[llvm-commits] [llvm] r79615 - in /llvm/trunk/test/Analysis/Profiling: ./ 2009-08-21-irregular-loop.ll 2009-08-21-only-one-block.ll 2009-08-21-several-blocks.ll dg.exp

Daniel Dunbar daniel at zuster.org
Mon Aug 24 12:38:47 PDT 2009


Hi Andreas,

I talked with Chris about this the morning, and I think we agreed that
lli based tests for this stuff are ok, as long as we limit them to
just a few. The main thing we basically need lli for is to test the
generation of the profiling information; I think a single solid test
for that would be good enough for now.

We should solve the problem that this requires the JIT, though. A
simple first option is to disable the test if there is no JIT support.
A slightly better one would be to run it using the .bca version of the
profiling information, but that of course requires that the user
configure with llvm-gcc support.

I think we can find ways to test some of the other stuff without using
lli. For example, the static profile provider should be good enough to
test llvm-prof's output.

Sound OK?

 - Daniel

On Fri, Aug 21, 2009 at 8:29 AM, Andreas Neustifter<astifter at gmx.at> wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Chris Lattner wrote:
>>
>> On Aug 21, 2009, at 2:36 AM, Andreas Neustifter wrote:
>>
>>> Author: astifter
>>> Date: Fri Aug 21 04:36:28 2009
>>> New Revision: 79615
>>>
>>> URL: http://llvm.org/viewvc/llvm-project?rev=79615&view=rev
>>> Log:
>>> Added tests for Profiling Infrastructure.
>>
>> Hi Andreas,
>>
>> We'd really prefer to avoid executable (e.g. that run lli) tests in the
>> llvm/test suite.  Is there any other way to do this sort of thing?
>> Among other things, these will fail on hosts that don't have JIT
>> support.  Can you pull this out until after 2.6 branches (today)?
>>
>> -Chris
>
> Yeah, sure. Sorry for the trouble. Pulled in r79633.
>
> I will try to think of another way to test this, I'm not sure if its
> possible tough.
>
> Andi.
>
>>
>>>
>>> Added:
>>>    llvm/trunk/test/Analysis/Profiling/
>>>    llvm/trunk/test/Analysis/Profiling/2009-08-21-irregular-loop.ll
>>>    llvm/trunk/test/Analysis/Profiling/2009-08-21-only-one-block.ll
>>>    llvm/trunk/test/Analysis/Profiling/2009-08-21-several-blocks.ll
>>>    llvm/trunk/test/Analysis/Profiling/dg.exp
>>>
>>> Added: llvm/trunk/test/Analysis/Profiling/2009-08-21-irregular-loop.ll
>>> URL:
>>> http://llvm.org/viewvc/llvm-project/llvm/trunk/test/Analysis/Profiling/2009-08-21-irregular-loop.ll?rev=79615&view=auto
>>>
>>>
>>> ==============================================================================
>>>
>>> --- llvm/trunk/test/Analysis/Profiling/2009-08-21-irregular-loop.ll
>>> (added)
>>> +++ llvm/trunk/test/Analysis/Profiling/2009-08-21-irregular-loop.ll
>>> Fri Aug 21 04:36:28 2009
>>> @@ -0,0 +1,154 @@
>>> +; RUN: llvm-as < %s | opt -insert-edge-profiling > %t1
>>> +; RUN: lli -load %llvmlibsdir/profile_rt%shlibext %t1
>>> +; RUN: lli -load %llvmlibsdir/profile_rt%shlibext %t1 1
>>> +; RUN: lli -load %llvmlibsdir/profile_rt%shlibext %t1 1 2
>>> +; RUN: lli -load %llvmlibsdir/profile_rt%shlibext %t1 1 2 3
