[lldb-dev] run after process stop using python API

[Langmuir, Ben]

Is there documentation for DispatchInput somewhere? There are no comments in SBDebugger.h about it, and none of the examples seem to use it.  What is the difference between DispatchInput and HandleCommand?

Ben

> -----Original Message-----
> From: filcab at gmail.com [mailto:filcab at gmail.com] On Behalf Of Filipe
> Cabecinhas
> Sent: Thursday, June 27, 2013 2:26 PM
> To: Langmuir, Ben
> Cc: Enrico Granata; lldb-dev at cs.uiuc.edu
> Subject: Re: [lldb-dev] run after process stop using python API
> 
> Hi Ben,
> 
> The problem you seem to be having is not taking into account the output of
> the debugger.
> When you send the “run” command, it pushes an InputReader (I think) and
> asks you if you're sure you want to continue.
> If you take this into account, you can print that message on your user's
> console, and the DispatchInput() with the reply. Could you try that and see if
> it works?
> If it doesn't work, you may find it necessary to do something like the driver
> does, where you give the debugger an stdin and stdout and use those for all
> input/output from/to the debugger itself.
> 
> Your UI over lldb should always try to use the SB* API, and never
> HandleCommand (except for direct user input, but even then, DispatchInput
> or the debugger's stdin should be possible to use, so you don't need more
> than one input path).
> 
> Regards,
> 
>   Filipe
> 
> 
> On Thu, Jun 27, 2013 at 5:40 AM, Langmuir, Ben <ben.langmuir at intel.com>
> wrote:
> > Just being able to re-run the target at any (reasonable) point.  I’m
> > working on a frontend for lldb using the python api, and I’m using the
> > command interpreter to deal with user input.
> >
> >
> >
> > Thanks,
> >
> >
> >
> > Ben
> >
> >
> >
> > From: Enrico Granata [mailto:egranata at apple.com]
> > Sent: Wednesday, June 26, 2013 5:15 PM
> > To: Langmuir, Ben
> > Cc: Malea, Daniel; lldb-dev at cs.uiuc.edu
> >
> >
> > Subject: Re: [lldb-dev] run after process stop using python API
> >
> >
> >
> > $ ./lldb /bin/ls
> >
> > Current executable set to '/bin/ls' (x86_64).
> >
> > (lldb) sett set auto-confirm true
> >
> > (lldb) b malloc
> >
> > Breakpoint 1: 2 locations.
> >
> > (lldb) r
> >
> > Process 48551 launched: '/bin/ls' (x86_64)
> >
> > Process 48551 stopped
> >
> > * thread #1: tid = 0x5edda, 0x00007fff906cd8f9
> > libsystem_malloc.dylib`malloc, stop reason = breakpoint 1.2
> >
> >     frame #0: 0x00007fff906cd8f9 libsystem_malloc.dylib`malloc
> >
> > libsystem_malloc.dylib`malloc:
> >
> > -> 0x7fff906cd8f9:  pushq  %rbp
> >
> >    0x7fff906cd8fa:  movq   %rsp, %rbp
> >
> >    0x7fff906cd8fd:  pushq  %rbx
> >
> >    0x7fff906cd8fe:  pushq  %rax
> >
> > (lldb) r
> >
> > Process 48554 launched: '/bin/ls' (x86_64)
> >
> > Process 48554 stopped
> >
> > * thread #1: tid = 0x5edf2, 0x00007fff906cd8f9
> > libsystem_malloc.dylib`malloc, stop reason = breakpoint 1.2
> >
> >     frame #0: 0x00007fff906cd8f9 libsystem_malloc.dylib`malloc
> >
> > libsystem_malloc.dylib`malloc:
> >
> > -> 0x7fff906cd8f9:  pushq  %rbp
> >
> >    0x7fff906cd8fa:  movq   %rsp, %rbp
> >
> >    0x7fff906cd8fd:  pushq  %rbx
> >
> >    0x7fff906cd8fe:  pushq  %rax
> >
> >
> >
> > You want to set the auto-confirm lldb setting to true before you issue
> > the second run
> >
> >
> >
> > What exactly are you trying to achieve, if you can discuss it?
> >
> >
> >
> > Enrico Granata
> > 📩 egranata@.com
> > ☎️ 27683
> >
> >
> >
> > On Jun 26, 2013, at 2:10 PM, Langmuir, Ben <ben.langmuir at intel.com>
> wrote:
> >
> >
> >
> > How do I turn off the prompt setting?
> >
> > Also, continue isn’t what I want – I really do want to re-run the
> > program from the start.
> >
> >
> >
> > Ben
> >
> >
> >
> > From: Malea, Daniel
> > Sent: Wednesday, June 26, 2013 5:08 PM
> > To: Langmuir, Ben; lldb-dev at cs.uiuc.edu
> > Subject: Re: [lldb-dev] run after process stop using python API
> >
> >
> >
> > 'run' is a GDB alias for process launch. If a process is already
> > running, the command interpreter may be waiting for confirmation from
> > the user that it's OK to restart the process (unless you turned off
> > the prompt setting beforehand)... You probably want to issue a
> > "continue" command to restart the process.
> >
> >
> >
> >
> >
> > Cheers,
> >
> > Dan
> >
> >
> >
> > From: <Langmuir>, Ben Langmuir <ben.langmuir at intel.com>
> > Date: Wednesday, 26 June, 2013 4:57 PM
> > To: "lldb-dev at cs.uiuc.edu" <lldb-dev at cs.uiuc.edu>
> > Subject: [lldb-dev] run after process stop using python API
> >
> >
> >
> > I’m trying to use the ‘run’ command from the python API when my
> > process has stopped at a breakpoint, but it appears to hang.  Script
> attached.
> >
> >
> >
> > i.HandleCommand('b main', res)
> >
> > i.HandleCommand('r', res) -> runs to breakpoint correctly
> >
> > i.HandleCommand('r', res) -> appears to hang
> >
> >
> >
> > This seems like a bug, but I thought I would ask in case the
> > interpreter was waiting for some kind of input I wasn’t providing…
> > I’m running on Linux, and haven’t had a chance to try OS X yet.
> >
> >
> >
> > Ben
> >
> > _______________________________________________
> > lldb-dev mailing list
> > lldb-dev at cs.uiuc.edu
> > http://lists.cs.uiuc.edu/mailman/listinfo/lldb-dev
> >
> >
> >
> >
> > _______________________________________________
> > lldb-dev mailing list
> > lldb-dev at cs.uiuc.edu
> > http://lists.cs.uiuc.edu/mailman/listinfo/lldb-dev
> >