[llvm-commits] CVS: llvm/test/Programs/MultiSource/Applications/lambda-0.1.3/config/depcomp install-sh missing mkinstalldirs
John Criswell
criswell at cs.uiuc.edu
Mon Dec 29 11:38:05 PST 2003
Changes in directory llvm/test/Programs/MultiSource/Applications/lambda-0.1.3/config:
depcomp added (r1.1)
install-sh added (r1.1)
missing added (r1.1)
mkinstalldirs added (r1.1)
---
Log message:
Adding the C++ program lambda to the test suite. This is a "real" C++
application that currently appears to work on both Linux and Solaris.
---
Diffs of the changes: (+1109 -0)
Index: llvm/test/Programs/MultiSource/Applications/lambda-0.1.3/config/depcomp
diff -c /dev/null llvm/test/Programs/MultiSource/Applications/lambda-0.1.3/config/depcomp:1.1
*** /dev/null Mon Dec 29 11:37:48 2003
--- llvm/test/Programs/MultiSource/Applications/lambda-0.1.3/config/depcomp Mon Dec 29 11:37:37 2003
***************
*** 0 ****
--- 1,423 ----
+ #! /bin/sh
+
+ # depcomp - compile a program generating dependencies as side-effects
+ # Copyright 1999, 2000 Free Software Foundation, Inc.
+
+ # This program is free software; you can redistribute it and/or modify
+ # it under the terms of the GNU General Public License as published by
+ # the Free Software Foundation; either version 2, or (at your option)
+ # any later version.
+
+ # This program is distributed in the hope that it will be useful,
+ # but WITHOUT ANY WARRANTY; without even the implied warranty of
+ # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ # GNU General Public License for more details.
+
+ # You should have received a copy of the GNU General Public License
+ # along with this program; if not, write to the Free Software
+ # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+ # 02111-1307, USA.
+
+ # As a special exception to the GNU General Public License, if you
+ # distribute this file as part of a program that contains a
+ # configuration script generated by Autoconf, you may include it under
+ # the same distribution terms that you use for the rest of that program.
+
+ # Originally written by Alexandre Oliva <oliva at dcc.unicamp.br>.
+
+ if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+ echo "depcomp: Variables source, object and depmode must be set" 1>&2
+ exit 1
+ fi
+ # `libtool' can also be set to `yes' or `no'.
+
+ if test -z "$depfile"; then
+ base=`echo "$object" | sed -e 's,^.*/,,' -e 's,\.\([^.]*\)$,.P\1,'`
+ dir=`echo "$object" | sed 's,/.*$,/,'`
+ if test "$dir" = "$object"; then
+ dir=
+ fi
+ # FIXME: should be _deps on DOS.
+ depfile="$dir.deps/$base"
+ fi
+
+ tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+ rm -f "$tmpdepfile"
+
+ # Some modes work just like other modes, but use different flags. We
+ # parameterize here, but still list the modes in the big case below,
+ # to make depend.m4 easier to write. Note that we *cannot* use a case
+ # here, because this file can only contain one case statement.
+ if test "$depmode" = hp; then
+ # HP compiler uses -M and no extra arg.
+ gccflag=-M
+ depmode=gcc
+ fi
+
+ if test "$depmode" = dashXmstdout; then
+ # This is just like dashmstdout with a different argument.
+ dashmflag=-xM
+ depmode=dashmstdout
+ fi
+
+ case "$depmode" in
+ gcc3)
+ ## gcc 3 implements dependency tracking that does exactly what
+ ## we want. Yay! Note: for some reason libtool 1.4 doesn't like
+ ## it if -MD -MP comes after the -MF stuff. Hmm.
+ "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ mv "$tmpdepfile" "$depfile"
+ ;;
+
+ gcc)
+ ## There are various ways to get dependency output from gcc. Here's
+ ## why we pick this rather obscure method:
+ ## - Don't want to use -MD because we'd like the dependencies to end
+ ## up in a subdir. Having to rename by hand is ugly.
