[llvm] r207303 - Revert commit r207302 since build failures
Andrea Di Biagio
andrea.dibiagio at gmail.com
Fri Apr 25 19:14:44 PDT 2014
Hi Gerolf,
I think the problem was in the RUN line: you wrote 'opts' instead of 'opt'.
On Sat, Apr 26, 2014 at 3:03 AM, Gerolf Hoflehner <ghoflehner at apple.com> wrote:
> Author: ghoflehner
> Date: Fri Apr 25 21:03:17 2014
> New Revision: 207303
>
> URL: http://llvm.org/viewvc/llvm-project?rev=207303&view=rev
> Log:
> Revert commit r207302 since build failures
> have been reported.
>
> Removed:
> llvm/trunk/test/Transforms/InstSimplify/dead-code-removal.ll
> Modified:
> llvm/trunk/lib/Transforms/Scalar/LoopInstSimplify.cpp
> llvm/trunk/lib/Transforms/Utils/CloneFunction.cpp
> llvm/trunk/lib/Transforms/Utils/SimplifyInstructions.cpp
>
> Modified: llvm/trunk/lib/Transforms/Scalar/LoopInstSimplify.cpp
> URL: http://llvm.org/viewvc/llvm-project/llvm/trunk/lib/Transforms/Scalar/LoopInstSimplify.cpp?rev=207303&r1=207302&r2=207303&view=diff
> ==============================================================================
> --- llvm/trunk/lib/Transforms/Scalar/LoopInstSimplify.cpp (original)
> +++ llvm/trunk/lib/Transforms/Scalar/LoopInstSimplify.cpp Fri Apr 25 21:03:17 2014
> @@ -127,15 +127,7 @@ bool LoopInstSimplify::runOnLoop(Loop *L
> ++NumSimplified;
> }
> }
> - bool res = RecursivelyDeleteTriviallyDeadInstructions(I, TLI);
> - if (res) {
> - // RecursivelyDeleteTriviallyDeadInstruction can remove
> - // more than one instruction, so simply incrementing the
> - // iterator does not work. When instructions get deleted
> - // re-iterate instead.
> - BI = BB->begin(); BE = BB->end();
> - LocalChanged |= res;
> - }
> + LocalChanged |= RecursivelyDeleteTriviallyDeadInstructions(I, TLI);
>
> if (IsSubloopHeader && !isa<PHINode>(I))
> break;
>
> Modified: llvm/trunk/lib/Transforms/Utils/CloneFunction.cpp
> URL: http://llvm.org/viewvc/llvm-project/llvm/trunk/lib/Transforms/Utils/CloneFunction.cpp?rev=207303&r1=207302&r2=207303&view=diff
> ==============================================================================
> --- llvm/trunk/lib/Transforms/Utils/CloneFunction.cpp (original)
> +++ llvm/trunk/lib/Transforms/Utils/CloneFunction.cpp Fri Apr 25 21:03:17 2014
> @@ -32,6 +32,7 @@
> #include "llvm/Transforms/Utils/Local.h"
> #include "llvm/Transforms/Utils/ValueMapper.h"
> #include <map>
> +#include <set>
> using namespace llvm;
>
> // CloneBasicBlock - See comments in Cloning.h
> @@ -272,42 +273,28 @@ namespace {
> NameSuffix(nameSuffix), CodeInfo(codeInfo), DL(DL) {
> }
>
> - /// CloneBlock - The specified block is found to be reachable, clone it and
> - /// anything that it can reach.
> + /// CloneBlock - The specified block is found to be reachable, so clone it
> + /// into newBB.
> void CloneBlock(const BasicBlock *BB,
> - std::vector<const BasicBlock*> &ToClone);
> + BasicBlock *NewBB,
> + std::vector<const BasicBlock *> &ToClone,
> + std::set<const BasicBlock *> &OrigBBs);
> };
> }
>
> -/// CloneBlock - The specified block is found to be reachable, clone it and
> -/// anything that it can reach.
> +/// CloneBlock - The specified block is found to be reachable, so clone it
> +/// into newBB.
> void PruningFunctionCloner::CloneBlock(const BasicBlock *BB,
> - std::vector<const BasicBlock*> &ToClone){
> - WeakVH &BBEntry = VMap[BB];
> -
> - // Have we already cloned this block?
