[Lldb-commits] [lldb] LLDB Debuginfod tests and a fix or two (PR #90622)
via lldb-commits
lldb-commits at lists.llvm.org
Tue Apr 30 09:52:10 PDT 2024
llvmbot wrote:
<!--LLVM PR SUMMARY COMMENT-->
@llvm/pr-subscribers-lldb
Author: Kevin Frei (kevinfrei)
<details>
<summary>Changes</summary>
I'm taking yet another swing at getting these tests going, on the hypothesis that the problems with buildbots & whatnot are because they're not configured with CURL support, which I've confirmed would cause the previous tests to fail. (I have no access to an ARM64 linux system, but I did repro the failure on MacOS configured without CURL support)
So, the only difference between this diff and [previous](https://github.com/llvm/llvm-project/pull/85693) [diffs](https://github.com/llvm/llvm-project/pull/87676) that have already been approved is that I've added a condition to the tests to only run if Debuginfod capabilities should be built into the binary. I had done this for these tests when they were [Shell tests](https://github.com/llvm/llvm-project/pull/79181) and not API tests, but I couldn't find a direct analog in any API test, so I used the "plugins" model used by the intel-pt tests as well.
---
Patch is 26.05 KiB, truncated to 20.00 KiB below, full version: https://github.com/llvm/llvm-project/pull/90622.diff
12 Files Affected:
- (modified) lldb/packages/Python/lldbsuite/test/make/Makefile.rules (+25-1)
- (modified) lldb/source/Plugins/SymbolFile/DWARF/SymbolFileDWARF.cpp (+25-13)
- (modified) lldb/source/Plugins/SymbolLocator/CMakeLists.txt (+6-1)
- (modified) lldb/source/Plugins/SymbolVendor/ELF/SymbolVendorELF.cpp (+27-2)
- (added) lldb/test/API/debuginfod/Normal/Makefile (+19)
- (added) lldb/test/API/debuginfod/Normal/TestDebuginfod.py (+183)
- (added) lldb/test/API/debuginfod/Normal/main.c (+7)
- (added) lldb/test/API/debuginfod/SplitDWARF/Makefile (+23)
- (added) lldb/test/API/debuginfod/SplitDWARF/TestDebuginfodDWP.py (+192)
- (added) lldb/test/API/debuginfod/SplitDWARF/main.c (+7)
- (modified) lldb/test/API/lit.site.cfg.py.in (+4)
- (modified) lldb/test/CMakeLists.txt (+1)
``````````diff
diff --git a/lldb/packages/Python/lldbsuite/test/make/Makefile.rules b/lldb/packages/Python/lldbsuite/test/make/Makefile.rules
index bfd249ccd43f2e..ee8793fa1b3029 100644
--- a/lldb/packages/Python/lldbsuite/test/make/Makefile.rules
+++ b/lldb/packages/Python/lldbsuite/test/make/Makefile.rules
@@ -51,7 +51,7 @@ LLDB_BASE_DIR := $(THIS_FILE_DIR)/../../../../../
#
# GNUWin32 uname gives "windows32" or "server version windows32" while
# some versions of MSYS uname return "MSYS_NT*", but most environments
-# standardize on "Windows_NT", so we'll make it consistent here.
+# standardize on "Windows_NT", so we'll make it consistent here.
# When running tests from Visual Studio, the environment variable isn't
# inherited all the way down to the process spawned for make.
#----------------------------------------------------------------------
@@ -210,6 +210,12 @@ else
ifeq "$(SPLIT_DEBUG_SYMBOLS)" "YES"
DSYM = $(EXE).debug
endif
+
+ ifeq "$(MAKE_DWP)" "YES"
+ MAKE_DWO := YES
+ DWP_NAME = $(EXE).dwp
+ DYLIB_DWP_NAME = $(DYLIB_NAME).dwp
+ endif
endif
LIMIT_DEBUG_INFO_FLAGS =
@@ -357,6 +363,7 @@ ifneq "$(OS)" "Darwin"
OBJCOPY ?= $(call replace_cc_with,objcopy)
ARCHIVER ?= $(call replace_cc_with,ar)
+ DWP ?= $(call replace_cc_with,dwp)
override AR = $(ARCHIVER)
endif
@@ -527,6 +534,10 @@ ifneq "$(CXX)" ""
endif
endif
+ifeq "$(GEN_GNU_BUILD_ID)" "YES"
