[llvm] r336122 - [CostModel][X86] Add cost tests for fp rounding intrinsics
Simon Pilgrim via llvm-commits
llvm-commits at lists.llvm.org
Mon Jul 2 10:07:01 PDT 2018
Author: rksimon
Date: Mon Jul 2 10:07:01 2018
New Revision: 336122
URL: http://llvm.org/viewvc/llvm-project?rev=336122&view=rev
Log:
[CostModel][X86] Add cost tests for fp rounding intrinsics
Add cost tests for fp ceil, floor, nearbyint, rint and trunc.
Added:
llvm/trunk/test/Analysis/CostModel/X86/fround.ll
Added: llvm/trunk/test/Analysis/CostModel/X86/fround.ll
URL: http://llvm.org/viewvc/llvm-project/llvm/trunk/test/Analysis/CostModel/X86/fround.ll?rev=336122&view=auto
==============================================================================
--- llvm/trunk/test/Analysis/CostModel/X86/fround.ll (added)
+++ llvm/trunk/test/Analysis/CostModel/X86/fround.ll Mon Jul 2 10:07:01 2018
@@ -0,0 +1,519 @@
+; NOTE: Assertions have been autogenerated by utils/update_analyze_test_checks.py
+; RUN: opt < %s -enable-no-nans-fp-math -cost-model -analyze -mtriple=x86_64-apple-macosx10.8.0 -mattr=+sse2 | FileCheck %s --check-prefixes=CHECK,SSE,SSE2
+; RUN: opt < %s -enable-no-nans-fp-math -cost-model -analyze -mtriple=x86_64-apple-macosx10.8.0 -mattr=+sse4.2 | FileCheck %s --check-prefixes=CHECK,SSE,SSE42
+; RUN: opt < %s -enable-no-nans-fp-math -cost-model -analyze -mtriple=x86_64-apple-macosx10.8.0 -mattr=+avx | FileCheck %s --check-prefixes=CHECK,AVX,AVX1
+; RUN: opt < %s -enable-no-nans-fp-math -cost-model -analyze -mtriple=x86_64-apple-macosx10.8.0 -mattr=+avx2 | FileCheck %s --check-prefixes=CHECK,AVX,AVX2
+; RUN: opt < %s -enable-no-nans-fp-math -cost-model -analyze -mtriple=x86_64-apple-macosx10.8.0 -mattr=+avx512f | FileCheck %s --check-prefixes=CHECK,AVX512,AVX512F
+; RUN: opt < %s -enable-no-nans-fp-math -cost-model -analyze -mtriple=x86_64-apple-macosx10.8.0 -mattr=+avx512f,+avx512bw | FileCheck %s --check-prefixes=CHECK,AVX512,AVX512BW
+;
+; RUN: opt < %s -enable-no-nans-fp-math -cost-model -analyze -mtriple=x86_64-apple-macosx10.8.0 -mcpu=slm | FileCheck %s --check-prefixes=SLM
+; RUN: opt < %s -enable-no-nans-fp-math -cost-model -analyze -mtriple=x86_64-apple-macosx10.8.0 -mcpu=goldmont | FileCheck %s --check-prefixes=GLM
+; RUN: opt < %s -enable-no-nans-fp-math -cost-model -analyze -mtriple=x86_64-apple-macosx10.8.0 -mcpu=btver2 | FileCheck %s --check-prefixes=BTVER2
+
+target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
+target triple = "x86_64-apple-macosx10.8.0"
+
+define i32 @ceil(i32 %arg) {
+; SSE2-LABEL: 'ceil'
+; SSE2-NEXT: Cost Model: Found an estimated cost of 10 for instruction: %F32 = call float @llvm.ceil.f32(float undef)
+; SSE2-NEXT: Cost Model: Found an estimated cost of 43 for instruction: %V4F32 = call <4 x float> @llvm.ceil.v4f32(<4 x float> undef)
+; SSE2-NEXT: Cost Model: Found an estimated cost of 86 for instruction: %V8F32 = call <8 x float> @llvm.ceil.v8f32(<8 x float> undef)
+; SSE2-NEXT: Cost Model: Found an estimated cost of 172 for instruction: %V16F32 = call <16 x float> @llvm.ceil.v16f32(<16 x float> undef)
+; SSE2-NEXT: Cost Model: Found an estimated cost of 10 for instruction: %F64 = call double @llvm.ceil.f64(double undef)
+; SSE2-NEXT: Cost Model: Found an estimated cost of 21 for instruction: %V2F64 = call <2 x double> @llvm.ceil.v2f64(<2 x double> undef)
+; SSE2-NEXT: Cost Model: Found an estimated cost of 42 for instruction: %V4F64 = call <4 x double> @llvm.ceil.v4f64(<4 x double> undef)
+; SSE2-NEXT: Cost Model: Found an estimated cost of 84 for instruction: %V8F64 = call <8 x double> @llvm.ceil.v8f64(<8 x double> undef)
+; SSE2-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret i32 undef
+;
+; SSE42-LABEL: 'ceil'
+; SSE42-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F32 = call float @llvm.ceil.f32(float undef)
+; SSE42-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F32 = call <4 x float> @llvm.ceil.v4f32(<4 x float> undef)
+; SSE42-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V8F32 = call <8 x float> @llvm.ceil.v8f32(<8 x float> undef)
+; SSE42-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %V16F32 = call <16 x float> @llvm.ceil.v16f32(<16 x float> undef)
+; SSE42-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F64 = call double @llvm.ceil.f64(double undef)
+; SSE42-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V2F64 = call <2 x double> @llvm.ceil.v2f64(<2 x double> undef)
+; SSE42-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V4F64 = call <4 x double> @llvm.ceil.v4f64(<4 x double> undef)
+; SSE42-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %V8F64 = call <8 x double> @llvm.ceil.v8f64(<8 x double> undef)
+; SSE42-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret i32 undef
+;
+; AVX-LABEL: 'ceil'
+; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F32 = call float @llvm.ceil.f32(float undef)
+; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F32 = call <4 x float> @llvm.ceil.v4f32(<4 x float> undef)
+; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8F32 = call <8 x float> @llvm.ceil.v8f32(<8 x float> undef)
+; AVX-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V16F32 = call <16 x float> @llvm.ceil.v16f32(<16 x float> undef)
+; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F64 = call double @llvm.ceil.f64(double undef)
+; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V2F64 = call <2 x double> @llvm.ceil.v2f64(<2 x double> undef)
+; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F64 = call <4 x double> @llvm.ceil.v4f64(<4 x double> undef)
