[llvm] r206622 - Reapply "blockfreq: Rewrite BlockFrequencyInfoImpl"
Duncan P. N. Exon Smith
dexonsmith at apple.com
Fri Apr 18 10:22:26 PDT 2014
Author: dexonsmith
Date: Fri Apr 18 12:22:25 2014
New Revision: 206622
URL: http://llvm.org/viewvc/llvm-project?rev=206622&view=rev
Log:
Reapply "blockfreq: Rewrite BlockFrequencyInfoImpl"
This reverts commit r206556, effectively reapplying commit r206548 and
its fixups in r206549 and r206550.
In an intervening commit I've added target triples to the tests that
were failing remotely [1] (but passing locally). I'm hoping the mystery
is solved? I'll revert this again if the tests are still failing
remotely.
[1]: http://bb.pgr.jp/builders/ninja-x64-msvc-RA-centos6/builds/1816
Added:
llvm/trunk/lib/Analysis/BlockFrequencyInfoImpl.cpp
llvm/trunk/test/Analysis/BlockFrequencyInfo/bad_input.ll
llvm/trunk/test/Analysis/BlockFrequencyInfo/double_exit.ll
llvm/trunk/test/Analysis/BlockFrequencyInfo/irreducible.ll
llvm/trunk/test/Analysis/BlockFrequencyInfo/loop_with_branch.ll
llvm/trunk/test/Analysis/BlockFrequencyInfo/nested_loop_with_branches.ll
Modified:
llvm/trunk/include/llvm/Analysis/BlockFrequencyInfoImpl.h
llvm/trunk/lib/Analysis/BlockFrequencyInfo.cpp
llvm/trunk/lib/Analysis/CMakeLists.txt
llvm/trunk/lib/CodeGen/MachineBlockFrequencyInfo.cpp
llvm/trunk/test/Analysis/BlockFrequencyInfo/basic.ll
llvm/trunk/test/CodeGen/XCore/llvm-intrinsics.ll
Modified: llvm/trunk/include/llvm/Analysis/BlockFrequencyInfoImpl.h
URL: http://llvm.org/viewvc/llvm-project/llvm/trunk/include/llvm/Analysis/BlockFrequencyInfoImpl.h?rev=206622&r1=206621&r2=206622&view=diff
==============================================================================
--- llvm/trunk/include/llvm/Analysis/BlockFrequencyInfoImpl.h (original)
+++ llvm/trunk/include/llvm/Analysis/BlockFrequencyInfoImpl.h Fri Apr 18 12:22:25 2014
@@ -7,7 +7,7 @@
//
//===----------------------------------------------------------------------===//
//
-// Shared implementation of BlockFrequencyInfo for IR and Machine Instructions.
+// Shared implementation of BlockFrequency for IR and Machine Instructions.
//
//===----------------------------------------------------------------------===//
@@ -16,8 +16,6 @@
#include "llvm/ADT/DenseMap.h"
#include "llvm/ADT/PostOrderIterator.h"
-#include "llvm/CodeGen/MachineBasicBlock.h"
-#include "llvm/CodeGen/MachineFunction.h"
#include "llvm/IR/BasicBlock.h"
#include "llvm/Support/BlockFrequency.h"
#include "llvm/Support/BranchProbability.h"
@@ -26,374 +24,1699 @@
#include <string>
#include <vector>
+//===----------------------------------------------------------------------===//
+//
+// PositiveFloat definition.
+//
+// TODO: Make this private to BlockFrequencyInfoImpl or delete.
+//
+//===----------------------------------------------------------------------===//
namespace llvm {
+class PositiveFloatBase {
+public:
+ static const int MaxExponent = 16383;
+ static const int MinExponent = -16382;
+ static const int DefaultPrecision = 10;
+
+ static void dump(uint64_t D, int16_t E, int Width);
+ static raw_ostream &print(raw_ostream &OS, uint64_t D, int16_t E, int Width,
+ unsigned Precision);
+ static std::string toString(uint64_t D, int16_t E, int Width,
+ unsigned Precision);
+ static int countLeadingZeros32(uint32_t N) { return countLeadingZeros(N); }
+ static int countLeadingZeros64(uint64_t N) { return countLeadingZeros(N); }
+ static uint64_t getHalf(uint64_t N) { return (N >> 1) + (N & 1); }
+
+ static std::pair<uint64_t, bool> splitSigned(int64_t N) {
+ if (N >= 0)
+ return std::make_pair(N, false);
+ if (N == INT64_MIN)
+ return std::make_pair(uint64_t(N) + 1, true);
+ return std::make_pair(-N, true);
+ }
+ static int64_t joinSigned(uint64_t U, bool IsNeg) {
+ if (U > INT64_MAX)
+ return IsNeg ? INT64_MIN : INT64_MAX;
+ return IsNeg ? -int16_t(U) : U;
+ }
-class BranchProbabilityInfo;
-class BlockFrequencyInfo;
-class MachineBranchProbabilityInfo;
-class MachineBlockFrequencyInfo;
+ static int32_t extractLg(const std::pair<int32_t, int> &Lg) {
+ return Lg.first;
+ }
+ static int32_t extractLgFloor(const std::pair<int32_t, int> &Lg) {
+ return Lg.first - (Lg.second > 0);
+ }
+ static int32_t extractLgCeiling(const std::pair<int32_t, int> &Lg) {
+ return Lg.first + (Lg.second < 0);
+ }
+ static uint64_t getDiff(int16_t L, int16_t R) {
+ assert(L <= R && "arguments in wrong order");
+ return (uint64_t)R - (uint64_t)L;
+ }
-namespace bfi_detail {
-template <class BlockT> struct TypeMap {};
-template <> struct TypeMap<BasicBlock> {
- typedef BasicBlock BlockT;
- typedef Function FunctionT;
- typedef BranchProbabilityInfo BranchProbabilityInfoT;
-};
-template <> struct TypeMap<MachineBasicBlock> {
- typedef MachineBasicBlock BlockT;
- typedef MachineFunction FunctionT;
- typedef MachineBranchProbabilityInfo BranchProbabilityInfoT;
+ static std::pair<uint64_t, int16_t> divide64(uint64_t L, uint64_t R);
+ static std::pair<uint64_t, int16_t> multiply64(uint64_t L, uint64_t R);
+
+ static int compare(uint64_t L, uint64_t R, int Shift) {
+ assert(Shift >= 0);
+ assert(Shift < 64);
+
+ uint64_t L_adjusted = L >> Shift;
+ if (L_adjusted < R)
+ return -1;
+ if (L_adjusted > R)
+ return 1;
+
+ return L > L_adjusted << Shift ? 1 : 0;
+ }
};
-}
-/// BlockFrequencyInfoImpl implements block frequency algorithm for IR and
-/// Machine Instructions. Algorithm starts with value ENTRY_FREQ
-/// for the entry block and then propagates frequencies using branch weights
-/// from (Machine)BranchProbabilityInfo. LoopInfo is not required because
-/// algorithm can find "backedges" by itself.
-template <class BT>
-class BlockFrequencyInfoImpl {
- typedef typename bfi_detail::TypeMap<BT>::BlockT BlockT;
- typedef typename bfi_detail::TypeMap<BT>::FunctionT FunctionT;
- typedef typename bfi_detail::TypeMap<BT>::BranchProbabilityInfoT
- BranchProbabilityInfoT;
+/// \brief Simple representation of a positive floating point.
+///
+/// PositiveFloat is a positive floating point number. It uses simple
+/// saturation arithmetic, and every operation is well-defined for every value.
+///
+/// The number is split into a signed exponent and unsigned digits. The number
+/// represented is \c getDigits()*2^getExponent(). In this way, the digits are
+/// much like the mantissa in the x87 long double, but there is no canonical
+/// form, so the same number can be represented by many bit representations
+/// (it's always in "denormal" mode).
+///
+/// PositiveFloat is templated on the underlying integer type for digits, which
+/// is expected to be one of uint64_t, uint32_t, uint16_t or uint8_t.
+///
+/// Unlike builtin floating point types, PositiveFloat is portable.
+///
+/// Unlike APFloat, PositiveFloat does not model architecture floating point
+/// behaviour (this should make it a little faster), and implements most
+/// operators (this makes it usable).
+///
+/// PositiveFloat is totally ordered. However, there is no canonical form, so
+/// there are multiple representations of most scalars. E.g.:
+///
+/// PositiveFloat(8u, 0) == PositiveFloat(4u, 1)
+/// PositiveFloat(4u, 1) == PositiveFloat(2u, 2)
+/// PositiveFloat(2u, 2) == PositiveFloat(1u, 3)
+///
+/// PositiveFloat implements most arithmetic operations. Precision is kept
+/// where possible. Uses simple saturation arithmetic, so that operations
+/// saturate to 0.0 or getLargest() rather than under or overflowing. It has
+/// some extra arithmetic for unit inversion. 0.0/0.0 is defined to be 0.0.
+/// Any other division by 0.0 is defined to be getLargest().
+///
+/// As a convenience for modifying the exponent, left and right shifting are
+/// both implemented, and both interpret negative shifts as positive shifts in
+/// the opposite direction.
+///
+/// Future work might extract most of the implementation into a base class
+/// (e.g., \c Float) that has an \c IsSigned template parameter. The initial
+/// use case for this only needed positive semantics, but it wouldn't take much
+/// work to extend.
+///
+/// Exponents are limited to the range accepted by x87 long double. This makes
+/// it trivial to add functionality to convert to APFloat (this is already
+/// relied on for the implementation of printing).
+template <class DigitsT> class PositiveFloat : PositiveFloatBase {
+public:
+ static_assert(!std::numeric_limits<DigitsT>::is_signed,
+ "only unsigned floats supported");
- DenseMap<const BlockT *, BlockFrequency> Freqs;
+ typedef DigitsT DigitsType;
- BranchProbabilityInfoT *BPI;
+private:
+ typedef std::numeric_limits<DigitsType> DigitsLimits;
- FunctionT *Fn;
+ static const int Width = sizeof(DigitsType) * 8;
+ static_assert(Width <= 64, "invalid integer width for digits");
- typedef GraphTraits< Inverse<BlockT *> > GT;
+private:
+ DigitsType Digits;
+ int16_t Exponent;
- static const uint64_t EntryFreq = 1 << 14;
+public:
+ PositiveFloat() : Digits(0), Exponent(0) {}
- std::string getBlockName(BasicBlock *BB) const {
- return BB->getName().str();
+ PositiveFloat(DigitsType Digits, int16_t Exponent)
+ : Digits(Digits), Exponent(Exponent) {}
+
+private:
+ PositiveFloat(const std::pair<uint64_t, int16_t> &X)
+ : Digits(X.first), Exponent(X.second) {}
+
+public:
+ static PositiveFloat getZero() { return PositiveFloat(0, 0); }
+ static PositiveFloat getOne() { return PositiveFloat(1, 0); }
+ static PositiveFloat getLargest() {
+ return PositiveFloat(DigitsLimits::max(), MaxExponent);
+ }
+ static PositiveFloat getFloat(uint64_t N) { return adjustToWidth(N, 0); }
+ static PositiveFloat getInverseFloat(uint64_t N) {
+ return getFloat(N).invert();
+ }
+ static PositiveFloat getFraction(DigitsType N, DigitsType D) {
+ return getQuotient(N, D);
}
- std::string getBlockName(MachineBasicBlock *MBB) const {
- std::string str;
- raw_string_ostream ss(str);
- ss << "BB#" << MBB->getNumber();
+ int16_t getExponent() const { return Exponent; }
+ DigitsType getDigits() const { return Digits; }
- if (const BasicBlock *BB = MBB->getBasicBlock())
- ss << " derived from LLVM BB " << BB->getName();
+ template <class IntT> IntT toInt() const;
- return ss.str();
+ bool isZero() const { return !Digits; }
+ bool isLargest() const { return *this == getLargest(); }
+ bool isOne() const {
+ if (Exponent > 0 || Exponent <= -Width)
+ return false;
+ return Digits == DigitsType(1) << -Exponent;
}
- void setBlockFreq(BlockT *BB, BlockFrequency Freq) {
- Freqs[BB] = Freq;
- DEBUG(dbgs() << "Frequency(" << getBlockName(BB) << ") = ";
- printBlockFreq(dbgs(), Freq) << "\n");
+ /// \brief The log base 2, rounded.
+ ///
+ /// Get the lg of the scalar. lg 0 is defined to be INT32_MIN.
+ int32_t lg() const { return extractLg(lgImpl()); }
+
+ /// \brief The log base 2, rounded towards INT32_MIN.
+ ///
+ /// Get the lg floor. lg 0 is defined to be INT32_MIN.
+ int32_t lgFloor() const { return extractLgFloor(lgImpl()); }
+
+ /// \brief The log base 2, rounded towards INT32_MAX.
+ ///
+ /// Get the lg ceiling. lg 0 is defined to be INT32_MIN.
+ int32_t lgCeiling() const { return extractLgCeiling(lgImpl()); }
+
+ bool operator==(const PositiveFloat &X) const { return compare(X) == 0; }
+ bool operator<(const PositiveFloat &X) const { return compare(X) < 0; }
+ bool operator!=(const PositiveFloat &X) const { return compare(X) != 0; }
+ bool operator>(const PositiveFloat &X) const { return compare(X) > 0; }
+ bool operator<=(const PositiveFloat &X) const { return compare(X) <= 0; }
+ bool operator>=(const PositiveFloat &X) const { return compare(X) >= 0; }
+
+ bool operator!() const { return isZero(); }
+
+ /// \brief Convert to a decimal representation in a string.
+ ///
+ /// Convert to a string. Uses scientific notation for very large/small
+ /// numbers. Scientific notation is used roughly for numbers outside of the
+ /// range 2^-64 through 2^64.
+ ///
+ /// \c Precision indicates the number of decimal digits of precision to use;
+ /// 0 requests the maximum available.
+ ///
+ /// As a special case to make debugging easier, if the number is small enough
+ /// to convert without scientific notation and has more than \c Precision
+ /// digits before the decimal place, it's printed accurately to the first
+ /// digit past zero. E.g., assuming 10 digits of precision:
+ ///
+ /// 98765432198.7654... => 98765432198.8
+ /// 8765432198.7654... => 8765432198.8
+ /// 765432198.7654... => 765432198.8
+ /// 65432198.7654... => 65432198.77
+ /// 5432198.7654... => 5432198.765
+ std::string toString(unsigned Precision = DefaultPrecision) {
+ return PositiveFloatBase::toString(Digits, Exponent, Width, Precision);
}
- /// getEdgeFreq - Return edge frequency based on SRC frequency and Src -> Dst
- /// edge probability.
- BlockFrequency getEdgeFreq(BlockT *Src, BlockT *Dst) const {
- BranchProbability Prob = BPI->getEdgeProbability(Src, Dst);
- return getBlockFreq(Src) * Prob;
+ /// \brief Print a decimal representation.
+ ///
+ /// Print a string. See toString for documentation.
+ raw_ostream &print(raw_ostream &OS,
+ unsigned Precision = DefaultPrecision) const {
+ return PositiveFloatBase::print(OS, Digits, Exponent, Width, Precision);
}
+ void dump() const { return PositiveFloatBase::dump(Digits, Exponent, Width); }
+
+ PositiveFloat &operator+=(const PositiveFloat &X);
+ PositiveFloat &operator-=(const PositiveFloat &X);
+ PositiveFloat &operator*=(const PositiveFloat &X);
+ PositiveFloat &operator/=(const PositiveFloat &X);
+ PositiveFloat &operator<<=(int16_t Shift) { return shiftLeft(Shift); }
+ PositiveFloat &operator>>=(int16_t Shift) { return shiftRight(Shift); }
+
+private:
+ PositiveFloat &shiftLeft(int32_t Shift);
+ PositiveFloat &shiftRight(int32_t Shift);
+ PositiveFloat normalizeExponents(PositiveFloat X);
- /// incBlockFreq - Increase BB block frequency by FREQ.
+public:
+ /// \brief Scale a large number accurately.
///
- void incBlockFreq(BlockT *BB, BlockFrequency Freq) {
- Freqs[BB] += Freq;
- DEBUG(dbgs() << "Frequency(" << getBlockName(BB) << ") += ";
- printBlockFreq(dbgs(), Freq) << " --> ";
- printBlockFreq(dbgs(), Freqs[BB]) << "\n");
+ /// Scale N (multiply it by this). Uses full precision multiplication, even
+ /// if Width is smaller than 64, so information is not lost.
+ uint64_t scale(uint64_t N) const;
+ uint64_t scaleByInverse(uint64_t N) const {
+ // TODO: implement directly, rather than relying on inverse. Inverse is
+ // expensive.
+ return inverse().scale(N);
+ }
+ int64_t scale(int64_t N) const {
+ std::pair<uint64_t, bool> Unsigned = splitSigned(N);
+ return joinSigned(scale(Unsigned.first), Unsigned.second);
+ }
+ int64_t scaleByInverse(int64_t N) const {
+ std::pair<uint64_t, bool> Unsigned = splitSigned(N);
+ return joinSigned(scaleByInverse(Unsigned.first), Unsigned.second);
+ }
+
+ int compare(const PositiveFloat &X) const;
+ int compareTo(uint64_t N) const {
+ PositiveFloat Float = getFloat(N);
+ int Compare = compare(Float);
+ if (Width == 64 || Compare != 0)
+ return Compare;
+
+ // Check for precision loss. We know *this == RoundTrip.
+ uint64_t RoundTrip = Float.template toInt<uint64_t>();
+ return N == RoundTrip ? 0 : RoundTrip < N ? -1 : 1;
+ }
+ int compareTo(int64_t N) const { return N < 0 ? 1 : compareTo(uint64_t(N)); }
+
+ PositiveFloat &invert() { return *this = PositiveFloat::getFloat(1) / *this; }
+ PositiveFloat inverse() const { return PositiveFloat(*this).invert(); }
+
+private:
+ static PositiveFloat getProduct(DigitsType L, DigitsType R);
+ static PositiveFloat getQuotient(DigitsType Dividend, DigitsType Divisor);
+
+ std::pair<int32_t, int> lgImpl() const;
+ static int countLeadingZerosWidth(DigitsType Digits) {
+ if (Width == 64)
+ return countLeadingZeros64(Digits);
+ if (Width == 32)
+ return countLeadingZeros32(Digits);
+ return countLeadingZeros32(Digits) + Width - 32;
+ }
+
+ static PositiveFloat adjustToWidth(uint64_t N, int S) {
+ assert(S >= MinExponent);
+ assert(S <= MaxExponent);
+ if (Width == 64 || N <= DigitsLimits::max())
+ return PositiveFloat(N, S);
+
+ // Shift right.
+ int Shift = 64 - Width - countLeadingZeros64(N);
+ DigitsType Shifted = N >> Shift;
+
+ // Round.
+ assert(S + Shift <= MaxExponent);
+ return getRounded(PositiveFloat(Shifted, S + Shift),
+ N & UINT64_C(1) << (Shift - 1));
+ }
+
+ static PositiveFloat getRounded(PositiveFloat P, bool Round) {
+ if (!Round)
+ return P;
+ if (P.Digits == DigitsLimits::max())
+ // Careful of overflow in the exponent.
