[Mlir-commits] [mlir] [mlir][SPIRV] Add support for dense_resource in arith to spirv (PR #91318)

[llvmlistbot at llvm.org]

https://github.com/maxbartel created https://github.com/llvm/llvm-project/pull/91318

This adds support for `dense_resource` in arith to spirv. 

Note that this inlines the blob into the IR. Another possibility would be to add proper dense_resource support to spirv, but there is a lot of special handling going on to convert a `DenseElementsAttr` to the correct SPIRV type. Some of that even iterates over all the values in the Attribute. For proper support of a `DenseResourceElementsAttr` this probably needs a redesign. I would like to hear some opinions on that!

The test is disabled on non little Endian machines. See https://github.com/llvm/llvm-project/issues/6346 for more informations.

>From fc0589a5bff7ed61d173cc4e21c68bbe4ff4e263 Mon Sep 17 00:00:00 2001
From: Maximilian Bartel <bartel at roofline.ai>
Date: Tue, 7 May 2024 12:18:26 +0200
Subject: [PATCH] [mlir][SPIRV] Add support for dense_resource in arith to
 spirv

---
 .../Conversion/ArithToSPIRV/ArithToSPIRV.cpp  | 22 +++++++++--
 .../arith-to-spirv-le-specific.mlir           | 38 +++++++++++++++++++
 2 files changed, 56 insertions(+), 4 deletions(-)
 create mode 100644 mlir/test/Conversion/ArithToSPIRV/arith-to-spirv-le-specific.mlir

diff --git a/mlir/lib/Conversion/ArithToSPIRV/ArithToSPIRV.cpp b/mlir/lib/Conversion/ArithToSPIRV/ArithToSPIRV.cpp
index 806981728561c..9a1808354e161 100644
--- a/mlir/lib/Conversion/ArithToSPIRV/ArithToSPIRV.cpp
+++ b/mlir/lib/Conversion/ArithToSPIRV/ArithToSPIRV.cpp
@@ -17,6 +17,7 @@
 #include "mlir/Dialect/SPIRV/Transforms/SPIRVConversion.h"
 #include "mlir/IR/BuiltinAttributes.h"
 #include "mlir/IR/BuiltinTypes.h"
+#include "mlir/IR/DialectResourceBlobManager.h"
 #include "llvm/ADT/APInt.h"
 #include "llvm/ADT/ArrayRef.h"
 #include "llvm/ADT/STLExtras.h"
@@ -229,16 +230,29 @@ struct ConstantCompositeOpPattern final
     if (!srcType || srcType.getNumElements() == 1)
       return failure();
 
-    // arith.constant should only have vector or tenor types.
+    // arith.constant should only have vector or tensor types.
     assert((isa<VectorType, RankedTensorType>(srcType)));
 
     Type dstType = getTypeConverter()->convertType(srcType);
     if (!dstType)
       return failure();
 
-    auto dstElementsAttr = dyn_cast<DenseElementsAttr>(constOp.getValue());
-    if (!dstElementsAttr)
-      return failure();
+    // Import the resource into the IR to make use of the special handling of
+    // element types later on.
+    mlir::DenseElementsAttr dstElementsAttr;
+    if (auto denseElementsAttr =
+            dyn_cast<DenseElementsAttr>(constOp.getValue())) {
+      dstElementsAttr = denseElementsAttr;
+    } else if (auto resourceAttr =
+                   dyn_cast<DenseResourceElementsAttr>(constOp.getValue())) {
+
+      ArrayRef<char> ptr = resourceAttr.getRawHandle().getBlob()->getData();
+      dstElementsAttr =
+          DenseElementsAttr::getFromRawBuffer(resourceAttr.getType(), ptr);
+    } else {
+      return rewriter.notifyMatchFailure(constOp,
+                                         "Could not decode ElementsAttr");
+    }
 
     ShapedType dstAttrType = dstElementsAttr.getType();
 
diff --git a/mlir/test/Conversion/ArithToSPIRV/arith-to-spirv-le-specific.mlir b/mlir/test/Conversion/ArithToSPIRV/arith-to-spirv-le-specific.mlir
new file mode 100644
index 0000000000000..7233a8bfffa9d
--- /dev/null
+++ b/mlir/test/Conversion/ArithToSPIRV/arith-to-spirv-le-specific.mlir
@@ -0,0 +1,38 @@
+// RUN: mlir-opt -split-input-file -convert-arith-to-spirv -verify-diagnostics %s | FileCheck %s
+
+
+//===----------------------------------------------------------------------===//
+// arith.constant dense_resource
+//
+// The decoding of dense_resource differs between little and big endian
+// machines. At the moment only litte endian is supported.
+// See https://github.com/llvm/llvm-project/issues/63469 for more infos.
+//
+//===----------------------------------------------------------------------===//
+
+// XFAIL: target=s390x-{{.*}}
+
+module attributes {
+  spirv.target_env = #spirv.target_env<
+    #spirv.vce<v1.0, [Int8, Int16, Int64, Float16, Float64], []>, #spirv.resource_limits<>>
+} {
+func.func @constant_dense_resource() {
+  // CHECK:    %{{.*}} = spirv.Constant dense<[0.203224242, -0.254296064, -0.365104556, -0.469196141, 0.466041982]> : tensor<5xf32> : !spirv.array<5 x f32>
+  %0 = arith.constant dense_resource<dense_resource_test_5xf32> : tensor<5xf32>  
+  // CHECK:    %{{.*}} = spirv.Constant dense<[1, 2]> : vector<2xi32>
+  %1 = arith.constant dense_resource<dense_resource_test_2xi32> : vector<2xi32>  
+  // CHECK:    %{{.*}} = spirv.Constant dense<[0.35476172, 0.351080596, -0.0795008316, 0.366843373]> : tensor<4xf32> : !spirv.array<4 x f32>
+  %2 = arith.constant dense_resource<dense_resource_test_2x2xf32> : tensor<1x2x2xf32>  
+  return
+  }
+}
+// Resources are kept at end of file. New tests should be added above this.
+{-#
+  dialect_resources: {
+    builtin: {
+      dense_resource_test_2xi32: "0x400000000100000002000000",
+      dense_resource_test_5xf32: "0x08000000041A503E183382BEFCEEBABE7A3AF0BE0E9DEE3E",
+      dense_resource_test_2x2xf32: "0x0800000054A3B53ED6C0B33E55D1A2BDE5D2BB3E"
+    }
+  }
+#-}