[Lldb-commits] [lldb] [lldb] Improve mid-function epilogue scanning for x86 (PR #110965)
via lldb-commits
lldb-commits at lists.llvm.org
Thu Oct 3 00:08:08 PDT 2024
llvmbot wrote:
<!--LLVM PR SUMMARY COMMENT-->
@llvm/pr-subscribers-lldb
Author: Jason Molenda (jasonmolenda)
<details>
<summary>Changes</summary>
The x86 assembly instruction scanner creates incorrect UnwindPlans when a mid-function epilogue has a non-epilogue instruction in it.
The x86 instruction analysis which creates an UnwindPlan handles mid-function epilogues by tracking "epilogue instructions" (register loads from stack, stack pointer increasing, etc) and any UnwindPlan updates which are NOT epilogue instructions update the "prologue UnwindPlan" saved row. It detects a LEAVE/RET/unconditional JMP out of the function and after that instruction, re-instates the "prologue Row".
There's a parallel piece of data tracked across the duration of the function, current_sp_bytes_offset_from_fa, and we reflect the "value after prologue instructions" in prologue_completed_sp_bytes_offset_from_cfa. When the CFA is calculated in terms of the frame pointer ($ebp/$rbp), we don't add changes to the stack pointer to the UnwindPlan, so this separate mechanism is used for the "current value" and the "last value at prologue setup".
(the x86 UnwindPlan generated writes "sp=CFA+0" as a register rule which is formally correct, but it could also track the stack pointer value as sp=$rsp+<x> and update this register rule every time $rsp is modified.)
This leads to a bug when there is an instruction in an epilogue which isn't recognzied as an epilogue instruction. prologue_completed_sp_bytes_offset_from_cfa is always set to the value of current_sp_bytes_offset_from_fa unless the current instruction is an epilogue instruction. With a non-epilogue instruction in the middle of the epilogue, we suddenly copy a current_sp_bytes_offset_from_fa value from the middle of the epilogue into this
prologue_completed_sp_bytes_offset_from_cfa. Once the epilogue is finished, we restore the "prologue Row" and
prologue_completed_sp_bytes_offset_from_cfa. But now $rsp has a very incorrect value in it.
This patch tracks when we've updated current_sp_bytes_offset_from_fa in the current instruction analysis. If it was updated looking at an epilogue instruction, `is_epilogue` will be set correctly. Otherwise it's a "prologue" instruction and we should update prologue_completed_sp_bytes_offset_from_cfa. Any instruction that is unrecognized will leave prologue_completed_sp_bytes_offset_from_cfa unmodified.
The actual instruction we hit this with was a BTRQ but I added a NOP to the unit test which is only 1 byte and made the update to the unit test a little simpler. This bug is hit with a NOP just as well.
UnwindAssemblyInstEmulation has a much better algorithm for handling mid-function epilogues, which "forward" the current unwind state Row when it sees branches within the function, to the target instruction offset. This avoids detecting prologue/epilogue instructions altogether.
rdar://137153323
---
Full diff: https://github.com/llvm/llvm-project/pull/110965.diff
2 Files Affected:
- (modified) lldb/source/Plugins/UnwindAssembly/x86/x86AssemblyInspectionEngine.cpp (+22-4)
- (modified) lldb/unittests/UnwindAssembly/x86/Testx86AssemblyInspectionEngine.cpp (+15-14)
``````````diff