> - if (BBEntry) return;
> + BasicBlock *NewBB,
> + std::vector<const BasicBlock *> &ToClone,
> + std::set<const BasicBlock *> &OrigBBs) {
>
> - // Nope, clone it now.
> - BasicBlock *NewBB;
> - BBEntry = NewBB = BasicBlock::Create(BB->getContext());
> - if (BB->hasName()) NewBB->setName(BB->getName()+NameSuffix);
> + // Remove BB from list of blocks to clone.
> + // When it was not in the list, it has been cloned already, so
> + // don't clone again.
> + if (!OrigBBs.erase(BB)) return;
>
> - // It is only legal to clone a function if a block address within that
> - // function is never referenced outside of the function. Given that, we
> - // want to map block addresses from the old function to block addresses in
> - // the clone. (This is different from the generic ValueMapper
> - // implementation, which generates an invalid blockaddress when
> - // cloning a function.)
> - //
> - // Note that we don't need to fix the mapping for unreachable blocks;
> - // the default mapping there is safe.
> - if (BB->hasAddressTaken()) {
> - Constant *OldBBAddr = BlockAddress::get(const_cast<Function*>(OldFunc),
> - const_cast<BasicBlock*>(BB));
> - VMap[OldBBAddr] = BlockAddress::get(NewFunc, NewBB);
> - }
> -
> + // Nope, clone it now.
>
> bool hasCalls = false, hasDynamicAllocas = false, hasStaticAllocas = false;
>
> @@ -425,7 +412,7 @@ void llvm::CloneAndPruneFunctionInto(Fun
> const DataLayout *DL,
> Instruction *TheCall) {
> assert(NameSuffix && "NameSuffix cannot be null!");
> -
> +
> #ifndef NDEBUG
> for (Function::const_arg_iterator II = OldFunc->arg_begin(),
> E = OldFunc->arg_end(); II != E; ++II)
> @@ -435,15 +422,87 @@ void llvm::CloneAndPruneFunctionInto(Fun
> PruningFunctionCloner PFC(NewFunc, OldFunc, VMap, ModuleLevelChanges,
> NameSuffix, CodeInfo, DL);
>
> - // Clone the entry block, and anything recursively reachable from it.
> + // Since all BB address references need to be known before block-by-block
> + // processing, we need to create all reachable blocks before processing
> + // them for instruction cloning and pruning. Some of these blocks may
> + // be removed due to later pruning.
> std::vector<const BasicBlock*> CloneWorklist;
> + //
> + // OrigBBs consists of all blocks reachable from the entry
> + // block.
> + // This list will be pruned down by the CloneFunction() currently
> + // (March 2014) due to two optimizations:
> + // First, when a conditional branch target is known at compile-time,
> + // only the actual branch destination block needs to be cloned.
> + // Second, when a switch statement target is known at compile-time,
> + // only the actual case statement needs to be cloned.
> + std::set<const BasicBlock*> OrigBBs;
> +
> + CloneWorklist.push_back(&OldFunc->getEntryBlock());
> + while (!CloneWorklist.empty()) {
> + const BasicBlock *BB = CloneWorklist.back();
> + CloneWorklist.pop_back();
> +
> + // Don't revisit blocks.
> + if (VMap.count(BB))
> + continue;
> +
> + BasicBlock *NewBB = BasicBlock::Create(BB->getContext());
> + if (BB->hasName()) NewBB->setName(BB->getName()+NameSuffix);
> +
> + // It is only legal to clone a function if a block address within that
> + // function is never referenced outside of the function. Given that, we
> + // want to map block addresses from the old function to block addresses in
> + // the clone. (This is different from the generic ValueMapper
> + // implementation, which generates an invalid blockaddress when
> + // cloning a function.)
> + //
> + // Note that we don't need to fix the mapping for unreachable blocks;
> + // the default mapping there is safe.
> + if (BB->hasAddressTaken()) {
> + Constant *OldBBAddr = BlockAddress::get(const_cast<Function*>(OldFunc),
> + const_cast<BasicBlock*>(BB));
> + VMap[OldBBAddr] = BlockAddress::get(NewFunc, NewBB);
> + }
> +
> + OrigBBs.insert(BB);
> + VMap[BB] = NewBB;
> + // Iterate over all possible successors and add them to the CloneWorklist.
