[Libclc-dev] clang SVN r303370 broke libclc
Jan Vesely via Libclc-dev
libclc-dev at lists.llvm.org
Tue Jul 4 06:44:08 PDT 2017
On Tue, 2017-07-04 at 02:48 +0000, Liu, Yaxun (Sam) wrote:
> What are the target triples used by mesa/clover for amdgpu targets?
clover uses 'r600--' and 'amdgcn-mesa-mesa3d'.
>
> Currently amdgpu targets support 4 address space mappings:
>
> OpenCL/private-is-zero
> Non-OpenCL/private-is-zero
> OpenCL/generic-is-zero
> Non-OpenCL/generic-is-zero
>
> The future plan is:
> 1. deprecate private-is-zero address space mappings and only support
> generic-is-zero address space mappings
just out of curiosity, what's the use of private-is-zero mappings?
clover shouldn't really care (or is easily switched).
> 2. merge OpenCL and Non-OpenCL address space mapping so that it no
> longer depends on language
>
> It seems mesa/clover only uses OpenCL/private-is-zero address space
> mapping. If that is the case, I can initialize AddrSpaceMap in
> AMDGPUTargetInfo based on target triple and skip the adjustment by
> Language options for mesa/clover. Then mesa/clover itself does not
> need any change. This should still work after the planned two changes
> in the future.
thanks, that sounds good to me. let me know if there is a patch to
test. I can test r600 (turks), my carrizo machine is stuck on llvm4.0
because of ROCm.
Jan
>
> Sam
>
> -----Original Message-----
> From: Aaron Watry [mailto:awatry at gmail.com]
> Sent: Monday, July 03, 2017 4:55 PM
> To: Jan Vesely <jan.vesely at rutgers.edu>
> Cc: Liu, Yaxun (Sam) <Yaxun.Liu at amd.com>; Michel Dänzer <michel at daenzer.net>; libclc-dev at lists.llvm.org
> Subject: Re: [Libclc-dev] clang SVN r303370 broke libclc
>
> On Mon, Jul 3, 2017 at 2:08 PM, Jan Vesely <jan.vesely at rutgers.edu> wrote:
> > On Mon, 2017-07-03 at 00:23 +0000, Liu, Yaxun (Sam) wrote:
> > > There are some recent changes about address space mapping in Clang
> > > for amdgcn target for better support C++ based kernel languages.
> > >
> > > Currently, the constructor of AMDGPUTargetInfo does not initialize
> > > AddrSpaceMap. Instead, it is initialized by virtual member
> > > adjust(LangOptions &Opts) since the address space mapping of amdgcn
> > > target depends on language.
> > >
> > > For backward compatibility, I can let constructor of AMDGPUTargetInfo
> > > initialize AddrSpaceMap to the old value. Hopefully this can fix the
> > > regression.
> >
> > Hi,
> >
> > what's the expected situation going forward? will there be one
> > addrspacemap for all languages, or per language maps (set using
> > adjust())?
> > it'd be nice if we could adapt clover now and future proof it before
> > llvm 5 comes out.
>
> Agreed. I wouldn't mind a fix to LLVM/AMDGPU that preserves backwards compatibility, but if there's something that we can do to mesa/clover to adapt/fix our usage of llvm, I'm interested in hearing about it.
>
> --Aaron
>
> >
> > Jan
> >
> > >
> > > Thanks.
> > >
> > > Sam
> > >
> > > -----Original Message-----
> > > From: Aaron Watry [mailto:awatry at gmail.com]
> > > Sent: Saturday, July 01, 2017 12:48 PM
> > > To: Jan Vesely <jan.vesely at rutgers.edu>
> > > Cc: Liu, Yaxun (Sam) <Yaxun.Liu at amd.com>; Michel Dänzer
> > > <michel at daenzer.net>; libclc-dev at lists.llvm.org
> > > Subject: Re: [Libclc-dev] clang SVN r303370 broke libclc
> > >
> > > On Fri, Jun 30, 2017 at 11:10 AM, Jan Vesely via Libclc-dev <libclc-dev at lists.llvm.org> wrote:
> > > > On Wed, 2017-06-28 at 22:04 +0000, Liu, Yaxun (Sam) wrote:
> > > > > Hi Jan,
> > > > >
> > > > > What's the command to generate html like
> > > > > http://paul.rutgers.edu/~jv3 56/piglit/radeon-latest-5/problems.html with accumulated results?
> > > > >
> > > > > I used ./piglit summary html summary/turks_cl results/turks_cl_*
> > > > > but it only generates html with one result, which makes
> > > > > comparison of different runs difficult.
> > > >
> > > > there needs to be multiple directories with results in 'results/'
> > > > directory.
> > > > another problem might be that piglit does not overwrite existing
> > > > summaries (you should see an error message when that happens) so
> > > > you might be stuck with the first one you generated.