>>> +; RUN: lli -load %llvmlibsdir/profile_rt%shlibext %t1 1 2 3 4
>>> +; RUN: mv llvmprof.out %t2
>>> +; RUN: llvm-prof -print-all-code %t1 %t2 | tee %t3 | FileCheck %s
>>> +; CHECK:  1.     5/5 main
>>> +; CHECK:  1.  19.6%    46/235    main() - bb6
>>> +; CHECK:  2.  15.7%    37/235    main() - bb2
>>> +; CHECK:  3.  15.3%    36/235    main() - bb3
>>> +; CHECK:  4.  15.3%    36/235    main() - bb5
>>> +; CHECK:  5.  7.23%    17/235    main() - bb10
>>> +; CHECK:  6.  5.53%    13/235    main() - bb
>>> +; CHECK:  7.  5.11%    12/235    main() - bb9
>>> +; CHECK:  8.  4.26%    10/235    main() - bb1
>>> +; CHECK:  9.  3.83%     9/235    main() - bb7
>>> +; CHECK: 10.  2.55%     6/235    main() - bb11
>>> +; CHECK: 11.  2.13%     5/235    main() - entry
>>> +; CHECK: 12.   1.7%     4/235    main() - bb10.bb11_crit_edge
>>> +; CHECK: 13.  1.28%     3/235    main() - bb8
>>> +; CHECK: 14. 0.426%     1/235    main() - bb4
>>> +; ModuleID = '<stdin>'
>>> +target datalayout =
>>> "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128"
>>>
>>> +target triple = "x86_64-unknown-linux-gnu"
>>> + at .str = internal constant [6 x i8] c"franz\00"        ; <[6 x i8]*>
>>> [#uses=1]
>>> + at .str1 = internal constant [9 x i8] c"argc > 2\00"        ; <[9 x
>>> i8]*> [#uses=1]
>>> + at .str2 = internal constant [9 x i8] c"argc = 1\00"        ; <[9 x
>>> i8]*> [#uses=1]
>>> + at .str3 = internal constant [6 x i8] c"fritz\00"        ; <[6 x i8]*>
>>> [#uses=1]
>>> + at .str4 = internal constant [10 x i8] c"argc <= 1\00"        ; <[10 x
>>> i8]*> [#uses=1]
>>> +
>>> +; CHECK:;;; %main called 5 times.
>>> +; CHECK:;;;
>>> +define i32 @main(i32 %argc, i8** %argv) nounwind {
>>> +entry:
>>> +; CHECK:entry:
>>> +; CHECK:    ;;; Basic block executed 5 times.
>>> +    %argc_addr = alloca i32        ; <i32*> [#uses=4]
>>> +    %argv_addr = alloca i8**        ; <i8***> [#uses=1]
>>> +    %retval = alloca i32        ; <i32*> [#uses=2]
>>> +    %j = alloca i32        ; <i32*> [#uses=4]
>>> +    %i = alloca i32        ; <i32*> [#uses=4]
>>> +    %0 = alloca i32        ; <i32*> [#uses=2]
>>> +    %"alloca point" = bitcast i32 0 to i32        ; <i32> [#uses=0]
>>> +    store i32 %argc, i32* %argc_addr
>>> +    store i8** %argv, i8*** %argv_addr
>>> +    store i32 0, i32* %i, align 4
>>> +    br label %bb10
>>> +; CHECK:    ;;; Out-edge counts: [5.000000e+00 -> bb10]
>>> +
>>> +bb:        ; preds = %bb10
>>> +; CHECK:bb:
>>> +; CHECK:    ;;; Basic block executed 13 times.
>>> +    %1 = load i32* %argc_addr, align 4        ; <i32> [#uses=1]
>>> +    %2 = icmp sgt i32 %1, 1        ; <i1> [#uses=1]
>>> +    br i1 %2, label %bb1, label %bb8
>>> +; CHECK:    ;;; Out-edge counts: [1.000000e+01 -> bb1] [3.000000e+00
>>> -> bb8]
>>> +
>>> +bb1:        ; preds = %bb
>>> +; CHECK:bb1:
>>> +; CHECK:    ;;; Basic block executed 10 times.
>>> +    store i32 0, i32* %j, align 4
>>> +    br label %bb6
>>> +; CHECK:    ;;; Out-edge counts: [1.000000e+01 -> bb6]
>>> +
>>> +bb2:        ; preds = %bb6
>>> +; CHECK:bb2:
>>> +; CHECK:    ;;; Basic block executed 37 times.
