[lldb-dev] RFC: Processor Trace Support in LLDB
Walter via lldb-dev
lldb-dev at lists.llvm.org
Mon Sep 21 12:50:24 PDT 2020
Hi Eric, thanks for the feedback
> Something I think would be good would be to compare/contrast against rr
as an "exploring alternatives" section of the document.
I'll include that. I've done some comparative research on rr and I think I
can provide valuable input.
> I think the document should also be made available/adapted to be part of
the documentation on "why lldb is implementing this feature/what it can be
used for/why".
I think this information is scattered throughout the document, but I'll
make sure to answer this in one of the first paragraphs.
Thanks!
- Walter
Il giorno ven 18 set 2020 alle ore 19:58 Eric Christopher <
echristo at gmail.com> ha scritto:
> Hi Walter,
>
> I've only done a brief scan of the document but, in general, I'm favorable
> of the goals, aim, and approach. Something I think would be good would be
> to compare/contrast against rr as an "exploring alternatives" section of
> the document. I think the document should also be made available/adapted to
> be part of the documentation on "why lldb is implementing this feature/what
> it can be used for/why".
>
> Thanks so much for starting this and looking forward to the work and
> collaboration.
>
> -eric
>
> On Thu, Sep 17, 2020 at 8:28 PM Walter via lldb-dev <
> lldb-dev at lists.llvm.org> wrote:
>
>> Hi all,
>>
>>
>>
>> Here I propose, along with Greg Clayton, Processor Trace support for LLDB. I’m attaching a link to the document that contains this proposal if that’s easier to read for you: https://docs.google.com/document/d/1cOVTGp1sL_HBXjP9eB7qjVtDNr5xnuZvUUtv43G5eVI/edit#heading=h.t5mblb9ugv8f <https://urldefense.proofpoint.com/v2/url?u=https-3A__docs.google.com_document_d_1cOVTGp1sL-5FHBXjP9eB7qjVtDNr5xnuZvUUtv43G5eVI_edit-23heading-3Dh.t5mblb9ugv8f&d=DwMGaQ&c=5VD0RTtNlTh3ycd41b3MUw&r=erxV6KMIZvIQjyWYW8YpOiKz-WqJt4giKQA34YMHsRY&m=DuuwXHUQJpW4TcCay4hPsBund-eBI2uVaVimqEPsp5k&s=o6vqoYYbn-Tz_d34hoLJvWhEnnhracOO6yDsMzq8wR0&e=>. Please make any comments in this mail list.
>>
>>
>>
>> If you want to quickly know what Processor Trace can do, you can read this https://easyperf.net/blog/2019/08/23/Intel-Processor-Trace <https://urldefense.proofpoint.com/v2/url?u=https-3A__easyperf.net_blog_2019_08_23_Intel-2DProcessor-2DTrace&d=DwMGaQ&c=5VD0RTtNlTh3ycd41b3MUw&r=erxV6KMIZvIQjyWYW8YpOiKz-WqJt4giKQA34YMHsRY&m=DuuwXHUQJpW4TcCay4hPsBund-eBI2uVaVimqEPsp5k&s=iaErHaf8byXlZb1YFUk0BpQ-duMhNouUUMyktLm3soQ&e=>.
>>
>>
>>
>> Any comments are appreciated, especially the ones regarding the commands the user will interact with.
>>
>>
>>
>> Thanks,
>>
>> Walter Erquinigo.
>>
>>
>>
>>
>>
>> # RFC: Processor Trace Support in LLDB
>>
>>
>>
>>
>>
>> # What is processor tracing?
>>
>>
>>
>> Processor tracing works by capturing information about the execution of a process so that the control flow of the program can be reconstructed later. Implementations of this are Intel Processor Trace for X86, x86_64 ([https://software.intel.com/content/www/us/en/develop/blogs/processor-tracing.html](https://software.intel.com/content/www/us/en/develop/blogs/processor-tracing.html)) and ARM CoreSight for some ARM devices ([https://developer.arm.com/ip-products/system-ip/coresight-debug-and-trace](https://developer.arm.com/ip-products/system-ip/coresight-debug-and-trace)).
>>
>>
>>
>> As a clarifying example, with these technologies it’s possible to trace all the threads of a process, and after the process has finished, reconstruct every single instruction address each thread has executed. This could include some additional information like timestamps, async CPU events, kernel instructions, bus clock ratio changes, etc. On the other hand, memory and registers are not traced as a way to limit the size of the trace.
