[llvm-commits] CVS: llvm/autoconf/AutoRegen.sh README.TXT configure.ac ltmain.sh
Reid Spencer
reid at x10sys.com
Fri Aug 4 11:18:30 PDT 2006
Changes in directory llvm/autoconf:
AutoRegen.sh updated: 1.13 -> 1.14
README.TXT updated: 1.3 -> 1.4
configure.ac updated: 1.242 -> 1.243
ltmain.sh updated: 1.4 -> 1.5
---
Log message:
Update the auto* tools: autoconf 2.60, libtool 1.5.22, automake 1.9.6.
Update ltld.[ch] to version 1.5.22.
Correct the notes about updating these tools (autoconf/README.TXT)
Add configure options for getting the correct option for including a whole
archive when linking.
---
Diffs of the changes: (+795 -297)
AutoRegen.sh | 22 -
README.TXT | 25 -
configure.ac | 28 +
ltmain.sh | 1017 ++++++++++++++++++++++++++++++++++++++++++-----------------
4 files changed, 795 insertions(+), 297 deletions(-)
Index: llvm/autoconf/AutoRegen.sh
diff -u llvm/autoconf/AutoRegen.sh:1.13 llvm/autoconf/AutoRegen.sh:1.14
--- llvm/autoconf/AutoRegen.sh:1.13 Wed May 31 20:08:28 2006
+++ llvm/autoconf/AutoRegen.sh Fri Aug 4 13:18:08 2006
@@ -7,14 +7,14 @@
configfile=configure.ac
test -d autoconf && test -f autoconf/$configfile && cd autoconf
test -f $configfile || die "Can't find 'autoconf' dir; please cd into it first"
-autoconf --version | grep '2\.59' > /dev/null
-test $? -eq 0 || die "Your autoconf was not detected as being 2.59"
-aclocal --version | grep '^aclocal.*1\.9\.2' > /dev/null
-test $? -eq 0 || die "Your aclocal was not detected as being 1.9.2"
-autoheader --version | grep '^autoheader.*2\.59' > /dev/null
-test $? -eq 0 || die "Your autoheader was not detected as being 2.59"
-libtool --version | grep '1\.5\.10' > /dev/null
-test $? -eq 0 || die "Your libtool was not detected as being 1.5.10"
+autoconf --version | grep '2\.60' > /dev/null
+test $? -eq 0 || die "Your autoconf was not detected as being 2.60"
+aclocal --version | grep '^aclocal.*1\.9\.6' > /dev/null
+test $? -eq 0 || die "Your aclocal was not detected as being 1.9.6"
+autoheader --version | grep '^autoheader.*2\.60' > /dev/null
+test $? -eq 0 || die "Your autoheader was not detected as being 2.60"
+libtool --version | grep '1\.5\.22' > /dev/null
+test $? -eq 0 || die "Your libtool was not detected as being 1.5.22"
echo ""
echo "### NOTE: ############################################################"
echo "### If you get *any* warnings from autoconf below you MUST fix the"
@@ -24,12 +24,12 @@
echo "### present. You should get just three 'Regenerating..' lines."
echo "######################################################################"
echo ""
-echo "Regenerating aclocal.m4 with aclocal 1.9.2"
+echo "Regenerating aclocal.m4 with aclocal 1.9.6"
cwd=`pwd`
aclocal --force -I $cwd/m4 || die "aclocal failed"
-echo "Regenerating configure with autoconf 2.59"
+echo "Regenerating configure with autoconf 2.60"
autoconf --force --warnings=all -o ../$outfile $configfile || die "autoconf failed"
cd ..
-echo "Regenerating config.h.in with autoheader 2.59"
+echo "Regenerating config.h.in with autoheader 2.60"
autoheader --warnings=all -I autoconf -I autoconf/m4 autoconf/$configfile || die "autoheader failed"
exit 0
Index: llvm/autoconf/README.TXT
diff -u llvm/autoconf/README.TXT:1.3 llvm/autoconf/README.TXT:1.4
--- llvm/autoconf/README.TXT:1.3 Thu Dec 23 18:15:20 2004
+++ llvm/autoconf/README.TXT Fri Aug 4 13:18:08 2006
@@ -8,19 +8,28 @@
3. Copy <SRC>/ltdl.m4 to llvm/autoconf/m4
4. Copy <PFX>/share/aclocal/libtool.m4 to llvm/autoconf/m4/libtool.m4
5. Copy <PFX>/share/libtool/ltmain.sh to llvm/autoconf/ltmain.sh
- 6. Run sed -e 's/output.exp/outputname.exp/g' on ltmain.sh
- 7. Copy <PFX>/share/libtool/libltdl/ltdl.c to llvm/lib/System
- 8. Copy <PFX>/share/libtool/libltdl/ltdl.h to llvm/lib/System
- 9. Adjust the llvm/autoconf/m4/libtool.m4 file to ensure that the variable
- default_ofile is set to "mklib" instead of "libtool"
+ 6. Copy <PFX>/share/libtool/libltdl/ltdl.c to llvm/lib/System
+ 7. Copy <PFX>/share/libtool/libltdl/ltdl.h to llvm/lib/System
+ 8. Edit the ltdl.h file to #include "llvm/Config/config.h" at the very top. You
+ might also need to resolve some compiler warnings (typically about
+ comparison of signed vs. unsigned values). But, you won't find out about
+ those until you build LLVM (step 13).
+ 9. Edit the llvm/autoconf/m4/libtool.m4 file so that:
+ a) in AC_PROB_LIBTOOL macro, the value of LIBTOOL is set to
+ $(top_builddir)/mklib, not $(top_builddir)/libtool
+ b) in AC_LIBTOOL_SETUP macro, the variable default_ofile is set to
+ "mklib" instead of "libtool"
+ c) s/AC_ENABLE_SHARED_DEFAULT/enable_shared_default/g
+ d) s/AC_ENABLE_STATIC_DEFAULT/enable_static_default/g
+ e) s/AC_ENABLE_FAST_INSTALL_DEFAULT/enable_fast_install_default/g
10. Run "autoupdate libtool.m4 ltdl.m4" in the llvm/autoconf/m4 directory.
This should correctly update the macro definitions in the libtool m4
files to match the version of autoconf that LLVM uses. This converts
AC_HELP_STRING to AS_HELP_STRING and AC_TRY_LINK to AC_LINK_IFELSE, amongst
other things. You may need to manually adjust the files.
11. Run AutoRegen.sh to get the new macros into configure script
-12. If there are any warnings from configure, go to step 9.
-13. Rebuild LLVM, making sure it reconfigured
+12. If there are any warnings from AutoRegen.sh, go to step 9.
+13. Rebuild LLVM, making sure it reconfigures
14. Test the JIT which uses libltdl
15. If it all works, only THEN commit the changes.
@@ -36,5 +45,5 @@
5. Run autoupdate on all the m4 macros in llvm/autoconf/m4
6. Run autoupdate on llvm/autoconf/configure.ac
7. Regenerate configure script with AutoRegen.sh
- 8. If there are any warnings from autoconf, fix them and go to step 7.
+ 8. If there are any warnings from AutoRegen.sh, fix them and go to step 7.
