[llvm] r356629 - Fix Mach-O bind and rebase validation errors in libObject
Michael Trent via llvm-commits
llvm-commits at lists.llvm.org
Wed Mar 20 16:21:16 PDT 2019
Author: mtrent
Date: Wed Mar 20 16:21:16 2019
New Revision: 356629
URL: http://llvm.org/viewvc/llvm-project?rev=356629&view=rev
Log:
Fix Mach-O bind and rebase validation errors in libObject
Summary:
llvm-objdump (via libObject) validates DYLD_INFO rebase and bind
entries against the basic structure found in the Mach-O file before
evaluating the contents of those entries. Certain malformed Mach-Os can
defeat the validation check and force llvm-objdump (libObject) to crash.
The previous logic verified a rebase or bind started in a valid Mach-O
section, but did not verify that the section wholely contained the
fixup. It also generally allows rebases or binds to start immediately
after a valid section even if that range is not itself part of a valid
section. Finally, bind and rebase opcodes that indicate more than one
fixup (apply N times...) are not completely validated: only the first
and final fixups are checked.
The previous logic also rejected certain binaries as false positives.
Some bind and rebase opcodes can modify the state machine such that the
next bind or rebase will fail. libObject will reject these opcodes as
invalid in order to be helpful and print an error message associated
with the instruction that caused the problem, even though the binary is
not actually illegal until it consumes the invalid state in the state
machine. In other words, libObject may reject a Mach-O binary that
Apple's dynamic linker may consider legal. The original version of
macho-rebase-add-addr-uleb-too-big is an example of such a binary.
I have replaced the existing checkSegAndOffset and checkCountAndSkip
functions with a single function, checkSegAndOffsets, which validates
all of the fixups realized by a DYLD_INFO opcode. checkSegAndOffsets
verifies that a Mach-O section fully contains each fixup. Every fixup
realized by an opcode is validated, and some (but not all!)
inconsistencies in the state machine are allowed until a fixup is
realized. This means that libObject may fail on an opcode that realizes
a fixup, not on the opcode that introduced the arithmetic error.
Existing test cases have been modified to reflect the changes in error
messages returned by libObject. What's more, the test case for
macho-rebase-add-addr-uleb-too-big has been modified so that it actually
triggers the error condition; the new code in libObject considers the
original test binary "legal".
rdar://47797757
Reviewers: lhames, pete, ab
Reviewed By: pete
Subscribers: rupprecht, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59574
Modified:
llvm/trunk/include/llvm/Object/MachO.h
llvm/trunk/lib/Object/MachOObjectFile.cpp
llvm/trunk/test/tools/llvm-objdump/Inputs/macho-rebase-add-addr-uleb-too-big
llvm/trunk/test/tools/llvm-objdump/macho-bad-bind.test
Modified: llvm/trunk/include/llvm/Object/MachO.h
URL: http://llvm.org/viewvc/llvm-project/llvm/trunk/include/llvm/Object/MachO.h?rev=356629&r1=356628&r2=356629&view=diff
==============================================================================
--- llvm/trunk/include/llvm/Object/MachO.h (original)
+++ llvm/trunk/include/llvm/Object/MachO.h Wed Mar 20 16:21:16 2019
@@ -133,11 +133,9 @@ public:
BindRebaseSegInfo(const MachOObjectFile *Obj);
// Used to check a Mach-O Bind or Rebase entry for errors when iterating.
- const char *checkSegAndOffset(int32_t SegIndex, uint64_t SegOffset,
- bool endInvalid);
- const char *checkCountAndSkip(uint32_t Count, uint32_t Skip,
- uint8_t PointerSize, int32_t SegIndex,
- uint64_t SegOffset);
+ const char* checkSegAndOffsets(int32_t SegIndex, uint64_t SegOffset,
+ uint8_t PointerSize, uint32_t Count=1,
+ uint32_t Skip=0);
// Used with valid SegIndex/SegOffset values from checked entries.
StringRef segmentName(int32_t SegIndex);
StringRef sectionName(int32_t SegIndex, uint64_t SegOffset);
@@ -412,36 +410,32 @@ public:
bool is64,
MachOBindEntry::Kind);
- /// For use with a SegIndex,SegOffset pair in MachOBindEntry::moveNext() to
- /// validate a MachOBindEntry.
- const char *BindEntryCheckSegAndOffset(int32_t SegIndex, uint64_t SegOffset,
- bool endInvalid) const {
- return BindRebaseSectionTable->checkSegAndOffset(SegIndex, SegOffset,
- endInvalid);
- }
- /// For use in MachOBindEntry::moveNext() to validate a MachOBindEntry for
- /// the BIND_OPCODE_DO_BIND_ULEB_TIMES_SKIPPING_ULEB opcode.
- const char *BindEntryCheckCountAndSkip(uint32_t Count, uint32_t Skip,
- uint8_t PointerSize, int32_t SegIndex,
- uint64_t SegOffset) const {
- return BindRebaseSectionTable->checkCountAndSkip(Count, Skip, PointerSize,
- SegIndex, SegOffset);
+ // Given a SegIndex, SegOffset, and PointerSize, verify a valid section exists
+ // that fully contains a pointer at that location. Multiple fixups in a bind
+ // (such as with the BIND_OPCODE_DO_BIND_ULEB_TIMES_SKIPPING_ULEB opcode) can
+ // be tested via the Count and Skip parameters.
+ //
+ // This is used by MachOBindEntry::moveNext() to validate a MachOBindEntry.
+ const char *BindEntryCheckSegAndOffsets(int32_t SegIndex, uint64_t SegOffset,
+ uint8_t PointerSize, uint32_t Count=1,
+ uint32_t Skip=0) const {
+ return BindRebaseSectionTable->checkSegAndOffsets(SegIndex, SegOffset,
+ PointerSize, Count, Skip);
}
- /// For use with a SegIndex,SegOffset pair in MachORebaseEntry::moveNext() to
- /// validate a MachORebaseEntry.
- const char *RebaseEntryCheckSegAndOffset(int32_t SegIndex, uint64_t SegOffset,
- bool endInvalid) const {
- return BindRebaseSectionTable->checkSegAndOffset(SegIndex, SegOffset,
- endInvalid);
- }
- /// For use in MachORebaseEntry::moveNext() to validate a MachORebaseEntry for
- /// the REBASE_OPCODE_DO_*_TIMES* opcodes.
