[llvm] r361881 - Revert "[CorrelatedValuePropagation] Fix prof branch_weights metadata handling for SwitchInst"

Nikita Popov via llvm-commits llvm-commits at lists.llvm.org
Tue May 28 14:28:25 PDT 2019


Author: nikic
Date: Tue May 28 14:28:24 2019
New Revision: 361881

URL: http://llvm.org/viewvc/llvm-project?rev=361881&view=rev
Log:
Revert "[CorrelatedValuePropagation] Fix prof branch_weights metadata handling for SwitchInst"

This reverts commit 53f2f3286572cb879b3861d7c15480e4d830dd3b.

As reported on D62126, this causes assertion failures if the switch
has incorrect branch_weights metadata, which may happen as a result
of other transforms not handling it correctly yet.

Removed:
    llvm/trunk/test/Transforms/CorrelatedValuePropagation/profmd.ll
Modified:
    llvm/trunk/lib/Transforms/Scalar/CorrelatedValuePropagation.cpp

Modified: llvm/trunk/lib/Transforms/Scalar/CorrelatedValuePropagation.cpp
URL: http://llvm.org/viewvc/llvm-project/llvm/trunk/lib/Transforms/Scalar/CorrelatedValuePropagation.cpp?rev=361881&r1=361880&r2=361881&view=diff
==============================================================================
--- llvm/trunk/lib/Transforms/Scalar/CorrelatedValuePropagation.cpp (original)
+++ llvm/trunk/lib/Transforms/Scalar/CorrelatedValuePropagation.cpp Tue May 28 14:28:24 2019
@@ -306,11 +306,11 @@ static bool processCmp(CmpInst *Cmp, Laz
 /// that cannot fire no matter what the incoming edge can safely be removed. If
 /// a case fires on every incoming edge then the entire switch can be removed
 /// and replaced with a branch to the case destination.
-static bool processSwitch(SwitchInst *I, LazyValueInfo *LVI,
+static bool processSwitch(SwitchInst *SI, LazyValueInfo *LVI,
                           DominatorTree *DT) {
   DomTreeUpdater DTU(*DT, DomTreeUpdater::UpdateStrategy::Lazy);
-  Value *Cond = I->getCondition();
-  BasicBlock *BB = I->getParent();
+  Value *Cond = SI->getCondition();
+  BasicBlock *BB = SI->getParent();
 
   // If the condition was defined in same block as the switch then LazyValueInfo
   // currently won't say anything useful about it, though in theory it could.
@@ -327,72 +327,67 @@ static bool processSwitch(SwitchInst *I,
   for (auto *Succ : successors(BB))
     SuccessorsCount[Succ]++;
 
-  { // Scope for SwitchInstProfUpdateWrapper. It must not live during
-    // ConstantFoldTerminator() as the underlying SwitchInst can be changed.
-    SwitchInstProfUpdateWrapper SI(*I);
-
-    for (auto CI = SI->case_begin(), CE = SI->case_end(); CI != CE;) {
-      ConstantInt *Case = CI->getCaseValue();
-
-      // Check to see if the switch condition is equal to/not equal to the case
-      // value on every incoming edge, equal/not equal being the same each time.
-      LazyValueInfo::Tristate State = LazyValueInfo::Unknown;
-      for (pred_iterator PI = PB; PI != PE; ++PI) {
-        // Is the switch condition equal to the case value?
-        LazyValueInfo::Tristate Value = LVI->getPredicateOnEdge(CmpInst::ICMP_EQ,
-                                                                Cond, Case, *PI,
-                                                                BB, SI);
-        // Give up on this case if nothing is known.
-        if (Value == LazyValueInfo::Unknown) {
-          State = LazyValueInfo::Unknown;
-          break;
-        }
-
-        // If this was the first edge to be visited, record that all other edges
-        // need to give the same result.
-        if (PI == PB) {
-          State = Value;
-          continue;
-        }
-
-        // If this case is known to fire for some edges and known not to fire for
-        // others then there is nothing we can do - give up.
-        if (Value != State) {
-          State = LazyValueInfo::Unknown;
-          break;
-        }
+  for (auto CI = SI->case_begin(), CE = SI->case_end(); CI != CE;) {
+    ConstantInt *Case = CI->getCaseValue();
+
+    // Check to see if the switch condition is equal to/not equal to the case
+    // value on every incoming edge, equal/not equal being the same each time.
+    LazyValueInfo::Tristate State = LazyValueInfo::Unknown;
+    for (pred_iterator PI = PB; PI != PE; ++PI) {
+      // Is the switch condition equal to the case value?
+      LazyValueInfo::Tristate Value = LVI->getPredicateOnEdge(CmpInst::ICMP_EQ,
+                                                              Cond, Case, *PI,
+                                                              BB, SI);
+      // Give up on this case if nothing is known.
+      if (Value == LazyValueInfo::Unknown) {
+        State = LazyValueInfo::Unknown;
+        break;
       }
 
