[llvm] r194939 - Add a loop rerolling pass
Hal Finkel
hfinkel at anl.gov
Sat Nov 16 15:59:06 PST 2013
Author: hfinkel
Date: Sat Nov 16 17:59:05 2013
New Revision: 194939
URL: http://llvm.org/viewvc/llvm-project?rev=194939&view=rev
Log:
Add a loop rerolling pass
This adds a loop rerolling pass: the opposite of (partial) loop unrolling. The
transformation aims to take loops like this:
for (int i = 0; i < 3200; i += 5) {
a[i] += alpha * b[i];
a[i + 1] += alpha * b[i + 1];
a[i + 2] += alpha * b[i + 2];
a[i + 3] += alpha * b[i + 3];
a[i + 4] += alpha * b[i + 4];
}
and turn them into this:
for (int i = 0; i < 3200; ++i) {
a[i] += alpha * b[i];
}
and loops like this:
for (int i = 0; i < 500; ++i) {
x[3*i] = foo(0);
x[3*i+1] = foo(0);
x[3*i+2] = foo(0);
}
and turn them into this:
for (int i = 0; i < 1500; ++i) {
x[i] = foo(0);
}
There are two motivations for this transformation:
1. Code-size reduction (especially relevant, obviously, when compiling for
code size).
2. Providing greater choice to the loop vectorizer (and generic unroller) to
choose the unrolling factor (and a better ability to vectorize). The loop
vectorizer can take vector lengths and register pressure into account when
choosing an unrolling factor, for example, and a pre-unrolled loop limits that
choice. This is especially problematic if the manual unrolling was optimized
for a machine different from the current target.
The current implementation is limited to single basic-block loops only. The
rerolling recognition should work regardless of how the loop iterations are
intermixed within the loop body (subject to dependency and side-effect
constraints), but the significant restriction is that the order of the
instructions in each iteration must be identical. This seems sufficient to
capture all current use cases.
This pass is not currently enabled by default at any optimization level.
Added:
llvm/trunk/lib/Transforms/Scalar/LoopRerollPass.cpp
llvm/trunk/test/Transforms/LoopReroll/
llvm/trunk/test/Transforms/LoopReroll/basic.ll
llvm/trunk/test/Transforms/LoopReroll/reduction.ll
Modified:
llvm/trunk/include/llvm-c/Transforms/Scalar.h
llvm/trunk/include/llvm/InitializePasses.h
llvm/trunk/include/llvm/LinkAllPasses.h
llvm/trunk/include/llvm/Transforms/Scalar.h
llvm/trunk/lib/Transforms/IPO/PassManagerBuilder.cpp
llvm/trunk/lib/Transforms/Scalar/CMakeLists.txt
llvm/trunk/lib/Transforms/Scalar/Scalar.cpp
Modified: llvm/trunk/include/llvm-c/Transforms/Scalar.h
URL: http://llvm.org/viewvc/llvm-project/llvm/trunk/include/llvm-c/Transforms/Scalar.h?rev=194939&r1=194938&r2=194939&view=diff
==============================================================================
--- llvm/trunk/include/llvm-c/Transforms/Scalar.h (original)
+++ llvm/trunk/include/llvm-c/Transforms/Scalar.h Sat Nov 16 17:59:05 2013
@@ -65,6 +65,9 @@ void LLVMAddLoopIdiomPass(LLVMPassManage
/** See llvm::createLoopRotatePass function. */
void LLVMAddLoopRotatePass(LLVMPassManagerRef PM);
+/** See llvm::createLoopRerollPass function. */
+void LLVMAddLoopRerollPass(LLVMPassManagerRef PM);
+
/** See llvm::createLoopUnrollPass function. */
void LLVMAddLoopUnrollPass(LLVMPassManagerRef PM);
Modified: llvm/trunk/include/llvm/InitializePasses.h
URL: http://llvm.org/viewvc/llvm-project/llvm/trunk/include/llvm/InitializePasses.h?rev=194939&r1=194938&r2=194939&view=diff
==============================================================================
--- llvm/trunk/include/llvm/InitializePasses.h (original)
+++ llvm/trunk/include/llvm/InitializePasses.h Sat Nov 16 17:59:05 2013
@@ -162,6 +162,7 @@ void initializeLoopRotatePass(PassRegist
void initializeLoopSimplifyPass(PassRegistry&);
void initializeLoopStrengthReducePass(PassRegistry&);
void initializeGlobalMergePass(PassRegistry&);
+void initializeLoopRerollPass(PassRegistry&);
void initializeLoopUnrollPass(PassRegistry&);
void initializeLoopUnswitchPass(PassRegistry&);
void initializeLoopIdiomRecognizePass(PassRegistry&);
Modified: llvm/trunk/include/llvm/LinkAllPasses.h
URL: http://llvm.org/viewvc/llvm-project/llvm/trunk/include/llvm/LinkAllPasses.h?rev=194939&r1=194938&r2=194939&view=diff
==============================================================================
--- llvm/trunk/include/llvm/LinkAllPasses.h (original)
+++ llvm/trunk/include/llvm/LinkAllPasses.h Sat Nov 16 17:59:05 2013
@@ -91,6 +91,7 @@ namespace {
(void) llvm::createLoopExtractorPass();
(void) llvm::createLoopSimplifyPass();
(void) llvm::createLoopStrengthReducePass();
+ (void) llvm::createLoopRerollPass();
(void) llvm::createLoopUnrollPass();
(void) llvm::createLoopUnswitchPass();
(void) llvm::createLoopIdiomPass();
Modified: llvm/trunk/include/llvm/Transforms/Scalar.h
URL: http://llvm.org/viewvc/llvm-project/llvm/trunk/include/llvm/Transforms/Scalar.h?rev=194939&r1=194938&r2=194939&view=diff
==============================================================================
--- llvm/trunk/include/llvm/Transforms/Scalar.h (original)
+++ llvm/trunk/include/llvm/Transforms/Scalar.h Sat Nov 16 17:59:05 2013
@@ -145,6 +145,12 @@ Pass *createLoopUnrollPass(int Threshold
//===----------------------------------------------------------------------===//
//
+// LoopReroll - This pass is a simple loop rerolling pass.
+//
+Pass *createLoopRerollPass();
+
+//===----------------------------------------------------------------------===//
+//
// LoopRotate - This pass is a simple loop rotating pass.
//
Pass *createLoopRotatePass();
Modified: llvm/trunk/lib/Transforms/IPO/PassManagerBuilder.cpp
URL: http://llvm.org/viewvc/llvm-project/llvm/trunk/lib/Transforms/IPO/PassManagerBuilder.cpp?rev=194939&r1=194938&r2=194939&view=diff
==============================================================================
--- llvm/trunk/lib/Transforms/IPO/PassManagerBuilder.cpp (original)
+++ llvm/trunk/lib/Transforms/IPO/PassManagerBuilder.cpp Sat Nov 16 17:59:05 2013
@@ -54,6 +54,10 @@ static cl::opt<bool> UseNewSROA("use-new
cl::init(true), cl::Hidden,
cl::desc("Enable the new, experimental SROA pass"));
+static cl::opt<bool>
+RunLoopRerolling("reroll-loops", cl::Hidden,
+ cl::desc("Run the loop rerolling pass"));
+
PassManagerBuilder::PassManagerBuilder() {
OptLevel = 2;
SizeLevel = 0;
@@ -216,6 +220,8 @@ void PassManagerBuilder::populateModuleP
addExtensionsToPM(EP_ScalarOptimizerLate, MPM);
+ if (RunLoopRerolling)
+ MPM.add(createLoopRerollPass());
if (SLPVectorize)
MPM.add(createSLPVectorizerPass()); // Vectorize parallel scalar chains.
Modified: llvm/trunk/lib/Transforms/Scalar/CMakeLists.txt
URL: http://llvm.org/viewvc/llvm-project/llvm/trunk/lib/Transforms/Scalar/CMakeLists.txt?rev=194939&r1=194938&r2=194939&view=diff
==============================================================================
--- llvm/trunk/lib/Transforms/Scalar/CMakeLists.txt (original)
+++ llvm/trunk/lib/Transforms/Scalar/CMakeLists.txt Sat Nov 16 17:59:05 2013
@@ -16,6 +16,7 @@ add_llvm_library(LLVMScalarOpts
LoopInstSimplify.cpp
LoopRotation.cpp
LoopStrengthReduce.cpp
+ LoopRerollPass.cpp
LoopUnrollPass.cpp
LoopUnswitch.cpp
LowerAtomic.cpp
Added: llvm/trunk/lib/Transforms/Scalar/LoopRerollPass.cpp
URL: http://llvm.org/viewvc/llvm-project/llvm/trunk/lib/Transforms/Scalar/LoopRerollPass.cpp?rev=194939&view=auto
==============================================================================
--- llvm/trunk/lib/Transforms/Scalar/LoopRerollPass.cpp (added)
+++ llvm/trunk/lib/Transforms/Scalar/LoopRerollPass.cpp Sat Nov 16 17:59:05 2013
@@ -0,0 +1,1184 @@
+//===-- LoopReroll.cpp - Loop rerolling pass ------------------------------===//
+//
+// The LLVM Compiler Infrastructure
+//
+// This file is distributed under the University of Illinois Open Source
+// License. See LICENSE.TXT for details.
+//
+//===----------------------------------------------------------------------===//
+//
+// This pass implements a simple loop reroller.