>>
>>
>>
>>
>>
>> # Intel Processor Trace as the first implementation
>>
>>
>>
>> We’ll focus on Intel Processor Trace (Intel PT), but in a generic way so that in the future similar technologies can be onboarded in LLDB.
>>
>>
>>
>> Intel PT has the following features:
>>
>>
>>
>>
>>
>>
>>
>> * Control flow tracing in a highly encoded format
>>
>> * 3% to 5% slowdown when capturing
>>
>> * No memory nor registers captured
>>
>> * Kernel tracing support
>>
>> * Timestamps of branches are produced, which can be used for profiling
>>
>> * Adjustable size of trace buffer
>>
>> * Supported on most Intel CPUs since 2015
>>
>> * X86 and x86_64 only
>>
>> * Official support only on Linux
>>
>> * Basic support on Windows
>>
>> * Decoding/analysis can be done on any operating system
>>
>>
>>
>> A very nice introduction to Intel PT can be found [https://software.intel.com/content/www/us/en/develop/blogs/processor-tracing.html](https://software.intel.com/content/www/us/en/develop/blogs/processor-tracing.html) and [https://easyperf.net/blog/2019/08/23/Intel-Processor-Trace](https://easyperf.net/blog/2019/08/23/Intel-Processor-Trace). Totally recommended to fully grasp the impact of this project.
>>
>>
>>
>> More technical details are in [https://github.com/torvalds/linux/blob/master/tools/perf/Documentation/perf-intel-pt.txt](https://github.com/torvalds/linux/blob/master/tools/perf/Documentation/perf-intel-pt.txt).
>>
>>
>>
>> Even more technical details are in the processor manual [https://www.intel.com/content/dam/www/public/us/en/documents/manuals/64-ia-32-architectures-software-developer-vol-3c-part-3-manual.pdf](https://www.intel.com/content/dam/www/public/us/en/documents/manuals/64-ia-32-architectures-software-developer-vol-3c-part-3-manual.pdf)
>>
>>
>>
>>
>>
>> # Basic Definitions
>>
>>
>>
>>
>>
>>
>>
>> * Trace file: A trace file basically contains the information of the target addresses of each branch or jump within the program execution in a highly encoded format.
>>
>> * Capturing: The act of tracing a process and producing a trace file.
>>
>> * Decoding: Decoding outputs a sequential list of instructions given a trace file and the images of a process. Decoding is generally an offline step as it’s expensive.
>>
>> * Trace buffer: In order to limit the size of the trace, an on-memory circular buffer can be used, keeping the most recent branching information. The trace file is a snapshot of this.
>>
>> * Gap: Sporadically some branching information can be lost or be impossible to decode, which creates a gap in the reconstructed control flow.
>>
>>
>>
>>
>>
>> # New LLDB features
>>
>>
>>
>>
>>
>>
>>
>> * Loading traces: We want to load traces potentially from other computers, and have LLDB symbolicating it. A flow like the following should be possible \
>>
>>
>>
>>
>>
>> ```
>>
>> $ trace load /path/to/trace
>>
>> $ trace dump --instructions
>>
>> pid: '1234', tid: '1981309'
>>
>> a.out`main
>>
>> [57] 0x400549 <+13>: movl %eax, -0x4(%rbp)
>>
>> a.out`bar()
>>
>> [56] 0x40053b <+46>: retq
>>
>> [55] 0x40053a <+45>: leave
>>
>> [54] 0x400537 <+42>: movl -0x4(%rbp), %eax
>>
>> [53] 0x400535 <+40>: jle 0x400525 ; <+24> at main.cpp:7
>>
>> [52] 0x400531 <+36>: cmpl $0x3, -0x8(%rbp)
>>
>> [51] 0x40052d <+32>: addl $0x1, -0x8(%rbp)
>>
>> [50] 0x40052a <+29>: addl %eax, -0x4(%rbp)
>>
>> a.out`foo()
>>
>> [49] 0x400567 <+15>: retq
>>
>> [48] 0x400566 <+14>: popq %rbp
>>
>> [47] 0x400563 <+11>: movl -0x4(%rbp), %eax
>>
>> [46] 0x40055c <+4>: movl $0x2a, -0x4(%rbp)
>>
>>
>>
>> ...