+ ## (We might end up doing this anyway to support other compilers.)
+ ## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+ ## -MM, not -M (despite what the docs say).
+ ## - Using -M directly means running the compiler twice (even worse
+ ## than renaming).
+ if test -z "$gccflag"; then
+ gccflag=-MD,
+ fi
+ "$@" -Wp,"$gccflag$tmpdepfile"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
+ ## The second -e expression handles DOS-style file names with drive letters.
+ sed -e 's/^[^:]*: / /' \
+ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+ ## This next piece of magic avoids the `deleted header file' problem.
+ ## The problem is that when a header file which appears in a .P file
+ ## is deleted, the dependency causes make to die (because there is
+ ## typically no way to rebuild the header). We avoid this by adding
+ ## dummy dependencies for each header file. Too bad gcc doesn't do
+ ## this for us directly.
+ tr ' ' '
+ ' < "$tmpdepfile" |
+ ## Some versions of gcc put a space before the `:'. On the theory
+ ## that the space means something, we add a space to the output as
+ ## well.
+ ## Some versions of the HPUX 10.20 sed can't process this invocation
+ ## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+ hp)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
+ sgi)
+ if test "$libtool" = yes; then
+ "$@" "-Wp,-MDupdate,$tmpdepfile"
+ else
+ "$@" -MDupdate "$tmpdepfile"
+ fi
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+
+ if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
+ echo "$object : \\" > "$depfile"
+
+ # Clip off the initial element (the dependent). Don't try to be
+ # clever and replace this with sed code, as IRIX sed won't handle
+ # lines with more than a fixed number of characters (4096 in
+ # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
+ # the IRIX cc adds comments like `#:fec' to the end of the
+ # dependency line.
+ tr ' ' '
+ ' < "$tmpdepfile" \
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
+ tr '
+ ' ' ' >> $depfile
+ echo >> $depfile
+
+ # The second pass generates a dummy entry for each header file.
+ tr ' ' '
+ ' < "$tmpdepfile" \
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+ >> $depfile
+ else
+ # The sourcefile does not contain any dependencies, so just
+ # store a dummy comment line, to avoid errors with the Makefile
+ # "include basename.Plo" scheme.
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+ aix)
+ # The C for AIX Compiler uses -M and outputs the dependencies
+ # in a .u file. This file always lives in the current directory.
+ # Also, the AIX compiler puts `$object:' at the start of each line;
+ # $object doesn't have directory information.
+ stripped=`echo "$object" | sed -e 's,^.*/,,' -e 's/\(.*\)\..*$/\1/'`
+ tmpdepfile="$stripped.u"
+ outname="$stripped.o"
+ if test "$libtool" = yes; then
+ "$@" -Wc,-M
+ else
+ "$@" -M
+ fi
+
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+
+ if test -f "$tmpdepfile"; then
+ # Each line is of the form `foo.o: dependent.h'.
+ # Do two passes, one to just change these to
+ # `$object: dependent.h' and one to simply `dependent.h:'.
+ sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
+ sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
+ else
+ # The sourcefile does not contain any dependencies, so just
+ # store a dummy comment line, to avoid errors with the Makefile
+ # "include basename.Plo" scheme.
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+ tru64)
+ # The Tru64 compiler uses -MD to generate dependencies as a side
+ # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
+ # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+ # dependencies in `foo.d' instead, so we check for that too.
+ # Subdirectories are respected.
+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+ test "x$dir" = "x$object" && dir=
+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+
+ if test "$libtool" = yes; then
+ tmpdepfile1="$dir.libs/$base.lo.d"
+ tmpdepfile2="$dir.libs/$base.d"
+ "$@" -Wc,-MD
+ else
+ tmpdepfile1="$dir$base.o.d"
+ tmpdepfile2="$dir$base.d"
+ "$@" -MD
+ fi
+
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile1" "$tmpdepfile2"
+ exit $stat
+ fi
+
+ if test -f "$tmpdepfile1"; then
+ tmpdepfile="$tmpdepfile1"
+ else
+ tmpdepfile="$tmpdepfile2"
+ fi
+ if test -f "$tmpdepfile"; then
+ sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+ # That's a space and a tab in the [].
+ sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+ else
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+ #nosideeffect)
+ # This comment above is used by automake to tell side-effect
+ # dependency tracking mechanisms from slower ones.
+
+ dashmstdout)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the proprocessed file to stdout, regardless of -o.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test $1 != '--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ # Remove `-o $object'. We will use -o /dev/null later,
+ # however we can't do the remplacement now because
+ # `-o $object' might simply not be used
+ IFS=" "
+ for arg
+ do
+ case $arg in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift # fnord
+ shift # $arg
+ ;;
+ esac
+ done
+
+ test -z "$dashmflag" && dashmflag=-M
+ "$@" -o /dev/null $dashmflag | sed 's:^[^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
+ rm -f "$depfile"
+ cat < "$tmpdepfile" > "$depfile"
+ tr ' ' '
+ ' < "$tmpdepfile" | \
+ ## Some versions of the HPUX 10.20 sed can't process this invocation
+ ## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+ dashXmstdout)
+ # This case only exists to satisfy depend.m4. It is never actually
+ # run, as this mode is specially recognized in the preamble.
+ exit 1
+ ;;
+
+ makedepend)
+ "$@" || exit $?
+ # X makedepend
+ shift
+ cleared=no
+ for arg in "$@"; do
+ case $cleared in
+ no)
+ set ""; shift
+ cleared=yes ;;
+ esac
+ case "$arg" in
+ -D*|-I*)
+ set fnord "$@" "$arg"; shift ;;
+ -*)
+ ;;
+ *)
+ set fnord "$@" "$arg"; shift ;;
+ esac
+ done
+ obj_suffix="`echo $object | sed 's/^.*\././'`"
+ touch "$tmpdepfile"
+ ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
+ rm -f "$depfile"
+ cat < "$tmpdepfile" > "$depfile"
+ sed '1,2d' "$tmpdepfile" | tr ' ' '
+ ' | \
+ ## Some versions of the HPUX 10.20 sed can't process this invocation
+ ## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile" "$tmpdepfile".bak
+ ;;
+
+ cpp)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the proprocessed file to stdout.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test $1 != '--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ # Remove `-o $object'.
+ IFS=" "
+ for arg
+ do
+ case $arg in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift # fnord
+ shift # $arg
+ ;;
+ esac
+ done
+
+ "$@" -E |
+ sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
+ sed '$ s: \\$::' > "$tmpdepfile"
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ cat < "$tmpdepfile" >> "$depfile"
+ sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+ msvisualcpp)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the proprocessed file to stdout, regardless of -o,
+ # because we must use -o when running libtool.
+ "$@" || exit $?
+ IFS=" "
+ for arg
+ do
+ case "$arg" in
+ "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+ set fnord "$@"
+ shift
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift
+ shift
+ ;;
+ esac
+ done
+ "$@" -E |
+ sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
+ echo " " >> "$depfile"
+ . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+ none)
+ exec "$@"
+ ;;
+
+ *)
+ echo "Unknown depmode $depmode" 1>&2
+ exit 1
+ ;;
+ esac
+
+ exit 0
Index: llvm/test/Programs/MultiSource/Applications/lambda-0.1.3/config/install-sh
diff -c /dev/null llvm/test/Programs/MultiSource/Applications/lambda-0.1.3/config/install-sh:1.1
*** /dev/null Mon Dec 29 11:37:48 2003
--- llvm/test/Programs/MultiSource/Applications/lambda-0.1.3/config/install-sh Mon Dec 29 11:37:37 2003
***************
*** 0 ****
--- 1,251 ----
+ #!/bin/sh
+ #
+ # install - install a program, script, or datafile
+ # This comes from X11R5 (mit/util/scripts/install.sh).