9. Test, test, test.
Index: llvm/autoconf/configure.ac
diff -u llvm/autoconf/configure.ac:1.242 llvm/autoconf/configure.ac:1.243
--- llvm/autoconf/configure.ac:1.242 Fri Jul 28 17:50:07 2006
+++ llvm/autoconf/configure.ac Fri Aug 4 13:18:08 2006
@@ -102,39 +102,63 @@
[llvm_cv_os_type],
[case $host in
*-*-aix*)
+ llvm_cv_link_all_option="-Wl,--whole-archive"
+ llvm_cv_no_link_all_option="-Wl,--no-whole-archive"
llvm_cv_os_type="AIX"
llvm_cv_platform_type="Unix" ;;
*-*-cygwin*)
+ llvm_cv_link_all_option="-Wl,--whole-archive"
+ llvm_cv_no_link_all_option="-Wl,--no-whole-archive"
llvm_cv_os_type="Cygwin"
llvm_cv_platform_type="Unix" ;;
*-*-darwin*)
+ llvm_cv_link_all_option="-Wl,-all_load"
+ llvm_cv_link_all_option="-Wl,-noall_load"
llvm_cv_os_type="Darwin"
llvm_cv_platform_type="Unix" ;;
*-*-freebsd*)
+ llvm_cv_link_all_option="-Wl,--whole-archive"
+ llvm_cv_no_link_all_option="-Wl,--no-whole-archive"
llvm_cv_os_type="FreeBSD"
llvm_cv_platform_type="Unix" ;;
*-*-openbsd*)
+ llvm_cv_link_all_option="-Wl,--whole-archive"
+ llvm_cv_no_link_all_option="-Wl,--no-whole-archive"
llvm_cv_os_type="OpenBSD"
llvm_cv_platform_type="Unix" ;;
*-*-hpux*)
+ llvm_cv_link_all_option="-Wl,--whole-archive"
+ llvm_cv_no_link_all_option="-Wl,--no-whole-archive"
llvm_cv_os_type="HP-UX"
llvm_cv_platform_type="Unix" ;;
*-*-interix*)
+ llvm_cv_link_all_option="-Wl,--whole-archive"
+ llvm_cv_no_link_all_option="-Wl,--no-whole-archive"
llvm_cv_os_type="Interix"
llvm_cv_platform_type="Unix" ;;
*-*-linux*)
+ llvm_cv_link_all_option="-Wl,--whole-archive"
+ llvm_cv_no_link_all_option="-Wl,--no-whole-archive"
llvm_cv_os_type="Linux"
llvm_cv_platform_type="Unix" ;;
*-*-solaris*)
+ llvm_cv_link_all_option="-Wl,-z,allextract"
+ llvm_cv_no_link_all_option="-Wl,-z,defaultextract"
llvm_cv_os_type="SunOS"
llvm_cv_platform_type="Unix" ;;
*-*-win32*)
+ llvm_cv_link_all_option="-Wl,--whole-archive"
+ llvm_cv_no_link_all_option="-Wl,--no-whole-archive"
llvm_cv_os_type="Win32"
llvm_cv_platform_type="Win32" ;;
*-*-mingw*)
+ llvm_cv_link_all_option="-Wl,--whole-archive"
+ llvm_cv_no_link_all_option="-Wl,--no-whole-archive"
llvm_cv_os_type="MingW"
llvm_cv_platform_type="Win32" ;;
*)
+ llvm_cv_link_all_option=""
+ llvm_cv_no_link_all_option=""
llvm_cv_os_type="Unknown"
llvm_cv_platform_type="Unknown" ;;
esac])
@@ -148,6 +172,10 @@
dnl makefile can configure itself to specific build hosts
AC_SUBST(OS,$llvm_cv_os_type)
+dnl Set the LINKALL and NOLINKALL Makefile variables based on the platform
+AC_SUBST(LINKALL,$llvm_cv_link_all_option)
+AC_SUBST(NOLINKALL,$llvm_cv_no_link_all_option)
+
dnl Set the "LLVM_ON_*" variables based on llvm_cvs_platform_type
dnl This is used by lib/System to determine the basic kind of implementation
dnl to use.
Index: llvm/autoconf/ltmain.sh
diff -u llvm/autoconf/ltmain.sh:1.4 llvm/autoconf/ltmain.sh:1.5
--- llvm/autoconf/ltmain.sh:1.4 Thu Dec 23 18:15:20 2004
+++ llvm/autoconf/ltmain.sh Fri Aug 4 13:18:08 2006
@@ -1,7 +1,7 @@
# ltmain.sh - Provide generalized library-building support services.
# NOTE: Changing this file will not affect anything until you rerun configure.
#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005
# Free Software Foundation, Inc.
# Originally by Gordon Matzigkeit <gord at gnu.ai.mit.edu>, 1996
#
@@ -17,7 +17,7 @@
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
@@ -43,8 +43,8 @@
PROGRAM=ltmain.sh
PACKAGE=libtool
-VERSION=1.5.10
-TIMESTAMP=" (1.1220.2.130 2004/09/19 12:13:49)"
+VERSION=1.5.22
+TIMESTAMP=" (1.1220.2.365 2005/12/18 22:14:06)"
# See if we are running on zsh, and set the options which allow our
# commands through without removal of \ escapes.
@@ -88,14 +88,15 @@
Xsed="${SED}"' -e 1s/^X//'
sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
# test EBCDIC or ASCII
-case `echo A|tr A '\301'` in
- A) # EBCDIC based system
- SP2NL="tr '\100' '\n'"
- NL2SP="tr '\r\n' '\100\100'"
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+ SP2NL='tr \040 \012'
+ NL2SP='tr \015\012 \040\040'
;;
- *) # Assume ASCII based system
- SP2NL="tr '\040' '\012'"
- NL2SP="tr '\015\012' '\040\040'"
+ *) # EBCDIC based system
+ SP2NL='tr \100 \n'
+ NL2SP='tr \r\n \100\100'
;;
esac
@@ -112,8 +113,9 @@
fi
# Make sure IFS has a sensible default
-: ${IFS="
-"}
+lt_nl='
+'
+IFS=" $lt_nl"
if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
$echo "$modename: not configured to build any kind of library" 1>&2
@@ -130,6 +132,8 @@
show="$echo"
show_help=
execute_dlfiles=
+duplicate_deps=no
+preserve_args=
lo2o="s/\\.lo\$/.${objext}/"
o2lo="s/\\.${objext}\$/.lo/"
@@ -137,13 +141,51 @@
# Shell function definitions:
# This seems to be the best place for them
+# func_mktempdir [string]
+# Make a temporary directory that won't clash with other running
+# libtool processes, and avoids race conditions if possible. If
+# given, STRING is the basename for that directory.
+func_mktempdir ()
+{
+ my_template="${TMPDIR-/tmp}/${1-$progname}"
+
+ if test "$run" = ":"; then
+ # Return a directory name, but don't create it in dry-run mode
+ my_tmpdir="${my_template}-$$"
+ else
+
+ # If mktemp works, use that first and foremost
+ my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
+
+ if test ! -d "$my_tmpdir"; then
+ # Failing that, at least try and use $RANDOM to avoid a race
+ my_tmpdir="${my_template}-${RANDOM-0}$$"
+
+ save_mktempdir_umask=`umask`
+ umask 0077
+ $mkdir "$my_tmpdir"
+ umask $save_mktempdir_umask
+ fi
+
+ # If we're not in dry-run mode, bomb out on failure
+ test -d "$my_tmpdir" || {
+ $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2
+ exit $EXIT_FAILURE
+ }
+ fi
+
+ $echo "X$my_tmpdir" | $Xsed
+}
+
+
# func_win32_libid arg
# return the library type of file 'arg'
#
# Need a lot of goo to handle *both* DLLs and import libs
# Has to be a shell function in order to 'eat' the argument
# that is supplied when $file_magic_command is called.
-func_win32_libid () {
+func_win32_libid ()
+{
win32_libid_type="unknown"
win32_fileres=`file -L $1 2>/dev/null`
case $win32_fileres in
@@ -154,12 +196,11 @@
if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \
$EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
win32_nmres=`eval $NM -f posix -A $1 | \
- sed -n -e '1,100{/ I /{x;/import/!{s/^/import/;h;p;};x;};}'`
- if test "X$win32_nmres" = "Ximport" ; then
- win32_libid_type="x86 archive import"
- else
- win32_libid_type="x86 archive static"
- fi
+ $SED -n -e '1,100{/ I /{s,.*,import,;p;q;};}'`
+ case $win32_nmres in
+ import*) win32_libid_type="x86 archive import";;
+ *) win32_libid_type="x86 archive static";;
+ esac
fi
;;
*DLL*)
@@ -183,7 +224,8 @@
# Only attempt this if the compiler in the base compile
# command doesn't match the default compiler.
# arg is usually of the form 'gcc ...'
-func_infer_tag () {
+func_infer_tag ()
+{
if test -n "$available_tags" && test -z "$tagname"; then
CC_quoted=
for arg in $CC; do
@@ -242,8 +284,25 @@
}
+# func_extract_an_archive dir oldlib
+func_extract_an_archive ()
+{
+ f_ex_an_ar_dir="$1"; shift
+ f_ex_an_ar_oldlib="$1"
+
+ $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)"
+ $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $?
+ if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+ :
+ else
+ $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2
+ exit $EXIT_FAILURE
+ fi
+}
+
# func_extract_archives gentop oldlib ...
-func_extract_archives () {
+func_extract_archives ()
+{
my_gentop="$1"; shift
my_oldlibs=${1+"$@"}
my_oldobjs=""
@@ -274,9 +333,9 @@
$run ${rm}r "$my_xdir"
$show "$mkdir $my_xdir"
$run $mkdir "$my_xdir"
- status=$?
- if test "$status" -ne 0 && test ! -d "$my_xdir"; then
- exit $status
+ exit_status=$?