+ LDFLAGS += -Wl,--build-id
+endif
+
#----------------------------------------------------------------------
# DYLIB_ONLY variable can be used to skip the building of a.out.
# See the sections below regarding dSYM file as well as the building of
@@ -565,10 +576,17 @@ else
endif
else
ifeq "$(SPLIT_DEBUG_SYMBOLS)" "YES"
+ifeq "$(SAVE_FULL_DEBUG_BINARY)" "YES"
+ cp "$(EXE)" "$(EXE).unstripped"
+endif
$(OBJCOPY) --only-keep-debug "$(EXE)" "$(DSYM)"
$(OBJCOPY) --strip-debug --add-gnu-debuglink="$(DSYM)" "$(EXE)" "$(EXE)"
endif
+ifeq "$(MAKE_DWP)" "YES"
+ $(DWP) -o "$(DWP_NAME)" $(DWOS)
endif
+endif
+
#----------------------------------------------------------------------
# Make the dylib
@@ -610,9 +628,15 @@ endif
else
$(LD) $(DYLIB_OBJECTS) $(LDFLAGS) -shared -o "$(DYLIB_FILENAME)"
ifeq "$(SPLIT_DEBUG_SYMBOLS)" "YES"
+ ifeq "$(SAVE_FULL_DEBUG_BINARY)" "YES"
+ cp "$(DYLIB_FILENAME)" "$(DYLIB_FILENAME).unstripped"
+ endif
$(OBJCOPY) --only-keep-debug "$(DYLIB_FILENAME)" "$(DYLIB_FILENAME).debug"
$(OBJCOPY) --strip-debug --add-gnu-debuglink="$(DYLIB_FILENAME).debug" "$(DYLIB_FILENAME)" "$(DYLIB_FILENAME)"
endif
+ifeq "$(MAKE_DWP)" "YES"
+ $(DWP) -o $(DYLIB_DWP_FILE) $(DYLIB_DWOS)
+endif
endif
#----------------------------------------------------------------------
diff --git a/lldb/source/Plugins/SymbolFile/DWARF/SymbolFileDWARF.cpp b/lldb/source/Plugins/SymbolFile/DWARF/SymbolFileDWARF.cpp
index 49f13d2c89e380..dafdf241f9db0c 100644
--- a/lldb/source/Plugins/SymbolFile/DWARF/SymbolFileDWARF.cpp
+++ b/lldb/source/Plugins/SymbolFile/DWARF/SymbolFileDWARF.cpp
@@ -4378,26 +4378,38 @@ const std::shared_ptr<SymbolFileDWARFDwo> &SymbolFileDWARF::GetDwpSymbolFile() {
FileSpecList search_paths = Target::GetDefaultDebugFileSearchPaths();
ModuleSpec module_spec;
module_spec.GetFileSpec() = m_objfile_sp->GetFileSpec();
+ FileSpec dwp_filespec;
for (const auto &symfile : symfiles.files()) {
module_spec.GetSymbolFileSpec() =
FileSpec(symfile.GetPath() + ".dwp", symfile.GetPathStyle());
LLDB_LOG(log, "Searching for DWP using: \"{0}\"",
module_spec.GetSymbolFileSpec());
- FileSpec dwp_filespec =
+ dwp_filespec =
PluginManager::LocateExecutableSymbolFile(module_spec, search_paths);
if (FileSystem::Instance().Exists(dwp_filespec)) {
- LLDB_LOG(log, "Found DWP file: \"{0}\"", dwp_filespec);
- DataBufferSP dwp_file_data_sp;
- lldb::offset_t dwp_file_data_offset = 0;
- ObjectFileSP dwp_obj_file = ObjectFile::FindPlugin(
- GetObjectFile()->GetModule(), &dwp_filespec, 0,
- FileSystem::Instance().GetByteSize(dwp_filespec), dwp_file_data_sp,
- dwp_file_data_offset);
- if (dwp_obj_file) {
- m_dwp_symfile = std::make_shared<SymbolFileDWARFDwo>(
- *this, dwp_obj_file, DIERef::k_file_index_mask);
- break;
- }
+ break;
+ }
+ }
+ if (!FileSystem::Instance().Exists(dwp_filespec)) {
+ LLDB_LOG(log, "No DWP file found locally");
+ // Fill in the UUID for the module we're trying to match for, so we can
+ // find the correct DWP file, as the Debuginfod plugin uses *only* this
+ // data to correctly match the DWP file with the binary.