-      if (State == LazyValueInfo::False) {
-        // This case never fires - remove it.
-        BasicBlock *Succ = CI->getCaseSuccessor();
-        Succ->removePredecessor(BB);
-        CI = SI.removeCase(CI);
-        CE = SI->case_end();
-
-        // The condition can be modified by removePredecessor's PHI simplification
-        // logic.
-        Cond = SI->getCondition();
-
-        ++NumDeadCases;
-        Changed = true;
-        if (--SuccessorsCount[Succ] == 0)
-          DTU.applyUpdatesPermissive({{DominatorTree::Delete, BB, Succ}});
+      // If this was the first edge to be visited, record that all other edges
+      // need to give the same result.
+      if (PI == PB) {
+        State = Value;
         continue;
       }
-      if (State == LazyValueInfo::True) {
-        // This case always fires.  Arrange for the switch to be turned into an
-        // unconditional branch by replacing the switch condition with the case
-        // value.
-        SI->setCondition(Case);
-        NumDeadCases += SI->getNumCases();
-        Changed = true;
+
+      // If this case is known to fire for some edges and known not to fire for
+      // others then there is nothing we can do - give up.
+      if (Value != State) {
+        State = LazyValueInfo::Unknown;
         break;
       }
+    }
 
-      // Increment the case iterator since we didn't delete it.
-      ++CI;
+    if (State == LazyValueInfo::False) {
+      // This case never fires - remove it.
+      BasicBlock *Succ = CI->getCaseSuccessor();
+      Succ->removePredecessor(BB);
+      CI = SI->removeCase(CI);
+      CE = SI->case_end();
+
+      // The condition can be modified by removePredecessor's PHI simplification
+      // logic.
+      Cond = SI->getCondition();
+
+      ++NumDeadCases;
+      Changed = true;
+      if (--SuccessorsCount[Succ] == 0)
+        DTU.applyUpdatesPermissive({{DominatorTree::Delete, BB, Succ}});
+      continue;
+    }
+    if (State == LazyValueInfo::True) {
+      // This case always fires.  Arrange for the switch to be turned into an
+      // unconditional branch by replacing the switch condition with the case
+      // value.
+      SI->setCondition(Case);
+      NumDeadCases += SI->getNumCases();
+      Changed = true;
+      break;
     }
+
+    // Increment the case iterator since we didn't delete it.
+    ++CI;
   }
 
   if (Changed)