+ if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then
+ exit $exit_status
fi
case $host in
*-darwin*)
@@ -287,7 +346,7 @@
cd $my_xdir || exit $?
darwin_archive=$my_xabs
darwin_curdir=`pwd`
- darwin_base_archive=`basename $darwin_archive`
+ darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'`
darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null`
if test -n "$darwin_arches"; then
darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'`
@@ -296,64 +355,33 @@
for darwin_arch in $darwin_arches ; do
mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
- # Remove the table of contents from the thin files.
- $AR -d "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" __.SYMDEF 2>/dev/null || true
- $AR -d "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" __.SYMDEF\ SORTED 2>/dev/null || true
cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
- $AR -xo "${darwin_base_archive}"
- rm "${darwin_base_archive}"
+ func_extract_an_archive "`pwd`" "${darwin_base_archive}"
cd "$darwin_curdir"
+ $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
done # $darwin_arches
## Okay now we have a bunch of thin objects, gotta fatten them up :)
- darwin_filelist=`find unfat-$$ -type f | xargs basename | sort -u | $NL2SP`
+ darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP`
darwin_file=
darwin_files=
for darwin_file in $darwin_filelist; do
darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
lipo -create -output "$darwin_file" $darwin_files
done # $darwin_filelist
- rm -rf unfat-$$
+ ${rm}r unfat-$$
cd "$darwin_orig_dir"
else
- cd $darwin_orig_dir
- (cd $my_xdir && $AR x $my_xabs) || exit $?
+ cd "$darwin_orig_dir"
+ func_extract_an_archive "$my_xdir" "$my_xabs"
fi # $darwin_arches
fi # $run
- ;;
- *)
- # We will extract separately just the conflicting names and we will
- # no longer touch any unique names. It is faster to leave these
- # extract automatically by $AR in one run.
- $show "(cd $my_xdir && $AR x $my_xabs)"
- $run eval "(cd \$my_xdir && $AR x \$my_xabs)" || exit $?
- if ($AR t "$my_xabs" | sort | sort -uc >/dev/null 2>&1); then
- :
- else
- $echo "$modename: warning: object name conflicts; renaming object files" 1>&2
- $echo "$modename: warning: to ensure that they will not overwrite" 1>&2
- $AR t "$my_xabs" | sort | uniq -cd | while read -r count name
- do
- i=1
- while test "$i" -le "$count"
- do
- # Put our $i before any first dot (extension)
- # Never overwrite any file
- name_to="$name"
- while test "X$name_to" = "X$name" || test -f "$my_xdir/$name_to"
- do
- name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"`
- done
- $show "(cd $my_xdir && $AR xN $i $my_xabs '$name' && $mv '$name' '$name_to')"
- $run eval "(cd \$my_xdir && $AR xN $i \$my_xabs '$name' && $mv '$name' '$name_to')" || exit $?
- i=`expr $i + 1`
- done
- done
- fi
;;
+ *)
+ func_extract_an_archive "$my_xdir" "$my_xabs"
+ ;;
esac
my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
done
-
func_extract_archives_result="$my_oldobjs"
}
# End of Shell function definitions
@@ -362,6 +390,8 @@
# Darwin sucks
eval std_shrext=\"$shrext_cmds\"
+disable_libs=no
+
# Parse our command line options once, thoroughly.
while test "$#" -gt 0
do
@@ -426,10 +456,10 @@
--version)
$echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
$echo
- $echo "Copyright (C) 2003 Free Software Foundation, Inc."
+ $echo "Copyright (C) 2005 Free Software Foundation, Inc."
$echo "This is free software; see the source for copying conditions. There is NO"
$echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
- exit $EXIT_SUCCESS
+ exit $?
;;
--config)
@@ -438,7 +468,7 @@
for tagname in $taglist; do
${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath"
done
- exit $EXIT_SUCCESS
+ exit $?
;;
--debug)
@@ -463,7 +493,7 @@
else
$echo "disable static libraries"
fi
- exit $EXIT_SUCCESS
+ exit $?
;;
--finish) mode="finish" ;;
@@ -478,7 +508,11 @@
preserve_args="$preserve_args $arg"
;;
- --tag) prevopt="--tag" prev=tag ;;
+ --tag)
+ prevopt="--tag"
+ prev=tag
+ preserve_args="$preserve_args --tag"
+ ;;
--tag=*)
set tag "$optarg" ${1+"$@"}
shift
@@ -510,6 +544,18 @@
exit $EXIT_FAILURE
fi
+case $disable_libs in
+no)
+ ;;
+shared)
+ build_libtool_libs=no
+ build_old_libs=yes
+ ;;
+static)
+ build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
+ ;;
+esac
+
# If this variable is set in any of the actions, the command in it
# will be execed at the end. This prevents here-documents from being
# left over by shells.
@@ -520,7 +566,7 @@
# Infer the operation mode.
if test -z "$mode"; then
$echo "*** Warning: inferring the mode of operation is deprecated." 1>&2
- $echo "*** Future versions of Libtool will require -mode=MODE be specified." 1>&2
+ $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2
case $nonopt in
*cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*)
mode=link
@@ -586,7 +632,7 @@
for arg
do
- case "$arg_mode" in
+ case $arg_mode in
arg )
# do not "continue". Instead, add this to base_compile
lastarg="$arg"
@@ -668,7 +714,10 @@
case $lastarg in
# Double-quote args containing other shell metacharacters.
# Many Bourne shells cannot handle close brackets correctly
- # in scan sets, so we specify it separately.
+ # in scan sets, and some SunOS ksh mistreat backslash-escaping
+ # in scan sets (worked around with variable expansion),
+ # and furthermore cannot handle '|' '&' '(' ')' in scan sets
+ # at all, so we specify them separately.
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
lastarg="\"$lastarg\""
;;
@@ -742,6 +791,14 @@
esac
done
+ qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"`
+ case $qlibobj in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ qlibobj="\"$qlibobj\"" ;;
+ esac
+ test "X$libobj" != "X$qlibobj" \
+ && $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' &()|`$[]' \
+ && $echo "$modename: libobj name \`$libobj' may not contain shell special characters."
objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
if test "X$xdir" = "X$obj"; then
@@ -814,12 +871,17 @@
$run $rm $removelist
exit $EXIT_FAILURE
fi
- $echo $srcfile > "$lockfile"
+ $echo "$srcfile" > "$lockfile"
fi
if test -n "$fix_srcfile_path"; then
eval srcfile=\"$fix_srcfile_path\"
fi
+ qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"`
+ case $qsrcfile in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ qsrcfile="\"$qsrcfile\"" ;;
+ esac
$run $rm "$libobj" "${libobj}T"
@@ -841,18 +903,18 @@
fbsd_hideous_sh_bug=$base_compile
if test "$pic_mode" != no; then
- command="$base_compile $srcfile $pic_flag"
+ command="$base_compile $qsrcfile $pic_flag"
else
# Don't build PIC code
- command="$base_compile $srcfile"
+ command="$base_compile $qsrcfile"
fi
if test ! -d "${xdir}$objdir"; then
$show "$mkdir ${xdir}$objdir"
$run $mkdir ${xdir}$objdir
- status=$?
- if test "$status" -ne 0 && test ! -d "${xdir}$objdir"; then
- exit $status
+ exit_status=$?
+ if test "$exit_status" -ne 0 && test ! -d "${xdir}$objdir"; then
+ exit $exit_status
fi
fi
@@ -924,9 +986,9 @@
if test "$build_old_libs" = yes; then
if test "$pic_mode" != yes; then
# Don't build PIC code
- command="$base_compile $srcfile"
+ command="$base_compile $qsrcfile"
else
- command="$base_compile $srcfile $pic_flag"
+ command="$base_compile $qsrcfile $pic_flag"
fi
if test "$compiler_c_o" = yes; then
command="$command -o $obj"
@@ -1055,6 +1117,7 @@
no_install=no
objs=
non_pic_objects=
+ notinst_path= # paths that contain not-installed libtool libraries
precious_files_regex=
prefer_static_libs=no
preload=no
@@ -1083,14 +1146,15 @@
if test -n "$link_static_flag"; then
dlopen_self=$dlopen_self_static
fi
+ prefer_static_libs=yes
else
if test -z "$pic_flag" && test -n "$link_static_flag"; then
dlopen_self=$dlopen_self_static
fi
+ prefer_static_libs=built
fi
build_libtool_libs=no
build_old_libs=yes
- prefer_static_libs=yes
break
;;
esac
@@ -1265,6 +1329,11 @@
if test -z "$pic_object" || test "$pic_object" = none ; then
arg="$non_pic_object"
fi
+ else
+ # If the PIC object exists, use it instead.
+ # $xdir was prepended to $pic_object above.