+ module_spec.GetUUID() = m_objfile_sp->GetUUID();
+ dwp_filespec =
+ PluginManager::LocateExecutableSymbolFile(module_spec, search_paths);
+ }
+ if (FileSystem::Instance().Exists(dwp_filespec)) {
+ LLDB_LOG(log, "Found DWP file: \"{0}\"", dwp_filespec);
+ DataBufferSP dwp_file_data_sp;
+ lldb::offset_t dwp_file_data_offset = 0;
+ ObjectFileSP dwp_obj_file = ObjectFile::FindPlugin(
+ GetObjectFile()->GetModule(), &dwp_filespec, 0,
+ FileSystem::Instance().GetByteSize(dwp_filespec), dwp_file_data_sp,
+ dwp_file_data_offset);
+ if (dwp_obj_file) {
+ m_dwp_symfile = std::make_shared<SymbolFileDWARFDwo>(
+ *this, dwp_obj_file, DIERef::k_file_index_mask);
}
}
if (!m_dwp_symfile) {
diff --git a/lldb/source/Plugins/SymbolLocator/CMakeLists.txt b/lldb/source/Plugins/SymbolLocator/CMakeLists.txt
index ca969626f4ffc4..3367022639ab85 100644
--- a/lldb/source/Plugins/SymbolLocator/CMakeLists.txt
+++ b/lldb/source/Plugins/SymbolLocator/CMakeLists.txt
@@ -1,5 +1,10 @@
+# Order matters here: the first symbol locator prevents further searching.
+# For DWARF binaries that are both stripped and split, the Default plugin
+# will return the stripped binary when asked for the ObjectFile, which then
+# prevents an unstripped binary from being requested from the Debuginfod
+# provider.
+add_subdirectory(Debuginfod)
add_subdirectory(Default)
if (CMAKE_SYSTEM_NAME MATCHES "Darwin")
add_subdirectory(DebugSymbols)
endif()
-add_subdirectory(Debuginfod)
diff --git a/lldb/source/Plugins/SymbolVendor/ELF/SymbolVendorELF.cpp b/lldb/source/Plugins/SymbolVendor/ELF/SymbolVendorELF.cpp
index b5fe35d71032a8..f296e655cc466d 100644
--- a/lldb/source/Plugins/SymbolVendor/ELF/SymbolVendorELF.cpp
+++ b/lldb/source/Plugins/SymbolVendor/ELF/SymbolVendorELF.cpp
@@ -44,6 +44,24 @@ llvm::StringRef SymbolVendorELF::GetPluginDescriptionStatic() {
"executables.";
}
+// If this is needed elsewhere, it can be exported/moved.
+static bool IsDwpSymbolFile(const lldb::ModuleSP &module_sp,
+ const FileSpec &file_spec) {
+ DataBufferSP dwp_file_data_sp;
+ lldb::offset_t dwp_file_data_offset = 0;
+ // Try to create an ObjectFile from the file_spec.
+ ObjectFileSP dwp_obj_file = ObjectFile::FindPlugin(
+ module_sp, &file_spec, 0, FileSystem::Instance().GetByteSize(file_spec),
+ dwp_file_data_sp, dwp_file_data_offset);
+ // The presence of a debug_cu_index section is the key identifying feature of
+ // a DWP file. Make sure we don't fill in the section list on dwp_obj_file
+ // (by calling GetSectionList(false)) as this function could be called before
+ // we may have all the symbol files collected and available.
+ return dwp_obj_file && ObjectFileELF::classof(dwp_obj_file.get()) &&
+ dwp_obj_file->GetSectionList(false)->FindSectionByType(
+ eSectionTypeDWARFDebugCuIndex, false);
+}
+
// CreateInstance
//
// Platforms can register a callback to use when creating symbol vendors to
@@ -87,8 +105,15 @@ SymbolVendorELF::CreateInstance(const lldb::ModuleSP &module_sp,
FileSpecList search_paths = Target::GetDefaultDebugFileSearchPaths();
FileSpec dsym_fspec =
PluginManager::LocateExecutableSymbolFile(module_spec, search_paths);
- if (!dsym_fspec)
- return nullptr;
+ if (!dsym_fspec || IsDwpSymbolFile(module_sp, dsym_fspec)) {
+ // If we have a stripped binary or if we got a DWP file, we should prefer
+ // symbols in the executable acquired through a plugin.
