[llvm-commits] CVS: llvm/lib/CodeGen/SelectionDAG/SelectionDAG.cpp
Evan Cheng
evan.cheng at apple.com
Sun Aug 27 01:09:08 PDT 2006
Changes in directory llvm/lib/CodeGen/SelectionDAG:
SelectionDAG.cpp updated: 1.334 -> 1.335
---
Log message:
Eliminate SelectNodeTo() and getTargetNode() variants which take more than
3 SDOperand operands. They are replaced by versions which take an array
of SDOperand and the number of operands.
---
Diffs of the changes: (+12 -254)
SelectionDAG.cpp | 266 ++-----------------------------------------------------
1 files changed, 12 insertions(+), 254 deletions(-)
Index: llvm/lib/CodeGen/SelectionDAG/SelectionDAG.cpp
diff -u llvm/lib/CodeGen/SelectionDAG/SelectionDAG.cpp:1.334 llvm/lib/CodeGen/SelectionDAG/SelectionDAG.cpp:1.335
--- llvm/lib/CodeGen/SelectionDAG/SelectionDAG.cpp:1.334 Sat Aug 26 02:56:00 2006
+++ llvm/lib/CodeGen/SelectionDAG/SelectionDAG.cpp Sun Aug 27 03:08:54 2006
@@ -1908,93 +1908,13 @@
}
SDNode *SelectionDAG::SelectNodeTo(SDNode *N, unsigned TargetOpc,
- MVT::ValueType VT, SDOperand Op1,
- SDOperand Op2, SDOperand Op3,
- SDOperand Op4) {
+ MVT::ValueType VT, const SDOperand *Ops,
+ unsigned NumOps) {
// If an identical node already exists, use it.
SDVTList VTs = getVTList(VT);
SelectionDAGCSEMap::NodeID ID(ISD::BUILTIN_OP_END+TargetOpc, VTs);
- ID.AddOperand(Op1);
- ID.AddOperand(Op2);
- ID.AddOperand(Op3);
- ID.AddOperand(Op4);
- void *IP = 0;
- if (SDNode *ON = CSEMap.FindNodeOrInsertPos(ID, IP))
- return ON;
-
- RemoveNodeFromCSEMaps(N);
- N->MorphNodeTo(ISD::BUILTIN_OP_END+TargetOpc);
- N->setValueTypes(VTs);
- N->setOperands(Op1, Op2, Op3, Op4);
-
- CSEMap.InsertNode(N, IP); // Memoize the new node.
- return N;
-}
-
-SDNode *SelectionDAG::SelectNodeTo(SDNode *N, unsigned TargetOpc,
- MVT::ValueType VT, SDOperand Op1,
- SDOperand Op2, SDOperand Op3,
- SDOperand Op4, SDOperand Op5) {
- SDVTList VTs = getVTList(VT);
- SelectionDAGCSEMap::NodeID ID(ISD::BUILTIN_OP_END+TargetOpc, VTs);
- ID.AddOperand(Op1);
- ID.AddOperand(Op2);
- ID.AddOperand(Op3);
- ID.AddOperand(Op4);
- ID.AddOperand(Op5);
- void *IP = 0;
- if (SDNode *ON = CSEMap.FindNodeOrInsertPos(ID, IP))
- return ON;
-
- RemoveNodeFromCSEMaps(N);
- N->MorphNodeTo(ISD::BUILTIN_OP_END+TargetOpc);
- N->setValueTypes(VTs);
- N->setOperands(Op1, Op2, Op3, Op4, Op5);
-
- CSEMap.InsertNode(N, IP); // Memoize the new node.
- return N;
-}
-
-SDNode *SelectionDAG::SelectNodeTo(SDNode *N, unsigned TargetOpc,
- MVT::ValueType VT, SDOperand Op1,
- SDOperand Op2, SDOperand Op3, SDOperand Op4,
- SDOperand Op5, SDOperand Op6) {
- SDVTList VTs = getVTList(VT);
- SelectionDAGCSEMap::NodeID ID(ISD::BUILTIN_OP_END+TargetOpc, VTs);
- ID.AddOperand(Op1);
- ID.AddOperand(Op2);
- ID.AddOperand(Op3);
- ID.AddOperand(Op4);
- ID.AddOperand(Op5);
- ID.AddOperand(Op6);
- void *IP = 0;
- if (SDNode *ON = CSEMap.FindNodeOrInsertPos(ID, IP))
- return ON;
-
- RemoveNodeFromCSEMaps(N);
- N->MorphNodeTo(ISD::BUILTIN_OP_END+TargetOpc);
- N->setValueTypes(VTs);
- N->setOperands(Op1, Op2, Op3, Op4, Op5, Op6);
-
- CSEMap.InsertNode(N, IP); // Memoize the new node.
