[llvm-testresults] buildbot failure in smooshlab on clang-x86_64-darwin10-fnt
Bill Wendling
wendling at apple.com
Fri Feb 26 15:43:35 PST 2010
It doesn't use EH, so I can't imagine that it's my fault...
-bw
On Feb 26, 2010, at 3:42 PM, Daniel Dunbar wrote:
> The failing test here is:
> LLC.SingleSource/UnitTests/2005-07-15-Bitfield-ABI
> in the nightly test suite, but I don't understand how that could have
> been caused by the changes, currently.
>
> - Daniel
>
> On Fri, Feb 26, 2010 at 3:10 PM, <daniel_dunbar at apple.com> wrote:
>> The Buildbot has detected a new failure of clang-x86_64-darwin10-fnt on smooshlab.
>> Full details are available at:
>> http://smooshlab.apple.com:8010/builders/clang-x86_64-darwin10-fnt/builds/22
>>
>> Buildbot URL: http://smooshlab.apple.com:8010/
>>
>> Buildslave for this Build: smoosh-11.apple.com
>>
>> Build Reason:
>> Build Source Stamp: 97279
>> Blamelist: johnny,jyasskin,rjmccall,void
>>
>> BUILD FAILED: failed make.test-suite
>>
>> sincerely,
>> -The Buildbot
>>
>>
>> ================================================================================
>>
>> CHANGES:
>> Files:
>> lib/Target/ARM/ARMInstrFormats.td
>> lib/Target/ARM/ARMInstrInfo.td
>> lib/Target/ARM/ARMInstrThumb2.td
>> At: Fri 26 Feb 2010 14:07:53
>> Changed By: johnny
>> Comments: Added the follwoing 32-bit Thumb instructions for disassembly only:
>>
>> o Parallel addition and subtraction, signed/unsigned
>> o Miscellaneous operations: QADD, QDADD, QSUB, QDSUB
>> o Unsigned sum of absolute differences [and accumulate]: USAD8, USADA8
>> o Signed/Unsigned saturate: SSAT, SSAT16, USAT, USAT16
>> o Signed multiply accumulate long (halfwords): SMLAL<x><y>
>> o Signed multiply accumulate/subtract [long] (dual): SMLAD[x], SMLALD[X], SMLSD[X], SMLSLD[X]
>> o Signed dual multiply add/subtract [long]: SMUAD[X], SMUSD[X]
>> Properties:
>>
>>
>>
>>
>> File: lib/CodeGen/AsmPrinter/DwarfException.cpp
>> At: Fri 26 Feb 2010 14:22:56
>> Changed By: void
>> Comments: A much cleaner (and less code!) way of inserting the correct amount of padding
>> for alignment into the LSDA. If the TType base offset is emitted, then put the
>> padding there. Otherwise, put it in the call site table length. There will be no
>> conflict between the two sites when placing the padding in one place.
>> Properties:
>>
>>
>>
>>
>> Files:
>> lib/Support/APFloat.cpp
>> unittests/ADT/APFloatTest.cpp
>> At: Fri 26 Feb 2010 14:22:56
>> Changed By: rjmccall
>> Comments: Make APFloat's string-parsing routines a bit safer against very large exponents.
>>
>> Properties:
>>
>>
>>
>>
>> File: docs/Packaging.html
>> At: Fri 26 Feb 2010 14:27:54
>> Changed By: jyasskin
>> Comments: Test that docs are updating.
>> Properties:
>>
>>
>>
>>
>> LOGS:
>> Last 10 lines of 'stdio':
>> SingleSource/UnitTests/Vector/SSE/sse.shift | 0.0255 880 0.0121 * * | 0.0000 * 0.0000 * * | n/a - n/a n/a
>> SingleSource/UnitTests/Vector/SSE/sse.stepfft | 0.4733 8448 0.3608 * * | 0.7400 * 0.6800 * * | n/a 1.09 n/a n/a
>> SingleSource/UnitTests/Vector/build | 0.0166 1072 0.0243 * * | 0.0000 * 0.0000 * * | n/a - n/a n/a
>> SingleSource/UnitTests/Vector/build2 | 0.0783 1520 0.0379 * * | 1.1700 * 1.6000 * * | n/a 0.73 n/a n/a
>> SingleSource/UnitTests/Vector/divides | 0.0144 720 0.0097 * * | 0.0000 * 0.0000 * * | n/a - n/a n/a
>> SingleSource/UnitTests/Vector/multiplies | 0.1095 2064 0.1055 * * | 0.5500 * 1.4200 * * | n/a 0.39 n/a n/a
>> SingleSource/UnitTests/Vector/simple | 0.0392 1664 0.0398 * * | 0.0000 * 0.0000 * * | n/a - n/a n/a
>> SingleSource/UnitTests/Vector/sumarray | 0.0305 1072 0.0282 * * | 0.0000 * 0.0000 * * | n/a - n/a n/a
>> SingleSource/UnitTests/Vector/sumarray-dbl | 0.0300 1088 0.0319 * * | 0.0000 * 0.0000 * * | n/a - n/a n/a
>> SingleSource/UnitTests/printargs | 0.0137 832 0.0259 * * | 0.0000 * 0.0000 * * | n/a - n/a n/a
>>
>> Last 10 lines of 'report':
>> SingleSource/UnitTests/Vector/SSE/sse.shift | 0.0255 880 0.0121 * * | 0.0000 * 0.0000 * * | n/a - n/a n/a