+ ModuleSpec unstripped_spec =
+ PluginManager::LocateExecutableObjectFile(module_spec);
+ if (!unstripped_spec)
+ return nullptr;
+ dsym_fspec = unstripped_spec.GetFileSpec();
+ }
DataBufferSP dsym_file_data_sp;
lldb::offset_t dsym_file_data_offset = 0;
diff --git a/lldb/test/API/debuginfod/Normal/Makefile b/lldb/test/API/debuginfod/Normal/Makefile
new file mode 100644
index 00000000000000..54bd7adae241f5
--- /dev/null
+++ b/lldb/test/API/debuginfod/Normal/Makefile
@@ -0,0 +1,19 @@
+C_SOURCES := main.c
+
+# For normal (non DWP) Debuginfod tests, we need:
+
+# * The full binary: a.out.unstripped
+# Produced by Makefile.rules with SAVE_FULL_DEBUG_BINARY set to YES and
+# SPLIT_DEBUG_SYMBOLS set to YES
+
+# * The stripped binary (a.out)
+# Produced by Makefile.rules with SPLIT_DEBUG_SYMBOLS set to YES
+
+# * The 'only-keep-debug' binary (a.out.debug)
+# Produced below
+
+SPLIT_DEBUG_SYMBOLS := YES
+SAVE_FULL_DEBUG_BINARY := YES
+GEN_GNU_BUILD_ID := YES
+
+include Makefile.rules
diff --git a/lldb/test/API/debuginfod/Normal/TestDebuginfod.py b/lldb/test/API/debuginfod/Normal/TestDebuginfod.py
new file mode 100644
index 00000000000000..72c76be3972407
--- /dev/null
+++ b/lldb/test/API/debuginfod/Normal/TestDebuginfod.py
@@ -0,0 +1,183 @@
+import os
+import shutil
+import tempfile
+
+import lldb
+from lldbsuite.test.decorators import *
+import lldbsuite.test.lldbutil as lldbutil
+from lldbsuite.test.lldbtest import *
+
+
+"""
+Test support for the DebugInfoD network symbol acquisition protocol.
+This one is for simple / no split-dwarf scenarios.
+
+For no-split-dwarf scenarios, there are 2 variations:
+1 - A stripped binary with it's corresponding unstripped binary:
+2 - A stripped binary with a corresponding --only-keep-debug symbols file
+"""
+
+
+class DebugInfodTests(TestBase):
+ # No need to try every flavor of debug inf.
+ NO_DEBUG_INFO_TESTCASE = True
+
+ def setUp(self):
+ TestBase.setUp(self)
+ # Don't run these tests if we don't have Debuginfod support
+ if "Debuginfod" not in configuration.enabled_plugins:
+ self.skipTest("The Debuginfod SymbolLocator plugin is not enabled")
+
+ def test_normal_no_symbols(self):
+ """
+ Validate behavior with no symbols or symbol locator.
+ ('baseline negative' behavior)
+ """
+ test_root = self.config_test(["a.out"])
+ self.try_breakpoint(False)
+
+ def test_normal_default(self):
+ """
+ Validate behavior with symbols, but no symbol locator.
+ ('baseline positive' behavior)
+ """
+ test_root = self.config_test(["a.out", "a.out.debug"])
+ self.try_breakpoint(True)
+
+ def test_debuginfod_symbols(self):
+ """
+ Test behavior with the full binary available from Debuginfod as
+ 'debuginfo' from the plug-in.
+ """
+ test_root = self.config_test(["a.out"], "a.out.unstripped")
+ self.try_breakpoint(True)
+
+ def test_debuginfod_executable(self):
+ """
+ Test behavior with the full binary available from Debuginfod as
+ 'executable' from the plug-in.
+ """
+ test_root = self.config_test(["a.out"], None, "a.out.unstripped")
+ self.try_breakpoint(True)
+
+ def test_debuginfod_okd_symbols(self):
+ """
+ Test behavior with the 'only-keep-debug' symbols available from Debuginfod.
+ """
+ test_root = self.config_test(["a.out"], "a.out.debug")
+ self.try_breakpoint(True)
+
+ def try_breakpoint(self, should_have_loc):
+ """
+ This function creates a target from self.aout, sets a function-name
+ breakpoint, and checks to see if we have a file/line location,
+ as a way to validate that the symbols have been loaded.
+ should_have_loc specifies if we're testing that symbols have or
+ haven't been loaded.