- return N;
-}
-
-SDNode *SelectionDAG::SelectNodeTo(SDNode *N, unsigned TargetOpc,
- MVT::ValueType VT, SDOperand Op1,
- SDOperand Op2, SDOperand Op3,SDOperand Op4,
- SDOperand Op5, SDOperand Op6,
- SDOperand Op7) {
- SDVTList VTs = getVTList(VT);
- // If an identical node already exists, use it.
- SelectionDAGCSEMap::NodeID ID(ISD::BUILTIN_OP_END+TargetOpc, VTs);
- ID.AddOperand(Op1);
- ID.AddOperand(Op2);
- ID.AddOperand(Op3);
- ID.AddOperand(Op4);
- ID.AddOperand(Op5);
- ID.AddOperand(Op6);
- ID.AddOperand(Op7);
+ for (unsigned i = 0; i != NumOps; ++i)
+ ID.AddOperand(Ops[i]);
void *IP = 0;
if (SDNode *ON = CSEMap.FindNodeOrInsertPos(ID, IP))
return ON;
@@ -2002,35 +1922,7 @@
RemoveNodeFromCSEMaps(N);
N->MorphNodeTo(ISD::BUILTIN_OP_END+TargetOpc);
N->setValueTypes(VTs);
- N->setOperands(Op1, Op2, Op3, Op4, Op5, Op6, Op7);
-
- CSEMap.InsertNode(N, IP); // Memoize the new node.
- return N;
-}
-SDNode *SelectionDAG::SelectNodeTo(SDNode *N, unsigned TargetOpc,
- MVT::ValueType VT, SDOperand Op1,
- SDOperand Op2, SDOperand Op3,SDOperand Op4,
- SDOperand Op5, SDOperand Op6,
- SDOperand Op7, SDOperand Op8) {
- // If an identical node already exists, use it.
- SDVTList VTs = getVTList(VT);
- SelectionDAGCSEMap::NodeID ID(ISD::BUILTIN_OP_END+TargetOpc, VTs);
- ID.AddOperand(Op1);
- ID.AddOperand(Op2);
- ID.AddOperand(Op3);
- ID.AddOperand(Op4);
- ID.AddOperand(Op5);
- ID.AddOperand(Op6);
- ID.AddOperand(Op7);
- ID.AddOperand(Op8);
- void *IP = 0;
- if (SDNode *ON = CSEMap.FindNodeOrInsertPos(ID, IP))
- return ON;
-
- RemoveNodeFromCSEMaps(N);
- N->MorphNodeTo(ISD::BUILTIN_OP_END+TargetOpc);
- N->setValueTypes(VTs);
- N->setOperands(Op1, Op2, Op3, Op4, Op5, Op6, Op7, Op8);
+ N->setOperands(Ops, NumOps);
CSEMap.InsertNode(N, IP); // Memoize the new node.
return N;
@@ -2075,55 +1967,6 @@
return N;
}
-SDNode *SelectionDAG::SelectNodeTo(SDNode *N, unsigned TargetOpc,
- MVT::ValueType VT1, MVT::ValueType VT2,
- SDOperand Op1, SDOperand Op2,
- SDOperand Op3, SDOperand Op4) {
- // If an identical node already exists, use it.
- SDVTList VTs = getVTList(VT1, VT2);
- SelectionDAGCSEMap::NodeID ID(ISD::BUILTIN_OP_END+TargetOpc, VTs);
- ID.AddOperand(Op1);
- ID.AddOperand(Op2);
- ID.AddOperand(Op3);
- ID.AddOperand(Op4);
- void *IP = 0;
- if (SDNode *ON = CSEMap.FindNodeOrInsertPos(ID, IP))
- return ON;
-
- RemoveNodeFromCSEMaps(N);
- N->MorphNodeTo(ISD::BUILTIN_OP_END+TargetOpc);
- N->setValueTypes(VTs);
- N->setOperands(Op1, Op2, Op3, Op4);
-
- CSEMap.InsertNode(N, IP); // Memoize the new node.
- return N;
-}
-
-SDNode *SelectionDAG::SelectNodeTo(SDNode *N, unsigned TargetOpc,
- MVT::ValueType VT1, MVT::ValueType VT2,
- SDOperand Op1, SDOperand Op2,
- SDOperand Op3, SDOperand Op4,
- SDOperand Op5) {
- // If an identical node already exists, use it.
