[cfe-commits] r168297 - in /cfe/trunk: include/clang/Basic/DiagnosticDriverKinds.td include/clang/Driver/ToolChain.h lib/Driver/ToolChains.cpp lib/Driver/ToolChains.h lib/Driver/Tools.cpp lib/Driver/WindowsToolChain.cpp test/Driver/pic.c
Chandler Carruth
chandlerc at gmail.com
Tue Nov 20 13:30:55 PST 2012
It should be Pawel who is doing that this release I think. =]
On Tue, Nov 20, 2012 at 12:40 PM, Chad Rosier <mcrosier at apple.com> wrote:
> Sounds good to me. Bill, would you mind merging this to the branch?
>
> Chad
>
>
> On Nov 20, 2012, at 5:39 AM, Chandler Carruth <chandlerc at gmail.com> wrote:
>
>> Chad, I suspect this should go into 3.2... Without it, ASan is often
>> unable to link with PIE, and lots of other weird behavior is observed.
>> The bad range of commits is pretty good, ever since the intel patch
>> reworking this in the other direction.
>>
>> Pawel, Chad is the code owner for the driver.
>>
>> On Sun, Nov 18, 2012 at 7:52 PM, Chandler Carruth <chandlerc at gmail.com> wrote:
>>> Author: chandlerc
>>> Date: Sun Nov 18 21:52:03 2012
>>> New Revision: 168297
>>>
>>> URL: http://llvm.org/viewvc/llvm-project?rev=168297&view=rev
>>> Log:
>>> Completely re-work how the Clang driver interprets PIC and PIE options.
>>>
>>> There were numerous issues here that were all entangled, and so I've
>>> tried to do a general simplification of the logic.
>>> 1) The logic was mimicing actual GCC bugs, rather than "features". These
>>> have been fixed in trunk GCC, and this fixes Clang as well. Notably,
>>> the logic was always intended to be last-match-wins like any other
>>> flag.
>>> 2) The logic for handling '-mdynamic-no-pic' was preposterously unclear.
>>> It also allowed the use of this flag on non-Darwin platforms where it
>>> has no actual meaning. Now this option is handled directly based on
>>> tests of how llvm-gcc behaves, and it is only supported on Darwin.
>>> 3) The APIs for the Driver's ToolChains had the implementation ugliness
>>> of dynamic-no-pic leaking through them. They also had the
>>> implementation details of the LLVM relocation model flag names
>>> leaking through.
>>> 4) The actual results of passing these flags was incorrect on Darwin in
>>> many cases. For example, Darwin *always* uses PIC level 2 if it uses
>>> in PIC level, and Darwin *always* uses PIC on 64-bit regardless of
>>> the flags specified, including -fPIE. Darwin never compiles in PIE
>>> mode, but it can *link* in PIE mode.
>>> 5) Also, PIC was not always being enabled even when PIE was. This isn't
>>> a supported mode at all and may have caused some fallout in builds
>>> with complex PIC and PIE interactions.
>>>
>>> The result is (I hope) cleaner and clearer for readers. I've also left
>>> comments and tests about some of the truly strage behavior that is
>>> observed on Darwin platforms. We have no real testing of Windows
>>> platforms and PIC, but I don't have the tools handy to figure that out.
>>> Hopefully others can beef up our testing here.
>>>
>>> Unfortunately, I can't test this for every platform. =/ If folks have
>>> dependencies on these flags that aren't covered by tests, they may
>>> break. I've audited and ensured that all the changes in behavior of the
>>> existing tests are intentional and good. In particular I've tried to
>>> make sure the Darwin behavior (which is more suprising than the Linux
>>> behavior) also matches that of 'gcc' on my mac.
>>>
>>> Modified:
>>> cfe/trunk/include/clang/Basic/DiagnosticDriverKinds.td
>>> cfe/trunk/include/clang/Driver/ToolChain.h
>>> cfe/trunk/lib/Driver/ToolChains.cpp
>>> cfe/trunk/lib/Driver/ToolChains.h
>>> cfe/trunk/lib/Driver/Tools.cpp
>>> cfe/trunk/lib/Driver/WindowsToolChain.cpp
>>> cfe/trunk/test/Driver/pic.c
>>>
>>> Modified: cfe/trunk/include/clang/Basic/DiagnosticDriverKinds.td
>>> URL: http://llvm.org/viewvc/llvm-project/cfe/trunk/include/clang/Basic/DiagnosticDriverKinds.td?rev=168297&r1=168296&r2=168297&view=diff
>>> ==============================================================================
>>> --- cfe/trunk/include/clang/Basic/DiagnosticDriverKinds.td (original)
>>> +++ cfe/trunk/include/clang/Basic/DiagnosticDriverKinds.td Sun Nov 18 21:52:03 2012
>>> @@ -11,6 +11,8 @@
>>>
>>> def err_drv_no_such_file : Error<"no such file or directory: '%0'">;
>>> def err_drv_unsupported_opt : Error<"unsupported option '%0'">;
>>> +def err_drv_unsupported_opt_for_target : Error<
>>> + "unsupported option '%0' for target '%1'">;
>>> def err_drv_unsupported_option_argument : Error<
>>> "unsupported argument '%1' to option '%0'">;
>>> def err_drv_unknown_stdin_type : Error<
>>>
>>> Modified: cfe/trunk/include/clang/Driver/ToolChain.h
>>> URL: http://llvm.org/viewvc/llvm-project/cfe/trunk/include/clang/Driver/ToolChain.h?rev=168297&r1=168296&r2=168297&view=diff
>>> ==============================================================================
>>> --- cfe/trunk/include/clang/Driver/ToolChain.h (original)
>>> +++ cfe/trunk/include/clang/Driver/ToolChain.h Sun Nov 18 21:52:03 2012
>>> @@ -176,14 +176,13 @@
>>> /// by default.