- const char *RebaseEntryCheckCountAndSkip(uint32_t Count, uint32_t Skip,
- uint8_t PointerSize, int32_t SegIndex,
- uint64_t SegOffset) const {
- return BindRebaseSectionTable->checkCountAndSkip(Count, Skip, PointerSize,
- SegIndex, SegOffset);
+ // Given a SegIndex, SegOffset, and PointerSize, verify a valid section exists
+ // that fully contains a pointer at that location. Multiple fixups in a rebase
+ // (such as with the REBASE_OPCODE_DO_*_TIMES* opcodes) can be tested via the
+ // Count and Skip parameters.
+ //
+ // This is used by MachORebaseEntry::moveNext() to validate a MachORebaseEntry
+ const char *RebaseEntryCheckSegAndOffsets(int32_t SegIndex,
+ uint64_t SegOffset,
+ uint8_t PointerSize,
+ uint32_t Count=1,
+ uint32_t Skip=0) const {
+ return BindRebaseSectionTable->checkSegAndOffsets(SegIndex, SegOffset,
+ PointerSize, Count, Skip);
}
/// For use with the SegIndex of a checked Mach-O Bind or Rebase entry to
Modified: llvm/trunk/lib/Object/MachOObjectFile.cpp
URL: http://llvm.org/viewvc/llvm-project/llvm/trunk/lib/Object/MachOObjectFile.cpp?rev=356629&r1=356628&r2=356629&view=diff
==============================================================================
--- llvm/trunk/lib/Object/MachOObjectFile.cpp (original)
+++ llvm/trunk/lib/Object/MachOObjectFile.cpp Wed Mar 20 16:21:16 2019
@@ -3120,8 +3120,8 @@ void MachORebaseEntry::moveNext() {
moveToEnd();
return;
}
- error = O->RebaseEntryCheckSegAndOffset(SegmentIndex, SegmentOffset,
- true);
+ error = O->RebaseEntryCheckSegAndOffsets(SegmentIndex, SegmentOffset,
+ PointerSize);
if (error) {
*E = malformedError("for REBASE_OPCODE_SET_SEGMENT_AND_OFFSET_ULEB " +
Twine(error) + " for opcode at: 0x" +
@@ -3145,8 +3145,8 @@ void MachORebaseEntry::moveNext() {
moveToEnd();
return;
}
- error = O->RebaseEntryCheckSegAndOffset(SegmentIndex, SegmentOffset,
- true);
+ error = O->RebaseEntryCheckSegAndOffsets(SegmentIndex, SegmentOffset,
+ PointerSize);
if (error) {
*E = malformedError("for REBASE_OPCODE_ADD_ADDR_ULEB " + Twine(error) +
" for opcode at: 0x" +
@@ -3160,8 +3160,8 @@ void MachORebaseEntry::moveNext() {
SegmentOffset) << "\n");
break;
case MachO::REBASE_OPCODE_ADD_ADDR_IMM_SCALED:
- error = O->RebaseEntryCheckSegAndOffset(SegmentIndex, SegmentOffset,
- true);
+ error = O->RebaseEntryCheckSegAndOffsets(SegmentIndex, SegmentOffset,
+ PointerSize);
if (error) {
*E = malformedError("for REBASE_OPCODE_ADD_ADDR_IMM_SCALED " +
Twine(error) + " for opcode at: 0x" +
@@ -3170,8 +3170,8 @@ void MachORebaseEntry::moveNext() {
return;
}
SegmentOffset += ImmValue * PointerSize;
- error = O->RebaseEntryCheckSegAndOffset(SegmentIndex, SegmentOffset,
- false);
+ error = O->RebaseEntryCheckSegAndOffsets(SegmentIndex, SegmentOffset,
+ PointerSize);
if (error) {
*E =
malformedError("for REBASE_OPCODE_ADD_ADDR_IMM_SCALED "
@@ -3187,15 +3187,6 @@ void MachORebaseEntry::moveNext() {
SegmentOffset) << "\n");
break;
case MachO::REBASE_OPCODE_DO_REBASE_IMM_TIMES:
- error = O->RebaseEntryCheckSegAndOffset(SegmentIndex, SegmentOffset,
- true);
- if (error) {
- *E = malformedError("for REBASE_OPCODE_DO_REBASE_IMM_TIMES " +
- Twine(error) + " for opcode at: 0x" +
- Twine::utohexstr(OpcodeStart - Opcodes.begin()));
- moveToEnd();
- return;
- }
AdvanceAmount = PointerSize;
Skip = 0;
Count = ImmValue;
@@ -3203,8 +3194,8 @@ void MachORebaseEntry::moveNext() {
RemainingLoopCount = ImmValue - 1;
else
RemainingLoopCount = 0;
- error = O->RebaseEntryCheckCountAndSkip(Count, Skip, PointerSize,
- SegmentIndex, SegmentOffset);
+ error = O->RebaseEntryCheckSegAndOffsets(SegmentIndex, SegmentOffset,
+ PointerSize, Count, Skip);
if (error) {
*E = malformedError("for REBASE_OPCODE_DO_REBASE_IMM_TIMES " +
Twine(error) + " for opcode at: 0x" +
@@ -3221,15 +3212,6 @@ void MachORebaseEntry::moveNext() {
<< "\n");
return;
case MachO::REBASE_OPCODE_DO_REBASE_ULEB_TIMES:
- error = O->RebaseEntryCheckSegAndOffset(SegmentIndex, SegmentOffset,
- true);
- if (error) {
- *E = malformedError("for REBASE_OPCODE_DO_REBASE_ULEB_TIMES " +
- Twine(error) + " for opcode at: 0x" +
- Twine::utohexstr(OpcodeStart - Opcodes.begin()));
- moveToEnd();