+ return PositiveFloat(1, P.Exponent) <<= Width;
+ return PositiveFloat(P.Digits + 1, P.Exponent);
+ }
+};
+
+template <class DigitsT>
+PositiveFloat<DigitsT> operator+(const PositiveFloat<DigitsT> &L,
+ const PositiveFloat<DigitsT> &R) {
+ return PositiveFloat<DigitsT>(L) += R;
+}
+template <class DigitsT>
+PositiveFloat<DigitsT> operator-(const PositiveFloat<DigitsT> &L,
+ const PositiveFloat<DigitsT> &R) {
+ return PositiveFloat<DigitsT>(L) -= R;
+}
+template <class DigitsT>
+PositiveFloat<DigitsT> operator*(const PositiveFloat<DigitsT> &L,
+ const PositiveFloat<DigitsT> &R) {
+ return PositiveFloat<DigitsT>(L) *= R;
+}
+template <class DigitsT>
+PositiveFloat<DigitsT> operator/(const PositiveFloat<DigitsT> &L,
+ const PositiveFloat<DigitsT> &R) {
+ return PositiveFloat<DigitsT>(L) /= R;
+}
+template <class DigitsT>
+PositiveFloat<DigitsT> operator<<(const PositiveFloat<DigitsT> &F,
+ int16_t Shift) {
+ return PositiveFloat<DigitsT>(F) <<= Shift;
+}
+template <class DigitsT>
+PositiveFloat<DigitsT> operator>>(const PositiveFloat<DigitsT> &F,
+ int16_t Shift) {
+ return PositiveFloat<DigitsT>(F) >>= Shift;
+}
+
+template <class DigitsT>
+raw_ostream &operator<<(raw_ostream &OS, const PositiveFloat<DigitsT> &X) {
+ return X.print(OS, 10);
+}
+
+template <class DigitsT>
+bool operator<(const PositiveFloat<DigitsT> &L, uint64_t R) {
+ return L.compareTo(R) < 0;
+}
+template <class DigitsT>
+bool operator>(const PositiveFloat<DigitsT> &L, uint64_t R) {
+ return L.compareTo(R) > 0;
+}
+template <class DigitsT>
+bool operator==(const PositiveFloat<DigitsT> &L, uint64_t R) {
+ return L.compareTo(R) == 0;
+}
+template <class DigitsT>
+bool operator!=(const PositiveFloat<DigitsT> &L, uint64_t R) {
+ return L.compareTo(R) != 0;
+}
+template <class DigitsT>
+bool operator<=(const PositiveFloat<DigitsT> &L, uint64_t R) {
+ return L.compareTo(R) <= 0;
+}
+template <class DigitsT>
+bool operator>=(const PositiveFloat<DigitsT> &L, uint64_t R) {
+ return L.compareTo(R) >= 0;
+}
+
+template <class DigitsT>
+bool operator<(const PositiveFloat<DigitsT> &L, int64_t R) {
+ return L.compareTo(R) < 0;
+}
+template <class DigitsT>
+bool operator>(const PositiveFloat<DigitsT> &L, int64_t R) {
+ return L.compareTo(R) > 0;
+}
+template <class DigitsT>
+bool operator==(const PositiveFloat<DigitsT> &L, int64_t R) {
+ return L.compareTo(R) == 0;
+}
+template <class DigitsT>
+bool operator!=(const PositiveFloat<DigitsT> &L, int64_t R) {
+ return L.compareTo(R) != 0;
+}
+template <class DigitsT>
+bool operator<=(const PositiveFloat<DigitsT> &L, int64_t R) {
+ return L.compareTo(R) <= 0;
+}
+template <class DigitsT>
+bool operator>=(const PositiveFloat<DigitsT> &L, int64_t R) {
+ return L.compareTo(R) >= 0;
+}
+
+template <class DigitsT>
+bool operator<(const PositiveFloat<DigitsT> &L, uint32_t R) {
+ return L.compareTo(uint64_t(R)) < 0;
+}
+template <class DigitsT>
+bool operator>(const PositiveFloat<DigitsT> &L, uint32_t R) {
+ return L.compareTo(uint64_t(R)) > 0;
+}
+template <class DigitsT>
+bool operator==(const PositiveFloat<DigitsT> &L, uint32_t R) {
+ return L.compareTo(uint64_t(R)) == 0;
+}
+template <class DigitsT>
+bool operator!=(const PositiveFloat<DigitsT> &L, uint32_t R) {
+ return L.compareTo(uint64_t(R)) != 0;
+}
+template <class DigitsT>
+bool operator<=(const PositiveFloat<DigitsT> &L, uint32_t R) {
+ return L.compareTo(uint64_t(R)) <= 0;
+}
+template <class DigitsT>
+bool operator>=(const PositiveFloat<DigitsT> &L, uint32_t R) {
+ return L.compareTo(uint64_t(R)) >= 0;
+}
+
+template <class DigitsT>
+bool operator<(const PositiveFloat<DigitsT> &L, int32_t R) {
+ return L.compareTo(int64_t(R)) < 0;
+}
+template <class DigitsT>
+bool operator>(const PositiveFloat<DigitsT> &L, int32_t R) {
+ return L.compareTo(int64_t(R)) > 0;
+}
+template <class DigitsT>
+bool operator==(const PositiveFloat<DigitsT> &L, int32_t R) {
+ return L.compareTo(int64_t(R)) == 0;
+}
+template <class DigitsT>
+bool operator!=(const PositiveFloat<DigitsT> &L, int32_t R) {
+ return L.compareTo(int64_t(R)) != 0;
+}
+template <class DigitsT>
+bool operator<=(const PositiveFloat<DigitsT> &L, int32_t R) {
+ return L.compareTo(int64_t(R)) <= 0;
+}
+template <class DigitsT>
+bool operator>=(const PositiveFloat<DigitsT> &L, int32_t R) {
+ return L.compareTo(int64_t(R)) >= 0;
+}
+
+template <class DigitsT>
+bool operator<(uint64_t L, const PositiveFloat<DigitsT> &R) {
+ return R > L;
+}
+template <class DigitsT>
+bool operator>(uint64_t L, const PositiveFloat<DigitsT> &R) {
+ return R < L;
+}
+template <class DigitsT>
+bool operator==(uint64_t L, const PositiveFloat<DigitsT> &R) {
+ return R == L;
+}
+template <class DigitsT>
+bool operator<=(uint64_t L, const PositiveFloat<DigitsT> &R) {
+ return R >= L;
+}
+template <class DigitsT>
+bool operator>=(uint64_t L, const PositiveFloat<DigitsT> &R) {
+ return R <= L;
+}
+template <class DigitsT>
+bool operator!=(uint64_t L, const PositiveFloat<DigitsT> &R) {
+ return R != L;
+}
+template <class DigitsT>
+bool operator<(int64_t L, const PositiveFloat<DigitsT> &R) {
+ return R > L;
+}
+template <class DigitsT>
+bool operator>(int64_t L, const PositiveFloat<DigitsT> &R) {
+ return R < L;
+}
+template <class DigitsT>
+bool operator==(int64_t L, const PositiveFloat<DigitsT> &R) {
+ return R == L;
+}
+template <class DigitsT>
+bool operator<=(int64_t L, const PositiveFloat<DigitsT> &R) {
+ return R >= L;
+}
+template <class DigitsT>
+bool operator>=(int64_t L, const PositiveFloat<DigitsT> &R) {
+ return R <= L;
+}
+template <class DigitsT>
+bool operator!=(int64_t L, const PositiveFloat<DigitsT> &R) {
+ return R != L;
+}
+template <class DigitsT>
+bool operator<(uint32_t L, const PositiveFloat<DigitsT> &R) {
+ return R > L;
+}
+template <class DigitsT>
+bool operator>(uint32_t L, const PositiveFloat<DigitsT> &R) {
+ return R < L;
+}
+template <class DigitsT>
+bool operator==(uint32_t L, const PositiveFloat<DigitsT> &R) {
+ return R == L;
+}
+template <class DigitsT>
+bool operator<=(uint32_t L, const PositiveFloat<DigitsT> &R) {
+ return R >= L;
+}
+template <class DigitsT>
+bool operator>=(uint32_t L, const PositiveFloat<DigitsT> &R) {
+ return R <= L;
+}
+template <class DigitsT>
+bool operator!=(uint32_t L, const PositiveFloat<DigitsT> &R) {
+ return R != L;
+}
+template <class DigitsT>
+bool operator<(int32_t L, const PositiveFloat<DigitsT> &R) {
+ return R > L;
+}
+template <class DigitsT>
+bool operator>(int32_t L, const PositiveFloat<DigitsT> &R) {
+ return R < L;
+}
+template <class DigitsT>
+bool operator==(int32_t L, const PositiveFloat<DigitsT> &R) {
+ return R == L;
+}
+template <class DigitsT>
+bool operator<=(int32_t L, const PositiveFloat<DigitsT> &R) {
+ return R >= L;
+}
+template <class DigitsT>
+bool operator>=(int32_t L, const PositiveFloat<DigitsT> &R) {
+ return R <= L;
+}
+template <class DigitsT>
+bool operator!=(int32_t L, const PositiveFloat<DigitsT> &R) {
+ return R != L;
+}
+
+template <class DigitsT>
+uint64_t PositiveFloat<DigitsT>::scale(uint64_t N) const {
+ if (Width == 64 || N <= DigitsLimits::max())
+ return (getFloat(N) * *this).template toInt<uint64_t>();
+ std::pair<int32_t, int> Lg = lgImpl();
+ if (extractLgFloor(Lg) >= 64)
+ return UINT64_MAX;
+ if (extractLgCeiling(Lg) <= -64)
+ return 0;
+
+ uint64_t Result = 0;
+ for (int Bit = 0; Bit < 64; Bit += Width) {
+ PositiveFloat Digit = getFloat(N & DigitsLimits::max() << Bit);
+ Digit *= *this;
+
+ uint64_t Sum = Result + (Digit.toInt<uint64_t>() >> Bit);
+ if (Sum < Result)
+ return UINT64_MAX;
+ Result = Sum;
}
+ return Result;
+}
- // All blocks in postorder.
- std::vector<BlockT *> POT;
+template <class DigitsT>
+PositiveFloat<DigitsT> PositiveFloat<DigitsT>::getProduct(DigitsType L,
+ DigitsType R) {
+ // Check for zero.
+ if (!L || !R)
+ return getZero();
+
+ // Check for numbers that we can compute with 64-bit math.
+ if (Width <= 32)
+ return adjustToWidth(uint64_t(L) * uint64_t(R), 0);
- // Map Block -> Position in reverse-postorder list.
- DenseMap<BlockT *, unsigned> RPO;
+ // Do the full thing.
+ return PositiveFloat(multiply64(L, R));
+}
+template <class DigitsT>
+PositiveFloat<DigitsT> PositiveFloat<DigitsT>::getQuotient(DigitsType Dividend,
+ DigitsType Divisor) {
+ // Check for zero.
+ if (!Dividend)
+ return getZero();
+ if (!Divisor)
+ return getLargest();
+
+ if (Width == 64)
+ return PositiveFloat(divide64(Dividend, Divisor));
+
+ // We can compute this with 64-bit math.
+ int Shift = countLeadingZeros64(Dividend);
+ uint64_t Shifted = uint64_t(Dividend) << Shift;
+ uint64_t Quotient = Shifted / Divisor;
+
+ // If Quotient needs to be shifted, then adjustToWidth will round.
+ if (Quotient > DigitsLimits::max())
+ return adjustToWidth(Quotient, -Shift);
+
+ // Round based on the value of the next bit.
+ return getRounded(PositiveFloat(Quotient, -Shift),
+ Shifted % Divisor >= getHalf(Divisor));
+}
- // For each loop header, record the per-iteration probability of exiting the
- // loop. This is the reciprocal of the expected number of loop iterations.
- typedef DenseMap<BlockT*, BranchProbability> LoopExitProbMap;
- LoopExitProbMap LoopExitProb;
+template <class DigitsT>
+template <class IntT>
+IntT PositiveFloat<DigitsT>::toInt() const {
+ typedef std::numeric_limits<IntT> Limits;
+ if (*this < 1)
+ return 0;
+ if (*this >= Limits::max())
+ return Limits::max();
- // (reverse-)postorder traversal iterators.
- typedef typename std::vector<BlockT *>::iterator pot_iterator;
- typedef typename std::vector<BlockT *>::reverse_iterator rpot_iterator;
+ IntT N = Digits;
+ if (Exponent > 0) {
+ assert(size_t(Exponent) < sizeof(IntT) * 8);
+ return N << Exponent;
+ }
+ if (Exponent < 0) {
+ assert(size_t(-Exponent) < sizeof(IntT) * 8);
+ return N >> -Exponent;
+ }
+ return N;
+}
- pot_iterator pot_begin() { return POT.begin(); }
- pot_iterator pot_end() { return POT.end(); }
+template <class DigitsT>
+std::pair<int32_t, int> PositiveFloat<DigitsT>::lgImpl() const {
+ if (isZero())
+ return std::make_pair(INT32_MIN, 0);
+
+ // Get the floor of the lg of Digits.
+ int32_t LocalFloor = Width - countLeadingZerosWidth(Digits) - 1;
+
+ // Get the floor of the lg of this.
+ int32_t Floor = Exponent + LocalFloor;
+ if (Digits == UINT64_C(1) << LocalFloor)
+ return std::make_pair(Floor, 0);
+
+ // Round based on the next digit.
+ bool Round = Digits & UINT64_C(1) << (LocalFloor - 1);
+ return std::make_pair(Floor + Round, Round ? 1 : -1);
+}
- rpot_iterator rpot_begin() { return POT.rbegin(); }
- rpot_iterator rpot_end() { return POT.rend(); }
+template <class DigitsT>
+PositiveFloat<DigitsT>
+PositiveFloat<DigitsT>::normalizeExponents(PositiveFloat X) {
+ if (isZero() || X.isZero())
+ return X;
+
+ if (Exponent > X.Exponent) {
+ // Reverse the arguments.
+ *this = X.normalizeExponents(*this);
+ return X;
+ }
- rpot_iterator rpot_at(BlockT *BB) {
- rpot_iterator I = rpot_begin();
- unsigned idx = RPO.lookup(BB);
- assert(idx);
- std::advance(I, idx - 1);
+ if (Exponent == X.Exponent)
+ return X;
- assert(*I == BB);
- return I;
+ int ExponentDiff = getDiff(Exponent, X.Exponent);
+ if (ExponentDiff >= 2 * Width) {
+ *this = getZero();
+ return X;
}
- /// isBackedge - Return if edge Src -> Dst is a reachable backedge.
- ///
- bool isBackedge(BlockT *Src, BlockT *Dst) const {
- unsigned a = RPO.lookup(Src);
- if (!a)
- return false;
- unsigned b = RPO.lookup(Dst);
- assert(b && "Destination block should be reachable");
- return a >= b;
+ // Use up any leading zeros on X, and then shift this.
+ int ShiftX = std::min(countLeadingZerosWidth(X.Digits), ExponentDiff);
+ int ShiftThis = ExponentDiff - ShiftX;
+
+ if (ShiftThis >= Width) {
+ *this = getZero();
+ return X;
}
- /// getSingleBlockPred - return single BB block predecessor or NULL if
- /// BB has none or more predecessors.
- BlockT *getSingleBlockPred(BlockT *BB) {
- typename GT::ChildIteratorType
- PI = GraphTraits< Inverse<BlockT *> >::child_begin(BB),
- PE = GraphTraits< Inverse<BlockT *> >::child_end(BB);
+ X.Digits <<= ShiftX;
+ X.Exponent -= ShiftX;
+ Digits >>= ShiftThis;
+ Exponent += ShiftThis;
+ return X;
+}
- if (PI == PE)
- return nullptr;
+template <class DigitsT>
+PositiveFloat<DigitsT> &PositiveFloat<DigitsT>::
+operator+=(const PositiveFloat &X) {
+ if (isLargest() || X.isZero())
+ return *this;
+ if (isZero() || X.isLargest())
+ return *this = X;
+
+ // Normalize exponents.
+ PositiveFloat Scaled = normalizeExponents(X);
+
+ // Check for zero again.
+ if (isZero())
+ return *this = Scaled;
+ if (Scaled.isZero())
+ return *this;
+
+ // Compute sum.
+ DigitsType Sum = Digits + Scaled.Digits;
+ bool DidOverflow = Sum < Digits || Sum < Scaled.Digits;
+ Digits = Sum;
+ if (!DidOverflow)
+ return *this;
- BlockT *Pred = *PI;
+ if (Exponent == MaxExponent)
+ return *this = getLargest();
- ++PI;
- if (PI != PE)
- return nullptr;
+ ++Exponent;
+ Digits = Digits >> 1 | UINT64_C(1) << (Width - 1);
- return Pred;
+ return *this;
+}
+template <class DigitsT>
+PositiveFloat<DigitsT> &PositiveFloat<DigitsT>::
+operator-=(const PositiveFloat &X) {
+ if (X.isZero())
+ return *this;
+ if (*this <= X)
+ return *this = getZero();
+
+ // Normalize exponents.
+ PositiveFloat Scaled = normalizeExponents(X);
+ assert(Digits >= Scaled.Digits);
+
+ // Compute difference.
+ if (!Scaled.isZero()) {
+ Digits -= Scaled.Digits;
+ return *this;
}
- void doBlock(BlockT *BB, BlockT *LoopHead,
- SmallPtrSet<BlockT *, 8> &BlocksInLoop) {
+ // Check if X just barely lost its last bit. E.g., for 32-bit:
+ //
+ // 1*2^32 - 1*2^0 == 0xffffffff != 1*2^32
+ if (*this == PositiveFloat(1, X.lgFloor() + Width)) {
+ Digits = DigitsType(0) - 1;
+ --Exponent;
+ }
+ return *this;
+}
+template <class DigitsT>
+PositiveFloat<DigitsT> &PositiveFloat<DigitsT>::
+operator*=(const PositiveFloat &X) {
+ if (isZero())
+ return *this;
+ if (X.isZero())
+ return *this = X;
- DEBUG(dbgs() << "doBlock(" << getBlockName(BB) << ")\n");
- setBlockFreq(BB, 0);
+ // Save the exponents.
+ int32_t Exponents = int32_t(Exponent) + int32_t(X.Exponent);
- if (BB == LoopHead) {
- setBlockFreq(BB, EntryFreq);
- return;
- }
+ // Get the raw product.
+ *this = getProduct(Digits, X.Digits);
- if (BlockT *Pred = getSingleBlockPred(BB)) {
- if (BlocksInLoop.count(Pred))
- setBlockFreq(BB, getEdgeFreq(Pred, BB));
- // TODO: else? irreducible, ignore it for now.
- return;
- }
+ // Combine with exponents.
+ return *this <<= Exponents;
+}
+template <class DigitsT>
+PositiveFloat<DigitsT> &PositiveFloat<DigitsT>::
+operator/=(const PositiveFloat &X) {
+ if (isZero())
+ return *this;
+ if (X.isZero())
+ return *this = getLargest();
- bool isInLoop = false;
- bool isLoopHead = false;
+ // Save the exponents.
+ int32_t Exponents = int32_t(Exponent) + -int32_t(X.Exponent);
- for (typename GT::ChildIteratorType
- PI = GraphTraits< Inverse<BlockT *> >::child_begin(BB),
- PE = GraphTraits< Inverse<BlockT *> >::child_end(BB);
- PI != PE; ++PI) {
- BlockT *Pred = *PI;
-
- if (isBackedge(Pred, BB)) {
- isLoopHead = true;
- } else if (BlocksInLoop.count(Pred)) {
- incBlockFreq(BB, getEdgeFreq(Pred, BB));
- isInLoop = true;
- }
- // TODO: else? irreducible.
- }
+ // Get the raw quotient.
+ *this = getQuotient(Digits, X.Digits);
- if (!isInLoop)
- return;
+ // Combine with exponents.
+ return *this <<= Exponents;
+}
+template <class DigitsT>
+PositiveFloat<DigitsT> &PositiveFloat<DigitsT>::shiftLeft(int32_t Shift) {
+ if (Shift < 0)
+ return shiftRight(-Shift);
+ if (!Shift || isZero())
+ return *this;
+
+ // Shift as much as we can in the exponent.
+ int16_t ExponentShift = std::min(Shift, MaxExponent - Exponent);
+ Exponent += ExponentShift;
+ if (ExponentShift == Shift)
+ return *this;
+
+ // Check this late, since it's rare.
+ if (isLargest())
+ return *this;
+
+ // Shift as far as possible.
+ int32_t RawShift = std::min(Shift, countLeadingZerosWidth(Digits));
+ if (RawShift + ExponentShift < Shift)
+ // Saturate.
+ return *this = getLargest();
- if (!isLoopHead)
- return;
+ Digits <<= Shift;
+ return *this;
+}
- // This block is a loop header, so boost its frequency by the expected
- // number of loop iterations. The loop blocks will be revisited so they all
- // get this boost.