+; AVX-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V8F64 = call <8 x double> @llvm.ceil.v8f64(<8 x double> undef)
+; AVX-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret i32 undef
+;
+; AVX512-LABEL: 'ceil'
+; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F32 = call float @llvm.ceil.f32(float undef)
+; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F32 = call <4 x float> @llvm.ceil.v4f32(<4 x float> undef)
+; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8F32 = call <8 x float> @llvm.ceil.v8f32(<8 x float> undef)
+; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V16F32 = call <16 x float> @llvm.ceil.v16f32(<16 x float> undef)
+; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F64 = call double @llvm.ceil.f64(double undef)
+; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V2F64 = call <2 x double> @llvm.ceil.v2f64(<2 x double> undef)
+; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F64 = call <4 x double> @llvm.ceil.v4f64(<4 x double> undef)
+; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8F64 = call <8 x double> @llvm.ceil.v8f64(<8 x double> undef)
+; AVX512-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret i32 undef
+;
+; SLM-LABEL: 'ceil'
+; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F32 = call float @llvm.ceil.f32(float undef)
+; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F32 = call <4 x float> @llvm.ceil.v4f32(<4 x float> undef)
+; SLM-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V8F32 = call <8 x float> @llvm.ceil.v8f32(<8 x float> undef)
+; SLM-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %V16F32 = call <16 x float> @llvm.ceil.v16f32(<16 x float> undef)
+; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F64 = call double @llvm.ceil.f64(double undef)
+; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V2F64 = call <2 x double> @llvm.ceil.v2f64(<2 x double> undef)
+; SLM-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V4F64 = call <4 x double> @llvm.ceil.v4f64(<4 x double> undef)
+; SLM-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %V8F64 = call <8 x double> @llvm.ceil.v8f64(<8 x double> undef)
+; SLM-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret i32 undef
+;
+; GLM-LABEL: 'ceil'
+; GLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F32 = call float @llvm.ceil.f32(float undef)
+; GLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F32 = call <4 x float> @llvm.ceil.v4f32(<4 x float> undef)
+; GLM-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V8F32 = call <8 x float> @llvm.ceil.v8f32(<8 x float> undef)
+; GLM-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %V16F32 = call <16 x float> @llvm.ceil.v16f32(<16 x float> undef)
+; GLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F64 = call double @llvm.ceil.f64(double undef)
+; GLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V2F64 = call <2 x double> @llvm.ceil.v2f64(<2 x double> undef)
+; GLM-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V4F64 = call <4 x double> @llvm.ceil.v4f64(<4 x double> undef)
+; GLM-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %V8F64 = call <8 x double> @llvm.ceil.v8f64(<8 x double> undef)
+; GLM-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret i32 undef
+;
+; BTVER2-LABEL: 'ceil'
+; BTVER2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F32 = call float @llvm.ceil.f32(float undef)
+; BTVER2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F32 = call <4 x float> @llvm.ceil.v4f32(<4 x float> undef)
+; BTVER2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8F32 = call <8 x float> @llvm.ceil.v8f32(<8 x float> undef)
+; BTVER2-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V16F32 = call <16 x float> @llvm.ceil.v16f32(<16 x float> undef)
+; BTVER2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F64 = call double @llvm.ceil.f64(double undef)
+; BTVER2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V2F64 = call <2 x double> @llvm.ceil.v2f64(<2 x double> undef)
+; BTVER2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F64 = call <4 x double> @llvm.ceil.v4f64(<4 x double> undef)
+; BTVER2-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V8F64 = call <8 x double> @llvm.ceil.v8f64(<8 x double> undef)
+; BTVER2-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret i32 undef
+;
+ %F32 = call float @llvm.ceil.f32(float undef)
+ %V4F32 = call <4 x float> @llvm.ceil.v4f32(<4 x float> undef)
+ %V8F32 = call <8 x float> @llvm.ceil.v8f32(<8 x float> undef)
+ %V16F32 = call <16 x float> @llvm.ceil.v16f32(<16 x float> undef)
+
+ %F64 = call double @llvm.ceil.f64(double undef)
+ %V2F64 = call <2 x double> @llvm.ceil.v2f64(<2 x double> undef)
+ %V4F64 = call <4 x double> @llvm.ceil.v4f64(<4 x double> undef)
+ %V8F64 = call <8 x double> @llvm.ceil.v8f64(<8 x double> undef)
+
+ ret i32 undef
+}
+
+define i32 @floor(i32 %arg) {
+; SSE2-LABEL: 'floor'
+; SSE2-NEXT: Cost Model: Found an estimated cost of 10 for instruction: %F32 = call float @llvm.floor.f32(float undef)
+; SSE2-NEXT: Cost Model: Found an estimated cost of 43 for instruction: %V4F32 = call <4 x float> @llvm.floor.v4f32(<4 x float> undef)
+; SSE2-NEXT: Cost Model: Found an estimated cost of 86 for instruction: %V8F32 = call <8 x float> @llvm.floor.v8f32(<8 x float> undef)
+; SSE2-NEXT: Cost Model: Found an estimated cost of 172 for instruction: %V16F32 = call <16 x float> @llvm.floor.v16f32(<16 x float> undef)
+; SSE2-NEXT: Cost Model: Found an estimated cost of 10 for instruction: %F64 = call double @llvm.floor.f64(double undef)