+ #
+ # Copyright 1991 by the Massachusetts Institute of Technology
+ #
+ # Permission to use, copy, modify, distribute, and sell this software and its
+ # documentation for any purpose is hereby granted without fee, provided that
+ # the above copyright notice appear in all copies and that both that
+ # copyright notice and this permission notice appear in supporting
+ # documentation, and that the name of M.I.T. not be used in advertising or
+ # publicity pertaining to distribution of the software without specific,
+ # written prior permission. M.I.T. makes no representations about the
+ # suitability of this software for any purpose. It is provided "as is"
+ # without express or implied warranty.
+ #
+ # Calling this script install-sh is preferred over install.sh, to prevent
+ # `make' implicit rules from creating a file called install from it
+ # when there is no Makefile.
+ #
+ # This script is compatible with the BSD install script, but was written
+ # from scratch. It can only install one file at a time, a restriction
+ # shared with many OS's install programs.
+
+
+ # set DOITPROG to echo to test this script
+
+ # Don't use :- since 4.3BSD and earlier shells don't like it.
+ doit="${DOITPROG-}"
+
+
+ # put in absolute paths if you don't have them in your path; or use env. vars.
+
+ mvprog="${MVPROG-mv}"
+ cpprog="${CPPROG-cp}"
+ chmodprog="${CHMODPROG-chmod}"
+ chownprog="${CHOWNPROG-chown}"
+ chgrpprog="${CHGRPPROG-chgrp}"
+ stripprog="${STRIPPROG-strip}"
+ rmprog="${RMPROG-rm}"
+ mkdirprog="${MKDIRPROG-mkdir}"
+
+ transformbasename=""
+ transform_arg=""
+ instcmd="$mvprog"
+ chmodcmd="$chmodprog 0755"
+ chowncmd=""
+ chgrpcmd=""
+ stripcmd=""
+ rmcmd="$rmprog -f"
+ mvcmd="$mvprog"
+ src=""
+ dst=""
+ dir_arg=""
+
+ while [ x"$1" != x ]; do
+ case $1 in
+ -c) instcmd="$cpprog"
+ shift
+ continue;;
+
+ -d) dir_arg=true
+ shift
+ continue;;
+
+ -m) chmodcmd="$chmodprog $2"
+ shift
+ shift
+ continue;;
+
+ -o) chowncmd="$chownprog $2"
+ shift
+ shift
+ continue;;
+
+ -g) chgrpcmd="$chgrpprog $2"
+ shift
+ shift
+ continue;;
+
+ -s) stripcmd="$stripprog"
+ shift
+ continue;;
+
+ -t=*) transformarg=`echo $1 | sed 's/-t=//'`
+ shift
+ continue;;
+
+ -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
+ shift
+ continue;;
+
+ *) if [ x"$src" = x ]
+ then
+ src=$1
+ else
+ # this colon is to work around a 386BSD /bin/sh bug
+ :
+ dst=$1
+ fi
+ shift
+ continue;;
+ esac
+ done
+
+ if [ x"$src" = x ]
+ then
+ echo "install: no input file specified"
+ exit 1
+ else
+ :
+ fi
+
+ if [ x"$dir_arg" != x ]; then
+ dst=$src
+ src=""
+
+ if [ -d $dst ]; then
+ instcmd=:
+ chmodcmd=""
+ else
+ instcmd=$mkdirprog
+ fi
+ else
+
+ # Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+ # might cause directories to be created, which would be especially bad
+ # if $src (and thus $dsttmp) contains '*'.
+
+ if [ -f "$src" ] || [ -d "$src" ]
+ then
+ :
+ else
+ echo "install: $src does not exist"
+ exit 1
+ fi
+
+ if [ x"$dst" = x ]
+ then
+ echo "install: no destination specified"
+ exit 1
+ else
+ :
+ fi
+
+ # If destination is a directory, append the input filename; if your system
+ # does not like double slashes in filenames, you may need to add some logic
+
+ if [ -d $dst ]
+ then
+ dst="$dst"/`basename $src`
+ else
+ :
+ fi
+ fi
+
+ ## this sed command emulates the dirname command
+ dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+
+ # Make sure that the destination directory exists.
