[lldb-dev] RFC: AArch64 Linux Memory Tagging Support for LLDB

[Omair Javaid via lldb-dev]

Hi Jason,

I wanted to bring this to your attention that we are also working on
pointer authentication support. We have so far only done register context
changes to allow for enabling/disabling pointer authentication features and
read/write pauth Cmask/Dmask registers when available. I am currently
investigating unwinder support which means any further implementation from
my side will be an overlap with what you guys have done already. There can
also be design conflicts and I would really appreciate it if we can come on
some common ground regarding upstreaming of Apple's downstream pointer
authentication patches. We may collaborate and upstream unwinder support.

Thanks!

On Tue, 11 Aug 2020 at 04:13, Jason Molenda via lldb-dev <
lldb-dev at lists.llvm.org> wrote:

> Hi David, thanks for the great writeup.  I hadn't been following the gdb
> MTE support.
>
> This all looks reasonable to me.  A few quick thoughts --
>
> The initial idea of commands like "memory showptrtag", "memory showtag",
> "memory checktag" - it might be better to put all of these under "memory
> tag ...", similar to how "breakpoint command ..." works.
>
> It makes sense to have lldb read/write the control pseudo-register as if
> it were a normal reg, in its own register grouping.  You mentioned that you
> had some thoughts about how to make it more readable to users - I know this
> is something Greg has been hoping to do / see done at some point, for
> control registers where we could annotate the registers a lot better.  I
> noticed that qemu for x86 provides exactly this kind of annotation
> information in its register target.xml definitions (v.
> lldb/test/API/functionalities/gdb_remote_client/TestRegDefinitionInParts.py
> ) but I don't THINK we do anything with these annotations today.  Not at
> all essential to this work, but just noting that this is something we all
> would like to see better support for.
>
> As for annotating the reason the program stopped on an MTE exception,
> Ismail was working on something similar in the past - although as you note,
> the really cool thing would be decoding the faulting instruction to
> understand what target register was responsible for the fault (and maybe
> even working back via the debug info to figure out what user-level variable
> it was??) to annotate it, which is something we're not doing anywhere right
> now.  There was a little proof-of-concept thing that Sean Callanan did
> years ago "frame diagnose" which would try to annotate to the user in
> high-level source terms why a fault happened, but I think it was using some
> string matching of x86 instructions to figure out what happened. :)
>
> We're overdue to upstream the PAC support for lldb that we're using, it's
> dependent on some other work being upstreamed that hasn't been done yet,
> but the general scheme involves querying the lldb-server / debugserver /
> corefile to get the number of bits used for virtual addressing, and then it
> just stomps on all the other high bits when trying to dereference values.
> If you do 'register read' of a function pointer, we show the actual value
> with PAC bits, then we strip the PAC bits off and if it resolves to a
> symbol, we print the stripped value and symbol that we're pointing to. It
> seems similar to what MTE will need -- if you have a variable pointing to
> heap using MTE, and you do `x/g var`, lldb should strip off the MTE bits
> before sending the address to read to lldb-server. The goal with the PAC UI
> design is to never hide the PAC details from the user, but to additionally
> show the PAC-less address when we're sure that it's an address in memory.
> Tougher to do that with MTE because we'll never be pointing to a symbol, it
> will be heap or stack.
>
> J
>
>
>
>
>
> > On Aug 10, 2020, at 3:41 AM, David Spickett via lldb-dev <
> lldb-dev at lists.llvm.org> wrote:
> >
> > Hi all,
> >
> > What follows is my proposal for supporting AArch64's memory tagging
> > extension in LLDB. I think the link in the first paragraph is a good
> > introduction if you haven't come across memory tagging before.
> >
> > I've also put the document in a Google Doc if that's easier for you to
> > read:
> https://docs.google.com/document/d/13oRtTujCrWOS_2RSciYoaBPNPgxIvTF2qyOfhhUTj1U/edit?usp=sharing
> > (please keep comments to this list though)
> >
> > Any and all comments welcome. Particularly I would like opinions on
> > the naming of the commands, as this extension is AArch64 specific but
> > the concept of memory tagging itself is not.
