prototype" for a function, which captures
+ * its name, and its argument names (thus implicitly the number of arguments the
+ * function takes). *)
+ type proto = Prototype of string * string array
+
+ (* func - This type represents a function definition itself. *)
+ type func = Function of proto * expr
+
+parser.ml:
+ .. code-block:: ocaml
+
+ (*===---------------------------------------------------------------------===
+ * Parser
+ *===---------------------------------------------------------------------===*)
+
+ (* binop_precedence - This holds the precedence for each binary operator that is
+ * defined *)
+ let binop_precedence:(char, int) Hashtbl.t = Hashtbl.create 10
+
+ (* precedence - Get the precedence of the pending binary operator token. *)
+ let precedence c = try Hashtbl.find binop_precedence c with Not_found -> -1
+
+ (* primary
+ * ::= identifier
+ * ::= numberexpr
+ * ::= parenexpr *)
+ let rec parse_primary = parser
+ (* numberexpr ::= number *)
+ | [< 'Token.Number n >] -> Ast.Number n
+
+ (* parenexpr ::= '(' expression ')' *)
+ | [< 'Token.Kwd '('; e=parse_expr; 'Token.Kwd ')' ?? "expected ')'" >] -> e
+
+ (* identifierexpr
+ * ::= identifier
+ * ::= identifier '(' argumentexpr ')' *)
+ | [< 'Token.Ident id; stream >] ->
+ let rec parse_args accumulator = parser
+ | [< e=parse_expr; stream >] ->
+ begin parser
+ | [< 'Token.Kwd ','; e=parse_args (e :: accumulator) >] -> e
+ | [< >] -> e :: accumulator
+ end stream
+ | [< >] -> accumulator
+ in
+ let rec parse_ident id = parser
+ (* Call. *)
+ | [< 'Token.Kwd '(';
+ args=parse_args [];
+ 'Token.Kwd ')' ?? "expected ')'">] ->
+ Ast.Call (id, Array.of_list (List.rev args))
+
+ (* Simple variable ref. *)
+ | [< >] -> Ast.Variable id
+ in
+ parse_ident id stream
+
+ | [< >] -> raise (Stream.Error "unknown token when expecting an expression.")
+
+ (* binoprhs
+ * ::= ('+' primary)* *)
+ and parse_bin_rhs expr_prec lhs stream =
+ match Stream.peek stream with
+ (* If this is a binop, find its precedence. *)
+ | Some (Token.Kwd c) when Hashtbl.mem binop_precedence c ->
+ let token_prec = precedence c in
+
+ (* If this is a binop that binds at least as tightly as the current binop,
+ * consume it, otherwise we are done. *)
+ if token_prec < expr_prec then lhs else begin
+ (* Eat the binop. *)
+ Stream.junk stream;
+
+ (* Parse the primary expression after the binary operator. *)
+ let rhs = parse_primary stream in
+
+ (* Okay, we know this is a binop. *)
+ let rhs =
+ match Stream.peek stream with
+ | Some (Token.Kwd c2) ->
+ (* If BinOp binds less tightly with rhs than the operator after
+ * rhs, let the pending operator take rhs as its lhs. *)
+ let next_prec = precedence c2 in
+ if token_prec < next_prec
+ then parse_bin_rhs (token_prec + 1) rhs stream
+ else rhs
+ | _ -> rhs
+ in
+
+ (* Merge lhs/rhs. *)
+ let lhs = Ast.Binary (c, lhs, rhs) in
+ parse_bin_rhs expr_prec lhs stream
+ end
+ | _ -> lhs
+
+ (* expression
+ * ::= primary binoprhs *)
+ and parse_expr = parser
+ | [< lhs=parse_primary; stream >] -> parse_bin_rhs 0 lhs stream
+
+ (* prototype
+ * ::= id '(' id* ')' *)
+ let parse_prototype =
+ let rec parse_args accumulator = parser
+ | [< 'Token.Ident id; e=parse_args (id::accumulator) >] -> e
+ | [< >] -> accumulator
+ in
+
+ parser
+ | [< 'Token.Ident id;
+ 'Token.Kwd '(' ?? "expected '(' in prototype";
+ args=parse_args [];
+ 'Token.Kwd ')' ?? "expected ')' in prototype" >] ->
+ (* success. *)
+ Ast.Prototype (id, Array.of_list (List.rev args))
+
+ | [< >] ->
+ raise (Stream.Error "expected function name in prototype")
+
+ (* definition ::= 'def' prototype expression *)
+ let parse_definition = parser
+ | [< 'Token.Def; p=parse_prototype; e=parse_expr >] ->
+ Ast.Function (p, e)
+
+ (* toplevelexpr ::= expression *)
+ let parse_toplevel = parser
+ | [< e=parse_expr >] ->
+ (* Make an anonymous proto. *)
+ Ast.Function (Ast.Prototype ("", [||]), e)
+
+ (* external ::= 'extern' prototype *)
+ let parse_extern = parser
+ | [< 'Token.Extern; e=parse_prototype >] -> e
+
+toplevel.ml:
+ .. code-block:: ocaml
+
+ (*===----------------------------------------------------------------------===
+ * Top-Level parsing and JIT Driver
+ *===----------------------------------------------------------------------===*)
+
+ (* top ::= definition | external | expression | ';' *)
+ let rec main_loop stream =
+ match Stream.peek stream with
+ | None -> ()
+
+ (* ignore top-level semicolons. *)
+ | Some (Token.Kwd ';') ->
+ Stream.junk stream;
+ main_loop stream
+
+ | Some token ->
+ begin
+ try match token with
+ | Token.Def ->
+ ignore(Parser.parse_definition stream);
+ print_endline "parsed a function definition.";
+ | Token.Extern ->
+ ignore(Parser.parse_extern stream);
+ print_endline "parsed an extern.";
+ | _ ->
+ (* Evaluate a top-level expression into an anonymous function. *)
+ ignore(Parser.parse_toplevel stream);
+ print_endline "parsed a top-level expr";
+ with Stream.Error s ->
+ (* Skip token for error recovery. *)
+ Stream.junk stream;
+ print_endline s;
+ end;
+ print_string "ready> "; flush stdout;
+ main_loop stream
+
+toy.ml:
+ .. code-block:: ocaml
+
+ (*===----------------------------------------------------------------------===
+ * Main driver code.