+ # this part is taken from Noah Friedman's mkinstalldirs script
+
+ # Skip lots of stat calls in the usual case.
+ if [ ! -d "$dstdir" ]; then
+ defaultIFS='
+ '
+ IFS="${IFS-${defaultIFS}}"
+
+ oIFS="${IFS}"
+ # Some sh's can't handle IFS=/ for some reason.
+ IFS='%'
+ set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
+ IFS="${oIFS}"
+
+ pathcomp=''
+
+ while [ $# -ne 0 ] ; do
+ pathcomp="${pathcomp}${1}"
+ shift
+
+ if [ ! -d "${pathcomp}" ] ;
+ then
+ $mkdirprog "${pathcomp}"
+ else
+ :
+ fi
+
+ pathcomp="${pathcomp}/"
+ done
+ fi
+
+ if [ x"$dir_arg" != x ]
+ then
+ $doit $instcmd $dst &&
+
+ if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else : ; fi &&
+ if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else : ; fi &&
+ if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else : ; fi &&
+ if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else : ; fi
+ else
+
+ # If we're going to rename the final executable, determine the name now.
+
+ if [ x"$transformarg" = x ]
+ then
+ dstfile=`basename $dst`
+ else
+ dstfile=`basename $dst $transformbasename |
+ sed $transformarg`$transformbasename
+ fi
+
+ # don't allow the sed command to completely eliminate the filename
+
+ if [ x"$dstfile" = x ]
+ then
+ dstfile=`basename $dst`
+ else
+ :
+ fi
+
+ # Make a temp file name in the proper directory.
+
+ dsttmp=$dstdir/#inst.$$#
+
+ # Move or copy the file name to the temp name
+
+ $doit $instcmd $src $dsttmp &&
+
+ trap "rm -f ${dsttmp}" 0 &&
+
+ # and set any options; do chmod last to preserve setuid bits
+
+ # If any of these fail, we abort the whole thing. If we want to
+ # ignore errors from any of these, just make sure not to ignore
+ # errors from the above "$doit $instcmd $src $dsttmp" command.
+
+ if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else :;fi &&
+ if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else :;fi &&
+ if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else :;fi &&
+ if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else :;fi &&
+
+ # Now rename the file to the real destination.
+
+ $doit $rmcmd -f $dstdir/$dstfile &&
+ $doit $mvcmd $dsttmp $dstdir/$dstfile
+
+ fi &&
+
+
+ exit 0
Index: llvm/test/Programs/MultiSource/Applications/lambda-0.1.3/config/missing
diff -c /dev/null llvm/test/Programs/MultiSource/Applications/lambda-0.1.3/config/missing:1.1
*** /dev/null Mon Dec 29 11:37:48 2003
--- llvm/test/Programs/MultiSource/Applications/lambda-0.1.3/config/missing Mon Dec 29 11:37:37 2003
***************
*** 0 ****
--- 1,336 ----
+ #! /bin/sh
+ # Common stub for a few missing GNU programs while installing.
+ # Copyright (C) 1996, 1997, 1999, 2000, 2002 Free Software Foundation, Inc.
+ # Originally by Fran,cois Pinard <pinard at iro.umontreal.ca>, 1996.
+
+ # This program is free software; you can redistribute it and/or modify
+ # it under the terms of the GNU General Public License as published by
+ # the Free Software Foundation; either version 2, or (at your option)
+ # any later version.
+
+ # This program is distributed in the hope that it will be useful,
+ # but WITHOUT ANY WARRANTY; without even the implied warranty of
+ # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ # GNU General Public License for more details.
+
+ # You should have received a copy of the GNU General Public License
+ # along with this program; if not, write to the Free Software
+ # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+ # 02111-1307, USA.
+
+ # As a special exception to the GNU General Public License, if you
+ # distribute this file as part of a program that contains a
+ # configuration script generated by Autoconf, you may include it under
+ # the same distribution terms that you use for the rest of that program.