> > (I've added some people on Cc who might have particular interest)
> >
> > Thanks,
> > David Spickett.
> >
> > <begin doc>
> >
> > # RFC: AArch64 Linux Memory Tagging Support for LLDB
> >
> > ## What is memory tagging?
> >
> > Memory tagging is an extension added in the Armv8.5-a architecture for
> AArch64.
> > It allows tagging pointers and storing those tags so that hardware can
> validate
> > that a pointer matches the memory address it is trying to access. These
> paired
> > tags are stored in the upper bits of the pointer (the “logical” tag) and
> in
> > special memory in hardware (the “allocation” tag). Each tag is 4 bits in
> size.
> >
> >
> https://community.arm.com/developer/ip-products/processors/b/processors-ip-blog/posts/enhancing-memory-safety
> >
> > ## Definitions
> >
> > * memtag - This is the clang name for the extension as in
> > “-march=armv8.5-a+memtag”
> > * mte - An alternative name for mmtag, also the llvm backend name for
> > the extension.
> >  This document may use memtag/memory tagging/MTE at times, they mean
> > the same thing.
> > * logical tag - The tag stored inside a pointer variable (accessible
> > via normal shift and mask)
> > * allocation tag - The tag stored in tag memory (which the hardware
> provides)
> >  for a particular tag granule
> > * tag granule - The amount of memory that a single tag applies to,
> > which is 16 bytes.
> >
> > ## Existing Tool Support
> >
> > * GCC/Clang can generate MTE instructions
> > * Clang has an option to memory tag the stack (discussed later)
> > * QEMU support has been merged
> > * Linux Kernel patches are in progress
> >  (git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
> > “devel/mte-v5” branch)
> > * GDB support is in review and this design takes a lot of direction from
> that
> >  (
> https://sourceware.org/git/?p=binutils-gdb.git;a=shortlog;h=refs/heads/users/luisgpm/aarch64-mte-v2
> )
> >  (originally proposed
> > https://sourceware.org/pipermail/gdb-patches/2019-August/159881.html)
> >
> > ## New lldb features
> >
> > Assuming your software is acting correctly, memory tagging can “just
> work”
> > without debugger support. This assumes the compiler/toolchain/user are
> > always correct.
> >
> > For when that isn’t the case we want to be able to:
> > * Read/write the logical tags in a pointer
> > * Read/write the allocation tags assigned to a given area of memory
> > * Test whether the logical tag in a pointer matches the allocation tag
> of the
> >  memory it refers to
> > * Read/write memory even when tags are mismatched
> >
> > The most obvious use case for this is working through issues where bugs
> in the
> > toolchain don’t generate correct code. On the other hand there’s a good
> case for
> > deliberately messing with pointers in your code to prove that such
> protection
> > actually works.
> >
> > Note: potential extensions to scripting such as tags as attributes of
> values and
> > such are not being proposed here. Of course the new commands will be
> > added in the
> > standard ways so you can use those.
> >
> > ## New Commands
> >
> > ### Command Availability
> >
> > Note: commands will be listed in tab completion and help regardless of
> > these checks
> >
> > * The remote server must support memory tagging packets. lldb will
> send/check
> >  for the “memory-tagging” feature in the qSupported packet. (this
> > name aligns with gdb)
> > * The process must have MTE available. We check HWCAP2_MTE for this.
> > * The process must have enabled tagged addressing using prctl
> >  (see “New Registers” for details)
> > * The address given must be in a range that has MTE enabled, since you
> can mmap
> >  with or without MTE. (this information is in /proc/.../smaps)
> >
> > #### Interaction With Clang’s Stack Tagging
> >
> > We’re relying on the kernel to tell us if MTE is enabled, so stack
> tagging will
> > not be visible to the debugger this way.
> > (
> https://github.com/google/sanitizers/wiki/Stack-instrumentation-with-ARM-Memory-Tagging-Extension-(MTE)
> )
> >
> > E.g. {int x; use(&x); } where x is void x(int* ptr);
> > “ptr” will have a memory tag but the kernel won’t know this.
> >
> > To work around this a setting will be added to tell lldb to assume that
> MTE is
> > enabled, so that you can at least see the logical tags of a pointer.