+ *===----------------------------------------------------------------------===*)
+
+ let main () =
+ (* Install standard binary operators.
+ * 1 is the lowest precedence. *)
+ Hashtbl.add Parser.binop_precedence '<' 10;
+ Hashtbl.add Parser.binop_precedence '+' 20;
+ Hashtbl.add Parser.binop_precedence '-' 20;
+ Hashtbl.add Parser.binop_precedence '*' 40; (* highest. *)
+
+ (* Prime the first token. *)
+ print_string "ready> "; flush stdout;
+ let stream = Lexer.lex (Stream.of_channel stdin) in
+
+ (* Run the main "interpreter loop" now. *)
+ Toplevel.main_loop stream;
+ ;;
+
+ main ()
+
+`Next: Implementing Code Generation to LLVM IR <OCamlLangImpl3.html>`_
+
Added: www-releases/trunk/3.6.1/docs/_sources/tutorial/OCamlLangImpl3.txt
URL: http://llvm.org/viewvc/llvm-project/www-releases/trunk/3.6.1/docs/_sources/tutorial/OCamlLangImpl3.txt?rev=238135&view=auto
==============================================================================
--- www-releases/trunk/3.6.1/docs/_sources/tutorial/OCamlLangImpl3.txt (added)
+++ www-releases/trunk/3.6.1/docs/_sources/tutorial/OCamlLangImpl3.txt Mon May 25 08:53:02 2015
@@ -0,0 +1,961 @@
+========================================
+Kaleidoscope: Code generation to LLVM IR
+========================================
+
+.. contents::
+ :local:
+
+Chapter 3 Introduction
+======================
+
+Welcome to Chapter 3 of the "`Implementing a language with
+LLVM <index.html>`_" tutorial. This chapter shows you how to transform
+the `Abstract Syntax Tree <OCamlLangImpl2.html>`_, built in Chapter 2,
+into LLVM IR. This will teach you a little bit about how LLVM does
+things, as well as demonstrate how easy it is to use. It's much more
+work to build a lexer and parser than it is to generate LLVM IR code. :)
+
+**Please note**: the code in this chapter and later require LLVM 2.3 or
+LLVM SVN to work. LLVM 2.2 and before will not work with it.
+
+Code Generation Setup
+=====================
+
+In order to generate LLVM IR, we want some simple setup to get started.
+First we define virtual code generation (codegen) methods in each AST
+class:
+
+.. code-block:: ocaml
+
+ let rec codegen_expr = function
+ | Ast.Number n -> ...
+ | Ast.Variable name -> ...
+
+The ``Codegen.codegen_expr`` function says to emit IR for that AST node
+along with all the things it depends on, and they all return an LLVM
+Value object. "Value" is the class used to represent a "`Static Single
+Assignment
+(SSA) <http://en.wikipedia.org/wiki/Static_single_assignment_form>`_
+register" or "SSA value" in LLVM. The most distinct aspect of SSA values
+is that their value is computed as the related instruction executes, and
+it does not get a new value until (and if) the instruction re-executes.
+In other words, there is no way to "change" an SSA value. For more
+information, please read up on `Static Single
+Assignment <http://en.wikipedia.org/wiki/Static_single_assignment_form>`_
+- the concepts are really quite natural once you grok them.
+
+The second thing we want is an "Error" exception like we used for the
+parser, which will be used to report errors found during code generation
+(for example, use of an undeclared parameter):
+
+.. code-block:: ocaml
+
+ exception Error of string
+
+ let context = global_context ()
+ let the_module = create_module context "my cool jit"
+ let builder = builder context
+ let named_values:(string, llvalue) Hashtbl.t = Hashtbl.create 10
+ let double_type = double_type context
+
+The static variables will be used during code generation.
+``Codgen.the_module`` is the LLVM construct that contains all of the
+functions and global variables in a chunk of code. In many ways, it is
+the top-level structure that the LLVM IR uses to contain code.
+
+The ``Codegen.builder`` object is a helper object that makes it easy to
+generate LLVM instructions. Instances of the
+```IRBuilder`` <http://llvm.org/doxygen/IRBuilder_8h-source.html>`_
+class keep track of the current place to insert instructions and has
+methods to create new instructions.
+
+The ``Codegen.named_values`` map keeps track of which values are defined
+in the current scope and what their LLVM representation is. (In other
+words, it is a symbol table for the code). In this form of Kaleidoscope,
+the only things that can be referenced are function parameters. As such,
+function parameters will be in this map when generating code for their
+function body.