- return;
- }
AdvanceAmount = PointerSize;
Skip = 0;
Count = readULEB128(&error);
@@ -3244,8 +3226,8 @@ void MachORebaseEntry::moveNext() {
RemainingLoopCount = Count - 1;
else
RemainingLoopCount = 0;
- error = O->RebaseEntryCheckCountAndSkip(Count, Skip, PointerSize,
- SegmentIndex, SegmentOffset);
+ error = O->RebaseEntryCheckSegAndOffsets(SegmentIndex, SegmentOffset,
+ PointerSize, Count, Skip);
if (error) {
*E = malformedError("for REBASE_OPCODE_DO_REBASE_ULEB_TIMES " +
Twine(error) + " for opcode at: 0x" +
@@ -3262,15 +3244,6 @@ void MachORebaseEntry::moveNext() {
<< "\n");
return;
case MachO::REBASE_OPCODE_DO_REBASE_ADD_ADDR_ULEB:
- error = O->RebaseEntryCheckSegAndOffset(SegmentIndex, SegmentOffset,
- true);
- if (error) {
- *E = malformedError("for REBASE_OPCODE_DO_REBASE_ADD_ADDR_ULEB " +
- Twine(error) + " for opcode at: 0x" +
- Twine::utohexstr(OpcodeStart - Opcodes.begin()));
- moveToEnd();
- return;
- }
Skip = readULEB128(&error);
if (error) {
*E = malformedError("for REBASE_OPCODE_DO_REBASE_ADD_ADDR_ULEB " +
@@ -3282,8 +3255,8 @@ void MachORebaseEntry::moveNext() {
AdvanceAmount = Skip + PointerSize;
Count = 1;
RemainingLoopCount = 0;
- error = O->RebaseEntryCheckCountAndSkip(Count, Skip, PointerSize,
- SegmentIndex, SegmentOffset);
+ error = O->RebaseEntryCheckSegAndOffsets(SegmentIndex, SegmentOffset,
+ PointerSize, Count, Skip);
if (error) {
*E = malformedError("for REBASE_OPCODE_DO_REBASE_ADD_ADDR_ULEB " +
Twine(error) + " for opcode at: 0x" +
@@ -3300,16 +3273,6 @@ void MachORebaseEntry::moveNext() {
<< "\n");
return;
case MachO::REBASE_OPCODE_DO_REBASE_ULEB_TIMES_SKIPPING_ULEB:
- error = O->RebaseEntryCheckSegAndOffset(SegmentIndex, SegmentOffset,
- true);
- if (error) {
- *E = malformedError("for REBASE_OPCODE_DO_REBASE_ULEB_TIMES_SKIPPING_"
- "ULEB " +
- Twine(error) + " for opcode at: 0x" +
- Twine::utohexstr(OpcodeStart - Opcodes.begin()));
- moveToEnd();
- return;
- }
Count = readULEB128(&error);
if (error) {
*E = malformedError("for REBASE_OPCODE_DO_REBASE_ULEB_TIMES_SKIPPING_"
@@ -3334,8 +3297,8 @@ void MachORebaseEntry::moveNext() {
}
AdvanceAmount = Skip + PointerSize;
- error = O->RebaseEntryCheckCountAndSkip(Count, Skip, PointerSize,
- SegmentIndex, SegmentOffset);
+ error = O->RebaseEntryCheckSegAndOffsets(SegmentIndex, SegmentOffset,
+ PointerSize, Count, Skip);
if (error) {
*E = malformedError("for REBASE_OPCODE_DO_REBASE_ULEB_TIMES_SKIPPING_"
"ULEB " +
@@ -3642,7 +3605,8 @@ void MachOBindEntry::moveNext() {
moveToEnd();
return;
}
- error = O->BindEntryCheckSegAndOffset(SegmentIndex, SegmentOffset, true);
+ error = O->BindEntryCheckSegAndOffsets(SegmentIndex, SegmentOffset,
+ PointerSize);
if (error) {
*E = malformedError("for BIND_OPCODE_SET_SEGMENT_AND_OFFSET_ULEB " +
Twine(error) + " for opcode at: 0x" +
@@ -3666,7 +3630,8 @@ void MachOBindEntry::moveNext() {
moveToEnd();
return;
}
- error = O->BindEntryCheckSegAndOffset(SegmentIndex, SegmentOffset, true);
+ error = O->BindEntryCheckSegAndOffsets(SegmentIndex, SegmentOffset,
+ PointerSize);
if (error) {
*E = malformedError("for BIND_OPCODE_ADD_ADDR_ULEB " + Twine(error) +
" for opcode at: 0x" +
@@ -3682,7 +3647,8 @@ void MachOBindEntry::moveNext() {
case MachO::BIND_OPCODE_DO_BIND:
AdvanceAmount = PointerSize;
RemainingLoopCount = 0;
- error = O->BindEntryCheckSegAndOffset(SegmentIndex, SegmentOffset, true);
+ error = O->BindEntryCheckSegAndOffsets(SegmentIndex, SegmentOffset,
+ PointerSize);
if (error) {
*E = malformedError("for BIND_OPCODE_DO_BIND " + Twine(error) +
" for opcode at: 0x" +
@@ -3719,7 +3685,8 @@ void MachOBindEntry::moveNext() {
moveToEnd();
return;
}
- error = O->BindEntryCheckSegAndOffset(SegmentIndex, SegmentOffset, true);
+ error = O->BindEntryCheckSegAndOffsets(SegmentIndex, SegmentOffset,
+ PointerSize);
if (error) {
*E = malformedError("for BIND_OPCODE_DO_BIND_ADD_ADDR_ULEB " +
Twine(error) + " for opcode at: 0x" +
@@ -3755,8 +3722,8 @@ void MachOBindEntry::moveNext() {
// Note, this is not really an error until the next bind but make no sense
// for a BIND_OPCODE_DO_BIND_ADD_ADDR_ULEB to not be followed by another
// bind operation.