+//
+//===----------------------------------------------------------------------===//
+
+#define DEBUG_TYPE "loop-reroll"
+#include "llvm/Transforms/Scalar.h"
+#include "llvm/ADT/SmallSet.h"
+#include "llvm/ADT/Statistic.h"
+#include "llvm/ADT/STLExtras.h"
+#include "llvm/Analysis/AliasAnalysis.h"
+#include "llvm/Analysis/AliasSetTracker.h"
+#include "llvm/Analysis/LoopPass.h"
+#include "llvm/Analysis/ScalarEvolution.h"
+#include "llvm/Analysis/ScalarEvolutionExpander.h"
+#include "llvm/Analysis/ScalarEvolutionExpressions.h"
+#include "llvm/Analysis/ValueTracking.h"
+#include "llvm/IR/DataLayout.h"
+#include "llvm/IR/IntrinsicInst.h"
+#include "llvm/Support/CommandLine.h"
+#include "llvm/Support/Debug.h"
+#include "llvm/Support/raw_ostream.h"
+#include "llvm/Target/TargetLibraryInfo.h"
+#include "llvm/Transforms/Utils/BasicBlockUtils.h"
+#include "llvm/Transforms/Utils/Local.h"
+#include "llvm/Transforms/Utils/LoopUtils.h"
+
+using namespace llvm;
+
+STATISTIC(NumRerolledLoops, "Number of rerolled loops");
+
+static cl::opt<unsigned>
+MaxInc("max-reroll-increment", cl::init(2048), cl::Hidden,
+ cl::desc("The maximum increment for loop rerolling"));
+
+// This loop re-rolling transformation aims to transform loops like this:
+//
+// int foo(int a);
+// void bar(int *x) {
+// for (int i = 0; i < 500; i += 3) {
+// foo(i);
+// foo(i+1);
+// foo(i+2);
+// }
+// }
+//
+// into a loop like this:
+//
+// void bar(int *x) {
+// for (int i = 0; i < 500; ++i)
+// foo(i);
+// }
+//
+// It does this by looking for loops that, besides the latch code, are composed
+// of isomorphic DAGs of instructions, with each DAG rooted at some increment
+// to the induction variable, and where each DAG is isomorphic to the DAG
+// rooted at the induction variable (excepting the sub-DAGs which root the
+// other induction-variable increments). In other words, we're looking for loop
+// bodies of the form:
+//
+// %iv = phi [ (preheader, ...), (body, %iv.next) ]
+// f(%iv)
+// %iv.1 = add %iv, 1 <-- a root increment
+// f(%iv.1)
+// %iv.2 = add %iv, 2 <-- a root increment
+// f(%iv.2)
+// %iv.scale_m_1 = add %iv, scale-1 <-- a root increment
+// f(%iv.scale_m_1)
+// ...
+// %iv.next = add %iv, scale
+// %cmp = icmp(%iv, ...)
+// br %cmp, header, exit
+//
+// where each f(i) is a set of instructions that, collectively, are a function
+// only of i (and other loop-invariant values).
+//
+// As a special case, we can also reroll loops like this:
+//
+// int foo(int);
+// void bar(int *x) {
+// for (int i = 0; i < 500; ++i) {
+// x[3*i] = foo(0);
+// x[3*i+1] = foo(0);
+// x[3*i+2] = foo(0);
+// }
+// }
+//
+// into this:
+//
+// void bar(int *x) {
+// for (int i = 0; i < 1500; ++i)
+// x[i] = foo(0);
+// }
+//
+// in which case, we're looking for inputs like this:
+//
+// %iv = phi [ (preheader, ...), (body, %iv.next) ]
+// %scaled.iv = mul %iv, scale
+// f(%scaled.iv)
+// %scaled.iv.1 = add %scaled.iv, 1
+// f(%scaled.iv.1)
+// %scaled.iv.2 = add %scaled.iv, 2
+// f(%scaled.iv.2)
+// %scaled.iv.scale_m_1 = add %scaled.iv, scale-1
+// f(%scaled.iv.scale_m_1)
+// ...
+// %iv.next = add %iv, 1
+// %cmp = icmp(%iv, ...)
+// br %cmp, header, exit
+
+namespace {
+ class LoopReroll : public LoopPass {
+ public:
+ static char ID; // Pass ID, replacement for typeid
+ LoopReroll() : LoopPass(ID) {
+ initializeLoopRerollPass(*PassRegistry::getPassRegistry());
+ }
+
+ bool runOnLoop(Loop *L, LPPassManager &LPM);
+
+ virtual void getAnalysisUsage(AnalysisUsage &AU) const {
+ AU.addRequired<AliasAnalysis>();
+ AU.addRequired<LoopInfo>();
+ AU.addPreserved<LoopInfo>();
+ AU.addRequired<DominatorTree>();
+ AU.addPreserved<DominatorTree>();
+ AU.addRequired<ScalarEvolution>();
+ AU.addRequired<TargetLibraryInfo>();
+ }
+
+protected:
+ AliasAnalysis *AA;
+ LoopInfo *LI;
+ ScalarEvolution *SE;
+ DataLayout *DL;
+ TargetLibraryInfo *TLI;
+ DominatorTree *DT;
+
+ typedef SmallVector<Instruction *, 16> SmallInstructionVector;
+ typedef SmallSet<Instruction *, 16> SmallInstructionSet;
+
+ // A chain of isomorphic instructions, indentified by a single-use PHI,
+ // representing a reduction. Only the last value may be used outside the
+ // loop.
+ struct SimpleLoopReduction {
+ SimpleLoopReduction(Instruction *P, Loop *L)
+ : Valid(false), Instructions(1, P) {
+ assert(isa<PHINode>(P) && "First reduction instruction must be a PHI");
+ add(L);
+ }
+
+ bool valid() const {
+ return Valid;
+ }
+
+ Instruction *getPHI() const {
+ assert(Valid && "Using invalid reduction");
+ return Instructions.front();
+ }
+
+ Instruction *getReducedValue() const {
+ assert(Valid && "Using invalid reduction");
+ return Instructions.back();
+ }
+
+ Instruction *get(size_t i) const {
+ assert(Valid && "Using invalid reduction");
+ return Instructions[i+1];
+ }
+
+ Instruction *operator [] (size_t i) const { return get(i); }
+
+ // The size, ignoring the initial PHI.
+ size_t size() const {
+ assert(Valid && "Using invalid reduction");
+ return Instructions.size()-1;
+ }
+
+ typedef SmallInstructionVector::iterator iterator;
+ typedef SmallInstructionVector::const_iterator const_iterator;
+
+ iterator begin() {
+ assert(Valid && "Using invalid reduction");
+ return llvm::next(Instructions.begin());
+ }
+
+ const_iterator begin() const {
+ assert(Valid && "Using invalid reduction");
+ return llvm::next(Instructions.begin());
+ }
+
+ iterator end() { return Instructions.end(); }
+ const_iterator end() const { return Instructions.end(); }
+
+ protected:
+ bool Valid;
+ SmallInstructionVector Instructions;
+
+ void add(Loop *L);
+ };
+
+ // The set of all reductions, and state tracking of possible reductions
+ // during loop instruction processing.
+ struct ReductionTracker {
+ typedef SmallVector<SimpleLoopReduction, 16> SmallReductionVector;
+
+ // Add a new possible reduction.
+ void addSLR(SimpleLoopReduction &SLR) {
+ PossibleReds.push_back(SLR);
+ }
+
+ // Setup to track possible reductions corresponding to the provided
+ // rerolling scale. Only reductions with a number of non-PHI instructions
+ // that is divisible by the scale are considered. Three instructions sets
+ // are filled in:
+ // - A set of all possible instructions in eligible reductions.
+ // - A set of all PHIs in eligible reductions
+ // - A set of all reduced values (last instructions) in eligible reductions.
+ void restrictToScale(uint64_t Scale,
+ SmallInstructionSet &PossibleRedSet,
+ SmallInstructionSet &PossibleRedPHISet,
+ SmallInstructionSet &PossibleRedLastSet) {
+ PossibleRedIdx.clear();
+ PossibleRedIter.clear();
+ Reds.clear();
+
+ for (unsigned i = 0, e = PossibleReds.size(); i != e; ++i)
+ if (PossibleReds[i].size() % Scale == 0) {
+ PossibleRedLastSet.insert(PossibleReds[i].getReducedValue());
+ PossibleRedPHISet.insert(PossibleReds[i].getPHI());
+
+ PossibleRedSet.insert(PossibleReds[i].getPHI());
+ PossibleRedIdx[PossibleReds[i].getPHI()] = i;
+ for (SimpleLoopReduction::iterator J = PossibleReds[i].begin(),
+ JE = PossibleReds[i].end(); J != JE; ++J) {
+ PossibleRedSet.insert(*J);
+ PossibleRedIdx[*J] = i;
+ }
+ }
+ }
+
+ // The functions below are used while processing the loop instructions.
+
+ // Are the two instructions both from reductions, and furthermore, from
+ // the same reduction?
+ bool isPairInSame(Instruction *J1, Instruction *J2) {
+ DenseMap<Instruction *, int>::iterator J1I = PossibleRedIdx.find(J1);
+ if (J1I != PossibleRedIdx.end()) {
+ DenseMap<Instruction *, int>::iterator J2I = PossibleRedIdx.find(J2);
+ if (J2I != PossibleRedIdx.end() && J1I->second == J2I->second)
+ return true;
+ }
+
+ return false;
+ }
+
+ // The two provided instructions, the first from the base iteration, and
+ // the second from iteration i, form a matched pair. If these are part of
+ // a reduction, record that fact.
+ void recordPair(Instruction *J1, Instruction *J2, unsigned i) {
+ if (PossibleRedIdx.count(J1)) {
+ assert(PossibleRedIdx.count(J2) &&
+ "Recording reduction vs. non-reduction instruction?");
+
+ PossibleRedIter[J1] = 0;
+ PossibleRedIter[J2] = i;
+
+ int Idx = PossibleRedIdx[J1];
+ assert(Idx == PossibleRedIdx[J2] &&
+ "Recording pair from different reductions?");
+ Reds.insert(PossibleRedIdx[J1]);
+ }
+ }
+
+ // The functions below can be called after we've finished processing all
+ // instructions in the loop, and we know which reductions were selected.
+
+ // Is the provided instruction the PHI of a reduction selected for
+ // rerolling?
+ bool isSelectedPHI(Instruction *J) {
+ if (!isa<PHINode>(J))
+ return false;
+
+ for (DenseSet<int>::iterator RI = Reds.begin(), RIE = Reds.end();
+ RI != RIE; ++RI) {
+ int i = *RI;
+ if (cast<Instruction>(J) == PossibleReds[i].getPHI())
+ return true;
+ }
+
+ return false;
+ }
+
+ bool validateSelected();
+ void replaceSelected();
+
+ protected:
+ // The vector of all possible reductions (for any scale).