+ non_pic_object="$pic_object"
+ non_pic_objects="$non_pic_objects $non_pic_object"
fi
else
# Only an error if not doing a dry-run.
@@ -1348,6 +1417,13 @@
prev=
continue
;;
+ darwin_framework|darwin_framework_skip)
+ test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg"
+ compile_command="$compile_command $arg"
+ finalize_command="$finalize_command $arg"
+ prev=
+ continue
+ ;;
*)
eval "$prev=\"\$arg\""
prev=
@@ -1406,6 +1482,18 @@
continue
;;
+ -framework|-arch|-isysroot)
+ case " $CC " in
+ *" ${arg} ${1} "* | *" ${arg} ${1} "*)
+ prev=darwin_framework_skip ;;
+ *) compiler_flags="$compiler_flags $arg"
+ prev=darwin_framework ;;
+ esac
+ compile_command="$compile_command $arg"
+ finalize_command="$finalize_command $arg"
+ continue
+ ;;
+
-inst-prefix-dir)
prev=inst_prefix
continue
@@ -1432,7 +1520,8 @@
absdir=`cd "$dir" && pwd`
if test -z "$absdir"; then
$echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
- exit $EXIT_FAILURE
+ absdir="$dir"
+ notinst_path="$notinst_path $dir"
fi
dir="$absdir"
;;
@@ -1446,10 +1535,15 @@
esac
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+ testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'`
case :$dllsearchpath: in
*":$dir:"*) ;;
*) dllsearchpath="$dllsearchpath:$dir";;
esac
+ case :$dllsearchpath: in
+ *":$testbindir:"*) ;;
+ *) dllsearchpath="$dllsearchpath:$testbindir";;
+ esac
;;
esac
continue
@@ -1458,15 +1552,15 @@
-l*)
if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
case $host in
- *-*-cygwin* | *-*-pw32* | *-*-beos*)
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*)
# These systems don't actually have a C or math library (as such)
continue
;;
- *-*-mingw* | *-*-os2*)
+ *-*-os2*)
# These systems don't actually have a C library (as such)
test "X$arg" = "X-lc" && continue
;;
- *-*-openbsd* | *-*-freebsd*)
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
# Do not include libc due to us having libc/libc_r.
test "X$arg" = "X-lc" && continue
;;
@@ -1474,10 +1568,19 @@
# Rhapsody C and math libraries are in the System framework
deplibs="$deplibs -framework System"
continue
+ ;;
+ *-*-sco3.2v5* | *-*-sco5v6*)
+ # Causes problems with __ctype
+ test "X$arg" = "X-lc" && continue
+ ;;
+ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+ # Compiler inserts libc in the correct place for threads to work
+ test "X$arg" = "X-lc" && continue
+ ;;
esac
elif test "X$arg" = "X-lc_r"; then
case $host in
- *-*-openbsd* | *-*-freebsd*)
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
# Do not include libc_r directly, use -pthread flag.
continue
;;
@@ -1487,8 +1590,20 @@
continue
;;
+ # Tru64 UNIX uses -model [arg] to determine the layout of C++
+ # classes, name mangling, and exception handling.
+ -model)
+ compile_command="$compile_command $arg"
+ compiler_flags="$compiler_flags $arg"
+ finalize_command="$finalize_command $arg"
+ prev=xcompiler
+ continue
+ ;;
+
-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
- deplibs="$deplibs $arg"
+ compiler_flags="$compiler_flags $arg"
+ compile_command="$compile_command $arg"
+ finalize_command="$finalize_command $arg"
continue
;;
@@ -1497,13 +1612,19 @@
continue
;;
- # gcc -m* arguments should be passed to the linker via $compiler_flags
- # in order to pass architecture information to the linker
- # (e.g. 32 vs 64-bit). This may also be accomplished via -Wl,-mfoo
- # but this is not reliable with gcc because gcc may use -mfoo to
- # select a different linker, different libraries, etc, while
- # -Wl,-mfoo simply passes -mfoo to the linker.
- -m*)
+ # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
+ # -r[0-9][0-9]* specifies the processor on the SGI compiler
+ # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
+ # +DA*, +DD* enable 64-bit mode on the HP compiler
+ # -q* pass through compiler args for the IBM compiler
+ # -m* pass through architecture-specific compiler args for GCC
+ # -m*, -t[45]*, -txscale* pass through architecture-specific
+ # compiler args for GCC
+ # -pg pass through profiling flag for GCC
+ # @file GCC response files
+ -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*|-pg| \
+ -t[45]*|-txscale*|@*)
+
# Unknown arguments in both finalize_command and compile_command need
# to be aesthetically quoted because they are evaled later.
arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
@@ -1514,9 +1635,7 @@
esac
compile_command="$compile_command $arg"
finalize_command="$finalize_command $arg"
- if test "$with_gcc" = "yes" ; then
- compiler_flags="$compiler_flags $arg"
- fi
+ compiler_flags="$compiler_flags $arg"
continue
;;
@@ -1754,6 +1873,11 @@
if test -z "$pic_object" || test "$pic_object" = none ; then
arg="$non_pic_object"
fi
+ else
+ # If the PIC object exists, use it instead.
+ # $xdir was prepended to $pic_object above.
+ non_pic_object="$pic_object"
+ non_pic_objects="$non_pic_objects $non_pic_object"
fi
else
# Only an error if not doing a dry-run.
@@ -1859,9 +1983,9 @@
if test ! -d "$output_objdir"; then
$show "$mkdir $output_objdir"
$run $mkdir $output_objdir
- status=$?
- if test "$status" -ne 0 && test ! -d "$output_objdir"; then
- exit $status
+ exit_status=$?
+ if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then
+ exit $exit_status
fi
fi
@@ -1924,7 +2048,6 @@
newlib_search_path=
need_relink=no # whether we're linking any uninstalled libtool libraries
notinst_deplibs= # not-installed libtool libraries
- notinst_path= # paths that contain not-installed libtool libraries
case $linkmode in
lib)
passes="conv link"
@@ -1976,7 +2099,7 @@
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
else
- deplibs="$deplib $deplibs"
+ compiler_flags="$compiler_flags $deplib"
fi
continue
;;
@@ -1985,10 +2108,6 @@
$echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2
continue
fi
- if test "$pass" = conv; then
- deplibs="$deplib $deplibs"
- continue
- fi
name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
for search_ext in .la $std_shrext .so .a; do
@@ -2164,7 +2283,7 @@
esac # case $deplib
if test "$found" = yes || test -f "$lib"; then :
else
- $echo "$modename: cannot find the library \`$lib'" 1>&2
+ $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2
exit $EXIT_FAILURE
fi
@@ -2188,6 +2307,8 @@
# it will not redefine variables installed, or shouldnotlink
installed=yes
shouldnotlink=no
+ avoidtemprpath=
+
# Read the .la file
case $lib in
@@ -2286,6 +2407,7 @@
dir="$libdir"
absdir="$libdir"
fi
+ test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
else
if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
dir="$ladir"
@@ -2370,12 +2492,12 @@
if test -n "$library_names" &&
{ test "$prefer_static_libs" = no || test -z "$old_library"; }; then
# We need to hardcode the library path
- if test -n "$shlibpath_var"; then
+ if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
# Make sure the rpath contains only unique directories.
case "$temp_rpath " in
*" $dir "*) ;;
*" $absdir "*) ;;
- *) temp_rpath="$temp_rpath $dir" ;;
+ *) temp_rpath="$temp_rpath $absdir" ;;
esac
fi
@@ -2412,8 +2534,12 @@
fi
link_static=no # Whether the deplib will be linked statically
+ use_static_libs=$prefer_static_libs
+ if test "$use_static_libs" = built && test "$installed" = yes ; then
+ use_static_libs=no
+ fi
if test -n "$library_names" &&
- { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
+ { test "$use_static_libs" = no || test -z "$old_library"; }; then
if test "$installed" = no; then
notinst_deplibs="$notinst_deplibs $lib"
need_relink=yes
@@ -2526,11 +2652,15 @@
if test "$hardcode_direct" = no; then
add="$dir/$linklib"
case $host in
- *-*-sco3.2v5* ) add_dir="-L$dir" ;;
+ *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
+ *-*-sysv4*uw2*) add_dir="-L$dir" ;;
+ *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
+ *-*-unixware7*) add_dir="-L$dir" ;;
*-*-darwin* )
# if the lib is a module then we can not link against
# it, someone is ignoring the new warnings I added
- if /usr/bin/file -L $add 2> /dev/null | $EGREP "bundle" >/dev/null ; then
+ if /usr/bin/file -L $add 2> /dev/null |
+ $EGREP ": [^:]* bundle" >/dev/null ; then
$echo "** Warning, lib $linklib is a module, not a shared library"
if test -z "$old_library" ; then
$echo
@@ -2561,7 +2691,7 @@
add_dir="-L$dir"
