[llvm-dev] Tablegen ridiculously slow when compiling for Debug
Chris Bieneman via llvm-dev
llvm-dev at lists.llvm.org
Mon Jul 1 10:34:43 PDT 2019
Hey Joan,
When looking for build support it is really useful to include a bunch of information about your build up front. Knowing that you are on macOS, and using the Xcode generator are really useful.
On macOS, BUILD_SHARED_LIBS won’t really help much because the default linker (ld64) is pretty good. Using an IDE generator and setting LLVM_USE_OPTIMIZED_TABLEGEN will kill your release builds.
In general Xcode takes 2x-3x longer than Ninja for incremental builds, and 1.5x-2x as long for clean builds. Lots of people use the Xcode generator to create a project file for navigation and editing, but most people I know doing LLVM development on macOS use Ninja for their builds.
-Chris
> On Jun 30, 2019, at 12:18 PM, Joan Lluch via llvm-dev <llvm-dev at lists.llvm.org> wrote:
>
> Hi Greg,
>
> I tried to setup Ninja before on my mac but I mush have done something wrong and I didn’t manage to get it work. I’m not familiarised at all with the procedures involved. I may try that again to see If I have some luck though. It’s a pity that LLVM is not particularly friendly with familiar IDEs such as xCode on macs and Visual Studio on windows.
>
> John
>
>> On 30 Jun 2019, at 17:43, Greg Bedwell <gregbedwell at gmail.com> wrote:
>>
>> This is also the case with the Visual Studio generators. Custom commands in a single cmake file essentially get written out line by line into a single batch file that gets processed as a custom build step. In the VS case this means that it can, for example, run X86 and Aarch64 tablegen steps in parallel with each other but all of the individual X86 invocations get processed serially. I can well imagine that the Xcode situation is similar although I've no experience with it myself to know for sure.
>>
>> As previously mentioned, the best solution is probably to try to adjust your workflow to use the Ninja (
>> https://ninja-build.org
>> ) CMake generator if at all possible. It's a bit of an adjustment but it does work very nicely with the LLVM build system.
>>
>> -Greg
>>
>>
>>> On Sun, 30 Jun 2019 at 12:08, Nicolai Hähnle via llvm-dev <llvm-dev at lists.llvm.org> wrote:
>>> Are you saying that the TableGen execution isn't parallelized? That
>>> seems like an obvious Xcode-specific problem...
>>>
>>> The TableGen executions are parallelized with cmake/ninja just fine.
>>>
>>> Cheers,
>>> Nicolai
>>>
>>> On 30.06.19 11:28, Joan Lluch via llvm-dev wrote:
>>> > Hi Praveen,
>>> >
>>> > Thanks for the tip, but Xcode seems to spend all the time running
>>> > tablegen "custom shell scripts", one by one at a time, not linking.
>>> > Linking is actually very fast, possibly less than a second. The
>>> > “scripts” that take longer are “AArch64CommonTableGen" and
>>> > “AMDGPUCommonTableGen”. As said this is on LLVM 9.0.
>>> >
>>> > However, on LLVM 7.0.1, the same process takes just 5-6 seconds in
>>> > total, with individual “scripts” taking significantly less than 1 second
>>> > each. There must be some difference between LLVM 9.0 and LLVM 7.0 that
>>> > might cause this (?)
>>> >
>>> > John
>>> >
>>> >
>>> >> On 30 Jun 2019, at 11:17, Praveen Velliengiri
>>> >> <praveenvelliengiri at gmail.com <mailto:praveenvelliengiri at gmail.com>>
>>> >> wrote:
>>> >>
>>> >> *
>>> >> *
>>> >> cmake *BUILD_SHARED_LIBS* option, it builds llvm as .so not as .a. It
>>> >> will use less memory during linking so you can increase the link
>>> >> threads and your build time will be lesser.
>>> >> Check this in : https://llvm.org/docs/CMake.html
>>> >>
>>> >> **
>>> >> **
>>> >>
>>> >> On Sun, 30 Jun 2019 at 14:42, Joan Lluch <joan.lluch at icloud.com
>>> >> <mailto:joan.lluch at icloud.com>> wrote:
>>> >>
>>> >> Hi Praveen,
>>> >>
>>> >> Please, can you elaborate on this?. What do do mean by “building
>>> >> as shared objects”.