+
+With these basics in place, we can start talking about how to generate
+code for each expression. Note that this assumes that the
+``Codgen.builder`` has been set up to generate code *into* something.
+For now, we'll assume that this has already been done, and we'll just
+use it to emit code.
+
+Expression Code Generation
+==========================
+
+Generating LLVM code for expression nodes is very straightforward: less
+than 30 lines of commented code for all four of our expression nodes.
+First we'll do numeric literals:
+
+.. code-block:: ocaml
+
+ | Ast.Number n -> const_float double_type n
+
+In the LLVM IR, numeric constants are represented with the
+``ConstantFP`` class, which holds the numeric value in an ``APFloat``
+internally (``APFloat`` has the capability of holding floating point
+constants of Arbitrary Precision). This code basically just creates
+and returns a ``ConstantFP``. Note that in the LLVM IR that constants
+are all uniqued together and shared. For this reason, the API uses "the
+foo::get(..)" idiom instead of "new foo(..)" or "foo::Create(..)".
+
+.. code-block:: ocaml
+
+ | Ast.Variable name ->
+ (try Hashtbl.find named_values name with
+ | Not_found -> raise (Error "unknown variable name"))
+
+References to variables are also quite simple using LLVM. In the simple
+version of Kaleidoscope, we assume that the variable has already been
+emitted somewhere and its value is available. In practice, the only
+values that can be in the ``Codegen.named_values`` map are function
+arguments. This code simply checks to see that the specified name is in
+the map (if not, an unknown variable is being referenced) and returns
+the value for it. In future chapters, we'll add support for `loop
+induction variables <LangImpl5.html#for>`_ in the symbol table, and for
+`local variables <LangImpl7.html#localvars>`_.
+
+.. code-block:: ocaml
+
+ | Ast.Binary (op, lhs, rhs) ->
+ let lhs_val = codegen_expr lhs in
+ let rhs_val = codegen_expr rhs in
+ begin
+ match op with
+ | '+' -> build_fadd lhs_val rhs_val "addtmp" builder
+ | '-' -> build_fsub lhs_val rhs_val "subtmp" builder
+ | '*' -> build_fmul lhs_val rhs_val "multmp" builder
+ | '<' ->
+ (* Convert bool 0/1 to double 0.0 or 1.0 *)
+ let i = build_fcmp Fcmp.Ult lhs_val rhs_val "cmptmp" builder in
+ build_uitofp i double_type "booltmp" builder
+ | _ -> raise (Error "invalid binary operator")
+ end
+
+Binary operators start to get more interesting. The basic idea here is
+that we recursively emit code for the left-hand side of the expression,
+then the right-hand side, then we compute the result of the binary
+expression. In this code, we do a simple switch on the opcode to create
+the right LLVM instruction.
+
+In the example above, the LLVM builder class is starting to show its
+value. IRBuilder knows where to insert the newly created instruction,
+all you have to do is specify what instruction to create (e.g. with
+``Llvm.create_add``), which operands to use (``lhs`` and ``rhs`` here)
+and optionally provide a name for the generated instruction.
+
+One nice thing about LLVM is that the name is just a hint. For instance,
+if the code above emits multiple "addtmp" variables, LLVM will
+automatically provide each one with an increasing, unique numeric
+suffix. Local value names for instructions are purely optional, but it
+makes it much easier to read the IR dumps.
+
+`LLVM instructions <../LangRef.html#instref>`_ are constrained by strict
+rules: for example, the Left and Right operators of an `add
+instruction <../LangRef.html#i_add>`_ must have the same type, and the
+result type of the add must match the operand types. Because all values
+in Kaleidoscope are doubles, this makes for very simple code for add,
+sub and mul.
+
+On the other hand, LLVM specifies that the `fcmp
+instruction <../LangRef.html#i_fcmp>`_ always returns an 'i1' value (a
+one bit integer). The problem with this is that Kaleidoscope wants the
+value to be a 0.0 or 1.0 value. In order to get these semantics, we
+combine the fcmp instruction with a `uitofp
+instruction <../LangRef.html#i_uitofp>`_. This instruction converts its
+input integer into a floating point value by treating the input as an
+unsigned value. In contrast, if we used the `sitofp
+instruction <../LangRef.html#i_sitofp>`_, the Kaleidoscope '<' operator
+would return 0.0 and -1.0, depending on the input value.
+
+.. code-block:: ocaml
+
+ | Ast.Call (callee, args) ->
+ (* Look up the name in the module table. *)
+ let callee =
+ match lookup_function callee the_module with
+ | Some callee -> callee
+ | None -> raise (Error "unknown function referenced")
+ in
+ let params = params callee in
+
+ (* If argument mismatch error. *)
+ if Array.length params == Array.length args then () else
+ raise (Error "incorrect # arguments passed");
+ let args = Array.map codegen_expr args in
+ build_call callee args "calltmp" builder
+
+Code generation for function calls is quite straightforward with LLVM.
+The code above initially does a function name lookup in the LLVM
+Module's symbol table. Recall that the LLVM Module is the container that
+holds all of the functions we are JIT'ing. By giving each function the
+same name as what the user specifies, we can use the LLVM symbol table
+to resolve function names for us.
+
+Once we have the function to call, we recursively codegen each argument
+that is to be passed in, and create an LLVM `call
+instruction <../LangRef.html#i_call>`_. Note that LLVM uses the native C
+calling conventions by default, allowing these calls to also call into
+standard library functions like "sin" and "cos", with no additional
+effort.