- SDVTList VTs = getVTList(VT1, VT2);
- SelectionDAGCSEMap::NodeID ID(ISD::BUILTIN_OP_END+TargetOpc, VTs);
- ID.AddOperand(Op1);
- ID.AddOperand(Op2);
- ID.AddOperand(Op3);
- ID.AddOperand(Op4);
- ID.AddOperand(Op5);
- void *IP = 0;
- if (SDNode *ON = CSEMap.FindNodeOrInsertPos(ID, IP))
- return ON;
-
- RemoveNodeFromCSEMaps(N);
- N->MorphNodeTo(ISD::BUILTIN_OP_END+TargetOpc);
- N->setValueTypes(VTs);
- N->setOperands(Op1, Op2, Op3, Op4, Op5);
-
- CSEMap.InsertNode(N, IP); // Memoize the new node.
- return N;
-}
/// getTargetNode - These are used for target selectors to create a new node
/// with specified return type(s), target opcode, and operands.
@@ -2147,37 +1990,6 @@
return getNode(ISD::BUILTIN_OP_END+Opcode, VT, Op1, Op2, Op3).Val;
}
SDNode *SelectionDAG::getTargetNode(unsigned Opcode, MVT::ValueType VT,
- SDOperand Op1, SDOperand Op2, SDOperand Op3,
- SDOperand Op4) {
- return getNode(ISD::BUILTIN_OP_END+Opcode, VT, Op1, Op2, Op3, Op4).Val;
-}
-SDNode *SelectionDAG::getTargetNode(unsigned Opcode, MVT::ValueType VT,
- SDOperand Op1, SDOperand Op2, SDOperand Op3,
- SDOperand Op4, SDOperand Op5) {
- return getNode(ISD::BUILTIN_OP_END+Opcode, VT, Op1, Op2, Op3, Op4, Op5).Val;
-}
-SDNode *SelectionDAG::getTargetNode(unsigned Opcode, MVT::ValueType VT,
- SDOperand Op1, SDOperand Op2, SDOperand Op3,
- SDOperand Op4, SDOperand Op5,
- SDOperand Op6) {
- SDOperand Ops[] = { Op1, Op2, Op3, Op4, Op5, Op6 };
- return getNode(ISD::BUILTIN_OP_END+Opcode, VT, Ops, 6).Val;
-}
-SDNode *SelectionDAG::getTargetNode(unsigned Opcode, MVT::ValueType VT,
- SDOperand Op1, SDOperand Op2, SDOperand Op3,
- SDOperand Op4, SDOperand Op5, SDOperand Op6,
- SDOperand Op7) {
- SDOperand Ops[] = { Op1, Op2, Op3, Op4, Op5, Op6, Op7 };
- return getNode(ISD::BUILTIN_OP_END+Opcode, VT, Ops, 7).Val;
-}
-SDNode *SelectionDAG::getTargetNode(unsigned Opcode, MVT::ValueType VT,
- SDOperand Op1, SDOperand Op2, SDOperand Op3,
- SDOperand Op4, SDOperand Op5, SDOperand Op6,
- SDOperand Op7, SDOperand Op8) {
- SDOperand Ops[] = { Op1, Op2, Op3, Op4, Op5, Op6, Op7, Op8 };
- return getNode(ISD::BUILTIN_OP_END+Opcode, VT, Ops, 8).Val;
-}
-SDNode *SelectionDAG::getTargetNode(unsigned Opcode, MVT::ValueType VT,
const SDOperand *Ops, unsigned NumOps) {
return getNode(ISD::BUILTIN_OP_END+Opcode, VT, Ops, NumOps).Val;
}
@@ -2200,38 +2012,11 @@
SDOperand Ops[] = { Op1, Op2, Op3 };
return getNode(ISD::BUILTIN_OP_END+Opcode, VTs, 2, Ops, 3).Val;
}
-SDNode *SelectionDAG::getTargetNode(unsigned Opcode, MVT::ValueType VT1,
- MVT::ValueType VT2, SDOperand Op1,
- SDOperand Op2, SDOperand Op3,
- SDOperand Op4) {
- const MVT::ValueType *VTs = getNodeValueTypes(VT1, VT2);
- SDOperand Ops[] = { Op1, Op2, Op3, Op4 };
- return getNode(ISD::BUILTIN_OP_END+Opcode, VTs, 2, Ops, 4).Val;
-}
-SDNode *SelectionDAG::getTargetNode(unsigned Opcode, MVT::ValueType VT1,
- MVT::ValueType VT2, SDOperand Op1,
- SDOperand Op2, SDOperand Op3, SDOperand Op4,
- SDOperand Op5) {
- const MVT::ValueType *VTs = getNodeValueTypes(VT1, VT2);
- SDOperand Ops[] = { Op1, Op2, Op3, Op4, Op5 };