>>> +    %3 = call i32 @puts(i8* getelementptr ([6 x i8]* @.str, i64 0,
>>> i64 0)) nounwind        ; <i32> [#uses=0]
>>> +    %4 = load i32* %argc_addr, align 4        ; <i32> [#uses=1]
>>> +    %5 = icmp sgt i32 %4, 2        ; <i1> [#uses=1]
>>> +    br i1 %5, label %bb3, label %bb4
>>> +; CHECK:    ;;; Out-edge counts: [3.600000e+01 -> bb3] [1.000000e+00
>>> -> bb4]
>>> +
>>> +bb3:        ; preds = %bb2
>>> +; CHECK:bb3:
>>> +; CHECK:    ;;; Basic block executed 36 times.
>>> +    %6 = call i32 @puts(i8* getelementptr ([9 x i8]* @.str1, i64 0,
>>> i64 0)) nounwind        ; <i32> [#uses=0]
>>> +    br label %bb5
>>> +; CHECK:    ;;; Out-edge counts: [3.600000e+01 -> bb5]
>>> +
>>> +bb4:        ; preds = %bb2
>>> +; CHECK:bb4:
>>> +; CHECK:    ;;; Basic block executed 1 times.
>>> +    %7 = call i32 @puts(i8* getelementptr ([9 x i8]* @.str2, i64 0,
>>> i64 0)) nounwind        ; <i32> [#uses=0]
>>> +    br label %bb11
>>> +; CHECK:    ;;; Out-edge counts: [1.000000e+00 -> bb11]
>>> +
>>> +bb5:        ; preds = %bb3
>>> +; CHECK:bb5:
>>> +; CHECK:    ;;; Basic block executed 36 times.
>>> +    %8 = call i32 @puts(i8* getelementptr ([6 x i8]* @.str3, i64 0,
>>> i64 0)) nounwind        ; <i32> [#uses=0]
>>> +    %9 = load i32* %j, align 4        ; <i32> [#uses=1]
>>> +    %10 = add i32 %9, 1        ; <i32> [#uses=1]
>>> +    store i32 %10, i32* %j, align 4
>>> +    br label %bb6
>>> +; CHECK:    ;;; Out-edge counts: [3.600000e+01 -> bb6]
>>> +
>>> +bb6:        ; preds = %bb5, %bb1
>>> +; CHECK:bb6:
>>> +; CHECK:    ;;; Basic block executed 46 times.
>>> +    %11 = load i32* %j, align 4        ; <i32> [#uses=1]
>>> +    %12 = load i32* %argc_addr, align 4        ; <i32> [#uses=1]
>>> +    %13 = icmp slt i32 %11, %12        ; <i1> [#uses=1]
>>> +    br i1 %13, label %bb2, label %bb7
>>> +; CHECK:    ;;; Out-edge counts: [3.700000e+01 -> bb2] [9.000000e+00
>>> -> bb7]
>>> +
>>> +bb7:        ; preds = %bb6
>>> +; CHECK:bb7:
>>> +; CHECK:    ;;; Basic block executed 9 times.
>>> +    br label %bb9
>>> +; CHECK:    ;;; Out-edge counts: [9.000000e+00 -> bb9]
>>> +
>>> +bb8:        ; preds = %bb
>>> +; CHECK:bb8:
>>> +; CHECK:    ;;; Basic block executed 3 times.
>>> +    %14 = call i32 @puts(i8* getelementptr ([10 x i8]* @.str4, i64 0,
>>> i64 0)) nounwind        ; <i32> [#uses=0]
>>> +    br label %bb9
>>> +; CHECK:    ;;; Out-edge counts: [3.000000e+00 -> bb9]
>>> +
>>> +bb9:        ; preds = %bb8, %bb7
>>> +; CHECK:bb9:
>>> +; CHECK:    ;;; Basic block executed 12 times.
