[llvm-commits] CVS: llvm/lib/Makefile.in
Reid Spencer
reid at x10sys.com
Mon Oct 18 16:56:45 PDT 2004
Changes in directory llvm/lib:
Makefile.in added (r1.1)
---
Log message:
Initial automake generated Makefile template
---
Diffs of the changes: (+657 -0)
Index: llvm/lib/Makefile.in
diff -c /dev/null llvm/lib/Makefile.in:1.1
*** /dev/null Mon Oct 18 18:55:50 2004
--- llvm/lib/Makefile.in Mon Oct 18 18:55:40 2004
***************
*** 0 ****
--- 1,657 ----
+ # Makefile.in generated by automake 1.9.2 from Makefile.am.
+ # @configure_input@
+
+ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+ # 2003, 2004 Free Software Foundation, Inc.
+ # This Makefile.in is free software; the Free Software Foundation
+ # gives unlimited permission to copy and/or distribute it,
+ # with or without modifications, as long as this notice is preserved.
+
+ # This program is distributed in the hope that it will be useful,
+ # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+ # PARTICULAR PURPOSE.
+
+ @SET_MAKE@
+
+ #===-- lib/Makefile.am -- Makefile For Libraries -----------*- Makefile -*--===#
+ #
+ # The LLVM Compiler Infrastructure
+ #
+ # This file was developed by Reid Spencer and is distributed under the
+ # University of Illinois Open Source License. See LICENSE.TXT for details.
+ #
+ #===------------------------------------------------------------------------===#
+
+ #,===-- Makefile.rules.am - Common make rules for LLVM ------*- Makefile -*--===#
+ #
+ # The LLVM Compiler Infrastructure
+ #
+ # This file was developed by Reid Spencer and is distributed under the
+ # University of Illinois Open Source License. See LICENSE.TXT for details.
+ #
+ #===------------------------------------------------------------------------===#
+ srcdir = @srcdir@
+ top_srcdir = @top_srcdir@
+ VPATH = @srcdir@
+ pkgdatadir = $(datadir)/@PACKAGE@
+ pkglibdir = $(libdir)/@PACKAGE@
+ pkgincludedir = $(includedir)/@PACKAGE@
+ top_builddir = ..
+ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+ install_sh_DATA = $(install_sh) -c -m 644
+ install_sh_PROGRAM = $(install_sh) -c
+ install_sh_SCRIPT = $(install_sh) -c
+ INSTALL_HEADER = $(INSTALL_DATA)
+ transform = $(program_transform_name)
+ NORMAL_INSTALL = :
+ PRE_INSTALL = :
+ POST_INSTALL = :
+ NORMAL_UNINSTALL = :
+ PRE_UNINSTALL = :
+ POST_UNINSTALL = :
+ build_triplet = @build@
+ host_triplet = @host@
+ target_triplet = @target@
+ DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+ $(top_srcdir)/Makefile_config
+ subdir = lib
+ ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+ am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+ mkinstalldirs = $(SHELL) $(top_srcdir)/autoconf/mkinstalldirs