- error = O->BindEntryCheckSegAndOffset(SegmentIndex, SegmentOffset +
- AdvanceAmount, false);
+ error = O->BindEntryCheckSegAndOffsets(SegmentIndex, SegmentOffset +
+ AdvanceAmount, PointerSize);
if (error) {
*E = malformedError("for BIND_OPCODE_ADD_ADDR_ULEB (after adding "
"ULEB) " +
@@ -3782,7 +3749,8 @@ void MachOBindEntry::moveNext() {
moveToEnd();
return;
}
- error = O->BindEntryCheckSegAndOffset(SegmentIndex, SegmentOffset, true);
+ error = O->BindEntryCheckSegAndOffsets(SegmentIndex, SegmentOffset,
+ PointerSize);
if (error) {
*E = malformedError("for BIND_OPCODE_DO_BIND_ADD_ADDR_IMM_SCALED " +
Twine(error) + " for opcode at: 0x" +
@@ -3810,8 +3778,8 @@ void MachOBindEntry::moveNext() {
}
AdvanceAmount = ImmValue * PointerSize + PointerSize;
RemainingLoopCount = 0;
- error = O->BindEntryCheckSegAndOffset(SegmentIndex, SegmentOffset +
- AdvanceAmount, false);
+ error = O->BindEntryCheckSegAndOffsets(SegmentIndex, SegmentOffset +
+ AdvanceAmount, PointerSize);
if (error) {
*E =
malformedError("for BIND_OPCODE_DO_BIND_ADD_ADDR_IMM_SCALED "
@@ -3857,15 +3825,6 @@ void MachOBindEntry::moveNext() {
moveToEnd();
return;
}
- error = O->BindEntryCheckSegAndOffset(SegmentIndex, SegmentOffset, true);
- if (error) {
- *E =
- malformedError("for BIND_OPCODE_DO_BIND_ULEB_TIMES_SKIPPING_ULEB " +
- Twine(error) + " for opcode at: 0x" +
- Twine::utohexstr(OpcodeStart - Opcodes.begin()));
- moveToEnd();
- return;
- }
if (SymbolName == StringRef()) {
*E = malformedError(
"for BIND_OPCODE_DO_BIND_ULEB_TIMES_SKIPPING_ULEB "
@@ -3884,8 +3843,8 @@ void MachOBindEntry::moveNext() {
moveToEnd();
return;
}
- error = O->BindEntryCheckCountAndSkip(Count, Skip, PointerSize,
- SegmentIndex, SegmentOffset);
+ error = O->BindEntryCheckSegAndOffsets(SegmentIndex, SegmentOffset,
+ PointerSize, Count, Skip);
if (error) {
*E =
malformedError("for BIND_OPCODE_DO_BIND_ULEB_TIMES_SKIPPING_ULEB " +
@@ -4008,53 +3967,40 @@ BindRebaseSegInfo::BindRebaseSegInfo(con
MaxSegIndex = CurSegIndex;
}
-// For use with a SegIndex,SegOffset pair in MachOBindEntry::moveNext() to
-// validate a MachOBindEntry or MachORebaseEntry.
-const char * BindRebaseSegInfo::checkSegAndOffset(int32_t SegIndex,
- uint64_t SegOffset,
- bool endInvalid) {
+// For use with a SegIndex, SegOffset, and PointerSize triple in
+// MachOBindEntry::moveNext() to validate a MachOBindEntry or MachORebaseEntry.
+//
+// Given a SegIndex, SegOffset, and PointerSize, verify a valid section exists
+// that fully contains a pointer at that location. Multiple fixups in a bind
+// (such as with the BIND_OPCODE_DO_BIND_ULEB_TIMES_SKIPPING_ULEB opcode) can
+// be tested via the Count and Skip parameters.
+const char * BindRebaseSegInfo::checkSegAndOffsets(int32_t SegIndex,
+ uint64_t SegOffset,
+ uint8_t PointerSize,
+ uint32_t Count,
+ uint32_t Skip) {
if (SegIndex == -1)
return "missing preceding *_OPCODE_SET_SEGMENT_AND_OFFSET_ULEB";
if (SegIndex >= MaxSegIndex)
return "bad segIndex (too large)";
- for (const SectionInfo &SI : Sections) {
- if (SI.SegmentIndex != SegIndex)
- continue;
- if (SI.OffsetInSegment > SegOffset)
- continue;
- if (SegOffset > (SI.OffsetInSegment + SI.Size))
- continue;
- if (endInvalid && SegOffset >= (SI.OffsetInSegment + SI.Size))
- continue;
- return nullptr;
- }
- return "bad segOffset, too large";
-}
-
-// For use in MachOBindEntry::moveNext() to validate a MachOBindEntry for
-// the BIND_OPCODE_DO_BIND_ULEB_TIMES_SKIPPING_ULEB opcode and for use in
-// MachORebaseEntry::moveNext() to validate a MachORebaseEntry for
-// REBASE_OPCODE_DO_*_TIMES* opcodes. The SegIndex and SegOffset must have
-// been already checked.
-const char * BindRebaseSegInfo::checkCountAndSkip(uint32_t Count, uint32_t Skip,
- uint8_t PointerSize,
- int32_t SegIndex,
- uint64_t SegOffset) {
- const SectionInfo &SI = findSection(SegIndex, SegOffset);
- uint64_t addr = SI.SegmentStartAddress + SegOffset;
- if (addr >= SI.Address + SI.Size)
- return "bad segOffset, too large";
- uint64_t i = 0;
- if (Count > 1)
- i = (Skip + PointerSize) * (Count - 1);
- else if (Count == 1)
- i = Skip + PointerSize;
- if (addr + i >= SI.Address + SI.Size) {
- // For rebase opcodes they can step from one section to another.
- uint64_t TrailingSegOffset = (addr + i) - SI.SegmentStartAddress;
- const char *error = checkSegAndOffset(SegIndex, TrailingSegOffset, false);
- if (error)
- return "bad count and skip, too large";
+ for (uint32_t i = 0; i < Count; ++i) {
+ uint32_t Start = SegOffset + i * (PointerSize + Skip);
+ uint32_t End = Start + PointerSize;
+ bool Found = false;
+ for (const SectionInfo &SI : Sections) {
+ if (SI.SegmentIndex != SegIndex)
+ continue;
+ if ((SI.OffsetInSegment<=Start) && (Start<(SI.OffsetInSegment+SI.Size))) {
+ if (End <= SI.OffsetInSegment + SI.Size) {
+ Found = true;
+ break;
+ }
+ else
+ return "bad offset, extends beyond section boundary";
+ }
+ }
+ if (!Found)
+ return "bad offset, not in section";
}
return nullptr;
}
Modified: llvm/trunk/test/tools/llvm-objdump/Inputs/macho-rebase-add-addr-uleb-too-big
URL: http://llvm.org/viewvc/llvm-project/llvm/trunk/test/tools/llvm-objdump/Inputs/macho-rebase-add-addr-uleb-too-big?rev=356629&r1=356628&r2=356629&view=diff
==============================================================================
Binary files - no diff available.