+ SmallReductionVector PossibleReds;
+
+ DenseMap<Instruction *, int> PossibleRedIdx;
+ DenseMap<Instruction *, int> PossibleRedIter;
+ DenseSet<int> Reds;
+ };
+
+ void collectPossibleIVs(Loop *L, SmallInstructionVector &PossibleIVs);
+ void collectPossibleReductions(Loop *L,
+ ReductionTracker &Reductions);
+ void collectInLoopUserSet(Loop *L,
+ const SmallInstructionVector &Roots,
+ const SmallInstructionSet &Exclude,
+ const SmallInstructionSet &Final,
+ DenseSet<Instruction *> &Users);
+ void collectInLoopUserSet(Loop *L,
+ Instruction * Root,
+ const SmallInstructionSet &Exclude,
+ const SmallInstructionSet &Final,
+ DenseSet<Instruction *> &Users);
+ bool findScaleFromMul(Instruction *RealIV, uint64_t &Scale,
+ Instruction *&IV,
+ SmallInstructionVector &LoopIncs);
+ bool collectAllRoots(Loop *L, uint64_t Inc, uint64_t Scale, Instruction *IV,
+ SmallVector<SmallInstructionVector, 32> &Roots,
+ SmallInstructionSet &AllRoots,
+ SmallInstructionVector &LoopIncs);
+ bool reroll(Instruction *IV, Loop *L, BasicBlock *Header, const SCEV *IterCount,
+ ReductionTracker &Reductions);
+ };
+}
+
+char LoopReroll::ID = 0;
+INITIALIZE_PASS_BEGIN(LoopReroll, "loop-reroll", "Reroll loops", false, false)
+INITIALIZE_AG_DEPENDENCY(AliasAnalysis)
+INITIALIZE_PASS_DEPENDENCY(LoopInfo)
+INITIALIZE_PASS_DEPENDENCY(DominatorTree)
+INITIALIZE_PASS_DEPENDENCY(ScalarEvolution)
+INITIALIZE_PASS_DEPENDENCY(TargetLibraryInfo)
+INITIALIZE_PASS_END(LoopReroll, "loop-reroll", "Reroll loops", false, false)
+
+Pass *llvm::createLoopRerollPass() {
+ return new LoopReroll;
+}
+
+// Returns true if the provided instruction is used outside the given loop.
+// This operates like Instruction::isUsedOutsideOfBlock, but considers PHIs in
+// non-loop blocks to be outside the loop.
+static bool hasUsesOutsideLoop(Instruction *I, Loop *L) {
+ for (Value::use_iterator UI = I->use_begin(),
+ UIE = I->use_end(); UI != UIE; ++UI) {
+ Instruction *User = cast<Instruction>(*UI);
+ if (!L->contains(User))
+ return true;
+ }
+
+ return false;
+}
+
+// Collect the list of loop induction variables with respect to which it might
+// be possible to reroll the loop.
+void LoopReroll::collectPossibleIVs(Loop *L,
+ SmallInstructionVector &PossibleIVs) {
+ BasicBlock *Header = L->getHeader();
+ for (BasicBlock::iterator I = Header->begin(),
+ IE = Header->getFirstInsertionPt(); I != IE; ++I) {
+ if (!isa<PHINode>(I))
+ continue;
+ if (!I->getType()->isIntegerTy())
+ continue;
+
+ if (const SCEVAddRecExpr *PHISCEV =
+ dyn_cast<SCEVAddRecExpr>(SE->getSCEV(I))) {
+ if (PHISCEV->getLoop() != L)
+ continue;
+ if (!PHISCEV->isAffine())
+ continue;
+ if (const SCEVConstant *IncSCEV =
+ dyn_cast<SCEVConstant>(PHISCEV->getStepRecurrence(*SE))) {
+ if (!IncSCEV->getValue()->getValue().isStrictlyPositive())
+ continue;
+ if (IncSCEV->getValue()->uge(MaxInc))
+ continue;
+
+ DEBUG(dbgs() << "LRR: Possible IV: " << *I << " = " <<
+ *PHISCEV << "\n");
+ PossibleIVs.push_back(I);
+ }
+ }
+ }
+}
+
+// Add the remainder of the reduction-variable chain to the instruction vector
+// (the initial PHINode has already been added). If successful, the object is
+// marked as valid.
+void LoopReroll::SimpleLoopReduction::add(Loop *L) {
+ assert(!Valid && "Cannot add to an already-valid chain");
+
+ // The reduction variable must be a chain of single-use instructions
+ // (including the PHI), except for the last value (which is used by the PHI
+ // and also outside the loop).
+ Instruction *C = Instructions.front();
+
+ do {
+ C = cast<Instruction>(*C->use_begin());
+ if (C->hasOneUse()) {
+ if (!C->isBinaryOp())
+ return;
+
+ if (!(isa<PHINode>(Instructions.back()) ||
+ C->isSameOperationAs(Instructions.back())))
+ return;
+
+ Instructions.push_back(C);
+ }
+ } while (C->hasOneUse());
+
+ if (Instructions.size() < 2 ||
+ !C->isSameOperationAs(Instructions.back()) ||
+ C->use_begin() == C->use_end())
+ return;
+
+ // C is now the (potential) last instruction in the reduction chain.
+ for (Value::use_iterator UI = C->use_begin(), UIE = C->use_end();
+ UI != UIE; ++UI) {
+ // The only in-loop user can be the initial PHI.
+ if (L->contains(cast<Instruction>(*UI)))
+ if (cast<Instruction>(*UI ) != Instructions.front())
+ return;
+ }
+
+ Instructions.push_back(C);
+ Valid = true;
+}
+
+// Collect the vector of possible reduction variables.
+void LoopReroll::collectPossibleReductions(Loop *L,
+ ReductionTracker &Reductions) {
+ BasicBlock *Header = L->getHeader();
+ for (BasicBlock::iterator I = Header->begin(),
+ IE = Header->getFirstInsertionPt(); I != IE; ++I) {
+ if (!isa<PHINode>(I))
+ continue;
+ if (!I->getType()->isSingleValueType())
+ continue;
+
+ SimpleLoopReduction SLR(I, L);
+ if (!SLR.valid())
+ continue;
+
+ DEBUG(dbgs() << "LRR: Possible reduction: " << *I << " (with " <<
+ SLR.size() << " chained instructions)\n");
+ Reductions.addSLR(SLR);
+ }
+}
+
+// Collect the set of all users of the provided root instruction. This set of
+// users contains not only the direct users of the root instruction, but also
+// all users of those users, and so on. There are two exceptions:
+//
+// 1. Instructions in the set of excluded instructions are never added to the
+// use set (even if they are users). This is used, for example, to exclude
+// including root increments in the use set of the primary IV.
+//
+// 2. Instructions in the set of final instructions are added to the use set
+// if they are users, but their users are not added. This is used, for
+// example, to prevent a reduction update from forcing all later reduction
+// updates into the use set.
+void LoopReroll::collectInLoopUserSet(Loop *L,
+ Instruction *Root, const SmallInstructionSet &Exclude,
+ const SmallInstructionSet &Final,
+ DenseSet<Instruction *> &Users) {
+ SmallInstructionVector Queue(1, Root);
+ while (!Queue.empty()) {
+ Instruction *I = Queue.pop_back_val();
+ if (!Users.insert(I).second)
+ continue;
+
+ if (!Final.count(I))
+ for (Value::use_iterator UI = I->use_begin(),
+ UIE = I->use_end(); UI != UIE; ++UI) {
+ Instruction *User = cast<Instruction>(*UI);
+ if (PHINode *PN = dyn_cast<PHINode>(User)) {
+ // Ignore "wrap-around" uses to PHIs of this loop's header.
+ if (PN->getIncomingBlock(UI) == L->getHeader())
+ continue;
+ }
+
+ if (L->contains(User) && !Exclude.count(User)) {
+ Queue.push_back(User);
+ }
+ }
+
+ // We also want to collect single-user "feeder" values.
+ for (User::op_iterator OI = I->op_begin(),
+ OIE = I->op_end(); OI != OIE; ++OI) {
+ if (Instruction *Op = dyn_cast<Instruction>(*OI))
+ if (Op->hasOneUse() && L->contains(Op) && !Exclude.count(Op) &&
+ !Final.count(Op))
+ Queue.push_back(Op);
+ }
+ }
+}
+
+// Collect all of the users of all of the provided root instructions (combined
+// into a single set).
+void LoopReroll::collectInLoopUserSet(Loop *L,
+ const SmallInstructionVector &Roots,
+ const SmallInstructionSet &Exclude,
+ const SmallInstructionSet &Final,
+ DenseSet<Instruction *> &Users) {
+ for (SmallInstructionVector::const_iterator I = Roots.begin(),
+ IE = Roots.end(); I != IE; ++I)
+ collectInLoopUserSet(L, *I, Exclude, Final, Users);
+}
+
+static bool isSimpleLoadStore(Instruction *I) {
+ if (LoadInst *LI = dyn_cast<LoadInst>(I))
+ return LI->isSimple();
+ if (StoreInst *SI = dyn_cast<StoreInst>(I))
+ return SI->isSimple();
+ if (MemIntrinsic *MI = dyn_cast<MemIntrinsic>(I))
+ return !MI->isVolatile();
+ return false;
+}
+
+// Recognize loops that are setup like this:
+//
+// %iv = phi [ (preheader, ...), (body, %iv.next) ]
+// %scaled.iv = mul %iv, scale
+// f(%scaled.iv)
+// %scaled.iv.1 = add %scaled.iv, 1
+// f(%scaled.iv.1)
+// %scaled.iv.2 = add %scaled.iv, 2
+// f(%scaled.iv.2)
+// %scaled.iv.scale_m_1 = add %scaled.iv, scale-1
+// f(%scaled.iv.scale_m_1)
+// ...
+// %iv.next = add %iv, 1
+// %cmp = icmp(%iv, ...)
+// br %cmp, header, exit
+//
+// and, if found, set IV = %scaled.iv, and add %iv.next to LoopIncs.