> + const TerminatorInst *Term = BB->getTerminator();
> + for (unsigned i = 0, e = Term->getNumSuccessors(); i != e; ++i) {
> + BasicBlock *Succ = Term->getSuccessor(i);
> + CloneWorklist.push_back(Succ);
> + }
> + }
> +
> + // Now, fill only the reachable blocks with the cloned contents
> + // of the originals.
> + assert(CloneWorklist.empty() && "Dirty worklist before re-use\n");
> CloneWorklist.push_back(&OldFunc->getEntryBlock());
> while (!CloneWorklist.empty()) {
> const BasicBlock *BB = CloneWorklist.back();
> CloneWorklist.pop_back();
> - PFC.CloneBlock(BB, CloneWorklist);
> + PFC.CloneBlock(BB, cast<BasicBlock>(VMap[BB]), CloneWorklist,
> + OrigBBs);
> }
> -
> +
> + // Removed BB's that were created that turned out to be prunable.
> + // Actual cloning may have found pruning opportunities since
> + // branch or switch statement target may have been known at compile-time.
> + // Alternatively we could write a routine CloneFunction and add a) a
> + // parameter to actually do the cloning and b) a return parameter that
> + // gives a list of blocks that need to be cloned also. Then we could
> + // call CloneFunction when we collect the blocks to call, but suppress
> + // cloning. And actually *do* the cloning in the while loop above. Also
> + // the cleanup here would become redundant, and so would be the OrigBBs.
> + for (std::set<const BasicBlock *>::iterator Oi = OrigBBs.begin(),
> + Oe = OrigBBs.end(); Oi != Oe; ++Oi) {
> + const BasicBlock *Orig = *Oi;
> + BasicBlock *NewBB = cast<BasicBlock>(VMap[Orig]);
> + delete NewBB;
> + VMap[Orig] = 0;
> + }
> +
> // Loop over all of the basic blocks in the old function. If the block was
> // reachable, we have cloned it and the old block is now in the value map:
> // insert it into the new function in the right order. If not, ignore it.
>
> Modified: llvm/trunk/lib/Transforms/Utils/SimplifyInstructions.cpp
> URL: http://llvm.org/viewvc/llvm-project/llvm/trunk/lib/Transforms/Utils/SimplifyInstructions.cpp?rev=207303&r1=207302&r2=207303&view=diff
> ==============================================================================
> --- llvm/trunk/lib/Transforms/Utils/SimplifyInstructions.cpp (original)
> +++ llvm/trunk/lib/Transforms/Utils/SimplifyInstructions.cpp Fri Apr 25 21:03:17 2014
> @@ -76,15 +76,7 @@ namespace {
> ++NumSimplified;
> Changed = true;
> }
> - bool res = RecursivelyDeleteTriviallyDeadInstructions(I, TLI);
> - if (res) {
> - // RecursivelyDeleteTriviallyDeadInstruction can remove
> - // more than one instruction, so simply incrementing the
> - // iterator does not work. When instructions get deleted
> - // re-iterate instead.
> - BI = BB->begin(); BE = BB->end();
> - Changed |= res;
> - }
> + Changed |= RecursivelyDeleteTriviallyDeadInstructions(I, TLI);
> }
>
> // Place the list of instructions to simplify on the next loop iteration
>
> Removed: llvm/trunk/test/Transforms/InstSimplify/dead-code-removal.ll
> URL: http://llvm.org/viewvc/llvm-project/llvm/trunk/test/Transforms/InstSimplify/dead-code-removal.ll?rev=207302&view=auto
> ==============================================================================
> --- llvm/trunk/test/Transforms/InstSimplify/dead-code-removal.ll (original)
> +++ llvm/trunk/test/Transforms/InstSimplify/dead-code-removal.ll (removed)
> @@ -1,15 +0,0 @@
> -; RUN: opts -instsimplify -S < %s | FileCheck %s
> -
> -define void @foo() nounwind {
> - br i1 undef, label %1, label %4
> -
> -; <label>:1 ; preds = %1, %0
> -; CHECK-NOT: phi
> -; CHECK-NOT: sub
> - %2 = phi i32 [ %3, %1 ], [ undef, %0 ]
> - %3 = sub i32 0, undef
> - br label %1
> -
> -; <label>:4 ; preds = %0
> - ret void
> -}
>
>
> _______________________________________________
> llvm-commits mailing list
> llvm-commits at cs.uiuc.edu
> http://lists.cs.uiuc.edu/mailman/listinfo/llvm-commits
More information about the llvm-commits
mailing list