+
+This wraps up our handling of the four basic expressions that we have so
+far in Kaleidoscope. Feel free to go in and add some more. For example,
+by browsing the `LLVM language reference <../LangRef.html>`_ you'll find
+several other interesting instructions that are really easy to plug into
+our basic framework.
+
+Function Code Generation
+========================
+
+Code generation for prototypes and functions must handle a number of
+details, which make their code less beautiful than expression code
+generation, but allows us to illustrate some important points. First,
+lets talk about code generation for prototypes: they are used both for
+function bodies and external function declarations. The code starts
+with:
+
+.. code-block:: ocaml
+
+ let codegen_proto = function
+ | Ast.Prototype (name, args) ->
+ (* Make the function type: double(double,double) etc. *)
+ let doubles = Array.make (Array.length args) double_type in
+ let ft = function_type double_type doubles in
+ let f =
+ match lookup_function name the_module with
+
+This code packs a lot of power into a few lines. Note first that this
+function returns a "Function\*" instead of a "Value\*" (although at the
+moment they both are modeled by ``llvalue`` in ocaml). Because a
+"prototype" really talks about the external interface for a function
+(not the value computed by an expression), it makes sense for it to
+return the LLVM Function it corresponds to when codegen'd.
+
+The call to ``Llvm.function_type`` creates the ``Llvm.llvalue`` that
+should be used for a given Prototype. Since all function arguments in
+Kaleidoscope are of type double, the first line creates a vector of "N"
+LLVM double types. It then uses the ``Llvm.function_type`` method to
+create a function type that takes "N" doubles as arguments, returns one
+double as a result, and that is not vararg (that uses the function
+``Llvm.var_arg_function_type``). Note that Types in LLVM are uniqued
+just like ``Constant``'s are, so you don't "new" a type, you "get" it.
+
+The final line above checks if the function has already been defined in
+``Codegen.the_module``. If not, we will create it.
+
+.. code-block:: ocaml
+
+ | None -> declare_function name ft the_module
+
+This indicates the type and name to use, as well as which module to
+insert into. By default we assume a function has
+``Llvm.Linkage.ExternalLinkage``. "`external
+linkage <LangRef.html#linkage>`_" means that the function may be defined
+outside the current module and/or that it is callable by functions
+outside the module. The "``name``" passed in is the name the user
+specified: this name is registered in "``Codegen.the_module``"s symbol
+table, which is used by the function call code above.
+
+In Kaleidoscope, I choose to allow redefinitions of functions in two
+cases: first, we want to allow 'extern'ing a function more than once, as
+long as the prototypes for the externs match (since all arguments have
+the same type, we just have to check that the number of arguments
+match). Second, we want to allow 'extern'ing a function and then
+defining a body for it. This is useful when defining mutually recursive
+functions.
+
+.. code-block:: ocaml
+
+ (* If 'f' conflicted, there was already something named 'name'. If it
+ * has a body, don't allow redefinition or reextern. *)
+ | Some f ->
+ (* If 'f' already has a body, reject this. *)
+ if Array.length (basic_blocks f) == 0 then () else
+ raise (Error "redefinition of function");
+
+ (* If 'f' took a different number of arguments, reject. *)
+ if Array.length (params f) == Array.length args then () else
+ raise (Error "redefinition of function with different # args");
+ f
+ in
+
+In order to verify the logic above, we first check to see if the
+pre-existing function is "empty". In this case, empty means that it has
+no basic blocks in it, which means it has no body. If it has no body, it
+is a forward declaration. Since we don't allow anything after a full
+definition of the function, the code rejects this case. If the previous
+reference to a function was an 'extern', we simply verify that the
+number of arguments for that definition and this one match up. If not,
+we emit an error.
+
+.. code-block:: ocaml
+
+ (* Set names for all arguments. *)
+ Array.iteri (fun i a ->
+ let n = args.(i) in
+ set_value_name n a;
+ Hashtbl.add named_values n a;
+ ) (params f);
+ f
+
+The last bit of code for prototypes loops over all of the arguments in
+the function, setting the name of the LLVM Argument objects to match,
+and registering the arguments in the ``Codegen.named_values`` map for
+future use by the ``Ast.Variable`` variant. Once this is set up, it
+returns the Function object to the caller. Note that we don't check for
+conflicting argument names here (e.g. "extern foo(a b a)"). Doing so
+would be very straight-forward with the mechanics we have already used
+above.
+
+.. code-block:: ocaml
+
+ let codegen_func = function
+ | Ast.Function (proto, body) ->
+ Hashtbl.clear named_values;
+ let the_function = codegen_proto proto in
+
+Code generation for function definitions starts out simply enough: we
+just codegen the prototype (Proto) and verify that it is ok. We then
+clear out the ``Codegen.named_values`` map to make sure that there isn't
+anything in it from the last function we compiled. Code generation of
+the prototype ensures that there is an LLVM Function object that is
+ready to go for us.
+
+.. code-block:: ocaml
+
+ (* Create a new basic block to start insertion into. *)
+ let bb = append_block context "entry" the_function in
+ position_at_end bb builder;
+
+ try
+ let ret_val = codegen_expr body in
+
+Now we get to the point where the ``Codegen.builder`` is set up. The
+first line creates a new `basic
+block <http://en.wikipedia.org/wiki/Basic_block>`_ (named "entry"),
+which is inserted into ``the_function``. The second line then tells the
+builder that new instructions should be inserted into the end of the new
+basic block. Basic blocks in LLVM are an important part of functions
+that define the `Control Flow
+Graph <http://en.wikipedia.org/wiki/Control_flow_graph>`_. Since we
+don't have any control flow, our functions will only contain one block
+at this point. We'll fix this in `Chapter 5 <OCamlLangImpl5.html>`_ :).