Modified: llvm/trunk/test/tools/llvm-objdump/macho-bad-bind.test
URL: http://llvm.org/viewvc/llvm-project/llvm/trunk/test/tools/llvm-objdump/macho-bad-bind.test?rev=356629&r1=356628&r2=356629&view=diff
==============================================================================
--- llvm/trunk/test/tools/llvm-objdump/macho-bad-bind.test (original)
+++ llvm/trunk/test/tools/llvm-objdump/macho-bad-bind.test Wed Mar 20 16:21:16 2019
@@ -1,101 +1,101 @@
-RUN: not llvm-objdump -macho -bind %p/Inputs/macho-bind-dylib-ordinal-uleb 2>&1 | FileCheck -check-prefix DYLIB-ORDINAL-ULEB %s
+RUN: not llvm-objdump -macho -bind %p/Inputs/macho-bind-dylib-ordinal-uleb 2>&1 | FileCheck -check-prefix DYLIB-ORDINAL-ULEB %s
DYLIB-ORDINAL-ULEB: macho-bind-dylib-ordinal-uleb': truncated or malformed object (for BIND_OPCODE_SET_DYLIB_ORDINAL_ULEB bad library ordinal: 355 (max 1) for opcode at: 0x0)
-RUN: not llvm-objdump -macho -bind %p/Inputs/macho-bind-dylib-ordinal-uleb-malformed-uleb128 2>&1 | FileCheck -check-prefix DYLIB-ORDINAL-ULEB-MALFORMED-ULEB128 %s
+RUN: not llvm-objdump -macho -bind %p/Inputs/macho-bind-dylib-ordinal-uleb-malformed-uleb128 2>&1 | FileCheck -check-prefix DYLIB-ORDINAL-ULEB-MALFORMED-ULEB128 %s
DYLIB-ORDINAL-ULEB-MALFORMED-ULEB128: macho-bind-dylib-ordinal-uleb-malformed-uleb128': truncated or malformed object (for BIND_OPCODE_SET_DYLIB_ORDINAL_ULEB malformed uleb128, extends past end for opcode at: 0x0)
-RUN: not llvm-objdump -macho -bind %p/Inputs/macho-bind-dylib-ordinal-uleb-too-big 2>&1 | FileCheck -check-prefix DYLIB-ORDINAL-ULEB-TOO-BIG %s
+RUN: not llvm-objdump -macho -bind %p/Inputs/macho-bind-dylib-ordinal-uleb-too-big 2>&1 | FileCheck -check-prefix DYLIB-ORDINAL-ULEB-TOO-BIG %s
DYLIB-ORDINAL-ULEB-TOO-BIG: macho-bind-dylib-ordinal-uleb-too-big': truncated or malformed object (for BIND_OPCODE_SET_DYLIB_ORDINAL_ULEB uleb128 too big for uint64 for opcode at: 0x0)
-RUN: not llvm-objdump -macho -bind %p/Inputs/macho-bind-dylib-special-imm 2>&1 | FileCheck -check-prefix DYLIB-SPECIAL-IMM %s
+RUN: not llvm-objdump -macho -bind %p/Inputs/macho-bind-dylib-special-imm 2>&1 | FileCheck -check-prefix DYLIB-SPECIAL-IMM %s
DYLIB-SPECIAL-IMM: macho-bind-dylib-special-imm': truncated or malformed object (for BIND_OPCODE_SET_DYLIB_SPECIAL_IMM unknown special ordinal: -5 for opcode at: 0x0)
-RUN: not llvm-objdump -macho -bind %p/Inputs/macho-bind-set-symbol 2>&1 | FileCheck -check-prefix BIND-SET-SYMBOL %s
+RUN: not llvm-objdump -macho -bind %p/Inputs/macho-bind-set-symbol 2>&1 | FileCheck -check-prefix BIND-SET-SYMBOL %s
BIND-SET-SYMBOL: macho-bind-set-symbol': truncated or malformed object (for BIND_OPCODE_SET_SYMBOL_TRAILING_FLAGS_IMM symbol name extends past opcodes for opcode at: 0x2)
-RUN: not llvm-objdump -macho -bind %p/Inputs/macho-bind-set-type-imm 2>&1 | FileCheck -check-prefix SET-TYPE-IMM %s
+RUN: not llvm-objdump -macho -bind %p/Inputs/macho-bind-set-type-imm 2>&1 | FileCheck -check-prefix SET-TYPE-IMM %s
SET-TYPE-IMM: macho-bind-set-type-imm': truncated or malformed object (for BIND_OPCODE_SET_TYPE_IMM bad bind type: 5 for opcode at: 0x14)
-RUN: not llvm-objdump -macho -bind %p/Inputs/macho-bind-set-addend-sleb 2>&1 | FileCheck -check-prefix SET-ADDEND-SLEB %s
+RUN: not llvm-objdump -macho -bind %p/Inputs/macho-bind-set-addend-sleb 2>&1 | FileCheck -check-prefix SET-ADDEND-SLEB %s
SET-ADDEND-SLEB: macho-bind-set-addend-sleb': truncated or malformed object (for BIND_OPCODE_SET_ADDEND_SLEB malformed sleb128, extends past end for opcode at: 0x14)
-RUN: not llvm-objdump -macho -bind %p/Inputs/macho-bind-seg-too-big 2>&1 | FileCheck -check-prefix SEG-TOO-BIG %s
+RUN: not llvm-objdump -macho -bind %p/Inputs/macho-bind-seg-too-big 2>&1 | FileCheck -check-prefix SEG-TOO-BIG %s
SEG-TOO-BIG: macho-bind-seg-too-big': truncated or malformed object (for BIND_OPCODE_SET_SEGMENT_AND_OFFSET_ULEB bad segIndex (too large) for opcode at: 0x15)
-RUN: not llvm-objdump -macho -bind %p/Inputs/macho-bind-segoff-too-big 2>&1 | FileCheck -check-prefix SEGOFF-TOO-BIG %s
-SEGOFF-TOO-BIG: macho-bind-segoff-too-big': truncated or malformed object (for BIND_OPCODE_SET_SEGMENT_AND_OFFSET_ULEB bad segOffset, too large for opcode at: 0x15)
+RUN: not llvm-objdump -macho -bind %p/Inputs/macho-bind-segoff-too-big 2>&1 | FileCheck -check-prefix SEGOFF-TOO-BIG %s
+SEGOFF-TOO-BIG: macho-bind-segoff-too-big': truncated or malformed object (for BIND_OPCODE_SET_SEGMENT_AND_OFFSET_ULEB bad offset, not in section for opcode at: 0x15)