diff --git a/lldb/source/Plugins/UnwindAssembly/x86/x86AssemblyInspectionEngine.cpp b/lldb/source/Plugins/UnwindAssembly/x86/x86AssemblyInspectionEngine.cpp
index 81b7f138fe7caa..45d2f95433d5bb 100644
--- a/lldb/source/Plugins/UnwindAssembly/x86/x86AssemblyInspectionEngine.cpp
+++ b/lldb/source/Plugins/UnwindAssembly/x86/x86AssemblyInspectionEngine.cpp
@@ -809,7 +809,7 @@ bool x86AssemblyInspectionEngine::local_branch_p (
// Branch target is before the start of this function
return false;
}
- if (offset + next_pc_value > func_range.GetByteSize()) {
+ if (offset + next_pc_value >= func_range.GetByteSize()) {
// Branch targets outside this function's bounds
return false;
}
@@ -967,6 +967,8 @@ bool x86AssemblyInspectionEngine::GetNonCallSiteUnwindPlanFromAssembly(
bool in_epilogue = false; // we're in the middle of an epilogue sequence
bool row_updated = false; // The UnwindPlan::Row 'row' has been updated
+ bool current_sp_offset_updated =
+ false; // current_sp_bytes_offset_from_fa has been updated this insn
m_cur_insn = data + current_func_text_offset;
if (!instruction_length(m_cur_insn, insn_len, size - current_func_text_offset)
@@ -1013,8 +1015,10 @@ bool x86AssemblyInspectionEngine::GetNonCallSiteUnwindPlanFromAssembly(
afa_value.SetUnspecified();
row_updated = true;
}
- if (fa_value_ptr->GetRegisterNumber() == m_lldb_fp_regnum)
+ if (fa_value_ptr->GetRegisterNumber() == m_lldb_fp_regnum) {
current_sp_bytes_offset_from_fa = fa_value_ptr->GetOffset();
+ current_sp_offset_updated = true;
+ }
}
else if (mov_rbx_rsp_pattern_p()) {
@@ -1025,8 +1029,10 @@ bool x86AssemblyInspectionEngine::GetNonCallSiteUnwindPlanFromAssembly(
afa_value.SetUnspecified();
row_updated = true;
}
- if (fa_value_ptr->GetRegisterNumber() == m_lldb_alt_fp_regnum)
+ if (fa_value_ptr->GetRegisterNumber() == m_lldb_alt_fp_regnum) {
current_sp_bytes_offset_from_fa = fa_value_ptr->GetOffset();
+ current_sp_offset_updated = true;
+ }
}
// This is the start() function (or a pthread equivalent), it starts with a
@@ -1039,6 +1045,7 @@ bool x86AssemblyInspectionEngine::GetNonCallSiteUnwindPlanFromAssembly(
else if (push_reg_p(machine_regno)) {
current_sp_bytes_offset_from_fa += m_wordsize;
+ current_sp_offset_updated = true;
// the PUSH instruction has moved the stack pointer - if the FA is set
// in terms of the stack pointer, we need to add a new row of
// instructions.
@@ -1064,6 +1071,7 @@ bool x86AssemblyInspectionEngine::GetNonCallSiteUnwindPlanFromAssembly(
else if (pop_reg_p(machine_regno)) {
current_sp_bytes_offset_from_fa -= m_wordsize;
+ current_sp_offset_updated = true;
if (nonvolatile_reg_p(machine_regno) &&
machine_regno_to_lldb_regno(machine_regno, lldb_regno) &&
@@ -1091,6 +1099,7 @@ bool x86AssemblyInspectionEngine::GetNonCallSiteUnwindPlanFromAssembly(
else if (pop_misc_reg_p()) {
current_sp_bytes_offset_from_fa -= m_wordsize;
+ current_sp_offset_updated = true;
if (fa_value_ptr->GetRegisterNumber() == m_lldb_sp_regnum) {
fa_value_ptr->SetIsRegisterPlusOffset(
m_lldb_sp_regnum, current_sp_bytes_offset_from_fa);
@@ -1126,6 +1135,7 @@ bool x86AssemblyInspectionEngine::GetNonCallSiteUnwindPlanFromAssembly(
}
current_sp_bytes_offset_from_fa -= m_wordsize;
+ current_sp_offset_updated = true;
if (fa_value_ptr->GetRegisterNumber() == m_lldb_sp_regnum) {
fa_value_ptr->SetIsRegisterPlusOffset(
@@ -1161,6 +1171,7 @@ bool x86AssemblyInspectionEngine::GetNonCallSiteUnwindPlanFromAssembly(