+
+.. code-block:: ocaml
+
+ let ret_val = codegen_expr body in
+
+ (* Finish off the function. *)
+ let _ = build_ret ret_val builder in
+
+ (* Validate the generated code, checking for consistency. *)
+ Llvm_analysis.assert_valid_function the_function;
+
+ the_function
+
+Once the insertion point is set up, we call the ``Codegen.codegen_func``
+method for the root expression of the function. If no error happens,
+this emits code to compute the expression into the entry block and
+returns the value that was computed. Assuming no error, we then create
+an LLVM `ret instruction <../LangRef.html#i_ret>`_, which completes the
+function. Once the function is built, we call
+``Llvm_analysis.assert_valid_function``, which is provided by LLVM. This
+function does a variety of consistency checks on the generated code, to
+determine if our compiler is doing everything right. Using this is
+important: it can catch a lot of bugs. Once the function is finished and
+validated, we return it.
+
+.. code-block:: ocaml
+
+ with e ->
+ delete_function the_function;
+ raise e
+
+The only piece left here is handling of the error case. For simplicity,
+we handle this by merely deleting the function we produced with the
+``Llvm.delete_function`` method. This allows the user to redefine a
+function that they incorrectly typed in before: if we didn't delete it,
+it would live in the symbol table, with a body, preventing future
+redefinition.
+
+This code does have a bug, though. Since the ``Codegen.codegen_proto``
+can return a previously defined forward declaration, our code can
+actually delete a forward declaration. There are a number of ways to fix
+this bug, see what you can come up with! Here is a testcase:
+
+::
+
+ extern foo(a b); # ok, defines foo.
+ def foo(a b) c; # error, 'c' is invalid.
+ def bar() foo(1, 2); # error, unknown function "foo"
+
+Driver Changes and Closing Thoughts
+===================================
+
+For now, code generation to LLVM doesn't really get us much, except that
+we can look at the pretty IR calls. The sample code inserts calls to
+Codegen into the "``Toplevel.main_loop``", and then dumps out the LLVM
+IR. This gives a nice way to look at the LLVM IR for simple functions.
+For example:
+
+::
+
+ ready> 4+5;
+ Read top-level expression:
+ define double @""() {
+ entry:
+ %addtmp = fadd double 4.000000e+00, 5.000000e+00
+ ret double %addtmp
+ }
+
+Note how the parser turns the top-level expression into anonymous
+functions for us. This will be handy when we add `JIT
+support <OCamlLangImpl4.html#jit>`_ in the next chapter. Also note that
+the code is very literally transcribed, no optimizations are being
+performed. We will `add
+optimizations <OCamlLangImpl4.html#trivialconstfold>`_ explicitly in the
+next chapter.
+
+::
+
+ ready> def foo(a b) a*a + 2*a*b + b*b;
+ Read function definition:
+ define double @foo(double %a, double %b) {
+ entry:
+ %multmp = fmul double %a, %a
+ %multmp1 = fmul double 2.000000e+00, %a
+ %multmp2 = fmul double %multmp1, %b
+ %addtmp = fadd double %multmp, %multmp2
+ %multmp3 = fmul double %b, %b
+ %addtmp4 = fadd double %addtmp, %multmp3
+ ret double %addtmp4
+ }
+
+This shows some simple arithmetic. Notice the striking similarity to the
+LLVM builder calls that we use to create the instructions.
+
+::
+
+ ready> def bar(a) foo(a, 4.0) + bar(31337);
+ Read function definition:
+ define double @bar(double %a) {
+ entry:
+ %calltmp = call double @foo(double %a, double 4.000000e+00)
+ %calltmp1 = call double @bar(double 3.133700e+04)
+ %addtmp = fadd double %calltmp, %calltmp1
+ ret double %addtmp
+ }
+
+This shows some function calls. Note that this function will take a long
+time to execute if you call it. In the future we'll add conditional
+control flow to actually make recursion useful :).
+
+::
+
+ ready> extern cos(x);
+ Read extern:
+ declare double @cos(double)
+
+ ready> cos(1.234);
+ Read top-level expression:
+ define double @""() {
+ entry:
+ %calltmp = call double @cos(double 1.234000e+00)
+ ret double %calltmp
+ }
+
+This shows an extern for the libm "cos" function, and a call to it.
+
+::
+
+ ready> ^D
+ ; ModuleID = 'my cool jit'
+
+ define double @""() {
+ entry:
+ %addtmp = fadd double 4.000000e+00, 5.000000e+00
+ ret double %addtmp
+ }
+
+ define double @foo(double %a, double %b) {
+ entry:
+ %multmp = fmul double %a, %a
+ %multmp1 = fmul double 2.000000e+00, %a
+ %multmp2 = fmul double %multmp1, %b
+ %addtmp = fadd double %multmp, %multmp2
+ %multmp3 = fmul double %b, %b
+ %addtmp4 = fadd double %addtmp, %multmp3
+ ret double %addtmp4
+ }
+
+ define double @bar(double %a) {
+ entry:
+ %calltmp = call double @foo(double %a, double 4.000000e+00)
+ %calltmp1 = call double @bar(double 3.133700e+04)
+ %addtmp = fadd double %calltmp, %calltmp1
+ ret double %addtmp
+ }
+
+ declare double @cos(double)
+
+ define double @""() {
+ entry:
+ %calltmp = call double @cos(double 1.234000e+00)
+ ret double %calltmp
+ }
+
+When you quit the current demo, it dumps out the IR for the entire
+module generated. Here you can see the big picture with all the
+functions referencing each other.