- return getNode(ISD::BUILTIN_OP_END+Opcode, VTs, 2, Ops, 5).Val;
-}
-SDNode *SelectionDAG::getTargetNode(unsigned Opcode, MVT::ValueType VT1,
- MVT::ValueType VT2, SDOperand Op1,
- SDOperand Op2, SDOperand Op3, SDOperand Op4,
- SDOperand Op5, SDOperand Op6) {
- const MVT::ValueType *VTs = getNodeValueTypes(VT1, VT2);
- SDOperand Ops[] = { Op1, Op2, Op3, Op4, Op5, Op6 };
- return getNode(ISD::BUILTIN_OP_END+Opcode, VTs, 2, Ops, 6).Val;
-}
-SDNode *SelectionDAG::getTargetNode(unsigned Opcode, MVT::ValueType VT1,
- MVT::ValueType VT2, SDOperand Op1,
- SDOperand Op2, SDOperand Op3, SDOperand Op4,
- SDOperand Op5, SDOperand Op6,
- SDOperand Op7) {
+SDNode *SelectionDAG::getTargetNode(unsigned Opcode, MVT::ValueType VT1,
+ MVT::ValueType VT2,
+ const SDOperand *Ops, unsigned NumOps) {
const MVT::ValueType *VTs = getNodeValueTypes(VT1, VT2);
- SDOperand Ops[] = { Op1, Op2, Op3, Op4, Op5, Op6, Op7 };
- return getNode(ISD::BUILTIN_OP_END+Opcode, VTs, 2, Ops, 7).Val;
+ return getNode(ISD::BUILTIN_OP_END+Opcode, VTs, 2, Ops, NumOps).Val;
}
SDNode *SelectionDAG::getTargetNode(unsigned Opcode, MVT::ValueType VT1,
MVT::ValueType VT2, MVT::ValueType VT3,
@@ -2240,38 +2025,11 @@
SDOperand Ops[] = { Op1, Op2 };
return getNode(ISD::BUILTIN_OP_END+Opcode, VTs, 3, Ops, 2).Val;
}
-SDNode *SelectionDAG::getTargetNode(unsigned Opcode, MVT::ValueType VT1,
- MVT::ValueType VT2, MVT::ValueType VT3,
- SDOperand Op1, SDOperand Op2,
- SDOperand Op3, SDOperand Op4,
- SDOperand Op5) {
- const MVT::ValueType *VTs = getNodeValueTypes(VT1, VT2, VT3);
- SDOperand Ops[] = { Op1, Op2, Op3, Op4, Op5 };
- return getNode(ISD::BUILTIN_OP_END+Opcode, VTs, 3, Ops, 5).Val;
-}
-SDNode *SelectionDAG::getTargetNode(unsigned Opcode, MVT::ValueType VT1,
- MVT::ValueType VT2, MVT::ValueType VT3,
- SDOperand Op1, SDOperand Op2,
- SDOperand Op3, SDOperand Op4, SDOperand Op5,
- SDOperand Op6) {
- const MVT::ValueType *VTs = getNodeValueTypes(VT1, VT2, VT3);
- SDOperand Ops[] = { Op1, Op2, Op3, Op4, Op5, Op6 };
- return getNode(ISD::BUILTIN_OP_END+Opcode, VTs, 3, Ops, 6).Val;
-}
-SDNode *SelectionDAG::getTargetNode(unsigned Opcode, MVT::ValueType VT1,
- MVT::ValueType VT2, MVT::ValueType VT3,
- SDOperand Op1, SDOperand Op2,
- SDOperand Op3, SDOperand Op4, SDOperand Op5,
- SDOperand Op6, SDOperand Op7) {
- const MVT::ValueType *VTs = getNodeValueTypes(VT1, VT2, VT3);
- SDOperand Ops[] = { Op1, Op2, Op3, Op4, Op5, Op6, Op7 };
- return getNode(ISD::BUILTIN_OP_END+Opcode, VTs, 3, Ops, 7).Val;
-}
SDNode *SelectionDAG::getTargetNode(unsigned Opcode, MVT::ValueType VT1,
- MVT::ValueType VT2,
+ MVT::ValueType VT2, MVT::ValueType VT3,
const SDOperand *Ops, unsigned NumOps) {
- const MVT::ValueType *VTs = getNodeValueTypes(VT1, VT2);
- return getNode(ISD::BUILTIN_OP_END+Opcode, VTs, 2, Ops, NumOps).Val;
+ const MVT::ValueType *VTs = getNodeValueTypes(VT1, VT2, VT3);
+ return getNode(ISD::BUILTIN_OP_END+Opcode, VTs, 3, Ops, NumOps).Val;
}
/// ReplaceAllUsesWith - Modify anything using 'From' to use 'To' instead.
More information about the llvm-commits
mailing list