>>> virtual bool IsUnwindTablesDefault() const;
>>>
>>> - /// GetDefaultRelocationModel - Return the LLVM name of the default
>>> - /// relocation model for this tool chain.
>>> - virtual const char *GetDefaultRelocationModel() const = 0;
>>> -
>>> - /// GetForcedPicModel - Return the LLVM name of the forced PIC model
>>> - /// for this tool chain, or 0 if this tool chain does not force a
>>> - /// particular PIC mode.
>>> - virtual const char *GetForcedPicModel() const = 0;
>>> + /// \brief Test whether this toolchain defaults to PIC.
>>> + virtual bool isPICDefault() const = 0;
>>> +
>>> + /// \brief Tests whether this toolchain forces its default for PIC or non-PIC.
>>> + /// If this returns true, any PIC related flags should be ignored and instead
>>> + /// the result of \c isPICDefault() is used exclusively.
>>> + virtual bool isPICDefaultForced() const = 0;
>>>
>>> /// SupportsProfiling - Does this tool chain support -pg.
>>> virtual bool SupportsProfiling() const { return true; }
>>>
>>> Modified: cfe/trunk/lib/Driver/ToolChains.cpp
>>> URL: http://llvm.org/viewvc/llvm-project/cfe/trunk/lib/Driver/ToolChains.cpp?rev=168297&r1=168296&r2=168297&view=diff
>>> ==============================================================================
>>> --- cfe/trunk/lib/Driver/ToolChains.cpp (original)
>>> +++ cfe/trunk/lib/Driver/ToolChains.cpp Sun Nov 18 21:52:03 2012
>>> @@ -886,14 +886,12 @@
>>> getTriple().getArch() == llvm::Triple::thumb);
>>> }
>>>
>>> -const char *Darwin::GetDefaultRelocationModel() const {
>>> - return "pic";
>>> +bool Darwin::isPICDefault() const {
>>> + return true;
>>> }
>>>
>>> -const char *Darwin::GetForcedPicModel() const {
>>> - if (getArch() == llvm::Triple::x86_64)
>>> - return "pic";
>>> - return 0;
>>> +bool Darwin::isPICDefaultForced() const {
>>> + return getArch() == llvm::Triple::x86_64;
>>> }
>>>
>>> bool Darwin::SupportsProfiling() const {
>>> @@ -1395,13 +1393,14 @@
>>> return getArch() == llvm::Triple::x86_64;
>>> }
>>>
>>> -const char *Generic_GCC::GetDefaultRelocationModel() const {
>>> - return "static";
>>> +bool Generic_GCC::isPICDefault() const {
>>> + return false;
>>> }
>>>
>>> -const char *Generic_GCC::GetForcedPicModel() const {
>>> - return 0;
>>> +bool Generic_GCC::isPICDefaultForced() const {
>>> + return false;
>>> }
>>> +
>>> /// Hexagon Toolchain
>>>
>>> Hexagon_TC::Hexagon_TC(const Driver &D, const llvm::Triple& Triple)
>>> @@ -1455,14 +1454,13 @@
>>> return *T;
>>> }
>>>
>>> -const char *Hexagon_TC::GetDefaultRelocationModel() const {
>>> - return "static";
>>> +bool Hexagon_TC::isPICDefault() const {
>>> + return false;
>>> }
>>>
>>> -const char *Hexagon_TC::GetForcedPicModel() const {
>>> - return 0;
>>> -} // End Hexagon
>>> -
>>> +bool Hexagon_TC::isPICDefaultForced() const {
>>> + return false;
>>> +}
>>>
>>> /// TCEToolChain - A tool chain using the llvm bitcode tools to perform
>>> /// all subcommands. See http://tce.cs.tut.fi for our peculiar target.
>>> @@ -1487,12 +1485,12 @@
>>> return true;
>>> }
>>>
>>> -const char *TCEToolChain::GetDefaultRelocationModel() const {
>>> - return "static";
>>> +bool TCEToolChain::isPICDefault() const {
>>> + return false;
>>> }
>>>
>>> -const char *TCEToolChain::GetForcedPicModel() const {
>>> - return 0;
>>> +bool TCEToolChain::isPICDefaultForced() const {
>>> + return false;
>>> }
>>>
>>> Tool &TCEToolChain::SelectTool(const Compilation &C,
>>>
>>> Modified: cfe/trunk/lib/Driver/ToolChains.h
>>> URL: http://llvm.org/viewvc/llvm-project/cfe/trunk/lib/Driver/ToolChains.h?rev=168297&r1=168296&r2=168297&view=diff
>>> ==============================================================================
>>> --- cfe/trunk/lib/Driver/ToolChains.h (original)
>>> +++ cfe/trunk/lib/Driver/ToolChains.h Sun Nov 18 21:52:03 2012
>>> @@ -129,8 +129,8 @@
>>> const ActionList &Inputs) const;
>>>
>>> virtual bool IsUnwindTablesDefault() const;
>>> - virtual const char *GetDefaultRelocationModel() const;
>>> - virtual const char *GetForcedPicModel() const;
>>> + virtual bool isPICDefault() const;
>>> + virtual bool isPICDefaultForced() const;
>>>
>>> protected:
>>> /// \name ToolChain Implementation Helper Functions
>>> @@ -156,8 +156,8 @@
>>> virtual Tool &SelectTool(const Compilation &C, const JobAction &JA,
>>> const ActionList &Inputs) const;
>>>
>>> - virtual const char *GetDefaultRelocationModel() const;
>>> - virtual const char *GetForcedPicModel() const;
>>> + virtual bool isPICDefault() const;
>>> + virtual bool isPICDefaultForced() const;
>>> };
>>>
>>> /// Darwin - The base Darwin tool chain.