- typename LoopExitProbMap::const_iterator I = LoopExitProb.find(BB);
- assert(I != LoopExitProb.end() && "Loop header missing from table");
- Freqs[BB] /= I->second;
- DEBUG(dbgs() << "Loop header scaled to ";
- printBlockFreq(dbgs(), Freqs[BB]) << ".\n");
- }
-
- /// doLoop - Propagate block frequency down through the loop.
- void doLoop(BlockT *Head, BlockT *Tail) {
- DEBUG(dbgs() << "doLoop(" << getBlockName(Head) << ", "
- << getBlockName(Tail) << ")\n");
-
- SmallPtrSet<BlockT *, 8> BlocksInLoop;
-
- for (rpot_iterator I = rpot_at(Head), E = rpot_at(Tail); ; ++I) {
- BlockT *BB = *I;
- doBlock(BB, Head, BlocksInLoop);
-
- BlocksInLoop.insert(BB);
- if (I == E)
- break;
- }
+template <class DigitsT>
+PositiveFloat<DigitsT> &PositiveFloat<DigitsT>::shiftRight(int32_t Shift) {
+ if (Shift < 0)
+ return shiftLeft(-Shift);
+ if (!Shift || isZero())
+ return *this;
+
+ // Shift as much as we can in the exponent.
+ int16_t ExponentShift = std::min(Shift, Exponent - MinExponent);
+ Exponent -= ExponentShift;
+ if (ExponentShift == Shift)
+ return *this;
+
+ // Shift as far as possible.
+ int32_t RawShift = Shift - ExponentShift;
+ if (RawShift >= Width)
+ // Saturate.
+ return *this = getZero();
+
+ // May result in zero.
+ Digits >>= Shift;
+ return *this;
+}
- // Compute loop's cyclic probability using backedges probabilities.
- BlockFrequency BackFreq;
- for (typename GT::ChildIteratorType
- PI = GraphTraits< Inverse<BlockT *> >::child_begin(Head),
- PE = GraphTraits< Inverse<BlockT *> >::child_end(Head);
- PI != PE; ++PI) {
- BlockT *Pred = *PI;
- assert(Pred);
- if (isBackedge(Pred, Head))
- BackFreq += getEdgeFreq(Pred, Head);
- }
+template <class DigitsT>
+int PositiveFloat<DigitsT>::compare(const PositiveFloat &X) const {
+ // Check for zero.
+ if (isZero())
+ return X.isZero() ? 0 : -1;
+ if (X.isZero())
+ return 1;
+
+ // Check for the scale. Use lgFloor to be sure that the exponent difference
+ // is always lower than 64.
+ int32_t lgL = lgFloor(), lgR = X.lgFloor();
+ if (lgL != lgR)
+ return lgL < lgR ? -1 : 1;
+
+ // Compare digits.
+ if (Exponent < X.Exponent)
+ return PositiveFloatBase::compare(Digits, X.Digits, X.Exponent - Exponent);
+
+ return -PositiveFloatBase::compare(X.Digits, Digits, Exponent - X.Exponent);
+}
+
+template <class T> struct isPodLike<PositiveFloat<T>> {
+ static const bool value = true;
+};
+}
+
+//===----------------------------------------------------------------------===//
+//
+// BlockMass definition.
+//
+// TODO: Make this private to BlockFrequencyInfoImpl or delete.
+//
+//===----------------------------------------------------------------------===//
+namespace llvm {
- // The cyclic probability is freq(BackEdges) / freq(Head), where freq(Head)
- // only counts edges entering the loop, not the loop backedges.
- // The probability of leaving the loop on each iteration is:
- //
- // ExitProb = 1 - CyclicProb
- //
- // The Expected number of loop iterations is:
- //
- // Iterations = 1 / ExitProb
- //
- uint64_t D = std::max(getBlockFreq(Head).getFrequency(), UINT64_C(1));
- uint64_t N = std::max(BackFreq.getFrequency(), UINT64_C(1));
- if (N < D)
- N = D - N;
- else
- // We'd expect N < D, but rounding and saturation means that can't be
- // guaranteed.
- N = 1;
-
- // Now ExitProb = N / D, make sure it fits in an i32/i32 fraction.
- assert(N <= D);
- if (D > UINT32_MAX) {
- unsigned Shift = 32 - countLeadingZeros(D);
- D >>= Shift;
- N >>= Shift;
- if (N == 0)
- N = 1;
+/// \brief Mass of a block.
+///
+/// This class implements a sort of fixed-point fraction always between 0.0 and
+/// 1.0. getMass() == UINT64_MAX indicates a value of 1.0.
+///
+/// Masses can be added and subtracted. Simple saturation arithmetic is used,
+/// so arithmetic operations never overflow or underflow.
+///
+/// Masses can be multiplied. Multiplication treats full mass as 1.0 and uses
+/// an inexpensive floating-point algorithm that's off-by-one (almost, but not
+/// quite, maximum precision).
+///
+/// Masses can be scaled by \a BranchProbability at maximum precision.
+class BlockMass {
+ uint64_t Mass;
+
+public:
+ BlockMass() : Mass(0) {}
+ explicit BlockMass(uint64_t Mass) : Mass(Mass) {}
+
+ static BlockMass getEmpty() { return BlockMass(); }
+ static BlockMass getFull() { return BlockMass(UINT64_MAX); }
+
+ uint64_t getMass() const { return Mass; }
+
+ bool isFull() const { return Mass == UINT64_MAX; }
+ bool isEmpty() const { return !Mass; }
+
+ bool operator!() const { return isEmpty(); }
+
+ /// \brief Add another mass.
+ ///
+ /// Adds another mass, saturating at \a isFull() rather than overflowing.
+ BlockMass &operator+=(const BlockMass &X) {
+ uint64_t Sum = Mass + X.Mass;
+ Mass = Sum < Mass ? UINT64_MAX : Sum;
+ return *this;
+ }
+
+ /// \brief Subtract another mass.
+ ///
+ /// Subtracts another mass, saturating at \a isEmpty() rather than
+ /// undeflowing.
+ BlockMass &operator-=(const BlockMass &X) {
+ uint64_t Diff = Mass - X.Mass;
+ Mass = Diff > Mass ? 0 : Diff;
+ return *this;
+ }
+
+ /// \brief Scale by another mass.
+ ///
+ /// The current implementation is a little imprecise, but it's relatively
+ /// fast, never overflows, and maintains the property that 1.0*1.0==1.0
+ /// (where isFull represents the number 1.0). It's an approximation of
+ /// 128-bit multiply that gets right-shifted by 64-bits.
+ ///
+ /// For a given digit size, multiplying two-digit numbers looks like:
+ ///
+ /// U1 . L1
+ /// * U2 . L2
+ /// ============
+ /// 0 . . L1*L2
+ /// + 0 . U1*L2 . 0 // (shift left once by a digit-size)
+ /// + 0 . U2*L1 . 0 // (shift left once by a digit-size)
+ /// + U1*L2 . 0 . 0 // (shift left twice by a digit-size)
+ ///
+ /// BlockMass has 64-bit numbers. Split each into two 32-bit digits, stored
+ /// 64-bit. Add 1 to the lower digits, to model isFull as 1.0; this won't
+ /// overflow, since we have 64-bit storage for each digit.
+ ///
+ /// To do this accurately, (a) multiply into two 64-bit digits, incrementing
+ /// the upper digit on overflows of the lower digit (carry), (b) subtract 1
+ /// from the lower digit, decrementing the upper digit on underflow (carry),
+ /// and (c) truncate the lower digit. For the 1.0*1.0 case, the upper digit
+ /// will be 0 at the end of step (a), and then will underflow back to isFull
+ /// (1.0) in step (b).
+ ///
+ /// Instead, the implementation does something a little faster with a small
+ /// loss of accuracy: ignore the lower 64-bit digit entirely. The loss of
+ /// accuracy is small, since the sum of the unmodelled carries is 0 or 1
+ /// (i.e., step (a) will overflow at most once, and step (b) will underflow
+ /// only if step (a) overflows).
+ ///
+ /// This is the formula we're calculating:
+ ///
+ /// U1.L1 * U2.L2 == U1 * U2 + (U1 * (L2+1))>>32 + (U2 * (L1+1))>>32
+ ///
+ /// As a demonstration of 1.0*1.0, consider two 4-bit numbers that are both
+ /// full (1111).
+ ///
+ /// U1.L1 * U2.L2 == U1 * U2 + (U1 * (L2+1))>>2 + (U2 * (L1+1))>>2
+ /// 11.11 * 11.11 == 11 * 11 + (11 * (11+1))/4 + (11 * (11+1))/4
+ /// == 1001 + (11 * 100)/4 + (11 * 100)/4
+ /// == 1001 + 1100/4 + 1100/4
+ /// == 1001 + 0011 + 0011
+ /// == 1111
+ BlockMass &operator*=(const BlockMass &X) {
+ uint64_t U1 = Mass >> 32, L1 = Mass & UINT32_MAX, U2 = X.Mass >> 32,
+ L2 = X.Mass & UINT32_MAX;
+ Mass = U1 * U2 + (U1 * (L2 + 1) >> 32) + ((L1 + 1) * U2 >> 32);
+ return *this;
+ }
+
+ /// \brief Multiply by a branch probability.
+ ///
+ /// Multiply by P. Guarantees full precision.
+ ///
+ /// This could be naively implemented by multiplying by the numerator and
+ /// dividing by the denominator, but in what order? Multiplying first can
+ /// overflow, while dividing first will lose precision (potentially, changing
+ /// a non-zero mass to zero).
+ ///
+ /// The implementation mixes the two methods. Since \a BranchProbability
+ /// uses 32-bits and \a BlockMass 64-bits, shift the mass as far to the left
+ /// as there is room, then divide by the denominator to get a quotient.
+ /// Multiplying by the numerator and right shifting gives a first
+ /// approximation.
+ ///
+ /// Calculate the error in this first approximation by calculating the
+ /// opposite mass (multiply by the opposite numerator and shift) and
+ /// subtracting both from teh original mass.
+ ///
+ /// Add to the first approximation the correct fraction of this error value.
+ /// This time, multiply first and then divide, since there is no danger of
+ /// overflow.
+ ///
+ /// \pre P represents a fraction between 0.0 and 1.0.
+ BlockMass &operator*=(const BranchProbability &P);
+
+ bool operator==(const BlockMass &X) const { return Mass == X.Mass; }
+ bool operator<(const BlockMass &X) const { return Mass < X.Mass; }
+ bool operator!=(const BlockMass &X) const { return !(*this == X); }
+ bool operator>(const BlockMass &X) const { return X < *this; }
+ bool operator<=(const BlockMass &X) const { return !(*this > X); }
+ bool operator>=(const BlockMass &X) const { return !(*this < X); }
+
+ /// \brief Convert to floating point.
+ ///
+ /// Convert to a float. \a isFull() gives 1.0, while \a isEmpty() gives
+ /// slightly above 0.0.
+ PositiveFloat<uint64_t> toFloat() const;
+
+ void dump() const;
+ raw_ostream &print(raw_ostream &OS) const;
+};
+
+inline BlockMass operator+(const BlockMass &L, const BlockMass &R) {
+ return BlockMass(L) += R;
+}
+inline BlockMass operator-(const BlockMass &L, const BlockMass &R) {
+ return BlockMass(L) -= R;
+}
+inline BlockMass operator*(const BlockMass &L, const BlockMass &R) {
+ return BlockMass(L) *= R;
+}
+inline BlockMass operator*(const BlockMass &L, const BranchProbability &R) {
+ return BlockMass(L) *= R;
+}
+inline BlockMass operator*(const BranchProbability &L, const BlockMass &R) {
+ return BlockMass(R) *= L;
+}
+
+inline raw_ostream &operator<<(raw_ostream &OS, const BlockMass &X) {
+ return X.print(OS);
+}
+
+template <> struct isPodLike<BlockMass> {
+ static const bool value = true;
+};
+}
+
+//===----------------------------------------------------------------------===//
+//
+// BlockFrequencyInfoImpl definition.
+//
+//===----------------------------------------------------------------------===//
+namespace llvm {
+
+class BasicBlock;
+class BranchProbabilityInfo;
+class Function;
+class Loop;
+class LoopInfo;
+class MachineBasicBlock;
+class MachineBranchProbabilityInfo;
+class MachineFunction;
+class MachineLoop;
+class MachineLoopInfo;
+
+/// \brief Base class for BlockFrequencyInfoImpl
+///
+/// BlockFrequencyInfoImplBase has supporting data structures and some
+/// algorithms for BlockFrequencyInfoImplBase. Only algorithms that depend on
+/// the block type (or that call such algorithms) are skipped here.
+///
+/// Nevertheless, the majority of the overall algorithm documention lives with
+/// BlockFrequencyInfoImpl. See there for details.
+class BlockFrequencyInfoImplBase {
+public:
+ typedef PositiveFloat<uint64_t> Float;
+
+ /// \brief Representative of a block.
+ ///
+ /// This is a simple wrapper around an index into the reverse-post-order
+ /// traversal of the blocks.
+ ///
+ /// Unlike a block pointer, its order has meaning (location in the
+ /// topological sort) and it's class is the same regardless of block type.
+ struct BlockNode {
+ typedef uint32_t IndexType;
+ IndexType Index;
+
+ bool operator==(const BlockNode &X) const { return Index == X.Index; }
+ bool operator!=(const BlockNode &X) const { return Index != X.Index; }
+ bool operator<=(const BlockNode &X) const { return Index <= X.Index; }
+ bool operator>=(const BlockNode &X) const { return Index >= X.Index; }
+ bool operator<(const BlockNode &X) const { return Index < X.Index; }
+ bool operator>(const BlockNode &X) const { return Index > X.Index; }
+
+ BlockNode() : Index(UINT32_MAX) {}
+ BlockNode(IndexType Index) : Index(Index) {}
+
+ bool isValid() const { return Index <= getMaxIndex(); }
+ static size_t getMaxIndex() { return UINT32_MAX - 1; }
+ };
+
+ /// \brief Stats about a block itself.
+ struct FrequencyData {
+ Float Floating;
+ uint64_t Integer;
+ };
+
+ /// \brief Index of loop information.
+ struct WorkingData {
+ BlockNode ContainingLoop; ///< The block whose loop this block is inside.
+ uint32_t LoopIndex; ///< Index into PackagedLoops.
+ bool IsPackaged; ///< Has ContainingLoop been packaged up?
+ bool IsAPackage; ///< Has this block's loop been packaged up?
+ BlockMass Mass; ///< Mass distribution from the entry block.
+
+ WorkingData()
+ : LoopIndex(UINT32_MAX), IsPackaged(false), IsAPackage(false) {}
+
+ bool hasLoopHeader() const { return ContainingLoop.isValid(); }
+ bool isLoopHeader() const { return LoopIndex != UINT32_MAX; }
+ };
+
+ /// \brief Unscaled probability weight.
+ ///
+ /// Probability weight for an edge in the graph (including the
+ /// successor/target node).
+ ///
+ /// All edges in the original function are 32-bit. However, exit edges from
+ /// loop packages are taken from 64-bit exit masses, so we need 64-bits of
+ /// space in general.
+ ///
+ /// In addition to the raw weight amount, Weight stores the type of the edge
+ /// in the current context (i.e., the context of the loop being processed).
+ /// Is this a local edge within the loop, an exit from the loop, or a
+ /// backedge to the loop header?
+ struct Weight {
+ enum DistType { Local, Exit, Backedge };
+ DistType Type;
+ BlockNode TargetNode;
+ uint64_t Amount;
+ Weight() : Type(Local), Amount(0) {}
+ };
+
+ /// \brief Distribution of unscaled probability weight.
+ ///
+ /// Distribution of unscaled probability weight to a set of successors.
+ ///
+ /// This class collates the successor edge weights for later processing.
+ ///
+ /// \a DidOverflow indicates whether \a Total did overflow while adding to
+ /// the distribution. It should never overflow twice. There's no flag for
+ /// whether \a ForwardTotal overflows, since when \a Total exceeds 32-bits
+ /// they both get re-computed during \a normalize().
+ struct Distribution {
+ typedef SmallVector<Weight, 4> WeightList;
+ WeightList Weights; ///< Individual successor weights.
+ uint64_t Total; ///< Sum of all weights.
+ bool DidOverflow; ///< Whether \a Total did overflow.
+ uint32_t ForwardTotal; ///< Total excluding backedges.
+
+ Distribution() : Total(0), DidOverflow(false), ForwardTotal(0) {}
+ void addLocal(const BlockNode &Node, uint64_t Amount) {
+ add(Node, Amount, Weight::Local);
}
- BranchProbability LEP = BranchProbability(N, D);
- LoopExitProb.insert(std::make_pair(Head, LEP));
- DEBUG(dbgs() << "LoopExitProb[" << getBlockName(Head) << "] = " << LEP
- << " from 1 - ";
- printBlockFreq(dbgs(), BackFreq) << " / ";
- printBlockFreq(dbgs(), getBlockFreq(Head)) << ".\n");
- }
-
- friend class BlockFrequencyInfo;
- friend class MachineBlockFrequencyInfo;
-
- BlockFrequencyInfoImpl() { }
-
- void doFunction(FunctionT *fn, BranchProbabilityInfoT *bpi) {
- Fn = fn;
- BPI = bpi;
-
- // Clear everything.
- RPO.clear();
- POT.clear();
- LoopExitProb.clear();
- Freqs.clear();
-
- BlockT *EntryBlock = fn->begin();
-
- std::copy(po_begin(EntryBlock), po_end(EntryBlock), std::back_inserter(POT));
-
- unsigned RPOidx = 0;
- for (rpot_iterator I = rpot_begin(), E = rpot_end(); I != E; ++I) {
- BlockT *BB = *I;
- RPO[BB] = ++RPOidx;
- DEBUG(dbgs() << "RPO[" << getBlockName(BB) << "] = " << RPO[BB] << "\n");
+ void addExit(const BlockNode &Node, uint64_t Amount) {
+ add(Node, Amount, Weight::Exit);
+ }
+ void addBackedge(const BlockNode &Node, uint64_t Amount) {
+ add(Node, Amount, Weight::Backedge);
}
- // Travel over all blocks in postorder.
- for (pot_iterator I = pot_begin(), E = pot_end(); I != E; ++I) {
- BlockT *BB = *I;
- BlockT *LastTail = nullptr;
- DEBUG(dbgs() << "POT: " << getBlockName(BB) << "\n");
-
- for (typename GT::ChildIteratorType
- PI = GraphTraits< Inverse<BlockT *> >::child_begin(BB),
- PE = GraphTraits< Inverse<BlockT *> >::child_end(BB);
- PI != PE; ++PI) {
-
- BlockT *Pred = *PI;
- if (isBackedge(Pred, BB) && (!LastTail || RPO[Pred] > RPO[LastTail]))
- LastTail = Pred;
- }
+ /// \brief Normalize the distribution.
+ ///
+ /// Combines multiple edges to the same \a Weight::TargetNode and scales
+ /// down so that \a Total fits into 32-bits.
+ ///
+ /// This is linear in the size of \a Weights. For the vast majority of
+ /// cases, adjacent edge weights are combined by sorting WeightList and
+ /// combining adjacent weights. However, for very large edge lists an
+ /// auxiliary hash table is used.
+ void normalize();
+
+ private:
+ void add(const BlockNode &Node, uint64_t Amount, Weight::DistType Type);
+ };
- if (LastTail)
- doLoop(BB, LastTail);
- }
+ /// \brief Data for a packaged loop.
+ ///
+ /// Contains the data necessary to represent represent a loop as a node once
+ /// it's packaged.
+ ///
+ /// PackagedLoopData inherits from BlockData to give the node the necessary
+ /// stats. Further, it has a list of successors, list of members, and stores
+ /// the backedge mass assigned to this loop.
+ struct PackagedLoopData {
+ typedef SmallVector<std::pair<BlockNode, BlockMass>, 4> ExitMap;
+ typedef SmallVector<BlockNode, 4> MemberList;
+ BlockNode Header; ///< Header.
+ ExitMap Exits; ///< Successor edges (and weights).