>>> +    %15 = load i32* %i, align 4        ; <i32> [#uses=1]
>>> +    %16 = add i32 %15, 1        ; <i32> [#uses=1]
>>> +    store i32 %16, i32* %i, align 4
>>> +    br label %bb10
>>> +; CHECK:    ;;; Out-edge counts: [1.200000e+01 -> bb10]
>>> +
>>> +bb10:        ; preds = %bb9, %entry
>>> +; CHECK:    ;;; Basic block executed 17 times.
>>> +    %17 = load i32* %i, align 4        ; <i32> [#uses=1]
>>> +    %18 = icmp ne i32 %17, 3        ; <i1> [#uses=1]
>>> +    br i1 %18, label %bb, label %bb11
>>> +; CHECK:    ;;; Out-edge counts: [1.300000e+01 -> bb] [4.000000e+00
>>> -> bb10.bb11_crit_edge]
>>> +; CHECK:    ;;; Basic block executed 4 times.
>>> +; CHECK:    ;;; Out-edge counts: [5.000000e+00 -> bb11]
>>> +
>>> +bb11:        ; preds = %bb10, %bb4
>>> +; CHECK:bb11:
>>> +; CHECK:    ;;; Basic block executed 6 times.
>>> +    store i32 0, i32* %0, align 4
>>> +    %19 = load i32* %0, align 4        ; <i32> [#uses=1]
>>> +    store i32 %19, i32* %retval, align 4
>>> +    br label %return
>>> +
>>> +return:        ; preds = %bb11
>>> +; CHECK:return:
>>> +    %retval12 = load i32* %retval        ; <i32> [#uses=1]
>>> +    ret i32 %retval12
>>> +}
>>> +
>>> +declare i32 @puts(i8*)
>>>
>>> Added: llvm/trunk/test/Analysis/Profiling/2009-08-21-only-one-block.ll
>>> URL:
>>> http://llvm.org/viewvc/llvm-project/llvm/trunk/test/Analysis/Profiling/2009-08-21-only-one-block.ll?rev=79615&view=auto
>>>
>>>
>>> ==============================================================================
>>>
>>> --- llvm/trunk/test/Analysis/Profiling/2009-08-21-only-one-block.ll
>>> (added)
>>> +++ llvm/trunk/test/Analysis/Profiling/2009-08-21-only-one-block.ll
>>> Fri Aug 21 04:36:28 2009
>>> @@ -0,0 +1,18 @@
>>> +; RUN: llvm-as < %s | opt -insert-edge-profiling > %t1
>>> +; RUN: lli -load %llvmlibsdir/profile_rt%shlibext %t1
>>> +; RUN: mv llvmprof.out %t2
>>> +; RUN: llvm-prof -print-all-code %t1 %t2 | tee %t3 | FileCheck %s
>>> +; CHECK:  1.     1/1 main
>>> +; CHECK:  1.   100%     1/1    main() - entry
>>> +; ModuleID = '<stdin>'
>>> +target datalayout =
>>> "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128"
>>>
>>> +target triple = "x86_64-unknown-linux-gnu"
>>> +
>>> +; CHECK:;;; %main called 1 times.
>>> +; CHECK:;;;
>>> +define i32 @main() nounwind readnone {
>>> +entry:
>>> +; CHECK:entry:
>>> +; CHECK:    ;;; Basic block executed 1 times.