+ """
+ target = self.dbg.CreateTarget(self.aout)
+ self.assertTrue(target and target.IsValid(), "Target is valid")
+
+ bp = target.BreakpointCreateByName("func")
+ self.assertTrue(bp and bp.IsValid(), "Breakpoint is valid")
+ self.assertEqual(bp.GetNumLocations(), 1)
+
+ loc = bp.GetLocationAtIndex(0)
+ self.assertTrue(loc and loc.IsValid(), "Location is valid")
+ addr = loc.GetAddress()
+ self.assertTrue(addr and addr.IsValid(), "Loc address is valid")
+ line_entry = addr.GetLineEntry()
+ self.assertEqual(
+ should_have_loc,
+ line_entry != None and line_entry.IsValid(),
+ "Loc line entry is valid",
+ )
+ if should_have_loc:
+ self.assertEqual(line_entry.GetLine(), 4)
+ self.assertEqual(
+ line_entry.GetFileSpec().GetFilename(),
+ self.main_source_file.GetFilename(),
+ )
+ self.dbg.DeleteTarget(target)
+ shutil.rmtree(self.tmp_dir)
+
+ def config_test(self, local_files, debuginfo=None, executable=None):
+ """
+ Set up a test with local_files[] copied to a different location
+ so that we control which files are, or are not, found in the file system.
+ Also, create a stand-alone file-system 'hosted' debuginfod server with the
+ provided debuginfo and executable files (if they exist)
+
+ Make the filesystem look like:
+
+ /tmp/<tmpdir>/test/[local_files]
+
+ /tmp/<tmpdir>/cache (for lldb to use as a temp cache)
+
+ /tmp/<tmpdir>/buildid/<uuid>/executable -> <executable>
+ /tmp/<tmpdir>/buildid/<uuid>/debuginfo -> <debuginfo>
+ Returns the /tmp/<tmpdir> path
+ """
+
+ self.build()
+
+ uuid = self.getUUID("a.out")
+ if not uuid:
+ self.fail("Could not get UUID for a.out")
+ return
+ self.main_source_file = lldb.SBFileSpec("main.c")
+ self.tmp_dir = tempfile.mkdtemp()
+ test_dir = os.path.join(self.tmp_dir, "test")
+ os.makedirs(test_dir)
+
+ self.aout = ""
+ # Copy the files used by the test:
+ for f in local_files:
+ shutil.copy(self.getBuildArtifact(f), test_dir)
+ # The first item is the binary to be used for the test
+ if self.aout == "":
+ self.aout = os.path.join(test_dir, f)
+
+ use_debuginfod = debuginfo != None or executable != None
+
+ # Populated the 'file://... mocked' Debuginfod server:
+ if use_debuginfod:
+ os.makedirs(os.path.join(self.tmp_dir, "cache"))
+ uuid_dir = os.path.join(self.tmp_dir, "buildid", uuid)
+ os.makedirs(uuid_dir)
+ if debuginfo:
+ shutil.copy(
+ self.getBuildArtifact(debuginfo),
+ os.path.join(uuid_dir, "debuginfo"),
+ )
+ if executable:
+ shutil.copy(
+ self.getBuildArtifact(executable),
+ os.path.join(uuid_dir, "executable"),
+ )
+
+ # Configure LLDB for the test:
+ self.runCmd(
+ "settings set symbols.enable-external-lookup %s"
+ % str(use_debuginfod).lower()
+ )
+ self.runCmd("settings clear plugin.symbol-locator.debuginfod.server-urls")
+ if use_debuginfod:
+ self.runCmd(
+ "settings set plugin.symbol-locator.debuginfod.cache-path %s/cache"
+ % self.tmp_dir
+ )
+ self.runCmd(
+ "settings insert-before plugin.symbol-locator.debuginfod.server-urls 0 file://%s"
+ % self.tmp_dir
+ )
+
+ def getUUID(self, filename):
+ try:
+ target = self.dbg.CreateTarget(self.getBuildArtifact(filename))
+ module = target.GetModuleAtIndex(0)
+ uuid = module.GetUUIDString().replace("-", "").lower()
+ self.dbg.DeleteTarget(target)
+ return uuid if len(uuid) == 40 else None
+ except:
+ return None
diff --git a/lldb/test/API/debuginfod/Normal/main.c b/lldb/test/API/debuginfod/Normal/main.c
new file mode 100644
index 00000000000000..4c7184609b4536
--- /dev/null
+++ b/lldb/test/API/debuginfod/Normal/main.c
@@ -0,0 +1,7 @@
+// This is a dump little pair of test files
+
+int func(int argc, const char *argv[]) {
+ return (argc + 1) * (argv[argc][0] + 2);