# Try looking first in the location we're being installed to.
if test -n "$inst_prefix_dir"; then
- case "$libdir" in
+ case $libdir in
[\\/]*)
add_dir="$add_dir -L$inst_prefix_dir$libdir"
;;
@@ -2634,7 +2764,7 @@
add_dir="-L$libdir"
# Try looking first in the location we're being installed to.
if test -n "$inst_prefix_dir"; then
- case "$libdir" in
+ case $libdir in
[\\/]*)
add_dir="$add_dir -L$inst_prefix_dir$libdir"
;;
@@ -2695,8 +2825,6 @@
fi
fi
else
- convenience="$convenience $dir/$old_library"
- old_convenience="$old_convenience $dir/$old_library"
deplibs="$dir/$old_library $deplibs"
link_static=yes
fi
@@ -2814,12 +2942,12 @@
*) continue ;;
esac
case " $deplibs " in
- *" $depdepl "*) ;;
- *) deplibs="$depdepl $deplibs" ;;
+ *" $path "*) ;;
+ *) deplibs="$path $deplibs" ;;
esac
case " $deplibs " in
- *" $path "*) ;;
- *) deplibs="$deplibs $path" ;;
+ *" $depdepl "*) ;;
+ *) deplibs="$depdepl $deplibs" ;;
esac
done
fi # link_all_deplibs != no
@@ -3084,27 +3212,27 @@
# Check that each of the things are valid numbers.
case $current in
- 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
*)
- $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2
+ $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2
$echo "$modename: \`$vinfo' is not valid version information" 1>&2
exit $EXIT_FAILURE
;;
esac
case $revision in
- 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
*)
- $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2
+ $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2
$echo "$modename: \`$vinfo' is not valid version information" 1>&2
exit $EXIT_FAILURE
;;
esac
case $age in
- 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
*)
- $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2
+ $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2
$echo "$modename: \`$vinfo' is not valid version information" 1>&2
exit $EXIT_FAILURE
;;
@@ -3283,9 +3411,9 @@
# Eliminate all temporary directories.
for path in $notinst_path; do
- lib_search_path=`$echo "$lib_search_path " | ${SED} -e 's% $path % %g'`
- deplibs=`$echo "$deplibs " | ${SED} -e 's% -L$path % %g'`
- dependency_libs=`$echo "$dependency_libs " | ${SED} -e 's% -L$path % %g'`
+ lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"`
+ deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`
+ dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"`
done
if test -n "$xrpath"; then
@@ -3336,9 +3464,14 @@
*-*-netbsd*)
# Don't link with libc until the a.out ld.so is fixed.
;;
- *-*-openbsd* | *-*-freebsd*)
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
# Do not include libc due to us having libc/libc_r.
- test "X$arg" = "X-lc" && continue
+ ;;
+ *-*-sco3.2v5* | *-*-sco5v6*)
+ # Causes problems with __ctype
+ ;;
+ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+ # Compiler inserts libc in the correct place for threads to work
;;
*)
# Add libc to deplibs on all other systems if necessary.
@@ -3382,11 +3515,11 @@
int main() { return 0; }
EOF
$rm conftest
- $LTCC -o conftest conftest.c $deplibs
+ $LTCC $LTCFLAGS -o conftest conftest.c $deplibs
if test "$?" -eq 0 ; then
ldd_output=`ldd conftest`
for i in $deplibs; do
- name="`expr $i : '-l\(.*\)'`"
+ name=`expr $i : '-l\(.*\)'`
# If $name is empty we are operating on a -L argument.
if test "$name" != "" && test "$name" -ne "0"; then
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
@@ -3423,11 +3556,11 @@
# Error occurred in the first compile. Let's try to salvage
# the situation: Compile a separate program for each library.
for i in $deplibs; do
- name="`expr $i : '-l\(.*\)'`"
+ name=`expr $i : '-l\(.*\)'`
# If $name is empty we are operating on a -L argument.
if test "$name" != "" && test "$name" != "0"; then
$rm conftest
- $LTCC -o conftest conftest.c $i
+ $LTCC $LTCFLAGS -o conftest conftest.c $i
# Did it work?
if test "$?" -eq 0 ; then
ldd_output=`ldd conftest`
@@ -3475,7 +3608,7 @@
set dummy $deplibs_check_method
file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
for a_deplib in $deplibs; do
- name="`expr $a_deplib : '-l\(.*\)'`"
+ name=`expr $a_deplib : '-l\(.*\)'`
# If $name is empty we are operating on a -L argument.
if test "$name" != "" && test "$name" != "0"; then
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
@@ -3544,7 +3677,7 @@
set dummy $deplibs_check_method
match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
for a_deplib in $deplibs; do
- name="`expr $a_deplib : '-l\(.*\)'`"
+ name=`expr $a_deplib : '-l\(.*\)'`
# If $name is empty we are operating on a -L argument.
if test -n "$name" && test "$name" != "0"; then
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
@@ -3674,6 +3807,35 @@
deplibs=$newdeplibs
fi
+
+ # move library search paths that coincide with paths to not yet
+ # installed libraries to the beginning of the library search list
+ new_libs=
+ for path in $notinst_path; do
+ case " $new_libs " in
+ *" -L$path/$objdir "*) ;;
+ *)
+ case " $deplibs " in
+ *" -L$path/$objdir "*)
+ new_libs="$new_libs -L$path/$objdir" ;;
+ esac
+ ;;
+ esac
+ done
+ for deplib in $deplibs; do
+ case $deplib in
+ -L*)
+ case " $new_libs " in
+ *" $deplib "*) ;;
+ *) new_libs="$new_libs $deplib" ;;
+ esac
+ ;;
+ *) new_libs="$new_libs $deplib" ;;
+ esac
+ done
+ deplibs="$new_libs"
+
+
# All the library-specific variables (install_libdir is set above).
library_names=
old_library=
@@ -3757,6 +3919,7 @@
fi
lib="$output_objdir/$realname"
+ linknames=
for link
do
linknames="$linknames $link"
@@ -3785,6 +3948,9 @@
# The command line is too long to execute in one step.
$show "using reloadable object file for export list..."
skipped_export=:
+ # Break out early, otherwise skipped_export may be
+ # set to false by a later but shorter cmd.
+ break
fi
done
IFS="$save_ifs"
@@ -3854,7 +4020,8 @@
fi
fi
- if test "X$skipped_export" != "X:" && len=`expr "X$test_cmds" : ".*"` &&
+ if test "X$skipped_export" != "X:" &&
+ len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
:
else
@@ -3873,6 +4040,7 @@
save_libobjs=$libobjs
fi
save_output=$output
+ output_la=`$echo "X$output" | $Xsed -e "$basename"`
# Clear the reloadable object creation command queue and
# initialize k to one.
@@ -3882,13 +4050,13 @@
delfiles=
last_robj=
k=1
- output=$output_objdir/$save_output-${k}.$objext
+ output=$output_objdir/$output_la-${k}.$objext
# Loop over the list of objects to be linked.
for obj in $save_libobjs
do
eval test_cmds=\"$reload_cmds $objlist $last_robj\"
if test "X$objlist" = X ||
- { len=`expr "X$test_cmds" : ".*"` &&
+ { len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
test "$len" -le "$max_cmd_len"; }; then
objlist="$objlist $obj"
else
@@ -3902,9 +4070,9 @@
# the last one created.
eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
fi
- last_robj=$output_objdir/$save_output-${k}.$objext
+ last_robj=$output_objdir/$output_la-${k}.$objext
k=`expr $k + 1`
- output=$output_objdir/$save_output-${k}.$objext
+ output=$output_objdir/$output_la-${k}.$objext
objlist=$obj
len=1
fi
@@ -3924,13 +4092,13 @@
eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\"
fi
- # Set up a command to remove the reloadale object files
+ # Set up a command to remove the reloadable object files
# after they are used.
i=0
while test "$i" -lt "$k"
do
i=`expr $i + 1`
- delfiles="$delfiles $output_objdir/$save_output-${i}.$objext"
+ delfiles="$delfiles $output_objdir/$output_la-${i}.$objext"
done
$echo "creating a temporary reloadable object file: $output"
@@ -3978,13 +4146,30 @@
IFS="$save_ifs"
eval cmd=\"$cmd\"
$show "$cmd"
- $run eval "$cmd" || exit $?
+ $run eval "$cmd" || {
+ lt_exit=$?