-RUN: not llvm-objdump -macho -bind %p/Inputs/macho-bind-add_addr_uleb 2>&1 | FileCheck -check-prefix ADD_ADDR_ULEB %s
-ADD_ADDR_ULEB: macho-bind-add_addr_uleb': truncated or malformed object (for BIND_OPCODE_ADD_ADDR_ULEB bad segOffset, too large for opcode at: 0x17)
+RUN: not llvm-objdump -macho -bind %p/Inputs/macho-bind-add_addr_uleb 2>&1 | FileCheck -check-prefix ADD_ADDR_ULEB %s
+ADD_ADDR_ULEB: macho-bind-add_addr_uleb': truncated or malformed object (for BIND_OPCODE_ADD_ADDR_ULEB bad offset, not in section for opcode at: 0x17)
-RUN: not llvm-objdump -macho -bind %p/Inputs/macho-bind-do-bind-no-segIndex 2>&1 | FileCheck -check-prefix BIND-NO-SEGINDEX %s
+RUN: not llvm-objdump -macho -bind %p/Inputs/macho-bind-do-bind-no-segIndex 2>&1 | FileCheck -check-prefix BIND-NO-SEGINDEX %s
BIND-NO-SEGINDEX: macho-bind-do-bind-no-segIndex': truncated or malformed object (for BIND_OPCODE_DO_BIND missing preceding *_OPCODE_SET_SEGMENT_AND_OFFSET_ULEB for opcode at: 0x15)
-RUN: not llvm-objdump -macho -bind %p/Inputs/macho-bind-bind-add-addr-uleb 2>&1 | FileCheck -check-prefix ADD-ADDR-ULEB %s
-ADD-ADDR-ULEB: macho-bind-bind-add-addr-uleb': truncated or malformed object (for BIND_OPCODE_ADD_ADDR_ULEB (after adding ULEB) bad segOffset, too large for opcode at: 0x18)
+RUN: not llvm-objdump -macho -bind %p/Inputs/macho-bind-bind-add-addr-uleb 2>&1 | FileCheck -check-prefix ADD-ADDR-ULEB %s
+ADD-ADDR-ULEB: macho-bind-bind-add-addr-uleb': truncated or malformed object (for BIND_OPCODE_ADD_ADDR_ULEB (after adding ULEB) bad offset, not in section for opcode at: 0x18)
-RUN: not llvm-objdump -macho -bind %p/Inputs/macho-bind-add-addr-imm-scaled 2>&1 | FileCheck -check-prefix ADD-ADDR-IMM-SCALED %s
-ADD-ADDR-IMM-SCALED: macho-bind-add-addr-imm-scaled': truncated or malformed object (for BIND_OPCODE_DO_BIND_ADD_ADDR_IMM_SCALED (after adding immediate times the pointer size) bad segOffset, too large for opcode at: 0x17)
+RUN: not llvm-objdump -macho -bind %p/Inputs/macho-bind-add-addr-imm-scaled 2>&1 | FileCheck -check-prefix ADD-ADDR-IMM-SCALED %s
+ADD-ADDR-IMM-SCALED: macho-bind-add-addr-imm-scaled': truncated or malformed object (for BIND_OPCODE_DO_BIND_ADD_ADDR_IMM_SCALED (after adding immediate times the pointer size) bad offset, not in section for opcode at: 0x17)
-RUN: not llvm-objdump -macho -bind %p/Inputs/macho-bind-uleb-times-skipping-uleb 2>&1 | FileCheck -check-prefix ULEB-TIMES-SKIPPING-ULEB %s
-ULEB-TIMES-SKIPPING-ULEB: macho-bind-uleb-times-skipping-uleb': truncated or malformed object (for BIND_OPCODE_DO_BIND_ULEB_TIMES_SKIPPING_ULEB bad count and skip, too large for opcode at: 0x17)
+RUN: not llvm-objdump -macho -bind %p/Inputs/macho-bind-uleb-times-skipping-uleb 2>&1 | FileCheck -check-prefix ULEB-TIMES-SKIPPING-ULEB %s
+ULEB-TIMES-SKIPPING-ULEB: macho-bind-uleb-times-skipping-uleb': truncated or malformed object (for BIND_OPCODE_DO_BIND_ULEB_TIMES_SKIPPING_ULEB bad offset, not in section for opcode at: 0x17)
-RUN: not llvm-objdump -macho -bind %p/Inputs/macho-do-bind-no-symbol 2>&1 | FileCheck -check-prefix DO-BIND-NO-SYMBOL %s
+RUN: not llvm-objdump -macho -bind %p/Inputs/macho-do-bind-no-symbol 2>&1 | FileCheck -check-prefix DO-BIND-NO-SYMBOL %s
DO-BIND-NO-SYMBOL: macho-do-bind-no-symbol': truncated or malformed object (for BIND_OPCODE_DO_BIND_ADD_ADDR_ULEB missing preceding BIND_OPCODE_SET_SYMBOL_TRAILING_FLAGS_IMM for opcode at: 0x5)
-RUN: not llvm-objdump -macho -bind %p/Inputs/macho-do-bind-no-dylib-ordinal 2>&1 | FileCheck -check-prefix DO-BIND-NO-DYLIB-ORDINAL %s
+RUN: not llvm-objdump -macho -bind %p/Inputs/macho-do-bind-no-dylib-ordinal 2>&1 | FileCheck -check-prefix DO-BIND-NO-DYLIB-ORDINAL %s
DO-BIND-NO-DYLIB-ORDINAL: macho-do-bind-no-dylib-ordinal': truncated or malformed object (for BIND_OPCODE_DO_BIND_ADD_ADDR_ULEB missing preceding BIND_OPCODE_SET_DYLIB_ORDINAL_* for opcode at: 0x15)
-RUN: not llvm-objdump -macho -bind %p/Inputs/macho-bind-bad-opcode-value 2>&1 | FileCheck -check-prefix BAD-OPCODE-VALUE %s
+RUN: not llvm-objdump -macho -bind %p/Inputs/macho-bind-bad-opcode-value 2>&1 | FileCheck -check-prefix BAD-OPCODE-VALUE %s
BAD-OPCODE-VALUE: macho-bind-bad-opcode-value': truncated or malformed object (bad bind info (bad opcode value 0xd0 for opcode at: 0x18)
-RUN: not llvm-objdump -macho -lazy-bind %p/Inputs/macho-lazy-do_bind_add_addr_uleb 2>&1 | FileCheck -check-prefix LAZY_DO_BIND_ADD_ADDR_ULEB %s
+RUN: not llvm-objdump -macho -lazy-bind %p/Inputs/macho-lazy-do_bind_add_addr_uleb 2>&1 | FileCheck -check-prefix LAZY_DO_BIND_ADD_ADDR_ULEB %s