+bool LoopReroll::findScaleFromMul(Instruction *RealIV, uint64_t &Scale,
+ Instruction *&IV,
+ SmallInstructionVector &LoopIncs) {
+ // This is a special case: here we're looking for all uses (except for
+ // the increment) to be multiplied by a common factor. The increment must
+ // be by one. This is to capture loops like:
+ // for (int i = 0; i < 500; ++i) {
+ // foo(3*i); foo(3*i+1); foo(3*i+2);
+ // }
+ if (RealIV->getNumUses() != 2)
+ return false;
+ const SCEVAddRecExpr *RealIVSCEV = cast<SCEVAddRecExpr>(SE->getSCEV(RealIV));
+ Instruction *User1 = cast<Instruction>(*RealIV->use_begin()),
+ *User2 = cast<Instruction>(*llvm::next(RealIV->use_begin()));
+ if (!SE->isSCEVable(User1->getType()) || !SE->isSCEVable(User2->getType()))
+ return false;
+ const SCEVAddRecExpr *User1SCEV =
+ dyn_cast<SCEVAddRecExpr>(SE->getSCEV(User1)),
+ *User2SCEV =
+ dyn_cast<SCEVAddRecExpr>(SE->getSCEV(User2));
+ if (!User1SCEV || !User1SCEV->isAffine() ||
+ !User2SCEV || !User2SCEV->isAffine())
+ return false;
+
+ // We assume below that User1 is the scale multiply and User2 is the
+ // increment. If this can't be true, then swap them.
+ if (User1SCEV == RealIVSCEV->getPostIncExpr(*SE)) {
+ std::swap(User1, User2);
+ std::swap(User1SCEV, User2SCEV);
+ }
+
+ if (User2SCEV != RealIVSCEV->getPostIncExpr(*SE))
+ return false;
+ assert(User2SCEV->getStepRecurrence(*SE)->isOne() &&
+ "Invalid non-unit step for multiplicative scaling");
+ LoopIncs.push_back(User2);
+
+ if (const SCEVConstant *MulScale =
+ dyn_cast<SCEVConstant>(User1SCEV->getStepRecurrence(*SE))) {
+ // Make sure that both the start and step have the same multiplier.
+ if (RealIVSCEV->getStart()->getType() != MulScale->getType())
+ return false;
+ if (SE->getMulExpr(RealIVSCEV->getStart(), MulScale) !=
+ User1SCEV->getStart())
+ return false;
+
+ ConstantInt *MulScaleCI = MulScale->getValue();
+ if (!MulScaleCI->uge(2) || MulScaleCI->uge(MaxInc))
+ return false;
+ Scale = MulScaleCI->getZExtValue();
+ IV = User1;
+ } else
+ return false;
+
+ DEBUG(dbgs() << "LRR: Found possible scaling " << *User1 << "\n");
+ return true;
+}
+
+// Collect all root increments with respect to the provided induction variable
+// (normally the PHI, but sometimes a multiply). A root increment is an
+// instruction, normally an add, with a positive constant less than Scale. In a
+// rerollable loop, each of these increments is the root of an instruction
+// graph isomorphic to the others. Also, we collect the final induction
+// increment (the increment equal to the Scale), and its users in LoopIncs.
+bool LoopReroll::collectAllRoots(Loop *L, uint64_t Inc, uint64_t Scale,
+ Instruction *IV,
+ SmallVector<SmallInstructionVector, 32> &Roots,
+ SmallInstructionSet &AllRoots,
+ SmallInstructionVector &LoopIncs) {
+ for (Value::use_iterator UI = IV->use_begin(),
+ UIE = IV->use_end(); UI != UIE; ++UI) {
+ Instruction *User = cast<Instruction>(*UI);
+ if (!SE->isSCEVable(User->getType()))
+ continue;
+ if (User->getType() != IV->getType())
+ continue;
+ if (!L->contains(User))
+ continue;
+ if (hasUsesOutsideLoop(User, L))
+ continue;
+
+ if (const SCEVConstant *Diff = dyn_cast<SCEVConstant>(SE->getMinusSCEV(
+ SE->getSCEV(User), SE->getSCEV(IV)))) {
+ uint64_t Idx = Diff->getValue()->getValue().getZExtValue();
+ if (Idx > 0 && Idx < Scale) {
+ Roots[Idx-1].push_back(User);
+ AllRoots.insert(User);
+ } else if (Idx == Scale && Inc > 1) {
+ LoopIncs.push_back(User);
+ }
+ }
+ }
+
+ if (Roots[0].empty())
+ return false;
+ bool AllSame = true;
+ for (unsigned i = 1; i < Scale-1; ++i)
+ if (Roots[i].size() != Roots[0].size()) {
+ AllSame = false;
+ break;
+ }
+
+ if (!AllSame)
+ return false;
+
+ return true;
+}
+
+// Validate the selected reductions. All iterations must have an isomorphic
+// part of the reduction chain and, for non-associative reductions, the chain
+// entries must appear in order.
+bool LoopReroll::ReductionTracker::validateSelected() {
+ // For a non-associative reduction, the chain entries must appear in order.
+ for (DenseSet<int>::iterator RI = Reds.begin(), RIE = Reds.end();
+ RI != RIE; ++RI) {
+ int i = *RI;
+ int PrevIter = 0, BaseCount = 0, Count = 0;
+ for (SimpleLoopReduction::iterator J = PossibleReds[i].begin(),
+ JE = PossibleReds[i].end(); J != JE; ++J) {
+ // Note that all instructions in the chain must have been found because
+ // all instructions in the function must have been assigned to some
+ // iteration.
+ int Iter = PossibleRedIter[*J];
+ if (Iter != PrevIter && Iter != PrevIter + 1 &&
+ !PossibleReds[i].getReducedValue()->isAssociative()) {
+ DEBUG(dbgs() << "LRR: Out-of-order non-associative reduction: " <<
+ *J << "\n");
+ return false;
+ }
+
+ if (Iter != PrevIter) {
+ if (Count != BaseCount) {
+ DEBUG(dbgs() << "LRR: Iteration " << PrevIter <<
+ " reduction use count " << Count <<
+ " is not equal to the base use count " <<
+ BaseCount << "\n");
+ return false;
+ }
+
+ Count = 0;
+ }
+
+ ++Count;
+ if (Iter == 0)
+ ++BaseCount;
+
+ PrevIter = Iter;
+ }
+ }
+
+ return true;
+}
+
+// For all selected reductions, remove all parts except those in the first
+// iteration (and the PHI). Replace outside uses of the reduced value with uses
+// of the first-iteration reduced value (in other words, reroll the selected
+// reductions).
+void LoopReroll::ReductionTracker::replaceSelected() {
+ // Fixup reductions to refer to the last instruction associated with the
+ // first iteration (not the last).
+ for (DenseSet<int>::iterator RI = Reds.begin(), RIE = Reds.end();
+ RI != RIE; ++RI) {
+ int i = *RI;
+ int j = 0;
+ for (int e = PossibleReds[i].size(); j != e; ++j)
+ if (PossibleRedIter[PossibleReds[i][j]] != 0) {
+ --j;
+ break;
+ }
+
+ // Replace users with the new end-of-chain value.
+ SmallInstructionVector Users;
+ for (Value::use_iterator UI =
+ PossibleReds[i].getReducedValue()->use_begin(),
+ UIE = PossibleReds[i].getReducedValue()->use_end(); UI != UIE; ++UI)
+ Users.push_back(cast<Instruction>(*UI));
+
+ for (SmallInstructionVector::iterator J = Users.begin(),
+ JE = Users.end(); J != JE; ++J)
+ (*J)->replaceUsesOfWith(PossibleReds[i].getReducedValue(),
+ PossibleReds[i][j]);
+ }
+}
+
+// Reroll the provided loop with respect to the provided induction variable.
+// Generally, we're looking for a loop like this:
+//
+// %iv = phi [ (preheader, ...), (body, %iv.next) ]
+// f(%iv)
+// %iv.1 = add %iv, 1 <-- a root increment
+// f(%iv.1)
+// %iv.2 = add %iv, 2 <-- a root increment
+// f(%iv.2)
+// %iv.scale_m_1 = add %iv, scale-1 <-- a root increment
+// f(%iv.scale_m_1)
+// ...
+// %iv.next = add %iv, scale
+// %cmp = icmp(%iv, ...)
+// br %cmp, header, exit
+//
+// Notably, we do not require that f(%iv), f(%iv.1), etc. be isolated groups of
+// instructions. In other words, the instructions in f(%iv), f(%iv.1), etc. can
+// be intermixed with eachother. The restriction imposed by this algorithm is
+// that the relative order of the isomorphic instructions in f(%iv), f(%iv.1),
+// etc. be the same.
+//
+// First, we collect the use set of %iv, excluding the other increment roots.
+// This gives us f(%iv). Then we iterate over the loop instructions (scale-1)
+// times, having collected the use set of f(%iv.(i+1)), during which we:
+// - Ensure that the next unmatched instruction in f(%iv) is isomorphic to
+// the next unmatched instruction in f(%iv.(i+1)).
+// - Ensure that both matched instructions don't have any external users
+// (with the exception of last-in-chain reduction instructions).
+// - Track the (aliasing) write set, and other side effects, of all
+// instructions that belong to future iterations that come before the matched
+// instructions. If the matched instructions read from that write set, then
+// f(%iv) or f(%iv.(i+1)) has some dependency on instructions in
+// f(%iv.(j+1)) for some j > i, and we cannot reroll the loop. Similarly,
+// if any of these future instructions had side effects (could not be
+// speculatively executed), and so do the matched instructions, when we
+// cannot reorder those side-effect-producing instructions, and rerolling
+// fails.
+//
+// Finally, we make sure that all loop instructions are either loop increment
+// roots, belong to simple latch code, parts of validated reductions, part of
+// f(%iv) or part of some f(%iv.i). If all of that is true (and all reductions
+// have been validated), then we reroll the loop.