+
+This wraps up the third chapter of the Kaleidoscope tutorial. Up next,
+we'll describe how to `add JIT codegen and optimizer
+support <OCamlLangImpl4.html>`_ to this so we can actually start running
+code!
+
+Full Code Listing
+=================
+
+Here is the complete code listing for our running example, enhanced with
+the LLVM code generator. Because this uses the LLVM libraries, we need
+to link them in. To do this, we use the
+`llvm-config <http://llvm.org/cmds/llvm-config.html>`_ tool to inform
+our makefile/command line about which options to use:
+
+.. code-block:: bash
+
+ # Compile
+ ocamlbuild toy.byte
+ # Run
+ ./toy.byte
+
+Here is the code:
+
+\_tags:
+ ::
+
+ <{lexer,parser}.ml>: use_camlp4, pp(camlp4of)
+ <*.{byte,native}>: g++, use_llvm, use_llvm_analysis
+
+myocamlbuild.ml:
+ .. code-block:: ocaml
+
+ open Ocamlbuild_plugin;;
+
+ ocaml_lib ~extern:true "llvm";;
+ ocaml_lib ~extern:true "llvm_analysis";;
+
+ flag ["link"; "ocaml"; "g++"] (S[A"-cc"; A"g++"]);;
+
+token.ml:
+ .. code-block:: ocaml
+
+ (*===----------------------------------------------------------------------===
+ * Lexer Tokens
+ *===----------------------------------------------------------------------===*)
+
+ (* The lexer returns these 'Kwd' if it is an unknown character, otherwise one of
+ * these others for known things. *)
+ type token =
+ (* commands *)
+ | Def | Extern
+
+ (* primary *)
+ | Ident of string | Number of float
+
+ (* unknown *)
+ | Kwd of char
+
+lexer.ml:
+ .. code-block:: ocaml
+
+ (*===----------------------------------------------------------------------===
+ * Lexer
+ *===----------------------------------------------------------------------===*)
+
+ let rec lex = parser
+ (* Skip any whitespace. *)
+ | [< ' (' ' | '\n' | '\r' | '\t'); stream >] -> lex stream
+
+ (* identifier: [a-zA-Z][a-zA-Z0-9] *)
+ | [< ' ('A' .. 'Z' | 'a' .. 'z' as c); stream >] ->
+ let buffer = Buffer.create 1 in
+ Buffer.add_char buffer c;
+ lex_ident buffer stream
+
+ (* number: [0-9.]+ *)
+ | [< ' ('0' .. '9' as c); stream >] ->
+ let buffer = Buffer.create 1 in
+ Buffer.add_char buffer c;
+ lex_number buffer stream
+
+ (* Comment until end of line. *)
+ | [< ' ('#'); stream >] ->
+ lex_comment stream
+
+ (* Otherwise, just return the character as its ascii value. *)
+ | [< 'c; stream >] ->
+ [< 'Token.Kwd c; lex stream >]
+
+ (* end of stream. *)
+ | [< >] -> [< >]
+
+ and lex_number buffer = parser
+ | [< ' ('0' .. '9' | '.' as c); stream >] ->
+ Buffer.add_char buffer c;
+ lex_number buffer stream
+ | [< stream=lex >] ->
+ [< 'Token.Number (float_of_string (Buffer.contents buffer)); stream >]
+
+ and lex_ident buffer = parser
+ | [< ' ('A' .. 'Z' | 'a' .. 'z' | '0' .. '9' as c); stream >] ->
+ Buffer.add_char buffer c;
+ lex_ident buffer stream
+ | [< stream=lex >] ->
+ match Buffer.contents buffer with
+ | "def" -> [< 'Token.Def; stream >]
+ | "extern" -> [< 'Token.Extern; stream >]
+ | id -> [< 'Token.Ident id; stream >]
+
+ and lex_comment = parser
+ | [< ' ('\n'); stream=lex >] -> stream
+ | [< 'c; e=lex_comment >] -> e
+ | [< >] -> [< >]
+
+ast.ml:
+ .. code-block:: ocaml
+
+ (*===----------------------------------------------------------------------===
+ * Abstract Syntax Tree (aka Parse Tree)
+ *===----------------------------------------------------------------------===*)
+
+ (* expr - Base type for all expression nodes. *)
+ type expr =
+ (* variant for numeric literals like "1.0". *)
+ | Number of float
+
+ (* variant for referencing a variable, like "a". *)
+ | Variable of string
+
+ (* variant for a binary operator. *)
+ | Binary of char * expr * expr
+
+ (* variant for function calls. *)
+ | Call of string * expr array
+
+ (* proto - This type represents the "prototype" for a function, which captures
+ * its name, and its argument names (thus implicitly the number of arguments the
+ * function takes). *)
+ type proto = Prototype of string * string array
+
+ (* func - This type represents a function definition itself. *)
+ type func = Function of proto * expr
+
+parser.ml:
+ .. code-block:: ocaml
+
+ (*===---------------------------------------------------------------------===
+ * Parser
+ *===---------------------------------------------------------------------===*)
+
+ (* binop_precedence - This holds the precedence for each binary operator that is
+ * defined *)
+ let binop_precedence:(char, int) Hashtbl.t = Hashtbl.create 10