+ MemberList Members; ///< Members of the loop.
+ BlockMass BackedgeMass; ///< Mass returned to loop header.
+ BlockMass Mass;
+ Float Scale;
+
+ PackagedLoopData(const BlockNode &Header) : Header(Header) {}
+ };
+
+ /// \brief Data about each block. This is used downstream.
+ std::vector<FrequencyData> Freqs;
+
+ /// \brief Loop data: see initializeLoops().
+ std::vector<WorkingData> Working;
+
+ /// \brief Indexed information about packaged loops.
+ std::vector<PackagedLoopData> PackagedLoops;
+
+ /// \brief Create the initial loop packages.
+ ///
+ /// Initializes PackagedLoops using the data in Working about backedges
+ /// and containing loops. Called by initializeLoops().
+ ///
+ /// \post WorkingData::LoopIndex has been initialized for every loop header
+ /// and PackagedLoopData::Members has been initialized.
+
+ /// \brief Add all edges out of a packaged loop to the distribution.
+ ///
+ /// Adds all edges from LocalLoopHead to Dist. Calls addToDist() to add each
+ /// successor edge.
+ void addLoopSuccessorsToDist(const BlockNode &LoopHead,
+ const BlockNode &LocalLoopHead,
+ Distribution &Dist);
+
+ /// \brief Add an edge to the distribution.
+ ///
+ /// Adds an edge to Succ to Dist. If \c LoopHead.isValid(), then whether the
+ /// edge is forward/exit/backedge is in the context of LoopHead. Otherwise,
+ /// every edge should be a forward edge (since all the loops are packaged
+ /// up).
+ void addToDist(Distribution &Dist, const BlockNode &LoopHead,
+ const BlockNode &Pred, const BlockNode &Succ, uint64_t Weight);
+
+ PackagedLoopData &getLoopPackage(const BlockNode &Head) {
+ assert(Head.Index < Working.size());
+ size_t Index = Working[Head.Index].LoopIndex;
+ assert(Index < PackagedLoops.size());
+ return PackagedLoops[Index];
+ }
+
+ /// \brief Distribute mass according to a distribution.
+ ///
+ /// Distributes the mass in Source according to Dist. If LoopHead.isValid(),
+ /// backedges and exits are stored in its entry in PackagedLoops.
+ ///
+ /// Mass is distributed in parallel from two copies of the source mass.
+ ///
+ /// The first mass (forward) represents the distribution of mass through the
+ /// local DAG. This distribution should lose mass at loop exits and ignore
+ /// backedges.
+ ///
+ /// The second mass (general) represents the behavior of the loop in the
+ /// global context. In a given distribution from the head, how much mass
+ /// exits, and to where? How much mass returns to the loop head?
+ ///
+ /// The forward mass should be split up between local successors and exits,
+ /// but only actually distributed to the local successors. The general mass
+ /// should be split up between all three types of successors, but distributed
+ /// only to exits and backedges.
+ void distributeMass(const BlockNode &Source, const BlockNode &LoopHead,
+ Distribution &Dist);
+
+ /// \brief Compute the loop scale for a loop.
+ void computeLoopScale(const BlockNode &LoopHead);
+
+ /// \brief Package up a loop.
+ void packageLoop(const BlockNode &LoopHead);
+
+ /// \brief Finalize frequency metrics.
+ ///
+ /// Unwraps loop packages, calculates final frequencies, and cleans up
+ /// no-longer-needed data structures.
+ void finalizeMetrics();
+
+ /// \brief Clear all memory.
+ void clear();
+
+ virtual std::string getBlockName(const BlockNode &Node) const;
+
+ virtual raw_ostream &print(raw_ostream &OS) const { return OS; }
+ void dump() const { print(dbgs()); }
+
+ Float getFloatingBlockFreq(const BlockNode &Node) const;
+
+ BlockFrequency getBlockFreq(const BlockNode &Node) const;
+
+ raw_ostream &printBlockFreq(raw_ostream &OS, const BlockNode &Node) const;
+ raw_ostream &printBlockFreq(raw_ostream &OS,
+ const BlockFrequency &Freq) const;
+
+ uint64_t getEntryFreq() const {
+ assert(!Freqs.empty());
+ return Freqs[0].Integer;
+ }
+ /// \brief Virtual destructor.
+ ///
+ /// Need a virtual destructor to mask the compiler warning about
+ /// getBlockName().
+ virtual ~BlockFrequencyInfoImplBase() {}
+};
+
+namespace bfi_detail {
+template <class BlockT> struct TypeMap {};
+template <> struct TypeMap<BasicBlock> {
+ typedef BasicBlock BlockT;
+ typedef Function FunctionT;
+ typedef BranchProbabilityInfo BranchProbabilityInfoT;
+ typedef Loop LoopT;
+ typedef LoopInfo LoopInfoT;
+};
+template <> struct TypeMap<MachineBasicBlock> {
+ typedef MachineBasicBlock BlockT;
+ typedef MachineFunction FunctionT;
+ typedef MachineBranchProbabilityInfo BranchProbabilityInfoT;
+ typedef MachineLoop LoopT;
+ typedef MachineLoopInfo LoopInfoT;
+};
+
+/// \brief Get the name of a MachineBasicBlock.
+///
+/// Get the name of a MachineBasicBlock. It's templated so that including from
+/// CodeGen is unnecessary (that would be a layering issue).
+///
+/// This is used mainly for debug output. The name is similar to
+/// MachineBasicBlock::getFullName(), but skips the name of the function.
+template <class BlockT> std::string getBlockName(const BlockT *BB) {
+ assert(BB && "Unexpected nullptr");
+ if (BB->getBasicBlock())
+ return BB->getName().str();
+ return (Twine("BB") + Twine(BB->getNumber())).str();
+}
+/// \brief Get the name of a BasicBlock.
+template <> inline std::string getBlockName(const BasicBlock *BB) {
+ assert(BB && "Unexpected nullptr");
+ return BB->getName().str();
+}
+}
+
+/// \brief Shared implementation for block frequency analysis.
+///
+/// This is a shared implementation of BlockFrequencyInfo and
+/// MachineBlockFrequencyInfo, and calculates the relative frequencies of
+/// blocks.
+///
+/// This algorithm leverages BlockMass and PositiveFloat to maintain precision,
+/// separates mass distribution from loop scaling, and dithers to eliminate
+/// probability mass loss.
+///
+/// The implementation is split between BlockFrequencyInfoImpl, which knows the
+/// type of graph being modelled (BasicBlock vs. MachineBasicBlock), and
+/// BlockFrequencyInfoImplBase, which doesn't. The base class uses \a
+/// BlockNode, a wrapper around a uint32_t. BlockNode is numbered from 0 in
+/// reverse-post order. This gives two advantages: it's easy to compare the
+/// relative ordering of two nodes, and maps keyed on BlockT can be represented
+/// by vectors.
+///
+/// This algorithm is O(V+E), unless there is irreducible control flow, in
+/// which case it's O(V*E) in the worst case.
+///
+/// These are the main stages:
+///
+/// 0. Reverse post-order traversal (\a initializeRPOT()).
+///
+/// Run a single post-order traversal and save it (in reverse) in RPOT.
+/// All other stages make use of this ordering. Save a lookup from BlockT
+/// to BlockNode (the index into RPOT) in Nodes.
+///
+/// 1. Loop indexing (\a initializeLoops()).
+///
+/// Translate LoopInfo/MachineLoopInfo into a form suitable for the rest of
+/// the algorithm. In particular, store the immediate members of each loop
+/// in reverse post-order.
+///
+/// 2. Calculate mass and scale in loops (\a computeMassInLoops()).
+///
+/// For each loop (bottom-up), distribute mass through the DAG resulting
+/// from ignoring backedges and treating sub-loops as a single pseudo-node.
+/// Track the backedge mass distributed to the loop header, and use it to
+/// calculate the loop scale (number of loop iterations).
+///
+/// Visiting loops bottom-up is a post-order traversal of loop headers.
+/// For each loop, immediate members that represent sub-loops will already
+/// have been visited and packaged into a pseudo-node.
+///
+/// Distributing mass in a loop is a reverse-post-order traversal through
+/// the loop. Start by assigning full mass to the Loop header. For each
+/// node in the loop:
+///
+/// - Fetch and categorize the weight distribution for its successors.
+/// If this is a packaged-subloop, the weight distribution is stored
+/// in \a PackagedLoopData::Exits. Otherwise, fetch it from
+/// BranchProbabilityInfo.
+///
+/// - Each successor is categorized as \a Weight::Local, a normal
+/// forward edge within the current loop, \a Weight::Backedge, a
+/// backedge to the loop header, or \a Weight::Exit, any successor
+/// outside the loop. The weight, the successor, and its category
+/// are stored in \a Distribution. There can be multiple edges to
+/// each successor.
+///
+/// - Normalize the distribution: scale weights down so that their sum
+/// is 32-bits, and coalesce multiple edges to the same node.
+///
+/// - Distribute the mass accordingly, dithering to minimize mass loss,
+/// as described in \a distributeMass(). Mass is distributed in
+/// parallel in two ways: forward, and general. Local successors
+/// take their mass from the forward mass, while exit and backedge
+/// successors take their mass from the general mass. Additionally,
+/// exit edges use up (ignored) mass from the forward mass, and local
+/// edges use up (ignored) mass from the general distribution.
+///
+/// Finally, calculate the loop scale from the accumulated backedge mass.
+///
+/// 3. Distribute mass in the function (\a computeMassInFunction()).
+///
+/// Finally, distribute mass through the DAG resulting from packaging all
+/// loops in the function. This uses the same algorithm as distributing
+/// mass in a loop, except that there are no exit or backedge edges.
+///
+/// 4. Loop unpackaging and cleanup (\a finalizeMetrics()).
+///
+/// Initialize the frequency to a floating point representation of its
+/// mass.
+///
+/// Visit loops top-down (reverse post-order), scaling the loop header's
+/// frequency by its psuedo-node's mass and loop scale. Keep track of the
+/// minimum and maximum final frequencies.
+///
+/// Using the min and max frequencies as a guide, translate floating point
+/// frequencies to an appropriate range in uint64_t.
+///
+/// It has some known flaws.
+///
+/// - Irreducible control flow isn't modelled correctly. In particular,
+/// LoopInfo and MachineLoopInfo ignore irreducible backedges. The main
+/// result is that irreducible SCCs will under-scaled. No mass is lost,
+/// but the computed branch weights for the loop pseudo-node will be
+/// incorrect.
+///
+/// Modelling irreducible control flow exactly involves setting up and
+/// solving a group of infinite geometric series. Such precision is
+/// unlikely to be worthwhile, since most of our algorithms give up on
+/// irreducible control flow anyway.
+///
+/// Nevertheless, we might find that we need to get closer. If
+/// LoopInfo/MachineLoopInfo flags loops with irreducible control flow
+/// (and/or the function as a whole), we can find the SCCs, compute an
+/// approximate exit frequency for the SCC as a whole, and scale up
+/// accordingly.
+///
+/// - Loop scale is limited to 4096 per loop (2^12) to avoid exhausting
+/// BlockFrequency's 64-bit integer precision.
+template <class BT> class BlockFrequencyInfoImpl : BlockFrequencyInfoImplBase {
+ typedef typename bfi_detail::TypeMap<BT>::BlockT BlockT;
+ typedef typename bfi_detail::TypeMap<BT>::FunctionT FunctionT;
+ typedef typename bfi_detail::TypeMap<BT>::BranchProbabilityInfoT
+ BranchProbabilityInfoT;
+ typedef typename bfi_detail::TypeMap<BT>::LoopT LoopT;
+ typedef typename bfi_detail::TypeMap<BT>::LoopInfoT LoopInfoT;
+
+ typedef GraphTraits<const BlockT *> Successor;
+ typedef GraphTraits<Inverse<const BlockT *>> Predecessor;
+
+ const BranchProbabilityInfoT *BPI;
+ const LoopInfoT *LI;
+ const FunctionT *F;
+
+ // All blocks in reverse postorder.
+ std::vector<const BlockT *> RPOT;
+ DenseMap<const BlockT *, BlockNode> Nodes;
- // At the end assume the whole function as a loop, and travel over it once
- // again.
- doLoop(*(rpot_begin()), *(pot_begin()));
+ typedef typename std::vector<const BlockT *>::const_iterator rpot_iterator;
+
+ rpot_iterator rpot_begin() const { return RPOT.begin(); }
+ rpot_iterator rpot_end() const { return RPOT.end(); }
+
+ size_t getIndex(const rpot_iterator &I) const { return I - rpot_begin(); }
+
+ BlockNode getNode(const rpot_iterator &I) const {
+ return BlockNode(getIndex(I));
+ }
+ BlockNode getNode(const BlockT *BB) const { return Nodes.lookup(BB); }
+
+ const BlockT *getBlock(const BlockNode &Node) const {
+ return RPOT[Node.Index];
+ }
+
+ void initializeRPOT();
+ void initializeLoops();
+ void runOnFunction(const FunctionT *F);
+
+ void propagateMassToSuccessors(const BlockNode &LoopHead,
+ const BlockNode &Node);
+ void computeMassInLoops();
+ void computeMassInLoop(const BlockNode &LoopHead);
+ void computeMassInFunction();
+
+ std::string getBlockName(const BlockNode &Node) const override {
+ return bfi_detail::getBlockName(getBlock(Node));
}
public:
+ const FunctionT *getFunction() const { return F; }
- uint64_t getEntryFreq() { return EntryFreq; }
+ void doFunction(const FunctionT *F, const BranchProbabilityInfoT *BPI,
+ const LoopInfoT *LI);
+ BlockFrequencyInfoImpl() : BPI(0), LI(0), F(0) {}
- /// getBlockFreq - Return block frequency. Return 0 if we don't have it.
+ using BlockFrequencyInfoImplBase::getEntryFreq;
BlockFrequency getBlockFreq(const BlockT *BB) const {
- typename DenseMap<const BlockT *, BlockFrequency>::const_iterator
- I = Freqs.find(BB);
- if (I != Freqs.end())
- return I->second;
- return 0;
+ return BlockFrequencyInfoImplBase::getBlockFreq(getNode(BB));
+ }
+ Float getFloatingBlockFreq(const BlockT *BB) const {
+ return BlockFrequencyInfoImplBase::getFloatingBlockFreq(getNode(BB));
}
- void print(raw_ostream &OS) const {
- OS << "\n\n---- Block Freqs ----\n";
- for (typename FunctionT::iterator I = Fn->begin(), E = Fn->end(); I != E;) {
- BlockT *BB = I++;
- OS << " " << getBlockName(BB) << " = ";
- printBlockFreq(OS, getBlockFreq(BB)) << "\n";
-
- for (typename GraphTraits<BlockT *>::ChildIteratorType
- SI = GraphTraits<BlockT *>::child_begin(BB),
- SE = GraphTraits<BlockT *>::child_end(BB); SI != SE; ++SI) {
- BlockT *Succ = *SI;
- OS << " " << getBlockName(BB) << " -> " << getBlockName(Succ)
- << " = "; printBlockFreq(OS, getEdgeFreq(BB, Succ)) << "\n";
- }
- }
+ /// \brief Print the frequencies for the current function.
+ ///
+ /// Prints the frequencies for the blocks in the current function.
+ ///
+ /// Blocks are printed in the natural iteration order of the function, rather
+ /// than reverse post-order. This provides two advantages: writing -analyze
+ /// tests is easier (since blocks come out in source order), and even
+ /// unreachable blocks are printed.
+ raw_ostream &print(raw_ostream &OS) const override;
+ using BlockFrequencyInfoImplBase::dump;
+
+ using BlockFrequencyInfoImplBase::printBlockFreq;
+ raw_ostream &printBlockFreq(raw_ostream &OS, const BlockT *BB) const {
+ return BlockFrequencyInfoImplBase::printBlockFreq(OS, getNode(BB));
}
+};
+
+template <class BT>
+void BlockFrequencyInfoImpl<BT>::doFunction(const FunctionT *F,
+ const BranchProbabilityInfoT *BPI,
+ const LoopInfoT *LI) {
+ // Save the parameters.
+ this->BPI = BPI;
+ this->LI = LI;
+ this->F = F;
+
+ // Clean up left-over data structures.
+ BlockFrequencyInfoImplBase::clear();
+ RPOT.clear();
+ Nodes.clear();
+
+ // Initialize.
+ DEBUG(dbgs() << "\nblock-frequency: " << F->getName() << "\n================="
+ << std::string(F->getName().size(), '=') << "\n");
+ initializeRPOT();
+ initializeLoops();
+
+ // Visit loops in post-order to find thelocal mass distribution, and then do
+ // the full function.
+ computeMassInLoops();
+ computeMassInFunction();
+ finalizeMetrics();
+}
- void dump() const {
- print(dbgs());
+template <class BT> void BlockFrequencyInfoImpl<BT>::initializeRPOT() {
+ const BlockT *Entry = F->begin();
+ RPOT.reserve(F->size());
+ std::copy(po_begin(Entry), po_end(Entry), std::back_inserter(RPOT));
+ std::reverse(RPOT.begin(), RPOT.end());
+
+ assert(RPOT.size() - 1 <= BlockNode::getMaxIndex() &&
+ "More nodes in function than Block Frequency Info supports");
+
+ DEBUG(dbgs() << "reverse-post-order-traversal\n");
+ for (rpot_iterator I = rpot_begin(), E = rpot_end(); I != E; ++I) {
+ BlockNode Node = getNode(I);
+ DEBUG(dbgs() << " - " << getIndex(I) << ": " << getBlockName(Node) << "\n");
+ Nodes[*I] = Node;
}
- // Utility method that looks up the block frequency associated with BB and
- // prints it to OS.
- raw_ostream &printBlockFreq(raw_ostream &OS,
- const BlockT *BB) {
- return printBlockFreq(OS, getBlockFreq(BB));
+ Working.resize(RPOT.size());
+ Freqs.resize(RPOT.size());
+}
+
+template <class BT> void BlockFrequencyInfoImpl<BT>::initializeLoops() {
+ DEBUG(dbgs() << "loop-detection\n");
+ if (LI->empty())
+ return;
+
+ // Visit loops top down and assign them an index.
+ std::deque<const LoopT *> Q;
+ Q.insert(Q.end(), LI->begin(), LI->end());
+ while (!Q.empty()) {
+ const LoopT *Loop = Q.front();
+ Q.pop_front();
+ Q.insert(Q.end(), Loop->begin(), Loop->end());
+
+ // Save the order this loop was visited.
+ BlockNode Header = getNode(Loop->getHeader());
+ assert(Header.isValid());
+
+ Working[Header.Index].LoopIndex = PackagedLoops.size();
+ PackagedLoops.emplace_back(Header);
+ DEBUG(dbgs() << " - loop = " << getBlockName(Header) << "\n");
}
- raw_ostream &printBlockFreq(raw_ostream &OS,
- const BlockFrequency &Freq) const {
- // Convert fixed-point number to decimal.
- uint64_t Frequency = Freq.getFrequency();
- OS << Frequency / EntryFreq << ".";
- uint64_t Rem = Frequency % EntryFreq;
- uint64_t Eps = 1;
- do {
- Rem *= 10;
- Eps *= 10;
- OS << Rem / EntryFreq;
- Rem = Rem % EntryFreq;
- } while (Rem >= Eps/2);
- return OS;
+ // Visit nodes in reverse post-order and add them to their deepest containing
+ // loop.
+ for (size_t Index = 0; Index < RPOT.size(); ++Index) {
+ const LoopT *Loop = LI->getLoopFor(RPOT[Index]);
+ if (!Loop)
+ continue;
+
+ // If this is a loop header, find its parent loop (if any).
+ if (Working[Index].isLoopHeader())
+ if (!(Loop = Loop->getParentLoop()))
+ continue;
+
+ // Add this node to its containing loop's member list.