> > (see “New Settings”)
> >
> > ### General Properties/Errors
> >
> > * <address expression> must resolve to some value that can be handled as
> an
> >  address by lldb. (though it need not be a pointer specifically)
> > * Tags will be printed in hexadecimal to reflect the fact that they are
> a 4 bit
> >  field. (and since tags are randomly generated, ordering is unlikely
> > to be a concern)
> > * Packed tags will be 1 tag per byte (matches what ptrace expects)
> > * Addresses will be rounded down to the nearest granule (not always by
> lldb
> >  itself but what the user sees will look like this)
> > * Ranges are rounded up to a whole number of granules
> > * It is an error to use a command on an address that does not have MTE
> enabled.
> >  (with the exception of “mtag check”)
> >
> > ### Commands
> >
> > #### Avoiding Architecture Specific Naming
> >
> > One problem you might see with the commands below is that they use l/a
> for
> > logical/allocation tags. These names are specific to MTE, for instance
> SPARC’s
> > ADI talks about “versions” instead. This limits the reuse of these
> > commands in the future.
> > (
> https://sourceware.org/gdb/current/onlinedocs/gdb/Sparc64.html#ADI-Support
> )
> >
> > Instead we could first put them under “memory”, then merge the a/l tag
> commands
> > into “memory showtag” and “memory settag” (check -> checktag,
> > getconfig -> tagconfig).
> > Which avoids the arch specific names, though the output will still be.
> >
> > (lldb) memory showtag <addr> <length in bytes>
> > <addr>: logical 0x1 allocation: 0x1 0x2 0x3 ...
> > (lldb) memory settag <addr> <logical tag> <length in bytes> <allocation
> tags...>
> >
> > Length and allocation tags would be optional. We could assume that if
> > we only get
> > the logical tag arg, we should set both kinds of tag. This accommodates
> future
> > systems where there is only one type of tag, or you can only set them
> > all at once.
> >
> > Whatever way you do it, there’s some kind of Arch dependent behaviour.
> >
> > Another option would be to call them the “pointer tag” and the “memory
> tag”.
> > (which lends itself to being “memory tag/ptag” not “mtag mtag/ptag”
> > which is just confusing)
> >
> > (lldb) memory showptrtag <addr>
> > (lldb) memory showtag <addr> <length>
> > (lldb) memory checktag <addr>
> >
> > This makes the most sense to me and avoids having variable numbers of
> arguments
> > to commands.
> >
> > #### mtag showltag <address expression>
> >
> > Show the logical tag contained in the address given.
> >
> > (lldb) mtag showltag a_ptr
> > 0xF
> >
> > Error conditions:
> > * As described above
> >
> > #### mtag setltag <address expression> <tag value expression>
> >
> > Set the logical tag of the variable that <address expression> resolves
> to, to
> > the value <tag value expression> resolves to.
> >
> > (lldb) mtag setltag a_ptr 0xE
> >
> > Error conditions:
> > * Address variable is not writable, e.g ptr+10 we can set a new tag but
> have
> >  nowhere to write it back to.
> > * Tag value is out of 0x0 to 0xF range. (this limit is specific to
> AArch64)
> >
> > #### mtag showatag <address expression> <optional length>
> >
> > Show the allocation tag(s) associated with the granule of memory that
> > <address expression> points to. (this is reading target memory so the
> work will
> > be done in lldb-server)
> >
> > <length> will default to 1 granule, otherwise you can provide a value in
> bytes
> > which will be rounded up to a whole number of granules. E.g 28 bytes
> becomes 32
> > bytes which is two granules so two tags.
> > (note that length of 0 also becomes 1 granule)
> >
> > (lldb) mtag showatag a_ptr
> > [0xfffff7ffa000, 0xfffff7ffa010) : 0xE
> > 0xE
> > (lldb) mtag showatag a_ptr 28
> > [0xfffff7ffa000, 0xfffff7ffa010) : 0xE
> > [0xfffff7ffa010, 0xfffff7ffa020) : 0xF
> >
> > Error conditions:
> > * General failure to read tag memory on the target (a ptrace failure)
> > * Failure to read tags because MTE is not enabled
> > * Given <length> is less than zero
> >
> > #### mtag setatag <address expression> <length> <tags...>
> >
> > Set the allocation tags of the memory in range <address expression> to
> > <address expression> + <length> (where length is rounded up to a whole
> number of
> > granules, meaning length <16 = 1 granule) to the tags in <tags>.