>>> +  ret i32 undef
>>> +}
>>>
>>> Added: llvm/trunk/test/Analysis/Profiling/2009-08-21-several-blocks.ll
>>> URL:
>>> http://llvm.org/viewvc/llvm-project/llvm/trunk/test/Analysis/Profiling/2009-08-21-several-blocks.ll?rev=79615&view=auto
>>>
>>>
>>> ==============================================================================
>>>
>>> --- llvm/trunk/test/Analysis/Profiling/2009-08-21-several-blocks.ll
>>> (added)
>>> +++ llvm/trunk/test/Analysis/Profiling/2009-08-21-several-blocks.ll
>>> Fri Aug 21 04:36:28 2009
>>> @@ -0,0 +1,154 @@
>>> +; RUN: llvm-as < %s | opt -insert-edge-profiling > %t1
>>> +; RUN: lli -load %llvmlibsdir/profile_rt%shlibext %t1
>>> +; RUN: lli -load %llvmlibsdir/profile_rt%shlibext %t1 1
>>> +; RUN: lli -load %llvmlibsdir/profile_rt%shlibext %t1 1 2
>>> +; RUN: lli -load %llvmlibsdir/profile_rt%shlibext %t1 1 2 3
>>> +; RUN: lli -load %llvmlibsdir/profile_rt%shlibext %t1 1 2 3 4
>>> +; RUN: mv llvmprof.out %t2
>>> +; RUN: llvm-prof -print-all-code %t1 %t2 | tee %t3 | FileCheck %s
>>> +; CHECK:  1.     5/5 main
>>> +; CHECK:  1.  19.9%    54/272    main() - bb6
>>> +; CHECK:  2.  15.4%    42/272    main() - bb2
>>> +; CHECK:  3.  15.4%    42/272    main() - bb5
>>> +; CHECK:  4.  13.2%    36/272    main() - bb3
>>> +; CHECK:  5.  7.35%    20/272    main() - bb10
>>> +; CHECK:  6.  5.51%    15/272    main() - bb
>>> +; CHECK:  7.  5.51%    15/272    main() - bb9
>>> +; CHECK:  8.  4.41%    12/272    main() - bb1
>>> +; CHECK:  9.  4.41%    12/272    main() - bb7
>>> +; CHECK: 10.  2.21%     6/272    main() - bb4
>>> +; CHECK: 11.  1.84%     5/272    main() - entry
>>> +; CHECK: 12.  1.84%     5/272    main() - bb11
>>> +; CHECK: 13.  1.84%     5/272    main() - return
>>> +; CHECK: 14.   1.1%     3/272    main() - bb8
>>> +; ModuleID = '<stdin>'
>>> +target datalayout =
>>> "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128"
>>>
>>> +target triple = "x86_64-unknown-linux-gnu"
>>> +
>>> + at .str = private constant [6 x i8] c"franz\00", align 1 ; <[6 x i8]*>
>>> [#uses=1]
>>> + at .str1 = private constant [9 x i8] c"argc > 2\00", align 1 ; <[9 x
>>> i8]*> [#uses=1]
>>> + at .str2 = private constant [9 x i8] c"argc = 1\00", align 1 ; <[9 x
>>> i8]*> [#uses=1]
>>> + at .str3 = private constant [6 x i8] c"fritz\00", align 1 ; <[6 x i8]*>
>>> [#uses=1]
>>> + at .str4 = private constant [10 x i8] c"argc <= 1\00", align 1 ; <[10 x
>>> i8]*> [#uses=1]
>>> +
>>> +; CHECK:;;; %main called 5 times.
>>> +; CHECK:;;;
>>> +define i32 @main(i32 %argc, i8** %argv) nounwind {
>>> +entry:
>>> +; CHECK:entry:
>>> +; CHECK:    ;;; Basic block executed 5 times.
>>> +  %argc_addr = alloca i32                         ; <i32*> [#uses=4]
>>> +  %argv_addr = alloca i8**                        ; <i8***> [#uses=1]
>>> +  %retval = alloca i32                            ; <i32*> [#uses=2]
>>> +  %j = alloca i32                                 ; <i32*> [#uses=4]
>>> +  %i = alloca i32                                 ; <i32*> [#uses=4]
>>> +  %0 = alloca i32                                 ; <i32*> [#uses=2]
>>> +  %"alloca point" = bitcast i32 0 to i32          ; <i32> [#uses=0]
>>> +  store i32 %argc, i32* %argc_addr
>>> +  store i8** %argv, i8*** %argv_addr
>>> +  store i32 0, i32* %i, align 4
>>> +  br label %bb10
>>> +; CHECK:    ;;; Out-edge counts: [5.000000e+00 -> bb10]
>>> +
>>> +bb:                                               ; preds = %bb10
>>> +; CHECK:bb:
>>> +; CHECK:    ;;; Basic block executed 15 times.