>>
>> [1] 0x400559 <+1>: movq %rsp, %rbp
>>
>> [0] 0x400558 <+0>: pushq %rbp
>>
>>
>>
>>
>>
>> // Format:
>>
>> ```
>>
>>
>>
>>
>>
>>
>>
>> ` // [instruction index] <instruction disassembly> \
>>
>> `Notice the resemblance to loading a core file, but in this case we can get the control flow, printed in reverse order in this example.
>>
>>
>>
>>
>>
>>
>>
>> * Decoding: LLDB can use libipt ([https://github.com/intel/libipt](https://github.com/intel/libipt)), which is the low level Intel PT decoding library, to convert trace files into instructions.
>>
>> * Showing instructions: LLDB can output the list of instructions of the control flow, as shown above
>>
>> * Showing function calls: Similarly, LLDB can print a hierarchical view of the function calls. A flow like this should be possible: \
>>
>>
>>
>>
>>
>> ```
>>
>> $ trace load /path/to/trace
>>
>> $ trace dump --function-calls
>>
>> pid: '1234', tid: '1981309'
>>
>> [50] a.out`bar() 0x40052a
>>
>> [45] a.out`zaz() 0x400558
>>
>> [40] a.out`baz() 0x400559
>>
>> [30] a.out`foo() 0x400567
>>
>> ```
>>
>>
>>
>>
>>
>>
>>
>> ` [0] a.out`main 0x400000 \
>>
>> \
>>
>> `This functionality allows LLDB to reconstruct the call stack at any point and potentially do reverse debugging.
>>
>>
>>
>> * Capturing: LLDB can also do the Intel PT capturing of a live process, so that at any stop the user can do reverse stepping or simply inspect the trace. A possible flow is:
>>
>>
>>
>> ```
>>
>> $ <stopped at main>
>>
>> $ b main.cpp:50
>>
>> $ trace start intel-pt // this initiates the tracing
>>
>> $ continue
>>
>> $ <stopped at main.cpp:50>
>>
>> $ trace dump --instructions
>>
>> pid: '1234', tid: '1981309'
>>
>> a.out`main
>>
>> [57] 0x400549 <+13>: movl %eax, -0x4(%rbp)
>>
>> a.out`bar()
>>
>> [56] 0x40053b <+46>: retq
>>
>> [55] 0x40053a <+45>: leave
>>
>> ```
>>
>>
>>
>>
>>
>>
>>
>> Displaying time information: If the trace contains timing information, we could also display it along with each instruction, e.g.
>>
>>
>>
>>
>>
>> ```
>>
>> a.out`bar()
>>
>> [56: 1600284226]: 0x40053b <+46>: retq
>>
>> ...
>>
>> [4: 1600284200]: 0x40053a <+45>: leave
>>
>> // Format:
>>
>> // [instruction index: unix timestamp] <instruction disassembly>
>>
>> ```
>>
>>
>>
>>
>>
>>
>>
>> Furthermore, we could display the time spent in each function.
>>
>>
>>
>>
>>
>>
>>
>> # Future LLDB features
>>
>>
>>
>>
>>
>>
>>
>> * Reverse Stepping: With the hierarchical reconstruction of the function calls, along with the individual instructions, LLDB can offer reverse stepping. Operations like reverse-next, reverse-step-out, reverse-continue could work by traversing the trace. We plan to work on this once the features presented above are in place.
>>
>> * Trace-based profiling
>>
>> * SB API of the mentioned features
>>
>>
>>
>>
>>
>> # Why is this useful?
>>
>>
>>
>>
>>
>>
>>
>> * Bug root-causing:
>>
>> * For example, a crash in a production Release build ends up being analyzed with logs, a coredump, and a stack trace. Logs are not comprehensive, and a stack trace only contains the final state of the program. Providing the user with the control flow of the last milliseconds gives a tremendous amount of information that is game-changing in root-causing issues. It could be said that the user goes from a single stack trace to a list of stack traces.
>>
>> * Reverse stepping enables more efficient debugging, as it reduces the number of iterations to efficiently root-cause bugs. More often than not, reproducing a bug takes a considerable amount of time, and the user needs to reproduce it several times until the correct breakpoints are hit. This takes a considerable amount of time. Giving the user the information of what has been executed so far can help them figuring out where’s the location to place a breakpoint, or to very easily figure out what went wrong.
>>
>> * Low cost: unlike other similar technologies, Intel PT has an almost negligible performance cost regardless of whether the build is optimized or not, making it appealing to a wide range of scenarios.
