[llvm-testresults] buildbot failure in smooshlab on clang-x86_64-darwin10-fnt

daniel_dunbar at apple.com daniel_dunbar at apple.com
Fri Feb 26 15:10:34 PST 2010


The Buildbot has detected a new failure of clang-x86_64-darwin10-fnt on smooshlab.
Full details are available at:
 http://smooshlab.apple.com:8010/builders/clang-x86_64-darwin10-fnt/builds/22

Buildbot URL: http://smooshlab.apple.com:8010/

Buildslave for this Build: smoosh-11.apple.com

Build Reason: 
Build Source Stamp: 97279
Blamelist: johnny,jyasskin,rjmccall,void

BUILD FAILED: failed make.test-suite

sincerely,
 -The Buildbot


================================================================================

CHANGES:
Files:
 lib/Target/ARM/ARMInstrFormats.td
 lib/Target/ARM/ARMInstrInfo.td
 lib/Target/ARM/ARMInstrThumb2.td
At: Fri 26 Feb 2010 14:07:53
Changed By: johnny
Comments: Added the follwoing 32-bit Thumb instructions for disassembly only:

o Parallel addition and subtraction, signed/unsigned
o Miscellaneous operations: QADD, QDADD, QSUB, QDSUB
o Unsigned sum of absolute differences [and accumulate]: USAD8, USADA8
o Signed/Unsigned saturate: SSAT, SSAT16, USAT, USAT16
o Signed multiply accumulate long (halfwords): SMLAL<x><y>
o Signed multiply accumulate/subtract [long] (dual): SMLAD[x], SMLALD[X], SMLSD[X], SMLSLD[X]
o Signed dual multiply add/subtract [long]: SMUAD[X], SMUSD[X]
Properties: 




File: lib/CodeGen/AsmPrinter/DwarfException.cpp
At: Fri 26 Feb 2010 14:22:56
Changed By: void
Comments: A much cleaner (and less code!) way of inserting the correct amount of padding
for alignment into the LSDA. If the TType base offset is emitted, then put the
padding there. Otherwise, put it in the call site table length. There will be no
conflict between the two sites when placing the padding in one place.
Properties: 




Files:
 lib/Support/APFloat.cpp
 unittests/ADT/APFloatTest.cpp
At: Fri 26 Feb 2010 14:22:56
Changed By: rjmccall
Comments: Make APFloat's string-parsing routines a bit safer against very large exponents.

Properties: 




File: docs/Packaging.html
At: Fri 26 Feb 2010 14:27:54
Changed By: jyasskin
Comments: Test that docs are updating.
Properties: 




LOGS:
Last 10 lines of 'stdio':
	SingleSource/UnitTests/Vector/SSE/sse.shift                              | 0.0255   880      0.0121      *                *           |  0.0000 *    0.0000 *        *   | n/a     -       n/a          n/a 
	SingleSource/UnitTests/Vector/SSE/sse.stepfft                            | 0.4733   8448     0.3608      *                *           |  0.7400 *    0.6800 *        *   | n/a     1.09    n/a          n/a 
	SingleSource/UnitTests/Vector/build                                      | 0.0166   1072     0.0243      *                *           |  0.0000 *    0.0000 *        *   | n/a     -       n/a          n/a 
	SingleSource/UnitTests/Vector/build2                                     | 0.0783   1520     0.0379      *                *           |  1.1700 *    1.6000 *        *   | n/a     0.73    n/a          n/a 
	SingleSource/UnitTests/Vector/divides                                    | 0.0144   720      0.0097      *                *           |  0.0000 *    0.0000 *        *   | n/a     -       n/a          n/a 
	SingleSource/UnitTests/Vector/multiplies                                 | 0.1095   2064     0.1055      *                *           |  0.5500 *    1.4200 *        *   | n/a     0.39    n/a          n/a 
	SingleSource/UnitTests/Vector/simple                                     | 0.0392   1664     0.0398      *                *           |  0.0000 *    0.0000 *        *   | n/a     -       n/a          n/a 
	SingleSource/UnitTests/Vector/sumarray                                   | 0.0305   1072     0.0282      *                *           |  0.0000 *    0.0000 *        *   | n/a     -       n/a          n/a 
	SingleSource/UnitTests/Vector/sumarray-dbl                               | 0.0300   1088     0.0319      *                *           |  0.0000 *    0.0000 *        *   | n/a     -       n/a          n/a 
	SingleSource/UnitTests/printargs                                         | 0.0137   832      0.0259      *                *           |  0.0000 *    0.0000 *        *   | n/a     -       n/a          n/a 