> > > > ./piglit summary html summary/out results/* --overwrite
> > > >
> > > > >
> > > > > BTW I suspect the regression was due to
> > > > > mesa/src/gallium/state_trackers/clover/llvm/codegen/common.cpp,
> > > > > line
> > > > > 131:
> > > > >
> > > > > if (address_space ==
> > > > > address_spaces[clang::LangAS::opencl_local
> > > > > -
> > > > > compat::lang_as_offset]) {
> > > > >
> > > > > After my change, this is no longer valid way to get target
> > > > > address space. Should be:
> > > > >
> > > > > if (address_space ==
> > > > > address_spaces[clang::LangAS::opencl_local]) {
> > > >
> > > > compat::lang_as_offset is 0 for llvm >= 5 so those two statements
> > > > should be identical. Am I missing something?
> > > >
> > >
> > > Now that I finally got my debugger setup working again, I can say
> > > that 'address_spaces', which is fetched by
> > > c.getTarget().getAddressSpaceMap() in common.cpp:make_kernel_args, is
> > > an empty collection which points to 'DefaultAddrSpaceMap' from
> > > clang/lib/basic/TargetInfo.cpp
> > >
> > > It seems like the clang target that clover is using doesn't have an
> > > address space map initialized at all at this time... I'm not sure if
> > > that's because we're setting up the clang instance incorrectly (wrong
> > > triple), or if that map is just never initialized in the AMDGPU
> > > target(s) in LLVM. I've found the AMDGPUAS struct in AMDGPU.h which contains the address space mappings that are shared among subtargets and the getAMDGPUAS(Triple) function in AMDGPUBaseInfo.cpp, but I'm not sure where that information gets copied over to something that's returned by TargetInfo.getAddressSpaceMap(). Hopefully someone who knows that code better than I can tell me if I'm missing something.
> > >
> > > --Aaron
> > >
> > >
> > >
> > > > thanks for working on this.
> > > > Jan
> > > >
> > > > >
> > > > > However I am not sure if there is other changes need to be made.
> > > > >
> > > > > Thanks.
> > > > >
> > > > > Sam
> > > > >
> > > > > -----Original Message-----
> > > > > From: Jan Vesely [mailto:jv356 at scarletmail.rutgers.edu] On Behalf
> > > > > Of Jan Vesely
> > > > > Sent: Tuesday, June 27, 2017 12:17 PM
> > > > > To: Liu, Yaxun (Sam) <Yaxun.Liu at amd.com>; Michel Dänzer
> > > > > <michel at daenzer.net>
> > > > > Cc: libclc-dev at lists.llvm.org
> > > > > Subject: Re: [Libclc-dev] clang SVN r303370 broke libclc
> > > > >
> > > > > On Tue, 2017-06-27 at 14:42 +0000, Liu, Yaxun (Sam) wrote:
> > > > > > I am trying to build mesa with opencl enabled on Ubuntu 16.04
> > > > > > so that I can reproduce the issue, however I got some issue.
> > > > > > After I build and install it, I cannot see the OpenCL icd for
> > > > > > mesa under /etc/OpenCL/vendors.
> > > > > >
> > > > > > Here is the command I use to build mesa:
> > > > > >
> > > > > > ./autogen.sh --prefix=/usr --libdir=/usr/lib/x86_64-linux-gnu
> > > > > > --with- llvm-prefix=/usr/llvm/x86_64-linux-gnu --enable-glx-tls
> > > > > > --enable- texture-float --disable-xvmc --disable-nine
> > > > > > --with-gallium- drivers=radeonsi,swrast --with-dri-drivers=
> > > > > > --with-egl- platforms=x11,drm --enable-gles1 --enable-gles2
> > > > > > -enable-opencl CXXFLAGS="-O2" CFLAGS="-O2"
> > > > > > make
> > > > > > sudo make install
> > > > > >
> > > > > > Can someone take a look if I missed something? Thanks.
> > > > >
> > > > > I think you need --enable-opencl_icd as well, otherwise mesa
> > > > > provides the root opencl library (LD_PRELOAD, or LD_LIBRARY_PATH
> > > > > should be enough to make it work even without icd)
> > > > >
> > > > > >
> > > > > > BTW my email was always bounced back from libclc-dev at lists.llvm.org.
> > > > > > I tried to subscribe to it for several times but never got response.
> > > > > > Can someone pass my email to the mailing list?
> > > > >
> > > > > no idea how to do that.
> > > > > AFAIK, Tom Stellard is the official maintainer of libclc. He might know better.
> > > > >
> > > > > regards,
> > > > > Jan
> > > > >
> > > > > >
> > > > > > Thanks.
> > > > > >
> > > > > > Sam
> > > > > >
> > > > > > -----Original Message-----
> > > > > > From: Liu, Yaxun (Sam)
> > > > > > Sent: Thursday, June 22, 2017 4:39 PM
> > > > > > To: 'Jan Vesely' <jan.vesely at rutgers.edu>; Michel Dänzer
> > > > > > <michel at daenzer.net>
> > > > > > Cc: libclc-dev at lists.llvm.org
> > > > > > Subject: RE: [Libclc-dev] clang SVN r303370 broke libclc
> > > > > >
> > > > > > Sorry for the delay. I am still working on it. I think the failure was due to some kernel argument metadata change.