>>
>> * This infrastructure can be used for enabling other tools like non-sample-based profilers with instruction-level accuracy, security analyzers that check if certain memory regions are executed, and trace comparators, which could find bugs by comparing similar traces.
>>
>>
>>
>>
>>
>> # Goals of this document:
>>
>>
>>
>>
>>
>>
>>
>> * Gather feedback on the basic Trace implementation, which would include the following basic operations: loading, decoding, and dumping.
>>
>> * Create awareness about this work.
>>
>> * Get a green light on the current set of patches implementing this feature starting with https://reviews.llvm.org/D85705.
>>
>>
>>
>>
>>
>> # Non-Goals:
>>
>>
>>
>>
>>
>>
>>
>> * Discuss how reverse-stepping will be implemented. This can be left for another discussion. Once the Trace architecture is in place and robust, reverse-stepping can then be discussed, as it’s a more controversial change than this one.
>>
>> * Explain thoroughly Intel PT.
>>
>>
>>
>>
>>
>> # Existing Tool Support
>>
>>
>>
>>
>>
>>
>>
>> * GDB has a basic implementation of the features above ([https://sourceware.org/gdb/onlinedocs/gdb/Process-Record-and-Replay.html](https://sourceware.org/gdb/onlinedocs/gdb/Process-Record-and-Replay.html)) and some ideas are taken from there.
>>
>> * Perf is a standalone tool that can do capturing and decoding.
>>
>> * The Linux kernel has full support for doing capturing at thread, logical cpu or cgroup level.
>>
>> * Intel developed a basic version of Intel PT support in LLDB as an external plugin. [https://reviews.llvm.org/D33674](https://reviews.llvm.org/D33674), [https://reviews.llvm.org/rG307db0f8974d1b28d7b237cb0d50895efc7f6e6b](https://reviews.llvm.org/rG307db0f8974d1b28d7b237cb0d50895efc7f6e6b).
>>
>>
>>
>>
>>
>> # New Trace Commands
>>
>>
>>
>> Based on this patch [https://reviews.llvm.org/D85705](https://reviews.llvm.org/D85705), there would be a common Trace class along with plug-in implementations.
>>
>>
>>
>>
>>
>> ## Trace loading
>>
>>
>>
>>
>>
>> ### $ trace load /path/to/trace/settings/file.json
>>
>>
>>
>> As decoding a trace requires the images of the object files, the trace files and some CPU information, it’s convenient to have a JSON file that describes an entire trace session. The following JSON schema could be used.
>>
>>
>>
>>
>>
>> ```
>>
>> {
>>
>> "trace": {
>>
>> … // plug-in specific information
>>
>> },
>>
>> "processes": [ // process information common to all trace plug-ins
>>
>> {
>>
>> "pid": integer,
>>
>> "triple": string, // llvm-triple
>>
>> "threads": [
>>
>> {
>>
>> "tid": integer,
>>
>> "traceFile": string
>>
>> }
>>
>> ],
>>
>> "modules": [
>>
>> {
>>
>> "systemPath": string, // original path of the module at runtime
>>
>> "file"?: string, // copy of the file if not available at "systemPath"
>>
>> "loadAddress": string, // string address in hex or decimal form
>>
>> "uuid"?: string,
>>
>> }
>>
>> ]
>>
>> }
>>
>> ]
>>
>> }
>>
>> // Notes:
>>
>> // All paths are either absolute or relative to the settings file.
>>
>> ```
>>
>>
>>
>>
>>
>> **Corefiles:**
>>
>>
>>
>> We plan to extend this schema to support corefiles, but we would leave it out of this discussion, as can be easily seen as an extension of this basic schema.
>>
>>
>>
>> **Implementation details:**
>>
>>
>>
>> To make our first implementation easier, we’ll ask for an individual trace file per thread. This is the simpler collection mode for Intel PT.
>>
>>
>>
>> The entire json file will be translated into a Trace object, which contains the trace information of each thread and process in it.
>>
>>
>>
>> Each process in the json file will be represented as a new Target. Similarly, threads and modules for each target will be created following the json file. This is very similar to what loading a minidump or coredump does.
>>
>>
>>
>> Each Target will be associated with a Trace, and multiple targets can share the same Trace. The contract is that Trace is assumed to end at the current PC of each thread of the target.