>>> +  %1 = load i32* %argc_addr, align 4              ; <i32> [#uses=1]
>>> +  %2 = icmp sgt i32 %1, 1                         ; <i1> [#uses=1]
>>> +  br i1 %2, label %bb1, label %bb8
>>> +; CHECK:    ;;; Out-edge counts: [1.200000e+01 -> bb1] [3.000000e+00
>>> -> bb8]
>>> +
>>> +bb1:                                              ; preds = %bb
>>> +; CHECK:bb1:
>>> +; CHECK:    ;;; Basic block executed 12 times.
>>> +  store i32 0, i32* %j, align 4
>>> +  br label %bb6
>>> +; CHECK:    ;;; Out-edge counts: [1.200000e+01 -> bb6]
>>> +
>>> +bb2:                                              ; preds = %bb6
>>> +; CHECK:bb2:
>>> +; CHECK:    ;;; Basic block executed 42 times.
>>> +  %3 = call i32 @puts(i8* getelementptr ([6 x i8]* @.str, i64 0, i64
>>> 0)) nounwind ; <i32> [#uses=0]
>>> +  %4 = load i32* %argc_addr, align 4              ; <i32> [#uses=1]
>>> +  %5 = icmp sgt i32 %4, 2                         ; <i1> [#uses=1]
>>> +  br i1 %5, label %bb3, label %bb4
>>> +; CHECK:    ;;; Out-edge counts: [3.600000e+01 -> bb3] [6.000000e+00
>>> -> bb4]
>>> +
>>> +bb3:                                              ; preds = %bb2
>>> +; CHECK:bb3:
>>> +; CHECK:    ;;; Basic block executed 36 times.
>>> +  %6 = call i32 @puts(i8* getelementptr ([9 x i8]* @.str1, i64 0, i64
>>> 0)) nounwind ; <i32> [#uses=0]
>>> +  br label %bb5
>>> +; CHECK:    ;;; Out-edge counts: [3.600000e+01 -> bb5]
>>> +
>>> +bb4:                                              ; preds = %bb2
>>> +; CHECK:bb4:
>>> +; CHECK:    ;;; Basic block executed 6 times.
>>> +  %7 = call i32 @puts(i8* getelementptr ([9 x i8]* @.str2, i64 0, i64
>>> 0)) nounwind ; <i32> [#uses=0]
>>> +  br label %bb5
>>> +; CHECK:    ;;; Out-edge counts: [6.000000e+00 -> bb5]
>>> +
>>> +bb5:                                              ; preds = %bb4, %bb3
>>> +; CHECK:bb5:
>>> +; CHECK:    ;;; Basic block executed 42 times.
>>> +  %8 = call i32 @puts(i8* getelementptr ([6 x i8]* @.str3, i64 0, i64
>>> 0)) nounwind ; <i32> [#uses=0]
>>> +  %9 = load i32* %j, align 4                      ; <i32> [#uses=1]
>>> +  %10 = add i32 %9, 1                             ; <i32> [#uses=1]
>>> +  store i32 %10, i32* %j, align 4
>>> +  br label %bb6
>>> +; CHECK:    ;;; Out-edge counts: [4.200000e+01 -> bb6]
>>> +
>>> +bb6:                                              ; preds = %bb5, %bb1
>>> +; CHECK:bb6:
>>> +; CHECK:    ;;; Basic block executed 54 times.
>>> +  %11 = load i32* %j, align 4                     ; <i32> [#uses=1]
>>> +  %12 = load i32* %argc_addr, align 4             ; <i32> [#uses=1]
>>> +  %13 = icmp slt i32 %11, %12                     ; <i1> [#uses=1]
>>> +  br i1 %13, label %bb2, label %bb7
>>> +; CHECK:    ;;; Out-edge counts: [4.200000e+01 -> bb2] [1.200000e+01
>>> -> bb7]
>>> +
>>> +bb7:                                              ; preds = %bb6
>>> +; CHECK:bb7:
>>> +; CHECK:    ;;; Basic block executed 12 times.