>> SingleSource/UnitTests/Vector/SSE/sse.stepfft | 0.4733 8448 0.3608 * * | 0.7400 * 0.6800 * * | n/a 1.09 n/a n/a
>> SingleSource/UnitTests/Vector/build | 0.0166 1072 0.0243 * * | 0.0000 * 0.0000 * * | n/a - n/a n/a
>> SingleSource/UnitTests/Vector/build2 | 0.0783 1520 0.0379 * * | 1.1700 * 1.6000 * * | n/a 0.73 n/a n/a
>> SingleSource/UnitTests/Vector/divides | 0.0144 720 0.0097 * * | 0.0000 * 0.0000 * * | n/a - n/a n/a
>> SingleSource/UnitTests/Vector/multiplies | 0.1095 2064 0.1055 * * | 0.5500 * 1.4200 * * | n/a 0.39 n/a n/a
>> SingleSource/UnitTests/Vector/simple | 0.0392 1664 0.0398 * * | 0.0000 * 0.0000 * * | n/a - n/a n/a
>> SingleSource/UnitTests/Vector/sumarray | 0.0305 1072 0.0282 * * | 0.0000 * 0.0000 * * | n/a - n/a n/a
>> SingleSource/UnitTests/Vector/sumarray-dbl | 0.0300 1088 0.0319 * * | 0.0000 * 0.0000 * * | n/a - n/a n/a
>> SingleSource/UnitTests/printargs | 0.0137 832 0.0259 * * | 0.0000 * 0.0000 * * | n/a - n/a n/a
>>
>> Last 10 lines of 'fail.LLC':
>> LLC.SingleSource/UnitTests/2005-07-15-Bitfield-ABI
>>
>> Last 10 lines of 'fail.LLC_compile':
>> LLC_compile.SingleSource/UnitTests/2005-07-15-Bitfield-ABI
>>
>> Last 10 lines of 'xfail.GCCAS':
>> GCCAS.MultiSource/Applications/hbd/hbd
>> GCCAS.MultiSource/Applications/lua/lua
>> GCCAS.MultiSource/Applications/minisat/minisat
>> GCCAS.MultiSource/Benchmarks/Bullet/bullet
>> GCCAS.MultiSource/Benchmarks/MallocBench/espresso/espresso
>> GCCAS.MultiSource/Benchmarks/Prolangs-C++/NP/np
>> GCCAS.MultiSource/Benchmarks/Prolangs-C/cdecl/cdecl
>> GCCAS.SingleSource/UnitTests/2006-12-04-DynAllocAndRestore
>> GCCAS.SingleSource/UnitTests/ObjC/dot-syntax
>> GCCAS.SingleSource/UnitTests/ObjC/parameter-passing
>>
>> Last 10 lines of 'xfail.LLC':
>> LLC.MultiSource/Benchmarks/Prolangs-C/cdecl/cdecl
>> LLC.MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4
>> LLC.SingleSource/Regression/C++/EH/ConditionalExpr
>> LLC.SingleSource/Regression/C++/EH/ctor_dtor_count-2
>> LLC.SingleSource/Regression/C++/EH/function_try_block
>> LLC.SingleSource/UnitTests/2006-12-04-DynAllocAndRestore
>> LLC.SingleSource/UnitTests/ObjC/dot-syntax
>> LLC.SingleSource/UnitTests/ObjC/dot-syntax-2
>> LLC.SingleSource/UnitTests/ObjC/exceptions
>> LLC.SingleSource/UnitTests/ObjC/parameter-passing
>>
>> Last 10 lines of 'xfail.LLC_compile':
>> LLC_compile.MultiSource/Benchmarks/Prolangs-C/cdecl/cdecl
>> LLC_compile.MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4
>> LLC_compile.SingleSource/Regression/C++/EH/ConditionalExpr
>> LLC_compile.SingleSource/Regression/C++/EH/ctor_dtor_count-2
>> LLC_compile.SingleSource/Regression/C++/EH/function_try_block
>> LLC_compile.SingleSource/UnitTests/2006-12-04-DynAllocAndRestore
>> LLC_compile.SingleSource/UnitTests/ObjC/dot-syntax
>> LLC_compile.SingleSource/UnitTests/ObjC/dot-syntax-2
>> LLC_compile.SingleSource/UnitTests/ObjC/exceptions
>> LLC_compile.SingleSource/UnitTests/ObjC/parameter-passing
>>
>> Last 10 lines of 'xfail.Bytecode':
>> Bytecode.MultiSource/Applications/hbd/hbd
>> Bytecode.MultiSource/Applications/lua/lua
>> Bytecode.MultiSource/Applications/minisat/minisat
>> Bytecode.MultiSource/Benchmarks/Bullet/bullet
>> Bytecode.MultiSource/Benchmarks/MallocBench/espresso/espresso
>> Bytecode.MultiSource/Benchmarks/Prolangs-C++/NP/np
>> Bytecode.MultiSource/Benchmarks/Prolangs-C/cdecl/cdecl
>> Bytecode.SingleSource/UnitTests/2006-12-04-DynAllocAndRestore
>> Bytecode.SingleSource/UnitTests/ObjC/dot-syntax
>> Bytecode.SingleSource/UnitTests/ObjC/parameter-passing
>>
>> Last 10 lines of 'xpass.LLC':
>> LLC.SingleSource/Benchmarks/CoyoteBench/fftbench
>> LLC.SingleSource/Benchmarks/Shootout-C++/moments
>>
>> Last 10 lines of 'xpass.LLC_compile':
>> LLC_compile.SingleSource/Benchmarks/CoyoteBench/fftbench
>> LLC_compile.SingleSource/Benchmarks/Shootout-C++/moments
>>
>> _______________________________________________
>> llvm-testresults mailing list
>> llvm-testresults at cs.uiuc.edu
>> http://lists.cs.uiuc.edu/mailman/listinfo/llvm-testresults
>>
More information about the llvm-testresults
mailing list