Last 10 lines of 'report':
	SingleSource/UnitTests/Vector/SSE/sse.shift                              | 0.0255   880      0.0121      *                *           |  0.0000 *    0.0000 *        *   | n/a     -       n/a          n/a 
	SingleSource/UnitTests/Vector/SSE/sse.stepfft                            | 0.4733   8448     0.3608      *                *           |  0.7400 *    0.6800 *        *   | n/a     1.09    n/a          n/a 
	SingleSource/UnitTests/Vector/build                                      | 0.0166   1072     0.0243      *                *           |  0.0000 *    0.0000 *        *   | n/a     -       n/a          n/a 
	SingleSource/UnitTests/Vector/build2                                     | 0.0783   1520     0.0379      *                *           |  1.1700 *    1.6000 *        *   | n/a     0.73    n/a          n/a 
	SingleSource/UnitTests/Vector/divides                                    | 0.0144   720      0.0097      *                *           |  0.0000 *    0.0000 *        *   | n/a     -       n/a          n/a 
	SingleSource/UnitTests/Vector/multiplies                                 | 0.1095   2064     0.1055      *                *           |  0.5500 *    1.4200 *        *   | n/a     0.39    n/a          n/a 
	SingleSource/UnitTests/Vector/simple                                     | 0.0392   1664     0.0398      *                *           |  0.0000 *    0.0000 *        *   | n/a     -       n/a          n/a 
	SingleSource/UnitTests/Vector/sumarray                                   | 0.0305   1072     0.0282      *                *           |  0.0000 *    0.0000 *        *   | n/a     -       n/a          n/a 
	SingleSource/UnitTests/Vector/sumarray-dbl                               | 0.0300   1088     0.0319      *                *           |  0.0000 *    0.0000 *        *   | n/a     -       n/a          n/a 
	SingleSource/UnitTests/printargs                                         | 0.0137   832      0.0259      *                *           |  0.0000 *    0.0000 *        *   | n/a     -       n/a          n/a 

Last 10 lines of 'fail.LLC':
	LLC.SingleSource/UnitTests/2005-07-15-Bitfield-ABI

Last 10 lines of 'fail.LLC_compile':
	LLC_compile.SingleSource/UnitTests/2005-07-15-Bitfield-ABI

Last 10 lines of 'xfail.GCCAS':
	GCCAS.MultiSource/Applications/hbd/hbd
	GCCAS.MultiSource/Applications/lua/lua
	GCCAS.MultiSource/Applications/minisat/minisat
	GCCAS.MultiSource/Benchmarks/Bullet/bullet
	GCCAS.MultiSource/Benchmarks/MallocBench/espresso/espresso
	GCCAS.MultiSource/Benchmarks/Prolangs-C++/NP/np
	GCCAS.MultiSource/Benchmarks/Prolangs-C/cdecl/cdecl
	GCCAS.SingleSource/UnitTests/2006-12-04-DynAllocAndRestore
	GCCAS.SingleSource/UnitTests/ObjC/dot-syntax
	GCCAS.SingleSource/UnitTests/ObjC/parameter-passing

Last 10 lines of 'xfail.LLC':
	LLC.MultiSource/Benchmarks/Prolangs-C/cdecl/cdecl
	LLC.MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4
	LLC.SingleSource/Regression/C++/EH/ConditionalExpr
	LLC.SingleSource/Regression/C++/EH/ctor_dtor_count-2
	LLC.SingleSource/Regression/C++/EH/function_try_block
	LLC.SingleSource/UnitTests/2006-12-04-DynAllocAndRestore
	LLC.SingleSource/UnitTests/ObjC/dot-syntax
	LLC.SingleSource/UnitTests/ObjC/dot-syntax-2
	LLC.SingleSource/UnitTests/ObjC/exceptions
	LLC.SingleSource/UnitTests/ObjC/parameter-passing

Last 10 lines of 'xfail.LLC_compile':
	LLC_compile.MultiSource/Benchmarks/Prolangs-C/cdecl/cdecl
	LLC_compile.MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4
	LLC_compile.SingleSource/Regression/C++/EH/ConditionalExpr
	LLC_compile.SingleSource/Regression/C++/EH/ctor_dtor_count-2
	LLC_compile.SingleSource/Regression/C++/EH/function_try_block
	LLC_compile.SingleSource/UnitTests/2006-12-04-DynAllocAndRestore
	LLC_compile.SingleSource/UnitTests/ObjC/dot-syntax
	LLC_compile.SingleSource/UnitTests/ObjC/dot-syntax-2
	LLC_compile.SingleSource/UnitTests/ObjC/exceptions
	LLC_compile.SingleSource/UnitTests/ObjC/parameter-passing

Last 10 lines of 'xfail.Bytecode':
	Bytecode.MultiSource/Applications/hbd/hbd
	Bytecode.MultiSource/Applications/lua/lua
	Bytecode.MultiSource/Applications/minisat/minisat
	Bytecode.MultiSource/Benchmarks/Bullet/bullet
	Bytecode.MultiSource/Benchmarks/MallocBench/espresso/espresso
	Bytecode.MultiSource/Benchmarks/Prolangs-C++/NP/np
	Bytecode.MultiSource/Benchmarks/Prolangs-C/cdecl/cdecl
	Bytecode.SingleSource/UnitTests/2006-12-04-DynAllocAndRestore
	Bytecode.SingleSource/UnitTests/ObjC/dot-syntax
	Bytecode.SingleSource/UnitTests/ObjC/parameter-passing

Last 10 lines of 'xpass.LLC':
	LLC.SingleSource/Benchmarks/CoyoteBench/fftbench
	LLC.SingleSource/Benchmarks/Shootout-C++/moments

Last 10 lines of 'xpass.LLC_compile':
	LLC_compile.SingleSource/Benchmarks/CoyoteBench/fftbench
	LLC_compile.SingleSource/Benchmarks/Shootout-C++/moments




More information about the llvm-testresults mailing list