> >
> > Where <tags…> is one or more tag arguments either in hex or decimal.
> Once these
> > are validated they will be each packed with 1 byte per tag in the data
> > sent to lldb-server.
> >
> > Note: this is a break from the current gdb design that has the user type
> the raw
> > bytes. For example:
> > (gdb) mtag setatag a_ptr 32 040F
> >
> > This does make the command more flexible as validation is done server
> side but
> > we’re doing some validation client side for logical tags anyway. The
> > question is,
> > is this added convenience enough to break with gdb?
> > (though if we go with the alternate “memory …” naming scheme proposed
> > above, we might as well)
> >
> > In the example below we’re giving granule 1 at a_ptr a tag of 0x4 and
> granule 2
> > at a_ptr+16 a tag of 0xF. The second example sets the tag of the
> > granule at a_ptr to 0x5.
> >
> > (lldb) mtag setatag a_ptr 32 0x4 15
> > (lldb) mtag setatag a_ptr 1 5
> >
> > In the case that the number of tags given is not enough to cover the
> > memory range,
> > lldb-server will keep repeating the set until it does. Meaning a set of
> 2 tags
> > would be repeated once to cover 4 granules. A set of 3 tags would be
> > written once
> > with the first tag used again for the 4th granule.
> >
> > Error conditions:
> > * Length is not a valid number or is less than 0
> > * One or more tags are out of the valid range of 0-0xF
> >
> > #### mtag check <address expression>
> >
> > Check that the logical tag in <address expression> matches the
> allocation tag
> > set for the granule it points to.
> >
> > (lldb) mtag check a_ptr
> > Failed: logical tag 0x1 does not match allocation tag 0x2
> > (lldb) mtag check non_mte_ptr
> > Memory tagging is not enabled for address non_mte_ptr
> > (lldb) mtag check another_ptr
> > Passed: logical tag 0x1 matches allocation tag 0x1
> >
> > Showing tags for a passed check seems redundant but I think it’s good to
> have as
> > a shortcut. That way you can use “mtag check” instead of “mtag showltag”
> then
> > “mtag showatag” if you want both tags.
> >
> > Error conditions:
> > * Standard handling
> >
> > #### mtag getconfig
> >
> > This command will read the TAGGED_ADDR_CTRL register (see “New
> Register”) and
> > pretty print its values. It's nice to have but certainly isn’t as good
> as being
> > able to pretty print a register in general. (which I don’t think is
> > possible right now)
> >
> > (lldb) mtag getconfig
> > Tagged addressing: Enabled
> > Fault Mode: Synchronous
> > Included Tags: 0b1111000011110000
> > (lldb) mtag getconfig
> > Target process is not MTE enabled.
> >
> > Formatting up for debate of course, the point is you don’t have to shift
> things
> > in your head just to sanity check the debugee’s usage.
> >
> > Note: no “set” for this at this time as I think that’s going to be a
> > much rarer occurrence.
> >
> > ## Modified Commands
> >
> > ### memory region
> >
> > Will use the extra information from the qMemoryRegionInfo packet to show
> the
> > VmFlags where possible. For example:
> >
> > (lldb) memory region addr
> > [0x00007ffff7ed2000-0x00007ffff7fd2000) rw- /dev/zero (deleted)
> > flags:  rd ex mr mw me dw sd mt
> >
> > ### memory read
> >
> > Will not check that logical and allocation tags match, allowing reads
> > regardless.
> > Since most of the time checking is not the user’s intent when doing a
> read and
> > even if it is, there’s “mtag check” for that.
> >
> > It will show allocation tags for memory that is MTE enabled. This is
> > on by default
> > on the basis that some subset of memory will be MTE so if you’re working
> with it
> > then tags are probably relevant. (new setting added to control this)
> >
> > In the ideal scenario this looks like:
> > (lldb) memory read the_page
> > <Allocation tag 0x1 for range [0xfffff7ffa000, 0xfffff7ffa010)>
> > 0xfffff7ffa000: 66 66 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > ff..............