>>> +  br label %bb9
>>> +; CHECK:    ;;; Out-edge counts: [1.200000e+01 -> bb9]
>>> +
>>> +bb8:                                              ; preds = %bb
>>> +; CHECK:bb8:
>>> +; CHECK:    ;;; Basic block executed 3 times.
>>> +  %14 = call i32 @puts(i8* getelementptr ([10 x i8]* @.str4, i64 0,
>>> i64 0)) nounwind ; <i32> [#uses=0]
>>> +  br label %bb9
>>> +; CHECK:    ;;; Out-edge counts: [3.000000e+00 -> bb9]
>>> +
>>> +bb9:                                              ; preds = %bb8, %bb7
>>> +; CHECK:bb9:
>>> +; CHECK:    ;;; Basic block executed 15 times.
>>> +  %15 = load i32* %i, align 4                     ; <i32> [#uses=1]
>>> +  %16 = add i32 %15, 1                            ; <i32> [#uses=1]
>>> +  store i32 %16, i32* %i, align 4
>>> +  br label %bb10
>>> +; CHECK:    ;;; Out-edge counts: [1.500000e+01 -> bb10]
>>> +
>>> +bb10:                                             ; preds = %bb9, %entry
>>> +; CHECK:    ;;; Basic block executed 20 times.
>>> +  %17 = load i32* %i, align 4                     ; <i32> [#uses=1]
>>> +  %18 = icmp ne i32 %17, 3                        ; <i1> [#uses=1]
>>> +  br i1 %18, label %bb, label %bb11
>>> +; CHECK:    ;;; Out-edge counts: [1.500000e+01 -> bb] [5.000000e+00
>>> -> bb11]
>>> +
>>> +bb11:                                             ; preds = %bb10
>>> +; CHECK:bb11:
>>> +  store i32 0, i32* %0, align 4
>>> +  %19 = load i32* %0, align 4                     ; <i32> [#uses=1]
>>> +  store i32 %19, i32* %retval, align 4
>>> +  br label %return
>>> +; CHECK:    ;;; Out-edge counts: [5.000000e+00 -> return]
>>> +
>>> +return:                                           ; preds = %bb11
>>> +; CHECK:return:
>>> +; CHECK:    ;;; Basic block executed 5 times.
>>> +  %retval12 = load i32* %retval                   ; <i32> [#uses=1]
>>> +  ret i32 %retval12
>>> +}
>>> +
>>> +declare i32 @puts(i8*)
>>>
>>> Added: llvm/trunk/test/Analysis/Profiling/dg.exp
>>> URL:
>>> http://llvm.org/viewvc/llvm-project/llvm/trunk/test/Analysis/Profiling/dg.exp?rev=79615&view=auto
>>>
>>>
>>> ==============================================================================
>>>
>>> --- llvm/trunk/test/Analysis/Profiling/dg.exp (added)
>>> +++ llvm/trunk/test/Analysis/Profiling/dg.exp Fri Aug 21 04:36:28 2009
>>> @@ -0,0 +1,4 @@
>>> +load_lib llvm.exp
>>> +
>>> +RunLLVMTests [lsort [glob -nocomplain $srcdir/$subdir/*.{ll,c,cpp}]]
>>> +
>>>
>>>
>>> _______________________________________________
>>> llvm-commits mailing list
>>> llvm-commits at cs.uiuc.edu
>>> http://lists.cs.uiuc.edu/mailman/listinfo/llvm-commits
>>
>
> - --
> ==========================================================================
> This email is signed, for more information see
> http://web.student.tuwien.ac.at/~e0325716/gpg.html
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.9 (GNU/Linux)
> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
>
> iEYEARECAAYFAkqOvUMACgkQPiYq0rq7s/BZQwCeLtuLKTvasLikz4nMSPFCF4a2
> rjAAnArEGG2igvcSlsi2YiifI4ibWbVD
> =Ui/1
> -----END PGP SIGNATURE-----
> _______________________________________________
> llvm-commits mailing list
> llvm-commits at cs.uiuc.edu
> http://lists.cs.uiuc.edu/mailman/listinfo/llvm-commits
>




More information about the llvm-commits mailing list