[PATCH] OpenCL: Add new types for OpenCL 2.0

Wed Jun 17 07:38:33 PDT 2015

Updated from head SVN - no conflicts.
Still runs without failures.

On Wed, 17 Jun 2015 at 15:08 Pedro Ferreira <arkangath at gmail.com> wrote:

> Sorry, that was my bad. I forgot to set my editor back to llvm indentation
> settings and it inserted tabs instead of spaces.
>
> Line 1000 of SemaTypes is 79 characters long, which is the largest
> (longest) line in the patch. It is the same length of line 981 from where I
> copy-pasted the code (by your suggestion).
>
> Grep claims the attached patch has no tabs now :)
>
> On Wed, 17 Jun 2015 at 14:47 Anastasia Stulova <anastasia.stulova at arm.com>
> wrote:
>
>> I think there are still lines that are too long (especially in
>> SemaType.cpp). Have you run clang-format on your changes?
>>
>>
>>
>> Otherwise, no further comments from my side.
>>
>>
>>
>> Anastasia
>>
>>
>>
>> *From:* Pedro Ferreira [mailto:arkangath at gmail.com]
>> *Sent:* 15 June 2015 09:16
>> *To:* Eric Christopher; Anastasia Stulova; cfe-commits at cs.uiuc.edu
>>
>>
>> *Subject:* Re: [PATCH] OpenCL: Add new types for OpenCL 2.0
>>
>>
>>
>> There were a couple lines with > 80 columns, and this new patch version
>> fixes them.
>>
>>
>>
>>
>>
>> On Fri, 12 Jun 2015 at 21:03 Eric Christopher <echristo at gmail.com> wrote:
>>
>> Drive by review here.
>>
>>
>>
>> I was making sure there was debug info support for the bits, thanks for
>> adding it though I'm not seeing any tests ;)
>>
>>
>>
>> I'm pretty sure you have some 80-column violations and other formatting
>> things, could you clang-format your patch?
>>
>>
>>
>> Thanks!
>>
>>
>>
>> -eric
>>
>> On Fri, Jun 12, 2015 at 4:20 AM Pedro Ferreira <arkangath at gmail.com>
>> wrote:
>>
>> Awesome, thanks for the tips.
>> Updated version attached.
>>
>>
>>
>> Pedro
>>
>>
>>
>> On Thu, 11 Jun 2015 at 19:23 Anastasia Stulova <Anastasia.Stulova at arm.com>
>> wrote:
>>
>> CodeGen tests looks good!
>>
>> Regarding the extension, could you diagnose it during the type checking
>> instead. That way it will be cover all cases. You can look at the CL2.0
>> atomic type implementation in SemaType.cpp ConvertDeclSpecToType. Also
>> please reuse the same error err_type_requires_extension instead of adding
>> the new one. Please, add Sema test demonstating the error handling works
>> correctly.
>>
>> Thanks,
>> Anastasia
>> ________________________________________
>> From: Pedro Ferreira [arkangath at gmail.com]
>> Sent: Thursday, June 11, 2015 12:50 PM
>> To: Anastasia Stulova; cfe-commits at cs.uiuc.edu
>> Subject: Re: [PATCH] OpenCL: Add new types for OpenCL 2.0
>>
>> Ok, found out the right place to diagnose the extension and added the
>> tests.
>> I am not particularly convinced that was the best way to do it; comments
>> welcome.
>>
>> Pedro
>>
>> On Thu, 11 Jun 2015 at 11:43 Pedro Ferreira <arkangath at gmail.com<mailto:
>> arkangath at gmail.com>> wrote:
>> Actually, I spoke too soon - I found a test with -cl-std=CL2.0. I missed
>> that.
>>
>> On Thu, 11 Jun 2015 at 11:40 Pedro Ferreira <arkangath at gmail.com<mailto:
>> arkangath at gmail.com>> wrote:
>> The codegen test would imply adding a -cl-std=2.0 option to Clang, which
>> it currently does not have. This is because the types should only be
>> recognised if the CL 2.0 standard is explicitly asked for (the default is
>> to operate on 1.2 mode). Adding that option is a peripheral issue. I've
>> added the types on the header test under the appropriate "#if defined" but
>> when I tried to do the same on the .cl file, I found out that the test
>> parser does not recognise the preprocessor macro and therefore was causing
>> the test to (incorrectly) fail. As such, I reverted the test.
>>
>> As for the AS for the other types, I copy-pasted the code from event_t.
>> That's the reason why I'm actually using the "0". Are you suggesting I
>> should change event_t to use something else, and by consequence the new
>> types too? That would be a separate issue.
>> My guess is that these types are allocated on the stack, which by llvm
>> convention will always be 0.
>>
>> The new types are used by new builtins. I don't think there are any other
>> special semantics to it.
>>
>> I've added extension checks on the MSAA types, but I'm not sure if this
>> is the right place. New patch attached.
>>
>> Pedro
>>
>> On Thu, 11 Jun 2015 at 10:33 Anastasia Stulova <Anastasia.Stulova at arm.com
>> <mailto:Anastasia.Stulova at arm.com>> wrote:
>> Hi Pedro,
>>
>> Could we also add a Codegen test? Also it would be better not to use
>> constant directly as address space as the mapping could ideally be changed.
>> Is there any reason why you generate pointers to private AS?
>>
>> Are there any operations allowed on new types? Any semantical checks
>> needed?
>>
>> If MSAA types are part of an extension and not a part of the general
>> standard we should ideally diagnose that extension is enabled when they are
>> being used.
>>
>> Regards,
>> Anastasia
>> ________________________________________
>> From: cfe-commits-bounces at cs.uiuc.edu<mailto:
>> cfe-commits-bounces at cs.uiuc.edu> [cfe-commits-bounces at cs.uiuc.edu<mailto:
>> cfe-commits-bounces at cs.uiuc.edu>] On Behalf Of Pedro Ferreira [
>> arkangath at gmail.com<mailto:arkangath at gmail.com>]
>> Sent: Thursday, June 11, 2015 8:18 AM
>> To: cfe-commits at cs.uiuc.edu<mailto:cfe-commits at cs.uiuc.edu>
>> Subject: [PATCH] OpenCL: Add new types for OpenCL 2.0
>>
>> Hi all,
>>
>> This patch adds the new OpenCL types for 2.0 described at
>> https://www.khronos.org/registry/cl/sdk/2.0/docs/man/xhtml/otherDataTypes.html
>> <https://urldefense.proofpoint.com/v2/url?u=https-3A__www.khronos.org_registry_cl_sdk_2.0_docs_man_xhtml_otherDataTypes.html&d=AwMFaQ&c=8hUWFZcy2Z-Za5rBPlktOQ&r=BSqEv9KvKMW_Ob8SyngJ70KdZISM_ASROnREeq0cCxk&m=9Bdb39VF2l8sby_fS5dvbUnJSVMkbUEkua5v-UqAuGY&s=5Dqa4a6V-GRZkKn3l59ia5wJtJJzBqEjUrQlOV-8t-w&e=>
>> <
>> https://urldefense.proofpoint.com/v2/url?u=https-3A__www.khronos.org_registry_cl_sdk_2.0_docs_man_xhtml_otherDataTypes.html&d=AwMFaQ&c=8hUWFZcy2Z-Za5rBPlktOQ&r=BSqEv9KvKMW_Ob8SyngJ70KdZISM_ASROnREeq0cCxk&m=42YnWExwxwpeU6GPDY2_3RFxCqQakUbj_CXZsMsQ2jU&s=REOBNoaDio7qDyIDCqmXhxFvZYjMOK6vuXAttjOVsNI&e=
>> >
>> I also opened https://llvm.org/bugs/show_bug.cgi?id=23794
>> <https://urldefense.proofpoint.com/v2/url?u=https-3A__llvm.org_bugs_show-5Fbug.cgi-3Fid-3D23794&d=AwMFaQ&c=8hUWFZcy2Z-Za5rBPlktOQ&r=BSqEv9KvKMW_Ob8SyngJ70KdZISM_ASROnREeq0cCxk&m=9Bdb39VF2l8sby_fS5dvbUnJSVMkbUEkua5v-UqAuGY&s=DaxUQk4vxUwKYs93ZTAVu1S6Hdg2CQ1J96KmGJWtfDg&e=>
>> <
>> https://urldefense.proofpoint.com/v2/url?u=https-3A__llvm.org_bugs_show-5Fbug.cgi-3Fid-3D23794&d=AwMFaQ&c=8hUWFZcy2Z-Za5rBPlktOQ&r=BSqEv9KvKMW_Ob8SyngJ70KdZISM_ASROnREeq0cCxk&m=42YnWExwxwpeU6GPDY2_3RFxCqQakUbj_CXZsMsQ2jU&s=TAV4suAMaHgdIPA83Da3pQl7c68On7bAFWtnrUbt_Uk&e=>
>> for this. I keep forgetting you prefer patches sent to this mailing list.
>> This also adds lldb entries (fixes switch warnings).
>>
>> The types are:
>>
>> image2d_depth_t
>> image2d_array_depth_t
>> image2d_msaa_t
>> image2d_array_msaa_t
>> image2d_msaa_depth_t
>> image2d_array_msaa_depth_t
>> queue_t
>> ndrange_t
>> clk_event_t
>> reserve_id_t
>>
>> let me know if something looks wrong,
>> Pedro
>>
>> -- IMPORTANT NOTICE: The contents of this email and any attachments are
>> confidential and may also be privileged. If you are not the intended
>> recipient, please notify the sender immediately and do not disclose the
>> contents to any other person, use it for any purpose, or store or copy the
>> information in any medium.  Thank you.
>>
>> ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ,
>> Registered in England & Wales, Company No:  2557590
>> ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ,
>> Registered in England & Wales, Company No:  2548782
>>
>>
>> -- IMPORTANT NOTICE: The contents of this email and any attachments are
>> confidential and may also be privileged. If you are not the intended
>> recipient, please notify the sender immediately and do not disclose the
>> contents to any other person, use it for any purpose, or store or copy the
>> information in any medium.  Thank you.
>>
>> ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ,
>> Registered in England & Wales, Company No:  2557590
>> ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ,
>> Registered in England & Wales, Company No:  2548782
>>
>> _______________________________________________
>> cfe-commits mailing list
>> cfe-commits at cs.uiuc.edu
>> http://lists.cs.uiuc.edu/mailman/listinfo/cfe-commits
>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.llvm.org/pipermail/cfe-commits/attachments/20150617/de1e7b6f/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: clang-ocl2.patch
Type: text/x-patch
Size: 35362 bytes
Desc: not available
URL: <http://lists.llvm.org/pipermail/cfe-commits/attachments/20150617/de1e7b6f/attachment.bin>