+bool LoopReroll::reroll(Instruction *IV, Loop *L, BasicBlock *Header,
+ const SCEV *IterCount,
+ ReductionTracker &Reductions) {
+ const SCEVAddRecExpr *RealIVSCEV = cast<SCEVAddRecExpr>(SE->getSCEV(IV));
+ uint64_t Inc = cast<SCEVConstant>(RealIVSCEV->getOperand(1))->
+ getValue()->getZExtValue();
+ // The collection of loop increment instructions.
+ SmallInstructionVector LoopIncs;
+ uint64_t Scale = Inc;
+
+ // The effective induction variable, IV, is normally also the real induction
+ // variable. When we're dealing with a loop like:
+ // for (int i = 0; i < 500; ++i)
+ // x[3*i] = ...;
+ // x[3*i+1] = ...;
+ // x[3*i+2] = ...;
+ // then the real IV is still i, but the effective IV is (3*i).
+ Instruction *RealIV = IV;
+ if (Inc == 1 && !findScaleFromMul(RealIV, Scale, IV, LoopIncs))
+ return false;
+
+ assert(Scale <= MaxInc && "Scale is too large");
+ assert(Scale > 1 && "Scale must be at least 2");
+
+ // The set of increment instructions for each increment value.
+ SmallVector<SmallInstructionVector, 32> Roots(Scale-1);
+ SmallInstructionSet AllRoots;
+ if (!collectAllRoots(L, Inc, Scale, IV, Roots, AllRoots, LoopIncs))
+ return false;
+
+ DEBUG(dbgs() << "LRR: Found all root induction increments for: " <<
+ *RealIV << "\n");
+
+ // An array of just the possible reductions for this scale factor. When we
+ // collect the set of all users of some root instructions, these reduction
+ // instructions are treated as 'final' (their uses are not considered).
+ // This is important because we don't want the root use set to search down
+ // the reduction chain.
+ SmallInstructionSet PossibleRedSet;
+ SmallInstructionSet PossibleRedLastSet, PossibleRedPHISet;
+ Reductions.restrictToScale(Scale, PossibleRedSet, PossibleRedPHISet,
+ PossibleRedLastSet);
+
+ // We now need to check for equivalence of the use graph of each root with
+ // that of the primary induction variable (excluding the roots). Our goal
+ // here is not to solve the full graph isomorphism problem, but rather to
+ // catch common cases without a lot of work. As a result, we will assume
+ // that the relative order of the instructions in each unrolled iteration
+ // is the same (although we will not make an assumption about how the
+ // different iterations are intermixed). Note that while the order must be
+ // the same, the instructions may not be in the same basic block.
+ SmallInstructionSet Exclude(AllRoots);
+ Exclude.insert(LoopIncs.begin(), LoopIncs.end());
+
+ DenseSet<Instruction *> BaseUseSet;
+ collectInLoopUserSet(L, IV, Exclude, PossibleRedSet, BaseUseSet);
+
+ DenseSet<Instruction *> AllRootUses;
+ std::vector<DenseSet<Instruction *> > RootUseSets(Scale-1);
+
+ bool MatchFailed = false;
+ for (unsigned i = 0; i < Scale-1 && !MatchFailed; ++i) {
+ DenseSet<Instruction *> &RootUseSet = RootUseSets[i];
+ collectInLoopUserSet(L, Roots[i], SmallInstructionSet(),
+ PossibleRedSet, RootUseSet);
+
+ DEBUG(dbgs() << "LRR: base use set size: " << BaseUseSet.size() <<
+ " vs. iteration increment " << (i+1) <<
+ " use set size: " << RootUseSet.size() << "\n");
+
+ if (BaseUseSet.size() != RootUseSet.size()) {
+ MatchFailed = true;
+ break;
+ }
+
+ // In addition to regular aliasing information, we need to look for
+ // instructions from later (future) iterations that have side effects
+ // preventing us from reordering them past other instructions with side
+ // effects.
+ bool FutureSideEffects = false;
+ AliasSetTracker AST(*AA);
+
+ // The map between instructions in f(%iv.(i+1)) and f(%iv).
+ DenseMap<Value *, Value *> BaseMap;
+
+ assert(L->getNumBlocks() == 1 && "Cannot handle multi-block loops");
+ for (BasicBlock::iterator J1 = Header->begin(), J2 = Header->begin(),
+ JE = Header->end(); J1 != JE && !MatchFailed; ++J1) {
+ if (cast<Instruction>(J1) == RealIV)
+ continue;
+ if (cast<Instruction>(J1) == IV)
+ continue;
+ if (!BaseUseSet.count(J1))
+ continue;
+ if (PossibleRedPHISet.count(J1)) // Skip reduction PHIs.
+ continue;
+
+ while (J2 != JE && (!RootUseSet.count(J2) ||
+ std::find(Roots[i].begin(), Roots[i].end(), J2) !=
+ Roots[i].end())) {
+ // As we iterate through the instructions, instructions that don't
+ // belong to previous iterations (or the base case), must belong to
+ // future iterations. We want to track the alias set of writes from
+ // previous iterations.
+ if (!isa<PHINode>(J2) && !BaseUseSet.count(J2) &&
+ !AllRootUses.count(J2)) {
+ if (J2->mayWriteToMemory())
+ AST.add(J2);
+
+ // Note: This is specifically guarded by a check on isa<PHINode>,
+ // which while a valid (somewhat arbitrary) micro-optimization, is
+ // needed because otherwise isSafeToSpeculativelyExecute returns
+ // false on PHI nodes.
+ if (!isSimpleLoadStore(J2) && !isSafeToSpeculativelyExecute(J2, DL))
+ FutureSideEffects = true;
+ }
+
+ ++J2;
+ }
+
+ if (!J1->isSameOperationAs(J2)) {
+ DEBUG(dbgs() << "LRR: iteration root match failed at " << *J1 <<
+ " vs. " << *J2 << "\n");
+ MatchFailed = true;
+ break;
+ }
+
+ // Make sure that this instruction, which is in the use set of this
+ // root instruction, does not also belong to the base set or the set of
+ // some previous root instruction.
+ if (BaseUseSet.count(J2) || AllRootUses.count(J2)) {
+ DEBUG(dbgs() << "LRR: iteration root match failed at " << *J1 <<
+ " vs. " << *J2 << " (prev. case overlap)\n");
+ MatchFailed = true;
+ break;
+ }
+
+ // Make sure that we don't alias with any instruction in the alias set
+ // tracker. If we do, then we depend on a future iteration, and we
+ // can't reroll.
+ if (J2->mayReadFromMemory()) {
+ for (AliasSetTracker::iterator K = AST.begin(), KE = AST.end();
+ K != KE && !MatchFailed; ++K) {
+ if (K->aliasesUnknownInst(J2, *AA)) {
+ DEBUG(dbgs() << "LRR: iteration root match failed at " << *J1 <<
+ " vs. " << *J2 << " (depends on future store)\n");
+ MatchFailed = true;
+ break;
+ }
+ }
+ }
+
+ // If we've past an instruction from a future iteration that may have
+ // side effects, and this instruction might also, then we can't reorder
+ // them, and this matching fails. As an exception, we allow the alias
+ // set tracker to handle regular (simple) load/store dependencies.
+ if (FutureSideEffects &&
+ ((!isSimpleLoadStore(J1) && !isSafeToSpeculativelyExecute(J1)) ||
+ (!isSimpleLoadStore(J2) && !isSafeToSpeculativelyExecute(J2)))) {
+ DEBUG(dbgs() << "LRR: iteration root match failed at " << *J1 <<
+ " vs. " << *J2 <<
+ " (side effects prevent reordering)\n");
+ MatchFailed = true;
+ break;
+ }
+
+ // For instructions that are part of a reduction, if the operation is
+ // associative, then don't bother matching the operands (because we
+ // already know that the instructions are isomorphic, and the order
+ // within the iteration does not matter). For non-associative reductions,
+ // we do need to match the operands, because we need to reject
+ // out-of-order instructions within an iteration!
+ // For example (assume floating-point addition), we need to reject this:
+ // x += a[i]; x += b[i];
+ // x += a[i+1]; x += b[i+1];
+ // x += b[i+2]; x += a[i+2];
+ bool InReduction = Reductions.isPairInSame(J1, J2);
+
+ if (!(InReduction && J1->isAssociative())) {
+ bool Swapped = false, SomeOpMatched = false;;
+ for (unsigned j = 0; j < J1->getNumOperands() && !MatchFailed; ++j) {
+ Value *Op2 = J2->getOperand(j);
+
+ // If this is part of a reduction (and the operation is not
+ // associatve), then we match all operands, but not those that are
+ // part of the reduction.
+ if (InReduction)
+ if (Instruction *Op2I = dyn_cast<Instruction>(Op2))
+ if (Reductions.isPairInSame(J2, Op2I))
+ continue;
+
+ DenseMap<Value *, Value *>::iterator BMI = BaseMap.find(Op2);
+ if (BMI != BaseMap.end())
+ Op2 = BMI->second;
+ else if (std::find(Roots[i].begin(), Roots[i].end(),
+ (Instruction*) Op2) != Roots[i].end())
+ Op2 = IV;
+
+ if (J1->getOperand(Swapped ? unsigned(!j) : j) != Op2) {
+ // If we've not already decided to swap the matched operands, and
+ // we've not already matched our first operand (note that we could
+ // have skipped matching the first operand because it is part of a
+ // reduction above), and the instruction is commutative, then try
+ // the swapped match.
+ if (!Swapped && J1->isCommutative() && !SomeOpMatched &&
+ J1->getOperand(!j) == Op2) {
+ Swapped = true;
+ } else {
+ DEBUG(dbgs() << "LRR: iteration root match failed at " << *J1 <<
+ " vs. " << *J2 << " (operand " << j << ")\n");
+ MatchFailed = true;
+ break;
+ }
+ }
+
+ SomeOpMatched = true;
+ }
+ }
+
+ if ((!PossibleRedLastSet.count(J1) && hasUsesOutsideLoop(J1, L)) ||
+ (!PossibleRedLastSet.count(J2) && hasUsesOutsideLoop(J2, L))) {
+ DEBUG(dbgs() << "LRR: iteration root match failed at " << *J1 <<
+ " vs. " << *J2 << " (uses outside loop)\n");
+ MatchFailed = true;
+ break;
+ }
+
+ if (!MatchFailed)
+ BaseMap.insert(std::pair<Value *, Value *>(J2, J1));
+
+ AllRootUses.insert(J2);
+ Reductions.recordPair(J1, J2, i+1);
+
+ ++J2;
+ }
+ }
+
+ if (MatchFailed)
+ return false;
+
+ DEBUG(dbgs() << "LRR: Matched all iteration increments for " <<
+ *RealIV << "\n");
+
+ DenseSet<Instruction *> LoopIncUseSet;
+ collectInLoopUserSet(L, LoopIncs, SmallInstructionSet(),
+ SmallInstructionSet(), LoopIncUseSet);
+ DEBUG(dbgs() << "LRR: Loop increment set size: " <<
+ LoopIncUseSet.size() << "\n");
+
+ // Make sure that all instructions in the loop have been included in some
+ // use set.