+ CONFIG_HEADER = $(top_builddir)/include/llvm/Config/config.h \
+ $(top_builddir)/include/llvm/Support/DataTypes.h \
+ $(top_builddir)/include/llvm/ADT/hash_map \
+ $(top_builddir)/include/llvm/ADT/hash_set \
+ $(top_builddir)/include/llvm/Support/ThreadSupport.h \
+ $(top_builddir)/include/llvm/ADT/iterator
+ CONFIG_CLEAN_FILES =
+ SOURCES =
+ DIST_SOURCES =
+ RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ CTAGS = ctags
+ DEJATOOL = $(PACKAGE)
+ RUNTESTDEFAULTFLAGS = --tool $$tool --srcdir $$srcdir
+ EXPECT = expect
+ RUNTEST = runtest
+ DIST_SUBDIRS = $(SUBDIRS)
+ DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ INSTALL = @INSTALL@
+ ACLOCAL = @ACLOCAL@
+ ALLOCA = @ALLOCA@
+ AMDEP_FALSE = @AMDEP_FALSE@
+ AMDEP_TRUE = @AMDEP_TRUE@
+ AMTAR = @AMTAR@
+ AR = @AR@
+
+ # Target hardware architecture
+ ARCH = @ARCH@
+ ARCH_PPC_FALSE = @ARCH_PPC_FALSE@
+ ARCH_PPC_TRUE = @ARCH_PPC_TRUE@
+ ARCH_SPARC_FALSE = @ARCH_SPARC_FALSE@
+ ARCH_SPARC_TRUE = @ARCH_SPARC_TRUE@
+ ARCH_UNKNOWN_FALSE = @ARCH_UNKNOWN_FALSE@
+ ARCH_UNKNOWN_TRUE = @ARCH_UNKNOWN_TRUE@
+ ARCH_X86_FALSE = @ARCH_X86_FALSE@
+ ARCH_X86_TRUE = @ARCH_X86_TRUE@
+ AUTOCONF = @AUTOCONF@
+ AUTOHEADER = @AUTOHEADER@
+ AUTOMAKE = @AUTOMAKE@
+ AWK = @AWK@
+ BISON = @BISON@
+ BUILDMODE := @BUILDMODE@
+
+ # Path to the CC binary, which use used by testcases for native builds.
+ CC := @CC@
+ CCDEPMODE = @CCDEPMODE@
+ CFLAGS = @CFLAGS@
+ CPP = @CPP@
+ CPPFLAGS = @CPPFLAGS@
+
+ # Path to the C++ compiler to use. This is an optional setting, which defaults
+ # to whatever your gmake defaults to.
+ CXX = @CXX@
+ CXXCPP = @CXXCPP@
+ CXXDEPMODE = @CXXDEPMODE@
+ CXXFLAGS = @CXXFLAGS@
+ CYGPATH_W = @CYGPATH_W@
+ DEFS = @DEFS@
+ DEPDIR = @DEPDIR@
+ DOT = @DOT@
+ ECHO = echo
+ ECHO_C = @ECHO_C@
+ ECHO_N = @ECHO_N@
+ ECHO_T = @ECHO_T@
+ EGREP = @EGREP@
+ ENABLE_OPTIMIZED = @ENABLE_OPTIMIZED@
+ ENABLE_PROFILED = @ENABLE_PROFILED@
+
+ # Endian-ness of the target
+ ENDIAN = @ENDIAN@
+ ETAGS = @ETAGS@
+ ETAGSFLAGS = @ETAGSFLAGS@
+
+ # Executable file extension for this platform.
+ EXEEXT = @EXEEXT@
+ F77 = @F77@
+ FFLAGS = @FFLAGS@
+ FLEX = @LEX@
+ HAVE_BZIP2 = @HAVE_BZIP2@
+ HAVE_ZLIB = @HAVE_ZLIB@
+ INSTALL_DATA = @INSTALL_DATA@
+ INSTALL_PROGRAM = @INSTALL_PROGRAM@
+ INSTALL_SCRIPT = @INSTALL_SCRIPT@
+ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+ JIT = @JIT@
+
+ # Linker flags.
+ LDFLAGS = @LDFLAGS@ @LDFLAGS@
+ LEX = @LEX@
+ LEXLIB = @LEXLIB@
+ LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+ LIBOBJS = @LIBOBJS@
+ LIBS = @LIBS@
+ LIBTOOL = @LIBTOOL@
+ LLVMCC1 = @LLVMCC1@
+ LLVMCC1PLUS = @LLVMCC1PLUS@
+
+ # Path to location for LLVM C/C++ front-end. You can modify this if you
+ # want to override the value set by configure.