+
+ if test $# -eq 0; then
+ echo 1>&2 "Try \`$0 --help' for more information"
+ exit 1
+ fi
+
+ run=:
+
+ # In the cases where this matters, `missing' is being run in the
+ # srcdir already.
+ if test -f configure.ac; then
+ configure_ac=configure.ac
+ else
+ configure_ac=configure.in
+ fi
+
+ case "$1" in
+ --run)
+ # Try to run requested program, and just exit if it succeeds.
+ run=
+ shift
+ "$@" && exit 0
+ ;;
+ esac
+
+ # If it does not exist, or fails to run (possibly an outdated version),
+ # try to emulate it.
+ case "$1" in
+
+ -h|--h|--he|--hel|--help)
+ echo "\
+ $0 [OPTION]... PROGRAM [ARGUMENT]...
+
+ Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+ error status if there is no known handling for PROGRAM.
+
+ Options:
+ -h, --help display this help and exit
+ -v, --version output version information and exit
+ --run try to run the given command, and emulate it if it fails
+
+ Supported PROGRAM values:
+ aclocal touch file \`aclocal.m4'
+ autoconf touch file \`configure'
+ autoheader touch file \`config.h.in'
+ automake touch all \`Makefile.in' files
+ bison create \`y.tab.[ch]', if possible, from existing .[ch]
+ flex create \`lex.yy.c', if possible, from existing .c
+ help2man touch the output file
+ lex create \`lex.yy.c', if possible, from existing .c
+ makeinfo touch the output file
+ tar try tar, gnutar, gtar, then tar without non-portable flags
+ yacc create \`y.tab.[ch]', if possible, from existing .[ch]"
+ ;;
+
+ -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+ echo "missing 0.4 - GNU automake"
+ ;;
+
+ -*)
+ echo 1>&2 "$0: Unknown \`$1' option"
+ echo 1>&2 "Try \`$0 --help' for more information"
+ exit 1
+ ;;
+
+ aclocal*)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
+ fi
+
+ echo 1>&2 "\
+ WARNING: \`$1' is missing on your system. You should only need it if
+ you modified \`acinclude.m4' or \`${configure_ac}'. You might want
+ to install the \`Automake' and \`Perl' packages. Grab them from
+ any GNU archive site."
+ touch aclocal.m4
+ ;;
+
+ autoconf)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
+ fi
+
+ echo 1>&2 "\
+ WARNING: \`$1' is missing on your system. You should only need it if
+ you modified \`${configure_ac}'. You might want to install the
+ \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
+ archive site."
+ touch configure
+ ;;
+
+ autoheader)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
+ fi
+
+ echo 1>&2 "\
+ WARNING: \`$1' is missing on your system. You should only need it if
+ you modified \`acconfig.h' or \`${configure_ac}'. You might want
+ to install the \`Autoconf' and \`GNU m4' packages. Grab them
+ from any GNU archive site."
+ files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
+ test -z "$files" && files="config.h"
+ touch_files=
+ for f in $files; do
+ case "$f" in
+ *:*) touch_files="$touch_files "`echo "$f" |
+ sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+ *) touch_files="$touch_files $f.in";;
+ esac
+ done
+ touch $touch_files
+ ;;
+
+ automake*)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
+ fi
+
+ echo 1>&2 "\
+ WARNING: \`$1' is missing on your system. You should only need it if
+ you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
+ You might want to install the \`Automake' and \`Perl' packages.
+ Grab them from any GNU archive site."
+ find . -type f -name Makefile.am -print |
+ sed 's/\.am$/.in/' |
+ while read f; do touch "$f"; done
+ ;;
+
+ autom4te)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
+ fi
+
+ echo 1>&2 "\
+ WARNING: \`$1' is needed, and you do not seem to have it handy on your
+ system. You might have modified some files without having the
+ proper tools for further handling them.
+ You can get \`$1Help2man' as part of \`Autoconf' from any GNU
+ archive site."