+ BlockNode Header = getNode(Loop->getHeader());
+ assert(Header.isValid());
+ const auto &HeaderData = Working[Header.Index];
+ assert(HeaderData.isLoopHeader());
+
+ Working[Index].ContainingLoop = Header;
+ PackagedLoops[HeaderData.LoopIndex].Members.push_back(Index);
+ DEBUG(dbgs() << " - loop = " << getBlockName(Header)
+ << ": member = " << getBlockName(Index) << "\n");
}
+}
-};
+template <class BT> void BlockFrequencyInfoImpl<BT>::computeMassInLoops() {
+ // Visit loops with the deepest first, and the top-level loops last.
+ for (auto L = PackagedLoops.rbegin(), LE = PackagedLoops.rend(); L != LE; ++L)
+ computeMassInLoop(L->Header);
+}
+
+template <class BT>
+void BlockFrequencyInfoImpl<BT>::computeMassInLoop(const BlockNode &LoopHead) {
+ // Compute mass in loop.
+ DEBUG(dbgs() << "compute-mass-in-loop: " << getBlockName(LoopHead) << "\n");
+
+ Working[LoopHead.Index].Mass = BlockMass::getFull();
+ propagateMassToSuccessors(LoopHead, LoopHead);
+ for (const BlockNode &M : getLoopPackage(LoopHead).Members)
+ propagateMassToSuccessors(LoopHead, M);
+
+ computeLoopScale(LoopHead);
+ packageLoop(LoopHead);
+}
+
+template <class BT> void BlockFrequencyInfoImpl<BT>::computeMassInFunction() {
+ // Compute mass in function.
+ DEBUG(dbgs() << "compute-mass-in-function\n");
+ Working[0].Mass = BlockMass::getFull();
+ for (rpot_iterator I = rpot_begin(), IE = rpot_end(); I != IE; ++I) {
+ // Check for nodes that have been packaged.
+ BlockNode Node = getNode(I);
+ if (Working[Node.Index].hasLoopHeader())
+ continue;
+
+ propagateMassToSuccessors(BlockNode(), Node);
+ }
+}
+
+template <class BT>
+void
+BlockFrequencyInfoImpl<BT>::propagateMassToSuccessors(const BlockNode &LoopHead,
+ const BlockNode &Node) {
+ DEBUG(dbgs() << " - node: " << getBlockName(Node) << "\n");
+ // Calculate probability for successors.
+ Distribution Dist;
+ if (Node != LoopHead && Working[Node.Index].isLoopHeader())
+ addLoopSuccessorsToDist(LoopHead, Node, Dist);
+ else {
+ const BlockT *BB = getBlock(Node);
+ for (auto SI = Successor::child_begin(BB), SE = Successor::child_end(BB);
+ SI != SE; ++SI)
+ // Do not dereference SI, or getEdgeWeight() is linear in the number of
+ // successors.
+ addToDist(Dist, LoopHead, Node, getNode(*SI), BPI->getEdgeWeight(BB, SI));
+ }
+
+ // Distribute mass to successors, saving exit and backedge data in the
+ // loop header.
+ distributeMass(Node, LoopHead, Dist);
+}
+
+template <class BT>
+raw_ostream &BlockFrequencyInfoImpl<BT>::print(raw_ostream &OS) const {
+ if (!F)
+ return OS;
+ OS << "block-frequency-info: " << F->getName() << "\n";
+ for (const BlockT &BB : *F)
+ OS << " - " << bfi_detail::getBlockName(&BB)
+ << ": float = " << getFloatingBlockFreq(&BB)
+ << ", int = " << getBlockFreq(&BB).getFrequency() << "\n";
+
+ // Add an extra newline for readability.
+ OS << "\n";
+ return OS;
+}
}
#endif
Modified: llvm/trunk/lib/Analysis/BlockFrequencyInfo.cpp
URL: http://llvm.org/viewvc/llvm-project/llvm/trunk/lib/Analysis/BlockFrequencyInfo.cpp?rev=206622&r1=206621&r2=206622&view=diff
==============================================================================
--- llvm/trunk/lib/Analysis/BlockFrequencyInfo.cpp (original)
+++ llvm/trunk/lib/Analysis/BlockFrequencyInfo.cpp Fri Apr 18 12:22:25 2014
@@ -11,6 +11,7 @@
//
//===----------------------------------------------------------------------===//
+#define DEBUG_TYPE "block-freq"
#include "llvm/Analysis/BlockFrequencyInfo.h"
#include "llvm/Analysis/BlockFrequencyInfoImpl.h"
#include "llvm/Analysis/BranchProbabilityInfo.h"
@@ -106,6 +107,7 @@ struct DOTGraphTraits<BlockFrequencyInfo
INITIALIZE_PASS_BEGIN(BlockFrequencyInfo, "block-freq",
"Block Frequency Analysis", true, true)
INITIALIZE_PASS_DEPENDENCY(BranchProbabilityInfo)
+INITIALIZE_PASS_DEPENDENCY(LoopInfo)
INITIALIZE_PASS_END(BlockFrequencyInfo, "block-freq",
"Block Frequency Analysis", true, true)
@@ -120,14 +122,16 @@ BlockFrequencyInfo::~BlockFrequencyInfo(
void BlockFrequencyInfo::getAnalysisUsage(AnalysisUsage &AU) const {
AU.addRequired<BranchProbabilityInfo>();
+ AU.addRequired<LoopInfo>();
AU.setPreservesAll();
}
bool BlockFrequencyInfo::runOnFunction(Function &F) {
BranchProbabilityInfo &BPI = getAnalysis<BranchProbabilityInfo>();
+ LoopInfo &LI = getAnalysis<LoopInfo>();
if (!BFI)
BFI.reset(new ImplType);
- BFI->doFunction(&F, &BPI);
+ BFI->doFunction(&F, &BPI, &LI);
#ifndef NDEBUG
if (ViewBlockFreqPropagationDAG != GVDT_None)
view();
@@ -158,7 +162,7 @@ void BlockFrequencyInfo::view() const {
}
const Function *BlockFrequencyInfo::getFunction() const {
- return BFI ? BFI->Fn : nullptr;
+ return BFI ? BFI->getFunction() : nullptr;
}
raw_ostream &BlockFrequencyInfo::
Added: llvm/trunk/lib/Analysis/BlockFrequencyInfoImpl.cpp
URL: http://llvm.org/viewvc/llvm-project/llvm/trunk/lib/Analysis/BlockFrequencyInfoImpl.cpp?rev=206622&view=auto
==============================================================================
--- llvm/trunk/lib/Analysis/BlockFrequencyInfoImpl.cpp (added)
+++ llvm/trunk/lib/Analysis/BlockFrequencyInfoImpl.cpp Fri Apr 18 12:22:25 2014
@@ -0,0 +1,931 @@
+//===- BlockFrequencyImplInfo.cpp - Block Frequency Info Implementation ---===//
+//
+// The LLVM Compiler Infrastructure
+//
+// This file is distributed under the University of Illinois Open Source
+// License. See LICENSE.TXT for details.
+//
+//===----------------------------------------------------------------------===//
+//
+// Loops should be simplified before this analysis.
+//
+//===----------------------------------------------------------------------===//
+
+#define DEBUG_TYPE "block-freq"
+#include "llvm/Analysis/BlockFrequencyInfoImpl.h"
+#include "llvm/ADT/APFloat.h"
+#include "llvm/Support/raw_ostream.h"
+#include <deque>
+
+using namespace llvm;
+
+//===----------------------------------------------------------------------===//
+//
+// PositiveFloat implementation.
+//
+//===----------------------------------------------------------------------===//
+const int PositiveFloatBase::MaxExponent;
+const int PositiveFloatBase::MinExponent;
+
+static void appendDigit(std::string &Str, unsigned D) {
+ assert(D < 10);
+ Str += '0' + D % 10;
+}
+
+static void appendNumber(std::string &Str, uint64_t N) {
+ while (N) {
+ appendDigit(Str, N % 10);
+ N /= 10;
+ }
+}
+
+static bool doesRoundUp(char Digit) {
+ switch (Digit) {
+ case '5':
+ case '6':
+ case '7':
+ case '8':
+ case '9':
+ return true;
+ default:
+ return false;
+ }
+}
+
+static std::string toStringAPFloat(uint64_t D, int E, unsigned Precision) {
+ assert(E >= PositiveFloatBase::MinExponent);
+ assert(E <= PositiveFloatBase::MaxExponent);
+
+ // Find a new E, but don't let it increase past MaxExponent.
+ int LeadingZeros = PositiveFloatBase::countLeadingZeros64(D);
+ int NewE = std::min(PositiveFloatBase::MaxExponent, E + 63 - LeadingZeros);
+ int Shift = 63 - (NewE - E);
+ assert(Shift <= LeadingZeros);
+ assert(Shift == LeadingZeros || NewE == PositiveFloatBase::MaxExponent);
+ D <<= Shift;
+ E = NewE;
+
+ // Check for a denormal.
+ unsigned AdjustedE = E + 16383;
+ if (!(D >> 63)) {
+ assert(E == PositiveFloatBase::MaxExponent);
+ AdjustedE = 0;
+ }
+
+ // Build the float and print it.
+ uint64_t RawBits[2] = {D, AdjustedE};
+ APFloat Float(APFloat::x87DoubleExtended, APInt(80, RawBits));
+ SmallVector<char, 24> Chars;
+ Float.toString(Chars, Precision, 0);
+ return std::string(Chars.begin(), Chars.end());
+}
+
+static std::string stripTrailingZeros(std::string Float) {
+ size_t NonZero = Float.find_last_not_of('0');
+ assert(NonZero != std::string::npos && "no . in floating point string");
+
+ if (Float[NonZero] == '.')
+ ++NonZero;
+
+ return Float.substr(0, NonZero + 1);
+}
+
+std::string PositiveFloatBase::toString(uint64_t D, int16_t E, int Width,
+ unsigned Precision) {
+ if (!D)
+ return "0.0";
+
+ // Canonicalize exponent and digits.
+ uint64_t Above0 = 0;
+ uint64_t Below0 = 0;
+ uint64_t Extra = 0;
+ int ExtraShift = 0;
+ if (E == 0) {
+ Above0 = D;
+ } else if (E > 0) {
+ if (int Shift = std::min(int16_t(countLeadingZeros64(D)), E)) {
+ D <<= Shift;
+ E -= Shift;
+
+ if (!E)
+ Above0 = D;
+ }
+ } else if (E > -64) {
+ Above0 = D >> -E;
+ Below0 = D << (64 + E);
+ } else if (E > -120) {
+ Below0 = D >> (-E - 64);
+ Extra = D << (128 + E);
+ ExtraShift = -64 - E;
+ }
+
+ // Fall back on APFloat for very small and very large numbers.
+ if (!Above0 && !Below0)
+ return toStringAPFloat(D, E, Precision);
+
+ // Append the digits before the decimal.
+ std::string Str;
+ size_t DigitsOut = 0;
+ if (Above0) {
+ appendNumber(Str, Above0);
+ DigitsOut = Str.size();
+ } else
+ appendDigit(Str, 0);
+ std::reverse(Str.begin(), Str.end());
+
+ // Return early if there's nothing after the decimal.
+ if (!Below0)
+ return Str + ".0";
+
+ // Append the decimal and beyond.
+ Str += '.';
+ uint64_t Error = UINT64_C(1) << (64 - Width);
+
+ // We need to shift Below0 to the right to make space for calculating
+ // digits. Save the precision we're losing in Extra.
+ Extra = (Below0 & 0xf) << 56 | (Extra >> 8);
+ Below0 >>= 4;
+ size_t SinceDot = 0;
+ size_t AfterDot = Str.size();
+ do {
+ if (ExtraShift) {
+ --ExtraShift;
+ Error *= 5;
+ } else
+ Error *= 10;
+
+ Below0 *= 10;
+ Extra *= 10;
+ Below0 += (Extra >> 60);
+ Extra = Extra & (UINT64_MAX >> 4);
+ appendDigit(Str, Below0 >> 60);
+ Below0 = Below0 & (UINT64_MAX >> 4);
+ if (DigitsOut || Str.back() != '0')
+ ++DigitsOut;
+ ++SinceDot;
+ } while (Error && (Below0 << 4 | Extra >> 60) >= Error / 2 &&
+ (!Precision || DigitsOut <= Precision || SinceDot < 2));
+
+ // Return early for maximum precision.
+ if (!Precision || DigitsOut <= Precision)
+ return stripTrailingZeros(Str);
+
+ // Find where to truncate.
+ size_t Truncate =
+ std::max(Str.size() - (DigitsOut - Precision), AfterDot + 1);
+
+ // Check if there's anything to truncate.
+ if (Truncate >= Str.size())
+ return stripTrailingZeros(Str);
+
+ bool Carry = doesRoundUp(Str[Truncate]);
+ if (!Carry)
+ return stripTrailingZeros(Str.substr(0, Truncate));
+
+ // Round with the first truncated digit.
+ for (std::string::reverse_iterator I(Str.begin() + Truncate), E = Str.rend();
+ I != E; ++I) {
+ if (*I == '.')
+ continue;
+ if (*I == '9') {
+ *I = '0';
+ continue;
+ }
+
+ ++*I;
+ Carry = false;
+ break;
+ }
+
+ // Add "1" in front if we still need to carry.
+ return stripTrailingZeros(std::string(Carry, '1') + Str.substr(0, Truncate));
+}
+
+raw_ostream &PositiveFloatBase::print(raw_ostream &OS, uint64_t D, int16_t E,
+ int Width, unsigned Precision) {
+ return OS << toString(D, E, Width, Precision);
+}
+
+void PositiveFloatBase::dump(uint64_t D, int16_t E, int Width) {
+ print(dbgs(), D, E, Width, 0) << "[" << Width << ":" << D << "*2^" << E
+ << "]";
+}
+
+static std::pair<uint64_t, int16_t>
+getRoundedFloat(uint64_t N, bool ShouldRound, int64_t Shift) {
+ if (ShouldRound)
+ if (!++N)
+ // Rounding caused an overflow.
+ return std::make_pair(UINT64_C(1), Shift + 64);
+ return std::make_pair(N, Shift);
+}
+
+std::pair<uint64_t, int16_t> PositiveFloatBase::divide64(uint64_t Dividend,
+ uint64_t Divisor) {
+ // Input should be sanitized.
+ assert(Divisor);
+ assert(Dividend);
+
+ // Minimize size of divisor.
+ int16_t Shift = 0;
+ if (int Zeros = countTrailingZeros(Divisor)) {
+ Shift -= Zeros;
+ Divisor >>= Zeros;
+ }
+
+ // Check for powers of two.
+ if (Divisor == 1)
+ return std::make_pair(Dividend, Shift);
+
+ // Maximize size of dividend.
+ if (int Zeros = countLeadingZeros64(Dividend)) {
+ Shift -= Zeros;
+ Dividend <<= Zeros;
+ }
+
+ // Start with the result of a divide.
+ uint64_t Quotient = Dividend / Divisor;
+ Dividend %= Divisor;
+
+ // Continue building the quotient with long division.
+ //
+ // TODO: continue with largers digits.
+ while (!(Quotient >> 63) && Dividend) {
+ // Shift Dividend, and check for overflow.
+ bool IsOverflow = Dividend >> 63;
+ Dividend <<= 1;
+ --Shift;
+
+ // Divide.
+ bool DoesDivide = IsOverflow || Divisor <= Dividend;
+ Quotient = (Quotient << 1) | uint64_t(DoesDivide);
+ Dividend -= DoesDivide ? Divisor : 0;
+ }
+
+ // Round.
+ if (Dividend >= getHalf(Divisor))
+ if (!++Quotient)
+ // Rounding caused an overflow in Quotient.
+ return std::make_pair(UINT64_C(1), Shift + 64);
+
+ return getRoundedFloat(Quotient, Dividend >= getHalf(Divisor), Shift);
+}
+
+static void addWithCarry(uint64_t &Upper, uint64_t &Lower, uint64_t N) {
+ uint64_t NewLower = Lower + (N << 32);
+ Upper += (N >> 32) + (NewLower < Lower);
+ Lower = NewLower;
+}
+
+std::pair<uint64_t, int16_t> PositiveFloatBase::multiply64(uint64_t L,
+ uint64_t R) {
+ // Separate into two 32-bit digits (U.L).
+ uint64_t UL = L >> 32, LL = L & UINT32_MAX, UR = R >> 32, LR = R & UINT32_MAX;
+
+ // Compute cross products.
+ uint64_t P1 = UL * UR, P2 = UL * LR, P3 = LL * UR, P4 = LL * LR;
+
+ // Sum into two 64-bit digits.
+ uint64_t Upper = P1, Lower = P4;
+ addWithCarry(Upper, Lower, P2);
+ addWithCarry(Upper, Lower, P3);
+
+ // Check for the lower 32 bits.
+ if (!Upper)
+ return std::make_pair(Lower, 0);
+
+ // Shift as little as possible to maximize precision.
+ unsigned LeadingZeros = countLeadingZeros64(Upper);
+ int16_t Shift = 64 - LeadingZeros;
+ if (LeadingZeros)
+ Upper = Upper << LeadingZeros | Lower >> Shift;
+ bool ShouldRound = Shift && (Lower & UINT64_C(1) << (Shift - 1));
+ return getRoundedFloat(Upper, ShouldRound, Shift);
+}
+
+//===----------------------------------------------------------------------===//
+//
+// BlockMass implementation.
+//
+//===----------------------------------------------------------------------===//
+BlockMass &BlockMass::operator*=(const BranchProbability &P) {
+ uint32_t N = P.getNumerator(), D = P.getDenominator();
+ assert(D || "divide by 0");
+ assert(N <= D || "fraction greater than 1");
+
+ // Fast path for multiplying by 1.0.
+ if (!Mass || N == D)
+ return *this;
+
+ // Get as much precision as we can.
+ int Shift = countLeadingZeros(Mass);
+ uint64_t ShiftedQuotient = (Mass << Shift) / D;
+ uint64_t Product = ShiftedQuotient * N >> Shift;
+
+ // Now check for what's lost.
+ uint64_t Left = ShiftedQuotient * (D - N) >> Shift;
+ uint64_t Lost = Mass - Product - Left;
+
+ // TODO: prove this assertion.
+ assert(Lost <= UINT32_MAX);
+
+ // Take the product plus a portion of the spoils.
+ Mass = Product + Lost * N / D;
+ return *this;
+}
+
+PositiveFloat<uint64_t> BlockMass::toFloat() const {
+ if (isFull())
+ return PositiveFloat<uint64_t>(1, 0);
+ return PositiveFloat<uint64_t>(getMass() + 1, -64);
+}
+
+void BlockMass::dump() const { print(dbgs()); }
+
+static char getHexDigit(int N) {
+ assert(N < 16);
+ if (N < 10)
+ return '0' + N;
+ return 'a' + N - 10;
+}
+raw_ostream &BlockMass::print(raw_ostream &OS) const {
+ for (int Digits = 0; Digits < 16; ++Digits)
+ OS << getHexDigit(Mass >> (60 - Digits * 4) & 0xf);
+ return OS;
+}
+
+//===----------------------------------------------------------------------===//
+//
+// BlockFrequencyInfoImpl implementation.
+//
+//===----------------------------------------------------------------------===//
+namespace {
+
+typedef BlockFrequencyInfoImplBase::BlockNode BlockNode;
+typedef BlockFrequencyInfoImplBase::Distribution Distribution;
+typedef BlockFrequencyInfoImplBase::Distribution::WeightList WeightList;
+typedef BlockFrequencyInfoImplBase::Float Float;
+typedef BlockFrequencyInfoImplBase::PackagedLoopData PackagedLoopData;
+typedef BlockFrequencyInfoImplBase::Weight Weight;
+typedef BlockFrequencyInfoImplBase::FrequencyData FrequencyData;
+
+/// \brief Dithering mass distributer.
+///
+/// This class splits up a single mass into portions by weight, dithering to
+/// spread out error. No mass is lost. The dithering precision depends on the
+/// precision of the product of \a BlockMass and \a BranchProbability.
+///
+/// The distribution algorithm follows.
+///
+/// 1. Initialize by saving the sum of the weights in \a RemWeight and the
+/// mass to distribute in \a RemMass.