+
+ # Restore the uninstalled library and exit
+ if test "$mode" = relink; then
+ $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
+ fi
+
+ exit $lt_exit
+ }
done
IFS="$save_ifs"
# Restore the uninstalled library and exit
if test "$mode" = relink; then
$run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
+
+ if test -n "$convenience"; then
+ if test -z "$whole_archive_flag_spec"; then
+ $show "${rm}r $gentop"
+ $run ${rm}r "$gentop"
+ fi
+ fi
+
exit $EXIT_SUCCESS
fi
@@ -4166,6 +4351,35 @@
;;
esac
+
+ # move library search paths that coincide with paths to not yet
+ # installed libraries to the beginning of the library search list
+ new_libs=
+ for path in $notinst_path; do
+ case " $new_libs " in
+ *" -L$path/$objdir "*) ;;
+ *)
+ case " $compile_deplibs " in
+ *" -L$path/$objdir "*)
+ new_libs="$new_libs -L$path/$objdir" ;;
+ esac
+ ;;
+ esac
+ done
+ for deplib in $compile_deplibs; do
+ case $deplib in
+ -L*)
+ case " $new_libs " in
+ *" $deplib "*) ;;
+ *) new_libs="$new_libs $deplib" ;;
+ esac
+ ;;
+ *) new_libs="$new_libs $deplib" ;;
+ esac
+ done
+ compile_deplibs="$new_libs"
+
+
compile_command="$compile_command $compile_deplibs"
finalize_command="$finalize_command $finalize_deplibs"
@@ -4210,10 +4424,15 @@
fi
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+ testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'`
case :$dllsearchpath: in
*":$libdir:"*) ;;
*) dllsearchpath="$dllsearchpath:$libdir";;
esac
+ case :$dllsearchpath: in
+ *":$testbindir:"*) ;;
+ *) dllsearchpath="$dllsearchpath:$testbindir";;
+ esac
;;
esac
done
@@ -4329,11 +4548,23 @@
if test -z "$export_symbols"; then
export_symbols="$output_objdir/$outputname.exp"
$run $rm $export_symbols
- $run eval "${SED} -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+ $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+ case $host in
+ *cygwin* | *mingw* )
+ $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+ $run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
+ ;;
+ esac
else
- $run eval "${SED} -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+ $run eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
$run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
$run eval 'mv "$nlist"T "$nlist"'
+ case $host in
+ *cygwin* | *mingw* )
+ $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+ $run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
+ ;;
+ esac
fi
fi
@@ -4384,7 +4615,26 @@
#endif
/* The mapping between symbol names and symbols. */
+"
+
+ case $host in
+ *cygwin* | *mingw* )
+ $echo >> "$output_objdir/$dlsyms" "\
+/* DATA imports from DLLs on WIN32 can't be const, because
+ runtime relocations are performed -- see ld's documentation
+ on pseudo-relocs */
+struct {
+"
+ ;;
+ * )
+ $echo >> "$output_objdir/$dlsyms" "\
const struct {
+"
+ ;;
+ esac
+
+
+ $echo >> "$output_objdir/$dlsyms" "\
const char *name;
lt_ptr address;
}
@@ -4431,16 +4681,29 @@
esac
# Now compile the dynamic symbol file.
- $show "(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
- $run eval '(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
+ $show "(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
+ $run eval '(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
# Clean up the generated files.
$show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
$run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
# Transform the symbol file into the correct name.
- compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+ case $host in
+ *cygwin* | *mingw* )
+ if test -f "$output_objdir/${outputname}.def" ; then
+ compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"`
+ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"`
+ else
+ compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+ fi
+ ;;
+ * )
+ compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+ ;;
+ esac
;;
*)
$echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
@@ -4465,7 +4728,7 @@
# We have no uninstalled library dependencies, so finalize right now.
$show "$link_command"
$run eval "$link_command"
- status=$?
+ exit_status=$?
# Delete the generated files.
if test -n "$dlsyms"; then
@@ -4473,7 +4736,7 @@
$run $rm "$output_objdir/${outputname}S.${objext}"
fi
- exit $status
+ exit $exit_status
fi
if test -n "$shlibpath_var"; then
@@ -4613,10 +4876,12 @@
esac
case $host in
*cygwin* | *mingw* )
- cwrappersource=`$echo ${objdir}/lt-${output}.c`
- cwrapper=`$echo ${output}.exe`
- $rm $cwrappersource $cwrapper
- trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
+ output_name=`basename $output`
+ output_path=`dirname $output`
+ cwrappersource="$output_path/$objdir/lt-$output_name.c"
+ cwrapper="$output_path/$output_name.exe"
+ $rm $cwrappersource $cwrapper
+ trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
cat > $cwrappersource <<EOF
@@ -4641,6 +4906,9 @@
#include <malloc.h>
#include <stdarg.h>
#include <assert.h>
+#include <string.h>
+#include <ctype.h>
+#include <sys/stat.h>
#if defined(PATH_MAX)
# define LT_PATHMAX PATH_MAX
@@ -4651,15 +4919,19 @@
#endif
#ifndef DIR_SEPARATOR
-#define DIR_SEPARATOR '/'
+# define DIR_SEPARATOR '/'
+# define PATH_SEPARATOR ':'
#endif
#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
defined (__OS2__)
-#define HAVE_DOS_BASED_FILE_SYSTEM
-#ifndef DIR_SEPARATOR_2
-#define DIR_SEPARATOR_2 '\\'
-#endif
+# define HAVE_DOS_BASED_FILE_SYSTEM
+# ifndef DIR_SEPARATOR_2
+# define DIR_SEPARATOR_2 '\\'
+# endif
+# ifndef PATH_SEPARATOR_2
+# define PATH_SEPARATOR_2 ';'
+# endif
#endif
#ifndef DIR_SEPARATOR_2
@@ -4669,17 +4941,32 @@
(((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
#endif /* DIR_SEPARATOR_2 */
+#ifndef PATH_SEPARATOR_2
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
+#else /* PATH_SEPARATOR_2 */
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
+#endif /* PATH_SEPARATOR_2 */
+
#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))
#define XFREE(stale) do { \
if (stale) { free ((void *) stale); stale = 0; } \
} while (0)
+/* -DDEBUG is fairly common in CFLAGS. */
+#undef DEBUG
+#if defined DEBUGWRAPPER
+# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__)
+#else
+# define DEBUG(format, ...)