>>
>>
>>
>>
>>
>> ### $ trace schema <plug-in>
>>
>>
>>
>> This command prints the JSON schema of the trace settings file for the provided plug-in. It would output something similar to this
>>
>>
>>
>>
>>
>> ```
>>
>> {
>>
>> "trace": {
>>
>> "type": "intel-pt",
>>
>> "pt_cpu": {
>>
>> "vendor": "intel" | "unknown",
>>
>> "family": integer,
>>
>> "model": integer,
>>
>> "stepping": integer
>>
>> }
>>
>> },
>>
>> "processes": [
>>
>> {
>>
>> "pid": integer,
>>
>> "triple": string, // llvm-triple
>>
>> "threads": [
>>
>> {
>>
>> "tid": integer,
>>
>> "traceFile": string
>>
>> }
>>
>> ],
>>
>> "modules": [
>>
>> {
>>
>> "systemPath": string, // original path of the module at runtime
>>
>> "file"?: string, // copy of the file if not available at "systemPath"
>>
>> "loadAddress": string, // string address in hex or decimal form
>>
>> "uuid"?: string,
>>
>> }
>>
>> ]
>>
>> }
>>
>> ]
>>
>> }
>>
>> // Notes:
>>
>> // All paths are either absolute or relative to the settings file.
>>
>> ```
>>
>>
>>
>>
>>
>>
>>
>> ### $ trace dump [--verbose] [-t tid1] [-t tid2] ...
>>
>>
>>
>> Print the trace information corresponding to the provided thread ids of the currently selected target, which would mainly include the same information as the trace settings file. If no tid is provided, the currently selected thread is used. This would be useful for debugging. The information would be like
>>
>>
>>
>> Modules:
>>
>>
>>
>> <module info like systemPath, file, load address, uuid, size>
>>
>>
>>
>> Threads:
>>
>>
>>
>> <thread info like location of trace file, number of instructions (if already decoded), number of function calls (if already decoded)>
>>
>>
>>
>> If <--verbose> is passed, the original settings.json file is printed as well.
>>
>>
>>
>>
>>
>> ## Decoder-based commands
>>
>>
>>
>> The following commands require decoding the trace and are of the form. “trace dump <action> [-t <tid>]”. If tids are not specified, then the current thread or the current target will be used.
>>
>>
>>
>>
>>
>> ### $ trace dump --instructions [-t <tid>] [-c <count> = 10] [-o <offset> = 0]
>>
>>
>>
>> This command would print the last <count> instructions starting at the given offset from the last instruction in the trace. The output would be similar to that of the “disassembly” command and would include timing information if available.
>>
>>
>>
>>
>>
>> ```
>>
>> $ trace dump --instructions -c 5
>>
>> pid: '1234', tid: '1981309'
>>
>> a.out`main
>>
>> [57] 0x400549 <+13>: movl %eax, -0x4(%rbp)
>>
>> a.out`bar()
>>
>> [56] 0x40053b <+46>: retq
>>
>> [55] 0x40053a <+45>: leave
>>
>> [54] error -13. 'no memory mapped at this address'
>>
>> a.out`foo()
>>
>> [53] 0x400567 <+15>: retq
>>
>> ```
>>
>>
>>
>>
>>
>> Repeating the command would continue printing where it was left off in the last run.
>>
>>
>>
>> **Implementation details:**
>>
>>
>>
>> Each instruction output by the decoder is either an actual instruction or an error. An error can be caused due to a collection error (e.g. internal CPU buffer overflow error) or a decoding error (e.g. the image of an object file is missing while decoding). These errors represent gaps in the trace and the user should know about them, so we print them accordingly in this dump.
>>
>>
>>
>> Each instruction (including errors) has an index in the decoded trace, and serves as a checkpoint.
>>
>>
>>
>>
>>
>> ### $ trace dump --function-calls [-t <tid>] [-c <count> = 10] [-o <offset> = 0] [--flat]
>>
>>
>>
>> This command would print the hierarchical list of function calls. Similar to the “--instructions” command, it would show the last <count> function calls with the given offset from the last instructions. Timing information would be included if available.
>>
>>
>>
>>
>>
>> ```
>>
>> $ trace dump --function-calls
>>
>> pid: '1234', tid: '1981309'
>>
>> [50] a.out`bar() 0x40052a
>>
>> [45] a.out`zaz() 0x400558
>>
>> [40] a.out`baz() 0x400559
>>
>> [30] a.out`foo() 0x400567
>>
>> [0] a.out`main 0x400000
>>
>> ```
>>
>>
>>
>>
>>
>> Repeating the command would continue printing where it was left off in the last run.