> > > > > >
> > > > > > Sam
> > > > > >
> > > > > > -----Original Message-----
> > > > > > From: Jan Vesely [mailto:jv356 at scarletmail.rutgers.edu] On
> > > > > > Behalf Of Jan Vesely
> > > > > > Sent: Thursday, June 22, 2017 11:31 AM
> > > > > > To: Liu, Yaxun (Sam) <Yaxun.Liu at amd.com>; Michel Dänzer
> > > > > > <michel at daenzer.net>
> > > > > > Cc: libclc-dev at lists.llvm.org
> > > > > > Subject: Re: [Libclc-dev] clang SVN r303370 broke libclc
> > > > > >
> > > > > > Hi Sam,
> > > > > >
> > > > > > is there any progress on this regression? I still see the test failing on my machine.
> > > > > >
> > > > > > thanks,
> > > > > > Jan
> > > > > >
> > > > > > On Thu, 2017-05-25 at 10:18 -0400, Jan Vesely wrote:
> > > > > > > you can find the tests here:
> > > > > > > https://piglit.freedesktop.org/
> > > > > > >
> > > > > > > it's fairly straightforward to setup. my run cmdline is:
> > > > > > >
> > > > > > > OCL_ICD_VENDORS=/etc/OpenCL/vendors/mesa-git.icd python3
> > > > > > > ./piglit run tests/cl.py -o results/turks_cl_`date`
> > > > > > >
> > > > > > > the to generate html report I run:
> > > > > > >
> > > > > > > ./piglit summary html summary/turks_cl results/turks_cl_*
> > > > > > >
> > > > > > > it looks like this:
> > > > > > > http://paul.rutgers.edu/~jv356/piglit/radeon-latest-5/problem
> > > > > > > s.ht
> > > > > > > ml
> > > > > > >
> > > > > > > Jan
> > > > > > >
> > > > > > > just fyi the 'set kernel argument for array' test is also
> > > > > > > local memory related.
> > > > > > >
> > > > > > > On Thu, 2017-05-25 at 14:10 +0000, Liu, Yaxun (Sam) wrote:
> > > > > > > > Is these tests part of libclc? How do I run them?
> > > > > > > >
> > > > > > > > Sam
> > > > > > > >
> > > > > > > > -----Original Message-----
> > > > > > > > From: Michel Dänzer [mailto:michel at daenzer.net]
> > > > > > > > Sent: Thursday, May 25, 2017 3:46 AM
> > > > > > > > To: Jan Vesely <jan.vesely at rutgers.edu>; Liu, Yaxun (Sam)
> > > > > > > > <Yaxun.Liu at amd.com>
> > > > > > > > Cc: libclc-dev at lists.llvm.org
> > > > > > > > Subject: Re: [Libclc-dev] clang SVN r303370 broke libclc
> > > > > > > >
> > > > > > > > On 25/05/17 06:14 AM, Jan Vesely via Libclc-dev wrote:
> > > > > > > > > On Wed, 2017-05-24 at 16:22 -0400, Jan Vesely wrote:
> > > > > > > > > > On Wed, 2017-05-24 at 18:13 +0900, Michel Dänzer via Libclc-dev wrote:
> > > > > > > > > > > On 24/05/17 01:19 AM, Liu, Yaxun (Sam) wrote:
> > > > > > > > > > > > I have fixed the issue by
> > > > > > > > > > > > https://reviews.llvm.org/rL303644
> > > > > > > > > > >
> > > > > > > > > > > Seems to work fine, thanks!
> > > > > > > > > >
> > > > > > > > > > also seems to fix most of EG 670 opencl regressions.
> > > > > > > > >
> > > > > > > > > while at the same time it introduces regression in "set
> > > > > > > > > kernel argument for array" subtest on Turks.
> > > > > > > >
> > > > > > > > Actually, I'm also seeing that test and a bunch of local
> > > > > > > > atomic tests fail. Reverting both of Sam's patches and
> > > > > > > > rebuilding libclc and Mesa fixes them. Not sure why I
> > > > > > > > wasn't seeing these failures before, but it looks like there's still an issue here.
> > > > > > > >
> > > > > > > >
> > > > > > > > --
> > > > > > > > Earthling Michel Dänzer | http://www.amd.com
> > > > > > > > Libre software enthusiast | Mesa and X developer
> > > > > > > >
> > > > >
> > > > > --
> > > > > Jan Vesely <jan.vesely at rutgers.edu>
> > > >
> > > > _______________________________________________
> > > > Libclc-dev mailing list
> > > > Libclc-dev at lists.llvm.org
> > > > http://lists.llvm.org/cgi-bin/mailman/listinfo/libclc-dev
> > > >
--
Jan Vesely <jan.vesely at rutgers.edu>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: This is a digitally signed message part
URL: <http://lists.llvm.org/pipermail/libclc-dev/attachments/20170704/d6f3046f/attachment-0001.sig>
More information about the Libclc-dev
mailing list