else if (sub_rsp_pattern_p(stack_offset)) {
current_sp_bytes_offset_from_fa += stack_offset;
+ current_sp_offset_updated = true;
if (fa_value_ptr->GetRegisterNumber() == m_lldb_sp_regnum) {
fa_value_ptr->SetOffset(current_sp_bytes_offset_from_fa);
row_updated = true;
@@ -1169,6 +1180,7 @@ bool x86AssemblyInspectionEngine::GetNonCallSiteUnwindPlanFromAssembly(
else if (add_rsp_pattern_p(stack_offset)) {
current_sp_bytes_offset_from_fa -= stack_offset;
+ current_sp_offset_updated = true;
if (fa_value_ptr->GetRegisterNumber() == m_lldb_sp_regnum) {
fa_value_ptr->SetOffset(current_sp_bytes_offset_from_fa);
row_updated = true;
@@ -1179,6 +1191,7 @@ bool x86AssemblyInspectionEngine::GetNonCallSiteUnwindPlanFromAssembly(
else if (push_extended_pattern_p() || push_imm_pattern_p() ||
push_misc_reg_p()) {
current_sp_bytes_offset_from_fa += m_wordsize;
+ current_sp_offset_updated = true;
if (fa_value_ptr->GetRegisterNumber() == m_lldb_sp_regnum) {
fa_value_ptr->SetOffset(current_sp_bytes_offset_from_fa);
row_updated = true;
@@ -1187,6 +1200,7 @@ bool x86AssemblyInspectionEngine::GetNonCallSiteUnwindPlanFromAssembly(
else if (lea_rsp_pattern_p(stack_offset)) {
current_sp_bytes_offset_from_fa -= stack_offset;
+ current_sp_offset_updated = true;
if (fa_value_ptr->GetRegisterNumber() == m_lldb_sp_regnum) {
fa_value_ptr->SetOffset(current_sp_bytes_offset_from_fa);
row_updated = true;
@@ -1206,6 +1220,7 @@ bool x86AssemblyInspectionEngine::GetNonCallSiteUnwindPlanFromAssembly(
if (fa_value_ptr->GetRegisterNumber() == m_lldb_fp_regnum) {
current_sp_bytes_offset_from_fa =
fa_value_ptr->GetOffset() - stack_offset;
+ current_sp_offset_updated = true;
}
}
@@ -1219,6 +1234,7 @@ bool x86AssemblyInspectionEngine::GetNonCallSiteUnwindPlanFromAssembly(
}
if (fa_value_ptr->GetRegisterNumber() == m_lldb_alt_fp_regnum) {
current_sp_bytes_offset_from_fa = fa_value_ptr->GetOffset() - stack_offset;
+ current_sp_offset_updated = true;
}
}
@@ -1251,6 +1267,7 @@ bool x86AssemblyInspectionEngine::GetNonCallSiteUnwindPlanFromAssembly(
row.reset(newrow);
current_sp_bytes_offset_from_fa =
prologue_completed_sp_bytes_offset_from_cfa;
+ current_sp_offset_updated = true;
is_aligned = prologue_completed_is_aligned;
saved_registers.clear();
@@ -1272,6 +1289,7 @@ bool x86AssemblyInspectionEngine::GetNonCallSiteUnwindPlanFromAssembly(
// global data
else if (call_next_insn_pattern_p()) {
current_sp_bytes_offset_from_fa += m_wordsize;
+ current_sp_offset_updated = true;
if (fa_value_ptr->GetRegisterNumber() == m_lldb_sp_regnum) {
fa_value_ptr->SetOffset(current_sp_bytes_offset_from_fa);
row_updated = true;
@@ -1304,7 +1322,7 @@ bool x86AssemblyInspectionEngine::GetNonCallSiteUnwindPlanFromAssembly(
// We may change the sp value without adding a new Row necessarily -- keep
// track of it either way.
- if (!in_epilogue) {
+ if (!in_epilogue && current_sp_offset_updated) {
prologue_completed_sp_bytes_offset_from_cfa =
current_sp_bytes_offset_from_fa;
prologue_completed_is_aligned = is_aligned;
diff --git a/lldb/unittests/UnwindAssembly/x86/Testx86AssemblyInspectionEngine.cpp b/lldb/unittests/UnwindAssembly/x86/Testx86AssemblyInspectionEngine.cpp
index 3ff57b4f97f178..f5bb3b6d642362 100644
--- a/lldb/unittests/UnwindAssembly/x86/Testx86AssemblyInspectionEngine.cpp
+++ b/lldb/unittests/UnwindAssembly/x86/Testx86AssemblyInspectionEngine.cpp