+; SSE2-NEXT: Cost Model: Found an estimated cost of 21 for instruction: %V2F64 = call <2 x double> @llvm.floor.v2f64(<2 x double> undef)
+; SSE2-NEXT: Cost Model: Found an estimated cost of 42 for instruction: %V4F64 = call <4 x double> @llvm.floor.v4f64(<4 x double> undef)
+; SSE2-NEXT: Cost Model: Found an estimated cost of 84 for instruction: %V8F64 = call <8 x double> @llvm.floor.v8f64(<8 x double> undef)
+; SSE2-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret i32 undef
+;
+; SSE42-LABEL: 'floor'
+; SSE42-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F32 = call float @llvm.floor.f32(float undef)
+; SSE42-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F32 = call <4 x float> @llvm.floor.v4f32(<4 x float> undef)
+; SSE42-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V8F32 = call <8 x float> @llvm.floor.v8f32(<8 x float> undef)
+; SSE42-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %V16F32 = call <16 x float> @llvm.floor.v16f32(<16 x float> undef)
+; SSE42-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F64 = call double @llvm.floor.f64(double undef)
+; SSE42-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V2F64 = call <2 x double> @llvm.floor.v2f64(<2 x double> undef)
+; SSE42-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V4F64 = call <4 x double> @llvm.floor.v4f64(<4 x double> undef)
+; SSE42-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %V8F64 = call <8 x double> @llvm.floor.v8f64(<8 x double> undef)
+; SSE42-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret i32 undef
+;
+; AVX-LABEL: 'floor'
+; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F32 = call float @llvm.floor.f32(float undef)
+; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F32 = call <4 x float> @llvm.floor.v4f32(<4 x float> undef)
+; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8F32 = call <8 x float> @llvm.floor.v8f32(<8 x float> undef)
+; AVX-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V16F32 = call <16 x float> @llvm.floor.v16f32(<16 x float> undef)
+; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F64 = call double @llvm.floor.f64(double undef)
+; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V2F64 = call <2 x double> @llvm.floor.v2f64(<2 x double> undef)
+; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F64 = call <4 x double> @llvm.floor.v4f64(<4 x double> undef)
+; AVX-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V8F64 = call <8 x double> @llvm.floor.v8f64(<8 x double> undef)
+; AVX-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret i32 undef
+;
+; AVX512-LABEL: 'floor'
+; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F32 = call float @llvm.floor.f32(float undef)
+; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F32 = call <4 x float> @llvm.floor.v4f32(<4 x float> undef)
+; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8F32 = call <8 x float> @llvm.floor.v8f32(<8 x float> undef)
+; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V16F32 = call <16 x float> @llvm.floor.v16f32(<16 x float> undef)
+; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F64 = call double @llvm.floor.f64(double undef)
+; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V2F64 = call <2 x double> @llvm.floor.v2f64(<2 x double> undef)
+; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F64 = call <4 x double> @llvm.floor.v4f64(<4 x double> undef)
+; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8F64 = call <8 x double> @llvm.floor.v8f64(<8 x double> undef)
+; AVX512-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret i32 undef
+;
+; SLM-LABEL: 'floor'
+; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F32 = call float @llvm.floor.f32(float undef)
+; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F32 = call <4 x float> @llvm.floor.v4f32(<4 x float> undef)
+; SLM-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V8F32 = call <8 x float> @llvm.floor.v8f32(<8 x float> undef)
+; SLM-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %V16F32 = call <16 x float> @llvm.floor.v16f32(<16 x float> undef)
+; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F64 = call double @llvm.floor.f64(double undef)
+; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V2F64 = call <2 x double> @llvm.floor.v2f64(<2 x double> undef)
+; SLM-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V4F64 = call <4 x double> @llvm.floor.v4f64(<4 x double> undef)
+; SLM-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %V8F64 = call <8 x double> @llvm.floor.v8f64(<8 x double> undef)
+; SLM-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret i32 undef
+;
+; GLM-LABEL: 'floor'
+; GLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F32 = call float @llvm.floor.f32(float undef)
+; GLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F32 = call <4 x float> @llvm.floor.v4f32(<4 x float> undef)
+; GLM-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V8F32 = call <8 x float> @llvm.floor.v8f32(<8 x float> undef)
+; GLM-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %V16F32 = call <16 x float> @llvm.floor.v16f32(<16 x float> undef)
+; GLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F64 = call double @llvm.floor.f64(double undef)
+; GLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V2F64 = call <2 x double> @llvm.floor.v2f64(<2 x double> undef)
+; GLM-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V4F64 = call <4 x double> @llvm.floor.v4f64(<4 x double> undef)
+; GLM-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %V8F64 = call <8 x double> @llvm.floor.v8f64(<8 x double> undef)