+#endif
+
const char *program_name = NULL;
void * xmalloc (size_t num);
char * xstrdup (const char *string);
-char * basename (const char *name);
-char * fnqualify(const char *path);
+const char * base_name (const char *name);
+char * find_executable(const char *wrapper);
+int check_executable(const char *path);
char * strendzap(char *str, const char *pat);
void lt_fatal (const char *message, ...);
@@ -4689,29 +4976,51 @@
char **newargz;
int i;
- program_name = (char *) xstrdup ((char *) basename (argv[0]));
+ program_name = (char *) xstrdup (base_name (argv[0]));
+ DEBUG("(main) argv[0] : %s\n",argv[0]);
+ DEBUG("(main) program_name : %s\n",program_name);
newargz = XMALLOC(char *, argc+2);
EOF
- cat >> $cwrappersource <<EOF
- newargz[0] = "$SHELL";
+ cat >> $cwrappersource <<EOF
+ newargz[0] = (char *) xstrdup("$SHELL");
EOF
- cat >> $cwrappersource <<"EOF"
- newargz[1] = fnqualify(argv[0]);
+ cat >> $cwrappersource <<"EOF"
+ newargz[1] = find_executable(argv[0]);
+ if (newargz[1] == NULL)
+ lt_fatal("Couldn't find %s", argv[0]);
+ DEBUG("(main) found exe at : %s\n",newargz[1]);
/* we know the script has the same name, without the .exe */
/* so make sure newargz[1] doesn't end in .exe */
strendzap(newargz[1],".exe");
for (i = 1; i < argc; i++)
newargz[i+1] = xstrdup(argv[i]);
newargz[argc+1] = NULL;
+
+ for (i=0; i<argc+1; i++)
+ {
+ DEBUG("(main) newargz[%d] : %s\n",i,newargz[i]);
+ ;
+ }
+
EOF
- cat >> $cwrappersource <<EOF
+ case $host_os in
+ mingw*)
+ cat >> $cwrappersource <<EOF
+ execv("$SHELL",(char const **)newargz);
+EOF
+ ;;
+ *)
+ cat >> $cwrappersource <<EOF
execv("$SHELL",newargz);
EOF
+ ;;
+ esac
- cat >> $cwrappersource <<"EOF"
+ cat >> $cwrappersource <<"EOF"
+ return 127;
}
void *
@@ -4731,48 +5040,148 @@
;
}
-char *
-basename (const char *name)
+const char *
+base_name (const char *name)
{
const char *base;
#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
/* Skip over the disk name in MSDOS pathnames. */
- if (isalpha (name[0]) && name[1] == ':')
+ if (isalpha ((unsigned char)name[0]) && name[1] == ':')
name += 2;
#endif
for (base = name; *name; name++)
if (IS_DIR_SEPARATOR (*name))
base = name + 1;
- return (char *) base;
+ return base;
}
+int
+check_executable(const char * path)
+{
+ struct stat st;
+
+ DEBUG("(check_executable) : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!");
+ if ((!path) || (!*path))
+ return 0;
+
+ if ((stat (path, &st) >= 0) &&
+ (
+ /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */
+#if defined (S_IXOTH)
+ ((st.st_mode & S_IXOTH) == S_IXOTH) ||
+#endif
+#if defined (S_IXGRP)
+ ((st.st_mode & S_IXGRP) == S_IXGRP) ||
+#endif
+ ((st.st_mode & S_IXUSR) == S_IXUSR))
+ )
+ return 1;
+ else
+ return 0;
+}
+
+/* Searches for the full path of the wrapper. Returns
+ newly allocated full path name if found, NULL otherwise */
char *
-fnqualify(const char *path)
+find_executable (const char* wrapper)
{
- size_t size;
- char *p;
+ int has_slash = 0;
+ const char* p;
+ const char* p_next;
+ /* static buffer for getcwd */
char tmp[LT_PATHMAX + 1];
+ int tmp_len;
+ char* concat_name;
+
+ DEBUG("(find_executable) : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!");
- assert(path != NULL);
+ if ((wrapper == NULL) || (*wrapper == '\0'))
+ return NULL;
- /* Is it qualified already? */
+ /* Absolute path? */
#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
- if (isalpha (path[0]) && path[1] == ':')
- return xstrdup (path);
+ if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':')
+ {
+ concat_name = xstrdup (wrapper);
+ if (check_executable(concat_name))
+ return concat_name;
+ XFREE(concat_name);
+ }
+ else
+ {
+#endif
+ if (IS_DIR_SEPARATOR (wrapper[0]))
+ {
+ concat_name = xstrdup (wrapper);
+ if (check_executable(concat_name))
+ return concat_name;
+ XFREE(concat_name);
+ }
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+ }
#endif
- if (IS_DIR_SEPARATOR (path[0]))
- return xstrdup (path);
- /* prepend the current directory */
- /* doesn't handle '~' */
+ for (p = wrapper; *p; p++)
+ if (*p == '/')
+ {
+ has_slash = 1;
+ break;
+ }
+ if (!has_slash)
+ {
+ /* no slashes; search PATH */
+ const char* path = getenv ("PATH");
+ if (path != NULL)
+ {
+ for (p = path; *p; p = p_next)
+ {
+ const char* q;
+ size_t p_len;
+ for (q = p; *q; q++)
+ if (IS_PATH_SEPARATOR(*q))
+ break;
+ p_len = q - p;
+ p_next = (*q == '\0' ? q : q + 1);
+ if (p_len == 0)
+ {
+ /* empty path: current directory */
+ if (getcwd (tmp, LT_PATHMAX) == NULL)
+ lt_fatal ("getcwd failed");
+ tmp_len = strlen(tmp);
+ concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
+ memcpy (concat_name, tmp, tmp_len);
+ concat_name[tmp_len] = '/';
+ strcpy (concat_name + tmp_len + 1, wrapper);
+ }
+ else
+ {
+ concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1);
+ memcpy (concat_name, p, p_len);
+ concat_name[p_len] = '/';
+ strcpy (concat_name + p_len + 1, wrapper);
+ }
+ if (check_executable(concat_name))
+ return concat_name;
+ XFREE(concat_name);
+ }
+ }
+ /* not found in PATH; assume curdir */
+ }
+ /* Relative path | not found in path: prepend cwd */
if (getcwd (tmp, LT_PATHMAX) == NULL)
lt_fatal ("getcwd failed");
- size = strlen(tmp) + 1 + strlen(path) + 1; /* +2 for '/' and '\0' */
- p = XMALLOC(char, size);
- sprintf(p, "%s%c%s", tmp, DIR_SEPARATOR, path);
- return p;
+ tmp_len = strlen(tmp);
+ concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
+ memcpy (concat_name, tmp, tmp_len);
+ concat_name[tmp_len] = '/';
+ strcpy (concat_name + tmp_len + 1, wrapper);
+
+ if (check_executable(concat_name))
+ return concat_name;
+ XFREE(concat_name);
+ return NULL;
}
char *
@@ -4816,16 +5225,16 @@
va_end (ap);
}
EOF
- # we should really use a build-platform specific compiler
- # here, but OTOH, the wrappers (shell script and this C one)
- # are only useful if you want to execute the "real" binary.
- # Since the "real" binary is built for $host, then this
- # wrapper might as well be built for $host, too.
- $run $LTCC -s -o $cwrapper $cwrappersource
- ;;
- esac
- $rm $output
- trap "$rm $output; exit $EXIT_FAILURE" 1 2 15
+ # we should really use a build-platform specific compiler
+ # here, but OTOH, the wrappers (shell script and this C one)
+ # are only useful if you want to execute the "real" binary.
+ # Since the "real" binary is built for $host, then this
+ # wrapper might as well be built for $host, too.
+ $run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource
+ ;;
+ esac
+ $rm $output
+ trap "$rm $output; exit $EXIT_FAILURE" 1 2 15
$echo > $output "\
#! $SHELL
@@ -4975,13 +5384,13 @@
# Backslashes separate directories on plain windows
*-*-mingw | *-*-os2*)
$echo >> $output "\
- exec \$progdir\\\\\$program \${1+\"\$@\"}
+ exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
"
;;
*)
$echo >> $output "\
- exec \$progdir/\$program \${1+\"\$@\"}
+ exec \"\$progdir/\$program\" \${1+\"\$@\"}
"
;;
esac
@@ -4991,7 +5400,7 @@
fi
else
# The program doesn't exist.
- \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2
+ \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
\$echo \"This script is just a wrapper for \$program.\" 1>&2
$echo \"See the $PACKAGE documentation for more information.\" 1>&2
exit $EXIT_FAILURE
@@ -5033,6 +5442,63 @@
if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
cmds=$old_archive_from_new_cmds
else
+ # POSIX demands no paths to be encoded in archives. We have
+ # to avoid creating archives with duplicate basenames if we
+ # might have to extract them afterwards, e.g., when creating a
+ # static archive out of a convenience library, or when linking
+ # the entirety of a libtool archive into another (currently
+ # not supported by libtool).
+ if (for obj in $oldobjs
+ do
+ $echo "X$obj" | $Xsed -e 's%^.*/%%'
+ done | sort | sort -uc >/dev/null 2>&1); then
+ :
+ else
+ $echo "copying selected object files to avoid basename conflicts..."
+
+ if test -z "$gentop"; then
+ gentop="$output_objdir/${outputname}x"
+ generated="$generated $gentop"
+
+ $show "${rm}r $gentop"
+ $run ${rm}r "$gentop"
+ $show "$mkdir $gentop"
+ $run $mkdir "$gentop"
+ exit_status=$?
+ if test "$exit_status" -ne 0 && test ! -d "$gentop"; then
+ exit $exit_status
+ fi
+ fi
+
+ save_oldobjs=$oldobjs
+ oldobjs=
+ counter=1
+ for obj in $save_oldobjs
+ do
+ objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
+ case " $oldobjs " in
+ " ") oldobjs=$obj ;;
+ *[\ /]"$objbase "*)
+ while :; do
+ # Make sure we don't pick an alternate name that also
+ # overlaps.
+ newobj=lt$counter-$objbase
+ counter=`expr $counter + 1`
+ case " $oldobjs " in
+ *[\ /]"$newobj "*) ;;
+ *) if test ! -f "$gentop/$newobj"; then break; fi ;;
+ esac
+ done
+ $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
+ $run ln "$obj" "$gentop/$newobj" ||
+ $run cp "$obj" "$gentop/$newobj"
+ oldobjs="$oldobjs $gentop/$newobj"
+ ;;
+ *) oldobjs="$oldobjs $obj" ;;
+ esac
+ done
+ fi
+
eval cmds=\"$old_archive_cmds\"
if len=`expr "X$cmds" : ".*"` &&
@@ -5046,20 +5512,7 @@
objlist=
concat_cmds=
save_oldobjs=$oldobjs
- # GNU ar 2.10+ was changed to match POSIX; thus no paths are
- # encoded into archives. This makes 'ar r' malfunction in
- # this piecewise linking case whenever conflicting object
- # names appear in distinct ar calls; check, warn and compensate.