+ for (BasicBlock::iterator J = Header->begin(), JE = Header->end();
+ J != JE; ++J) {
+ if (isa<DbgInfoIntrinsic>(J))
+ continue;
+ if (cast<Instruction>(J) == RealIV)
+ continue;
+ if (cast<Instruction>(J) == IV)
+ continue;
+ if (BaseUseSet.count(J) || AllRootUses.count(J) ||
+ (LoopIncUseSet.count(J) && (J->isTerminator() ||
+ isSafeToSpeculativelyExecute(J, DL))))
+ continue;
+
+ if (AllRoots.count(J))
+ continue;
+
+ if (Reductions.isSelectedPHI(J))
+ continue;
+
+ DEBUG(dbgs() << "LRR: aborting reroll based on " << *RealIV <<
+ " unprocessed instruction found: " << *J << "\n");
+ MatchFailed = true;
+ break;
+ }
+
+ if (MatchFailed)
+ return false;
+
+ DEBUG(dbgs() << "LRR: all instructions processed from " <<
+ *RealIV << "\n");
+
+ if (!Reductions.validateSelected())
+ return false;
+
+ // At this point, we've validated the rerolling, and we're committed to
+ // making changes!
+
+ Reductions.replaceSelected();
+
+ // Remove instructions associated with non-base iterations.
+ for (BasicBlock::reverse_iterator J = Header->rbegin();
+ J != Header->rend();) {
+ if (AllRootUses.count(&*J)) {
+ Instruction *D = &*J;
+ DEBUG(dbgs() << "LRR: removing: " << *D << "\n");
+ D->eraseFromParent();
+ continue;
+ }
+
+ ++J;
+ }
+
+ // Insert the new induction variable.
+ const SCEV *Start = RealIVSCEV->getStart();
+ if (Inc == 1)
+ Start = SE->getMulExpr(Start,
+ SE->getConstant(Start->getType(), Scale));
+ const SCEVAddRecExpr *H =
+ cast<SCEVAddRecExpr>(SE->getAddRecExpr(Start,
+ SE->getConstant(RealIVSCEV->getType(), 1),
+ L, SCEV::FlagAnyWrap));
+ { // Limit the lifetime of SCEVExpander.
+ SCEVExpander Expander(*SE, "reroll");
+ PHINode *NewIV =
+ cast<PHINode>(Expander.expandCodeFor(H, IV->getType(),
+ Header->begin()));
+ for (DenseSet<Instruction *>::iterator J = BaseUseSet.begin(),
+ JE = BaseUseSet.end(); J != JE; ++J)
+ (*J)->replaceUsesOfWith(IV, NewIV);
+
+ if (BranchInst *BI = dyn_cast<BranchInst>(Header->getTerminator())) {
+ if (LoopIncUseSet.count(BI)) {
+ const SCEV *ICSCEV = RealIVSCEV->evaluateAtIteration(IterCount, *SE);
+ if (Inc == 1)
+ ICSCEV =
+ SE->getMulExpr(ICSCEV, SE->getConstant(ICSCEV->getType(), Scale));
+ Value *IC;
+ if (isa<SCEVConstant>(ICSCEV)) {
+ IC = Expander.expandCodeFor(ICSCEV, NewIV->getType(), BI);
+ } else {
+ BasicBlock *Preheader = L->getLoopPreheader();
+ if (!Preheader)
+ Preheader = InsertPreheaderForLoop(L, this);
+
+ IC = Expander.expandCodeFor(ICSCEV, NewIV->getType(),
+ Preheader->getTerminator());
+ }
+
+ Value *NewIVNext = NewIV->getIncomingValueForBlock(Header);
+ Value *Cond = new ICmpInst(BI, CmpInst::ICMP_EQ, NewIVNext, IC,
+ "exitcond");
+ BI->setCondition(Cond);
+
+ if (BI->getSuccessor(1) != Header)
+ BI->swapSuccessors();
+ }
+ }
+ }
+
+ SimplifyInstructionsInBlock(Header, DL, TLI);
+ DeleteDeadPHIs(Header, TLI);
+ ++NumRerolledLoops;
+ return true;
+}
+
+bool LoopReroll::runOnLoop(Loop *L, LPPassManager &LPM) {
+ AA = &getAnalysis<AliasAnalysis>();
+ LI = &getAnalysis<LoopInfo>();
+ SE = &getAnalysis<ScalarEvolution>();
+ TLI = &getAnalysis<TargetLibraryInfo>();
+ DL = getAnalysisIfAvailable<DataLayout>();
+ DT = &getAnalysis<DominatorTree>();
+
+ BasicBlock *Header = L->getHeader();
+ DEBUG(dbgs() << "LRR: F[" << Header->getParent()->getName() <<
+ "] Loop %" << Header->getName() << " (" <<
+ L->getNumBlocks() << " block(s))\n");
+
+ bool Changed = false;
+
+ // For now, we'll handle only single BB loops.
+ if (L->getNumBlocks() > 1)
+ return Changed;
+
+ if (!SE->hasLoopInvariantBackedgeTakenCount(L))
+ return Changed;
+
+ const SCEV *LIBETC = SE->getBackedgeTakenCount(L);
+ const SCEV *IterCount =
+ SE->getAddExpr(LIBETC, SE->getConstant(LIBETC->getType(), 1));
+ DEBUG(dbgs() << "LRR: iteration count = " << *IterCount << "\n");
+
+ // First, we need to find the induction variable with respect to which we can
+ // reroll (there may be several possible options).
+ SmallInstructionVector PossibleIVs;
+ collectPossibleIVs(L, PossibleIVs);
+
+ if (PossibleIVs.empty()) {
+ DEBUG(dbgs() << "LRR: No possible IVs found\n");
+ return Changed;
+ }
+
+ ReductionTracker Reductions;
+ collectPossibleReductions(L, Reductions);
+
+ // For each possible IV, collect the associated possible set of 'root' nodes
+ // (i+1, i+2, etc.).
+ for (SmallInstructionVector::iterator I = PossibleIVs.begin(),
+ IE = PossibleIVs.end(); I != IE; ++I)
+ if (reroll(*I, L, Header, IterCount, Reductions)) {
+ Changed = true;
+ break;
+ }
+
+ return Changed;
+}
+
Modified: llvm/trunk/lib/Transforms/Scalar/Scalar.cpp
URL: http://llvm.org/viewvc/llvm-project/llvm/trunk/lib/Transforms/Scalar/Scalar.cpp?rev=194939&r1=194938&r2=194939&view=diff
==============================================================================
--- llvm/trunk/lib/Transforms/Scalar/Scalar.cpp (original)
+++ llvm/trunk/lib/Transforms/Scalar/Scalar.cpp Sat Nov 16 17:59:05 2013
@@ -44,6 +44,7 @@ void llvm::initializeScalarOpts(PassRegi
initializeLoopInstSimplifyPass(Registry);
initializeLoopRotatePass(Registry);
initializeLoopStrengthReducePass(Registry);
+ initializeLoopRerollPass(Registry);
initializeLoopUnrollPass(Registry);
initializeLoopUnswitchPass(Registry);
initializeLoopIdiomRecognizePass(Registry);
@@ -112,6 +113,10 @@ void LLVMAddLoopRotatePass(LLVMPassManag
unwrap(PM)->add(createLoopRotatePass());
}
+void LLVMAddLoopRerollPass(LLVMPassManagerRef PM) {
+ unwrap(PM)->add(createLoopRerollPass());
+}
+
void LLVMAddLoopUnrollPass(LLVMPassManagerRef PM) {
unwrap(PM)->add(createLoopUnrollPass());
}
Added: llvm/trunk/test/Transforms/LoopReroll/basic.ll
URL: http://llvm.org/viewvc/llvm-project/llvm/trunk/test/Transforms/LoopReroll/basic.ll?rev=194939&view=auto
==============================================================================
--- llvm/trunk/test/Transforms/LoopReroll/basic.ll (added)
+++ llvm/trunk/test/Transforms/LoopReroll/basic.ll Sat Nov 16 17:59:05 2013
@@ -0,0 +1,327 @@
+; RUN: opt < %s -loop-reroll -S | FileCheck %s
+target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
+target triple = "x86_64-unknown-linux-gnu"
+
+; int foo(int a);
+; void bar(int *x) {
+; for (int i = 0; i < 500; i += 3) {
+; foo(i);
+; foo(i+1);
+; foo(i+2);
+; }
+; }
+
+; Function Attrs: nounwind uwtable
+define void @bar(i32* nocapture readnone %x) #0 {
+entry:
+ br label %for.body
+
+for.body: ; preds = %for.body, %entry
+ %i.08 = phi i32 [ 0, %entry ], [ %add3, %for.body ]
+ %call = tail call i32 @foo(i32 %i.08) #1
+ %add = add nsw i32 %i.08, 1
+ %call1 = tail call i32 @foo(i32 %add) #1
+ %add2 = add nsw i32 %i.08, 2
+ %call3 = tail call i32 @foo(i32 %add2) #1
+ %add3 = add nsw i32 %i.08, 3
+ %exitcond = icmp eq i32 %add3, 500
+ br i1 %exitcond, label %for.end, label %for.body
+
+; CHECK-LABEL: @bar
+
+; CHECK: for.body:
+; CHECK: %indvar = phi i32 [ %indvar.next, %for.body ], [ 0, %entry ]
+; CHECK: %call = tail call i32 @foo(i32 %indvar) #1
+; CHECK: %indvar.next = add i32 %indvar, 1
+; CHECK: %exitcond1 = icmp eq i32 %indvar.next, 498
+; CHECK: br i1 %exitcond1, label %for.end, label %for.body
+
+; CHECK: ret