>>> @@ -344,8 +344,8 @@
>>> virtual RuntimeLibType GetDefaultRuntimeLibType() const {
>>> return ToolChain::RLT_CompilerRT;
>>> }
>>> - virtual const char *GetDefaultRelocationModel() const;
>>> - virtual const char *GetForcedPicModel() const;
>>> + virtual bool isPICDefault() const;
>>> + virtual bool isPICDefaultForced() const;
>>>
>>> virtual bool SupportsProfiling() const;
>>>
>>> @@ -393,7 +393,7 @@
>>> std::string ComputeEffectiveClangTriple(const ArgList &Args,
>>> types::ID InputType) const;
>>>
>>> - virtual const char *GetDefaultRelocationModel() const { return "pic"; }
>>> + virtual bool isPICDefault() const { return false; };
>>> };
>>>
>>> class LLVM_LIBRARY_VISIBILITY Generic_ELF : public Generic_GCC {
>>> @@ -534,8 +534,8 @@
>>> virtual Tool &SelectTool(const Compilation &C, const JobAction &JA,
>>> const ActionList &Inputs) const;
>>> bool IsMathErrnoDefault() const;
>>> - const char* GetDefaultRelocationModel() const;
>>> - const char* GetForcedPicModel() const;
>>> + bool isPICDefault() const;
>>> + bool isPICDefaultForced() const;
>>>
>>> private:
>>> mutable llvm::DenseMap<unsigned, Tool*> Tools;
>>> @@ -557,8 +557,8 @@
>>>
>>> virtual bool IsIntegratedAssemblerDefault() const;
>>> virtual bool IsUnwindTablesDefault() const;
>>> - virtual const char *GetDefaultRelocationModel() const;
>>> - virtual const char *GetForcedPicModel() const;
>>> + virtual bool isPICDefault() const;
>>> + virtual bool isPICDefaultForced() const;
>>>
>>> virtual void AddClangSystemIncludeArgs(const ArgList &DriverArgs,
>>> ArgStringList &CC1Args) const;
>>>
>>> Modified: cfe/trunk/lib/Driver/Tools.cpp
>>> URL: http://llvm.org/viewvc/llvm-project/cfe/trunk/lib/Driver/Tools.cpp?rev=168297&r1=168296&r2=168297&view=diff
>>> ==============================================================================
>>> --- cfe/trunk/lib/Driver/Tools.cpp (original)
>>> +++ cfe/trunk/lib/Driver/Tools.cpp Sun Nov 18 21:52:03 2012
>>> @@ -1769,38 +1769,46 @@
>>>
>>> CheckCodeGenerationOptions(D, Args);
>>>
>>> - // Perform argument translation for LLVM backend. This
>>> - // takes some care in reconciling with llvm-gcc. The
>>> - // issue is that llvm-gcc translates these options based on
>>> - // the values in cc1, whereas we are processing based on
>>> - // the driver arguments.
>>> -
>>> - // This comes from the default translation the driver + cc1
>>> - // would do to enable flag_pic.
>>> -
>>> - Arg *LastPICArg = Args.getLastArg(options::OPT_fPIC, options::OPT_fno_PIC,
>>> - options::OPT_fpic, options::OPT_fno_pic);
>>> - // We need to check for PIE flags separately because they can override the
>>> - // PIC flags.
>>> - Arg *LastPIEArg = Args.getLastArg(options::OPT_fPIE, options::OPT_fno_PIE,
>>> - options::OPT_fpie, options::OPT_fno_pie);
>>> - bool PICDisabled = false;
>>> - bool PICEnabled = false;
>>> - bool PICForPIE = false;
>>> - if (LastPIEArg) {
>>> - PICForPIE = (LastPIEArg->getOption().matches(options::OPT_fPIE) ||
>>> - LastPIEArg->getOption().matches(options::OPT_fpie));
>>> - }
>>> - if (LastPICArg || PICForPIE) {
>>> - // The last PIE enabled argument can infer that PIC is enabled.
>>> - PICEnabled = (PICForPIE ||
>>> - LastPICArg->getOption().matches(options::OPT_fPIC) ||
>>> - LastPICArg->getOption().matches(options::OPT_fpic));
>>> - // We need to have PICDisabled inside the if statement because on darwin
>>> - // PIC is enabled by default even if PIC arguments are not in the command
>>> - // line (in this case causes PICDisabled to be true).
>>> - PICDisabled = !PICEnabled;
>>> + // For the PIC and PIE flag options, this logic is different from the legacy
>>> + // logic in very old versions of GCC, as that logic was just a bug no one had
>>> + // ever fixed. This logic is both more rational and consistent with GCC's new
>>> + // logic now that the bugs are fixed. The last argument relating to either
>>> + // PIC or PIE wins, and no other argument is used. If the last argument is
>>> + // any flavor of the '-fno-...' arguments, both PIC and PIE are disabled. Any
>>> + // PIE option implicitly enables PIC at the same level.
>>> + bool PIE = false;
>>> + bool PIC = getToolChain().isPICDefault();
>>> + bool IsPICLevelTwo = PIC;
>>> + if (Arg *A = Args.getLastArg(options::OPT_fPIC, options::OPT_fno_PIC,
>>> + options::OPT_fpic, options::OPT_fno_pic,
>>> + options::OPT_fPIE, options::OPT_fno_PIE,
>>> + options::OPT_fpie, options::OPT_fno_pie)) {
>>> + Option O = A->getOption();
>>> + if (O.matches(options::OPT_fPIC) || O.matches(options::OPT_fpic) ||
>>> + O.matches(options::OPT_fPIE) || O.matches(options::OPT_fpie)) {
>>> + PIE = O.matches(options::OPT_fPIE) || O.matches(options::OPT_fpie);
>>> + PIC = PIE || O.matches(options::OPT_fPIC) || O.matches(options::OPT_fpic);
>>> + IsPICLevelTwo = O.matches(options::OPT_fPIE) ||
>>> + O.matches(options::OPT_fPIC);
>>> + } else {
>>> + PIE = PIC = false;
>>> + }
>>> }
>>> + // Check whether the tool chain trumps the PIC-ness decision. If the PIC-ness
>>> + // is forced, then neither PIC nor PIE flags will have no effect.