@@ -2859,16 +2859,17 @@ TEST_F(Testx86AssemblyInspectionEngine, TestDisassemblyMidFunctionEpilogues) {
0x90, // <+18>: nop // prologue setup back
- 0x74, 0x7, // <+19>: je 6 <+27>
+ 0x74, 0x8, // <+19>: je 7 <+28>
0x48, 0x83, 0xc4, 0x70, // <+21>: addq $0x70, %rsp
0x5d, // <+25>: popq %rbp
- 0xc3, // <+26>: retq // epilogue completed
+ 0x90, // <+26>: nop // mid-epilogue non-epilogue
+ 0xc3, // <+27>: retq // epilogue completed
- 0x90, // <+27>: nop // prologue setup back
+ 0x90, // <+28>: nop // prologue setup back
- 0x48, 0x83, 0xc4, 0x70, // <+28>: addq $0x70, %rsp
- 0x5d, // <+32>: popq %rbp
- 0xc3, // <+33>: retq // epilogue completed
+ 0x48, 0x83, 0xc4, 0x70, // <+29>: addq $0x70, %rsp
+ 0x5d, // <+33>: popq %rbp
+ 0xc3, // <+34>: retq // epilogue completed
};
@@ -2898,8 +2899,8 @@ TEST_F(Testx86AssemblyInspectionEngine, TestDisassemblyMidFunctionEpilogues) {
// Check that we've reinstated the stack frame setup
// unwind instructions after a mid-function retq
// row: CFA=ebp +8 => esp=CFA+0 eip=[CFA-8]
- row_sp = unwind_plan.GetRowForFunctionOffset(27);
- EXPECT_EQ(27ull, row_sp->GetOffset());
+ row_sp = unwind_plan.GetRowForFunctionOffset(28);
+ EXPECT_EQ(28ull, row_sp->GetOffset());
EXPECT_TRUE(row_sp->GetCFAValue().GetRegisterNumber() == k_ebp);
EXPECT_TRUE(row_sp->GetCFAValue().IsRegisterPlusOffset() == true);
EXPECT_EQ(wordsize * 2, row_sp->GetCFAValue().GetOffset());
@@ -2907,8 +2908,8 @@ TEST_F(Testx86AssemblyInspectionEngine, TestDisassemblyMidFunctionEpilogues) {
// After last instruction in the function, verify that
// the stack frame has been unwound
// row: CFA=esp +4 => esp=CFA+0 eip=[CFA-4]
- row_sp = unwind_plan.GetRowForFunctionOffset(33);
- EXPECT_EQ(33ull, row_sp->GetOffset());
+ row_sp = unwind_plan.GetRowForFunctionOffset(34);
+ EXPECT_EQ(34ull, row_sp->GetOffset());
EXPECT_TRUE(row_sp->GetCFAValue().GetRegisterNumber() == k_esp);
EXPECT_TRUE(row_sp->GetCFAValue().IsRegisterPlusOffset() == true);
EXPECT_EQ(wordsize, row_sp->GetCFAValue().GetOffset());
@@ -2940,8 +2941,8 @@ TEST_F(Testx86AssemblyInspectionEngine, TestDisassemblyMidFunctionEpilogues) {
// Check that we've reinstated the stack frame setup
// unwind instructions after a mid-function retq
// row: CFA=rbp+16 => rsp=CFA+0 rip=[CFA-16]
- row_sp = unwind_plan.GetRowForFunctionOffset(27);
- EXPECT_EQ(27ull, row_sp->GetOffset());
+ row_sp = unwind_plan.GetRowForFunctionOffset(28);
+ EXPECT_EQ(28ull, row_sp->GetOffset());
EXPECT_TRUE(row_sp->GetCFAValue().GetRegisterNumber() == k_rbp);
EXPECT_TRUE(row_sp->GetCFAValue().IsRegisterPlusOffset() == true);
EXPECT_EQ(wordsize * 2, row_sp->GetCFAValue().GetOffset());
@@ -2949,8 +2950,8 @@ TEST_F(Testx86AssemblyInspectionEngine, TestDisassemblyMidFunctionEpilogues) {
// After last instruction in the function, verify that
// the stack frame has been unwound
// row: CFA=rsp +8 => esp=CFA+0 rip=[CFA-8]
- row_sp = unwind_plan.GetRowForFunctionOffset(33);
- EXPECT_EQ(33ull, row_sp->GetOffset());
+ row_sp = unwind_plan.GetRowForFunctionOffset(34);
+ EXPECT_EQ(34ull, row_sp->GetOffset());
EXPECT_TRUE(row_sp->GetCFAValue().GetRegisterNumber() == k_rsp);
EXPECT_TRUE(row_sp->GetCFAValue().IsRegisterPlusOffset() == true);
EXPECT_EQ(wordsize, row_sp->GetCFAValue().GetOffset());
``````````
</details>
https://github.com/llvm/llvm-project/pull/110965
More information about the lldb-commits
mailing list