+; GLM-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret i32 undef
+;
+; BTVER2-LABEL: 'floor'
+; BTVER2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F32 = call float @llvm.floor.f32(float undef)
+; BTVER2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F32 = call <4 x float> @llvm.floor.v4f32(<4 x float> undef)
+; BTVER2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8F32 = call <8 x float> @llvm.floor.v8f32(<8 x float> undef)
+; BTVER2-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V16F32 = call <16 x float> @llvm.floor.v16f32(<16 x float> undef)
+; BTVER2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F64 = call double @llvm.floor.f64(double undef)
+; BTVER2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V2F64 = call <2 x double> @llvm.floor.v2f64(<2 x double> undef)
+; BTVER2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F64 = call <4 x double> @llvm.floor.v4f64(<4 x double> undef)
+; BTVER2-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V8F64 = call <8 x double> @llvm.floor.v8f64(<8 x double> undef)
+; BTVER2-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret i32 undef
+;
+ %F32 = call float @llvm.floor.f32(float undef)
+ %V4F32 = call <4 x float> @llvm.floor.v4f32(<4 x float> undef)
+ %V8F32 = call <8 x float> @llvm.floor.v8f32(<8 x float> undef)
+ %V16F32 = call <16 x float> @llvm.floor.v16f32(<16 x float> undef)
+
+ %F64 = call double @llvm.floor.f64(double undef)
+ %V2F64 = call <2 x double> @llvm.floor.v2f64(<2 x double> undef)
+ %V4F64 = call <4 x double> @llvm.floor.v4f64(<4 x double> undef)
+ %V8F64 = call <8 x double> @llvm.floor.v8f64(<8 x double> undef)
+
+ ret i32 undef
+}
+
+define i32 @nearbyint(i32 %arg) {
+; SSE2-LABEL: 'nearbyint'
+; SSE2-NEXT: Cost Model: Found an estimated cost of 10 for instruction: %F32 = call float @llvm.nearbyint.f32(float undef)
+; SSE2-NEXT: Cost Model: Found an estimated cost of 43 for instruction: %V4F32 = call <4 x float> @llvm.nearbyint.v4f32(<4 x float> undef)
+; SSE2-NEXT: Cost Model: Found an estimated cost of 86 for instruction: %V8F32 = call <8 x float> @llvm.nearbyint.v8f32(<8 x float> undef)
+; SSE2-NEXT: Cost Model: Found an estimated cost of 172 for instruction: %V16F32 = call <16 x float> @llvm.nearbyint.v16f32(<16 x float> undef)
+; SSE2-NEXT: Cost Model: Found an estimated cost of 10 for instruction: %F64 = call double @llvm.nearbyint.f64(double undef)
+; SSE2-NEXT: Cost Model: Found an estimated cost of 21 for instruction: %V2F64 = call <2 x double> @llvm.nearbyint.v2f64(<2 x double> undef)
+; SSE2-NEXT: Cost Model: Found an estimated cost of 42 for instruction: %V4F64 = call <4 x double> @llvm.nearbyint.v4f64(<4 x double> undef)
+; SSE2-NEXT: Cost Model: Found an estimated cost of 84 for instruction: %V8F64 = call <8 x double> @llvm.nearbyint.v8f64(<8 x double> undef)
+; SSE2-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret i32 undef
+;
+; SSE42-LABEL: 'nearbyint'
+; SSE42-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F32 = call float @llvm.nearbyint.f32(float undef)
+; SSE42-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F32 = call <4 x float> @llvm.nearbyint.v4f32(<4 x float> undef)
+; SSE42-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V8F32 = call <8 x float> @llvm.nearbyint.v8f32(<8 x float> undef)
+; SSE42-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %V16F32 = call <16 x float> @llvm.nearbyint.v16f32(<16 x float> undef)
+; SSE42-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F64 = call double @llvm.nearbyint.f64(double undef)
+; SSE42-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V2F64 = call <2 x double> @llvm.nearbyint.v2f64(<2 x double> undef)
+; SSE42-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V4F64 = call <4 x double> @llvm.nearbyint.v4f64(<4 x double> undef)
+; SSE42-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %V8F64 = call <8 x double> @llvm.nearbyint.v8f64(<8 x double> undef)
+; SSE42-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret i32 undef
+;
+; AVX-LABEL: 'nearbyint'
+; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F32 = call float @llvm.nearbyint.f32(float undef)
+; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F32 = call <4 x float> @llvm.nearbyint.v4f32(<4 x float> undef)
+; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8F32 = call <8 x float> @llvm.nearbyint.v8f32(<8 x float> undef)
+; AVX-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V16F32 = call <16 x float> @llvm.nearbyint.v16f32(<16 x float> undef)
+; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F64 = call double @llvm.nearbyint.f64(double undef)
+; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V2F64 = call <2 x double> @llvm.nearbyint.v2f64(<2 x double> undef)
+; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F64 = call <4 x double> @llvm.nearbyint.v4f64(<4 x double> undef)
+; AVX-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V8F64 = call <8 x double> @llvm.nearbyint.v8f64(<8 x double> undef)
+; AVX-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret i32 undef
+;
+; AVX512-LABEL: 'nearbyint'
+; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F32 = call float @llvm.nearbyint.f32(float undef)
+; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F32 = call <4 x float> @llvm.nearbyint.v4f32(<4 x float> undef)
+; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8F32 = call <8 x float> @llvm.nearbyint.v8f32(<8 x float> undef)
+; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V16F32 = call <16 x float> @llvm.nearbyint.v16f32(<16 x float> undef)
+; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F64 = call double @llvm.nearbyint.f64(double undef)
+; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V2F64 = call <2 x double> @llvm.nearbyint.v2f64(<2 x double> undef)
+; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F64 = call <4 x double> @llvm.nearbyint.v4f64(<4 x double> undef)
+; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8F64 = call <8 x double> @llvm.nearbyint.v8f64(<8 x double> undef)
+; AVX512-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret i32 undef
+;
+; SLM-LABEL: 'nearbyint'
+; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F32 = call float @llvm.nearbyint.f32(float undef)
+; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F32 = call <4 x float> @llvm.nearbyint.v4f32(<4 x float> undef)
+; SLM-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V8F32 = call <8 x float> @llvm.nearbyint.v8f32(<8 x float> undef)
+; SLM-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %V16F32 = call <16 x float> @llvm.nearbyint.v16f32(<16 x float> undef)
+; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F64 = call double @llvm.nearbyint.f64(double undef)
+; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V2F64 = call <2 x double> @llvm.nearbyint.v2f64(<2 x double> undef)
+; SLM-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V4F64 = call <4 x double> @llvm.nearbyint.v4f64(<4 x double> undef)
+; SLM-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %V8F64 = call <8 x double> @llvm.nearbyint.v8f64(<8 x double> undef)
+; SLM-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret i32 undef
+;
+; GLM-LABEL: 'nearbyint'
+; GLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F32 = call float @llvm.nearbyint.f32(float undef)
+; GLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F32 = call <4 x float> @llvm.nearbyint.v4f32(<4 x float> undef)
+; GLM-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V8F32 = call <8 x float> @llvm.nearbyint.v8f32(<8 x float> undef)
+; GLM-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %V16F32 = call <16 x float> @llvm.nearbyint.v16f32(<16 x float> undef)
+; GLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F64 = call double @llvm.nearbyint.f64(double undef)
+; GLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V2F64 = call <2 x double> @llvm.nearbyint.v2f64(<2 x double> undef)
+; GLM-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V4F64 = call <4 x double> @llvm.nearbyint.v4f64(<4 x double> undef)
+; GLM-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %V8F64 = call <8 x double> @llvm.nearbyint.v8f64(<8 x double> undef)
+; GLM-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret i32 undef
+;
+; BTVER2-LABEL: 'nearbyint'
+; BTVER2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F32 = call float @llvm.nearbyint.f32(float undef)
+; BTVER2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F32 = call <4 x float> @llvm.nearbyint.v4f32(<4 x float> undef)
+; BTVER2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8F32 = call <8 x float> @llvm.nearbyint.v8f32(<8 x float> undef)
+; BTVER2-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V16F32 = call <16 x float> @llvm.nearbyint.v16f32(<16 x float> undef)
+; BTVER2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F64 = call double @llvm.nearbyint.f64(double undef)
+; BTVER2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V2F64 = call <2 x double> @llvm.nearbyint.v2f64(<2 x double> undef)
+; BTVER2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F64 = call <4 x double> @llvm.nearbyint.v4f64(<4 x double> undef)
+; BTVER2-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V8F64 = call <8 x double> @llvm.nearbyint.v8f64(<8 x double> undef)
+; BTVER2-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret i32 undef
+;
+ %F32 = call float @llvm.nearbyint.f32(float undef)
+ %V4F32 = call <4 x float> @llvm.nearbyint.v4f32(<4 x float> undef)
+ %V8F32 = call <8 x float> @llvm.nearbyint.v8f32(<8 x float> undef)
+ %V16F32 = call <16 x float> @llvm.nearbyint.v16f32(<16 x float> undef)
+
+ %F64 = call double @llvm.nearbyint.f64(double undef)
+ %V2F64 = call <2 x double> @llvm.nearbyint.v2f64(<2 x double> undef)
+ %V4F64 = call <4 x double> @llvm.nearbyint.v4f64(<4 x double> undef)
+ %V8F64 = call <8 x double> @llvm.nearbyint.v8f64(<8 x double> undef)
+
+ ret i32 undef
+}
+
+define i32 @rint(i32 %arg) {
+; SSE2-LABEL: 'rint'
+; SSE2-NEXT: Cost Model: Found an estimated cost of 10 for instruction: %F32 = call float @llvm.rint.f32(float undef)
+; SSE2-NEXT: Cost Model: Found an estimated cost of 43 for instruction: %V4F32 = call <4 x float> @llvm.rint.v4f32(<4 x float> undef)
+; SSE2-NEXT: Cost Model: Found an estimated cost of 86 for instruction: %V8F32 = call <8 x float> @llvm.rint.v8f32(<8 x float> undef)
+; SSE2-NEXT: Cost Model: Found an estimated cost of 172 for instruction: %V16F32 = call <16 x float> @llvm.rint.v16f32(<16 x float> undef)
+; SSE2-NEXT: Cost Model: Found an estimated cost of 10 for instruction: %F64 = call double @llvm.rint.f64(double undef)
+; SSE2-NEXT: Cost Model: Found an estimated cost of 21 for instruction: %V2F64 = call <2 x double> @llvm.rint.v2f64(<2 x double> undef)
+; SSE2-NEXT: Cost Model: Found an estimated cost of 42 for instruction: %V4F64 = call <4 x double> @llvm.rint.v4f64(<4 x double> undef)
+; SSE2-NEXT: Cost Model: Found an estimated cost of 84 for instruction: %V8F64 = call <8 x double> @llvm.rint.v8f64(<8 x double> undef)
+; SSE2-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret i32 undef
+;
+; SSE42-LABEL: 'rint'