+
+ file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
+ test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
+ if test -f "$file"; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo "#! /bin/sh"
+ echo "# Created by GNU Automake missing as a replacement of"
+ echo "# $ $@"
+ echo "exit 0"
+ chmod +x $file
+ exit 1
+ fi
+ ;;
+
+ bison|yacc)
+ echo 1>&2 "\
+ WARNING: \`$1' is missing on your system. You should only need it if
+ you modified a \`.y' file. You may need the \`Bison' package
+ in order for those modifications to take effect. You can get
+ \`Bison' from any GNU archive site."
+ rm -f y.tab.c y.tab.h
+ if [ $# -ne 1 ]; then
+ eval LASTARG="\${$#}"
+ case "$LASTARG" in
+ *.y)
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+ if [ -f "$SRCFILE" ]; then
+ cp "$SRCFILE" y.tab.c
+ fi
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+ if [ -f "$SRCFILE" ]; then
+ cp "$SRCFILE" y.tab.h
+ fi
+ ;;
+ esac
+ fi
+ if [ ! -f y.tab.h ]; then
+ echo >y.tab.h
+ fi
+ if [ ! -f y.tab.c ]; then
+ echo 'main() { return 0; }' >y.tab.c
+ fi
+ ;;
+
+ lex|flex)
+ echo 1>&2 "\
+ WARNING: \`$1' is missing on your system. You should only need it if
+ you modified a \`.l' file. You may need the \`Flex' package
+ in order for those modifications to take effect. You can get
+ \`Flex' from any GNU archive site."
+ rm -f lex.yy.c
+ if [ $# -ne 1 ]; then
+ eval LASTARG="\${$#}"
+ case "$LASTARG" in
+ *.l)
+ SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+ if [ -f "$SRCFILE" ]; then
+ cp "$SRCFILE" lex.yy.c
+ fi
+ ;;
+ esac
+ fi
+ if [ ! -f lex.yy.c ]; then
+ echo 'main() { return 0; }' >lex.yy.c
+ fi
+ ;;
+
+ help2man)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
+ fi
+
+ echo 1>&2 "\
+ WARNING: \`$1' is missing on your system. You should only need it if
+ you modified a dependency of a manual page. You may need the
+ \`Help2man' package in order for those modifications to take
+ effect. You can get \`Help2man' from any GNU archive site."
+
+ file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+ if test -z "$file"; then
+ file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
+ fi
+ if [ -f "$file" ]; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo ".ab help2man is required to generate this page"
+ exit 1
+ fi
+ ;;
+
+ makeinfo)
+ if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
+ # We have makeinfo, but it failed.
+ exit 1
+ fi
+
+ echo 1>&2 "\
+ WARNING: \`$1' is missing on your system. You should only need it if
+ you modified a \`.texi' or \`.texinfo' file, or any other file
+ indirectly affecting the aspect of the manual. The spurious
+ call might also be the consequence of using a buggy \`make' (AIX,
+ DU, IRIX). You might want to install the \`Texinfo' package or
+ the \`GNU make' package. Grab either from any GNU archive site."
+ file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+ if test -z "$file"; then
+ file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+ file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
+ fi
+ touch $file
+ ;;
+
+ tar)
+ shift
+ if test -n "$run"; then
+ echo 1>&2 "ERROR: \`tar' requires --run"
+ exit 1
+ fi
+
+ # We have already tried tar in the generic part.
+ # Look for gnutar/gtar before invocation to avoid ugly error
+ # messages.
+ if (gnutar --version > /dev/null 2>&1); then
+ gnutar "$@" && exit 0
+ fi
+ if (gtar --version > /dev/null 2>&1); then
+ gtar "$@" && exit 0
+ fi
+ firstarg="$1"
+ if shift; then
+ case "$firstarg" in
+ *o*)
+ firstarg=`echo "$firstarg" | sed s/o//`
+ tar "$firstarg" "$@" && exit 0
+ ;;
+ esac
+ case "$firstarg" in
+ *h*)
+ firstarg=`echo "$firstarg" | sed s/h//`
+ tar "$firstarg" "$@" && exit 0
+ ;;
+ esac
+ fi
+
+ echo 1>&2 "\
+ WARNING: I can't seem to be able to run \`tar' with the given arguments.