+ LLVMGCCDIR := @LLVMGCCDIR@
+ LLVM_BINDIR := @LLVM_BINDIR@
+ LLVM_CONFIGTIME = @LLVM_CONFIGTIME@
+ LLVM_DATADIR := @LLVM_DATADIR@
+ LLVM_DOCSDIR := @LLVM_DOCSDIR@
+ LLVM_ETCDIR := @LLVM_ETCDIR@
+ LLVM_INCLUDEDIR := @LLVM_INCLUDEDIR@
+ LLVM_INFODIR := @LLVM_INFODIR@
+ LLVM_LIBDIR := @LLVM_LIBDIR@
+ LLVM_MANDIR := @LLVM_MANDIR@
+
+ # Autoconf configured values
+ LLVM_PREFIX := @LLVM_PREFIX@
+ LN_S = @LN_S@
+ LTLIBOBJS = @LTLIBOBJS@
+ MAKEINFO = @MAKEINFO@
+ MMAP_FILE = @MMAP_FILE@
+ OBJEXT = @OBJEXT@
+
+ # Target operating system for which LLVM will be compiled.
+ OS = @OS@
+ PACKAGE = @PACKAGE@
+ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+ PACKAGE_NAME = @PACKAGE_NAME@
+ PACKAGE_STRING = @PACKAGE_STRING@
+ PACKAGE_TARNAME = @PACKAGE_TARNAME@
+ PACKAGE_VERSION = @PACKAGE_VERSION@
+ PATH_SEPARATOR = @PATH_SEPARATOR@
+
+ # Path to the Python interpreter
+ PYTHON := @PYTHON@
+ QMTEST = @QMTEST@
+ RANLIB = @RANLIB@
+ SET_MAKE = @SET_MAKE@
+ SHELL = @SHELL@
+
+ # Shared library extension for this platform.
+ SHLIBEXT = @SHLIBEXT@
+ STRIP = @STRIP@
+ VERSION = @VERSION@
+
+ # The pathnames of the Flex and Bison programs, respectively.
+ YACC = @YACC@
+ ac_ct_AR = @ac_ct_AR@
+ ac_ct_CC = @ac_ct_CC@
+ ac_ct_CXX = @ac_ct_CXX@
+ ac_ct_F77 = @ac_ct_F77@
+ ac_ct_RANLIB = @ac_ct_RANLIB@
+ ac_ct_STRIP = @ac_ct_STRIP@
+ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+ am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+ am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
+ am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
+ am__include = @am__include@
+ am__leading_dot = @am__leading_dot@
+ am__quote = @am__quote@
+ am__tar = @am__tar@
+ am__untar = @am__untar@
+ bindir = @bindir@
+ build = @build@
+ build_alias = @build_alias@
+ build_cpu = @build_cpu@
+ build_os = @build_os@
+ build_vendor = @build_vendor@
+ datadir = @datadir@
+ exec_prefix = @exec_prefix@
+ host = @host@
+ host_alias = @host_alias@
+ host_cpu = @host_cpu@
+ host_os = @host_os@
+ host_vendor = @host_vendor@
+ ifGNUmake = @ifGNUmake@
+ includedir = @includedir@
+ infodir = @infodir@
+ install_sh = @install_sh@
+ libdir = @libdir@
+ libexecdir = @libexecdir@
+ localstatedir = @localstatedir@
+ mandir = @mandir@
+ mkdir_p = @mkdir_p@
+ oldincludedir = @oldincludedir@
+ prefix = @prefix@
+ program_transform_name = @program_transform_name@
+ sbindir = @sbindir@
+ sharedstatedir = @sharedstatedir@
+ subdirs = @subdirs@
+ sysconfdir = @sysconfdir@
+ target = @target@
+ target_alias = @target_alias@
+ target_cpu = @target_cpu@
+ target_os = @target_os@
+ target_vendor = @target_vendor@
+
+ # Options for all automake makefiles
+ ACLOCAL_AMFLAGS = -I autoconf -I autoconf/m4 --output=autoconf/aclocal.m4
+ AUTOMAKE_OPTIONS = foreign dejagnu dist-zip nostdinc
+
+ # Libraries needed by tools
+ TOOLLINKOPTS = @LIBS@
+
+ # Path to the library archiver program.