+
+for.end: ; preds = %for.body
+ ret void
+}
+
+declare i32 @foo(i32)
+
+; void hi1(int *x) {
+; for (int i = 0; i < 1500; i += 3) {
+; x[i] = foo(0);
+; x[i+1] = foo(0);
+; x[i+2] = foo(0);
+; }
+; }
+
+; Function Attrs: nounwind uwtable
+define void @hi1(i32* nocapture %x) #0 {
+entry:
+ br label %for.body
+
+for.body: ; preds = %entry, %for.body
+ %indvars.iv = phi i64 [ 0, %entry ], [ %indvars.iv.next, %for.body ]
+ %call = tail call i32 @foo(i32 0) #1
+ %arrayidx = getelementptr inbounds i32* %x, i64 %indvars.iv
+ store i32 %call, i32* %arrayidx, align 4
+ %call1 = tail call i32 @foo(i32 0) #1
+ %0 = add nsw i64 %indvars.iv, 1
+ %arrayidx3 = getelementptr inbounds i32* %x, i64 %0
+ store i32 %call1, i32* %arrayidx3, align 4
+ %call4 = tail call i32 @foo(i32 0) #1
+ %1 = add nsw i64 %indvars.iv, 2
+ %arrayidx7 = getelementptr inbounds i32* %x, i64 %1
+ store i32 %call4, i32* %arrayidx7, align 4
+ %indvars.iv.next = add nuw nsw i64 %indvars.iv, 3
+ %2 = trunc i64 %indvars.iv.next to i32
+ %cmp = icmp slt i32 %2, 1500
+ br i1 %cmp, label %for.body, label %for.end
+
+; CHECK-LABEL: @hi1
+
+; CHECK: for.body:
+; CHECK: %indvar = phi i64 [ %indvar.next, %for.body ], [ 0, %entry ]
+; CHECK: %call = tail call i32 @foo(i32 0) #1
+; CHECK: %arrayidx = getelementptr inbounds i32* %x, i64 %indvar
+; CHECK: store i32 %call, i32* %arrayidx, align 4
+; CHECK: %indvar.next = add i64 %indvar, 1
+; CHECK: %exitcond = icmp eq i64 %indvar.next, 1500
+; CHECK: br i1 %exitcond, label %for.end, label %for.body
+
+; CHECK: ret
+
+for.end: ; preds = %for.body
+ ret void
+}
+
+; void hi2(int *x) {
+; for (int i = 0; i < 500; ++i) {
+; x[3*i] = foo(0);
+; x[3*i+1] = foo(0);
+; x[3*i+2] = foo(0);
+; }
+; }
+
+; Function Attrs: nounwind uwtable
+define void @hi2(i32* nocapture %x) #0 {
+entry:
+ br label %for.body
+
+for.body: ; preds = %for.body, %entry
+ %indvars.iv = phi i64 [ 0, %entry ], [ %indvars.iv.next, %for.body ]
+ %call = tail call i32 @foo(i32 0) #1
+ %0 = mul nsw i64 %indvars.iv, 3
+ %arrayidx = getelementptr inbounds i32* %x, i64 %0
+ store i32 %call, i32* %arrayidx, align 4
+ %call1 = tail call i32 @foo(i32 0) #1
+ %1 = add nsw i64 %0, 1
+ %arrayidx4 = getelementptr inbounds i32* %x, i64 %1
+ store i32 %call1, i32* %arrayidx4, align 4
+ %call5 = tail call i32 @foo(i32 0) #1
+ %2 = add nsw i64 %0, 2
+ %arrayidx9 = getelementptr inbounds i32* %x, i64 %2
+ store i32 %call5, i32* %arrayidx9, align 4
+ %indvars.iv.next = add nuw nsw i64 %indvars.iv, 1
+ %exitcond = icmp eq i64 %indvars.iv.next, 500
+ br i1 %exitcond, label %for.end, label %for.body
+
+; CHECK-LABEL: @hi2
+
+; CHECK: for.body:
+; CHECK: %indvars.iv = phi i64 [ 0, %entry ], [ %indvars.iv.next, %for.body ]
+; CHECK: %call = tail call i32 @foo(i32 0) #1
+; CHECK: %arrayidx = getelementptr inbounds i32* %x, i64 %indvars.iv
+; CHECK: store i32 %call, i32* %arrayidx, align 4
+; CHECK: %indvars.iv.next = add nuw nsw i64 %indvars.iv, 1
+; CHECK: %exitcond1 = icmp eq i64 %indvars.iv.next, 1500
+; CHECK: br i1 %exitcond1, label %for.end, label %for.body
+
+; CHECK: ret
+
+for.end: ; preds = %for.body
+ ret void
+}
+
+; void goo(float alpha, float *a, float *b) {
+; for (int i = 0; i < 3200; i += 5) {
+; a[i] += alpha * b[i];
+; a[i + 1] += alpha * b[i + 1];
+; a[i + 2] += alpha * b[i + 2];
+; a[i + 3] += alpha * b[i + 3];
+; a[i + 4] += alpha * b[i + 4];
+; }
+; }
+
+; Function Attrs: nounwind uwtable
+define void @goo(float %alpha, float* nocapture %a, float* nocapture readonly %b) #0 {
+entry:
+ br label %for.body
+
+for.body: ; preds = %entry, %for.body
+ %indvars.iv = phi i64 [ 0, %entry ], [ %indvars.iv.next, %for.body ]
+ %arrayidx = getelementptr inbounds float* %b, i64 %indvars.iv
+ %0 = load float* %arrayidx, align 4
+ %mul = fmul float %0, %alpha
+ %arrayidx2 = getelementptr inbounds float* %a, i64 %indvars.iv
+ %1 = load float* %arrayidx2, align 4
+ %add = fadd float %1, %mul
+ store float %add, float* %arrayidx2, align 4
+ %2 = add nsw i64 %indvars.iv, 1
+ %arrayidx5 = getelementptr inbounds float* %b, i64 %2
+ %3 = load float* %arrayidx5, align 4
+ %mul6 = fmul float %3, %alpha
+ %arrayidx9 = getelementptr inbounds float* %a, i64 %2
+ %4 = load float* %arrayidx9, align 4
+ %add10 = fadd float %4, %mul6
+ store float %add10, float* %arrayidx9, align 4
+ %5 = add nsw i64 %indvars.iv, 2
+ %arrayidx13 = getelementptr inbounds float* %b, i64 %5
+ %6 = load float* %arrayidx13, align 4
+ %mul14 = fmul float %6, %alpha
+ %arrayidx17 = getelementptr inbounds float* %a, i64 %5
+ %7 = load float* %arrayidx17, align 4
+ %add18 = fadd float %7, %mul14
+ store float %add18, float* %arrayidx17, align 4
+ %8 = add nsw i64 %indvars.iv, 3
+ %arrayidx21 = getelementptr inbounds float* %b, i64 %8
+ %9 = load float* %arrayidx21, align 4
+ %mul22 = fmul float %9, %alpha
+ %arrayidx25 = getelementptr inbounds float* %a, i64 %8
+ %10 = load float* %arrayidx25, align 4
+ %add26 = fadd float %10, %mul22
+ store float %add26, float* %arrayidx25, align 4
+ %11 = add nsw i64 %indvars.iv, 4
+ %arrayidx29 = getelementptr inbounds float* %b, i64 %11
+ %12 = load float* %arrayidx29, align 4
+ %mul30 = fmul float %12, %alpha
+ %arrayidx33 = getelementptr inbounds float* %a, i64 %11
+ %13 = load float* %arrayidx33, align 4
+ %add34 = fadd float %13, %mul30
+ store float %add34, float* %arrayidx33, align 4
+ %indvars.iv.next = add nuw nsw i64 %indvars.iv, 5
+ %14 = trunc i64 %indvars.iv.next to i32
+ %cmp = icmp slt i32 %14, 3200
+ br i1 %cmp, label %for.body, label %for.end
+
+; CHECK-LABEL: @goo
+
+; CHECK: for.body:
+; CHECK: %indvar = phi i64 [ %indvar.next, %for.body ], [ 0, %entry ]
+; CHECK: %arrayidx = getelementptr inbounds float* %b, i64 %indvar
+; CHECK: %0 = load float* %arrayidx, align 4
+; CHECK: %mul = fmul float %0, %alpha
+; CHECK: %arrayidx2 = getelementptr inbounds float* %a, i64 %indvar
+; CHECK: %1 = load float* %arrayidx2, align 4
+; CHECK: %add = fadd float %1, %mul
+; CHECK: store float %add, float* %arrayidx2, align 4
+; CHECK: %indvar.next = add i64 %indvar, 1
+; CHECK: %exitcond = icmp eq i64 %indvar.next, 3200
+; CHECK: br i1 %exitcond, label %for.end, label %for.body
+
+; CHECK: ret
+
+for.end: ; preds = %for.body
+ ret void
+}
+
+; void hoo(float alpha, float *a, float *b, int *ip) {
+; for (int i = 0; i < 3200; i += 5) {
+; a[i] += alpha * b[ip[i]];
+; a[i + 1] += alpha * b[ip[i + 1]];
+; a[i + 2] += alpha * b[ip[i + 2]];
+; a[i + 3] += alpha * b[ip[i + 3]];
+; a[i + 4] += alpha * b[ip[i + 4]];
+; }
+; }
+
+; Function Attrs: nounwind uwtable
+define void @hoo(float %alpha, float* nocapture %a, float* nocapture readonly %b, i32* nocapture readonly %ip) #0 {
+entry:
+ br label %for.body
+
+for.body: ; preds = %entry, %for.body
+ %indvars.iv = phi i64 [ 0, %entry ], [ %indvars.iv.next, %for.body ]
+ %arrayidx = getelementptr inbounds i32* %ip, i64 %indvars.iv
+ %0 = load i32* %arrayidx, align 4
+ %idxprom1 = sext i32 %0 to i64
+ %arrayidx2 = getelementptr inbounds float* %b, i64 %idxprom1
+ %1 = load float* %arrayidx2, align 4
+ %mul = fmul float %1, %alpha