+; SSE42-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F32 = call float @llvm.rint.f32(float undef)
+; SSE42-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F32 = call <4 x float> @llvm.rint.v4f32(<4 x float> undef)
+; SSE42-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V8F32 = call <8 x float> @llvm.rint.v8f32(<8 x float> undef)
+; SSE42-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %V16F32 = call <16 x float> @llvm.rint.v16f32(<16 x float> undef)
+; SSE42-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F64 = call double @llvm.rint.f64(double undef)
+; SSE42-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V2F64 = call <2 x double> @llvm.rint.v2f64(<2 x double> undef)
+; SSE42-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V4F64 = call <4 x double> @llvm.rint.v4f64(<4 x double> undef)
+; SSE42-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %V8F64 = call <8 x double> @llvm.rint.v8f64(<8 x double> undef)
+; SSE42-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret i32 undef
+;
+; AVX-LABEL: 'rint'
+; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F32 = call float @llvm.rint.f32(float undef)
+; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F32 = call <4 x float> @llvm.rint.v4f32(<4 x float> undef)
+; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8F32 = call <8 x float> @llvm.rint.v8f32(<8 x float> undef)
+; AVX-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V16F32 = call <16 x float> @llvm.rint.v16f32(<16 x float> undef)
+; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F64 = call double @llvm.rint.f64(double undef)
+; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V2F64 = call <2 x double> @llvm.rint.v2f64(<2 x double> undef)
+; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F64 = call <4 x double> @llvm.rint.v4f64(<4 x double> undef)
+; AVX-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V8F64 = call <8 x double> @llvm.rint.v8f64(<8 x double> undef)
+; AVX-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret i32 undef
+;
+; AVX512-LABEL: 'rint'
+; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F32 = call float @llvm.rint.f32(float undef)
+; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F32 = call <4 x float> @llvm.rint.v4f32(<4 x float> undef)
+; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8F32 = call <8 x float> @llvm.rint.v8f32(<8 x float> undef)
+; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V16F32 = call <16 x float> @llvm.rint.v16f32(<16 x float> undef)
+; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F64 = call double @llvm.rint.f64(double undef)
+; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V2F64 = call <2 x double> @llvm.rint.v2f64(<2 x double> undef)
+; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F64 = call <4 x double> @llvm.rint.v4f64(<4 x double> undef)
+; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8F64 = call <8 x double> @llvm.rint.v8f64(<8 x double> undef)
+; AVX512-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret i32 undef
+;
+; SLM-LABEL: 'rint'
+; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F32 = call float @llvm.rint.f32(float undef)
+; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F32 = call <4 x float> @llvm.rint.v4f32(<4 x float> undef)
+; SLM-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V8F32 = call <8 x float> @llvm.rint.v8f32(<8 x float> undef)
+; SLM-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %V16F32 = call <16 x float> @llvm.rint.v16f32(<16 x float> undef)
+; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F64 = call double @llvm.rint.f64(double undef)
+; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V2F64 = call <2 x double> @llvm.rint.v2f64(<2 x double> undef)
+; SLM-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V4F64 = call <4 x double> @llvm.rint.v4f64(<4 x double> undef)
+; SLM-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %V8F64 = call <8 x double> @llvm.rint.v8f64(<8 x double> undef)
+; SLM-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret i32 undef
+;
+; GLM-LABEL: 'rint'
+; GLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F32 = call float @llvm.rint.f32(float undef)
+; GLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F32 = call <4 x float> @llvm.rint.v4f32(<4 x float> undef)
+; GLM-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V8F32 = call <8 x float> @llvm.rint.v8f32(<8 x float> undef)
+; GLM-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %V16F32 = call <16 x float> @llvm.rint.v16f32(<16 x float> undef)
+; GLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F64 = call double @llvm.rint.f64(double undef)
+; GLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V2F64 = call <2 x double> @llvm.rint.v2f64(<2 x double> undef)
+; GLM-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V4F64 = call <4 x double> @llvm.rint.v4f64(<4 x double> undef)
+; GLM-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %V8F64 = call <8 x double> @llvm.rint.v8f64(<8 x double> undef)
+; GLM-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret i32 undef
+;
+; BTVER2-LABEL: 'rint'
+; BTVER2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F32 = call float @llvm.rint.f32(float undef)
+; BTVER2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F32 = call <4 x float> @llvm.rint.v4f32(<4 x float> undef)
+; BTVER2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8F32 = call <8 x float> @llvm.rint.v8f32(<8 x float> undef)
+; BTVER2-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V16F32 = call <16 x float> @llvm.rint.v16f32(<16 x float> undef)