+
+ (* precedence - Get the precedence of the pending binary operator token. *)
+ let precedence c = try Hashtbl.find binop_precedence c with Not_found -> -1
+
+ (* primary
+ * ::= identifier
+ * ::= numberexpr
+ * ::= parenexpr *)
+ let rec parse_primary = parser
+ (* numberexpr ::= number *)
+ | [< 'Token.Number n >] -> Ast.Number n
+
+ (* parenexpr ::= '(' expression ')' *)
+ | [< 'Token.Kwd '('; e=parse_expr; 'Token.Kwd ')' ?? "expected ')'" >] -> e
+
+ (* identifierexpr
+ * ::= identifier
+ * ::= identifier '(' argumentexpr ')' *)
+ | [< 'Token.Ident id; stream >] ->
+ let rec parse_args accumulator = parser
+ | [< e=parse_expr; stream >] ->
+ begin parser
+ | [< 'Token.Kwd ','; e=parse_args (e :: accumulator) >] -> e
+ | [< >] -> e :: accumulator
+ end stream
+ | [< >] -> accumulator
+ in
+ let rec parse_ident id = parser
+ (* Call. *)
+ | [< 'Token.Kwd '(';
+ args=parse_args [];
+ 'Token.Kwd ')' ?? "expected ')'">] ->
+ Ast.Call (id, Array.of_list (List.rev args))
+
+ (* Simple variable ref. *)
+ | [< >] -> Ast.Variable id
+ in
+ parse_ident id stream
+
+ | [< >] -> raise (Stream.Error "unknown token when expecting an expression.")
+
+ (* binoprhs
+ * ::= ('+' primary)* *)
+ and parse_bin_rhs expr_prec lhs stream =
+ match Stream.peek stream with
+ (* If this is a binop, find its precedence. *)
+ | Some (Token.Kwd c) when Hashtbl.mem binop_precedence c ->
+ let token_prec = precedence c in
+
+ (* If this is a binop that binds at least as tightly as the current binop,
+ * consume it, otherwise we are done. *)
+ if token_prec < expr_prec then lhs else begin
+ (* Eat the binop. *)
+ Stream.junk stream;
+
+ (* Parse the primary expression after the binary operator. *)
+ let rhs = parse_primary stream in
+
+ (* Okay, we know this is a binop. *)
+ let rhs =
+ match Stream.peek stream with
+ | Some (Token.Kwd c2) ->
+ (* If BinOp binds less tightly with rhs than the operator after
+ * rhs, let the pending operator take rhs as its lhs. *)
+ let next_prec = precedence c2 in
+ if token_prec < next_prec
+ then parse_bin_rhs (token_prec + 1) rhs stream
+ else rhs
+ | _ -> rhs
+ in
+
+ (* Merge lhs/rhs. *)
+ let lhs = Ast.Binary (c, lhs, rhs) in
+ parse_bin_rhs expr_prec lhs stream
+ end
+ | _ -> lhs
+
+ (* expression
+ * ::= primary binoprhs *)
+ and parse_expr = parser
+ | [< lhs=parse_primary; stream >] -> parse_bin_rhs 0 lhs stream
+
+ (* prototype
+ * ::= id '(' id* ')' *)
+ let parse_prototype =
+ let rec parse_args accumulator = parser
+ | [< 'Token.Ident id; e=parse_args (id::accumulator) >] -> e
+ | [< >] -> accumulator
+ in
+
+ parser
+ | [< 'Token.Ident id;
+ 'Token.Kwd '(' ?? "expected '(' in prototype";
+ args=parse_args [];
+ 'Token.Kwd ')' ?? "expected ')' in prototype" >] ->
+ (* success. *)
+ Ast.Prototype (id, Array.of_list (List.rev args))
+
+ | [< >] ->
+ raise (Stream.Error "expected function name in prototype")
+
+ (* definition ::= 'def' prototype expression *)
+ let parse_definition = parser
+ | [< 'Token.Def; p=parse_prototype; e=parse_expr >] ->
+ Ast.Function (p, e)
+
+ (* toplevelexpr ::= expression *)
+ let parse_toplevel = parser
+ | [< e=parse_expr >] ->
+ (* Make an anonymous proto. *)
+ Ast.Function (Ast.Prototype ("", [||]), e)
+
+ (* external ::= 'extern' prototype *)
+ let parse_extern = parser
+ | [< 'Token.Extern; e=parse_prototype >] -> e
+
+codegen.ml:
+ .. code-block:: ocaml
+
+ (*===----------------------------------------------------------------------===
+ * Code Generation
+ *===----------------------------------------------------------------------===*)
+
+ open Llvm
+
+ exception Error of string
+
+ let context = global_context ()
+ let the_module = create_module context "my cool jit"
+ let builder = builder context
+ let named_values:(string, llvalue) Hashtbl.t = Hashtbl.create 10
+ let double_type = double_type context
+
+ let rec codegen_expr = function
+ | Ast.Number n -> const_float double_type n
+ | Ast.Variable name ->
+ (try Hashtbl.find named_values name with
+ | Not_found -> raise (Error "unknown variable name"))
+ | Ast.Binary (op, lhs, rhs) ->
+ let lhs_val = codegen_expr lhs in
+ let rhs_val = codegen_expr rhs in
+ begin
+ match op with
+ | '+' -> build_add lhs_val rhs_val "addtmp" builder
+ | '-' -> build_sub lhs_val rhs_val "subtmp" builder
+ | '*' -> build_mul lhs_val rhs_val "multmp" builder
+ | '<' ->
+ (* Convert bool 0/1 to double 0.0 or 1.0 *)