+}
+
+int main(int argc, const char *argv[]) { return func(0, argv); }
diff --git a/lldb/test/API/debuginfod/SplitDWARF/Makefile b/lldb/test/API/debuginfod/SplitDWARF/Makefile
new file mode 100644
index 00000000000000..3ab9a969e5a447
--- /dev/null
+++ b/lldb/test/API/debuginfod/SplitDWARF/Makefile
@@ -0,0 +1,23 @@
+C_SOURCES := main.c
+
+# For split-dwarf Debuginfod tests, we need:
+
+# * A .DWP file (a.out.dwp)
+# Produced by Makefile.rules with MAKE_DWP set to YES
+
+# * The "full" binary (missing things that live in .dwo's) (a.out.unstripped)
+# Produced by Makefile.rules with SAVE_FULL_DEBUG_BINARY set to YES and
+# SPLIT_DEBUG_SYMBOLS set to YES
+
+# * The stripped binary (a.out)
+# Produced by Makefile.rules
+
+# * The 'only-keep-debug' binary (a.out.debug)
+# Produced below
+
+MAKE_DWP := YES
+SPLIT_DEBUG_SYMBOLS := YES
+SAVE_FULL_DEBUG_BINARY := YES
+GEN_GNU_BUILD_ID := YES
+
+include Makefile.rules
diff --git a/lldb/test/API/debuginfod/SplitDWARF/TestDebuginfodDWP.py b/lldb/test/API/debuginfod/SplitDWARF/TestDebuginfodDWP.py
new file mode 100644
index 00000000000000..b9ab481ad159f4
--- /dev/null
+++ b/lldb/test/API/debuginfod/SplitDWARF/TestDebuginfodDWP.py
@@ -0,0 +1,192 @@
+"""
+Test support for the DebugInfoD network symbol acquisition protocol.
+"""
+import os
+import shutil
+import tempfile
+
+import lldb
+from lldbsuite.test.decorators import *
+import lldbsuite.test.lldbutil as lldbutil
+from lldbsuite.test.lldbtest import *
+
+
+"""
+Test support for the DebugInfoD network symbol acquisition protocol.
+This file is for split-dwarf (dwp) scenarios.
+
+1 - A split binary target with it's corresponding DWP file
+2 - A stripped, split binary target with an unstripped binary and a DWP file
+3 - A stripped, split binary target with an --only-keep-debug symbols file and a DWP file
+"""
+
+
+class DebugInfodDWPTests(TestBase):
+ # No need to try every flavor of debug inf.
+ NO_DEBUG_INFO_TESTCASE = True
+
+ def setUp(self):
+ TestBase.setUp(self)
+ # Don't run these tests if we don't have Debuginfod support
+ if "Debuginfod" not in configuration.enabled_plugins:
+ self.skipTest("The Debuginfod SymbolLocator plugin is not enabled")
+
+ def test_normal_stripped(self):
+ """
+ Validate behavior with a stripped binary, no symbols or symbol locator.
+ """
+ self.config_test(["a.out"])
+ self.try_breakpoint(False)
+
+ def test_normal_stripped_split_with_dwp(self):
+ """
+ Validate behavior with symbols, but no symbol locator.
+ """
+ self.config_test(["a.out", "a.out.debug", "a.out.dwp"])
+ self.try_breakpoint(True)
+
+ def test_normal_stripped_only_dwp(self):
+ """
+ Validate behavior *with* dwp symbols only, but missing other symbols,
+ but no symbol locator. This shouldn't work: without the other symbols
+ DWO's appear mostly useless.
+ """
+ self.config_test(["a.out", "a.out.dwp"])
+ self.try_breakpoint(False)
+
+ def test_debuginfod_dwp_from_service(self):
+ """
+ Test behavior with the unstripped binary, and DWP from the service.
+ """
+ self.config_test(["a.out.debug"], "a.out.dwp")
+ self.try_breakpoint(True)
+
+ def test_debuginfod_both_symfiles_from_service(self):
+ """
+ Test behavior with a stripped binary, with the unstripped binary and
+ dwp symbols from Debuginfod.
+ """
+ self.config_test(["a.out"], "a.out.dwp", "a.out.unstripped")
+ self.try_breakpoint(True)
+
+ def test_debuginfod_both_okd_symfiles_from_service(self):
+ """
+ Test behavior with both the only-keep-debug symbols an...
[truncated]
``````````
</details>
https://github.com/llvm/llvm-project/pull/90622
More information about the lldb-commits
mailing list