>>> + if (getToolChain().isPICDefaultForced()) {
>>> + PIE = false;
>>> + PIC = getToolChain().isPICDefault();
>>> + IsPICLevelTwo = PIC;
>>> + }
>>> +
>>> + // Inroduce a Darwin-specific hack. If the default is PIC but the flags
>>> + // specified while enabling PIC enabled level 1 PIC, just force it back to
>>> + // level 2 PIC instead. This matches the behavior of Darwin GCC (based on my
>>> + // informal testing).
>>> + if (PIC && getToolChain().getTriple().isOSDarwin())
>>> + IsPICLevelTwo |= getToolChain().isPICDefault();
>>> +
>>> // Note that these flags are trump-cards. Regardless of the order w.r.t. the
>>> // PIC or PIE options above, if these show up, PIC is disabled.
>>> llvm::Triple Triple(TripleStr);
>>> @@ -1808,44 +1816,43 @@
>>> Args.hasArg(options::OPT_fapple_kext)) &&
>>> (Triple.getOS() != llvm::Triple::IOS ||
>>> Triple.isOSVersionLT(6)))
>>> - PICDisabled = true;
>>> + PIC = PIE = false;
>>> if (Args.hasArg(options::OPT_static))
>>> - PICDisabled = true;
>>> - bool DynamicNoPIC = Args.hasArg(options::OPT_mdynamic_no_pic);
>>> + PIC = PIE = false;
>>> +
>>> + if (Arg *A = Args.getLastArg(options::OPT_mdynamic_no_pic)) {
>>> + // This is a very special mode. It trumps the other modes, almost no one
>>> + // uses it, and it isn't even valid on any OS but Darwin.
>>> + if (!getToolChain().getTriple().isOSDarwin())
>>> + D.Diag(diag::err_drv_unsupported_opt_for_target)
>>> + << A->getSpelling() << getToolChain().getTriple().str();
>>> +
>>> + // FIXME: Warn when this flag trumps some other PIC or PIE flag.
>>>
>>> - // Select the relocation model.
>>> - const char *Model = getToolChain().GetForcedPicModel();
>>> - if (!Model) {
>>> - if (DynamicNoPIC)
>>> - Model = "dynamic-no-pic";
>>> - else if (PICDisabled)
>>> - Model = "static";
>>> - else if (PICEnabled)
>>> - Model = "pic";
>>> - else
>>> - Model = getToolChain().GetDefaultRelocationModel();
>>> - }
>>> - StringRef ModelStr = Model ? Model : "";
>>> - if (Model && ModelStr != "pic") {
>>> CmdArgs.push_back("-mrelocation-model");
>>> - CmdArgs.push_back(Model);
>>> - }
>>> + CmdArgs.push_back("dynamic-no-pic");
>>>
>>> - // Infer the __PIC__ and __PIE__ values.
>>> - if (ModelStr == "pic" && PICForPIE) {
>>> - CmdArgs.push_back("-pic-level");
>>> - CmdArgs.push_back((LastPIEArg &&
>>> - LastPIEArg->getOption().matches(options::OPT_fPIE)) ?
>>> - "2" : "1");
>>> - CmdArgs.push_back("-pie-level");
>>> - CmdArgs.push_back((LastPIEArg &&
>>> - LastPIEArg->getOption().matches(options::OPT_fPIE)) ?
>>> - "2" : "1");
>>> - } else if (ModelStr == "pic" || ModelStr == "dynamic-no-pic") {
>>> - CmdArgs.push_back("-pic-level");
>>> - CmdArgs.push_back(((ModelStr != "dynamic-no-pic" && LastPICArg &&
>>> - LastPICArg->getOption().matches(options::OPT_fPIC)) ||
>>> - getToolChain().getTriple().isOSDarwin()) ? "2" : "1");
>>> + // Only a forced PIC mode can cause the actual compile to have PIC defines
>>> + // etc., no flags are sufficient. This behavior was selected to closely
>>> + // match that of llvm-gcc and Apple GCC before that.
>>> + if (getToolChain().isPICDefault() && getToolChain().isPICDefaultForced()) {
>>> + CmdArgs.push_back("-pic-level");
>>> + CmdArgs.push_back("2");
>>> + }
>>> + } else {
>>> + // Currently, LLVM only knows about PIC vs. static; the PIE differences are
>>> + // handled in Clang's IRGen by the -pie-level flag.