+ AR_PATH = @AR@
+
+ # Paths to miscellaneous programs.
+ RPWD = pwd
+ SED = sed
+ RM = rm
+ CP = cp
+ LN = ln
+ CMP = cmp
+ MKDIR = @abs_top_srcdir@/autoconf/mkinstalldirs
+ DATE = date
+ MV = mv
+ VERB := @
+ IGNORE := true
+
+ # Determine the target for which LLVM should generate code.
+ LLVMGCCARCH := @target@/3.4-llvm
+
+ # Full pathnames of LLVM C/C++ front-end 'cc1' and 'cc1plus' binaries:
+ LCC1 = @LLVMCC1@
+ LCC1XX = @LLVMCC1PLUS@
+
+ # Path to directory where object files should be stored during a build.
+ # Set OBJ_ROOT to "." if you do not want to use a separate place for
+ # object files.
+ OBJ_ROOT := .
+ SUBDIRS = VMCore Bytecode AsmParser Analysis Transforms CodeGen Target \
+ ExecutionEngine Debugger
+
+ all: all-recursive
+
+ .SUFFIXES:
+ $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/Makefile_config $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign lib/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign lib/Makefile
+ .PRECIOUS: Makefile
+ Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+ $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+ $(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+ $(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+ mostlyclean-libtool:
+ -rm -f *.lo
+
+ clean-libtool:
+ -rm -rf .libs _libs
+
+ distclean-libtool:
+ -rm -f libtool
+ uninstall-info-am:
+
+ # This directory's subdirectories are mostly independent; you can cd
+ # into them and run `make' without going through this Makefile.
+ # To change the values of `make' variables: instead of editing Makefiles,
+ # (1) if the variable is set in `config.status', edit `config.status'
+ # (which will cause the Makefiles to be regenerated when you run `make');
+ # (2) otherwise, pass the desired values on the `make' command line.
+ $(RECURSIVE_TARGETS):
+ @set fnord $$MAKEFLAGS; amf=$$2; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+ mostlyclean-recursive clean-recursive distclean-recursive \
+ maintainer-clean-recursive:
+ @set fnord $$MAKEFLAGS; amf=$$2; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+ done && test -z "$$fail"
+ tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+ done
+ ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+ done
+
+ ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+ tags: TAGS
+
+ TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ ctags: CTAGS
+ CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+ GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+ distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+ check-DEJAGNU: site.exp
+ srcdir=`$(am__cd) $(srcdir) && pwd`; export srcdir; \
+ EXPECT=$(EXPECT); export EXPECT; \
+ runtest=$(RUNTEST); \
+ if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \
+ l='$(DEJATOOL)'; for tool in $$l; do \
+ $$runtest $(AM_RUNTESTFLAGS) $(RUNTESTDEFAULTFLAGS) $(RUNTESTFLAGS); \
+ done; \
+ else echo "WARNING: could not find \`runtest'" 1>&2; :;\
+ fi
+ site.exp: Makefile
+ @echo 'Making a new site.exp file...'