+///
+/// 2. For each portion:
+///
+/// 1. Construct a branch probability, P, as the portion's weight divided
+/// by the current value of \a RemWeight.
+/// 2. Calculate the portion's mass as \a RemMass times P.
+/// 3. Update \a RemWeight and \a RemMass at each portion by subtracting
+/// the current portion's weight and mass.
+///
+/// Mass is distributed in two ways: full distribution and forward
+/// distribution. The latter ignores backedges, and uses the parallel fields
+/// \a RemForwardWeight and \a RemForwardMass.
+struct DitheringDistributer {
+ uint32_t RemWeight;
+ uint32_t RemForwardWeight;
+
+ BlockMass RemMass;
+ BlockMass RemForwardMass;
+
+ DitheringDistributer(Distribution &Dist, const BlockMass &Mass);
+
+ BlockMass takeLocalMass(uint32_t Weight) {
+ (void)takeMass(Weight);
+ return takeForwardMass(Weight);
+ }
+ BlockMass takeExitMass(uint32_t Weight) {
+ (void)takeForwardMass(Weight);
+ return takeMass(Weight);
+ }
+ BlockMass takeBackedgeMass(uint32_t Weight) { return takeMass(Weight); }
+
+private:
+ BlockMass takeForwardMass(uint32_t Weight);
+ BlockMass takeMass(uint32_t Weight);
+};
+}
+
+DitheringDistributer::DitheringDistributer(Distribution &Dist,
+ const BlockMass &Mass) {
+ Dist.normalize();
+ RemWeight = Dist.Total;
+ RemForwardWeight = Dist.ForwardTotal;
+ RemMass = Mass;
+ RemForwardMass = Dist.ForwardTotal ? Mass : BlockMass();
+}
+
+BlockMass DitheringDistributer::takeForwardMass(uint32_t Weight) {
+ // Compute the amount of mass to take.
+ assert(Weight && "invalid weight");
+ assert(Weight <= RemForwardWeight);
+ BlockMass Mass = RemForwardMass * BranchProbability(Weight, RemForwardWeight);
+
+ // Decrement totals (dither).
+ RemForwardWeight -= Weight;
+ RemForwardMass -= Mass;
+ return Mass;
+}
+BlockMass DitheringDistributer::takeMass(uint32_t Weight) {
+ assert(Weight && "invalid weight");
+ assert(Weight <= RemWeight);
+ BlockMass Mass = RemMass * BranchProbability(Weight, RemWeight);
+
+ // Decrement totals (dither).
+ RemWeight -= Weight;
+ RemMass -= Mass;
+ return Mass;
+}
+
+void Distribution::add(const BlockNode &Node, uint64_t Amount,
+ Weight::DistType Type) {
+ assert(Amount && "invalid weight of 0");
+ uint64_t NewTotal = Total + Amount;
+
+ // Check for overflow. It should be impossible to overflow twice.
+ bool IsOverflow = NewTotal < Total;
+ assert(!(DidOverflow && IsOverflow) && "unexpected repeated overflow");
+ DidOverflow |= IsOverflow;
+
+ // Update the total.
+ Total = NewTotal;
+
+ // Save the weight.
+ Weight W;
+ W.TargetNode = Node;
+ W.Amount = Amount;
+ W.Type = Type;
+ Weights.push_back(W);
+
+ if (Type == Weight::Backedge)
+ return;
+
+ // Update forward total. Don't worry about overflow here, since then Total
+ // will exceed 32-bits and they'll both be recomputed in normalize().
+ ForwardTotal += Amount;
+}
+
+static void combineWeight(Weight &W, const Weight &OtherW) {
+ assert(OtherW.TargetNode.isValid());
+ if (!W.Amount) {
+ W = OtherW;
+ return;
+ }
+ assert(W.Type == OtherW.Type);
+ assert(W.TargetNode == OtherW.TargetNode);
+ assert(W.Amount < W.Amount + OtherW.Amount);
+ W.Amount += OtherW.Amount;
+}
+static void combineWeightsBySorting(WeightList &Weights) {
+ // Sort so edges to the same node are adjacent.
+ std::sort(Weights.begin(), Weights.end(),
+ [](const Weight &L,
+ const Weight &R) { return L.TargetNode < R.TargetNode; });
+
+ // Combine adjacent edges.
+ WeightList::iterator O = Weights.begin();
+ for (WeightList::const_iterator I = O, L = O, E = Weights.end(); I != E;
+ ++O, (I = L)) {
+ *O = *I;
+
+ // Find the adjacent weights to the same node.
+ for (++L; L != E && I->TargetNode == L->TargetNode; ++L)
+ combineWeight(*O, *L);
+ }
+
+ // Erase extra entries.
+ Weights.erase(O, Weights.end());
+ return;
+}
+static void combineWeightsByHashing(WeightList &Weights) {
+ // Collect weights into a DenseMap.
+ typedef DenseMap<BlockNode::IndexType, Weight> HashTable;
+ HashTable Combined(NextPowerOf2(2 * Weights.size()));
+ for (const Weight &W : Weights)
+ combineWeight(Combined[W.TargetNode.Index], W);
+
+ // Check whether anything changed.
+ if (Weights.size() == Combined.size())
+ return;
+
+ // Fill in the new weights.
+ Weights.clear();
+ Weights.reserve(Combined.size());
+ for (const auto &I : Combined)
+ Weights.push_back(I.second);
+}
+static void combineWeights(WeightList &Weights) {
+ // Use a hash table for many successors to keep this linear.
+ if (Weights.size() > 128) {
+ combineWeightsByHashing(Weights);
+ return;
+ }
+
+ combineWeightsBySorting(Weights);
+}
+static uint64_t shiftRightAndRound(uint64_t N, int Shift) {
+ assert(Shift >= 0);
+ assert(Shift < 64);
+ if (!Shift)
+ return N;
+ return (N >> Shift) + (UINT64_C(1) & N >> (Shift - 1));
+}
+void Distribution::normalize() {
+ // Early exit for termination nodes.
+ if (Weights.empty())
+ return;
+
+ // Only bother if there are multiple successors.
+ if (Weights.size() > 1)
+ combineWeights(Weights);
+
+ // Early exit when combined into a single successor.
+ if (Weights.size() == 1) {
+ Total = 1;
+ ForwardTotal = Weights.front().Type != Weight::Backedge;
+ Weights.front().Amount = 1;
+ return;
+ }
+
+ // Determine how much to shift right so that the total fits into 32-bits.
+ //
+ // If we shift at all, shift by 1 extra. Otherwise, the lower limit of 1
+ // for each weight can cause a 32-bit overflow.
+ int Shift = 0;
+ if (DidOverflow)
+ Shift = 33;
+ else if (Total > UINT32_MAX)
+ Shift = 33 - countLeadingZeros(Total);
+
+ // Early exit if nothing needs to be scaled.
+ if (!Shift)
+ return;
+
+ // Recompute the total through accumulation (rather than shifting it) so that
+ // it's accurate after shifting. ForwardTotal is dirty here anyway.
+ Total = 0;
+ ForwardTotal = 0;
+
+ // Sum the weights to each node and shift right if necessary.
+ for (Weight &W : Weights) {
+ // Scale down below UINT32_MAX. Since Shift is larger than necessary, we
+ // can round here without concern about overflow.
+ assert(W.TargetNode.isValid());
+ W.Amount = std::max(UINT64_C(1), shiftRightAndRound(W.Amount, Shift));
+ assert(W.Amount <= UINT32_MAX);
+
+ // Update the total.
+ Total += W.Amount;
+ if (W.Type == Weight::Backedge)
+ continue;
+
+ // Update the forward total.
+ ForwardTotal += W.Amount;
+ }
+ assert(Total <= UINT32_MAX);
+}
+
+void BlockFrequencyInfoImplBase::clear() {
+ *this = BlockFrequencyInfoImplBase();
+}
+
+/// \brief Clear all memory not needed downstream.
+///
+/// Releases all memory not used downstream. In particular, saves Freqs.
+static void cleanup(BlockFrequencyInfoImplBase &BFI) {
+ std::vector<FrequencyData> SavedFreqs(std::move(BFI.Freqs));
+ BFI.clear();
+ BFI.Freqs = std::move(SavedFreqs);
+}
+
+/// \brief Get a possibly packaged node.
+///
+/// Get the node currently representing Node, which could be a containing
+/// loop.
+///
+/// This function should only be called when distributing mass. As long as
+/// there are no irreducilbe edges to Node, then it will have complexity O(1)
+/// in this context.
+///
+/// In general, the complexity is O(L), where L is the number of loop headers
+/// Node has been packaged into. Since this method is called in the context
+/// of distributing mass, L will be the number of loop headers an early exit
+/// edge jumps out of.
+static BlockNode getPackagedNode(const BlockFrequencyInfoImplBase &BFI,
+ const BlockNode &Node) {
+ assert(Node.isValid());
+ if (!BFI.Working[Node.Index].IsPackaged)
+ return Node;
+ if (!BFI.Working[Node.Index].ContainingLoop.isValid())
+ return Node;
+ return getPackagedNode(BFI, BFI.Working[Node.Index].ContainingLoop);
+}
+
+/// \brief Get the appropriate mass for a possible pseudo-node loop package.
+///
+/// Get appropriate mass for Node. If Node is a loop-header (whose loop has
+/// been packaged), returns the mass of its pseudo-node. If it's a node inside
+/// a packaged loop, it returns the loop's pseudo-node.
+static BlockMass &getPackageMass(BlockFrequencyInfoImplBase &BFI,
+ const BlockNode &Node) {
+ assert(Node.isValid());
+ assert(!BFI.Working[Node.Index].IsPackaged);
+ if (!BFI.Working[Node.Index].IsAPackage)
+ return BFI.Working[Node.Index].Mass;
+
+ return BFI.getLoopPackage(Node).Mass;
+}
+
+void BlockFrequencyInfoImplBase::addToDist(Distribution &Dist,
+ const BlockNode &LoopHead,
+ const BlockNode &Pred,
+ const BlockNode &Succ,
+ uint64_t Weight) {
+ if (!Weight)
+ Weight = 1;
+
+#ifndef NDEBUG
+ auto debugSuccessor = [&](const char *Type, const BlockNode &Resolved) {
+ dbgs() << " =>"
+ << " [" << Type << "] weight = " << Weight;
+ if (Succ != LoopHead)
+ dbgs() << ", succ = " << getBlockName(Succ);
+ if (Resolved != Succ)
+ dbgs() << ", resolved = " << getBlockName(Resolved);
+ dbgs() << "\n";
+ };
+ (void)debugSuccessor;
+#endif
+
+ if (Succ == LoopHead) {
+ DEBUG(debugSuccessor("backedge", Succ));
+ Dist.addBackedge(LoopHead, Weight);
+ return;
+ }
+ BlockNode Resolved = getPackagedNode(*this, Succ);
+ assert(Resolved != LoopHead);
+
+ if (Working[Resolved.Index].ContainingLoop != LoopHead) {
+ DEBUG(debugSuccessor(" exit ", Resolved));
+ Dist.addExit(Resolved, Weight);
+ return;
+ }
+
+ if (!LoopHead.isValid() && Resolved < Pred) {
+ // Irreducible backedge. Skip this edge in the distribution.
+ DEBUG(debugSuccessor("skipped ", Resolved));
+ return;
+ }
+
+ DEBUG(debugSuccessor(" local ", Resolved));
+ Dist.addLocal(Resolved, Weight);
+}
+
+void BlockFrequencyInfoImplBase::addLoopSuccessorsToDist(
+ const BlockNode &LoopHead, const BlockNode &LocalLoopHead,
+ Distribution &Dist) {
+ PackagedLoopData &LoopPackage = getLoopPackage(LocalLoopHead);
+ const PackagedLoopData::ExitMap &Exits = LoopPackage.Exits;
+
+ // Copy the exit map into Dist.
+ for (const auto &I : Exits)
+ addToDist(Dist, LoopHead, LocalLoopHead, I.first, I.second.getMass());
+
+ // We don't need this map any more. Clear it to prevent quadratic memory
+ // usage in deeply nested loops with irreducible control flow.
+ LoopPackage.Exits.clear();
+}
+
+/// \brief Get the maximum allowed loop scale.
+///
+/// Gives the maximum number of estimated iterations allowed for a loop.
+/// Downstream users have trouble with very large numbers (even within
+/// 64-bits). Perhaps they can be changed to use PositiveFloat.
+///
+/// TODO: change downstream users so that this can be increased or removed.
+static Float getMaxLoopScale() { return Float(1, 12); }
+
+/// \brief Compute the loop scale for a loop.
+void BlockFrequencyInfoImplBase::computeLoopScale(const BlockNode &LoopHead) {
+ // Compute loop scale.
+ DEBUG(dbgs() << "compute-loop-scale: " << getBlockName(LoopHead) << "\n");
+
+ // LoopScale == 1 / ExitMass
+ // ExitMass == HeadMass - BackedgeMass
+ PackagedLoopData &LoopPackage = getLoopPackage(LoopHead);
+ BlockMass ExitMass = BlockMass::getFull() - LoopPackage.BackedgeMass;
+
+ // Block scale stores the inverse of the scale.
+ LoopPackage.Scale = ExitMass.toFloat().inverse();
+
+ DEBUG(dbgs() << " - exit-mass = " << ExitMass << " (" << BlockMass::getFull()
+ << " - " << LoopPackage.BackedgeMass << ")\n"
+ << " - scale = " << LoopPackage.Scale << "\n");
+
+ if (LoopPackage.Scale > getMaxLoopScale()) {
+ LoopPackage.Scale = getMaxLoopScale();
+ DEBUG(dbgs() << " - reduced-to-max-scale: " << getMaxLoopScale() << "\n");
+ }
+}
+
+/// \brief Package up a loop.
+void BlockFrequencyInfoImplBase::packageLoop(const BlockNode &LoopHead) {
+ DEBUG(dbgs() << "packaging-loop: " << getBlockName(LoopHead) << "\n");
+ Working[LoopHead.Index].IsAPackage = true;
+ for (const BlockNode &M : getLoopPackage(LoopHead).Members) {
+ DEBUG(dbgs() << " - node: " << getBlockName(M.Index) << "\n");
+ Working[M.Index].IsPackaged = true;
+ }
+}
+
+void BlockFrequencyInfoImplBase::distributeMass(const BlockNode &Source,
+ const BlockNode &LoopHead,
+ Distribution &Dist) {
+ BlockMass Mass = getPackageMass(*this, Source);
+ DEBUG(dbgs() << " => mass: " << Mass
+ << " ( general | forward )\n");
+
+ // Distribute mass to successors as laid out in Dist.
+ DitheringDistributer D(Dist, Mass);
+
+#ifndef NDEBUG
+ auto debugAssign = [&](const BlockNode &T, const BlockMass &M,
+ const char *Desc) {
+ dbgs() << " => assign " << M << " (" << D.RemMass << "|"
+ << D.RemForwardMass << ")";
+ if (Desc)
+ dbgs() << " [" << Desc << "]";
+ if (T.isValid())
+ dbgs() << " to " << getBlockName(T);
+ dbgs() << "\n";
+ };
+ (void)debugAssign;
+#endif
+
+ PackagedLoopData *LoopPackage = 0;
+ if (LoopHead.isValid())
+ LoopPackage = &getLoopPackage(LoopHead);
+ for (const Weight &W : Dist.Weights) {
+ // Check for a local edge (forward and non-exit).
+ if (W.Type == Weight::Local) {
+ BlockMass Local = D.takeLocalMass(W.Amount);
+ getPackageMass(*this, W.TargetNode) += Local;
+ DEBUG(debugAssign(W.TargetNode, Local, nullptr));
+ continue;
+ }
+
+ // Backedges and exits only make sense if we're processing a loop.
+ assert(LoopPackage && "backedge or exit outside of loop");
+
+ // Check for a backedge.
+ if (W.Type == Weight::Backedge) {
+ BlockMass Back = D.takeBackedgeMass(W.Amount);
+ LoopPackage->BackedgeMass += Back;
+ DEBUG(debugAssign(BlockNode(), Back, "back"));
+ continue;
+ }
+
+ // This must be an exit.
+ assert(W.Type == Weight::Exit);
+ BlockMass Exit = D.takeExitMass(W.Amount);
+ LoopPackage->Exits.push_back(std::make_pair(W.TargetNode, Exit));
+ DEBUG(debugAssign(W.TargetNode, Exit, "exit"));
+ }
+}
+
+static void convertFloatingToInteger(BlockFrequencyInfoImplBase &BFI,
+ const Float &Min, const Float &Max) {
+ // Scale the Factor to a size that creates integers. Ideally, integers would
+ // be scaled so that Max == UINT64_MAX so that they can be best
+ // differentiated. However, the register allocator currently deals poorly
+ // with large numbers. Instead, push Min up a little from 1 to give some
+ // room to differentiate small, unequal numbers.
+ //
+ // TODO: fix issues downstream so that ScalingFactor can be Float(1,64)/Max.
+ Float ScalingFactor = Min.inverse();
+ if ((Max / Min).lg() < 60)
+ ScalingFactor <<= 3;
+
+ // Translate the floats to integers.
+ DEBUG(dbgs() << "float-to-int: min = " << Min << ", max = " << Max
+ << ", factor = " << ScalingFactor << "\n");
+ for (size_t Index = 0; Index < BFI.Freqs.size(); ++Index) {
+ Float Scaled = BFI.Freqs[Index].Floating * ScalingFactor;
+ BFI.Freqs[Index].Integer = std::max(UINT64_C(1), Scaled.toInt<uint64_t>());
+ DEBUG(dbgs() << " - " << BFI.getBlockName(Index) << ": float = "
+ << BFI.Freqs[Index].Floating << ", scaled = " << Scaled
+ << ", int = " << BFI.Freqs[Index].Integer << "\n");
+ }
+}
+
+static void scaleBlockData(BlockFrequencyInfoImplBase &BFI,
+ const BlockNode &Node,
+ const PackagedLoopData &Loop) {
+ Float F = Loop.Mass.toFloat() * Loop.Scale;
+
+ Float &Current = BFI.Freqs[Node.Index].Floating;
+ Float Updated = Current * F;
+
+ DEBUG(dbgs() << " - " << BFI.getBlockName(Node) << ": " << Current << " => "
+ << Updated << "\n");
+
+ Current = Updated;
+}
+
+/// \brief Unwrap a loop package.
+///
+/// Visits all the members of a loop, adjusting their BlockData according to
+/// the loop's pseudo-node.
+static void unwrapLoopPackage(BlockFrequencyInfoImplBase &BFI,
+ const BlockNode &Head) {
+ assert(Head.isValid());
+
+ PackagedLoopData &LoopPackage = BFI.getLoopPackage(Head);
+ DEBUG(dbgs() << "unwrap-loop-package: " << BFI.getBlockName(Head)
+ << ": mass = " << LoopPackage.Mass
+ << ", scale = " << LoopPackage.Scale << "\n");
+ scaleBlockData(BFI, Head, LoopPackage);
+
+ // Propagate the head scale through the loop. Since members are visited in
+ // RPO, the head scale will be updated by the loop scale first, and then the
+ // final head scale will be used for updated the rest of the members.
+ for (const BlockNode &M : LoopPackage.Members) {
+ const FrequencyData &HeadData = BFI.Freqs[Head.Index];
+ FrequencyData &Freqs = BFI.Freqs[M.Index];
+ Float NewFreq = Freqs.Floating * HeadData.Floating;
+ DEBUG(dbgs() << " - " << BFI.getBlockName(M) << ": " << Freqs.Floating
+ << " => " << NewFreq << "\n");
+ Freqs.Floating = NewFreq;
+ }
+}
+
+void BlockFrequencyInfoImplBase::finalizeMetrics() {
+ // Set initial frequencies from loop-local masses.
+ for (size_t Index = 0; Index < Working.size(); ++Index)
+ Freqs[Index].Floating = Working[Index].Mass.toFloat();
+
+ // Unwrap loop packages in reverse post-order, tracking min and max
+ // frequencies.