>>> + CmdArgs.push_back("-mrelocation-model");
>>> + CmdArgs.push_back(PIC ? "pic" : "static");
>>> +
>>> + if (PIC) {
>>> + CmdArgs.push_back("-pic-level");
>>> + CmdArgs.push_back(IsPICLevelTwo ? "2" : "1");
>>> + if (PIE) {
>>> + CmdArgs.push_back("-pie-level");
>>> + CmdArgs.push_back(IsPICLevelTwo ? "2" : "1");
>>> + }
>>> + }
>>> }
>>>
>>> if (!Args.hasFlag(options::OPT_fmerge_all_constants,
>>>
>>> Modified: cfe/trunk/lib/Driver/WindowsToolChain.cpp
>>> URL: http://llvm.org/viewvc/llvm-project/cfe/trunk/lib/Driver/WindowsToolChain.cpp?rev=168297&r1=168296&r2=168297&view=diff
>>> ==============================================================================
>>> --- cfe/trunk/lib/Driver/WindowsToolChain.cpp (original)
>>> +++ cfe/trunk/lib/Driver/WindowsToolChain.cpp Sun Nov 18 21:52:03 2012
>>> @@ -84,14 +84,12 @@
>>> return getArch() == llvm::Triple::x86_64;
>>> }
>>>
>>> -const char *Windows::GetDefaultRelocationModel() const {
>>> - return "static";
>>> +bool Windows::isPICDefault() const {
>>> + return getArch() == llvm::Triple::x86_64;
>>> }
>>>
>>> -const char *Windows::GetForcedPicModel() const {
>>> - if (getArch() == llvm::Triple::x86_64)
>>> - return "pic";
>>> - return 0;
>>> +bool Windows::isPICDefaultForced() const {
>>> + return getArch() == llvm::Triple::x86_64;
>>> }
>>>
>>> // FIXME: This probably should goto to some platform utils place.
>>>
>>> Modified: cfe/trunk/test/Driver/pic.c
>>> URL: http://llvm.org/viewvc/llvm-project/cfe/trunk/test/Driver/pic.c?rev=168297&r1=168296&r2=168297&view=diff
>>> ==============================================================================
>>> --- cfe/trunk/test/Driver/pic.c (original)
>>> +++ cfe/trunk/test/Driver/pic.c Sun Nov 18 21:52:03 2012
>>> @@ -5,28 +5,34 @@
>>> // CHECK-NO-PIC-NOT: "-pic-level"
>>> // CHECK-NO-PIC-NOT: "-pie-level"
>>> //
>>> -// CHECK-DYNAMIC-NO-PIC1: "-mrelocation-model" "dynamic-no-pic"
>>> -// CHECK-DYNAMIC-NO-PIC1: "-pic-level" "1"
>>> -//
>>> -// CHECK-DYNAMIC-NO-PIC2: "-mrelocation-model" "dynamic-no-pic"
>>> -// CHECK-DYNAMIC-NO-PIC2: "-pic-level" "2"
>>> -//
>>> -// CHECK-PIC1-NOT: "-mrelocation-model"
>>> +// CHECK-PIC1: "-mrelocation-model" "pic"
>>> // CHECK-PIC1: "-pic-level" "1"
>>> //
>>> -// CHECK-PIC2-NOT: "-mrelocation-model"
>>> +// CHECK-PIC2: "-mrelocation-model" "pic"
>>> // CHECK-PIC2: "-pic-level" "2"
>>> //
>>> -// CHECK-PIE1-NOT: "-mrelocation-model"
>>> +// CHECK-PIE1: "-mrelocation-model" "pic"
>>> +// CHECK-PIE1: "-pic-level" "1"
>>> // CHECK-PIE1: "-pie-level" "1"
>>> //
>>> -// CHECK-PIE2-NOT: "-mrelocation-model"
>>> +// CHECK-PIE2: "-mrelocation-model" "pic"
>>> +// CHECK-PIE2: "-pic-level" "2"
>>> // CHECK-PIE2: "-pie-level" "2"
>>> //
>>> -// CHECK-PIE3: "{{.*}}ld{{(.exe)?}}"
>>> -// CHECK-PIE3: "-pie"
>>> -// CHECK-PIE3: "Scrt1.o" "crti.o" "crtbeginS.o"
>>> -// CHECK-PIE3: "crtendS.o" "crtn.o"
>>> +// CHECK-PIE-LD: "{{.*}}ld{{(.exe)?}}"
>>> +// CHECK-PIE-LD: "-pie"
>>> +// CHECK-PIE-LD: "Scrt1.o" "crti.o" "crtbeginS.o"
>>> +// CHECK-PIE-LD: "crtendS.o" "crtn.o"
>>> +//
>>> +// CHECK-DYNAMIC-NO-PIC-32: "-mrelocation-model" "dynamic-no-pic"
>>> +// CHECK-DYNAMIC-NO-PIC-32-NOT: "-pic-level"
>>> +// CHECK-DYNAMIC-NO-PIC-32-NOT: "-pie-level"
>>> +//
>>> +// CHECK-DYNAMIC-NO-PIC-64: "-mrelocation-model" "dynamic-no-pic"
>>> +// CHECK-DYNAMIC-NO-PIC-64: "-pic-level" "2"
>>> +// CHECK-DYNAMIC-NO-PIC-64-NOT: "-pie-level"
>>> +//
>>> +// CHECK-NON-DARWIN-DYNAMIC-NO-PIC: error: unsupported option '-mdynamic-no-pic' for target 'i386-unknown-unknown'
>>> //
>>> // RUN: %clang -c %s -target i386-unknown-unknown -### 2>&1 \
>>> // RUN: | FileCheck %s --check-prefix=CHECK-NO-PIC
>>> @@ -38,107 +44,141 @@
>>> // RUN: | FileCheck %s --check-prefix=CHECK-PIE1
>>> // RUN: %clang -c %s -target i386-unknown-unknown -fPIE -### 2>&1 \
>>> // RUN: | FileCheck %s --check-prefix=CHECK-PIE2
>>> +//
>>> +// Check that PIC and PIE flags obey last-match-wins. If the last flag is
>>> +// a no-* variant, regardless of which variant or which flags precede it, we
>>> +// get no PIC.