+ %arrayidx4 = getelementptr inbounds float* %a, i64 %indvars.iv
+ %2 = load float* %arrayidx4, align 4
+ %add = fadd float %2, %mul
+ store float %add, float* %arrayidx4, align 4
+ %3 = add nsw i64 %indvars.iv, 1
+ %arrayidx7 = getelementptr inbounds i32* %ip, i64 %3
+ %4 = load i32* %arrayidx7, align 4
+ %idxprom8 = sext i32 %4 to i64
+ %arrayidx9 = getelementptr inbounds float* %b, i64 %idxprom8
+ %5 = load float* %arrayidx9, align 4
+ %mul10 = fmul float %5, %alpha
+ %arrayidx13 = getelementptr inbounds float* %a, i64 %3
+ %6 = load float* %arrayidx13, align 4
+ %add14 = fadd float %6, %mul10
+ store float %add14, float* %arrayidx13, align 4
+ %7 = add nsw i64 %indvars.iv, 2
+ %arrayidx17 = getelementptr inbounds i32* %ip, i64 %7
+ %8 = load i32* %arrayidx17, align 4
+ %idxprom18 = sext i32 %8 to i64
+ %arrayidx19 = getelementptr inbounds float* %b, i64 %idxprom18
+ %9 = load float* %arrayidx19, align 4
+ %mul20 = fmul float %9, %alpha
+ %arrayidx23 = getelementptr inbounds float* %a, i64 %7
+ %10 = load float* %arrayidx23, align 4
+ %add24 = fadd float %10, %mul20
+ store float %add24, float* %arrayidx23, align 4
+ %11 = add nsw i64 %indvars.iv, 3
+ %arrayidx27 = getelementptr inbounds i32* %ip, i64 %11
+ %12 = load i32* %arrayidx27, align 4
+ %idxprom28 = sext i32 %12 to i64
+ %arrayidx29 = getelementptr inbounds float* %b, i64 %idxprom28
+ %13 = load float* %arrayidx29, align 4
+ %mul30 = fmul float %13, %alpha
+ %arrayidx33 = getelementptr inbounds float* %a, i64 %11
+ %14 = load float* %arrayidx33, align 4
+ %add34 = fadd float %14, %mul30
+ store float %add34, float* %arrayidx33, align 4
+ %15 = add nsw i64 %indvars.iv, 4
+ %arrayidx37 = getelementptr inbounds i32* %ip, i64 %15
+ %16 = load i32* %arrayidx37, align 4
+ %idxprom38 = sext i32 %16 to i64
+ %arrayidx39 = getelementptr inbounds float* %b, i64 %idxprom38
+ %17 = load float* %arrayidx39, align 4
+ %mul40 = fmul float %17, %alpha
+ %arrayidx43 = getelementptr inbounds float* %a, i64 %15
+ %18 = load float* %arrayidx43, align 4
+ %add44 = fadd float %18, %mul40
+ store float %add44, float* %arrayidx43, align 4
+ %indvars.iv.next = add nuw nsw i64 %indvars.iv, 5
+ %19 = trunc i64 %indvars.iv.next to i32
+ %cmp = icmp slt i32 %19, 3200
+ br i1 %cmp, label %for.body, label %for.end
+
+; CHECK-LABEL: @hoo
+
+; CHECK: for.body:
+; CHECK: %indvar = phi i64 [ %indvar.next, %for.body ], [ 0, %entry ]
+; CHECK: %arrayidx = getelementptr inbounds i32* %ip, i64 %indvar
+; CHECK: %0 = load i32* %arrayidx, align 4
+; CHECK: %idxprom1 = sext i32 %0 to i64
+; CHECK: %arrayidx2 = getelementptr inbounds float* %b, i64 %idxprom1
+; CHECK: %1 = load float* %arrayidx2, align 4
+; CHECK: %mul = fmul float %1, %alpha
+; CHECK: %arrayidx4 = getelementptr inbounds float* %a, i64 %indvar
+; CHECK: %2 = load float* %arrayidx4, align 4
+; CHECK: %add = fadd float %2, %mul
+; CHECK: store float %add, float* %arrayidx4, align 4
+; CHECK: %indvar.next = add i64 %indvar, 1
+; CHECK: %exitcond = icmp eq i64 %indvar.next, 3200
+; CHECK: br i1 %exitcond, label %for.end, label %for.body
+
+; CHECK: ret
+
+for.end: ; preds = %for.body
+ ret void
+}
+
+attributes #0 = { nounwind uwtable }
+attributes #1 = { nounwind }
+
Added: llvm/trunk/test/Transforms/LoopReroll/reduction.ll
URL: http://llvm.org/viewvc/llvm-project/llvm/trunk/test/Transforms/LoopReroll/reduction.ll?rev=194939&view=auto
==============================================================================
--- llvm/trunk/test/Transforms/LoopReroll/reduction.ll (added)
+++ llvm/trunk/test/Transforms/LoopReroll/reduction.ll Sat Nov 16 17:59:05 2013
@@ -0,0 +1,96 @@
+; RUN: opt < %s -loop-reroll -S | FileCheck %s
+target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
+target triple = "x86_64-unknown-linux-gnu"
+
+define i32 @foo(i32* nocapture readonly %x) #0 {
+entry:
+ br label %for.body
+
+for.body: ; preds = %entry, %for.body
+ %indvars.iv = phi i64 [ 0, %entry ], [ %indvars.iv.next, %for.body ]
+ %r.029 = phi i32 [ 0, %entry ], [ %add12, %for.body ]
+ %arrayidx = getelementptr inbounds i32* %x, i64 %indvars.iv
+ %0 = load i32* %arrayidx, align 4
+ %add = add nsw i32 %0, %r.029
+ %1 = or i64 %indvars.iv, 1
+ %arrayidx3 = getelementptr inbounds i32* %x, i64 %1
+ %2 = load i32* %arrayidx3, align 4
+ %add4 = add nsw i32 %add, %2
+ %3 = or i64 %indvars.iv, 2
+ %arrayidx7 = getelementptr inbounds i32* %x, i64 %3
+ %4 = load i32* %arrayidx7, align 4
+ %add8 = add nsw i32 %add4, %4
+ %5 = or i64 %indvars.iv, 3
+ %arrayidx11 = getelementptr inbounds i32* %x, i64 %5
+ %6 = load i32* %arrayidx11, align 4
+ %add12 = add nsw i32 %add8, %6
+ %indvars.iv.next = add nuw nsw i64 %indvars.iv, 4
+ %7 = trunc i64 %indvars.iv.next to i32
+ %cmp = icmp slt i32 %7, 400
+ br i1 %cmp, label %for.body, label %for.end
+
+; CHECK-LABEL: @foo
+
+; CHECK: for.body:
+; CHECK: %indvar = phi i64 [ %indvar.next, %for.body ], [ 0, %entry ]
+; CHECK: %r.029 = phi i32 [ 0, %entry ], [ %add, %for.body ]
+; CHECK: %arrayidx = getelementptr inbounds i32* %x, i64 %indvar
+; CHECK: %0 = load i32* %arrayidx, align 4
+; CHECK: %add = add nsw i32 %0, %r.029
+; CHECK: %indvar.next = add i64 %indvar, 1
+; CHECK: %exitcond = icmp eq i64 %indvar.next, 400
+; CHECK: br i1 %exitcond, label %for.end, label %for.body
+
+; CHECK: ret
+
+for.end: ; preds = %for.body
+ ret i32 %add12
+}
+
+define float @bar(float* nocapture readonly %x) #0 {
+entry:
+ br label %for.body
+
+for.body: ; preds = %entry, %for.body
+ %indvars.iv = phi i64 [ 0, %entry ], [ %indvars.iv.next, %for.body ]
+ %r.029 = phi float [ 0.0, %entry ], [ %add12, %for.body ]
+ %arrayidx = getelementptr inbounds float* %x, i64 %indvars.iv
+ %0 = load float* %arrayidx, align 4
+ %add = fadd float %0, %r.029
+ %1 = or i64 %indvars.iv, 1
+ %arrayidx3 = getelementptr inbounds float* %x, i64 %1
+ %2 = load float* %arrayidx3, align 4
+ %add4 = fadd float %add, %2
+ %3 = or i64 %indvars.iv, 2
+ %arrayidx7 = getelementptr inbounds float* %x, i64 %3
+ %4 = load float* %arrayidx7, align 4
+ %add8 = fadd float %add4, %4
+ %5 = or i64 %indvars.iv, 3
+ %arrayidx11 = getelementptr inbounds float* %x, i64 %5
+ %6 = load float* %arrayidx11, align 4
+ %add12 = fadd float %add8, %6
+ %indvars.iv.next = add nuw nsw i64 %indvars.iv, 4
+ %7 = trunc i64 %indvars.iv.next to i32
+ %cmp = icmp slt i32 %7, 400
+ br i1 %cmp, label %for.body, label %for.end
+
+; CHECK-LABEL: @bar
+
+; CHECK: for.body:
+; CHECK: %indvar = phi i64 [ %indvar.next, %for.body ], [ 0, %entry ]
+; CHECK: %r.029 = phi float [ 0.000000e+00, %entry ], [ %add, %for.body ]
+; CHECK: %arrayidx = getelementptr inbounds float* %x, i64 %indvar
+; CHECK: %0 = load float* %arrayidx, align 4
+; CHECK: %add = fadd float %0, %r.029
+; CHECK: %indvar.next = add i64 %indvar, 1
+; CHECK: %exitcond = icmp eq i64 %indvar.next, 400
+; CHECK: br i1 %exitcond, label %for.end, label %for.body
+
+; CHECK: ret
+
+for.end: ; preds = %for.body
+ ret float %add12
+}
+
+attributes #0 = { nounwind readonly uwtable }
+
More information about the llvm-commits
mailing list