LAZY_DO_BIND_ADD_ADDR_ULEB: macho-lazy-do_bind_add_addr_uleb': truncated or malformed object (BIND_OPCODE_DO_BIND_ADD_ADDR_ULEB not allowed in lazy bind table for opcode at: 0xc)
-RUN: not llvm-objdump -macho -lazy-bind %p/Inputs/macho-lazy-do-bind-add-addr-imm-scaled 2>&1 | FileCheck -check-prefix LAZY-DO-BIND-ADD-ADDR-IMM-SCALED %s
+RUN: not llvm-objdump -macho -lazy-bind %p/Inputs/macho-lazy-do-bind-add-addr-imm-scaled 2>&1 | FileCheck -check-prefix LAZY-DO-BIND-ADD-ADDR-IMM-SCALED %s
LAZY-DO-BIND-ADD-ADDR-IMM-SCALED: macho-lazy-do-bind-add-addr-imm-scaled': truncated or malformed object (BIND_OPCODE_DO_BIND_ADD_ADDR_IMM_SCALED not allowed in lazy bind table for opcode at: 0xc)
-RUN: not llvm-objdump -macho -lazy-bind %p/Inputs/macho-lazy-do-bind-uleb-times-skipping-uleb 2>&1 | FileCheck -check-prefix LAZY-DO-BIND-ULEB-TIMES-SKIPPING-ULEB %s
+RUN: not llvm-objdump -macho -lazy-bind %p/Inputs/macho-lazy-do-bind-uleb-times-skipping-uleb 2>&1 | FileCheck -check-prefix LAZY-DO-BIND-ULEB-TIMES-SKIPPING-ULEB %s
LAZY-DO-BIND-ULEB-TIMES-SKIPPING-ULEB: macho-lazy-do-bind-uleb-times-skipping-uleb': truncated or malformed object (BIND_OPCODE_DO_BIND_ULEB_TIMES_SKIPPING_ULEB not allowed in lazy bind table for opcode at: 0xc)
-RUN: not llvm-objdump -macho -weak-bind %p/Inputs/macho-weak-bind-set-dylib-ordinal-imm 2>&1 | FileCheck -check-prefix WEAK-BIND-SET-DYLIB-ORDINAL-IMM %s
+RUN: not llvm-objdump -macho -weak-bind %p/Inputs/macho-weak-bind-set-dylib-ordinal-imm 2>&1 | FileCheck -check-prefix WEAK-BIND-SET-DYLIB-ORDINAL-IMM %s
WEAK-BIND-SET-DYLIB-ORDINAL-IMM: macho-weak-bind-set-dylib-ordinal-imm': truncated or malformed object (BIND_OPCODE_SET_DYLIB_ORDINAL_IMM not allowed in weak bind table for opcode at: 0x2)
-RUN: not llvm-objdump -macho -weak-bind %p/Inputs/macho-weak-bind-set-dylib-ordinal-uleb 2>&1 | FileCheck -check-prefix WEAK-BIND-SET-DYLIB-ORDINAL-ULEB %s
+RUN: not llvm-objdump -macho -weak-bind %p/Inputs/macho-weak-bind-set-dylib-ordinal-uleb 2>&1 | FileCheck -check-prefix WEAK-BIND-SET-DYLIB-ORDINAL-ULEB %s
WEAK-BIND-SET-DYLIB-ORDINAL-ULEB: macho-weak-bind-set-dylib-ordinal-uleb': truncated or malformed object (BIND_OPCODE_SET_DYLIB_ORDINAL_ULEB not allowed in weak bind table for opcode at: 0x2)
-RUN: not llvm-objdump -macho -weak-bind %p/Inputs/macho-weak-bind-set-dylib-special-imm 2>&1 | FileCheck -check-prefix WEAK-BIND-SET-DYLIB-SPECIAL-IMM %s
+RUN: not llvm-objdump -macho -weak-bind %p/Inputs/macho-weak-bind-set-dylib-special-imm 2>&1 | FileCheck -check-prefix WEAK-BIND-SET-DYLIB-SPECIAL-IMM %s
WEAK-BIND-SET-DYLIB-SPECIAL-IMM: macho-weak-bind-set-dylib-special-imm': truncated or malformed object (BIND_OPCODE_SET_DYLIB_SPECIAL_IMM not allowed in weak bind table for opcode at: 0x2)
-RUN: not llvm-objdump -macho -rebase %p/Inputs/macho-rebase-set-type-imm 2>&1 | FileCheck -check-prefix REBASE-SET-TYPE-IMM %s
+RUN: not llvm-objdump -macho -rebase %p/Inputs/macho-rebase-set-type-imm 2>&1 | FileCheck -check-prefix REBASE-SET-TYPE-IMM %s
REBASE-SET-TYPE-IMM: macho-rebase-set-type-imm': truncated or malformed object (for REBASE_OPCODE_SET_TYPE_IMM bad bind type: 5 for opcode at: 0x0)
-RUN: not llvm-objdump -macho -rebase %p/Inputs/macho-rebase-uleb-malformed-uleb128 2>&1 | FileCheck -check-prefix REBASE-ULEB-MALFORMED-ULEB128 %s
+RUN: not llvm-objdump -macho -rebase %p/Inputs/macho-rebase-uleb-malformed-uleb128 2>&1 | FileCheck -check-prefix REBASE-ULEB-MALFORMED-ULEB128 %s
REBASE-ULEB-MALFORMED-ULEB128: macho-rebase-uleb-malformed-uleb128': truncated or malformed object (for REBASE_OPCODE_SET_SEGMENT_AND_OFFSET_ULEB malformed uleb128, extends past end for opcode at: 0x1)
-RUN: not llvm-objdump -macho -rebase %p/Inputs/macho-rebase-seg-too-big 2>&1 | FileCheck -check-prefix REBASE-SEG-TOO-BIG %s
+RUN: not llvm-objdump -macho -rebase %p/Inputs/macho-rebase-seg-too-big 2>&1 | FileCheck -check-prefix REBASE-SEG-TOO-BIG %s
REBASE-SEG-TOO-BIG: macho-rebase-seg-too-big': truncated or malformed object (for REBASE_OPCODE_SET_SEGMENT_AND_OFFSET_ULEB bad segIndex (too large) for opcode at: 0x1)
-RUN: not llvm-objdump -macho -rebase %p/Inputs/macho-rebase-segoff-too-big 2>&1 | FileCheck -check-prefix REBASE-SEGOFF-TOO-BIG %s
-REBASE-SEGOFF-TOO-BIG: macho-rebase-segoff-too-big': truncated or malformed object (for REBASE_OPCODE_SET_SEGMENT_AND_OFFSET_ULEB bad segOffset, too large for opcode at: 0x1)
+RUN: not llvm-objdump -macho -rebase %p/Inputs/macho-rebase-segoff-too-big 2>&1 | FileCheck -check-prefix REBASE-SEGOFF-TOO-BIG %s