>>> // RUN: %clang -c %s -target i386-unknown-unknown -fpic -fno-pic -### 2>&1 \
>>> // RUN: | FileCheck %s --check-prefix=CHECK-NO-PIC
>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fPIC -fno-PIC -### 2>&1 \
>>> +// RUN: %clang -c %s -target i386-unknown-unknown -fPIC -fno-pic -### 2>&1 \
>>> +// RUN: | FileCheck %s --check-prefix=CHECK-NO-PIC
>>> +// RUN: %clang -c %s -target i386-unknown-unknown -fpie -fno-pic -### 2>&1 \
>>> +// RUN: | FileCheck %s --check-prefix=CHECK-NO-PIC
>>> +// RUN: %clang -c %s -target i386-unknown-unknown -fPIE -fno-pic -### 2>&1 \
>>> // RUN: | FileCheck %s --check-prefix=CHECK-NO-PIC
>>> // RUN: %clang -c %s -target i386-unknown-unknown -fpic -fno-PIC -### 2>&1 \
>>> // RUN: | FileCheck %s --check-prefix=CHECK-NO-PIC
>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fPIC -fno-pic -### 2>&1 \
>>> +// RUN: %clang -c %s -target i386-unknown-unknown -fPIC -fno-PIC -### 2>&1 \
>>> +// RUN: | FileCheck %s --check-prefix=CHECK-NO-PIC
>>> +// RUN: %clang -c %s -target i386-unknown-unknown -fpie -fno-PIC -### 2>&1 \
>>> +// RUN: | FileCheck %s --check-prefix=CHECK-NO-PIC
>>> +// RUN: %clang -c %s -target i386-unknown-unknown -fPIE -fno-PIC -### 2>&1 \
>>> +// RUN: | FileCheck %s --check-prefix=CHECK-NO-PIC
>>> +// RUN: %clang -c %s -target i386-unknown-unknown -fpic -fno-pie -### 2>&1 \
>>> +// RUN: | FileCheck %s --check-prefix=CHECK-NO-PIC
>>> +// RUN: %clang -c %s -target i386-unknown-unknown -fPIC -fno-pie -### 2>&1 \
>>> // RUN: | FileCheck %s --check-prefix=CHECK-NO-PIC
>>> // RUN: %clang -c %s -target i386-unknown-unknown -fpie -fno-pie -### 2>&1 \
>>> // RUN: | FileCheck %s --check-prefix=CHECK-NO-PIC
>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fPIE -fno-PIE -### 2>&1 \
>>> +// RUN: %clang -c %s -target i386-unknown-unknown -fPIE -fno-pie -### 2>&1 \
>>> +// RUN: | FileCheck %s --check-prefix=CHECK-NO-PIC
>>> +// RUN: %clang -c %s -target i386-unknown-unknown -fpic -fno-PIE -### 2>&1 \
>>> +// RUN: | FileCheck %s --check-prefix=CHECK-NO-PIC
>>> +// RUN: %clang -c %s -target i386-unknown-unknown -fPIC -fno-PIE -### 2>&1 \
>>> // RUN: | FileCheck %s --check-prefix=CHECK-NO-PIC
>>> // RUN: %clang -c %s -target i386-unknown-unknown -fpie -fno-PIE -### 2>&1 \
>>> // RUN: | FileCheck %s --check-prefix=CHECK-NO-PIC
>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fPIE -fno-pie -### 2>&1 \
>>> +// RUN: %clang -c %s -target i386-unknown-unknown -fPIE -fno-PIE -### 2>&1 \
>>> // RUN: | FileCheck %s --check-prefix=CHECK-NO-PIC
>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fpie -fno-pic -### 2>&1 \
>>> -// RUN: | FileCheck %s --check-prefix=CHECK-PIC1
>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fpie -fno-pic -### 2>&1 \
>>> -// RUN: | FileCheck %s --check-prefix=CHECK-PIE1
>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fpic -fno-pie -### 2>&1 \
>>> -// RUN: | FileCheck %s --check-prefix=CHECK-PIC1
>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fpic -fPIC -### 2>&1 \
>>> -// RUN: | FileCheck %s --check-prefix=CHECK-PIC2
>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fPIC -fpic -### 2>&1 \
>>> -// RUN: | FileCheck %s --check-prefix=CHECK-PIC1
>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fpic -fPIE -fpie -### 2>&1 \
>>> -// RUN: | FileCheck %s --check-prefix=CHECK-PIE1
>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fpie -fPIC -fPIE -### 2>&1 \
>>> -// RUN: | FileCheck %s --check-prefix=CHECK-PIE2
>>> //
>>> -// Cases where both pic and pie are specified
>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fpic -fpie -### 2>&1 \
>>> -// RUN: | FileCheck %s --check-prefix=CHECK-PIC1
>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fpic -fpie -### 2>&1 \
>>> -// RUN: | FileCheck %s --check-prefix=CHECK-PIE1
>>> +// Last-match-wins where both pic and pie are specified.