+; BTVER2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F64 = call double @llvm.rint.f64(double undef)
+; BTVER2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V2F64 = call <2 x double> @llvm.rint.v2f64(<2 x double> undef)
+; BTVER2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F64 = call <4 x double> @llvm.rint.v4f64(<4 x double> undef)
+; BTVER2-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V8F64 = call <8 x double> @llvm.rint.v8f64(<8 x double> undef)
+; BTVER2-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret i32 undef
+;
+ %F32 = call float @llvm.rint.f32(float undef)
+ %V4F32 = call <4 x float> @llvm.rint.v4f32(<4 x float> undef)
+ %V8F32 = call <8 x float> @llvm.rint.v8f32(<8 x float> undef)
+ %V16F32 = call <16 x float> @llvm.rint.v16f32(<16 x float> undef)
+
+ %F64 = call double @llvm.rint.f64(double undef)
+ %V2F64 = call <2 x double> @llvm.rint.v2f64(<2 x double> undef)
+ %V4F64 = call <4 x double> @llvm.rint.v4f64(<4 x double> undef)
+ %V8F64 = call <8 x double> @llvm.rint.v8f64(<8 x double> undef)
+
+ ret i32 undef
+}
+
+define i32 @trunc(i32 %arg) {
+; SSE2-LABEL: 'trunc'
+; SSE2-NEXT: Cost Model: Found an estimated cost of 10 for instruction: %F32 = call float @llvm.trunc.f32(float undef)
+; SSE2-NEXT: Cost Model: Found an estimated cost of 43 for instruction: %V4F32 = call <4 x float> @llvm.trunc.v4f32(<4 x float> undef)
+; SSE2-NEXT: Cost Model: Found an estimated cost of 86 for instruction: %V8F32 = call <8 x float> @llvm.trunc.v8f32(<8 x float> undef)
+; SSE2-NEXT: Cost Model: Found an estimated cost of 172 for instruction: %V16F32 = call <16 x float> @llvm.trunc.v16f32(<16 x float> undef)
+; SSE2-NEXT: Cost Model: Found an estimated cost of 10 for instruction: %F64 = call double @llvm.trunc.f64(double undef)
+; SSE2-NEXT: Cost Model: Found an estimated cost of 21 for instruction: %V2F64 = call <2 x double> @llvm.trunc.v2f64(<2 x double> undef)
+; SSE2-NEXT: Cost Model: Found an estimated cost of 42 for instruction: %V4F64 = call <4 x double> @llvm.trunc.v4f64(<4 x double> undef)
+; SSE2-NEXT: Cost Model: Found an estimated cost of 84 for instruction: %V8F64 = call <8 x double> @llvm.trunc.v8f64(<8 x double> undef)
+; SSE2-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret i32 undef
+;
+; SSE42-LABEL: 'trunc'
+; SSE42-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F32 = call float @llvm.trunc.f32(float undef)
+; SSE42-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F32 = call <4 x float> @llvm.trunc.v4f32(<4 x float> undef)
+; SSE42-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V8F32 = call <8 x float> @llvm.trunc.v8f32(<8 x float> undef)
+; SSE42-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %V16F32 = call <16 x float> @llvm.trunc.v16f32(<16 x float> undef)
+; SSE42-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F64 = call double @llvm.trunc.f64(double undef)
+; SSE42-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V2F64 = call <2 x double> @llvm.trunc.v2f64(<2 x double> undef)
+; SSE42-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V4F64 = call <4 x double> @llvm.trunc.v4f64(<4 x double> undef)
+; SSE42-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %V8F64 = call <8 x double> @llvm.trunc.v8f64(<8 x double> undef)
+; SSE42-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret i32 undef
+;
+; AVX-LABEL: 'trunc'
+; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F32 = call float @llvm.trunc.f32(float undef)
+; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F32 = call <4 x float> @llvm.trunc.v4f32(<4 x float> undef)
+; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8F32 = call <8 x float> @llvm.trunc.v8f32(<8 x float> undef)
+; AVX-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V16F32 = call <16 x float> @llvm.trunc.v16f32(<16 x float> undef)
+; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F64 = call double @llvm.trunc.f64(double undef)
+; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V2F64 = call <2 x double> @llvm.trunc.v2f64(<2 x double> undef)
+; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F64 = call <4 x double> @llvm.trunc.v4f64(<4 x double> undef)
+; AVX-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V8F64 = call <8 x double> @llvm.trunc.v8f64(<8 x double> undef)
+; AVX-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret i32 undef
+;
+; AVX512-LABEL: 'trunc'
+; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F32 = call float @llvm.trunc.f32(float undef)
+; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F32 = call <4 x float> @llvm.trunc.v4f32(<4 x float> undef)
+; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8F32 = call <8 x float> @llvm.trunc.v8f32(<8 x float> undef)
+; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V16F32 = call <16 x float> @llvm.trunc.v16f32(<16 x float> undef)
+; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F64 = call double @llvm.trunc.f64(double undef)
+; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V2F64 = call <2 x double> @llvm.trunc.v2f64(<2 x double> undef)
+; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F64 = call <4 x double> @llvm.trunc.v4f64(<4 x double> undef)
+; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8F64 = call <8 x double> @llvm.trunc.v8f64(<8 x double> undef)
+; AVX512-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret i32 undef
+;
+; SLM-LABEL: 'trunc'
+; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F32 = call float @llvm.trunc.f32(float undef)
+; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F32 = call <4 x float> @llvm.trunc.v4f32(<4 x float> undef)
+; SLM-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V8F32 = call <8 x float> @llvm.trunc.v8f32(<8 x float> undef)
+; SLM-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %V16F32 = call <16 x float> @llvm.trunc.v16f32(<16 x float> undef)
+; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F64 = call double @llvm.trunc.f64(double undef)
+; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V2F64 = call <2 x double> @llvm.trunc.v2f64(<2 x double> undef)
+; SLM-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V4F64 = call <4 x double> @llvm.trunc.v4f64(<4 x double> undef)
+; SLM-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %V8F64 = call <8 x double> @llvm.trunc.v8f64(<8 x double> undef)
+; SLM-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret i32 undef
+;
+; GLM-LABEL: 'trunc'
+; GLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F32 = call float @llvm.trunc.f32(float undef)
+; GLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F32 = call <4 x float> @llvm.trunc.v4f32(<4 x float> undef)
+; GLM-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V8F32 = call <8 x float> @llvm.trunc.v8f32(<8 x float> undef)
+; GLM-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %V16F32 = call <16 x float> @llvm.trunc.v16f32(<16 x float> undef)
+; GLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F64 = call double @llvm.trunc.f64(double undef)
+; GLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V2F64 = call <2 x double> @llvm.trunc.v2f64(<2 x double> undef)
+; GLM-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V4F64 = call <4 x double> @llvm.trunc.v4f64(<4 x double> undef)
+; GLM-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %V8F64 = call <8 x double> @llvm.trunc.v8f64(<8 x double> undef)
+; GLM-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret i32 undef
+;
+; BTVER2-LABEL: 'trunc'
+; BTVER2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F32 = call float @llvm.trunc.f32(float undef)
+; BTVER2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F32 = call <4 x float> @llvm.trunc.v4f32(<4 x float> undef)
+; BTVER2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8F32 = call <8 x float> @llvm.trunc.v8f32(<8 x float> undef)
+; BTVER2-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V16F32 = call <16 x float> @llvm.trunc.v16f32(<16 x float> undef)
+; BTVER2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F64 = call double @llvm.trunc.f64(double undef)
+; BTVER2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V2F64 = call <2 x double> @llvm.trunc.v2f64(<2 x double> undef)
+; BTVER2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F64 = call <4 x double> @llvm.trunc.v4f64(<4 x double> undef)
+; BTVER2-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V8F64 = call <8 x double> @llvm.trunc.v8f64(<8 x double> undef)
+; BTVER2-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret i32 undef
+;
+ %F32 = call float @llvm.trunc.f32(float undef)
+ %V4F32 = call <4 x float> @llvm.trunc.v4f32(<4 x float> undef)
+ %V8F32 = call <8 x float> @llvm.trunc.v8f32(<8 x float> undef)
+ %V16F32 = call <16 x float> @llvm.trunc.v16f32(<16 x float> undef)
+
+ %F64 = call double @llvm.trunc.f64(double undef)
+ %V2F64 = call <2 x double> @llvm.trunc.v2f64(<2 x double> undef)
+ %V4F64 = call <4 x double> @llvm.trunc.v4f64(<4 x double> undef)
+ %V8F64 = call <8 x double> @llvm.trunc.v8f64(<8 x double> undef)
+
+ ret i32 undef
+}
+
+declare float @llvm.ceil.f32(float)
+declare <4 x float> @llvm.ceil.v4f32(<4 x float>)
+declare <8 x float> @llvm.ceil.v8f32(<8 x float>)
+declare <16 x float> @llvm.ceil.v16f32(<16 x float>)
+
+declare double @llvm.ceil.f64(double)
+declare <2 x double> @llvm.ceil.v2f64(<2 x double>)
+declare <4 x double> @llvm.ceil.v4f64(<4 x double>)
+declare <8 x double> @llvm.ceil.v8f64(<8 x double>)
+
+declare float @llvm.floor.f32(float)
+declare <4 x float> @llvm.floor.v4f32(<4 x float>)
+declare <8 x float> @llvm.floor.v8f32(<8 x float>)
+declare <16 x float> @llvm.floor.v16f32(<16 x float>)
+
+declare double @llvm.floor.f64(double)
+declare <2 x double> @llvm.floor.v2f64(<2 x double>)
+declare <4 x double> @llvm.floor.v4f64(<4 x double>)
+declare <8 x double> @llvm.floor.v8f64(<8 x double>)
+
+declare float @llvm.nearbyint.f32(float)
+declare <4 x float> @llvm.nearbyint.v4f32(<4 x float>)
+declare <8 x float> @llvm.nearbyint.v8f32(<8 x float>)
+declare <16 x float> @llvm.nearbyint.v16f32(<16 x float>)
+
+declare double @llvm.nearbyint.f64(double)
+declare <2 x double> @llvm.nearbyint.v2f64(<2 x double>)
+declare <4 x double> @llvm.nearbyint.v4f64(<4 x double>)
+declare <8 x double> @llvm.nearbyint.v8f64(<8 x double>)
+
+declare float @llvm.rint.f32(float)
+declare <4 x float> @llvm.rint.v4f32(<4 x float>)
+declare <8 x float> @llvm.rint.v8f32(<8 x float>)
+declare <16 x float> @llvm.rint.v16f32(<16 x float>)
+
+declare double @llvm.rint.f64(double)
+declare <2 x double> @llvm.rint.v2f64(<2 x double>)
+declare <4 x double> @llvm.rint.v4f64(<4 x double>)
+declare <8 x double> @llvm.rint.v8f64(<8 x double>)
+
+declare float @llvm.trunc.f32(float)
+declare <4 x float> @llvm.trunc.v4f32(<4 x float>)
+declare <8 x float> @llvm.trunc.v8f32(<8 x float>)
+declare <16 x float> @llvm.trunc.v16f32(<16 x float>)
+
+declare double @llvm.trunc.f64(double)
+declare <2 x double> @llvm.trunc.v2f64(<2 x double>)
+declare <4 x double> @llvm.trunc.v4f64(<4 x double>)
+declare <8 x double> @llvm.trunc.v8f64(<8 x double>)
More information about the llvm-commits
mailing list