> > <Allocation tag 0x1 for range [0xfffff7ffa010, 0xfffff7ffa020)>
> > 0xfffff7ffa010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > ................
> >
> > Obviously there’s a lot of formatting freedom with the read command so
> > this won’t
> > always be as neat. It could be better to put the tags in the lines like:
> > 0xfffff7ffa000 (tag 0x1): 66 66 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 00  ff..............
> >
> > Then if the lines are <16 bytes each you can repeat the tag in the next
> line.
> > Or for >16 bytes do “(tag 0x1, 0x2)”. This needs some experimentation,
> it could
> > get very confusing if we’re showing the same tag next to two ranges and
> it looks
> > like two separate tags. For example here we’re showing the same tag
> twice:
> >
> > 0xfffff7ffa000 (tag 0x1): 66 66 00 00 00 00 00 00 ff......
> > 0xfffff7ffa008 (tag 0x1): 00 00 00 00 00 00 00 00 ........
> >
> > ### memory write
> >
> > Will allow writes where the tags are mismatched.
> >
> > It will print warnings for granules where the tags do not match. Even
> > if we assume
> > we’re writing a lot of data, if the program is MTE enabled then most of
> the time
> > tags will match. So it’ll only be noise in rare situations. A setting
> will be
> > added to disable them if needed.
> >
> > lldb will read ahead for the tags. So for a write of 64 bytes we read 4
> tags,
> > do the write then warn about any granules that didn’t match.
> >
> > (lldb) memory write the_page 99
> > (lldb) memory write mismtached_ptr 99
> > Warning: Logical Tag 0x1 did not match Allocation tag 0x2 for range
> > [0xfffff7ffb000, 0xfffff7ffb010)
> > (lldb) memory write mismatched_ptr <17 bytes of data>
> > Warning: Logical Tag 0x1 did not match Allocation tag 0x2 for range
> > [0xfffff7ffb000, 0xfffff7ffb010)
> > Warning: Logical Tag 0x1 did not match Allocation tag 0x2 for range
> > [0xfffff7ffb010, 0xfffff7ffb020)
> >
> > Hopefully “Warning” is enough to indicate that the write was still
> > done despite the mismatch.
> >
> > ## New Settings
> >
> > Like the commands these settings will be present/visible in help even
> when MTE
> > is not available. The category name will be “memory-tagging”.
> >
> > * assume-tagging-enabled - When handling logical tags in pointers assume
> that
> >  the memory they point to is MTE enabled. This allows you to debug/test
> things
> >  such as Clang’s stack tagging that are not handled by the kernel.
> > (default False)
> > * warn-on-write-tag-mismatch - Print warnings for each mismatching
> granule when
> >  writing with “memory write”. (default True)
> > * show-tags-in-read - Show tags in “memory read” output. (default True)
> >
> > ## New Registers
> >
> > MTE adds 1 new register to the ptrace interface, which is the
> TAGGED_ADDR_CTRL
> > register. User programs use this same register via prctl to enable MTE.
> >
> > It contains:
> > * A 16 bit include mask for tag generation. So with 0xFFFF you only get
> tags of
> >  0, with 0xFFFE you would get tags of 0 or 1, etc.
> >  (the hardware register GCR_EL1 actually has the opposite, an exclude
> mask)
> > * 1 bit to say whether tagged addresses are enabled at all
> > * 1 bit to set the fault mode for mismatched tags. This can be none
> > (ignore failures),
> >  asynchronous or synchronous.
> >
> > So assuming we’re ok with pseudo registers like this being available via
> > “register read/write” it’ll be added to those. Probably under a “MTE
> Registers:”
> > or perhaps “Control Registers:” category.
> > (the latter could include future config regs such as pointer auth
> settings).
> >
> > I say assuming because the current set are all what you’d call
> > hardware registers.