+ let i = build_fcmp Fcmp.Ult lhs_val rhs_val "cmptmp" builder in
+ build_uitofp i double_type "booltmp" builder
+ | _ -> raise (Error "invalid binary operator")
+ end
+ | Ast.Call (callee, args) ->
+ (* Look up the name in the module table. *)
+ let callee =
+ match lookup_function callee the_module with
+ | Some callee -> callee
+ | None -> raise (Error "unknown function referenced")
+ in
+ let params = params callee in
+
+ (* If argument mismatch error. *)
+ if Array.length params == Array.length args then () else
+ raise (Error "incorrect # arguments passed");
+ let args = Array.map codegen_expr args in
+ build_call callee args "calltmp" builder
+
+ let codegen_proto = function
+ | Ast.Prototype (name, args) ->
+ (* Make the function type: double(double,double) etc. *)
+ let doubles = Array.make (Array.length args) double_type in
+ let ft = function_type double_type doubles in
+ let f =
+ match lookup_function name the_module with
+ | None -> declare_function name ft the_module
+
+ (* If 'f' conflicted, there was already something named 'name'. If it
+ * has a body, don't allow redefinition or reextern. *)
+ | Some f ->
+ (* If 'f' already has a body, reject this. *)
+ if block_begin f <> At_end f then
+ raise (Error "redefinition of function");
+
+ (* If 'f' took a different number of arguments, reject. *)
+ if element_type (type_of f) <> ft then
+ raise (Error "redefinition of function with different # args");
+ f
+ in
+
+ (* Set names for all arguments. *)
+ Array.iteri (fun i a ->
+ let n = args.(i) in
+ set_value_name n a;
+ Hashtbl.add named_values n a;
+ ) (params f);
+ f
+
+ let codegen_func = function
+ | Ast.Function (proto, body) ->
+ Hashtbl.clear named_values;
+ let the_function = codegen_proto proto in
+
+ (* Create a new basic block to start insertion into. *)
+ let bb = append_block context "entry" the_function in
+ position_at_end bb builder;
+
+ try
+ let ret_val = codegen_expr body in
+
+ (* Finish off the function. *)
+ let _ = build_ret ret_val builder in
+
+ (* Validate the generated code, checking for consistency. *)
+ Llvm_analysis.assert_valid_function the_function;
+
+ the_function
+ with e ->
+ delete_function the_function;
+ raise e
+
+toplevel.ml:
+ .. code-block:: ocaml
+
+ (*===----------------------------------------------------------------------===
+ * Top-Level parsing and JIT Driver
+ *===----------------------------------------------------------------------===*)
+
+ open Llvm
+
+ (* top ::= definition | external | expression | ';' *)
+ let rec main_loop stream =
+ match Stream.peek stream with
+ | None -> ()
+
+ (* ignore top-level semicolons. *)
+ | Some (Token.Kwd ';') ->
+ Stream.junk stream;
+ main_loop stream
+
+ | Some token ->
+ begin
+ try match token with
+ | Token.Def ->
+ let e = Parser.parse_definition stream in
+ print_endline "parsed a function definition.";
+ dump_value (Codegen.codegen_func e);
+ | Token.Extern ->
+ let e = Parser.parse_extern stream in
+ print_endline "parsed an extern.";
+ dump_value (Codegen.codegen_proto e);
+ | _ ->
+ (* Evaluate a top-level expression into an anonymous function. *)
+ let e = Parser.parse_toplevel stream in
+ print_endline "parsed a top-level expr";
+ dump_value (Codegen.codegen_func e);
+ with Stream.Error s | Codegen.Error s ->
+ (* Skip token for error recovery. *)
+ Stream.junk stream;
+ print_endline s;
+ end;
+ print_string "ready> "; flush stdout;
+ main_loop stream
+
+toy.ml:
+ .. code-block:: ocaml
+
+ (*===----------------------------------------------------------------------===
+ * Main driver code.
+ *===----------------------------------------------------------------------===*)
+
+ open Llvm
+
+ let main () =
+ (* Install standard binary operators.
+ * 1 is the lowest precedence. *)
+ Hashtbl.add Parser.binop_precedence '<' 10;
+ Hashtbl.add Parser.binop_precedence '+' 20;
+ Hashtbl.add Parser.binop_precedence '-' 20;
+ Hashtbl.add Parser.binop_precedence '*' 40; (* highest. *)
+
+ (* Prime the first token. *)
+ print_string "ready> "; flush stdout;
+ let stream = Lexer.lex (Stream.of_channel stdin) in
+
+ (* Run the main "interpreter loop" now. *)
+ Toplevel.main_loop stream;
+
+ (* Print out all the generated code. *)
+ dump_module Codegen.the_module
+ ;;
+
+ main ()
+
+`Next: Adding JIT and Optimizer Support <OCamlLangImpl4.html>`_
+
More information about the llvm-commits
mailing list