+ auto Min = Float::getLargest();
+ auto Max = Float::getZero();
+ for (size_t Index = 0; Index < Working.size(); ++Index) {
+ if (Working[Index].isLoopHeader())
+ unwrapLoopPackage(*this, BlockNode(Index));
+
+ // Update max scale.
+ Min = std::min(Min, Freqs[Index].Floating);
+ Max = std::max(Max, Freqs[Index].Floating);
+ }
+
+ // Convert to integers.
+ convertFloatingToInteger(*this, Min, Max);
+
+ // Clean up data structures.
+ cleanup(*this);
+
+ // Print out the final stats.
+ DEBUG(dump());
+}
+
+BlockFrequency
+BlockFrequencyInfoImplBase::getBlockFreq(const BlockNode &Node) const {
+ if (!Node.isValid())
+ return 0;
+ return Freqs[Node.Index].Integer;
+}
+Float
+BlockFrequencyInfoImplBase::getFloatingBlockFreq(const BlockNode &Node) const {
+ if (!Node.isValid())
+ return Float::getZero();
+ return Freqs[Node.Index].Floating;
+}
+
+std::string
+BlockFrequencyInfoImplBase::getBlockName(const BlockNode &Node) const {
+ return std::string();
+}
+
+raw_ostream &
+BlockFrequencyInfoImplBase::printBlockFreq(raw_ostream &OS,
+ const BlockNode &Node) const {
+ return OS << getFloatingBlockFreq(Node);
+}
+
+raw_ostream &
+BlockFrequencyInfoImplBase::printBlockFreq(raw_ostream &OS,
+ const BlockFrequency &Freq) const {
+ Float Block(Freq.getFrequency(), 0);
+ Float Entry(getEntryFreq(), 0);
+
+ return OS << Block / Entry;
+}
Modified: llvm/trunk/lib/Analysis/CMakeLists.txt
URL: http://llvm.org/viewvc/llvm-project/llvm/trunk/lib/Analysis/CMakeLists.txt?rev=206622&r1=206621&r2=206622&view=diff
==============================================================================
--- llvm/trunk/lib/Analysis/CMakeLists.txt (original)
+++ llvm/trunk/lib/Analysis/CMakeLists.txt Fri Apr 18 12:22:25 2014
@@ -7,6 +7,7 @@ add_llvm_library(LLVMAnalysis
Analysis.cpp
BasicAliasAnalysis.cpp
BlockFrequencyInfo.cpp
+ BlockFrequencyInfoImpl.cpp
BranchProbabilityInfo.cpp
CFG.cpp
CFGPrinter.cpp
Modified: llvm/trunk/lib/CodeGen/MachineBlockFrequencyInfo.cpp
URL: http://llvm.org/viewvc/llvm-project/llvm/trunk/lib/CodeGen/MachineBlockFrequencyInfo.cpp?rev=206622&r1=206621&r2=206622&view=diff
==============================================================================
--- llvm/trunk/lib/CodeGen/MachineBlockFrequencyInfo.cpp (original)
+++ llvm/trunk/lib/CodeGen/MachineBlockFrequencyInfo.cpp Fri Apr 18 12:22:25 2014
@@ -11,9 +11,12 @@
//
//===----------------------------------------------------------------------===//
+#define DEBUG_TYPE "block-freq"
#include "llvm/CodeGen/MachineBlockFrequencyInfo.h"
#include "llvm/Analysis/BlockFrequencyInfoImpl.h"
#include "llvm/CodeGen/MachineBranchProbabilityInfo.h"
+#include "llvm/CodeGen/MachineFunction.h"
+#include "llvm/CodeGen/MachineLoopInfo.h"
#include "llvm/CodeGen/Passes.h"
#include "llvm/InitializePasses.h"
#include "llvm/Support/CommandLine.h"
@@ -112,6 +115,7 @@ struct DOTGraphTraits<MachineBlockFreque
INITIALIZE_PASS_BEGIN(MachineBlockFrequencyInfo, "machine-block-freq",
"Machine Block Frequency Analysis", true, true)
INITIALIZE_PASS_DEPENDENCY(MachineBranchProbabilityInfo)
+INITIALIZE_PASS_DEPENDENCY(MachineLoopInfo)
INITIALIZE_PASS_END(MachineBlockFrequencyInfo, "machine-block-freq",
"Machine Block Frequency Analysis", true, true)
@@ -127,16 +131,18 @@ MachineBlockFrequencyInfo::~MachineBlock
void MachineBlockFrequencyInfo::getAnalysisUsage(AnalysisUsage &AU) const {
AU.addRequired<MachineBranchProbabilityInfo>();
+ AU.addRequired<MachineLoopInfo>();
AU.setPreservesAll();
MachineFunctionPass::getAnalysisUsage(AU);
}
bool MachineBlockFrequencyInfo::runOnMachineFunction(MachineFunction &F) {
MachineBranchProbabilityInfo &MBPI =
- getAnalysis<MachineBranchProbabilityInfo>();
+ getAnalysis<MachineBranchProbabilityInfo>();
+ MachineLoopInfo &MLI = getAnalysis<MachineLoopInfo>();
if (!MBFI)
MBFI.reset(new ImplType);
- MBFI->doFunction(&F, &MBPI);
+ MBFI->doFunction(&F, &MBPI, &MLI);
#ifndef NDEBUG
if (ViewMachineBlockFreqPropagationDAG != GVDT_None) {
view();
@@ -166,7 +172,7 @@ getBlockFreq(const MachineBasicBlock *MB
}
const MachineFunction *MachineBlockFrequencyInfo::getFunction() const {
- return MBFI ? MBFI->Fn : nullptr;
+ return MBFI ? MBFI->getFunction() : nullptr;
}
raw_ostream &
Added: llvm/trunk/test/Analysis/BlockFrequencyInfo/bad_input.ll
URL: http://llvm.org/viewvc/llvm-project/llvm/trunk/test/Analysis/BlockFrequencyInfo/bad_input.ll?rev=206622&view=auto
==============================================================================
--- llvm/trunk/test/Analysis/BlockFrequencyInfo/bad_input.ll (added)
+++ llvm/trunk/test/Analysis/BlockFrequencyInfo/bad_input.ll Fri Apr 18 12:22:25 2014
@@ -0,0 +1,50 @@
+; RUN: opt < %s -analyze -block-freq | FileCheck %s
+
+declare void @g(i32 %x)
+
+; CHECK-LABEL: Printing analysis {{.*}} for function 'branch_weight_0':
+; CHECK-NEXT: block-frequency-info: branch_weight_0
+define void @branch_weight_0(i32 %a) {
+; CHECK-NEXT: entry: float = 1.0, int = [[ENTRY:[0-9]+]]
+entry:
+ br label %for.body
+
+; Check that we get 1,4 instead of 0,3.
+; CHECK-NEXT: for.body: float = 4.0,
+for.body:
+ %i = phi i32 [ 0, %entry ], [ %inc, %for.body ]
+ call void @g(i32 %i)
+ %inc = add i32 %i, 1
+ %cmp = icmp ugt i32 %inc, %a
+ br i1 %cmp, label %for.end, label %for.body, !prof !0
+
+; CHECK-NEXT: for.end: float = 1.0, int = [[ENTRY]]
+for.end:
+ ret void
+}
+
+!0 = metadata !{metadata !"branch_weights", i32 0, i32 3}
+
+; CHECK-LABEL: Printing analysis {{.*}} for function 'infinite_loop'
+; CHECK-NEXT: block-frequency-info: infinite_loop
+define void @infinite_loop(i1 %x) {
+; CHECK-NEXT: entry: float = 1.0, int = [[ENTRY:[0-9]+]]
+entry:
+ br i1 %x, label %for.body, label %for.end, !prof !1
+
+; Check that the loop scale maxes out at 4096, giving 2048 here.
+; CHECK-NEXT: for.body: float = 2048.0,
+for.body:
+ %i = phi i32 [ 0, %entry ], [ %inc, %for.body ]
+ call void @g(i32 %i)
+ %inc = add i32 %i, 1
+ br label %for.body
+
+; Check that the exit weight is half of entry, since half is lost in the
+; infinite loop above.
+; CHECK-NEXT: for.end: float = 0.5,
+for.end:
+ ret void
+}
+
+!1 = metadata !{metadata !"branch_weights", i32 1, i32 1}
Modified: llvm/trunk/test/Analysis/BlockFrequencyInfo/basic.ll
URL: http://llvm.org/viewvc/llvm-project/llvm/trunk/test/Analysis/BlockFrequencyInfo/basic.ll?rev=206622&r1=206621&r2=206622&view=diff
==============================================================================
--- llvm/trunk/test/Analysis/BlockFrequencyInfo/basic.ll (original)
+++ llvm/trunk/test/Analysis/BlockFrequencyInfo/basic.ll Fri Apr 18 12:22:25 2014
@@ -1,13 +1,14 @@
; RUN: opt < %s -analyze -block-freq | FileCheck %s
define i32 @test1(i32 %i, i32* %a) {
-; CHECK: Printing analysis {{.*}} for function 'test1'
-; CHECK: entry = 1.0
+; CHECK-LABEL: Printing analysis {{.*}} for function 'test1':
+; CHECK-NEXT: block-frequency-info: test1
+; CHECK-NEXT: entry: float = 1.0, int = [[ENTRY:[0-9]+]]
entry:
br label %body
; Loop backedges are weighted and thus their bodies have a greater frequency.
-; CHECK: body = 32.0
+; CHECK-NEXT: body: float = 32.0,
body:
%iv = phi i32 [ 0, %entry ], [ %next, %body ]
%base = phi i32 [ 0, %entry ], [ %sum, %body ]
@@ -18,29 +19,29 @@ body:
%exitcond = icmp eq i32 %next, %i
br i1 %exitcond, label %exit, label %body
-; CHECK: exit = 1.0
+; CHECK-NEXT: exit: float = 1.0, int = [[ENTRY]]
exit:
ret i32 %sum
}
define i32 @test2(i32 %i, i32 %a, i32 %b) {
-; CHECK: Printing analysis {{.*}} for function 'test2'
-; CHECK: entry = 1.0
+; CHECK-LABEL: Printing analysis {{.*}} for function 'test2':
+; CHECK-NEXT: block-frequency-info: test2
+; CHECK-NEXT: entry: float = 1.0, int = [[ENTRY:[0-9]+]]
entry:
%cond = icmp ult i32 %i, 42
br i1 %cond, label %then, label %else, !prof !0
; The 'then' branch is predicted more likely via branch weight metadata.
-; CHECK: then = 0.94116
+; CHECK-NEXT: then: float = 0.9411{{[0-9]*}},
then:
br label %exit
-; CHECK: else = 0.05877
+; CHECK-NEXT: else: float = 0.05882{{[0-9]*}},
else:
br label %exit
-; FIXME: It may be a bug that we don't sum back to 1.0.
-; CHECK: exit = 0.99993
+; CHECK-NEXT: exit: float = 1.0, int = [[ENTRY]]
exit:
%result = phi i32 [ %a, %then ], [ %b, %else ]
ret i32 %result
@@ -49,37 +50,37 @@ exit:
!0 = metadata !{metadata !"branch_weights", i32 64, i32 4}
define i32 @test3(i32 %i, i32 %a, i32 %b, i32 %c, i32 %d, i32 %e) {
-; CHECK: Printing analysis {{.*}} for function 'test3'
-; CHECK: entry = 1.0
+; CHECK-LABEL: Printing analysis {{.*}} for function 'test3':
+; CHECK-NEXT: block-frequency-info: test3
+; CHECK-NEXT: entry: float = 1.0, int = [[ENTRY:[0-9]+]]
entry:
switch i32 %i, label %case_a [ i32 1, label %case_b
i32 2, label %case_c
i32 3, label %case_d
i32 4, label %case_e ], !prof !1
-; CHECK: case_a = 0.04998
+; CHECK-NEXT: case_a: float = 0.05,
case_a:
br label %exit
-; CHECK: case_b = 0.04998
+; CHECK-NEXT: case_b: float = 0.05,
case_b:
br label %exit
; The 'case_c' branch is predicted more likely via branch weight metadata.
-; CHECK: case_c = 0.79998
+; CHECK-NEXT: case_c: float = 0.8,
case_c:
br label %exit
-; CHECK: case_d = 0.04998
+; CHECK-NEXT: case_d: float = 0.05,
case_d:
br label %exit
-; CHECK: case_e = 0.04998
+; CHECK-NEXT: case_e: float = 0.05,
case_e:
br label %exit
-; FIXME: It may be a bug that we don't sum back to 1.0.
-; CHECK: exit = 0.99993
+; CHECK-NEXT: exit: float = 1.0, int = [[ENTRY]]
exit:
%result = phi i32 [ %a, %case_a ],
[ %b, %case_b ],
@@ -91,44 +92,50 @@ exit:
!1 = metadata !{metadata !"branch_weights", i32 4, i32 4, i32 64, i32 4, i32 4}
-; CHECK: Printing analysis {{.*}} for function 'nested_loops'
-; CHECK: entry = 1.0
-; This test doesn't seem to be assigning sensible frequencies to nested loops.
define void @nested_loops(i32 %a) {
+; CHECK-LABEL: Printing analysis {{.*}} for function 'nested_loops':
+; CHECK-NEXT: block-frequency-info: nested_loops
+; CHECK-NEXT: entry: float = 1.0, int = [[ENTRY:[0-9]+]]
entry:
br label %for.cond1.preheader
+; CHECK-NEXT: for.cond1.preheader: float = 4001.0,
for.cond1.preheader:
%x.024 = phi i32 [ 0, %entry ], [ %inc12, %for.inc11 ]
br label %for.cond4.preheader
+; CHECK-NEXT: for.cond4.preheader: float = 16008001.0,
for.cond4.preheader:
%y.023 = phi i32 [ 0, %for.cond1.preheader ], [ %inc9, %for.inc8 ]
%add = add i32 %y.023, %x.024
br label %for.body6
+; CHECK-NEXT: for.body6: float = 64048012001.0,
for.body6:
%z.022 = phi i32 [ 0, %for.cond4.preheader ], [ %inc, %for.body6 ]
%add7 = add i32 %add, %z.022
- tail call void @g(i32 %add7) #2
+ tail call void @g(i32 %add7)
%inc = add i32 %z.022, 1
%cmp5 = icmp ugt i32 %inc, %a
br i1 %cmp5, label %for.inc8, label %for.body6, !prof !2
+; CHECK-NEXT: for.inc8: float = 16008001.0,
for.inc8:
%inc9 = add i32 %y.023, 1
%cmp2 = icmp ugt i32 %inc9, %a
br i1 %cmp2, label %for.inc11, label %for.cond4.preheader, !prof !2
+; CHECK-NEXT: for.inc11: float = 4001.0,
for.inc11:
%inc12 = add i32 %x.024, 1
%cmp = icmp ugt i32 %inc12, %a
br i1 %cmp, label %for.end13, label %for.cond1.preheader, !prof !2
+; CHECK-NEXT: for.end13: float = 1.0, int = [[ENTRY]]
for.end13:
ret void
}
-declare void @g(i32) #1
+declare void @g(i32)
!2 = metadata !{metadata !"branch_weights", i32 1, i32 4000}
Added: llvm/trunk/test/Analysis/BlockFrequencyInfo/double_exit.ll
URL: http://llvm.org/viewvc/llvm-project/llvm/trunk/test/Analysis/BlockFrequencyInfo/double_exit.ll?rev=206622&view=auto
==============================================================================
--- llvm/trunk/test/Analysis/BlockFrequencyInfo/double_exit.ll (added)
+++ llvm/trunk/test/Analysis/BlockFrequencyInfo/double_exit.ll Fri Apr 18 12:22:25 2014
@@ -0,0 +1,165 @@
+; RUN: opt < %s -analyze -block-freq | FileCheck %s
+
+; CHECK-LABEL: Printing analysis {{.*}} for function 'double_exit':
+; CHECK-NEXT: block-frequency-info: double_exit
+define i32 @double_exit(i32 %N) {
+; Mass = 1
+; Frequency = 1
+; CHECK-NEXT: entry: float = 1.0, int = [[ENTRY:[0-9]+]]
+entry:
+ br label %outer
+
+; Mass = 1
+; Backedge mass = 1/3, exit mass = 2/3
+; Loop scale = 3/2
+; Psuedo-edges = exit
+; Psuedo-mass = 1
+; Frequency = 1*3/2*1 = 3/2
+; CHECK-NEXT: outer: float = 1.5,
+outer:
+ %I.0 = phi i32 [ 0, %entry ], [ %inc6, %outer.inc ]
+ %Return.0 = phi i32 [ 0, %entry ], [ %Return.1, %outer.inc ]
+ %cmp = icmp slt i32 %I.0, %N
+ br i1 %cmp, label %inner, label %exit, !prof !2 ; 2:1
+
+; Mass = 1
+; Backedge mass = 3/5, exit mass = 2/5
+; Loop scale = 5/2
+; Pseudo-edges = outer.inc @ 1/5, exit @ 1/5
+; Pseudo-mass = 2/3
+; Frequency = 3/2*1*5/2*2/3 = 5/2
+; CHECK-NEXT: inner: float = 2.5,
+inner:
+ %Return.1 = phi i32 [ %Return.0, %outer ], [ %call4, %inner.inc ]
+ %J.0 = phi i32 [ %I.0, %outer ], [ %inc, %inner.inc ]
+ %cmp2 = icmp slt i32 %J.0, %N
+ br i1 %cmp2, label %inner.body, label %outer.inc, !prof !1 ; 4:1
+
+; Mass = 4/5
+; Frequency = 5/2*4/5 = 2
+; CHECK-NEXT: inner.body: float = 2.0,
+inner.body:
+ %call = call i32 @c2(i32 %I.0, i32 %J.0)
+ %tobool = icmp ne i32 %call, 0
+ br i1 %tobool, label %exit, label %inner.inc, !prof !0 ; 3:1
+
+; Mass = 3/5
+; Frequency = 5/2*3/5 = 3/2
+; CHECK-NEXT: inner.inc: float = 1.5,
+inner.inc:
+ %call4 = call i32 @logic2(i32 %Return.1, i32 %I.0, i32 %J.0)
+ %inc = add nsw i32 %J.0, 1
+ br label %inner
+
+; Mass = 1/3
+; Frequency = 3/2*1/3 = 1/2
+; CHECK-NEXT: outer.inc: float = 0.5,
+outer.inc:
+ %inc6 = add nsw i32 %I.0, 1
+ br label %outer
+
+; Mass = 1
+; Frequency = 1
+; CHECK-NEXT: exit: float = 1.0, int = [[ENTRY]]
+exit:
+ %Return.2 = phi i32 [ %Return.1, %inner.body ], [ %Return.0, %outer ]
+ ret i32 %Return.2
+}
+
+!0 = metadata !{metadata !"branch_weights", i32 1, i32 3}
+!1 = metadata !{metadata !"branch_weights", i32 4, i32 1}
+!2 = metadata !{metadata !"branch_weights", i32 2, i32 1}
+
+declare i32 @c2(i32, i32)
+declare i32 @logic2(i32, i32, i32)
+
+; CHECK-LABEL: Printing analysis {{.*}} for function 'double_exit_in_loop':
+; CHECK-NEXT: block-frequency-info: double_exit_in_loop
+define i32 @double_exit_in_loop(i32 %N) {
+; Mass = 1
+; Frequency = 1
+; CHECK-NEXT: entry: float = 1.0, int = [[ENTRY:[0-9]+]]
+entry:
+ br label %outer
+
+; Mass = 1
+; Backedge mass = 1/2, exit mass = 1/2
+; Loop scale = 2
+; Pseudo-edges = exit
+; Psuedo-mass = 1
+; Frequency = 1*2*1 = 2
+; CHECK-NEXT: outer: float = 2.0,
+outer:
+ %I.0 = phi i32 [ 0, %entry ], [ %inc12, %outer.inc ]
+ %Return.0 = phi i32 [ 0, %entry ], [ %Return.3, %outer.inc ]
+ %cmp = icmp slt i32 %I.0, %N
+ br i1 %cmp, label %middle, label %exit, !prof !3 ; 1:1
+
+; Mass = 1
+; Backedge mass = 1/3, exit mass = 2/3
+; Loop scale = 3/2
+; Psuedo-edges = outer.inc
+; Psuedo-mass = 1/2
+; Frequency = 2*1*3/2*1/2 = 3/2
+; CHECK-NEXT: middle: float = 1.5,
+middle:
+ %J.0 = phi i32 [ %I.0, %outer ], [ %inc9, %middle.inc ]
+ %Return.1 = phi i32 [ %Return.0, %outer ], [ %Return.2, %middle.inc ]
+ %cmp2 = icmp slt i32 %J.0, %N
+ br i1 %cmp2, label %inner, label %outer.inc, !prof !2 ; 2:1
+
+; Mass = 1
+; Backedge mass = 3/5, exit mass = 2/5
+; Loop scale = 5/2
+; Pseudo-edges = middle.inc @ 1/5, outer.inc @ 1/5
+; Pseudo-mass = 2/3
+; Frequency = 3/2*1*5/2*2/3 = 5/2
+; CHECK-NEXT: inner: float = 2.5,
+inner:
+ %Return.2 = phi i32 [ %Return.1, %middle ], [ %call7, %inner.inc ]
+ %K.0 = phi i32 [ %J.0, %middle ], [ %inc, %inner.inc ]
+ %cmp5 = icmp slt i32 %K.0, %N
+ br i1 %cmp5, label %inner.body, label %middle.inc, !prof !1 ; 4:1
+
+; Mass = 4/5
+; Frequency = 5/2*4/5 = 2
+; CHECK-NEXT: inner.body: float = 2.0,
+inner.body:
+ %call = call i32 @c3(i32 %I.0, i32 %J.0, i32 %K.0)
+ %tobool = icmp ne i32 %call, 0
+ br i1 %tobool, label %outer.inc, label %inner.inc, !prof !0 ; 3:1
+
+; Mass = 3/5
+; Frequency = 5/2*3/5 = 3/2
+; CHECK-NEXT: inner.inc: float = 1.5,
+inner.inc:
+ %call7 = call i32 @logic3(i32 %Return.2, i32 %I.0, i32 %J.0, i32 %K.0)
+ %inc = add nsw i32 %K.0, 1
+ br label %inner
+
+; Mass = 1/3
+; Frequency = 3/2*1/3 = 1/2
+; CHECK-NEXT: middle.inc: float = 0.5,
+middle.inc:
+ %inc9 = add nsw i32 %J.0, 1
+ br label %middle
+
+; Mass = 1/2
+; Frequency = 2*1/2 = 1
+; CHECK-NEXT: outer.inc: float = 1.0,
+outer.inc:
+ %Return.3 = phi i32 [ %Return.2, %inner.body ], [ %Return.1, %middle ]
+ %inc12 = add nsw i32 %I.0, 1
+ br label %outer
+
+; Mass = 1
+; Frequency = 1
+; CHECK-NEXT: exit: float = 1.0, int = [[ENTRY]]
+exit:
+ ret i32 %Return.0
+}
+
+!3 = metadata !{metadata !"branch_weights", i32 1, i32 1}
+
+declare i32 @c3(i32, i32, i32)
+declare i32 @logic3(i32, i32, i32, i32)
Added: llvm/trunk/test/Analysis/BlockFrequencyInfo/irreducible.ll
URL: http://llvm.org/viewvc/llvm-project/llvm/trunk/test/Analysis/BlockFrequencyInfo/irreducible.ll?rev=206622&view=auto
==============================================================================
--- llvm/trunk/test/Analysis/BlockFrequencyInfo/irreducible.ll (added)
+++ llvm/trunk/test/Analysis/BlockFrequencyInfo/irreducible.ll Fri Apr 18 12:22:25 2014
@@ -0,0 +1,197 @@
+; RUN: opt < %s -analyze -block-freq | FileCheck %s
+
+; A loop with multiple exits should be handled correctly.
