[llvm-branch-commits] [llvm-branch] r333577 - Merging r328798:
Tom Stellard via llvm-branch-commits
llvm-branch-commits at lists.llvm.org
Wed May 30 11:50:22 PDT 2018
Author: tstellar
Date: Wed May 30 11:50:22 2018
New Revision: 333577
URL: http://llvm.org/viewvc/llvm-project?rev=333577&view=rev
Log:
Merging r328798:
------------------------------------------------------------------------
r328798 | haicheng | 2018-03-29 09:01:26 -0700 (Thu, 29 Mar 2018) | 37 lines
[JumpThreading] Don't select an edge that we know we can't thread
In r312664 (D36404), JumpThreading stopped threading edges into
loop headers. Unfortunately, I observed a significant performance
regression as a result of this change. Upon further investigation,
the problematic pattern looked something like this (after
many high level optimizations):
while (true) {
bool cond = ...;
if (!cond) {
<body>
}
if (cond)
break;
}
Now, naturally we want jump threading to essentially eliminate the
second if check and hook up the edges appropriately. However, the
above mentioned change, prevented it from doing this because it would
have to thread an edge into the loop header.
Upon further investigation, what is happening is that since both branches
are threadable, JumpThreading picks one of them at arbitrarily. In my
case, because of the way that the IR ended up, it tended to pick
the one to the loop header, bailing out immediately after. However,
if it had picked the one to the exit block, everything would have
worked out fine (because the only remaining branch would then be folded,
not thraded which is acceptable).
Thus, to fix this problem, we can simply eliminate loop headers from
consideration as possible threading targets earlier, to make sure that
if there are multiple eligible branches, we can still thread one of
the ones that don't target a loop header.
Patch by Keno Fischer!
Differential Revision: https://reviews.llvm.org/D42260
------------------------------------------------------------------------
Added:
llvm/branches/release_60/test/Transforms/JumpThreading/header-succ.ll
Modified:
llvm/branches/release_60/lib/Transforms/Scalar/JumpThreading.cpp
Modified: llvm/branches/release_60/lib/Transforms/Scalar/JumpThreading.cpp
URL: http://llvm.org/viewvc/llvm-project/llvm/branches/release_60/lib/Transforms/Scalar/JumpThreading.cpp?rev=333577&r1=333576&r2=333577&view=diff
==============================================================================
--- llvm/branches/release_60/lib/Transforms/Scalar/JumpThreading.cpp (original)
+++ llvm/branches/release_60/lib/Transforms/Scalar/JumpThreading.cpp Wed May 30 11:50:22 2018
@@ -1454,6 +1454,9 @@ FindMostPopularDest(BasicBlock *BB,
if (PredToDest.second)
DestPopularity[PredToDest.second]++;
+ if (DestPopularity.empty())
+ return nullptr;
+
// Find the most popular dest.
DenseMap<BasicBlock*, unsigned>::iterator DPI = DestPopularity.begin();
BasicBlock *MostPopularDest = DPI->first;
@@ -1629,8 +1632,20 @@ bool JumpThreadingPass::ProcessThreadabl
// threadable destination (the common case) we can avoid this.
BasicBlock *MostPopularDest = OnlyDest;
- if (MostPopularDest == MultipleDestSentinel)
+ if (MostPopularDest == MultipleDestSentinel) {
+ // Remove any loop headers from the Dest list, ThreadEdge conservatively
+ // won't process them, but we might have other destination that are eligible
+ // and we still want to process.
+ erase_if(PredToDestList,
+ [&](const std::pair<BasicBlock *, BasicBlock *> &PredToDest) {
+ return LoopHeaders.count(PredToDest.second) != 0;
+ });
+
+ if (PredToDestList.empty())
+ return false;
+
MostPopularDest = FindMostPopularDest(BB, PredToDestList);
+ }
// Now that we know what the most popular destination is, factor all
// predecessors that will jump to it into a single predecessor.
Added: llvm/branches/release_60/test/Transforms/JumpThreading/header-succ.ll
URL: http://llvm.org/viewvc/llvm-project/llvm/branches/release_60/test/Transforms/JumpThreading/header-succ.ll?rev=333577&view=auto
==============================================================================
--- llvm/branches/release_60/test/Transforms/JumpThreading/header-succ.ll (added)
+++ llvm/branches/release_60/test/Transforms/JumpThreading/header-succ.ll Wed May 30 11:50:22 2018
@@ -0,0 +1,99 @@
+; RUN: opt -S -jump-threading < %s | FileCheck %s
+
+; Check that the heuristic for avoiding accidental introduction of irreducible
+; loops doesn't also prevent us from threading simple constructs where this
+; isn't a problem.
+
+declare void @opaque_body()
+
+define void @jump_threading_loopheader() {
+; CHECK-LABEL: @jump_threading_loopheader
+top:
+ br label %entry
+
+entry:
+ %ind = phi i32 [0, %top], [%nextind, %latch]
+ %nextind = add i32 %ind, 1
+ %cmp = icmp ule i32 %ind, 10
+; CHECK: br i1 %cmp, label %latch, label %exit
+ br i1 %cmp, label %body, label %latch
+
+body:
+ call void @opaque_body()
+; CHECK: br label %entry
+ br label %latch
+
+latch:
+ %cond = phi i2 [1, %entry], [2, %body]
+ switch i2 %cond, label %unreach [
+ i2 2, label %entry
+ i2 1, label %exit
+ ]
+
+unreach:
+ unreachable
+
+exit:
+ ret void
+}
+
+; We also need to check the opposite order of the branches, in the switch
+; instruction because jump-threading relies on that to decide which edge to
+; try to thread first.
+define void @jump_threading_loopheader2() {
+; CHECK-LABEL: @jump_threading_loopheader2
+top:
+ br label %entry
+
+entry:
+ %ind = phi i32 [0, %top], [%nextind, %latch]
+ %nextind = add i32 %ind, 1
+ %cmp = icmp ule i32 %ind, 10
+; CHECK: br i1 %cmp, label %exit, label %latch
+ br i1 %cmp, label %body, label %latch
+
+body:
+ call void @opaque_body()
+; CHECK: br label %entry
+ br label %latch
+
+latch:
+ %cond = phi i2 [1, %entry], [2, %body]
+ switch i2 %cond, label %unreach [
+ i2 1, label %entry
+ i2 2, label %exit
+ ]
+
+unreach:
+ unreachable
+
+exit:
+ ret void
+}
+
+; Check if we can handle undef branch condition.
+define void @jump_threading_loopheader3() {
+; CHECK-LABEL: @jump_threading_loopheader3
+top:
+ br label %entry
+
+entry:
+ %ind = phi i32 [0, %top], [%nextind, %latch]
+ %nextind = add i32 %ind, 1
+ %cmp = icmp ule i32 %ind, 10
+; CHECK: br i1 %cmp, label %latch, label %exit
+ br i1 %cmp, label %body, label %latch
+
+body:
+ call void @opaque_body()
+; CHECK: br label %entry
+ br label %latch
+
+latch:
+ %phi = phi i32 [undef, %entry], [0, %body]
+ %cmp1 = icmp eq i32 %phi, 0
+ br i1 %cmp1, label %entry, label %exit
+
+exit:
+ ret void
+}
More information about the llvm-branch-commits
mailing list