+ You may want to install GNU tar or Free paxutils, or check the
+ command line arguments."
+ exit 1
+ ;;
+
+ *)
+ echo 1>&2 "\
+ WARNING: \`$1' is needed, and you do not seem to have it handy on your
+ system. You might have modified some files without having the
+ proper tools for further handling them. Check the \`README' file,
+ it often tells you about the needed prerequirements for installing
+ this package. You may also peek at any GNU archive site, in case
+ some other package would contain this missing \`$1' program."
+ exit 1
+ ;;
+ esac
+
+ exit 0
Index: llvm/test/Programs/MultiSource/Applications/lambda-0.1.3/config/mkinstalldirs
diff -c /dev/null llvm/test/Programs/MultiSource/Applications/lambda-0.1.3/config/mkinstalldirs:1.1
*** /dev/null Mon Dec 29 11:37:48 2003
--- llvm/test/Programs/MultiSource/Applications/lambda-0.1.3/config/mkinstalldirs Mon Dec 29 11:37:38 2003
***************
*** 0 ****
--- 1,99 ----
+ #! /bin/sh
+ # mkinstalldirs --- make directory hierarchy
+ # Author: Noah Friedman <friedman at prep.ai.mit.edu>
+ # Created: 1993-05-16
+ # Public domain
+
+ errstatus=0
+ dirmode=""
+
+ usage="\
+ Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..."
+
+ # process command line arguments
+ while test $# -gt 0 ; do
+ case "${1}" in
+ -h | --help | --h* ) # -h for help
+ echo "${usage}" 1>&2; exit 0 ;;
+ -m ) # -m PERM arg
+ shift
+ test $# -eq 0 && { echo "${usage}" 1>&2; exit 1; }
+ dirmode="${1}"
+ shift ;;
+ -- ) shift; break ;; # stop option processing
+ -* ) echo "${usage}" 1>&2; exit 1 ;; # unknown option
+ * ) break ;; # first non-opt arg
+ esac
+ done
+
+ for file
+ do
+ if test -d "$file"; then
+ shift
+ else
+ break
+ fi
+ done
+
+ case $# in
+ 0) exit 0 ;;
+ esac
+
+ case $dirmode in
+ '')
+ if mkdir -p -- . 2>/dev/null; then
+ echo "mkdir -p -- $*"
+ exec mkdir -p -- "$@"
+ fi ;;
+ *)
+ if mkdir -m "$dirmode" -p -- . 2>/dev/null; then
+ echo "mkdir -m $dirmode -p -- $*"
+ exec mkdir -m "$dirmode" -p -- "$@"
+ fi ;;
+ esac
+
+ for file
+ do
+ set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
+ shift
+
+ pathcomp=
+ for d
+ do
+ pathcomp="$pathcomp$d"
+ case "$pathcomp" in
+ -* ) pathcomp=./$pathcomp ;;
+ esac
+
+ if test ! -d "$pathcomp"; then
+ echo "mkdir $pathcomp"
+
+ mkdir "$pathcomp" || lasterr=$?
+
+ if test ! -d "$pathcomp"; then
+ errstatus=$lasterr
+ else
+ if test ! -z "$dirmode"; then
+ echo "chmod $dirmode $pathcomp"
+
+ lasterr=""
+ chmod "$dirmode" "$pathcomp" || lasterr=$?
+
+ if test ! -z "$lasterr"; then
+ errstatus=$lasterr
+ fi
+ fi
+ fi
+ fi
+
+ pathcomp="$pathcomp/"
+ done
+ done
+
+ exit $errstatus
+
+ # Local Variables:
+ # mode: shell-script
+ # sh-indentation: 3
+ # End:
+ # mkinstalldirs ends here
More information about the llvm-commits
mailing list