+;
+; CHECK-LABEL: Printing analysis {{.*}} for function 'multiexit':
+; CHECK-NEXT: block-frequency-info: multiexit
+define void @multiexit(i32 %a) {
+; CHECK-NEXT: entry: float = 1.0, int = [[ENTRY:[0-9]+]]
+entry:
+ br label %loop.1
+
+; CHECK-NEXT: loop.1: float = 1.333{{3*}},
+loop.1:
+ %i = phi i32 [ 0, %entry ], [ %inc.2, %loop.2 ]
+ call void @f(i32 %i)
+ %inc.1 = add i32 %i, 1
+ %cmp.1 = icmp ugt i32 %inc.1, %a
+ br i1 %cmp.1, label %exit.1, label %loop.2, !prof !0
+
+; CHECK-NEXT: loop.2: float = 0.666{{6*7}},
+loop.2:
+ call void @g(i32 %inc.1)
+ %inc.2 = add i32 %inc.1, 1
+ %cmp.2 = icmp ugt i32 %inc.2, %a
+ br i1 %cmp.2, label %exit.2, label %loop.1, !prof !1
+
+; CHECK-NEXT: exit.1: float = 0.666{{6*7}},
+exit.1:
+ call void @h(i32 %inc.1)
+ br label %return
+
+; CHECK-NEXT: exit.2: float = 0.333{{3*}},
+exit.2:
+ call void @i(i32 %inc.2)
+ br label %return
+
+; CHECK-NEXT: return: float = 1.0, int = [[ENTRY]]
+return:
+ ret void
+}
+
+declare void @f(i32 %x)
+declare void @g(i32 %x)
+declare void @h(i32 %x)
+declare void @i(i32 %x)
+
+!0 = metadata !{metadata !"branch_weights", i32 3, i32 3}
+!1 = metadata !{metadata !"branch_weights", i32 5, i32 5}
+
+; The current BlockFrequencyInfo algorithm doesn't handle multiple entrances
+; into a loop very well. The frequencies assigned to blocks in the loop are
+; predictable (and not absurd), but also not correct and therefore not worth
+; testing.
+;
+; There are two testcases below.
+;
+; For each testcase, I use a CHECK-NEXT/NOT combo like an XFAIL with the
+; granularity of a single check. If/when this behaviour is fixed, we'll know
+; about it, and the test should be updated.
+;
+; Testcase #1
+; ===========
+;
+; In this case c1 and c2 should have frequencies of 15/7 and 13/7,
+; respectively. To calculate this, consider assigning 1.0 to entry, and
+; distributing frequency iteratively (to infinity). At the first iteration,
+; entry gives 3/4 to c1 and 1/4 to c2. At every step after, c1 and c2 give 3/4
+; of what they have to each other. Somehow, all of it comes out to exit.
+;
+; c1 = 3/4 + 1/4*3/4 + 3/4*3^2/4^2 + 1/4*3^3/4^3 + 3/4*3^3/4^3 + ...
+; c2 = 1/4 + 3/4*3/4 + 1/4*3^2/4^2 + 3/4*3^3/4^3 + 1/4*3^3/4^3 + ...
+;
+; Simplify by splitting up the odd and even terms of the series and taking out
+; factors so that the infite series matches:
+;
+; c1 = 3/4 *(9^0/16^0 + 9^1/16^1 + 9^2/16^2 + ...)
+; + 3/16*(9^0/16^0 + 9^1/16^1 + 9^2/16^2 + ...)
+; c2 = 1/4 *(9^0/16^0 + 9^1/16^1 + 9^2/16^2 + ...)
+; + 9/16*(9^0/16^0 + 9^1/16^1 + 9^2/16^2 + ...)
+;
+; c1 = 15/16*(9^0/16^0 + 9^1/16^1 + 9^2/16^2 + ...)
+; c2 = 13/16*(9^0/16^0 + 9^1/16^1 + 9^2/16^2 + ...)
+;
+; Since this geometric series sums to 16/7:
+;
+; c1 = 15/7
+; c2 = 13/7
+;
+; If we treat c1 and c2 as members of the same loop, the exit frequency of the
+; loop as a whole is 1/4, so the loop scale should be 4. Summing c1 and c2
+; gives 28/7, or 4.0, which is nice confirmation of the math above.
+;
+; However, assuming c1 precedes c2 in reverse post-order, the current algorithm
+; returns 3/4 and 13/16, respectively. LoopInfo ignores edges between loops
+; (and doesn't see any loops here at all), and -block-freq ignores the
+; irreducible edge from c2 to c1.
+;
+; CHECK-LABEL: Printing analysis {{.*}} for function 'multientry':
+; CHECK-NEXT: block-frequency-info: multientry
+define void @multientry(i32 %a) {
+; CHECK-NEXT: entry: float = 1.0, int = [[ENTRY:[0-9]+]]
+entry:
+ %choose = call i32 @choose(i32 %a)
+ %compare = icmp ugt i32 %choose, %a
+ br i1 %compare, label %c1, label %c2, !prof !2
+
+; This is like a single-line XFAIL (see above).
+; CHECK-NEXT: c1:
+; CHECK-NOT: float = 2.142857{{[0-9]*}},
+c1:
+ %i1 = phi i32 [ %a, %entry ], [ %i2.inc, %c2 ]
+ %i1.inc = add i32 %i1, 1
+ %choose1 = call i32 @choose(i32 %i1)
+ %compare1 = icmp ugt i32 %choose1, %a
+ br i1 %compare1, label %c2, label %exit, !prof !2
+
+; This is like a single-line XFAIL (see above).
+; CHECK-NEXT: c2:
+; CHECK-NOT: float = 1.857142{{[0-9]*}},
+c2:
+ %i2 = phi i32 [ %a, %entry ], [ %i1.inc, %c1 ]
+ %i2.inc = add i32 %i2, 1
+ %choose2 = call i32 @choose(i32 %i2)
+ %compare2 = icmp ugt i32 %choose2, %a
+ br i1 %compare2, label %c1, label %exit, !prof !2
+
+; We still shouldn't lose any frequency.
+; CHECK-NEXT: exit: float = 1.0, int = [[ENTRY]]
+exit:
+ ret void
+}
+
+; Testcase #2
+; ===========
+;
+; In this case c1 and c2 should be treated as equals in a single loop. The
+; exit frequency is 1/3, so the scaling factor for the loop should be 3.0. The
+; loop is entered 2/3 of the time, and c1 and c2 split the total loop frequency
+; evenly (1/2), so they should each have frequencies of 1.0 (3.0*2/3*1/2).
+; Another way of computing this result is by assigning 1.0 to entry and showing
+; that c1 and c2 should accumulate frequencies of:
+;
+; 1/3 + 2/9 + 4/27 + 8/81 + ...
+; 2^0/3^1 + 2^1/3^2 + 2^2/3^3 + 2^3/3^4 + ...
+;
+; At the first step, c1 and c2 each get 1/3 of the entry. At each subsequent
+; step, c1 and c2 each get 1/3 of what's left in c1 and c2 combined. This
+; infinite series sums to 1.
+;
+; However, assuming c1 precedes c2 in reverse post-order, the current algorithm
+; returns 1/2 and 3/4, respectively. LoopInfo ignores edges between loops (and
+; treats c1 and c2 as self-loops only), and -block-freq ignores the irreducible
+; edge from c2 to c1.
+;
+; Below I use a CHECK-NEXT/NOT combo like an XFAIL with the granularity of a
+; single check. If/when this behaviour is fixed, we'll know about it, and the
+; test should be updated.
+;
+; CHECK-LABEL: Printing analysis {{.*}} for function 'crossloops':
+; CHECK-NEXT: block-frequency-info: crossloops
+define void @crossloops(i32 %a) {
+; CHECK-NEXT: entry: float = 1.0, int = [[ENTRY:[0-9]+]]
+entry:
+ %choose = call i32 @choose(i32 %a)
+ switch i32 %choose, label %exit [ i32 1, label %c1
+ i32 2, label %c2 ], !prof !3
+
+; This is like a single-line XFAIL (see above).
+; CHECK-NEXT: c1:
+; CHECK-NOT: float = 1.0,
+c1:
+ %i1 = phi i32 [ %a, %entry ], [ %i1.inc, %c1 ], [ %i2.inc, %c2 ]
+ %i1.inc = add i32 %i1, 1
+ %choose1 = call i32 @choose(i32 %i1)
+ switch i32 %choose1, label %exit [ i32 1, label %c1
+ i32 2, label %c2 ], !prof !3
+
+; This is like a single-line XFAIL (see above).
+; CHECK-NEXT: c2:
+; CHECK-NOT: float = 1.0,
+c2:
+ %i2 = phi i32 [ %a, %entry ], [ %i1.inc, %c1 ], [ %i2.inc, %c2 ]
+ %i2.inc = add i32 %i2, 1
+ %choose2 = call i32 @choose(i32 %i2)
+ switch i32 %choose2, label %exit [ i32 1, label %c1
+ i32 2, label %c2 ], !prof !3
+
+; We still shouldn't lose any frequency.
+; CHECK-NEXT: exit: float = 1.0, int = [[ENTRY]]
+exit:
+ ret void
+}
+
+declare i32 @choose(i32)
+
+!2 = metadata !{metadata !"branch_weights", i32 3, i32 1}
+!3 = metadata !{metadata !"branch_weights", i32 2, i32 2, i32 2}
Added: llvm/trunk/test/Analysis/BlockFrequencyInfo/loop_with_branch.ll
URL: http://llvm.org/viewvc/llvm-project/llvm/trunk/test/Analysis/BlockFrequencyInfo/loop_with_branch.ll?rev=206622&view=auto
==============================================================================
--- llvm/trunk/test/Analysis/BlockFrequencyInfo/loop_with_branch.ll (added)
+++ llvm/trunk/test/Analysis/BlockFrequencyInfo/loop_with_branch.ll Fri Apr 18 12:22:25 2014
@@ -0,0 +1,44 @@
+; RUN: opt < %s -analyze -block-freq | FileCheck %s
+
+; CHECK-LABEL: Printing analysis {{.*}} for function 'loop_with_branch':
+; CHECK-NEXT: block-frequency-info: loop_with_branch
+define void @loop_with_branch(i32 %a) {
+; CHECK-NEXT: entry: float = 1.0, int = [[ENTRY:[0-9]+]]
+entry:
+ %skip_loop = call i1 @foo0(i32 %a)
+ br i1 %skip_loop, label %skip, label %header, !prof !0
+
+; CHECK-NEXT: skip: float = 0.25,
+skip:
+ br label %exit
+
+; CHECK-NEXT: header: float = 4.5,
+header:
+ %i = phi i32 [ 0, %entry ], [ %i.next, %back ]
+ %i.next = add i32 %i, 1
+ %choose = call i2 @foo1(i32 %i)
+ switch i2 %choose, label %exit [ i2 0, label %left
+ i2 1, label %right ], !prof !1
+
+; CHECK-NEXT: left: float = 1.5,
+left:
+ br label %back
+
+; CHECK-NEXT: right: float = 2.25,
+right:
+ br label %back
+
+; CHECK-NEXT: back: float = 3.75,
+back:
+ br label %header
+
+; CHECK-NEXT: exit: float = 1.0, int = [[ENTRY]]
+exit:
+ ret void
+}
+
+declare i1 @foo0(i32)
+declare i2 @foo1(i32)
+
+!0 = metadata !{metadata !"branch_weights", i32 1, i32 3}
+!1 = metadata !{metadata !"branch_weights", i32 1, i32 2, i32 3}
Added: llvm/trunk/test/Analysis/BlockFrequencyInfo/nested_loop_with_branches.ll
URL: http://llvm.org/viewvc/llvm-project/llvm/trunk/test/Analysis/BlockFrequencyInfo/nested_loop_with_branches.ll?rev=206622&view=auto
==============================================================================
--- llvm/trunk/test/Analysis/BlockFrequencyInfo/nested_loop_with_branches.ll (added)
+++ llvm/trunk/test/Analysis/BlockFrequencyInfo/nested_loop_with_branches.ll Fri Apr 18 12:22:25 2014
@@ -0,0 +1,59 @@
+; RUN: opt < %s -analyze -block-freq | FileCheck %s
+
+; CHECK-LABEL: Printing analysis {{.*}} for function 'nested_loop_with_branches'
+; CHECK-NEXT: block-frequency-info: nested_loop_with_branches
+define void @nested_loop_with_branches(i32 %a) {
+; CHECK-NEXT: entry: float = 1.0, int = [[ENTRY:[0-9]+]]
+entry:
+ %v0 = call i1 @foo0(i32 %a)
+ br i1 %v0, label %exit, label %outer, !prof !0
+
+; CHECK-NEXT: outer: float = 12.0,
+outer:
+ %i = phi i32 [ 0, %entry ], [ %i.next, %inner.end ], [ %i.next, %no_inner ]
+ %i.next = add i32 %i, 1
+ %do_inner = call i1 @foo1(i32 %i)
+ br i1 %do_inner, label %no_inner, label %inner, !prof !0
+
+; CHECK-NEXT: inner: float = 36.0,
+inner:
+ %j = phi i32 [ 0, %outer ], [ %j.next, %inner.end ]
+ %side = call i1 @foo3(i32 %j)
+ br i1 %side, label %left, label %right, !prof !0
+
+; CHECK-NEXT: left: float = 9.0,
+left:
+ %v4 = call i1 @foo4(i32 %j)
+ br label %inner.end
+
+; CHECK-NEXT: right: float = 27.0,
+right:
+ %v5 = call i1 @foo5(i32 %j)
+ br label %inner.end
+
+; CHECK-NEXT: inner.end: float = 36.0,
+inner.end:
+ %stay_inner = phi i1 [ %v4, %left ], [ %v5, %right ]
+ %j.next = add i32 %j, 1
+ br i1 %stay_inner, label %inner, label %outer, !prof !1
+
+; CHECK-NEXT: no_inner: float = 3.0,
+no_inner:
+ %continue = call i1 @foo6(i32 %i)
+ br i1 %continue, label %outer, label %exit, !prof !1
+
+; CHECK-NEXT: exit: float = 1.0, int = [[ENTRY]]
+exit:
+ ret void
+}
+
+declare i1 @foo0(i32)
+declare i1 @foo1(i32)
+declare i1 @foo2(i32)
+declare i1 @foo3(i32)
+declare i1 @foo4(i32)
+declare i1 @foo5(i32)
+declare i1 @foo6(i32)
+
+!0 = metadata !{metadata !"branch_weights", i32 1, i32 3}
+!1 = metadata !{metadata !"branch_weights", i32 3, i32 1}
Modified: llvm/trunk/test/CodeGen/XCore/llvm-intrinsics.ll
URL: http://llvm.org/viewvc/llvm-project/llvm/trunk/test/CodeGen/XCore/llvm-intrinsics.ll?rev=206622&r1=206621&r2=206622&view=diff
==============================================================================
--- llvm/trunk/test/CodeGen/XCore/llvm-intrinsics.ll (original)
+++ llvm/trunk/test/CodeGen/XCore/llvm-intrinsics.ll Fri Apr 18 12:22:25 2014
@@ -287,9 +287,8 @@ define void @Unwind1() {
; CHECKFP: .LBB{{[0-9_]+}}
; CHECKFP-NEXT: ldc r2, 40
; CHECKFP-NEXT: add r2, r10, r2
-; CHECKFP-NEXT: add r0, r2, r0
+; CHECKFP-NEXT: add r2, r2, r0
; CHECKFP-NEXT: mov r3, r1
-; CHECKFP-NEXT: mov r2, r0
; CHECKFP-NEXT: ldw r9, r10[4]
; CHECKFP-NEXT: ldw r8, r10[5]
; CHECKFP-NEXT: ldw r7, r10[6]
@@ -337,9 +336,8 @@ define void @Unwind1() {
; CHECK-NEXT: ldc r2, 36
; CHECK-NEXT: ldaw r3, sp[0]
; CHECK-NEXT: add r2, r3, r2
-; CHECK-NEXT: add r0, r2, r0
+; CHECK-NEXT: add r2, r2, r0
; CHECK-NEXT: mov r3, r1
-; CHECK-NEXT: mov r2, r0
; CHECK-NEXT: ldw r10, sp[2]
; CHECK-NEXT: ldw r9, sp[3]
; CHECK-NEXT: ldw r8, sp[4]
More information about the llvm-commits
mailing list