>>> // RUN: %clang -c %s -target i386-unknown-unknown -fpie -fpic -### 2>&1 \
>>> // RUN: | FileCheck %s --check-prefix=CHECK-PIC1
>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fpie -fpic -### 2>&1 \
>>> -// RUN: | FileCheck %s --check-prefix=CHECK-PIE1
>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fpic -fPIE -### 2>&1 \
>>> -// RUN: | FileCheck %s --check-prefix=CHECK-PIC2
>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fpic -fPIE -### 2>&1 \
>>> -// RUN: | FileCheck %s --check-prefix=CHECK-PIE2
>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fpie -fPIC -### 2>&1 \
>>> +// RUN: %clang -c %s -target i386-unknown-unknown -fPIE -fpic -### 2>&1 \
>>> // RUN: | FileCheck %s --check-prefix=CHECK-PIC1
>>> // RUN: %clang -c %s -target i386-unknown-unknown -fpie -fPIC -### 2>&1 \
>>> -// RUN: | FileCheck %s --check-prefix=CHECK-PIE1
>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fpie -fPIE -### 2>&1 \
>>> // RUN: | FileCheck %s --check-prefix=CHECK-PIC2
>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fpie -fPIE -### 2>&1 \
>>> -// RUN: | FileCheck %s --check-prefix=CHECK-PIE2
>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fPIC -fpie -### 2>&1 \
>>> -// RUN: | FileCheck %s --check-prefix=CHECK-PIC1
>>> +// RUN: %clang -c %s -target i386-unknown-unknown -fPIE -fPIC -### 2>&1 \
>>> +// RUN: | FileCheck %s --check-prefix=CHECK-PIC2
>>> +// RUN: %clang -c %s -target i386-unknown-unknown -fpic -fpie -### 2>&1 \
>>> +// RUN: | FileCheck %s --check-prefix=CHECK-PIE1
>>> // RUN: %clang -c %s -target i386-unknown-unknown -fPIC -fpie -### 2>&1 \
>>> // RUN: | FileCheck %s --check-prefix=CHECK-PIE1
>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fPIC -fPIE -### 2>&1 \
>>> -// RUN: | FileCheck %s --check-prefix=CHECK-PIC2
>>> +// RUN: %clang -c %s -target i386-unknown-unknown -fpic -fPIE -### 2>&1 \
>>> +// RUN: | FileCheck %s --check-prefix=CHECK-PIE2
>>> // RUN: %clang -c %s -target i386-unknown-unknown -fPIC -fPIE -### 2>&1 \
>>> // RUN: | FileCheck %s --check-prefix=CHECK-PIE2
>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fPIE -fpic -### 2>&1 \
>>> +//
>>> +// Last-match-wins when selecting level 1 vs. level 2.
>>> +// RUN: %clang -c %s -target i386-unknown-unknown -fpic -fPIC -### 2>&1 \
>>> // RUN: | FileCheck %s --check-prefix=CHECK-PIC2
>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fPIE -fpic -### 2>&1 \
>>> -// RUN: | FileCheck %s --check-prefix=CHECK-PIE2
>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fPIE -fpie -### 2>&1 \
>>> +// RUN: %clang -c %s -target i386-unknown-unknown -fPIC -fpic -### 2>&1 \
>>> // RUN: | FileCheck %s --check-prefix=CHECK-PIC1
>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fPIE -fpie -### 2>&1 \
>>> +// RUN: %clang -c %s -target i386-unknown-unknown -fpic -fPIE -fpie -### 2>&1 \
>>> // RUN: | FileCheck %s --check-prefix=CHECK-PIE1
>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fPIE -fPIC -### 2>&1 \
>>> -// RUN: | FileCheck %s --check-prefix=CHECK-PIC2
>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fPIE -fPIC -### 2>&1 \
>>> +// RUN: %clang -c %s -target i386-unknown-unknown -fpie -fPIC -fPIE -### 2>&1 \
>>> // RUN: | FileCheck %s --check-prefix=CHECK-PIE2
>>> //
>>> -// Defaults change for Darwin.
>>> -// RUN: %clang -c %s -target i386-apple-darwin -### 2>&1 \
>>> -// RUN: | FileCheck %s --check-prefix=CHECK-PIC2
>>> -// RUN: %clang -c %s -target i386-apple-darwin -fno-pic -### 2>&1 \
>>> -// RUN: | FileCheck %s --check-prefix=CHECK-NO-PIC
>>> -// RUN: %clang -c %s -target i386-apple-darwin -fno-PIC -### 2>&1 \
>>> -// RUN: | FileCheck %s --check-prefix=CHECK-NO-PIC
>>> -//
>>> // Make sure -pie is passed to along to ld and that the right *crt* files
>>> // are linked in.
>>> // RUN: %clang %s -target i386-unknown-freebsd -fPIE -pie -### \
>>> // RUN: --sysroot=%S/Inputs/basic_freebsd_tree 2>&1 \
>>> -// RUN: | FileCheck %s --check-prefix=CHECK-PIE3
>>> +// RUN: | FileCheck %s --check-prefix=CHECK-PIE-LD
>>> // RUN: %clang %s -target i386-linux-gnu -fPIE -pie -### \
>>> // RUN: --sysroot=%S/Inputs/basic_linux_tree 2>&1 \
>>> -// RUN: | FileCheck %s --check-prefix=CHECK-PIE3
>>> +// RUN: | FileCheck %s --check-prefix=CHECK-PIE-LD
>>> +// RUN: %clang %s -target i386-linux-gnu -fPIC -pie -### \
>>> +// RUN: --sysroot=%S/Inputs/basic_linux_tree 2>&1 \
>>> +// RUN: | FileCheck %s --check-prefix=CHECK-PIE-LD
>>> //
>>> // Disregard any of the PIC-specific flags if we have a trump-card flag.
>>> // RUN: %clang -c %s -target i386-unknown-unknown -mkernel -fPIC -### 2>&1 \
>>> // RUN: | FileCheck %s --check-prefix=CHECK-NO-PIC
>>> // RUN: %clang -c %s -target i386-unknown-unknown -static -fPIC -### 2>&1 \
>>> // RUN: | FileCheck %s --check-prefix=CHECK-NO-PIC
>>> -// RUN: %clang -c %s -target i386-unknown-unknown -mdynamic-no-pic -fPIC -### 2>&1 \
>>> -// RUN: | FileCheck %s --check-prefix=CHECK-DYNAMIC-NO-PIC1
>>> -// RUN: %clang -c %s -target i386-apple-darwin -mdynamic-no-pic -fPIC -### 2>&1 \
>>> -// RUN: | FileCheck %s --check-prefix=CHECK-DYNAMIC-NO-PIC2
>>> -
>>> -// Checks for ARM
>>> +//
>>> +// Darwin is a beautiful and unique snowflake when it comes to these flags.