+ @echo '## these variables are automatically generated by make ##' >site.tmp
+ @echo '# Do not edit here. If you wish to override these values' >>site.tmp
+ @echo '# edit the last section' >>site.tmp
+ @echo 'set srcdir $(srcdir)' >>site.tmp
+ @echo "set objdir `pwd`" >>site.tmp
+ @echo 'set build_alias "$(build_alias)"' >>site.tmp
+ @echo 'set build_triplet $(build_triplet)' >>site.tmp
+ @echo 'set host_alias "$(host_alias)"' >>site.tmp
+ @echo 'set host_triplet $(host_triplet)' >>site.tmp
+ @echo 'set target_alias "$(target_alias)"' >>site.tmp
+ @echo 'set target_triplet $(target_triplet)' >>site.tmp
+ @echo '## All variables above are generated by configure. Do Not Edit ##' >>site.tmp
+ @test ! -f site.exp || \
+ sed '1,/^## All variables above are.*##/ d' site.exp >> site.tmp
+ @-rm -f site.bak
+ @test ! -f site.exp || mv site.exp site.bak
+ @mv site.tmp site.exp
+
+ distclean-DEJAGNU:
+ -rm -f site.exp site.bak
+ -l='$(DEJATOOL)'; for tool in $$l; do \
+ rm -f $$tool.sum $$tool.log; \
+ done
+
+ distdir: $(DISTFILES)
+ $(mkdir_p) $(distdir)/..
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+ check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-DEJAGNU
+ check: check-recursive
+ all-am: Makefile
+ installdirs: installdirs-recursive
+ installdirs-am:
+ install: install-recursive
+ install-exec: install-exec-recursive
+ install-data: install-data-recursive
+ uninstall: uninstall-recursive
+
+ install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+ installcheck: installcheck-recursive
+ install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+ mostlyclean-generic:
+
+ clean-generic:
+
+ distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+ maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+ clean: clean-recursive
+
+ clean-am: clean-generic clean-libtool mostlyclean-am
+
+ distclean: distclean-recursive
+ -rm -f Makefile
+ distclean-am: clean-am distclean-DEJAGNU distclean-generic \
+ distclean-libtool distclean-tags
+
+ dvi: dvi-recursive
+
+ dvi-am:
+
+ html: html-recursive
+
+ info: info-recursive
+
+ info-am:
+
+ install-data-am:
+
+ install-exec-am:
+
+ install-info: install-info-recursive
+
+ install-man:
+
+ installcheck-am:
+
+ maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+ maintainer-clean-am: distclean-am maintainer-clean-generic
+
+ mostlyclean: mostlyclean-recursive
+
+ mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+ pdf: pdf-recursive
+
+ pdf-am:
+
+ ps: ps-recursive
+
+ ps-am:
+
+ uninstall-am: uninstall-info-am
+
+ uninstall-info: uninstall-info-recursive
+
+ .PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check \
+ check-DEJAGNU check-am clean clean-generic clean-libtool \
+ clean-recursive ctags ctags-recursive distclean \
+ distclean-DEJAGNU distclean-generic distclean-libtool \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-libtool \
+ mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \
+ uninstall uninstall-am uninstall-info-am
+
+
+ # These are options that can either be enabled here, or can be enabled on the
+ # make command line (ie, make ENABLE_PROFILING=1):
+
+ # When ENABLE_OPTIMIZED is enabled, Release builds of all of the LLVM code are
+ # turned on, and Debug builds are turned off.
+ #ENABLE_OPTIMIZED = 1
+
+ # When ENABLE_PROFILING is enabled, the llvm source base is built with profile
+ # information to allow gprof to be used to get execution frequencies.
+ #ENABLE_PROFILING = 1
+
+ # This option tells the Makefiles to produce verbose output.
+ # It essentially prints the commands that make is executing
+ #VERBOSE = 1
+
+ # Include the rules.
+ # WARNING NOTE WARNING NOTE WARNING NOTE WARNING NOTE
+ # The inclusion of Makefile_rules MUST be done such that there is a space
+ # before "include". This prevents automake from processing the file and
+ # simply passes the inclusion on to GNU Make. The rules in Makefile_rules
+ # depend on this. DO NOT REMOVE THE SPACE BEFORE "include"
+ include $(top_srcdir)/Makefile_rules
+ # Tell versions [3.59,3.63) of GNU make to not export all variables.
+ # Otherwise a system limit (for SysV at least) may be exceeded.
+ .NOEXPORT:
More information about the llvm-commits
mailing list