>>> >>
>>> >> Thanks,
>>> >>
>>> >> John
>>> >>
>>> >>
>>> >>
>>> >>> On 30 Jun 2019, at 07:32, Praveen Velliengiri
>>> >>> <praveenvelliengiri at gmail.com
>>> >>> <mailto:praveenvelliengiri at gmail.com>> wrote:
>>> >>>
>>> >>> Maybe try building llvm as a shared objects..
>>> >>>
>>> >>> On Jun 30, 2019 1:30 AM, "Joan Lluch via llvm-dev"
>>> >>> <llvm-dev at lists.llvm.org <mailto:llvm-dev at lists.llvm.org>> wrote:
>>> >>>
>>> >>> Hi Florian,
>>> >>>
>>> >>> Ok, I ran this:
>>> >>>
>>> >>> cmake -S LLVM -DCMAKE_INSTALL_PREFIX=INSTALL
>>> >>> -DLLVM_OPTIMIZED_TABLEGEN=On -G Xcode
>>> >>>
>>> >>> Compiled it again from clean, and the situation is worse than
>>> >>> before. Incremental builds take an incredible amount of time
>>> >>> stuck in running Tablegen scripts for all targets. Now this
>>> >>> happens both in Release and Debug configurations. Just before
>>> >>> this, at least Release compiled fine, but that’s no longer
>>> >>> the case.
>>> >>>
>>> >>> Any other suggestions? What could actually cause this?
>>> >>>
>>> >>> Thanks
>>> >>> John
>>> >>>
>>> >>>
>>> >>>
>>> >>>> On 29 Jun 2019, at 19:37, Florian Hahn
>>> >>>> <florian_hahn at apple.com <mailto:florian_hahn at apple.com>> wrote:
>>> >>>>
>>> >>>> Hi,
>>> >>>>
>>> >>>>> On Jun 29, 2019, at 18:26, Joan Lluch via llvm-dev
>>> >>>>> <llvm-dev at lists.llvm.org <mailto:llvm-dev at lists.llvm.org>>
>>> >>>>> wrote:
>>> >>>>>
>>> >>>>> Hi all,
>>> >>>>>
>>> >>>>> On LLVM version 7.0.1, incremental builds are very fast for
>>> >>>>> both Release and Debug. I’m compiling with Xcode
>>> >>>>>
>>> >>>>> I recently downloaded LLVM 9.0 from the LLVM-mirror Github
>>> >>>>> repository and found that Incremental "Debug” builds take a
>>> >>>>> ridiculously long time due to Tablegen taking ages
>>> >>>>> (literally more than 10 minutes) to generate files. This
>>> >>>>> makes it totally unusable for debug purposes. However,
>>> >>>>> incremental ‘Release’ builds only take a few seconds.
>>> >>>>>
>>> >>>>> Why is that?. Any suggestions?.
>>> >>>>
>>> >>>>
>>> >>>>
>>> >>>> You could give setting LLVM_OPTIMIZED_TABLEGEN a try
>>> >>>> (https://llvm.org/docs/CMake.html).
>>> >>>>
>>> >>>> Cheers,
>>> >>>> Florian
>>> >>>
>>> >>>
>>> >>> _______________________________________________
>>> >>> LLVM Developers mailing list
>>> >>> llvm-dev at lists.llvm.org <mailto:llvm-dev at lists.llvm.org>
>>> >>> https://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev
>>> >>>
>>> >>
>>> >
>>> >
>>> > _______________________________________________
>>> > LLVM Developers mailing list
>>> > llvm-dev at lists.llvm.org
>>> > https://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev
>>> >
>>>
>>> --
>>> Lerne, wie die Welt wirklich ist,
>>> Aber vergiss niemals, wie sie sein sollte.
>>> _______________________________________________
>>> LLVM Developers mailing list
>>> llvm-dev at lists.llvm.org
>>> https://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev
>
> _______________________________________________
> LLVM Developers mailing list
> llvm-dev at lists.llvm.org
> https://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.llvm.org/pipermail/llvm-dev/attachments/20190701/bb5708d7/attachment.html>
More information about the llvm-dev
mailing list