>>> +// When targetting a 32-bit darwin system, the -fno-* flag variants work and
>>> +// disable PIC, but any other flag enables PIC (*not* PIE) even if the flag
>>> +// specifies PIE. On 64-bit targets, there is simply nothing you can do, there
>>> +// is no PIE, there is only PIC when it comes to compilation.
>>> +// RUN: %clang -c %s -target i386-apple-darwin -### 2>&1 \
>>> +// RUN: | FileCheck %s --check-prefix=CHECK-PIC2
>>> +// RUN: %clang -c %s -target i386-apple-darwin -fpic -### 2>&1 \
>>> +// RUN: | FileCheck %s --check-prefix=CHECK-PIC2
>>> +// RUN: %clang -c %s -target i386-apple-darwin -fPIC -### 2>&1 \
>>> +// RUN: | FileCheck %s --check-prefix=CHECK-PIC2
>>> +// RUN: %clang -c %s -target i386-apple-darwin -fpie -### 2>&1 \
>>> +// RUN: | FileCheck %s --check-prefix=CHECK-PIC2
>>> +// RUN: %clang -c %s -target i386-apple-darwin -fPIE -### 2>&1 \
>>> +// RUN: | FileCheck %s --check-prefix=CHECK-PIC2
>>> +// RUN: %clang -c %s -target i386-apple-darwin -fno-PIC -### 2>&1 \
>>> +// RUN: | FileCheck %s --check-prefix=CHECK-NO-PIC
>>> +// RUN: %clang -c %s -target i386-apple-darwin -fno-PIE -### 2>&1 \
>>> +// RUN: | FileCheck %s --check-prefix=CHECK-NO-PIC
>>> +// RUN: %clang -c %s -target i386-apple-darwin -fno-PIC -fpic -### 2>&1 \
>>> +// RUN: | FileCheck %s --check-prefix=CHECK-PIC2
>>> +// RUN: %clang -c %s -target i386-apple-darwin -fno-PIC -fPIE -### 2>&1 \
>>> +// RUN: | FileCheck %s --check-prefix=CHECK-PIC2
>>> +// RUN: %clang -c %s -target x86_64-apple-darwin -fno-PIC -### 2>&1 \
>>> +// RUN: | FileCheck %s --check-prefix=CHECK-PIC2
>>> +// RUN: %clang -c %s -target x86_64-apple-darwin -fno-PIE -### 2>&1 \
>>> +// RUN: | FileCheck %s --check-prefix=CHECK-PIC2
>>> +// RUN: %clang -c %s -target x86_64-apple-darwin -fpic -### 2>&1 \
>>> +// RUN: | FileCheck %s --check-prefix=CHECK-PIC2
>>> +// RUN: %clang -c %s -target x86_64-apple-darwin -fPIE -### 2>&1 \
>>> +// RUN: | FileCheck %s --check-prefix=CHECK-PIC2
>>> +//
>>> +// Darwin gets even more special with '-mdynamic-no-pic'. This flag is only
>>> +// valid on Darwin, and it's behavior is very strange but needs to remain
>>> +// consistent for compatibility.
>>> +// RUN: %clang -c %s -target i386-unknown-unknown -mdynamic-no-pic -### 2>&1 \
>>> +// RUN: | FileCheck %s --check-prefix=CHECK-NON-DARWIN-DYNAMIC-NO-PIC
>>> +// RUN: %clang -c %s -target i386-apple-darwin -mdynamic-no-pic -### 2>&1 \
>>> +// RUN: | FileCheck %s --check-prefix=CHECK-DYNAMIC-NO-PIC-32
>>> +// RUN: %clang -c %s -target i386-apple-darwin -mdynamic-no-pic -fno-pic -### 2>&1 \
>>> +// RUN: | FileCheck %s --check-prefix=CHECK-DYNAMIC-NO-PIC-32
>>> +// RUN: %clang -c %s -target i386-apple-darwin -mdynamic-no-pic -fpie -### 2>&1 \
>>> +// RUN: | FileCheck %s --check-prefix=CHECK-DYNAMIC-NO-PIC-32
>>> +// RUN: %clang -c %s -target x86_64-apple-darwin -mdynamic-no-pic -### 2>&1 \
>>> +// RUN: | FileCheck %s --check-prefix=CHECK-DYNAMIC-NO-PIC-64
>>> +// RUN: %clang -c %s -target x86_64-apple-darwin -mdynamic-no-pic -fno-pic -### 2>&1 \
>>> +// RUN: | FileCheck %s --check-prefix=CHECK-DYNAMIC-NO-PIC-64
>>> +// RUN: %clang -c %s -target x86_64-apple-darwin -mdynamic-no-pic -fpie -### 2>&1 \
>>> +// RUN: | FileCheck %s --check-prefix=CHECK-DYNAMIC-NO-PIC-64
>>> +//
>>> +// Checks for ARM+Apple+IOS including -fapple-kext, -mkernel, and iphoneos
>>> +// version boundaries.
>>> // RUN: %clang -c %s -target armv7-apple-ios -fapple-kext -miphoneos-version-min=6.0.0 -### 2>&1 \
>>> // RUN: | FileCheck %s --check-prefix=CHECK-PIC2
>>> // RUN: %clang -c %s -target armv7-apple-ios -mkernel -miphoneos-version-min=6.0.0 -### 2>&1 \
>>>
>>>
>>> _______________________________________________
>>> cfe-commits mailing list
>>> cfe-commits at cs.uiuc.edu
>>> http://lists.cs.uiuc.edu/mailman/listinfo/cfe-commits
> _______________________________________________
> cfe-commits mailing list
> cfe-commits at cs.uiuc.edu
> http://lists.cs.uiuc.edu/mailman/listinfo/cfe-commits
More information about the cfe-commits
mailing list