+REBASE-SEGOFF-TOO-BIG: macho-rebase-segoff-too-big': truncated or malformed object (for REBASE_OPCODE_SET_SEGMENT_AND_OFFSET_ULEB bad offset, not in section for opcode at: 0x1)
-RUN: not llvm-objdump -macho -rebase %p/Inputs/macho-rebase-add-addr-uleb 2>&1 | FileCheck -check-prefix REBASE-ADD-ADDR-ULEB %s
-REBASE-ADD-ADDR-ULEB: macho-rebase-add-addr-uleb': truncated or malformed object (for REBASE_OPCODE_ADD_ADDR_ULEB bad segOffset, too large for opcode at: 0x3)
+RUN: not llvm-objdump -macho -rebase %p/Inputs/macho-rebase-add-addr-uleb 2>&1 | FileCheck -check-prefix REBASE-ADD-ADDR-ULEB %s
+REBASE-ADD-ADDR-ULEB: macho-rebase-add-addr-uleb': truncated or malformed object (for REBASE_OPCODE_ADD_ADDR_ULEB bad offset, not in section for opcode at: 0x3)
-RUN: not llvm-objdump -macho -rebase %p/Inputs/macho-rebase-add-addr-imm-scaled 2>&1 | FileCheck -check-prefix REBASE-ADD-ADDR-IMM-SCALED %s
-REBASE-ADD-ADDR-IMM-SCALED: macho-rebase-add-addr-imm-scaled': truncated or malformed object (for REBASE_OPCODE_ADD_ADDR_IMM_SCALED (after adding immediate times the pointer size) bad segOffset, too large for opcode at: 0x3)
+RUN: not llvm-objdump -macho -rebase %p/Inputs/macho-rebase-add-addr-imm-scaled 2>&1 | FileCheck -check-prefix REBASE-ADD-ADDR-IMM-SCALED %s
+REBASE-ADD-ADDR-IMM-SCALED: macho-rebase-add-addr-imm-scaled': truncated or malformed object (for REBASE_OPCODE_ADD_ADDR_IMM_SCALED (after adding immediate times the pointer size) bad offset, not in section for opcode at: 0x3)
-RUN: not llvm-objdump -macho -rebase %p/Inputs/macho-rebase-imm-times 2>&1 | FileCheck -check-prefix REBASE-IMM-TIMES %s
-REBASE-IMM-TIMES: macho-rebase-imm-times': truncated or malformed object (for REBASE_OPCODE_DO_REBASE_IMM_TIMES bad count and skip, too large for opcode at: 0x3)
+RUN: not llvm-objdump -macho -rebase %p/Inputs/macho-rebase-imm-times 2>&1 | FileCheck -check-prefix REBASE-IMM-TIMES %s
+REBASE-IMM-TIMES: macho-rebase-imm-times': truncated or malformed object (for REBASE_OPCODE_DO_REBASE_IMM_TIMES bad offset, not in section for opcode at: 0x3)
-RUN: not llvm-objdump -macho -rebase %p/Inputs/macho-rebase-uleb-times 2>&1 | FileCheck -check-prefix REBASE-ULEB-TIMES %s
-REBASE-ULEB-TIMES: macho-rebase-uleb-times': truncated or malformed object (for REBASE_OPCODE_DO_REBASE_ULEB_TIMES bad count and skip, too large for opcode at: 0x3)
+RUN: not llvm-objdump -macho -rebase %p/Inputs/macho-rebase-uleb-times 2>&1 | FileCheck -check-prefix REBASE-ULEB-TIMES %s
+REBASE-ULEB-TIMES: macho-rebase-uleb-times': truncated or malformed object (for REBASE_OPCODE_DO_REBASE_ULEB_TIMES bad offset, not in section for opcode at: 0x3)
-RUN: not llvm-objdump -macho -rebase %p/Inputs/macho-rebase-add-addr-uleb-too-big 2>&1 | FileCheck -check-prefix REBASE-ADD-ADDR-ULEB-TOO-BIG %s
-REBASE-ADD-ADDR-ULEB-TOO-BIG: macho-rebase-add-addr-uleb-too-big': truncated or malformed object (for REBASE_OPCODE_DO_REBASE_ADD_ADDR_ULEB bad count and skip, too large for opcode at: 0x3)
+RUN: not llvm-objdump -macho -rebase %p/Inputs/macho-rebase-add-addr-uleb-too-big 2>&1 | FileCheck -check-prefix REBASE-ADD-ADDR-ULEB-TOO-BIG %s
+REBASE-ADD-ADDR-ULEB-TOO-BIG: macho-rebase-add-addr-uleb-too-big': truncated or malformed object (for REBASE_OPCODE_DO_REBASE_IMM_TIMES bad offset, not in section for opcode at: 0x6)
-RUN: not llvm-objdump -macho -rebase %p/Inputs/macho-rebase-uleb-times-skipping-uleb 2>&1 | FileCheck -check-prefix REBASE-ULEB-TIMES-SKIPPING-ULEB %s
-REBASE-ULEB-TIMES-SKIPPING-ULEB: macho-rebase-uleb-times-skipping-uleb': truncated or malformed object (for REBASE_OPCODE_DO_REBASE_ULEB_TIMES_SKIPPING_ULEB bad count and skip, too large for opcode at: 0x3)
+RUN: not llvm-objdump -macho -rebase %p/Inputs/macho-rebase-uleb-times-skipping-uleb 2>&1 | FileCheck -check-prefix REBASE-ULEB-TIMES-SKIPPING-ULEB %s
+REBASE-ULEB-TIMES-SKIPPING-ULEB: macho-rebase-uleb-times-skipping-uleb': truncated or malformed object (for REBASE_OPCODE_DO_REBASE_ULEB_TIMES_SKIPPING_ULEB bad offset, not in section for opcode at: 0x3)
-RUN: not llvm-objdump -macho -rebase %p/Inputs/macho-rebase-bad-opcode-value 2>&1 | FileCheck -check-prefix REBASE-BAD-OPCODE-VALUE %s
+RUN: not llvm-objdump -macho -rebase %p/Inputs/macho-rebase-bad-opcode-value 2>&1 | FileCheck -check-prefix REBASE-BAD-OPCODE-VALUE %s
REBASE-BAD-OPCODE-VALUE: macho-rebase-bad-opcode-value': truncated or malformed object (bad rebase info (bad opcode value 0xd0 for opcode at: 0x4)
More information about the llvm-commits
mailing list