[lldb-dev] Resuming traced process on Linux and SIGSTOP

[Andrew MacPherson]

Great, thanks Jim. I take it that patch is ok to apply then?


On Fri, Mar 21, 2014 at 7:59 PM, <jingham at apple.com> wrote:

> Indeed, setting the resume signal explicitly on the thread on stop was not
> the right thing to do.  You don't want to clear the thread's resume signal
> out in Thread::ShouldStop because somebody might be trying to resume the
> thread with a hand-provided signal, and you wouldn't want to interrupt
> that.  But the thread itself should let the StopInfo carry the stop signal
> information.
>
> Jim
>
> On Mar 21, 2014, at 11:35 AM, Andrew MacPherson <andrew.macp at gmail.com>
> wrote:
>
> > Actually it looks like those calls may be redundant now as it's being
> handled by StopInfo. This patch gets attach resume/interrupt working for me
> on Linux.
> >
> >
> > On Fri, Mar 21, 2014 at 7:21 PM, Andrew MacPherson <
> andrew.macp at gmail.com> wrote:
> > Thanks Jim, LinuxSignals.cpp had SIGSTOP marked as suppress = false
> unlike UnixSignals.cpp which had it correctly marked suppress = true. With
> that fixed though the SIGSTOP is still getting set due to the call to
> SetResumeSignal() in POSIXThread::SignalDeliveredNotify() it looks like.
> Should this code also be using the signals table to decide whether to
> suppress it?
> >
> > Thanks again.
> >
> >
> >
> > On Fri, Mar 21, 2014 at 6:58 PM, <jingham at apple.com> wrote:
> > Sorry, that's StopInfoSignal::WillResume.
> >
> > Jim
> >
> > On Mar 21, 2014, at 10:54 AM, jingham at apple.com wrote:
> >
> > > Somebody is not paying attention to the "process handle" settings.
>  Normally SIGSTOP is set not to pass:
> > >
> > > (lldb) process handle SIGSTOP
> > > NAME        PASS   STOP   NOTIFY
> > > ==========  =====  =====  ======
> > > SIGSTOP     false  true   true
> > >
> > > This check should be done in Process::WillResume:
> > >
> > >    virtual void
> > >    WillResume (lldb::StateType resume_state)
> > >    {
> > >        ThreadSP thread_sp (m_thread_wp.lock());
> > >        if (thread_sp)
> > >        {
> > >            if
> (thread_sp->GetProcess()->GetUnixSignals().GetShouldSuppress(m_value) ==
> false)
> > >                thread_sp->SetResumeSignal(m_value);
> > >        }
> > >    }
> > >
> > > I wonder why this isn't happening in your case?
> > >
> > > Jim
> > >
> > >
> > > On Mar 21, 2014, at 10:46 AM, Andrew MacPherson <andrew.macp at gmail.com>
> wrote:
> > >
> > >> Currently when attaching to a running process on Linux, a SIGSTOP
> signal is (incorrectly I think) injected into the inferior on resume. This
> can be reproduced by simply launching any process and then in a separate
> terminal doing:
> > >>
> > >> sudo lldb -p <pid>
> > >> c
> > >> process interrupt
> > >> c
> > >>
> > >> On the second continue the SIGSTOP that was used to stop the process
> is injected into the inferior by being passed to PTRACE_CONT, resulting in
> the process going into a stop state outside the control of LLDB. The
> SIGSTOP comes from the SetResumeSignal() call in POSIXThread and StopInfo.
> > >>
> > >> I can't think of any reason why a SIGSTOP should ever be injected
> into the inferior so as a test I simply prevented it from ever happening:
> > >>
> > >> diff --git a/source/Plugins/Process/Linux/ProcessMonitor.cpp
> b/source/Plugins/Process/Linux/ProcessMonitor.cpp
> > >> index 3dec6de..3079379 100644
> > >> --- a/source/Plugins/Process/Linux/ProcessMonitor.cpp
> > >> +++ b/source/Plugins/Process/Linux/ProcessMonitor.cpp
> > >> @@ -2209,6 +2209,9 @@ ProcessMonitor::Resume(lldb::tid_t tid,
> uint32_t signo)
> > >>     bool result;
> > >>     Log *log (ProcessPOSIXLog::GetLogIfAllCategoriesSet
> (POSIX_LOG_PROCESS));
> > >>
> > >> +    if (signo == SIGSTOP)
> > >> +      signo = eResumeSignalNone;
> > >> +
> > >>     if (log)
> > >>         log->Printf ("ProcessMonitor::%s() resuming thread = %"
>  PRIu64 " with signal %s", __FUNCTION__, tid,
> > >>
>  m_process->GetUnixSignals().GetSignalAsCString (signo));
> > >>
> > >> This resolves the issue and doesn't cause any other problems that I
> can find but almost certainly isn't the proper fix. My main concern is that
> all of the resume signal code is shared with other OSes which I'm guessing
> treat this differently.
> > >>
> > >> Any thoughts as to what the proper fix here might be?
> > >>
> > >> Thanks,
> > >> Andrew
> > >> _______________________________________________
> > >> lldb-dev mailing list
> > >> lldb-dev at cs.uiuc.edu
> > >> http://lists.cs.uiuc.edu/mailman/listinfo/lldb-dev
> > >
> > > _______________________________________________
> > > lldb-dev mailing list
> > > lldb-dev at cs.uiuc.edu
> > > http://lists.cs.uiuc.edu/mailman/listinfo/lldb-dev
> >
> >
> >
> > <SIGSTOP-resume.patch>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.llvm.org/pipermail/lldb-dev/attachments/20140321/ac42f7aa/attachment.html>