> > (though SVE might change this I’m not sure)
> >
> > In “New Commands” I’ve also sketched out a command to read and pretty
> print the
> > register. Since I think most of the value will come from double
> > checking that you
> > passed the right flags to prctl, rather than modifying it on the fly.
> > (which could be done manually with “register write” if you really wanted
> to)
> >
> > ## SIGSEGV Handling
> >
> > MTE faults raise a SIGSEV with a specific si_code for synchronous or
> > asynchronous.
> > The former includes the address where the fault happened. So this will
> fit into
> > the existing handlers quite easily.
> >
> > (lldb) run
> > <...>
> > Process 19648 stopped
> > * thread #1, name = 'main', stop reason = signal SIGSEGV: Asynchronous
> > tag check fault
> > (lldb) run
> > <...>
> > Process 19648 stopped
> > * thread #1, name = 'main', stop reason = signal SIGSEGV: Synchronous
> > tag check fault (fault address: 0x100000000, allocation tag: 0x1)
> >
> > Showing the allocation tag here is a nice to have, making an extra call
> for this
> > one fault might be awkward. You’d want to look at the logical tag for
> > the pointer
> > that caused the fault, so “mtag check <ptr>” gives you both regardless.
> >
> > Note that the fault address does not include the logical tag used to
> access it.
> > I think we could show the logical tag assuming lldb knows what the
> destination
> > register of the faulting instruction is. I haven’t done the research
> here so I’m
> > not proposing that we should do it for this round of support.
> >
> > ## Corefiles
> >
> > The format of corefiles for MTE is currently undecided so there is
> nothing to
> > mention here yet. Obviously we want to use the new commands to work with
> them
> > once they’re available. Discussion on that design will start shortly.
> >
> > ## Remote Protocol Changes
> >
> > Note: some of lldb-server’s interpretation of packed tags is also
> > described in the “mtag setatag” section above.
> >
> > ### Extending qMemoryRegion
> >
> > qMemoryRegion currently gives us the start/size/permissions and name
> > of a mapping.
> > For MTE we need to view the VmFlags line of the /proc/.../smaps file.
> > This contains
> > the “mt” flag, showing MTE was enabled for that memory.
> >
> > Example entry:
> > 00400000-004f4000 r-xp 00000000 fc:00 6431901
> >  /bin/bash
> > Size:                976 kB
> > <...>
> > VmFlags: rd ex mr mw me dw sd
> >
> > To do this we will add an optional “flags” tuple to the response packet.
> >
> > flags:<flags>;
> > Contain the flags shown on the VmFlags line, encoded as ASCII text just
> like the
> > “name” field is. (spaces remain as the delimiter)
> >
> > This tuple will be optional because Linux kernels before 3.10 do not
> > have this file.
> > (also “flags” not “vmflags” to not be Linux specific)
> >
> > ### qSupported feature
> >
> > The name will be “memory-tagging” to align with the GDB implementation.
> If this
> > feature is supported by the server it means it understands the new
> > packets and the target supports MTE.
> >
> > ### qMemTags (new)
> >
> > Used to read memory tags from the target. (lldb-server will use
> > PTRACE_PEEKMTETAGS to do so)
> >
> > (the “addr,length” format is derived from the existing m/M packets for
> > read/write memory)
> > qMemTags:addr,length:type
> >
> > * addr - big endian hex address of the start of the range to read from.
> >  (the ptrace interface will take care of rounding this down to the
> > nearest granule)
> > * length - big endian hex number of bytes of memory to read tags from.
> >  This will be interpreted by the server to decide how many tags to
> return.
> > * type - a signed int indicating the type of tags being sent. This will
> just be
> >  one value at this time, meaning MTE, but leaves room for future
> > multi tag type systems.
> >
> > Note: The length is interpreted by the server so the packet spec
> > doesn’t tell you
> > how you should do that. For AArch64 MTE lldb-server will be rounding up
> to the
> > nearest granule then returning 1 tag per. So 24 bytes becomes 32,
> > meaning 2 tags.
> >
> > The reply is either:
> > * “mXX...” - (literal ‘m’) where XX is the hex encoded bytes of the tags
> read.
> >  (one tag per byte)
> > * “E nn” - An error code if one occurred. This will only be ‘01’ for
> > the time being.