- if (for obj in $save_oldobjs
- do
- $echo "X$obj" | $Xsed -e 's%^.*/%%'
- done | sort | sort -uc >/dev/null 2>&1); then
- :
- else
- $echo "$modename: warning: object name conflicts; overriding AR_FLAGS to 'cq'" 1>&2
- $echo "$modename: warning: to ensure that POSIX-compatible ar will work" 1>&2
- AR_FLAGS=cq
- fi
+
# Is there a better way of finding the last object in the list?
for obj in $save_oldobjs
do
@@ -5070,7 +5523,7 @@
oldobjs="$objlist $obj"
objlist="$objlist $obj"
eval test_cmds=\"$old_archive_cmds\"
- if len=`expr "X$test_cmds" : ".*"` &&
+ if len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
test "$len" -le "$max_cmd_len"; then
:
else
@@ -5267,11 +5720,11 @@
# install_prog (especially on Windows NT).
if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
# Allow the use of GNU shtool's install command.
- $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then
+ $echo "X$nonopt" | grep shtool > /dev/null; then
# Aesthetically quote it.
arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
arg="\"$arg\""
;;
esac
@@ -5280,14 +5733,14 @@
shift
else
install_prog=
- arg="$nonopt"
+ arg=$nonopt
fi
# The real first argument should be the name of the installation program.
# Aesthetically quote it.
arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
arg="\"$arg\""
;;
esac
@@ -5305,28 +5758,31 @@
do
if test -n "$dest"; then
files="$files $dest"
- dest="$arg"
+ dest=$arg
continue
fi
case $arg in
-d) isdir=yes ;;
- -f) prev="-f" ;;
- -g) prev="-g" ;;
- -m) prev="-m" ;;
- -o) prev="-o" ;;
+ -f)
+ case " $install_prog " in
+ *[\\\ /]cp\ *) ;;
+ *) prev=$arg ;;
+ esac
+ ;;
+ -g | -m | -o) prev=$arg ;;
-s)
stripme=" -s"
continue
;;
- -*) ;;
-
+ -*)
+ ;;
*)
# If the previous option needed an argument, then skip it.
if test -n "$prev"; then
prev=
else
- dest="$arg"
+ dest=$arg
continue
fi
;;
@@ -5335,7 +5791,7 @@
# Aesthetically quote the argument.
arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
arg="\"$arg\""
;;
esac
@@ -5504,11 +5960,14 @@
if test "$#" -gt 0; then
# Delete the old symlinks, and create new ones.
+ # Try `ln -sf' first, because the `ln' binary might depend on
+ # the symlink we replace! Solaris /bin/ln does not understand -f,
+ # so we also need to try rm && ln -s.
for linkname
do
if test "$linkname" != "$realname"; then
- $show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
- $run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
+ $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
+ $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
fi
done
fi
@@ -5521,7 +5980,16 @@
IFS="$save_ifs"
eval cmd=\"$cmd\"
$show "$cmd"
- $run eval "$cmd" || exit $?
+ $run eval "$cmd" || {
+ lt_exit=$?
+
+ # Restore the uninstalled library and exit
+ if test "$mode" = relink; then
+ $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
+ fi
+
+ exit $lt_exit
+ }
done
IFS="$save_ifs"
fi
@@ -5615,17 +6083,15 @@
notinst_deplibs=
relink_command=
- # To insure that "foo" is sourced, and not "foo.exe",
- # finese the cygwin/MSYS system by explicitly sourcing "foo."
- # which disallows the automatic-append-.exe behavior.
- case $build in
- *cygwin* | *mingw*) wrapperdot=${wrapper}. ;;
- *) wrapperdot=${wrapper} ;;
- esac
+ # Note that it is not necessary on cygwin/mingw to append a dot to
+ # foo even if both foo and FILE.exe exist: automatic-append-.exe
+ # behavior happens only for exec(3), not for open(2)! Also, sourcing
+ # `FILE.' does not work on cygwin managed mounts.
+ #
# If there is no directory component, then add one.
- case $file in
- */* | *\\*) . ${wrapperdot} ;;
- *) . ./${wrapperdot} ;;
+ case $wrapper in
+ */* | *\\*) . ${wrapper} ;;
+ *) . ./${wrapper} ;;
esac
# Check the variables that should have been set.
@@ -5653,34 +6119,21 @@
done
relink_command=
- # To insure that "foo" is sourced, and not "foo.exe",
- # finese the cygwin/MSYS system by explicitly sourcing "foo."
- # which disallows the automatic-append-.exe behavior.
- case $build in
- *cygwin* | *mingw*) wrapperdot=${wrapper}. ;;
- *) wrapperdot=${wrapper} ;;
- esac
+ # Note that it is not necessary on cygwin/mingw to append a dot to
+ # foo even if both foo and FILE.exe exist: automatic-append-.exe
+ # behavior happens only for exec(3), not for open(2)! Also, sourcing
+ # `FILE.' does not work on cygwin managed mounts.
+ #
# If there is no directory component, then add one.
- case $file in
- */* | *\\*) . ${wrapperdot} ;;
- *) . ./${wrapperdot} ;;
+ case $wrapper in
+ */* | *\\*) . ${wrapper} ;;
+ *) . ./${wrapper} ;;
esac
outputname=
if test "$fast_install" = no && test -n "$relink_command"; then
if test "$finalize" = yes && test -z "$run"; then
- tmpdir="/tmp"
- test -n "$TMPDIR" && tmpdir="$TMPDIR"
- tmpdir="$tmpdir/libtool-$$"
- save_umask=`umask`
- umask 0077
- if $mkdir "$tmpdir"; then
- umask $save_umask
- else
- umask $save_umask
- $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2
- continue
- fi
+ tmpdir=`func_mktempdir`
file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`
outputname="$tmpdir/$file"
# Replace the output file specification.
@@ -5704,7 +6157,7 @@
fi
# remove .exe since cygwin /usr/bin/install will append another
- # one anyways
+ # one anyway
case $install_prog,$host in
*/usr/bin/install*,*cygwin*)
case $file:$destfile in
@@ -5804,7 +6257,7 @@
# Exit here if they wanted silent mode.
test "$show" = : && exit $EXIT_SUCCESS
- $echo "----------------------------------------------------------------------"
+ $echo "X----------------------------------------------------------------------" | $Xsed
$echo "Libraries have been installed in:"
for libdir in $libdirs; do
$echo " $libdir"
@@ -5837,7 +6290,7 @@
$echo
$echo "See any operating system documentation about shared libraries for"
$echo "more information, such as the ld(1) and ld.so(8) manual pages."
- $echo "----------------------------------------------------------------------"
+ $echo "X----------------------------------------------------------------------" | $Xsed
exit $EXIT_SUCCESS
;;
@@ -6054,9 +6507,17 @@
rmfiles="$rmfiles $objdir/$n"
done
test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
- test "$mode" = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
- if test "$mode" = uninstall; then
+ case "$mode" in
+ clean)
+ case " $library_names " in
+ # " " in the beginning catches empty $dlname
+ *" $dlname "*) ;;
+ *) rmfiles="$rmfiles $objdir/$dlname" ;;
+ esac
+ test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
+ ;;
+ uninstall)
if test -n "$library_names"; then
# Do each command in the postuninstall commands.
cmds=$postuninstall_cmds
@@ -6089,7 +6550,8 @@
IFS="$save_ifs"
fi
# FIXME: should reinstall the best remaining shared library.
- fi
+ ;;
+ esac
fi
;;
@@ -6374,7 +6836,7 @@
$echo
$echo "Try \`$modename --help' for more information about other modes."
-exit $EXIT_SUCCESS
+exit $?
# The TAGs below are defined such that we never get into a situation
# in which we disable both kinds of libraries. Given conflicting
@@ -6388,12 +6850,11 @@
# configuration. But we'll never go from static-only to shared-only.
# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
-build_libtool_libs=no
-build_old_libs=yes
+disable_libs=shared
# ### END LIBTOOL TAG CONFIG: disable-shared
# ### BEGIN LIBTOOL TAG CONFIG: disable-static
-build_old_libs=`case $build_libtool_libs in yes) $echo no;; *) $echo yes;; esac`
+disable_libs=static
# ### END LIBTOOL TAG CONFIG: disable-static
# Local Variables:
More information about the llvm-commits
mailing list