>>
>>
>>
>> If <--flat> is passed, then instead of a hierarchical view, a flat list would be produced.
>>
>>
>>
>>
>>
>> ## Capturing command
>>
>>
>>
>>
>>
>> ### $ trace start <plugin_name> [-t <tid>] [--all] [-b <buffer_size_in_KB>]
>>
>>
>>
>> This command will start tracing the given thread of the currently selected target, or all the threads of that target if “--all” is passed. If “--all” is passed, any thread created after this command will also be traced automatically.
>>
>>
>>
>> Besides, the optional -b parameter can define the size of each trace buffer to be created. I haven’t yet decided a default one, but 1M might be acceptable, as it traces around 1 million instructions on average according to Intel, and that’s more than enough for a useful analysis.
>>
>>
>>
>> For an initial implementation, the plugin_name parameter will be required (e.g. intel-pt). Later a more automated mechanism for finding the right plugin can be implemented.
>>
>>
>>
>> **Implementation notes:**
>>
>>
>>
>> There’s already a basic implementation in lldb as an external plugin. It’s in [https://reviews.llvm.org/source/llvm-github/browse/master/lldb/tools/intel-features/intel-pt/](https://reviews.llvm.org/source/llvm-github/browse/master/lldb/tools/intel-features/intel-pt/) created by [https://reviews.llvm.org/rG307db0f8974d1b28d7b237cb0d50895efc7f6e6b](https://reviews.llvm.org/rG307db0f8974d1b28d7b237cb0d50895efc7f6e6b). It hasn’t received much attention and has been mostly unmaintained since it was created. It’s already capable of tracing a given thread and collecting the trace buffer. We plan to reuse that logic, which is already working.
>>
>>
>>
>> A Trace object will be created and will be associated with the current Target.
>>
>>
>>
>> Any interaction with trace, like dumping instructions, will trigger a fetch of the most recent trace buffer, unless it hasn’t changed.
>>
>>
>>
>> When multiple threads are traced, each one will have its own trace buffer, as sharing one buffer in multiple threads requires knowing when each context switch happened so that the decoded trace can be split correctly among threads. This is beyond the scope of the initial version of this project.
>>
>>
>>
>>
>>
>> ### $ trace save /path/to/file.json [--copy-images]
>>
>>
>>
>> This creates a bundle trace with settings saved in the given json file for the current process. By default, it doesn’t create any copy of the images loaded on the process, unless the “--copy-images” parameter is specified. That parameter is useful for analyzing the trace in a machine other than where it was captured.
>>
>>
>>
>>
>>
>> # Remote Protocol Changes
>>
>>
>>
>> No remote protocol changes are required, as [https://reviews.llvm.org/D33674](https://reviews.llvm.org/D33674) and [https://reviews.llvm.org/rG307db0f8974d1b28d7b237cb0d50895efc7f6e6b](https://reviews.llvm.org/rG307db0f8974d1b28d7b237cb0d50895efc7f6e6b) already created them some years ago.
>>
>>
>>
>>
>>
>> # Build Requirements
>>
>>
>>
>> In order to build LLDB with this support, it has to be linked with a build of libipt [https://github.com/intel/libipt](https://github.com/intel/libipt), which is the decoder.
>>
>>
>>
>>
>>
>> # Operating System Requirements for Collection/Tracing
>>
>>
>>
>> Collection can only be done on linux if the file /sys/bus/event_source/devices/intel_pt/type is defined. The logic gating this feature is already checked in and defined in [https://reviews.llvm.org/D33674](https://reviews.llvm.org/D33674).
>>
>>
>>
>>
>>
>> # Testing
>>
>>
>>
>> It’s fortunately straightforward to test this feature. It’s possible to capture traces with perf or with the future “trace start” / ”trace save” commands and create trace bundles with their corresponding settings .json file. Analyzing those traces should give the same results on any machine, making testing deterministic. [https://reviews.llvm.org/D85705](https://reviews.llvm.org/D85705) and descendents already implement some deterministic tests.
>>
>> _______________________________________________
>> lldb-dev mailing list
>> lldb-dev at lists.llvm.org
>> https://lists.llvm.org/cgi-bin/mailman/listinfo/lldb-dev
>>
>
--
- Walter Erquínigo Pezo
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.llvm.org/pipermail/lldb-dev/attachments/20200921/2fc77ad5/attachment-0001.html>
More information about the lldb-dev
mailing list