Removed: llvm/trunk/test/Transforms/CorrelatedValuePropagation/profmd.ll
URL: http://llvm.org/viewvc/llvm-project/llvm/trunk/test/Transforms/CorrelatedValuePropagation/profmd.ll?rev=361880&view=auto
==============================================================================
--- llvm/trunk/test/Transforms/CorrelatedValuePropagation/profmd.ll (original)
+++ llvm/trunk/test/Transforms/CorrelatedValuePropagation/profmd.ll (removed)
@@ -1,119 +0,0 @@
-; RUN: opt < %s -correlated-propagation -S | FileCheck %s
-
-; Removed several cases from switch.
-define i32 @switch1(i32 %s) {
-; CHECK-LABEL: @switch1(
-; CHECK-NEXT:  entry:
-; CHECK-NEXT:    [[CMP:%.*]] = icmp slt i32 [[S:%.*]], 0
-; CHECK-NEXT:    br i1 [[CMP]], label [[NEGATIVE:%.*]], label [[OUT:%.*]]
-;
-entry:
-  %cmp = icmp slt i32 %s, 0
-  br i1 %cmp, label %negative, label %out
-
-negative:
-; CHECK:       negative:
-; CHECK-NEXT:    switch i32 [[S]], label [[OUT]] [
-; CHECK-NEXT:    i32 -2, label [[NEXT:%.*]]
-; CHECK-NEXT:    i32 -1, label [[NEXT]]
-  switch i32 %s, label %out [
-  i32 0, label %out
-  i32 1, label %out
-  i32 -1, label %next
-  i32 -2, label %next
-  i32 2, label %out
-  i32 3, label %out
-; CHECK-NEXT: !prof ![[MD0:[0-9]+]]
-  ], !prof !{!"branch_weights", i32 99, i32 1, i32 2, i32 3, i32 4, i32 5, i32 6}
-
-out:
-  %p = phi i32 [ 1, %entry ], [ -1, %negative ], [ -1, %negative ], [ -1, %negative ], [ -1, %negative ], [ -1, %negative ]
-  ret i32 %p
-
-next:
-  %q = phi i32 [ 0, %negative ], [ 0, %negative ]
-  ret i32 %q
-}
-
-; Removed all cases from switch.
-define i32 @switch2(i32 %s) {
-; CHECK-LABEL: @switch2(
-; CHECK-NEXT:  entry:
-; CHECK-NEXT:    [[CMP:%.*]] = icmp sgt i32 [[S:%.*]], 0
-; CHECK-NEXT:    br i1 [[CMP]], label [[POSITIVE:%.*]], label [[OUT:%.*]]
-;
-entry:
-  %cmp = icmp sgt i32 %s, 0
-  br i1 %cmp, label %positive, label %out
-
-positive:
-  switch i32 %s, label %out [
-  i32 0, label %out
-  i32 -1, label %next
-  i32 -2, label %next
-  ], !prof !{!"branch_weights", i32 99, i32 1, i32 2, i32 3}
-
-out:
-  %p = phi i32 [ -1, %entry ], [ 1, %positive ], [ 1, %positive ]
-  ret i32 %p
-
-next:
-  %q = phi i32 [ 0, %positive ], [ 0, %positive ]
-  ret i32 %q
-}
-
-; Change switch into conditional branch.
-define i32 @switch3(i32 %s) {
-; CHECK-LABEL: @switch3(
-;
-entry:
-  %cmp = icmp sgt i32 %s, 0
-  br i1 %cmp, label %positive, label %out
-
-positive:
-; CHECK:      positive:
-; CHECK-NEXT:    [[CMP:%.*]] = icmp eq i32 %s, 1
-; CHECK-NEXT:    br i1 [[CMP]], label [[NEXT:%.*]], label [[OUT:%.*]], !prof ![[MD1:[0-9]+]]
-  switch i32 %s, label %out [
-  i32 1, label %next
-  i32 -1, label %next
-  i32 -2, label %next
-  ], !prof !{!"branch_weights", i32 99, i32 1, i32 2, i32 3}
-
-out:
-  %p = phi i32 [ -1, %entry ], [ 1, %positive ]
-  ret i32 %p
-
-next:
-  %q = phi i32 [ 0, %positive ], [ 0, %positive ], [ 0, %positive ]
-  ret i32 %q
-}
-
-; Removed all cases from switch.
-define i32 @switch4(i32 %s) {
-; CHECK-LABEL: @switch4(
-; CHECK-NEXT:  entry:
-; CHECK-NEXT:    [[CMP:%.*]] = icmp slt i32 [[S:%.*]], 0
-; CHECK-NEXT:    br i1 [[CMP]], label [[NEGATIVE:%.*]], label [[OUT:%.*]]
-;
-entry:
-  %cmp = icmp slt i32 %s, 0
-  br i1 %cmp, label %negative, label %out
-
-negative:
-; CHECK:       negative:
-; CHECK-NEXT:    br label %out
-  switch i32 %s, label %out [
-  i32 0, label %out
-  i32 1, label %out
-  i32 2, label %out
-  i32 3, label %out
-  ], !prof !{!"branch_weights", i32 99, i32 1, i32 2, i32 3, i32 4}
-
-out:
-  %p = phi i32 [ 1, %entry ], [ -1, %negative ], [ -1, %negative ], [ -1, %negative ], [ -1, %negative ], [ -1, %negative ]
-  ret i32 %p
-}
-
-; CHECK: ![[MD0]] = !{!"branch_weights", i32 99, i32 4, i32 3}
-; CHECK: ![[MD1]] = !{!"branch_weights", i32 1, i32 99}




More information about the llvm-commits mailing list