> >  (it may prove useful to pass the ptrace error numbers through here
> > but it’s not
> >  needed for the current implementation)
> > * Empty reply - meaning the server doesn’t support this packet
> >  (in case the client didn’t pre-check this)
> >
> > Note: The ‘m’ to start the tag data is present to support potential
> multi part
> > replies, where the last part would have ‘l’ instead.
> >
> > Example exchange, reading the tags for the next 24 bytes of memory:
> > $qMemTags:CAFEFOOD,18:1#<checksum>
> > $m0E0F#<checksum>
> >
> > ### QMemTags (new)
> >
> > Write memory tags to the target. (lldb-server will use
> > PTRACE_POKEMTETAGS to do this)
> >
> > QMemTags:address,length:type:tags
> >
> > * address - big endian hex address of the start of the range to write to.
> >  (which the ptrace interface will align for us)
> > * length - big endian hex length in bytes of the range to be written
> > to (see note)
> > * type - signed int indicating the tag type. For now there will only
> > be one value,
> >  which means MTE.
> > * tags - hex encoded bytes of the tags to be written (one tag per
> > byte/per 2 hex chars)
> >
> > Note: The length does not have to match the number of tags given. If it
> is more
> > than the given tags can cover, the tags are taken as a pattern to apply.
> > Examples: (remember 1 tag covers 1 granule/16 bytes)
> >
> > Write 0 tags to 16 bytes -> Error, must have at least one tag to use
> > Write 1 tag to 0 bytes -> round up to next granule making 16, so write
> > tag to 1st granule
> > Write 1 tag to 16 bytes -> writes 1st tag to 1st granule
> > Write 1 tag to 32 bytes -> writes 1st tag to the 1st and 2nd granule
> > Write 2 tags to 16 bytes -> writes the 1st tag to the 1st granule, 2nd
> > tag is unused
> >
> > In this way you can do bulk operations like clear all tags or stripe
> > them throughout some range.
> >
> > Example packet, writing the tags for the next 24 bytes of memory.
> > Setting granule
> > 1 to 0xE and the next to 0xF:
> > $QMemTags:CAFEFOOD,18:1:0E0F#<checksum>
> >
> > ## Toolchain Requirements
> >
> > We’re just using ptrace interfaces for this, we do not need tools
> capable of
> > assembling MTE instructions to be able to build. So there’ll be another
> header
> > in source/Plugins/Process/Linux/ containing the ptrace defines.
> >
> > For some of the testing we will need an MTE toolchain to compile the
> > test programs,
> > same for corefiles.
> >
> > ## Testing
> >
> > As much as possible will be done without needing an MTE system. Tests
> that need
> > an actual memory tagging enabled system will be tested using QEMU system
> mode
> > emulation. A document will be added to lldb’s documentation describing
> > how to run
> > the tests. (or added to the SVE testing docs)
> >
> > ## Interaction with Pointer Authentication
> >
> > Armv8.3-a Pointer Authentication (PAC) also uses the upper bits of a
> pointer to
> > store metadata. PAC and MTE can be enabled in the same system and will
> share
> > those bits.
> > (ARM ARMv8 “Supported PAC field and relation to the use of address
> tagging”)
> >
> > The position of the MTE tag does not change when PAC is enabled, so
> commands
> > do not need to check this first.
> >
> > I think given the difference between the two schemes they should have
> > separate commands.
> > (MTE being a bitfield, PAC involving keys stored elsewhere)
> > Generic features like reporting mismatched tags/keys when reading memory
> could
> > apply to both so settings regarding that could be named generically.
> >
> > <end doc>
> > _______________________________________________
> > lldb-dev mailing list
> > lldb-dev at lists.llvm.org
> > https://lists.llvm.org/cgi-bin/mailman/listinfo/lldb-dev
>
> _______________________________________________
> lldb-dev mailing list
> lldb-dev at lists.llvm.org
> https://lists.llvm.org/cgi-bin/mailman/listinfo/lldb-dev
>


-- 
Omair Javaid
www.linaro.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.llvm.org/pipermail/lldb-dev/attachments/20200813/20379fdf/attachment-0001.html>